12mm UV -Ɛko tia Anti-Scratch Polycarbonate ma Padel Asɛnnibea

12mm UV -Ɛko tia Anti-Scratch Polycarbonate sheet ma Padel Asɛnnibea

Wallis 12mm UV -resistant anti-scratch polycarbonate sheet yɛ hard-coated transparent PC panel a wɔayɛ ama padel asɛnnibea ɔfasu nnwuma, abɔnten agumadi enclosures, ahobammɔ glazing ne afoforo a ɛwɔ nkɛntɛnso kɛse transparent ahobammɔ applications. Ɛka ahoɔden a ɛwɔ polycarbonate a ɛyɛ den mu no bom ne ade a wɔde kata so a ɛmma nsɛe a wɔayɛ sɛ ɛbɛma asɛe, akisikuru, nnuru ne abɔnten wim tebea a ɛko tia no atu mpɔn.

Mprempren grade a emu da hɔ no ma hann a wotumi hu no bɛyɛ 90% a wɔakyerɛw ahum a ɛwɔ ase 0.5% . Standard ne customized dimensions no bi ne 1020 × 2040 mm, 1220 × 2440 mm, 1995 × 1995 mm ne 1995 × 2495 mm, bere a wobetumi de afiri abusua a ɛtrɛw no ama fi 1–50 mm kɛse sɛnea adwuma no ahwehwɛde te.

Wɔ padel asɛnnibea ayɛfo ne agumadi-beae adwumayɛfo fam no, 12mm a wɔpaw no de panel ano aduru a ɛda adi pefee, a ɛrentumi nsɛe a UV ahobammɔ ne hard surface coating ma. Ɛsɛ sɛ wɔhwɛ sɛnea ɛfata a etwa to sɛ asɛnnibea nhyehyɛe a edi mũ no fã, a nea ɛka ho ne panel no stiffness, frame design, fastening, ball rebound, thermal expansion, mframa adesoa ne mpɔtam hɔ anaa federation ahwehwɛde ahorow a ɛfata.

UV -Ɛko tia Anti-Scratch Hard-Coated Polycarbonate sheet

12mm Padel Court Polycarbonate sheet wɔ Ahwɛyiye mu

Nea ɛho hia: 12mm kɛse nkutoo nkyerɛ sɛ wobedi padel asɛnnibea gyinapɛn pɔtee bi anaa akansi homologation so. Ɛsɛ sɛ wɔgye panel nsusuiɛ a ɛtwa toɔ, frame spacing, fastening system, structural loading, surface behavior ne ball rebound di dwuma ma asɛnnibea nhyehyɛɛ a edi mũ.

Nneɛma a Wɔyɛ no Ho Nsɛm

Hard-Coating Adwumayɛ Sɔhwɛ Aba

Nneɛma a edidi so yi gyina Wallis coating test data a wɔakyerɛw mprempren no so. Ɛsɛ sɛ adetɔfoɔ a wɔhwehwɛ apam mu mfiridwuma ho nkyerɛkyerɛmu bisa TDS a ɛfata, sɔhwɛ amanneɛbɔ ne adeyɛ nhwɛsoɔ a wɔapene so ama grade a wɔahyɛ no.

Dɛn Nti na Wɔde Polycarbonate a Wɔakata so Den Di Dwuma Ma Padel Asɛnnibea Nnwuma?

Nkɛntɛnso a Ɛkorɔn a Ɛko Tia

Wɔpaw polycarbonate a ɛyɛ den ma ahobammɔ dwumadie a ɛda adi pefee ɛnam sɛ ɛko tia nsunsuansoɔ kɛseɛ ne suban a ɛko tia abubuo nti. Wɔ agumadi mmeae fam no, eyi betumi atew asiane a ɛwɔ hɔ sɛ panel no mu apaapae a asiane wom no so bere a wɔde toto nneɛma a wɔde yɛ ahwehwɛ a ɛyɛ mmerɛw ho no.

UV Ahobanbɔ ma Abɔnten so Nneɛma a Wɔde Sisi

Polycarbonate a ɛda adi wɔ abɔnten no hwehwɛ sɛ wɔbɔ UV ahobammɔ efisɛ owia a wɔde di dwuma bere tenten no betumi aka sɛnea aniwa no hwɛ ne nneɛma no adwumayɛ. UV -resistant adansi no yɛ nea wɔayɛ sɛ ɛbɛma wim tebea adwumayɛ atu mpɔn ama agumadi a ɛda adi ne glazing dwumadie.

Anti-Scratch Hard Coating a ɛyɛ den a wɔde kata so

Ɛnyɛ den koraa sɛ wɔbɛtwetwe polycarbonate a wɔde di dwuma daa no. A hard surface coating ma abrasion resistance tu mpɔn bere a wɔrehohoro, adi ho dwuma na wɔde adi dwuma mpɛn pii, na ɛboa ma asɛnnibea nnua a ɛyɛ mmerɛw ma wotumi hu ade yiye bere tenten.

Optical Clarity a Ɛkorɔn

Mprempren nhwɛsode a emu da hɔ a wɔakyerɛw din no wɔ bɛyɛ 90% a wotumi hu hann a ɛkɔ ne ahum a ɛba fam 0.5%, a ɛboa asɛnnibea a ɛda adi pefee a agofomma, ɔhwɛfo ne mfoninitwa afiri a wotumi hu ho hia.

Nnuru ne Nsu a Ɛko Tia

Wɔayɛ ade a wɔde kata so a ɛyɛ den no sɛnea ɛbɛyɛ a ɛbɛma nneɛma a atwa yɛn ho ahyia ne tebea horow a wɔtaa de tew nneɛma ho no atumi ako atu mpɔn. Ɛsɛ sɛ wɔda so ara hwɛ sɛ nnuru no hyia ansa na wɔde nnuru a ano yɛ den a wɔde tew nneɛma ho, nnuru a wɔde siw ano anaa nnuru a wɔde siesie adi dwuma.

Amanneɛbɔ Panel Nsusuwii

Wallis betumi de standard sheets anaa project-specific dimensions ama sɛnea padel court frame geometry, tokuru gyinabea ne installation ahwehwɛde ahorow te. Ɛsɛ sɛ adetɔfo de mfonini ahorow ma ansa na wɔayɛ ama nnwuma a ɛnyɛ nea wɔahyɛ da ayɛ.

Mfaso a ɛwɔ 12mm Hard-Coated PC Krataa so

Padel Court Ɔfasuo Adwumayɛ ho Ahwehwɛdeɛ

Ɛnyɛ honam fam ahoɔden nkutoo na ɛsɔ ɔfasu a ɛda adi pefee a wɔde yɛ padel asɛnnibea no hwɛ. Ɛsɛ sɛ enclosure a edi mũ no ma geometry a ɛyɛ pintinn, agodibea a ɛyɛ torotoro ne bɔɔl a wotumi hyɛ ho nkɔm sɛ ɛbɛsan aba bere a ɛda so ara yɛ ahobammɔ ma agodifo no nkitahodi.

Ball Rebound a Ɛyɛ Nkɔso

Polycarbonate stiffness, panel dimensions, support spacing ne fastening nya sɛnea ɔfasu no yɛ n’ade bere a bɔɔl abɔ no so nkɛntɛnso. Ɛsɛ sɛ adetɔfo a wɔreyɛ akansi anaa aguadi asennibea ahorow no gye rebound suban tom wɔ nhyiam a wɔawie no so sen sɛ wobesusuw sɛ ne kɛse nkutoo na ɛkyerɛ adwumayɛ.

Panel Flatness ne Surface Smoothness

Ɛsɛ sɛ agoprama no kɔ so yɛ petee na ɛyɛ torotoro bere a wɔde ahyɛ mu awie no. Ɛsɛ sɛ wɔhwɛ frame tolerances, fastening pressure ne thermal movement so na wɔakwati panel bowing dodo anaasɛ local deformation.

Nneɛma a Wɔde Yɛ Adwuma

Abɔnten asɛnnibea afasu yɛ nhyehyɛe a wɔde yɛ nhyehyɛe a mframa, ɔhyew a ɛsakra, agodifo a wɔne wɔn di nkitaho ne nea ɛbɔ mpɛn pii no fã. Enti ɛsɛ sɛ asɛnnibea yɛfo anaa ɔdansi ho mfiridwumayɛfo no hwɛ panel no nsusuwii, nea ɛboa no ntam kwan, ntokuru, fasteners ne steel-frame design mu.

Federation ne Mpɔtam Hɔ Mmara sodi

Sɛ wɔahyɛ da ayɛ asɛnnibea no sɛ akansi a wɔahyɛ ho mmara, club adansedie anaa ɔmanfoɔ de di dwuma a, si federation, homologation, building-code ne ahobanbɔ ahwehwɛdeɛ a ɛwɔ hɔ no so dua ansa na woapene polycarbonate so sɛ ɔfasuo adeɛ a ɛtwa toɔ.

12mm Polycarbonate vs Tempered Glass ma Padel Asɛnnibea ahorow

Padel Asɛnnibea Akwammisa nkrataa

Padel Asɛnnibea Fasu Panels a ɛda adi pefee

Wobetumi asusuw 12mm hard-coated PC krataa no ho ama padel fasu nhyehyɛe a ɛda adi pefee a ɛho hia sɛ ɛko tia nsunsuanso kɛse, nea wotumi hu no pefee ne abɔnten wim tebea ho ahobammɔ. Ɛsɛ sɛ wɔyɛ panel dimensions ne fixing details ma engineer ma asɛnnibea nhyehyɛe pɔtee no.

Panoramic ne Amanneɛbɔ Asɛnnibea Nnwuma

Ɔfasu mmeae akɛse a ɛda adi pefee no hwehwɛ sɛ wɔhwɛ panel no deflection ne support spacing so yiye. Sɛ wopɛ panoramic designs a, fa dade-frame mfonini a edi mũ, panel nsusuwii, fixing gyinabea ne asɛnnibea gyinapɛn a wɔhwehwɛ ma ansa na wɔapene nneɛma a etwa to so.

Abɔnten Agumadi Ahorow a Wɔabɔ Ho Ban

Padel akyi no, wobetumi de UV -resistant hard-coated PC adi dwuma ama akwanside a ɛda adi pefee ne ahobammɔ panels wɔ agumadibea ahorow a ɛtaa ka nkɛntɛnso, abɔnten so a ɛda adi ne nea wotumi hu ho hia.

Nsusuwii a ɛfa sɛnea wɔde besisi hɔ ma 12mm PC Court Panels

Ma kwan ma Ɔhyew Ntrɛwmu

Polycarbonate trɛw na ɛtwetwe bere a ɔhyew no kɔ so no. Ɛsɛ sɛ wɔyɛ ntokuru, akwan, fasteners ne frame clearances a ɛfata sɛ wɔde kankyee sen sɛ wɔbɛkyekyere panel no denneennen a enni baabi a ɛbɛtrɛw.

Control Panel a Wɔde Di Dwuma

Panel a ɛyɛ den no ka sɛnea ɛte ne sɛnea bɔɔl no san ba no nyinaa. Ɛsɛ sɛ frame ntam kwan ne nea wɔde kyekyere no siw kankyee a ɛboro so ano bere a wɔkwati mpɔtam hɔ nhyɛso a ɛwɔ ntokuru a wɔatu ho no.

Fa Fasteners ne Gaskets a Ɛfata Di Dwuma

Ɛsɛ sɛ mfiri a wɔde siesie nneɛma kyekyɛ nhyɛso no pɛpɛɛpɛ. Washers, gaskets ne frame nneɛma a ɛne ne ho hyia betumi aboa ma wɔasiw adesoa a ɛyɛ den, rattling ne direct metal-to- PC stress ano.

Bɔ Nneɛma a Wɔakata So Den no ho ban

Ma ahobammɔ masking si hɔ bere a wode rekɔ, drilling ne installation wɔ baabiara a ɛbɛyɛ yiye. Kwati sɛ wobɛtwe nnwinnade anaa nneɛma a wɔde yɛ adwuma wɔ baabi a wɔakata so no.

Sɛnea Wobɛpaw PC Krataa ama Padel Asɛnnibea Dwumadi

1. Si Asɛnnibea Su ne Gyinapɛn a Ɛfa Ho no So dua

Ka kyerɛ Wallis sɛ adwuma no yɛ ahomegye asɛnnibea, aguadi kuw asɛnnibea, panoramic asɛnnibea, bere tiaa mu a wɔde besisi hɔ anaa akansi adwuma. Ɛsɛ sɛ wɔkyerɛ mpɔtam hɔ ne fekuw no ahwehwɛde ahorow a ɛfata ansa na wɔapene ɔfasu no so nneɛma no so.

2. Fa Panel Nsusuwii ahorow ma

Fa panel a wɔawie no trɛw ne ne sorokɔ ma sen sɛ wode krataa a wɔanhyehyɛ no kɛse nkutoo bɛma. Ɛsono sɛnea panel akɛse yɛ wɔn ade wɔ panel nketewa ho na ebia ebehia sɛ ɛsono sɛnea wɔde nhyehyɛe no boa.

3. Si so dua sɛ 12mm anaasɛ Thickness Foforo

Ɛwom sɛ 12mm ne nkyerɛkyerɛmu a wɔde asi wɔn ani so wɔ saa ade krataafa yi so de, nanso Wallis bobɔ 1–50mm a ɛtrɛw. Ɛsɛ sɛ wɔkyerɛ ne kɛseɛ a ɛtwa toɔ firi ɔdan no nhyehyɛɛ, mmoa ntam kwan, rebound ahwehwɛdeɛ ne ahobanbɔ akontabuo mu.

4. Si Ɔfã Baako anaa Afã Abien Hard Coating no so dua

Sɛ wopɛ asɛnnibea ɔfasu a ɛda adi sɛ agodifo, bɔɔl, ahotew ne abɔnten tebea wɔ afã abien no nyinaa a, kyerɛ nneɛma a ɛhia sɛ wɔde kata so denneennen ne UV ahobammɔ. Si so dua sɛnea wɔayɛ no pɛpɛɛpɛ ansa na woahyɛ dodow no ara.

5. Fa Tokuru ne Edge Ho Nsɛm ma

Sɛ panels hwehwɛ sɛ wɔadi kan atu ntokuru, slots, CNC mfiri anaa anoano dwumadie a, fa mfonini a ɛwɔ nsusuiɛ a ɛkyerɛ tokuru no ntwemu, mfimfini kwan, anoano kwan ne abodwokyɛreɛ ahwehwɛdeɛ ma.

6. Kyerɛ Abɔnten Wim Tebea

Fa beae a adwuma no besi, ɔhyew a ɛwɔ hɔ, UV a ɛda adi, ɔhyew ne mframa a atwa yɛn ho ahyia ma sɛnea ɛbɛyɛ a wobetumi asusuw nneɛma a wɔde kata so ne nea wɔde besisi hɔ a wɔhwehwɛ no ho yiye.

Nneɛma foforo a wɔde di dwuma wɔ Anti-Scratch Polycarbonate sheet

Saa ara a wɔaka abom a ɛyɛ nea ɛda adi pefee, ɛko tia nsunsuansoɔ ne abrasion-resistant coating no ho wɔ mfasoɔ wɔ mfiridwuma, aguadi ne ahobanbɔ glazing dwumadie mu baabi a polycarbonate a ɛyɛ mpapahwekwa betumi asɛe mmerɛw dodo.

Nneɛma a Wɔyɛ ne Nneɛma a Ɛyɛ Paara a Wɔhwɛ So

Polycarbonate a wɔde akata so denneennen a wɔde yɛ agumadi ne ahobammɔ glazing hwehwɛ sɛ wɔhwɛ base PC krataa no ne ɔkwan a wɔfa so kata so no nyinaa so. Wallis yɛ nhwehwɛmu a egyina adwuma so de boa aniwa ne asase ani adwumayɛ a ɛkɔ so daa.

• Thickness ne dimensional nhwehwɛmu

• Hann a wotumi hu ne haze nhwehwɛmu

• UV onyin ho nhwehwɛmu a wɔyɛe ntɛmntɛm

• Nkɛntɛnso a wɔko tia ho nhwehwɛmu

• Abrasion ne scratch a ɛko tia sɔhwɛ

• Hard-coating adhesion sɔhwɛ

• Nhwehwɛmu a wɔyɛ wɔ sɛnea asase ani te

• Project-specific sample verification ansa na wɔde nneɛma pii ama

Adwumayɛbea ne Hard-Coating Production

PC Panels a Wɔakata so Den no Ahotew ne Nsiesiei

Fa Nnwinnade a Wɔde Hohoro Nneɛma a Ɛnyɛ Abrasive Di Dwuma

Fa ntama a ɛyɛ mmerɛw, nsuo a ɛho tew ne nneɛma a wɔde tew nneɛma ho a wɔagye atom sɛ ɛne polycarbonate ne ade a wɔde kata so a ɛyɛ den no hyia di dwuma. Kwati abrasive pads a ebetumi asɛe ade a ɛyɛ mmerɛw no nkakrankakra.

Si Nnuru a Ɛne Nnuru Nhyia So So dua

Mfa no sɛ ahwehwɛ a wɔde tew nneɛma ho anaa nea wɔde yɛ aduru biara fata ma polycarbonate. Sɛ ɛho hia sɛ wɔde nnuru a ano yɛ den a wɔde tew nneɛma ho, nnuru a wɔde kum mmoawa anaa nnuru a wɔde yi nkyerɛwee a wɔakyerɛw so no fi hɔ a, di kan sɔ hwɛ wɔ nhwɛsode bi so anaasɛ di kan bisa nyansahyɛ a ɛfa nnuru a ɛne ne ho hyia ho.

Hwɛ Fasteners ne Panel Movement mu

Ɛsɛ sɛ asɛnnibea nsiesie ka ho ne nhwehwɛmu a wɔyɛ wɔ panel fixings, gaskets, frame movement ne surface damage. Hardware a ɛnyɛ den anaasɛ kankyee dodo betumi aka panel ahobammɔ ne agodie suban sɛ mpo krataa no ankasa da so ara nsɛee a.

Custom Manufacturing ma Padel Asɛnnibea Adansifo

Wallis boa asɛnnibea adwumayɛfo, agumadi-nwinnade nnwumakuw, wɔn a wɔkyekyɛ ne adwuma no ho adwumayɛfo a wɔhwehwɛ sɛ wɔde polycarbonate a wɔde akata so denneennen a wɔayɛ no sɛnea wɔpɛ.

• 12mm padel asɛnnibea panel a wɔde ma

• 1-50mm customized thickness kwan a wɔfa so yɛ

• Custom krataa ne wie panel dimensions

• Kɔla ahorow a emu da hɔ na wɔayɛ no sɛnea wɔpɛ

• UV -a ɛko tia ɔfasuo ayaresa

• Hard anti-scratch aduru a wɔde kata so

• Project-specific coating-afã nhyehyɛe

• CNC mfiri ne drilling ahwehwɛdeɛ

• Nhwɛsode sɔhwɛ

• Amanne kwan so ahobammɔ masking

• Nneɛma a wɔde kyekyere nneɛma a wɔde kɔ amannɔne

• OEM / adwuma a egyina so de ma

Nsɛm a Ɛho Hia Na Wɔafa Asɛm a Wɔafa Ka a Ɛyɛ Pɛ

• Asɛnnibea su ne gua a wɔde wɔn ani asi so

• Panel no mu duru a wɔhwehwɛ

• Finished panel trɛw ne ne sorokɔ

• Dodow a wɔhwehwɛ

• Frame ntam kwan ne mmoa nhyehyɛe

• Tokuru no kɛse ne tokuru no gyinabea

• Ɔfã biako anaa ɔfã abien a wɔde kata so ahwehwɛde

• UV a ɛda adi ne abɔnten wim tebea

• Ɛho hia sɛ wɔde hann kɔ anaasɛ haze target

• Agumadi, ɔdansi anaa ahobammɔ gyinapɛn a ɛfata

• Ɔkwan a wɔfa so de nneɛma gu mu

• CAD / PDF mfonini wɔ baabi a ɛwɔ hɔ

Wiase Nyinaa B2B Nneɛma a Wɔde Ma

Wallis de polycarbonate nkratafa a wɔde akata so denneennen ma wɔn a wɔyɛ padel asɛnnibea, wɔn a wɔde agumadibea ahorow ma, nnwumakuw a wɔyɛ ahobammɔ ahwehwɛ a ɛda adi pefee, wɔn a wɔyɛ nnwinnade ne wɔn a wɔkyekyɛ a wɔhwehwɛ sɛ wɔde abɔnten ne ahwehwɛ a ɛmma nneɛma ntumi nkɔ mu a wɔayɛ no sɛnea wɔpɛ.

Company Da biara da Dwumadi

Adetɔfo Nsɛm a Wɔka

Wallis de n’adwene si krataa a ɛyɛ papa a ɛyɛ den, adwuma no nkitahodi, nhwɛsode a ɛyɛ nokware ne mmoa a wɔde ma a ɛyɛ mmuae ma amanaman ntam polycarbonate krataa atɔfo so.

Nsɛm a Wɔtaa Bisa Fa 12mm Padel Court PC Krataa

So saa ade yi PET krataa anaa polycarbonate krataa?

Saa ade yi yɛ polycarbonate / PC krataa , ɛnyɛ PET . Mprempren ade no nhwɛso, mfiridwuma mu nsɛm ne nneɛma ho nkyerɛkyerɛmu nyinaa kyerɛ polycarbonate a wɔde akata so denneennen.

So wɔpene 12mm polycarbonate so ara kwa sɛ wɔmfa nyɛ padel asɛnnibea?

Dabi, ɛnyɛ nea ɛyɛ den nkutoo na ɛkyerɛ sɛnea wobedi mmara so. Ɛsɛ sɛ wɔsɔ ɔfasuo nhyehyɛeɛ a ɛdi mũ no hwɛ sɛ ɛyɛ den, bɔɔl no san ba, ne soro yɛ mmerɛw, ɛtumi si so, ɛwɔ dan mu ahobanbɔ ne mpɔtam hɔ anaa akansiɛ mu ahwehwɛdeɛ a ɛfata.

Dɛn ne hann a wɔde fa PC krataa a emu da hɔ no mu?

Nhwɛsode a wɔasɔ ahwɛ a wɔakyerɛw din mprempren no kyerɛ sɛ hann a wotumi hu no bɛyɛ 90% . Ɛsɛ sɛ wɔsi gyinapɛn a etwa toɔ so dua ma adeyɛ no mu duru, nea wɔde kata so ne kɔla a wɔahyɛ no.

Dɛn ne haze bo a wɔakyerɛw no?

Mprempren sɔhwɛ pon no kyerɛw haze a ɛwɔ ase 0.5% . Ɛsɛ sɛ adetɔfo a wɔhwehwɛ apam mu optical specification bisa sɔhwɛ amanneɛbɔ a ɛfata ma batch a wɔahyɛ anaa nhwɛsode a wɔapene so no.

Dɛn nti na ɛsɛ sɛ wɔde kata krataa no so a ɛko tia nsensanee?

Polycarbonate wɔ ahoɔden a ɛko tia nsunsuansoɔ a ɛkyɛn so nanso ne soro a wɔansiesie no tumi twetwe ntɛmntɛm sene ahwehwɛ. A hard coating ma abrasion resistance tu mpɔn bere a wɔrehohoro, bɔɔl contact, installation ne normal adwumayɛ.

So UV ahobammɔ ho hia ma abɔnten padel asɛnnibea ahorow?

UV ahobanbɔ ho hia ma abɔnten polycarbonate efisɛ owia hann a ɛkɔ so bere tenten no betumi aboa ma ayɛ kɔkɔɔ na nsakrae aba wɔ aniwa anaa mfiri adwumayɛ mu.

So wobetumi akata polycarbonate no afã abien no nyinaa so denneennen?

Ɛsɛ sɛ wosi hard-coating nhyehyɛe so dua sɛnea adwuma no te. Sɛ afã abien no nyinaa bɛda agodifo, bɔɔl, ahotew anaa wim tebea mu a, kyerɛ hia a ehia sɛ wɔbɔ ɔfasu abien ho ban bere a worebisa sɛ wɔmfa sika no mma no.

So Wallis betumi ayɛ panel no nsusuwii sɛnea ɔpɛ?

Aane. Wallis kyerɛw akɛseɛ a wɔahyɛ da ayɛ a 1020 × 2040 mm, 1220 × 2440 mm, 1995 × 1995 mm ne 1995 × 2495 mm ka ho, a amanne kwan so nsusuiɛ a ɛwɔ hɔ sɛdeɛ ɛbɛyɛ yie.

So wobetumi atutu PC krataa no anaa CNC mfiri?

Yiw, wobetumi de nnwinnade a ɛfata ne nneɛma a wɔde yɛ adwuma ayɛ polycarbonate. Wɔ padel nnwuma mu no, fa tokuru no ntwemu pɔtee, gyinabea ne ano kwan no ma efisɛ fastening geometry nya structural adwumayɛ so nkɛntɛnso.

So panel no hia baabi a wɔde bɛtrɛw ɔhyew mu?

Aane. Polycarbonate sesa ne nsusuwii bere a ɔhyew no kɔ so no. Ɛsɛ sɛ nhyehyɛe a wɔde si so no ma kwan a ɛfata na ɛnsɛ sɛ ɛkyekyere krataa no denneennen araa ma ɔhyew a ɛkɔ so no de nhyɛso a ɛboro so ba.

So 12mm PC krataa betumi agyina bɔɔl no nkɛntɛnso ne agofomma nkitahodi ano?

Polycarbonate wɔ tumi a ɛko tia nkɛntɛnso kɛse, nanso sɛnea padel ɔfasu yɛ adwuma no gyina panel-ne-frame nhyiam a edi mũ no so. Ɛsɛ sɛ wɔhwɛ panel kɛseɛ, support spacing, fixing design ne load tebea a wɔsan yɛ no mpɛn pii ma asɛnnibea ankasa.

So polycarbonate benya bɔɔl a ɛbɛsan abɔ bio te sɛ ahwehwɛ?

Ɛnyɛ nea ɛba ara kwa. Polycarbonate wɔ su ahorow a ɛsono sɛnea ɛyɛ den sen ahwehwɛ. Ɛsɛ sɛ wɔyɛ ɔfasuo nhyehyɛeɛ a ɛdi mũ no na wɔsɔ hwɛ sɛdeɛ ɛbɛyɛ a wɔbɛnya rebound suban a wɔhwehwɛ ama padel dwumadie a wɔahyɛ da ayɛ no.

So wobetumi de krataa no adi dwuma wɔ osu kɛse ne abɔnten wim tebea mu?

UV -resistant hard-coated grade no yɛ nea wɔayɛ ama abɔnten dwumadie, nanso ɛsɛ sɛ instɔlehyɛn a ɛwie pɛyɛ no nso bu mframa adesoa, nsuo a ɛkɔ, ɔhyew a ɛkɔ, fastening ne wim tebea wɔ beaeɛ a wɔreyɛ adwuma no ho akontaa.

So ade a wɔde kata so a ɛko tia nsensanee no ntumi nsɛe koraa?

Ɛnsɛ sɛ wɔka ɔfasu biara ho asɛm sɛ ɛrentumi nsɛe koraa. Nneɛma a wɔde kata so a ɛyɛ den no ma nwene ne abrabɔ a ɛko tia no tu mpɔn kɛse sɛ wɔde toto PC a wɔansiesie no ho a, nanso nnwinnade a wɔde twitwiw nneɛma, anhwea, ahotew a ano yɛ den anaa nneɛma a ano yɛ nnam da so ara tumi sɛe ɔfasu no.

Ɔkwan bɛn so na ɛsɛ sɛ wɔhohoro polycarbonate a wɔde akata so denneennen no ho?

Fa nneɛma a ɛyɛ mmerɛw a ɛnyɛ abrasive a wɔde tew nneɛma ho ne nneɛma a wɔde tew nneɛma ho a wɔagye atom sɛ ɛne polycarbonate ne ade a wɔde kata so a ɛyɛ den no hyia di dwuma. Kwati abrasive pads ne aggressive solvents a wonni ho adanse.

So Wallis betumi de nhwɛsode ahorow ama ansa na wɔayɛ no kɛse?

Aane. Wɔkamfo nhwɛsode nhwehwɛmu kyerɛ sɛ wɔmfa nhwɛ optical pefee, coating quality, scratch resistance, machining suban ne compatibility ne customer no padel court nhyehyɛe ansa na bulk production.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Fa thickness a wɔhwehwɛ, panel dimensions a wɔawie, dodow, tokuru nhyehyɛe, frame drawing, coating-side ahwehwɛde, abɔnten wim tebea, asɛnnibea gyinapɛn a ɛfata ne optical anaa structure ahwehwɛde biara ma.

Bisa 12mm Padel Court Polycarbonate sheet Nhwɛsode ahorow

Worehwehwɛ 12mm hard-coated polycarbonate krataa a wɔde ma padel asɛnnibea ? Wallis de UV -resistant anti-scratch PC panels, custom sizes ne project-based processing ma asɛnnibea adwumayɛfo, agumadi-beae adwumayɛfoɔ ne ahobanbɔ-glazing a ɛda adi pefee a wɔde ma.

Send wo panel drawing, thickness, dodow, tokuru nhyehyɛe, coating ahwehwɛde ne botae gua na woanya ade a ɛfata nyansahyɛ, nhwɛso ne factory quotation.