Dekɔnu LF / HF / UHF Nusi me kɔ PVC RFID Inlay prelam Agbalẽvi

Dɔwɔwɔ ƒe Ðoɖo LF , HF kple UHF Nusi me kɔ PVC RFID Inlay prelam Agbalẽvi

Wallis transparent PVC RFID inlay prelam sheets ŋu na contactless smart card wɔlawo siwo hiã antenna ƒe ɖoɖo siwo wowɔ ɖe ɖoɖo nu, chip ƒe ɖoɖo si dzi wokpɔna kple lamination ƒe dɔwɔwɔ si ŋu kakaɖedzi le. Wotrɔ asi le Dɔa ƒe ɖoɖo siwo li dometɔ aɖewoe nye LF 125kHz, HF 13.56MHz, NFC kple UHF 860–960MHz mɔ̃ɖaŋunuwo na mɔɖeɖegbalẽviwo, dzesidegbalẽviwo, hamevinyenyegbalẽviwo, amedzrodzeƒegbalẽviwo, nunɔamesiwo ƒe gbalẽviwo kple RFID dɔ bubuwo.

Prelam agbalẽvi ɖesiaɖe ƒoa RFID chip kple antenna si wotia la nu ƒu ɖe PVC ƒuƒoƒo siwo me kɔ alo esiwo me kɔ afã kple afã me hafi woatrɔ kaɖi mamlɛtɔ. Woate ŋu atrɔ asi le ɖoɖo, agbalẽ ƒe lolome, eƒe titrime, antenna ƒe nɔnɔme, chip ƒe nɔƒe kple kaɖi ƒe gbeɖiɖi ŋu ƒo xlã nuƒlela ƒe punching dɔwɔnu, agbalẽtata ƒe nutata, laminator kple nuxlẽla ƒe ɖoɖo.

LF , HF kple UHF nye radio mɔ̃ɖaŋununya vovovowo tsɔ wu be woanye adzɔnu ɖeka ƒe tɔtrɔ siwo woate ŋu atrɔ. Be woakpɔ nyayɔyɔ si ŋu kakaɖedzi le la, ele be nuƒlelawo nade dzesi ɣeyiɣi si hiã, ɖoɖowɔɖi, chip ƒe kpɔɖeŋu, nuxlẽla ƒe kpɔɖeŋu, taɖodzinu ƒe nuxexlẽ ƒe didime kple kaɖi tutu si wowu enu hafi woawɔ kpɔɖeŋu.

Mɔ̃ɖaŋununya Ŋuti Nyatakakawo

Nukae Nye RFID Inlay prelam Agbalẽvi si me kɔ?

RFID prelam nye titina ƒuƒoƒo si wɔa dɔ si wozãna tsɔ wɔa plastic kaɖi si me kadodo mele o. Wotu chip, antenna kple bonding structure la ɖe plastic ƒuƒoƒo dome, si wɔnɛ be wowɔa agbalẽ si li ke si woate ŋu atsɔ aƒo ƒu kple agbalẽ siwo wota kple ametakpɔnu Overlay film s hafi woaƒoe mamlɛtɔ.

Kpekpeɖeŋugbalẽvi ƒe Dɔwɔɖoɖo si Bɔ

• Takpɔnu si le etame Overlay film alo ƒuƒoƒo si woate ŋu ata

• PVC prelam ƒuƒoƒo si me kɔ

• RFID chip kple antenna si sɔ kplii

• Lower PVC layer kple tiatiawɔblɔɖe ƒe agbalẽ si wota

• Trɔ yi megbe Overlay film alo dɔwɔwɔ ƒe kaɖi ƒe ƒuƒoƒo

Transparent PVC ɖea mɔ na antenna kple ememe xɔtutu be wòazu nukpɔkpɔ kaɖi ƒe nɔnɔme ƒe akpa aɖe. Esi wònye be antenna la gakpɔtɔ dzena ta la, alesi woawɔe wòasɔ ɖe wo nɔewo nu, alesi wòalé nu ɖe ​​nu ŋui, eƒe anyigba dzi dzadzɛnyenye kple chip ƒe nɔƒe le vevie ŋutɔ na kaɖi siwo me kɔ nyuie wu.

Tia LF , HF alo UHF Mɔ̃ɖaŋununya si sɔ

Ele be woatu frequency tiatia ɖe nuxlẽla ƒe xɔtuɖoɖo kple dɔwɔwɔ ƒe ɖoɖowɔɖi dzi. Kaɖi si wowɔ na LF mɔɖeɖe dzikpɔkpɔ mawɔ dɔ le eɖokui si kple HF / NFC nuxlẽla o, eye UHF kplɔla ƒe kaɖi bia antenna kple dodokpɔ ƒe nɔnɔme si to vovo tso didiƒe kpui ƒe teteɖeanyi kaɖi gbɔ.

Custom Layout Engineering na Kpekpeɖeŋugbalẽviwo wɔwɔ

Tsɔ Nuƒlela ƒe Punching kple Printing ƒe Ðoɖowɔɖi sɔ kple wo nɔewo

Ele be inlay matrix la nawɔ ɖeka kple asisi la ƒe nutata ƒe sedede, ŋkɔ ŋɔŋlɔ ƒe dzesiwo, punching die kple card orientation. Woate ŋu ana ɖoɖo siwo wowɔna ɖaa abe 3×8, 3×7 kple 4×5 ene, gake ɖoɖo siwo wowɔ ɖe ɖoɖo nu ya bia be woawɔ didime ƒe nɔnɔmetata alo kaɖi ƒe nɔnɔme ƒe faɛl si dzi woda asi ɖo.

Kpɔ Chip kple Antenna ƒe Nɔnɔme Dzi

Ele be chip ƒe nɔnɔme naƒo asa na embossing zones, magnetic stripes, signature panels, contact modules, punch lines kple nu vevi siwo wota. Le aɖaŋu siwo me kɔ gome la, ele be woato antenna ƒe mɔ si wokpɔna hã me atsɔ asɔ kple nutata la.

Aɖaŋu na Kpekpeɖeŋugbalẽvi si Wowu Nu ƒe Titrime

prelam ƒe titrime nye kaɖi ƒe xɔtutu si wowu enu ƒe akpa ɖeka ko. Ele be woatsɔ agbalẽ siwo wota, Overlay film s, adhesive layers, chip cavities kple optional security layers ade eme ne wole akɔnta bum laminated ƒe titrime mamlɛtɔ.

Viɖe Vevi Siwo Le Adzɔnuwo Wɔwɔ Me

Precise Inlay Teƒeɖoɖo

Antenna kple chip ɖoɖo si dzi wokpɔna kpena ɖe asisi la ŋu be wòalé ŋkɔ ŋɔŋlɔ me ɖe asi to agbalẽtata, lamination kple punching me. Ele be woaɖe didime ƒe nudidiwo gɔme le ɖoɖowɔɖi ƒe nɔnɔmetata si dzi woda asi ɖo dzi eye woaɖo kpe edzi le kpɔɖeŋuwɔwɔ me.

Kpekpeɖeŋugbalẽvi ƒe Aɖaŋuwɔwɔ ƒe Ŋutete

Prelam si me kɔ alo esi me kɔ afã kple afã na be woate ŋu awɔ agbalẽvi siwo woate ŋu akpɔ kple mɔ̃ɖaŋununya. Klɔ PVC ƒuƒoƒowo, adhesive ƒe dzedzeme si dzi wokpɔna kple antenna ƒe mɔfiame si mewɔa tɔtrɔ o kpena ɖe ame ŋu be woawɔ kaɖi si wowu enu si nye dɔnyala wu.

Lamination kple Trɔtrɔ ƒe Ðekawɔwɔ

Woateŋu atsɔ prelam la awɔ ɖeka kple PVC tata ƒe agbalẽvi siwo sɔ kple Overlay film s. Ele be woaɖo kpe lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi kple fafamɔnu dzi to dodokpɔwo me elabena ɖoɖo nyuitɔwo nɔ te ɖe kaɖi ƒe wɔwɔme kple dɔwɔnuwo dzi.

Multi-Frequency kple Hybrid Dɔwɔɖoɖowo ƒe Kpekpeɖeŋu

Woate ŋu awɔ ɖoɖo siwo me wowɔa nu vovovowo le zi ɖeka kple esiwo wotia. Hybrid cards hiã mɔ̃ɖaŋununya bubuwo elabena antenna eve ateŋu awɔ dɔ, aʋli ho ɖe card ƒe teƒe ŋu alo akpɔ ŋusẽ ɖe nuxexlẽ ƒe dɔwɔwɔ dzi le lamination megbe.

OEM Nusiwo Wowɔ Ŋuti Nyatakakawo

Nuƒlelawo ate ŋu agblɔ agbalẽwo ƒe ŋkɔwo, kaɖi ƒe nɔƒe ƒe xexlẽdzesiwo, ameyibɔwo ƒe ŋkɔ ŋɔŋlɔ ƒe dzesiwo, nubablɛwo ƒe agbɔsɔsɔme kple pallet ƒe dzesiwo. Ele be woaɖe encoding alo UID data handling gɔme ɖe vovo, si me data ƒe nɔnɔme, dedienɔnɔ ƒe nudidiwo kple agbanɔamedzi le safuiwo dzi hã le.

Agbalẽtata, Lamination kple Card Trɔtrɔ Mɔfiame

Ele Be Woaɖo Ðe Agbalẽtata ƒe Anyigba dzi

Woɖoe be prelam gbalẽvi aɖewo nanɔ kaɖia me eye woatsɔ PVC agbalẽvi siwo wota ɖe vovo atsyɔ wo dzi. Ne wodo anyigbadzidɔwɔwɔ kple nuŋlɔtsi ƒe ɖoɖo si wotia la kpɔ be elé ɖe nu ŋu ko hafi wòle be woagblɔ direct offset, UV alo digital printing.

Ele be Woado RF ƒe Dɔwɔwɔ kpɔ le Lamination megbe

Antenna ƒe ɖiɖi kple nuxexlẽ ƒe didime ateŋu atrɔ ne wotsɔ prelam la ƒo ƒu kple Overlay film s, ga inks, foil, magnetic materials alo electronic components siwo te ɖe eŋu vɔ. Ele be dodokpɔ si woatsɔ ada asi ɖe edzi nazã kaɖi mamlɛtɔ ƒe xɔtutu kple nuƒlela ƒe nuwɔwɔ xlẽla.

Ele Be Woaɖo Kpe Punching Ŋkɔ Ŋlɔɖi Ŋu

Hafi woawɔe le agbɔsɔsɔ gã me la, ele be asisi la naɖo kpe nutatawo ƒe ŋkɔ ŋɔŋlɔ, kaɖi ƒe gbeɖiɖi, antenna ƒe ʋuʋu kple chip teƒe le punching dɔwɔnu ŋutɔŋutɔ dzi. Dimension-nutata ɖeɖe mate ŋu axɔ ɖe ewɔwɔ dodokpɔ blibo teƒe o.

Dzɔdzɔmeŋutete Dzi Kpɔkpɔ Kple Kpɔɖeŋuwo Dzi Dada

Le B2B sededewo gome la, ele be kpɔɖeŋu si dzi woda asi ɖo la nazu nusi dzi woanɔ te ɖo awɔ ɖoɖo, dzedzeme, eƒe titrime kple RF ƒe dɔwɔwɔ. Ele be woalɔ̃ ɖe dzidzenu siwo dzi woato alé ŋku ɖe nu ŋu dzi hafi awɔe, vevietɔ le antenna ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu kple xɔtuɖoɖo siwo me wozãa ɣeyiɣi geɖe le gome.

Sika Kpɔɖeŋu Dɔwɔna si Wokafu

1. Kpɔ frequency, protocol, chip, reader kple encoding ƒe nudidiwo dzi.

2. Da asi ɖe agbalẽa ƒe nɔnɔmetata, kaɖi ƒe matriki, antenna ƒe mɔ kple chip ƒe nɔnɔmetatawo dzi.

3. Wɔ kpɔɖeŋu prelam agbalẽwo eye nàɖo kpe elektrikŋusẽ ƒe dɔwɔwɔ dzi.

4. Laminate kple nuƒlela ƒe kaɖi ƒe wɔwɔme bliboa.

5. Punch agbalẽvi siwo nèwu enu eye nàdo wo kpɔ le nuxlẽla ƒe ɖoɖo si nèdi be yeawɔ la dzi.

6. Da asi ɖe Sika Kpɔɖeŋu kple batch lɔlɔ̃ ƒe dzidzenu siwo woŋlɔ dzi.

Dɔbiagbalẽviwo

Mɔnukpɔkpɔwo Dzi Kpɔkpɔ Kple Vavalawo ƒe Kpekpeɖeŋugbalẽviwo

Woateŋu aɖo LF alo HF prelam gbalẽviwo na dɔwɔlawo ƒe mɔɖeɖe, sukuxɔ me dzesidede, vava kple domenyinu tete ɖe wo nɔewo ŋu ƒe ɖoɖowo. Ele be woaɖo kpe nuxlẽla ƒe ɖoɖowɔɖi si woda ɖe eme dzi hafi woatia chip.

NFC kple Hamea me tɔwo ƒe Kpekpeɖeŋugbalẽviwo

HF / NFC inlays ateŋu ado alɔ dijitaal kadodo, hameviwo ƒe dzesidede kple smart marketing application tiatia ne woɖe chip memory, NDEF ƒe nudidi kple smartphone alo nuxlẽla ƒe ɖekawɔwɔ gɔme.

Amedzrodzeƒe Kple Amedzroxɔgbalẽviwo

Ele be amedzrodzeƒe ƒe kaɖiwo nasɔ kple gaxɔgbalẽvi si li fifia ƒe ɣeyiɣi ƒe didime, chip, ŋkuɖodzinu ƒe wɔwɔme kple dedienɔnɔ ƒe ɖoɖo. HF alo NFC chip si wozãna le mɔ gbadza nu mewɔa ɖeka kple amedzrodzeƒe ƒe gaƒoɖokui ƒe mɔnu ɖesiaɖe le eɖokui si o.

UHF Dzesidegbalẽviwo Kple Mɔfiamegbalẽviwo

UHF woateŋu atrɔ asi le kaɖi ƒe nutrenuwo ŋu na dzesidede didi, ʋu ƒe yiyi kple nunɔamesiwo ƒe dɔwɔwɔ. Dɔwɔwɔ nɔ te ɖe nutome ƒe frequency band, nuxlẽla ƒe ŋusẽ, antenna ƒe mɔfiame kple nusiwo ƒo xlã kaɖi si wowɔ vɔ la dzi.

Nukatae Nàtia Wallis na RFID prelam Agbalẽvi Siwo Trɔ asi le?

• Ðoɖowɔwɔ ƒe kpekpeɖeŋu si wowɔ ɖe ɖoɖo nu: woateŋu alé ŋku ɖe kaɖi ƒe matriki, antenna ƒe mɔ, chip ƒe nɔƒe kple agbalẽ ƒe lolome ŋu na OEM dɔwo.

• RFID mɔ̃ɖaŋununya geɖewo ŋu: LF , HF / NFC , UHF kple hybrid ɖoɖo tiatia aɖewo. LF HF NFC UHF

• Kaɖi ƒe nuzazã si me kɔ ƒe ŋutete: PVC xɔtutu siwo me kɔ kple esiwo me kɔ afã kple afã li na mɔ̃ɖaŋununya ƒe nɔnɔmetata siwo wokpɔna.

• Kaɖi ƒe nuzazãwo ƒe ƒoƒo ɖekae: woateŋu awɔ ɖoɖo ɖe PVC agbalẽvi siwo sɔ, Overlay film s kple kaɖi ƒe tɔtrɔ ƒe kpekpeɖeŋu si wowu enu ŋu.

• Mɔɖeɖe si wotu ɖe kpɔɖeŋu dzi: woate ŋu ada mɔ̃ɖaŋununya ƒe kpɔɖeŋuwo kpɔ hena lamination, punching kple nuxlẽla ƒe ɖekawɔwɔ hafi woawɔ wo le agbɔsɔsɔ gã me.

• Export packaging: sheet protection, carton packing, labeling kple pallet tiatia ate ŋu agblɔ na dukɔwo dome nudɔdɔwo.

Tiatia Siwo Nàwɔ Trɔ Asi Le Nu Ŋu

• LF , HF / NFC , UHF alo woda asi ɖe hybrid frequency structure dzi

• Chip model tiatia na nuƒlela ƒe protocol kple nuxlẽla

• Akɔbli ka, ka si wotsɔ de eme alo etched antenna ƒe nɔnɔme

• 3×8, 3×7, 4×5 alo agbalẽvi ƒe ɖoɖo si wowɔ ɖe ɖoɖo nu bliboe

• Trɔ asi le agbalẽa ƒe didime, titrime kple kaɖi ƒe kɔkɔme

• Dzedzeme si me kɔ, si me kɔ afã alo frosted si me kɔ

• Ŋkɔ ŋɔŋlɔ ƒe dzesiwo, kaɖi-teƒe ƒe xexlẽdzesiwo kple OEM dzesiwo

• Sheet, carton kple export pallet ƒe bablawo

Nubablɛwo Kple Xexeame Katã ƒe Nudɔdɔwo

Ele be woakpɔ RFID prelam agbalẽwo ta tso woƒe bɔbɔ, ɖiƒoƒo, tsidzadza kple mɔ̃wo ƒe nyaƒoɖeamenu me le wo tsɔtsɔ yi teƒe bubuwo me. Woate ŋu aɖo kpe packing agbɔsɔsɔme, separators, anti-static nudidiwo, carton labels kple pallet ɖoɖo dzi le agbalẽa ƒe lolome kple nuƒlela ƒe xɔxɔ ƒe ɖoɖo nu.

Nyatakaka Siwo Hiã Na B2B Quotation Kabakaba

Nya Siwo Wobia Enuenu

Nukae wozãna na RFID inlay prelam sheet?

Enye titinati si le dɔ wɔm le plastik-kaɖi si me kadodo mele o ƒe akpa si le dɔ wɔm. Chip kple antenna le agbalẽa me eye wotsɔa agbalẽtata ƒe agbalẽviwo kple Overlay film s ƒoa xlãe hafi ƒoa wo ɖe agbalẽvi siwo wowɔ vɔ me.

RFID frequency kawoe woateŋu ana?

Dɔa ƒe tiatia aɖewoe nye LF 125kHz, HF 13.56MHz, NFC kple UHF 860–960MHz. Woate ŋu ada dual-frequency alo hybrid structures tiatia aɖewo hã kpɔ.

Ðe woate ŋu atsɔ LF , HF kple UHF chips aɖo wo nɔewo teƒea?

Ao, wozãa frequency, protocol, antenna kple reader system vovovowo. Ele be woatia chip kple antenna la na xɔtuɖoɖo si woɖo be woawɔ.

Ðe woate ŋu atrɔ asi le agbalẽa ƒe ɖoɖo kple chip ƒe nɔƒe ŋua?

Ɛ̃. Woateŋu awɔ ɖoɖo, agbalẽ ƒe lolome, kaɖi ƒe kɔkɔme, antenna ƒe nɔnɔme kple chip ƒe nɔnɔmetatawo tso nɔnɔmetata si ƒe didime le kple ewɔwɔ ƒe kpɔɖeŋu si dzi woda asi ɖo me.

Ðe woate ŋu ata prelam si me kɔ la tẽa?

Enɔ te ɖe anyigba ƒe lolome si wotia kple nuŋlɔtsi ƒe ɖoɖo si wotia dzi. Kpekpeɖeŋugbalẽvi geɖewo zãa PVC agbalẽvi siwo wota ɖe vovo ɖe prelam la dzi. Ele be woatsɔ ink-adhesion dodokpɔ aɖo kpe agbalẽtata tẽ dzi.

Titrime kae li?

Fifia ƒe adzɔnuwo ŋuti nyatakaka yɔ 0.30–0.76mm. Prelam ƒe titrime nyuitɔ nɔ te ɖe chip cavity, antenna, Overlay film s kple card ƒe titrime si wowu enu si hiã dzi.

Àte ŋu awɔ dual-frequency RFID prelam?

Woateŋu ato LF + HF , LF + UHF alo HF + UHF xɔtuɖoɖo siwo wotia la me. Ate ŋu adzɔ nɔ te ɖe antenna ƒe kadodo, kaɖi ƒe teƒe si li, chip ƒe nɔƒewo kple taɖodzinu kaɖi ƒe titrime dzi.

Aleke woɖoa kpe RF ƒe dɔwɔwɔ dzii?

Dodokpɔ ateŋu anye antenna ƒe yiyi, chip ƒe ŋuɖoɖo kple dɔ tɔxɛ ƒe nuxlẽla ƒe dodokpɔ. Ele be mɔɖeɖe mamlɛtɔ hã nado punched cards kpɔ le lamination megbe kple nuƒlela ƒe nuxlẽmɔ̃.

Ðe woɖo kpe UHF nuxexlẽ ƒe didimewo dzia?

Nuxexlẽ ƒe didime nɔ te ɖe chip ƒe seselelãme, antenna ƒe wɔwɔme, nutome ƒe haƒoƒo, nuxlẽla ƒe ŋusẽ, mɔfiame kple nusiwo ƒo xlãe dzi. Ele be woazã kaɖi mamlɛtɔ ƒe wɔwɔme atsɔ aɖo kpe taɖodzinu ƒe didime aɖe dzi.

Ðe woate ŋu azã inlay siawo atsɔ awɔ amedzrodzeƒea ƒe safuigbalẽviwoa?

Ẽ, ne chip kple protocol sɔ kple amedzrodzeƒea ƒe gaƒoɖokui ƒe ɖoɖoa. Ele be woatsɔ gaƒoɖokui ƒe dzesi, encoder kple kaɖi ƒe nɔnɔme si li fifia ana hena woƒe ɖekawɔwɔ me toto.

Ðe woate ŋu awɔ encode na chips hafi aɖo wo ɖe woa?

Woateŋu adzro encoding me le chip kple project la nu. Ele be asisi la naɖe nyatakakawo ƒe nɔnɔme, safuiwo, UID zazã, ʋuʋu ƒe nɔnɔme kple dedienɔnɔ ƒe agbanɔamedziwo gɔme.

Nukae wòle be woado kpɔ hafi abia nu gbogbo aɖe?

Ele be nuƒlelawo nado agbalẽvi ƒe didime, agbalẽtata alo Overlay film ƒe sɔsɔ, lamination, punching registration, card flatness kple RF ƒe dɔwɔwɔ kpɔ le nuxlẽla si woɖo be woawɔ la dzi. Ele be Sika Kpɔɖeŋu si dzi woda asi ɖo la nazu batch reference.