Thermoforming de qualité supérieure Clear rigide PET feuille rouleau | Wallis ka izini

Thermoforming Clear Rigide Laminated Die-Cutting PET sɛbɛnfura wulilen

Thermoforming clear rigid laminated die-cutting PET sheet roll ye PET pakew ye min bɛ ye, min bɛ mɛn, ani min bɛ se ka ladilan ka kɛɲɛ ni mɔgɔw sago ye, min dilannen don ni vacuum ye, ka die tigɛ, ka kɛsu foli, ka blister pakew, kartiw, ka sɛbɛnni kɛ, ka u kɔrɔta, ani ka fɛnw jira. Ni a jɛlen don kosɛbɛ, a ka gɛlɛn, a ka baarakɛcogo ɲuman, ani a bɛ kɛ ni furakɛli baarakɛcogo ye min bɛ se ka kɛ, a bɛ kɛ ka caya pake dilannikɛlaw ni plastiki sɛbɛnw tigɛlikɛlaw fɛ.

Wallis bɛ PET sɛbɛnfura wulilenw dilan izini na, minnu bɛ kɛ rollo cogo la, ni u janya, u bonya, u kulɛri, u sanfɛla furakɛcogo, u laminicogo, ani u baarakɛcogo kɛrɛnkɛrɛnnenw i n’a fɔ PET sɛbɛnfura min bɛ sisi kɛlɛ, UV kɛlɛli, ji tɛ don a la, sɔgɔsɔgɔninjɛ kɛlɛli, kɛnɛyako gɛlɛn, matte, frosted, conductive, cold-resistant, ani heat-resistant PET sheet.

Fɛn dilannenw ka ɲɛfɔli kunbaba

Fɛn dilannen tɔgɔ ani a kɛcogo

• Fɛn min bɛ dilan, o tɔgɔ: Clear Rigide Laminated Die-Cut PET Sheet Roll

• Marka: Wallis ye

• Fɛn min bɛ kɛ: PET poliyetilɛni tereftalati lamininen sɛbɛnfura 100% raw

• Format: Roll format, laminated, a bɛnnen don die tigɛcogo ni thermoforming ma

Specification ani Custom sugandiliw

• A janya: 0,15mm-3mm walima a bɛ kɛ ka kɛɲɛ ni a yɛrɛ sago ye

• A bonya: 0,3m-1,4m walima a bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Kulɛri: Kulɛriw minnu bɛ kɛ cogo jɛlen na walima minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Baarakɛcogo: Furakɛcogo min bɛ kɛ ni funteni ye, ka a kɛ ni vacuum ye, ka a kɔrɔta, ka sɛbɛnni kɛ, ka die tigɛ, ani ka a da

Nafa min bɛ dilan izini na

Shanghai Wallis Technology Co., Ltd. bɛ fɛn dilanni taabolo kɔlɔsi k’a ta fɛnɲɛnamafagalan sugandili la ka taa a bila extrusion, lamination, roll forming, quality inspection, ani export packaging. I n’a fɔ izini siratigɛ la fɛn dilannikɛla, Wallis bɛ jogoɲumanya sabatilen di, sɔngɔko min bɛ se ka ɲɔgɔn sɔrɔ, a bɛ se ka fɛn caman kɛ ka kɛɲɛ ni mɔgɔw sago ye, ani ka waati dafalen di OEM ni ODM pakew dilanni porozɛw ma.

Fɛɛrɛko ɲɛfɔli

Minɛ	100% materiel primaire vacuum forming PET materiel
Ɲɛ	Transparent walima customized
A ka bon kosɛbɛ	0,15-3mm walima ka kɛɲɛ ni mɔgɔw sago ye
Waleyali	Vacuum forming pakew, sɛbɛnni, bending, foli kɛsu, kartiw, blister pakew
Ɲɛjirali kɛrɛnkɛrɛnnen	Clear rigid, hard, anti-fog, anti-UV, anti-ji, anti-scratch, transparent high glossy, high temperature resistance, double-sided matte, frosted, conductive, cond resistance, heat resistance
Jayan	0,3-1,4m walima ka kɛɲɛ ni mɔgɔw sago ye
Misali Waati	Tile 1-3
Lasecogo fɛɛrɛw	Kɔgɔjida la kurunbokari, awiyɔn bolicogo, teliya la
Sarali waati	T/T, L/C, Tlebi jamanaw ka tɔnba, PayPal
Mass Production ka ɲɛmɔgɔya waati	Tile 3-15, ka kɛɲɛ ni komandi hakɛ ye
Dipilomu	ROHS, MSDS, TDS, SGS, ISO9001 ye baara kɛ ni nin ye
Paki kɛli	A bɛ pake kurukuruw ni plastiki palɛtiw kɔnɔ, PP finimugu ni PE filimu ani siri palɛti kan kurukuru kelen-kelen bɛɛ kama

Fɛn kolomaw ni nafa minnu bɛ sɔrɔ a la

PET sɛbɛn min ka nɔgɔn ani min bɛ mɛn

PET sɛbɛnfura lamininen bɛ balansi barikama di a gɛlɛya, a gɛlɛya ani a minɛcogo nɔgɔman na. A bɛnnen don thermoforming ni die-cutting baarakɛcogo gɛlɛnw ma, yɔrɔ minnu na a muɲuli ni a hakɛ sabatili nafa ka bon.

Kɛrɛnkɛrɛnnenya la, jɛlenya ni jɛlenya

Ɲɛkisɛ jɛlenba ani a sanfɛla yeelen ka bon, o b’a to PET rollo ka ɲi kosɛbɛ pake jɛlenw kama, pake sɛbɛnnenw, jiralikɛnɛw, blister pakew, ani feerekɛyɔrɔw foroko minnu bɛ fɛn dilannenw yecogo jɛlen de wajibiya.

Baarakɛcogo caman bɛ se ka kɛ ka ɲɛsin die tigɛcogo ni thermoforming ma

Nin PET roll in bɛ dɛmɛ don thermoforming, vacuum forming, bending, die cutting, folding, printing ani karti dilanni na. A bɛ se ka kɛ ka kɛɲɛ ni blister pakew ye, kɛsu folilenw, karti jɛlenw, sanubɔlanw, datugulanw ani foroko dilannenw.

Baarakɛcogo ɲuman sugandiliw

• Sugunɛ kɛlɛli, UV kɛlɛli, ji tɛ don a la, ani sɔgɔsɔgɔninjɛ kɛlɛli sugandiliw bɛ sɔrɔ.

• Funteni caman kunbɛnni, nɛnɛ kunbɛnni, matte, frosted, conductive, ani high-gloss finiw bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Lamini bɛ se ka barika, masiri, dugukolo lakanani, walima baarakɛcogo ɲɛ ka kɛɲɛ ni poroze ka ɲininiw ye.

Laminated Die-Cutting PET Sheet Roll ka baarakɛcogo

Foroko ni jiracogo ɲɛnabɔcogo

PET sɛbɛnfura jɛlen jɛlen min dilannen don ni lamini ye, o ka ɲi dumuni pakew ma, blister packs, foli kɛsu, jiralan jɛlenw, kartiw, ani feerekɛyɔrɔw foroko kɔnɔ yɔrɔ minnu na kɛnɛya ni jɔcogo dafalen ka kan ka kɛ.

Sɛbɛnni, bending ani Die-Cutting baarakɛcogo

PET sɛbɛnfura bɛnnen don pake sɛbɛnnenw ma, sɛbɛnw tigɛlenw, pakew yɔrɔw cogoyalenw, kartiw, taamasiyɛnw, ani fɛnw foroko minnu bɛ kɛ yɔrɔ minnu na, yɔrɔ minnu na dakun saniyalenw, cogoya caman, ani ɲɛnayeli jɛlen ka kan ka kɛ yɔrɔ minnu na.

Vacuum Forming ani Thermoforming (sɛnɛfɛnw sɛnɛcogo).

Rollo cogoya ka nɔgɔn walasa ka thermoforming (thermoforming) kɛ ka taa a fɛ ani ka vacuum forming (vacuum forming) dilanni kɛ. A bɛ se ka kɛ sanubɔlanw ye, dawolo, bɔgɔlanw, kurukuruw, fɛnw dontaw, ani pakew minɛnw ye izini suguya wɛrɛw kama.

Sigida sabatili ani sɔrɔko nafa

A bɛ se ka segin ka kɛ fɛn wɛrɛ ye ani a bɛ sigida lakana

PET ye fɛn ye min bɛ se ka segin ka kɛ fɛn wɛrɛ ye, min bɛ kɛ ka caya foroko kɔnɔ. PET sɛbɛnfura roll ɲuman sugandili bɛ dɛmɛ ka dɛmɛ don pakew labɛnni na minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye, ka sɔrɔ ka fanga ni kɛnɛya sabati min ka kan ka kɛ jago siratigɛ la.

Musow ka musaka kuntaalajan

PET sɛbɛnfura wulilenw minnu bɛ mɛn ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ dɛmɛ ka fɛnw tiɲɛni dɔgɔya, ka baarakɛcogo ɲɛ, ani ka u falencogo dɔgɔya. O bɛ se ka ROI ɲɛ ka ɲɛsin pakew dilanni iziniw ma, sɛbɛnnikɛlanw, thermoforming iziniw, ani OEM porozɛw.

Fabrik ka nafa tilennen

Izini sɔngɔko siratigɛ la, fɛn ɲɛfɔlenw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ani cɛmancɛ musakaw dɔgɔyali, o b’a to Wallis PET sɛbɛnfuraw bɛ bɛn fɛn dilannibaw ma ani pakew dilanni porozɛw ma minnu bɛ kɛ ka ɲɛ.

Mun na an bɛ Wallis Factory Direct Supply sugandi?

So kɔnɔ fɛn dilanni kɔlɔsili

Wallis bɛ resin extrusion, lamination, roll forming, surface treatment, quality inspection, ani packing ɲɛnabɔ so kɔnɔ. O bɛ dɛmɛ ka jogoɲumanya dafalen di, ka fɛn ɲɛfɔcogo sabatilenw di, ani ka fɛn dilanni jaabi teliya.

Seko ni dɔnkoba ani Custom Service

Wallis bɛ dɛmɛ don ladamucogo la, a bonya, a kulɛri, a sanfɛla furakɛli, a farali baarakɛtaw, a jɔcogo lamininenw, a sɛbɛn tigɛcogo, ani a foroko foroko OEM ni ODM wajibiyalenw kama.

Export ka pakew ɲɛnabɔli

Rollo janya, a bonya ani a pake kɛcogo bɛ se ka kɛ ka kɛɲɛ ni a cicogo ɲuman ye. Jagokɛlaw ka pakew dabɔra walasa ka PET sɛbɛnfura kurulenw lakana yɔrɔjan bolifɛnw tali waati.

Jogoɲumanya sabatili gɛlɛn

Wallis bɛ masinw, ɲɛnayeli, dugukolo, janya ani lamini sɛgɛsɛgɛliw kɛ walasa ka dɛmɛ don ka baara kɛcogo segin-segin kɛ pakew dilanni, sɛbɛnni, die tigɛcogo ani thermoforming kuntigiw ye.

Shipping Waati

• Kɔgɔji fɛ: tile 10-25

• Ni awiyɔn ye: tile 4-7

• Dugukolo kan express i n’a fɔ DHL, TNT, UPS, ani FedEx: tile 3-5

Ɲininkaliw

Ne bɛ se ka komandi kɛ a janya fitinin jumɛn na?

A janya fitinin bɛ se ka kɛ milimɛtɛrɛ 0,15 ye, ka kɛɲɛ ni a ɲɛfɔcogo laban ye, a laminicogo, ani a baarakɛcogo wajibiyalenw.

Yala ne bɛ se ka rollo bonya walima a kulɛri kɛ ka kɛɲɛ ni ne yɛrɛ sago ye wa?

Awɔ. A bonya dantigɛlen bɛ se ka se mɛtɛrɛ 1,4 ma, wa a bonya walima a kulɛri sugandilenw bɛ sɔrɔ ka kɛɲɛ ni aw ka pakew ni u dilanni wajibiyalenw ye.

Yala nin PET sɛbɛnfura kurulen in bɛnnen don dumuni foroko ma wa?

Awɔ. PET sɛbɛnw kurulenw bɛ se ka kɛ dumuniw foroko ye ni u ɲɛfɔra ka ɲɛ. Labatoli laban ka kan ka dafa ka da sugu laɲininen kan, dumuni ni ɲɔgɔn cɛ wajibiyalenw, ani baarakɛcogo sigicogo.

Lamini bɛ PET sɛbɛnfura wulicogo ɲɛ cogo di?

Lamini bɛ se ka barikalanw cogoyaw ɲɛ, masin fanga, yɔrɔ lakanani, masiricogo, walima baarakɛcogo ɲuman ka kɛɲɛ ni fɛn dilannenw jɔcogo sugandilen ye.

A dilanni waati min bɛ kɛ cogoya la, o ye mun ye?

A dilanni waati nɔrɔlen ye tile 3-15 ye, ka kɛɲɛ ni komandi hakɛ ye, ka kɛɲɛ ni mɔgɔw ka ladamuni wajibiyalenw ye, fɛnw jɔcogo, ani fɛn dilanni waatibolodacogo.

MOQ ye mun ye nin fura in na?

A ka c’a la, MOQ bɛ tɛmɛ kilo 500 kan nin PET sɛbɛnfura wulilen in na. MOQ bɛ se ka ɲɔgɔn ta ka kɛɲɛ ni a bonya, a bonya, a kulɛri, a sanfɛla furakɛli, ani a kɛcogo ye min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Aw ye kuma Wallis fɛ walasa ka Factory Direct PET Sheet Roll sɔrɔ

Shanghai Wallis Teknoloji Co., Ltd.
   Email: sales@wallisplastic.com
   Telefɔni: +86 135 8430 5752
   Site web: www.wallisplastic.com ye a ka baara kɛ