Polycarbonate Krataa a Wɔakata so Den | PC Krataa a Ɛko Tia Scratch

Hard Coated Polycarbonate Sheet a efi Wallis Plastic no yɛ plastic panel a ɛyɛ adwuma yiye a wɔayɛ ama nnwuma a ɛhwehwɛ sɛ ɛko tia nsɛe a ɛkorɔn, ɛyɛ nea ɛda adi bere tenten, na ahoɔden a ɛda nsow wɔ nkɛntɛnso a ɛbɔ ho . Ɛdenam ade a ɛyɛ den a ɛkɔ akyiri a wɔde kata polycarbonate nneɛma a ɛyɛ fɛ so so no, saa krataa yi ma ɔfasu no tumi kyɛ kɛse bere a ɛkɔ so kura ahoɔden a efi awosu mu ne sɛnea ɛyɛ mmerɛw a ɛwɔ PC nkrataa mu no mu.

Sɛ wɔde toto polycarbonate nkratafa a wɔtaa de di dwuma ho a, polycarbonate a wɔde akata so denneennen no ma ɛtra hɔ kyɛ, ɛtew ɔsɛe a ɛwɔ soro no so, na ɛma ɛyɛ fɛ yiye , na ɛma ɛyɛ nea eye ma mfiridwuma, adansi, akwantu, ne ahobammɔ ho dwumadie.

Kɛseɛ	1020 * 2040 1220 * 2440 na ɛwɔ hɔ
Nneɛma a ɛyɛ den	1-20mm na ɛwɔ hɔ
Nkyerɛmu	Na wear resistance coating a ɛwɔ su a ɛne Wear ,ɔhyew acid ne alkali solvent resistance ne ect.
Suban	1. Wear resistance 2. Scratch resistance 3. Ɔhyew,acid ne alkali a ɛko tia 4. Ahoɔden a ɛko tia nsakrae

Ade a Wɔde Sɔ Sɔhwɛ	Nnwinnade a Wɔde Sɔ Sɔhwɛ	Akwan a Wɔfa so Sɔ Sɔhwɛ/Tebea	Nsunsuansoɔ
VLT/nsɛm a wɔde mena	Nkrasɛm a wɔde sɔ nneɛma mu hwɛ	Sɔhwɛ tẽẽ	90% na ɛwɔ hɔ.
Mfutuma	Haze Mita a Wɔde Di Dwuma	ASTM D1001 na ɛwɔ hɔ	<0.5% na ɛwɔ hɔ.
Adhesion a ɛbata ho	Boiling tester a wɔde yɛ nneɛma	30mins wɔ Boiling nsuo mu	5B
Nneɛma a ɛyɛ den	Hardness Pencil Tester a Wɔde Hwɛ Nneɛma a Ɛyɛ Den	ASTM D3363 na ɛwɔ hɔ	B-HB
Hyɛ nea ɛko tia	Steel wool Wear ahoɔden a ɛko tia tester	1000g/cm2,stroke:3.3cm ahoɔhare:40 kyinhyia/simma 200 kyinhyia	No scratch biara nni hɔ
Nsuo ntumi nkɔ mu	Boiling tester a wɔde yɛ nneɛma	Nsuo a wɔde gu nsuo mu 24h	Nsakrae biara nni hɔ

Nneɛma Titiriw a Ɛwɔ Polycarbonate Nkratafa a Wɔakata So Den Mu

1. Scratch Resistance a ɛkyɛn so

Nneɛma a wɔde kata so a ɛyɛ den no ma ahobammɔ a emu yɛ den fi ɔfasu a ɛbɛbɔ ho, na ɛma krataa no fata ma ɔmanfo, mfiridwuma, ne aguadi mmeae a ɛtaa di nkitaho.

2. Optical Clarity a Ɛkorɔn

With light transmission up to 92% , polycarbonate nkratafa a wɔde akata so denneennen hwɛ hu sɛ wotumi hu no pefee, na ɛma ɛyɛ papa ma glazing, ahobammɔ kataso, ne display applications.

3. Ahoɔden a Ɛkorɔn a Ɛma Nkɛntɛnso

Polycarbonate yɛ abɔde mu ahoɔden a ɛko tia — ɛyɛ den sen ahwehwɛ mpɛn 200 — a ɛma ahobammɔ adwumayɛ a ɛkyɛn so wɔ tebea horow a emu yɛ den mpo mu.

4. UV Ahobammɔ a Wɔde Di Dwuma wɔ Abɔnten

UV-resistant coating a wobetumi apaw no siw yellowing, onyin, ne adwumayɛ a ɛsɛe, hwɛ hu sɛ ɛbɛgyina bere tenten wɔ abɔnten dwumadie mu.

5. Ɛyɛ Hare Nanso Ɛyɛ Den

Ɛmfa ho sɛ ɛyɛ den no, polycarbonate da so ara yɛ hare, na ɛma ɛyɛ mmerɛw sɛ wɔde besisi hɔ na ɛtew adesoa a ɛwɔ ɔdan no so no so.

6. Nnuru & Ɔhyew a Ɛko Tia

Nneɛma a wɔde kata so no gyina nnuru a wɔtaa de di dwuma, nnuru a wɔde hohoro nneɛma ho, ne ɔhyew a ɛkɔ soro ano, na ɛboa ma wɔde di dwuma wɔ mfiridwuma ne mfiridwuma mu.

Nneɛma a ɛwɔ Polycarbonate Nkratafa a Wɔakata so Den no mu

Polycarbonate Nkratafa a Wɔakata So a Ɛyɛ Den a Wɔde Di Dwuma

Kar Nnwumayɛbea

Kar adwumayɛkuw no de Hard Coated Polycarbonate Scratch Resistant Polycarbonate Sheets di dwuma kɛse esiane sɛ emu yɛ hare na ɛko tia nsunsuanso nti. Nneɛma ahorow a wɔde akata so denneennen no ma ɛko tia nsɛe kɛse, na ɛma ɛyɛ nea eye ma kar mfɛnsere, kanea a wɔde kata anim, ne emu nneɛma. Wɔn a ɛtra hɔ kyɛ no ma ɛtra hɔ kyɛ wɔ karka tebea a emu yɛ den mpo mu, na ɛma wotumi hu ade na ahobammɔ wom.

Ɛlektrɔnik Nneɛma a Wɔde Kyerɛkyerɛ

Wɔ ɛlɛtrɔnik mfiri te sɛ smartphone ne tablɛt mu no, Hard Coated Polycarbonate Scratch Resistant Polycarbonate Sheets yɛ nneɛma a wɔde kata so. Sɛ wɔde kata saa nkratafa yi so denneennen a, ɛma nneɛma a wɔde kyerɛ no mu da hɔ na ɛnsɛe, na ɛma osuahu a ɔde di dwuma no nya ne mfiri no a ɛtra hɔ kyɛ no yɛ kɛse.

Nneɛma a Wɔde Di Dwuma wɔ Adansi Ho

Adwumfo ne adwumfo ani gye polycarbonate nkratafa ho esiane sɛnea ɛyɛ mmerɛw na ɛda adi pefee nti. Hard Coated Polycarbonate Scratch Resistant Polycarbonate Sheet nya mfaso wɔ wim ahwehwɛ, ɔdan atifi, ne adan a wɔde asiesie nneɛma mu, na ɛma ɛyɛ fɛ na ɛma nneɛma a atwa yɛn ho ahyia no tumi gyina ano.

Hard Coated Polycarbonate Scratch Resistant Polycarbonate Sheets abɛyɛ nea ɛho hia wɔ nnwuma ahorow mu, na ɛde afrafra a ɛyɛ den, emu da hɔ, na ɛyɛ adwuma pii ma. Ntama a ɛyɛ den a wɔde kata so no hwɛ hu sɛ saa nkratafa yi gyina nneɛma a atwa yɛn ho ahyia a emu yɛ den ano, na ɛboa ma ɛtra hɔ kyɛ na wotumi de ho to so.

Dɛn Nti na Wopaw Wallis Plastic a Wɔde Polycarbonate a Wɔakata So Den?

• Advanced Coating Technology hwɛ hu sɛ adhesion a emu yɛ den na ɛtra hɔ kyɛ abrasion resistance

• Strict Quality Control a ɛwɔ optical, hardness, ne durability sɔhwɛ

• OEM & Custom Solutions ma thickness, kɛse, ne soro ayaresa

• Stable Supply ma Wholesale Nneɛma a Wɔkra

• Adwumayɛfoɔ Mfiridwuma Mmoa & After-Sales Service

Wallis Plastic de ano aduru a wotumi de ho to so, ɛkɔ so daa, na wotumi sesa ma wiase nyinaa adetɔfo wɔ mfiridwuma, adansi, ne aguadi mu.

Adwumayɛbea & Sɔhwɛ Lab :

Nea agye din wɔ adetɔfo a wɔwɔ wiase nyinaa mu

Company no da biara da dwumadi

Adetɔfo nsɛm a wɔka

❓ Nsɛm a Wɔtaa Bisa (FAQ) .

Q1: Dɛn ne polycarbonate a wɔde akata so denneennen?

A: Ɛyɛ polycarbonate krataa a ɛwɔ soro a ɛyɛ den a ɛma ɛyɛ den sɛ ɛbɛko atia nsensanee, akisikuru, ne nnuru, bere a ɛma wotumi hu no yiye.

Q2: So wobetumi ayɛ saa nkratafa yi thermoformed anaasɛ wɔabɔ no?

A: Yiw. Wɔayɛ yɛn ade a yɛde kata so no sɛnea ɛbɛyɛ a ɛbɛkɔ so agyina bere a yɛreyɛ thermoforming no. Yɛsrɛ sɛ wo ne yɛn nkasa na woanya akwankyerɛ a ɛfa bending ho.

Q3: So wɔfata sɛ wɔde di dwuma wɔ abɔnten?

A: Yiw. Sɛ yɛde UV ahobammɔ di dwuma a, yebetumi de yɛn nkratafa no adi dwuma wɔ abɔnten bɛboro mfe 10 a ɛnyɛ kɔkɔɔ kɛse anaasɛ ɛnyɛ nea ɛda adi pefee.

Q4: So metumi akra amanne akɛse ne ne kɛse?

A: Akyinnye biara nni ho. Yɛde cut-to-size ne CNC processing services ma sɛnea w’ahiade pɔtee te.

Q5: Dɛn ne dodow a wɔkra (MOQ) a ɛba fam koraa?

A: MOQ gu ahorow sɛnea ne kɛse ne ne kɛse te. Mesrɛ wo bisa quote na woanya nsɛm pii.