Solid Embossed Diamond Nkyerɛwee Polycarbonate Krataa | PC Panels a wɔtɔn no kɛse

Solid Diamond Embossed Polycarbonate Krataa a ɛma hann trɛw ne kokoamsɛm

Wallis solid diamond embossed polycarbonate sheet yɛ PC panel a ɛyɛ den a ɛyɛ textured a wɔayɛ ama adansi glazing, ɔdan atifi, skylights, mpaapaemu, kokoam screens, canopies, signage, displays ne industrial ahobammɔ applications.

Diamond a wɔakyerɛw so no pete hann tẽẽ, ɛtew hann a ano yɛ den so na ɛmma wontumi nhu baabi a wotumi hu pefee bere a ɛda so ara ma abɔde mu hann fa panel no mu no. Wei ma ɛfata ma nnwuma a ɛhwehwɛ sɛ hann a ɛtrɛw, aniwa so kokoamsɛm, nkɛntɛnso a ɛko tia ne ahosiesie a ɛkari pɛ.

Wɔde ɔbaabun polycarbonate resin na ɛyɛe, Wallis textured PC panels wɔ hɔ wɔ 1–20mm thickness , trɛw kɔ 2100mm , gyinapɛn export tenten 5800mm ne 6000mm, ne customized twa akɛse. Kɔla ahorow a ɛwɔ hɔ no bi ne pefee, ahabammono, opal, kɔbere, bruu, borɔdɔma ne kɔkɔɔ.

Wobetumi de UV-protected grades ama de adi dwuma wɔ abɔnten. Ɛsɛ sɛ adetɔfoɔ kyerɛ sɛ UV ahobanbɔ ho hia wɔ ɔfa baako anaa afã mmienu no nyinaa, ne beaeɛ a wɔbɛyɛ adwuma no, akwankyerɛ a wɔde besisi hɔ ne abɔnten so dwumadie tebea a wɔhwɛ kwan.

Diamond Textured Polycarbonate Krataa no ho nsɛm

Hyɛ no nsow: Ɛsɛ sɛ wosi hann a wɔde fa so, ahoɔden a ɛbɔ, ogya adwumayɛ, UV warranty, span a wɔma ho kwan, bending radius ne abɔnten so som nkwa nna so dua ma ne kɛse, kɔla ne UV nhyehyɛe a wɔahyɛ no pɛpɛɛpɛ.

Mfiridwuma mu Agyapade Ho Nsɛm

Pon a edidi so yi de Wallis nneɛma a wɔakyerɛw mprempren no ho nsɛm ne mfiridwuma mu akuw a wɔateɛteɛ mu bom. Ɛsɛ sɛ wɔsi gyinapɛn ahorow a enni sɔhwɛ kwan a wɔaka ho asɛm no so dua de toto mfiridwuma ho nsɛm krataa a etwa to anaa batch sɔhwɛ amanneɛbɔ no so ansa na wɔde adi dwuma sɛ apam mu nkyerɛkyerɛmu.

Ɛnsɛ sɛ wɔde mfiridwuma mu gyinapɛn ahorow no kɔ nkratafa kɔla ahorow, UV grade ahorow, nnuru a wɔasan de adi dwuma a wɔde yɛ nneɛma anaa nea ɛwɔ soro no ntam. Bisa TDS a etwa to no ma nneɛma nhyehyɛe pɔtee no.

Solid Embossed Diamond Nkyerɛwee Polycarbonate Krataa

Dɛn Ne Polycarbonate Krataa a Wɔde Diamond Nkyerɛwee?

Diamond embossed polycarbonate yɛ PC krataa a ɛyɛ den a ɛwɔ soro nsusuwso a ɛkɔ soro anaasɛ ɛkɔ mu mpɛn pii. Mpɛn pii no, wɔyɛ nkyerɛwee no bere a wɔreyɛ krataa no, na ɛma wonya ɔfasu a wɔaka abom mmom sen sɛ wɔbɛyɛ afɛfɛde a wɔatintim a ɛyɛ soronko.

Sɛ hann du textured surface no so a, diamond geometry no sesa ɔkwan a ɛkɔ ne nea ɛdannan no. Eyi ma hann a ɛyɛ mmerɛw na ɛtrɛw kɛse sen panel a ɛyɛ mmerɛw a ɛyɛ mmerɛw a ɛyɛ mmerɛw na ɛma nneɛma a ɛwɔ krataa no akyi no ntumi nhu pefee.

Hann a Ɛtrɛw

Textured surface no pete hann a ɛba no wɔ akwan horow pii so, ɛtew concentrated bright spots na ɛma kanea a ɛyɛ mmerɛw ma skylights, partitions, decorative panels ne kanea afã horow.

Glare a Wɔtew So

Sɛ wɔde toto baabi a ɛyɛ hyerɛnn a ɛyɛ torotoro ho a, diamond embossing ma specular reflection tẽẽ na ebetumi aboa ma wɔadi hann a ano yɛ den so wɔ adansi anaa dan mu mmeae a kanea a ɛhyerɛn wɔ hɔ.

Semi-Privacy Nsɛm a Wɔde Sie

Nsusuwii a ɛwɔ soro no kyinkyim nsɛm a wotumi hu wɔ panel no akyi bere a ɛda so ara de hann kɔ no. Enti ɛho wɔ mfaso ma mpaapaemu, apon, kokoam screens ne decorative glazing baabi a ɛho nhia sɛ opacity koraa.

Nneɛma a Wɔde Asiesie Nneɛma

Diamond nsusuwso de bun, nsusuwii ne aniwa a ɛkɔ soro ka ho, na ɛma krataa no tumi yɛ adwuma sɛ mfiridwuma mu ahwehwɛ a wɔde yɛ ahwehwɛ ne adansi ho mfonini a wɔde asiesie.

Mfaso Titiriw a Ɛwɔ Diamond Textured PC Panels So

Nkɛntɛnso a Ɛkorɔn a Ɛko Tia

Polycarbonate a ɛyɛ den ma nsunsuanso a ɛkorɔn a ɛko tia glazing, mpaapaemu, mfiri awɛmfo ne ahobammɔ panels. Ɛnyɛ nea ɛda adi sɛ ahwehwɛ a ɛyɛ mmerɛw sɛ ebebubu asinasin a ano yɛ nnam a ɛyɛ hu bere a abɔ no wɔ akwanhyia mu akyi.

Ade a Ɛyɛ Hare a Wɔde Si Ahwehwɛ ananmu

Esiane sɛ ne density bɛyɛ 1.2g/cm³, polycarbonate yɛ hare kɛse sen ahwehwɛ. Eyi betumi atew akwantu mu duru, nsaanodwuma a ɛyɛ den ne nhyehyɛe mu adesoa so.

Decorative Privacy a Wonsiw Hann Nyinaa Siw

Diamond texture ma aniwa screening ne hann a ɛyɛ mmerɛw a ɛmma ɔfasu a ɛnyɛ hann koraa, na ɛma ɛfata ma adwumayɛbea, aguaree, ɔmanfo adan ne aguadidan mu.

Amanneɛbɔ a Ɛyɛ Den ne Kɔla ahorow

Wallis boa pefee, opal, kɔbere, bruu, ahabammono, borɔdɔma ne kɔkɔɔ a wɔpaw wɔ ne kɛse ne panel nsusuwii ahorow mu ma adwuma pɔtee bi aniwa ne adwumayɛ ahwehwɛde.

Fabrication a Ɛnyɛ Den

Wobetumi atwitwa PC grades a ɛfata, atutu, ayɛ routed, awɔw mu bent na wɔayɛ no thermoformed. Eyi ma fabricators tumi yɛ nsakrae kɛse ma amanne nsɛnkyerɛnne, curved structures, ahobammɔ panels ne architectural components.

Abɔnten so UV-Protected Options

Co-extruded UV-protected configurations boa ma yellowing ne degradation so tew bere a wɔde wɔn ho ahyɛ abɔnten so no. Ɛsɛ sɛ abɔnten so nnwuma de UV grade a ɛfata di dwuma na wɔde beae a wɔabɔ ho ban a ɛhwɛ owia no si hɔ.

Diamond Textured vs Polycarbonate krataa a ɛyɛ mmerɛw

Diamond Embossed Polycarbonate Nkratafa a Wɔde Di Dwuma

Mfinimfini Nkyekyɛmu ne Kokoam Nsɛm Ho Screens

Diamond textured panels ma abɔde anaa artificial hann fa mu bere a ɛma wotumi hu ade kɔ akyiri, na ɛma ɛfata ma office mpaapaemu, aguaree screens, dan mu mpaapaemu ne semi-private public spaces.

Wim Kanea ne Awia Hann Panels

Nea wɔakyerɛw so no ma awia hann a ɛba no trɛw na ɛboa ma hann a ɛhyerɛn kɛse no so tew. Wobetumi asusuw grade ahorow a UV abɔ ho ban ho ama wim ahwehwɛ ne ɔdan atifi kanea a wɔde di dwuma a egyina adansi ne nea wɔde besisi so ho ahwehwɛde ahorow so.

Canopies, Awnings ne Akwan a Wɔde Nantew a Wɔakata So

Polycarbonate a ɛyɛ hare a wɔakyerɛw so no ma dabere a ɛrentumi nsɛe bere a ɛma awia hann a ɛtrɛw kɔ abrannaa, abrannaa, akwan a wɔfa so nantew ne mmeae a aguadi kata so no.

Adansi ne Nneɛma a Wɔde Asiesie Glazing

Wobetumi de diamond no ani ayɛ ade a wɔde siesie nneɛma wɔ ɔfasu ho ntama, apon, atriums, aguadidan mu nneɛma, dan mu nneɛma ne mmeae a wɔakyerɛw din wɔ so.

Nsɛnkyerɛnne ne Nneɛma a Wɔde Kyerɛkyerɛ

Textured PC panels ma akyi soronko anaasɛ hann-trɛw soro ma nsɛnkyerɛnne, ɔyɛkyerɛ displays, point-of-sale fixtures ne hann asiesie nneɛma.

Mfiri Awɛmfo ne Industrial Screens

Wobetumi de PC a ɛyɛ den a ɛko tia nsunsuanso adi dwuma ama akwanside ahorow a ɛbɔ ho ban ne nnwinnade a wɔabɔ ho ban wɔ baabi a ɛho nhia sɛ wɔde optical transparency a edi mũ di dwuma. Ɛsɛ sɛ wɔhwɛ sɛnea mfiri-awɛmfo fata no de toto ahobammɔ gyinapɛn ne nkɛntɛnso a wɔhwehwɛ no ho.

Greenhouse ne Kuadwuma Ho Nneɛma a Wɔde Yɛ Adwuma

Wobetumi asusuw UV-protected textured panels ho ama kuayɛ glazing a wɔapaw wɔ baabi a hann a ɛtrɛw so wɔ mfaso. Ɛsɛ sɛ wɔhwehwɛ nnɔbae-hann a wɔhwehwɛ, krataa no mu duru ne ɔhyew adwumayɛ mu ma greenhouse nhyehyɛe pɔtee no.

Diamond Textured PC Krataa a Wɔde Di Dwuma

Sɛnea Wobɛpaw Diamond PC Krataa a Ɛfata

1. Si so dua sɛ ɛyɛ den a wɔhwehwɛ

Wobetumi de nkratafa a ɛyɛ tratraa adi dwuma de asiesie nneɛma a wɔde kata so, nsɛnkyerɛnne ne nnua a wɔde gyina akyi, bere a ntama a ɛyɛ den ma ɛyɛ den kɛse ma mpaapaemu, ntama a ɛbɔ ho ban ne adansi nneɛma akɛse. Ɛsɛ sɛ wɔde panel dimensions, support spacing ne load requirements na ɛpaw final thickness.

2. Paw Kɔla ne Hann a Wɔde Kɔma

Grades a emu da hɔ anaasɛ ɛyɛ hare ma awia hann pii, bere a opal, kɔbere ne kɔla tuntum ma kokoamsɛm kɛse na hann a wotumi hu no nkɔ baabiara. Bisa honam fam nhwɛsode ahorow wɔ baabi a kɔla anaa kokoamsɛm adwumayɛ ho hia.

3. Si so dua sɛ wode bedi dwuma wɔ dan mu anaa abɔnten

Ebia ɛho renhia sɛ wɔde UV ahobammɔ te sɛ abɔnten so ahwehwɛ a wɔde hyɛ mu no. Ɛsɛ sɛ abɔnten so dwumadie no kyerɛ UV ahobanbɔ a ɛwɔ ɔfã baako anaa ɔfa mmienu na wɔhwɛ hu sɛ wɔde ɔfa a wɔabɔ ho ban no ahyɛ baabi a owia bɛbɔ.

4. Kyerɛkyerɛ Kokoam Nsɛm a Wɔhwehwɛ mu

Kokoamsɛm gyina diamond kɛse, texture bun, krataa kɔla, panel thickness, kanea akwankyerɛ ne hwɛ kwan so. Wɔkamfo nhwɛsode nhwehwɛmu kyerɛ ansa na wɔayɛ mpaapaemu anaa kokoam-screen nnwuma akɛse.

5. Si Fabrication Ahwehwɛde ahorow so dua

Ka kyerɛ Wallis sɛ ebia wɔbɛtwa krataa no, wɔatutu, CNC routed, awɔw mu bent, thermoformed, print anaasɛ bonded. Ebia ɛho behia sɛ wɔyɛ nneɛma a wɔde yɛ nneɛma ho sɔhwɛ ahorow ma nsusuwii ahorow a ɛyɛ den ne nnwuma a ɛfa sɛnea ɛte ho.

6. Si Texture Orientation no so dua

Si so dua sɛ ebia ɛsɛ sɛ embossed surface no hwɛ ɔfã a wotumi hu, ɔfã a wɔabɔ ho ban anaa ɔfã a ɛwɔ mu wɔ installation no mu. Ɔkwan a wɔfa so kyerɛ ade no betumi aka sɛnea ɔte, ahotew ne kokoamsɛm a wɔde hwɛ ade.

Akwankyerɛ a ɛfa Twitwa, Tutu ne Nneɛma a Wɔyɛ ho

Saw Twitwa ne CNC Routing

Wobetumi de saw blades a ɛyɛ fɛ a ɛfata anaa CNC nnwinnade a wɔayɛ ama plastic atwitwa diamond polycarbonate. Ɛsɛ sɛ wɔboa krataa no koraa na ama wosow ne anoano a ɛyɛ mmerɛw no so atew.

Drill a wɔde tu fam

Fa drills a ano yɛ nnam a ɛfata ma polycarbonate di dwuma na kwati nhyɛso anaa ɔhyew a ɛboro so. Ɛsɛ sɛ abɔnten so ntokuru a wɔde kyekyere nneɛma no ka baabi a ɛfata a ɛbɛma ɔhyew atrɛw.

Awɔw mu Bending

Wobetumi ayɛ nkratafa no mu duru bi a ɛyɛ nwini a ɛyɛ nwini wɔ benkum a ɛba fam koraa a ɛfata mu. Sɛ wɔkotow denneennen dodo a, ebetumi ama adwennwen, akyinkyim anaasɛ apaapae bere tenten.

Nneɛma a wɔde yɛ ɔhyew

Wobetumi ayɛ polycarbonate thermoformed bere a wɔayow sɛnea ɛfata na wɔahyɛ ɔhyew a wɔahyɛ so akyi. Ebia sɛ wɔde diamond no yɛ nea emu dɔ a, ɛbɛtrɛw anaasɛ ɛbɛkyinkyim daimond no wɔ aniwa so, enti wɔkamfo kyerɛ sɛ wɔnyɛ nhwɛsode no mu nhwehwɛmu.

Ntintim ne Bonding

Ɛsɛ sɛ wɔsɔ ink, adhesive ne sealant nhyehyɛe ahorow hwɛ sɛ ɛne polycarbonate hyia anaa. Nnuru a wɔde siw ano a ano yɛ den betumi ama adwennwen mu apaapae anaasɛ asɛe asase ani.

Nneɛma a Ɛsɛ sɛ Wosusuw Ho wɔ Installation ho

Ma kwan ma Ɔhyew Ntrɛwmu

Polycarbonate trɛw bɛyɛ 0.065mm wɔ mita biara mu wɔ 1°C ɔhyew nsakrae biara mu. Ɛsɛ sɛ frame, ntokuru ne edge clearances ma kwan ma wotumi tu sen sɛ wobɛkyekyere panel no denneennen.

Fa UV Side no hyɛ mu yiye

Wɔ nkratafa a UV abɔ ho ban a ɛwɔ ɔfã biako so no, ɛsɛ sɛ baabi a wɔabɔ ho ban a wɔahyɛ no agyirae no hwɛ owia hann. Ma sini a ɛbɔ wo ho ban a ɛma wohu no nkɔ so kosi sɛ wobesi sɛnea ɛkyerɛ kwan no so dua.

Kwati sɛ Wobɛkyekyere Nneɛma a Wɔde kyekyere Nneɛma a Ɛyɛ Den dodo

Fasteners a wɔahyɛ no den dodo betumi ama mpɔtam hɔ nhyɛso, mpaapaemu anaasɛ panel distortion a wotumi hu aba. Fa washers ne gaskets a ɛne no hyia di dwuma de kyekyɛ nhyɛso.

Fa Sealants a Ɛfata Di Dwuma

Ɛsɛ sɛ wosi so dua sɛ nneɛma a wɔde kata so ne nea wɔde nkata so no ne polycarbonate hyia na enni nnuru anaa plasticizers a ebetumi atow ahyɛ krataa no so.

Ahotew ne Nsiesiei

Fa nsuo pa, aduru a ɛnyɛ den a ɛne polycarbonate hyia ne ntama a ɛyɛ mmerɛw anaa sponge tew PC panels a wɔakyerɛw so no ho. Kwati abrasive pads, scrapers a ano yɛ nnam ne aggressive solvent cleaners.

Esiane sɛ efĩ betumi aboaboa ano wɔ nsusuwso a wɔakyerɛw so no mu nti, hohoro nneɛma nketenkete a ayɛ mmerɛw no ansa na woapopa. Mfa nhyɛso a ɛboro so a ebetumi asɛe nwene a ɛkɔ soro no nni dwuma.

Dɛn Nti na Wopaw Wallis Diamond Textured Polycarbonate?

• Virgin polycarbonate resin a wobetumi apaw

• 1–20mm kɛseyɛ kwan so

• Ntrɛwmu a ɛkɔ 2100mm

• Custom twa tenten ne panel nsusuwii

• Kɔla a emu da hɔ, opal, kɔbere, bruu, ahabammono, borɔdɔma ne kɔkɔɔ

• Abɔnten so abasobɔde ahorow a UV abɔ ho ban

• Hann-trɛw ne kokoam nsɛm texture

• CNC, twa, drilling ne thermoforming mmoa

• Nhwɛsode nhwehwɛmu ansa na wɔayɛ no kɛse

• Amanne ahobammɔ film ne packaging

• OEM / ODM a wɔde ma ma distributors ne project adetɔfo

Nhwehwɛmu ne Sɔhwɛ a Wɔde Yɛ Nneɛma a Ɛyɛ Paara

Nhwehwɛmu a wɔyɛ ma textured polycarbonate no betumi ayɛ nsusuwii susuw, ɔfasu-nsusuwii nhwehwɛmu, hann a ɛkɔ, ahum, nkɛntɛnso adwumayɛ, UV onyin ne sɛnea ɛte ho nhwehwɛmu.

Nsɛm a Ɛho Hia Na Wɔafa Asɛm a Wɔafa Ka a Ɛyɛ Pɛpɛɛpɛ

• Nea wɔhwehwɛ sɛ ɛyɛ den

• Trɛw ne ne tenten a wɔhwehwɛ

• Nkratafa a ɛyɛ ma anaasɛ wɔatwa no sɛnea ne kɛse te

• Kɔla a wɔhwehwɛ

• Dodow a wɔhwehwɛ

• Wɔde di dwuma wɔ dan mu anaa abɔnten

• UV ahobammɔ a ɛwɔ ɔfã biako anaa abien

• Ɛho hia sɛ wɔde hann kɔ anaasɛ kokoam nsɛm

• Texture afã a wɔde kyerɛ

• Twitwa, drilling, bending anaa thermoforming ahwehwɛde ahorow

• Ogya-adwumayɛ ahwehwɛde

• Beae a wɔbɛyɛ adwuma no ne ɔsom mu hyew

• Protective-film ahwehwɛde

• Nneɛma a wɔde kyekyere nneɛma ne nea wɔde kɔma ho ahwehwɛde ahorow

Wiase Nyinaa B2B Nneɛma a Wɔde Ma

Wallis de polycarbonate nkratafa a wɔakyerɛw so ma wɔn a wɔkyekyɛ adansi nneɛma, wɔn a wɔyɛ ahwehwɛ a wɔde yɛ ahwehwɛ, wɔn a wɔyɛ nsɛnkyerɛnne, adwumayɛbea ahorow a wɔde nneɛma kyerɛ, wɔn a wɔyɛ adwuma wɔ dan mu ne wɔn a wɔyɛ mfiridwuma mu nnua.

Company Da biara da Dwumadi

Adetɔfo Nsɛm a Wɔka

Wallis boa nhwɛsode si so dua, nkyerɛkyerɛmu nhwehwɛmu, amanne nsusuwii, nneɛma a wɔde kyekyere ne adwuma no nkitahodi ma amanaman ntam polycarbonate-kratafa adetɔfo.

Nsɛm a Wɔtaa Bisa Fa Diamond Textured Polycarbonate Ho

Dɛn ne polycarbonate krataa a wɔde diamond ayɛ?

Ɛyɛ polycarbonate krataa a ɛyɛ den a ɛwɔ soro a ɛte sɛ daimond a wɔaka abom. Nkyerɛwee no trɛw hann mu, ɛtew hann a ɛhyerɛn so, ɛma kokoamsɛm fã bi na ɛde afɛfɛde a wɔde hwɛ ade ka ho.

Nneɛma a ɛyɛ den bɛn na Wallis betumi de ama?

Mprempren Wallis kyerɛw ne kɛse fi 1–20mm . Textured thicknesses a ɛwɔ hɔ no betumi agyina kɔla, panel trɛw ne dodow a wɔyɛ no kakraa bi so, enti ɛsɛ sɛ wosi nea wɔakyerɛkyerɛ mu pɛpɛɛpɛ no so dua ansa na wɔakra.

Ntrɛwmu bɛn na ɛwɔ hɔ?

Mprempren gyinapɛn ntrɛwmu no bi ne 1220mm, 1560mm, 1820mm ne 2100mm . Wobetumi aka panel trɛw a wɔatwa no sɛnea wɔpɛ nso ho asɛm.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Mprempren Wallis kyerɛw nsɛm a emu da hɔ, ahabammono, opal, kɔbere, bruu, borɔdɔma ne kɔkɔɔ din. Ebia kɔla ahorow a wɔahyɛ da ayɛ no wɔ hɔ a egyina dodow a wɔyɛ ne kɔla a ɛne ne ho hyia ahwehwɛde ahorow so.

So diamond texture ma wonya kokoamsɛm koraa?

Mpɛn pii no ɛma semi-privacy mmom sen sɛ ɛbɛma opacity koraa. Kokoamsɛm gu ahorow sɛnea texture no mu dɔ, kɔla, kanea kwankyerɛ, kwan a wɔfa so hwɛ ne kwan a ɛda panel no ne nneɛma a ɛwɔ n’akyi no ntam.

Ɔkwan bɛn so na sɛnea ɛte no ma hann a ɛhyerɛn no so tew?

Diamond nsusuwso no bɔ hann pete mmom sen sɛ ɛbɛdane anaasɛ ɛde akɔ ɔkwan biako a ɛyɛ den so. Eyi ma ɛyɛ mmerɛw na ɛtrɛw.

Dɛn ne hann a wɔde fa nnipa mu?

Mprempren kratafa no kyerɛ bɛyɛ 50% ma abasobɔde a wɔakyerɛ no. Ankasa nkrasɛm betumi ayɛ soronko kɛse wɔ ne kɛse, kɔla, diamond nsusuwii ne UV nhyehyɛe, enti bisa data ma nhyehyɛe pɔtee.

So wobetumi de diamond polycarbonate adi dwuma wɔ abɔnten?

Yiw, bere a wɔapaw grade a ɛfata a UV abɔ ho ban na wɔde ahyɛ mu yiye no. Si so dua sɛ ebia krataa no wɔ UV ahobammɔ a ɛwɔ ɔfã biako anaa ɔfã abien na fa ɔfã a wɔabɔ ho ban no hyɛ owia hann mu.

So krataa no betumi asi ahwehwɛ ananmu?

Ebetumi asi ahwehwɛ ananmu wɔ ahwehwɛ a wɔde siesie nneɛma pii, kokoamsɛm ne ahwehwɛ a ɛko tia nsunsuanso mu. Ɛsɛ sɛ wɔda so ara hwɛ adansi nhyehyɛe, ogya ho ahwehwɛde, akwanhwɛ a ɛfa aniwa so ne adansi ho mmara ma adwuma biara.

So wobetumi atwitwa krataa no na wɔatu?

Aane. Wobetumi atwitwa, CNC routed na wɔatutu denam plastic-processing nnwinnade a ɛfata so. Ɛsɛ sɛ wɔde krataa no gyina so yiye na ɛsɛ sɛ abɔnten ntokuru ma ɔhyew no tumi kɔ baabiara.

So wobetumi abɔ polycarbonate a wɔakyerɛw so no awɔw mu?

Wobetumi ayɛ nhyehyɛe ahorow bi a ɛyɛ nwini a ɛyɛ nwini wɔ radius a ɛba fam koraa a ɛfata mu. Radius a wɔhwehwɛ no gyina krataa no kɛse, orientation ne installation tebea so.

So wobetumi ayɛ krataa no thermoformed?

Wobetumi ayɛ polycarbonate thermoformed bere a wɔayow sɛnea ɛfata na wɔahyɛ ɔhyew so akyi. Sɛnea wɔyɛ no betumi atrɛw anaasɛ akyinkyim daimond no, enti ɛsɛ sɛ wɔsɔ nhwɛsode bi hwɛ ansa na wɔayɛ no pii.

Ɔfã bɛn na ɛsɛ sɛ ɛhwɛ abɔnten?

Wɔ abɔnten so ɔfã biako UV nkratafa ho no, ɛsɛ sɛ ɔfã a UV abɔ ho ban no hwɛ owia hann. Ɛsɛ sɛ wɔpaw texture orientation sɛnea ɛte, kokoamsɛm, ahotew ne project design.

So polycarbonate a wɔde diamond ayɛ no ntumi nsɛe?

Sɛnea ɛte no betumi ama agyiraehyɛde nketenkete a ɛda adi kɛse wɔ aniwa so sen nea ɛwɔ baabi a ɛhyerɛn a ɛyɛ torotoro, nanso polycarbonate a wɔtaa de di dwuma no ntumi nsɛe. Ɛho hia sɛ wɔde hard-coated grade a ɛyɛ soronko di dwuma wɔ baabi a ɛho hia sɛ ɛko tia abrasion a ɛkorɔn.

Ɔkwan bɛn so na ɛsɛ sɛ wɔhohoro ntama no ho?

Fa nsu a ɛho tew, aduru a wɔde hohoro nneɛma a ɛnyɛ den a ɛne polycarbonate hyia ne ntama a ɛyɛ mmerɛw a ɛnyɛ nea ɛyɛ mmerɛw di dwuma. Hohoro mfutuma ansa na woapopa na kwati nnuru a ano yɛ den a wɔde tew nneɛma ho anaasɛ nneɛma a wɔde tew nneɛma ho a ɛyɛ den.

So Wallis betumi de nnua a wɔatwa no sɛnea wɔpɛ ama?

Aane. Wobetumi aka nsusuwii a wɔatwa no sɛnea wɔpɛ no ho asɛm sɛnea ne kɛse, ne tɛtrɛtɛ, ne dodow, ne boasetɔ ne ne yɛ ahwehwɛde ahorow te.

So metumi abisa nhwɛsode ahorow ansa na makra nneɛma pii?

Aane. Wɔkamfo nhwɛsode nhwehwɛmu kyerɛ sɛ wɔmfa nsi kɔla, nwene, kokoamsɛm, hann a ɛtrɛw, ne kɛse ne nea wɔayɛ no hyia ansa na wɔayɛ no kɛse.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Fa ne kɛseɛ, ne tɛtrɛtɛ, ne tenten, ne kɔla, dodoɔ, ne dan mu anaa abɔnten dwumadie, UV-fã ahwehwɛdeɛ, kokoamsɛm anaa hann-transmission botaeɛ, fabrication ahwehwɛdeɛ ne packaging kwan ma.

Bisa sɛ wɔmfa Diamond Textured Polycarbonate Panels ho nsɛm mma

Worehwehwɛ obi a ɔyɛ diamond embossed polycarbonate krataa ma ɔdan atifi, mpaapaemu, kokoam screens, signage, decorative glazing anaa mfiridwuma panels? Wallis de solid textured PC sheets a wɔayɛ no sɛnea wɔpɛ, kɔla ne nsusuwii ma B2B nnwuma.

Send wo thickness, panel size, kɔla, dodow, UV ahwehwɛde ne application na woanya aduru a ɛfata nyansahyɛ, nhwɛso ne factory quotation.