|
PVC kple PC ƒe agbalẽ ɣi siwo le dɔwɔƒe tẽ hena kaɖi kple asitsatsa ƒe agbalẽtata. Trɔ asi le titrime, lolome, anyigba kple lãɖeɖe na offset, UV kple screen tata, lamination kple OEM B2B wɔwɔ.
core sheet ƒe agbalẽ
WALLIS ƒe ŋkɔ
| Agbɔsɔsɔ: | |
|---|---|
| Amadede: | |
| Titrime: | |
| Dɔwɔwɔ: | |
| Agbɔsɔsɔ: | |
Wallis naa PVC kple PC-gbalẽvi ɣi siwo wowɔ ɖe ɖoɖo nu hena agbalẽtata na kaɖiwɔlawo, asitsagbalẽtamɔ̃wo, dedienɔnɔ-nuŋlɔɖiwo wɔlawo, tɔtrɔlawo kple plastik-agbalẽwo mamalawo. Woate ŋu atsɔ titrime siwo li, agbalẽwo ƒe lolome, anyigba ƒe nuwuwu kple agbalẽtata ƒe atikewɔwɔwo asɔ kple offset tata, UV digital tata, seda-screen tata kple laminated card wɔwɔ.
Substrate ɣia naa megbenya si mewɔa tɔtrɔ o na nɔnɔmetatawo, nuŋɔŋlɔwo, barcodewo, QR codewo kple dedienɔnɔ ƒe nɔnɔmewo. Zi geɖe la, wotiaa PVC na kaɖi kple agbalẽtatadɔ siwo me gazazã mele o, siwo ƒe lolome lolo, gake wolɔ̃a polycarbonate ne ehiã be woatu ŋusẽ si lolo wu le eƒe ŋusẽkpɔɖeamedzi, dzoxɔxɔ ƒe tsitretsitsi, didime ƒe liƒo alo kaɖi tutu si le dedie wu.
Be kakaɖedzi le agbɔsɔsɔ gã wɔwɔ ŋu la, ele be nuƒlelawo naɖo kpe nusi wotsɔ wɔe ƒe hatsotso, eƒe titrime, agbalẽa ƒe didime, ɣie, eƒe anyigba ƒe nɔnɔme, agbalẽtata ƒe ɖoɖo, nuŋlɔtsi ƒomevi, lamination ƒe wɔwɔme kple eŋudɔwɔwɔ mamlɛtɔ dzi hafi abia. Wallis ateŋu ana kpɔɖeŋuwo hena tata, lamination, lãɖeɖe kple nusiwo wowɔ vɔ ƒe dodokpɔ.
| Parameter | si Li ƒe Nyatakaka |
|---|---|
| Nu | White PVC / white polycarbonate (PC) / PETG li na kaɖidɔ siwo do ƒome kplii |
| Eƒe titrime | 0.10–0.80 mm dzidzenu dɔa ƒe didime; custom thickness le nusi wotsɔ wɔe kple dɔwɔwɔ ƒe kpeɖodzi te |
| Agbalẽvi ƒe Agbɔsɔsɔme Siwo Woɖo Ðe Ðoɖo Nu | A4 / A3 / 295 × 485 mm / 500 × 600 mm / custom lãɖeɖe ƒe lolome |
| Amadede | Ɣi; woate ŋu aƒo nu tso taɖodzinu ɣie alo amadede ƒe dzidzenu ŋu na OEM ƒe nudɔdɔwo |
| Ŋkume | Matte / gloss / agbalẽtata-treated surface, tiatia le ink kple agbalẽtata dɔwɔnuwo nu |
| Agbalẽtata ƒe Ðekawɔwɔ | Offset / UV dijitaal / seda ƒe screen; ɖoɖo bubuwo hiã be woaɖo kpe kpɔɖeŋuwo dzi |
| Dɔwɔwɔ le Downstream | Lamination / ku lãɖeɖe / punching / dzodzoe stamping / ame ŋutɔ ƒe nɔnɔme / kaɖi kpekpe |
| Dɔbiagbalẽvi Gbãtɔwo | ID, IC, SIM, gadzraɖoƒe, mɔɖeɖe, hamevinyenye, nunana kple smart cards; wota panels, labels kple dzesiwo ƒe dɔ tiatia aɖewo |
| Trɔ asi le eŋu | Titrime, didime, ɣie, anyigba, lãɖeɖe, babla kple ame ŋutɔ ƒe dzeside |
| Kpɔɖeŋu ƒe Dzesidede | Wokafu agbalẽtata, nuŋlɔtsi ƒe nuléle, lamination, gbadzaƒe, lãɖeɖe kple dodokpɔ si wowɔ vɔ le kaɖi dzi hafi woada asi ɖe edzi le agbɔsɔsɔ gã me |
De dzesii: Ele be woagblɔ mɔ̃ɖaŋununya ƒe asixɔxɔ mamlɛawo, mɔɖeɖe ɖe nu ŋu, anyigbadzidɔwɔwɔ kple dɔwɔwɔ ƒe nɔnɔmewo le nyayɔyɔ si dzi woda asi ɖo, mɔ̃ɖaŋu ŋuti nyatakaka gbalẽvi alo kpɔɖeŋu ƒe nɔnɔmetata si wode asi na nu ƒe hatsotso ɖesiaɖe me.
PVC kple PC metrɔna le agbalẽtata alo kaɖidɔ ɖesiaɖe me o. Nusiwo sɔ nɔ te ɖe kaɖi ƒe agbenɔƒe si hiã, agbalẽtata ƒe ɖoɖo, lamination ƒe dzoxɔxɔ, mɔ̃ ƒe dɔwɔwɔ, dedienɔnɔ ƒe seƒe kple taɖodzinu ƒe gazazã dzi.
| Tiatia Nu | White PVC Agbalẽvi | White PC Agbalẽvi |
|---|---|---|
| Ðoƒe Siwo Woɖona Ðe Ðokuisi Siwo Wozãna | Nusiwo mexɔ asi o hena volume card kple asitsatsa ƒe agbalẽtata | Nu nyuitɔ kekeake na dɔwɔwɔ siwo nɔa anyi didina eye wotsia dzi ɖe dedienɔnɔ ŋu |
| Mɔ̃ɖaŋununya ƒe Dɔwɔwɔ | Sesẽme si da sɔ kple asitɔtrɔ le nɔnɔmewo ŋu na kaɖi ƒe xɔtuɖoɖo siwo bɔ | Ŋusẽ si kɔ wu le ŋusẽkpɔɖeamedzi kple didime ƒe liƒo |
| Dzoxɔxɔ ƒe Dɔwɔwɔ | Esɔ na PVC kaɖi lamination dɔwɔwɔ ƒe ɖoɖo siwo woɖo anyi | Wotiae le afisiwo wòhiã be woawɔ dɔ le alo subɔsubɔ ƒe dzoxɔxɔ ƒe tsitretsitsi si lolo wu |
| Agbalẽtata | Offset, UV kple screen tata kple anyigba ƒe dzesi nyuitɔ | Agbalẽtata bia be woawɔ PC film ƒe dzeside, eƒe anyigba kple ink ƒe ɖoɖo si sɔ |
| Nusiwo Wozãna Zi geɖe | Hamevinyenye, nunana, mɔɖeɖe, amedzrodzeƒe, nuteƒewɔwɔ, SIM kple ID-gbalẽvi siwo wozãna le mɔ gbadza nu | Dziɖuɖu ƒe ID, ʋukugbalẽvi, agbalẽ si le dedie, dɔwɔƒewo ƒe ŋkɔ kple akpa siwo wota siwo nɔa anyi didina ƒe dɔwo |
| Nuƒlela ƒe Nu vevitɔ | Ganyawo ƒe tɔtrɔ kple gbeɖiɖi gbogbowo ƒe ɖekawɔwɔ | Subɔsubɔ ƒe agbenɔƒe didi, ŋusẽkpɔɖeamedzi ƒe tsitretsitsi kple dedienɔnɔ ƒe ɖekawɔwɔ |
Offset card tata bia be woakpɔ ŋusẽ ɖe anyigba dzi, wòanɔ blɔ eye wòalé nuŋlɔtsi. Ele be agbalẽvi si wotia la nanɔ gbadzaa le nuɖuɖu nana me eye wòalé nɔnɔmetata siwo wota ɖe te to etutu, eƒoƒo ɖe wo nɔewo dzi kple wo tsɔtsɔ ƒo ƒui me. Ele be nuƒlelawo nana ink system, press type kple lamination nɔnɔmewo ne wole kpɔɖeŋu biam.
UV tata ate ŋu awɔ nɔnɔmetata ɖaɖɛwo tẽ le aŋe sesẽ dzi, gake alesi woalé ɖe wo nɔewo ŋu nɔ te ɖe agbalẽa ƒe anyime, nuŋlɔtsi ƒe wɔwɔme, ŋusẽ si woatsɔ awɔ dɔe kple alesi woawɔe do ŋgɔ dzi. Ele be woawu cross-hatch alo tape adhesion dodokpɔ nu le agbalẽtata vɔ megbe eye woagawu enu le lamination alo finishing ƒe ɖoɖo ɖesiaɖe megbe.
Wozãa screen printing enuenu na amadede siwo me mekɔ o, ga ƒe ŋusẽkpɔɖeamedzi, dedienɔnɔ ƒe ƒuƒoƒo kple nɔnɔmetata tɔxɛwo. Ele be woawɔ ɖeka kple mesh, ink ƒe titrime, ƒuƒu ƒe nɔnɔmewo kple sheet ƒe anyigba be woaƒo asa na xexe, gbagbã alo alé ɖe wo ŋu gbɔdzɔgbɔdzɔ.
Mele be woabu PVC alo PC-gbalẽvi si woate ŋu ata kple offset si wozãna ɖaa le eɖokui si abe agbalẽ si woate ŋu ata kple inkjet ene o. Zi geɖe la, inkjet ɖoɖowo hiãa nusi wotsɔ blaa nu tɔxɛ aɖe si xɔa nu, eye dzoxɔxɔ ƒe asitɔtrɔ ƒe dɔwɔwɔ nɔ te ɖe lãgbalẽgolo, agbalẽtamɔ̃ ƒe dzoxɔxɔ kple eƒe anyigba ƒe nuwuwu dzi. Bia dzesi si sɔ na dɔwɔnu ŋutɔŋutɔa.
Agbalẽtata me tsonu siwo li ke dzea egɔme kple nu xoxo siwo dzi wokpɔna, extrusion alo calendaring, titrime dzi kpɔkpɔ, anyigba dzi dɔwɔwɔ, amadede me dzodzro, agbalẽwo ɖeɖe kple ametakpɔnu bablawo. Le B2B ƒe sedede siwo wogbugbɔ wɔ gome la, ele be nɔnɔme si dzi woda asi ɖo la naɖe nusi wotsɔ wɔe, eƒe titrime, eƒe didime, eƒe anyigba, amadede ƒe nufiame kple lɔlɔ̃ ɖe edzi ƒe mɔnu la me.
Gɔmeɖoanyi ɣi si li ke kpena ɖe amadede ƒe gbugbɔgadzɔ si woate ŋu agblɔ ɖi ŋu le nutatawo, nuŋɔŋlɔwo, fotowo kple dedienɔnɔ ƒe nɔnɔmetatawo katã me. Le dɔ siwo me amadede le vevie gome la, ele be nuƒlelawo naɖe kpɔɖeŋu ŋutɔŋutɔ si dzi woda asi ɖo alo amadede ƒe taɖodzinu si woate ŋu adzidze la gɔme tsɔ wu be woaɖo ŋu ɖe numeɖeɖe 'yevu.' ko ŋu.
Sheet flatness kple thickness consistency kpɔa ŋusẽ ɖe press nuɖuɖu, ŋkɔ ŋɔŋlɔ, stacking, lamination kple ku lãɖeɖe dzi. Ele be woalé ŋku ɖe nɔnɔme siawo ŋu le agbalẽa katã dzi kple le nuwɔwɔ ƒe hatsotsowo katã me, vevietɔ le kaɖi ƒe ɖoɖo siwo wowɔna zi geɖe kple fli siwo wowɔna le wo ɖokui si gome.
Ele be atikewɔwɔ na anyigba ƒe gowo nasɔ kple nuŋlɔtsi ƒe ɖoɖo si wotia. Ele be kpɔɖeŋu si kpɔ dzidzedze naɖe nɔnɔmetata ƒe go ɖaɖɛwo, dɔyɔyɔ si dzi woda asi ɖo, tsitretsitsi ɖe asiléle ŋu kple eƒe adhesion si li ke le lamination alo downstream dɔwɔwɔ bubuwo megbe afia.
Woate ŋu asɔ kple agbalẽa ƒe didime, eƒe titrime, eƒe gowo ƒe nuwuwu, eƒe lãɖeɖe kple eƒe bablawo wòasɔ kple nuƒlela ƒe nyadzɔdzɔŋlɔlawo ƒe nɔnɔme kple kaɖi ƒe ɖoɖo. Nutata alo ɖoɖo si sɔ pɛpɛpɛ nana kpena ɖe ame ŋu wòɖea gbeɖuɖɔ siwo woɖena ɖa dzi kpɔtɔna eye wòxea mɔ na lolome gɔmesese totro.
Zi geɖe la, wotsɔa kaɖi ƒe ŋutilã si wota kpena ɖe film siwo wotsɔ blaa nu siwo me kɔ ŋu eye le afisi wòhiã le la, wotsɔa antenna inlays, chip modules, magnetic stripes, holographic layers alo signature panels tsakana. Layer stack bliboa—menye core sheet ɖeɖeko o—dea dzesi kaɖi mamlɛtɔ ƒe titrime, kadodo, gbadzaƒe kple anyinɔnɔ.
| Production Stage | Safui Dzikpɔƒe si Wokafu | Kpɔkpɔ |
|---|---|---|
| Agbalẽvi si Wotsɔ Va | Nusi wotsɔ wɔe, eƒe titrime, eƒe lolome, amadede, eƒe anyigba kple eƒe gbadzaƒe | Tsɔe sɔ kple kpɔɖeŋu kple nuƒle ƒe nɔnɔmetata si dzi woda asi ɖo |
| Agbalẽtata | Nuɖuɖu nana, ŋkɔ ŋɔŋlɔ, dɔyɔyɔ, amadede kple alesi woléna ɖe nu ŋu | Nukpɔkpɔ ƒe dodokpɔ kpe ɖe ink-adhesion dodokpɔ ŋu |
| Layer ƒe Takpekpe | Stack mɔfiame nyuitɔ kple overlay/inlay nusiwo sɔ | Kpɔ egbɔ be ewɔwɔ mɔzɔla alo layer ƒe nɔnɔmetata |
| Lamination | Dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi kple fafa | Kpɔ bubbles, warping, yellowing kple bond quality ɖa |
| Lãɖeɖe Kple Aƒoƒo | Ŋkɔ ŋɔŋlɔ, nugbɔ ƒe nyonyome kple didime siwo wowu enu | Dzidze kaɖia ƒe didime eye nàlé ŋku ɖe eƒe goawo ŋu |
| Dadaɖeanyi Mamlɛtɔ | Dzedzeme, titrime, gbadzaƒe kple dɔwɔwɔ ƒe dɔwɔwɔ | Da asi ɖe sika ƒe kpɔɖeŋu aɖe dzi hafi woawɔe le agbɔsɔsɔ gã me |
Agbalẽvi ɣi siwo woate ŋu ata la naa gɔmeɖoanyi dzadzɛ aɖe na nɔnɔmetatawo, ŋkɔwo, dzesidexexlẽdzesiwo, barcodewo kple dzesidewo. Wozãa PVC geɖe na ID bliboa, hamevinyenye, amedzrodzeƒe kple nuteƒewɔwɔ gbalẽviwo, gake woate ŋu abu PC ŋu na ɖaseɖigbalẽ siwo anɔ anyi didi wu alo esiwo ku ɖe dedienɔnɔ ŋu.
Smart card ƒe wɔwɔme ateŋu anye core sheets siwo wota, antenna inlays, chip modules kple overlays. Ele be woaɖo kpe titrime ƒe mama kple lamination ƒe nɔnɔmewo dzi hafi xɔtunu bliboa nakpɔ elektrɔnikmɔ̃awo ta eye wòaɖo kaɖi si wowu enu ƒe nudidi gbɔ.
Substrate ɣi siwo le nyonyome deŋgɔ doa alɔ adzɔnu ƒe amadede, nuŋɔŋlɔ nyuiwo kple boblododo nɔnɔmetatawo. Woate ŋu awɔ nu tɔxɛ siwo wotsɔ wu enu, magnet-ka siwo wotsɔ tsyɔ wo dzi, holographic layers kple signature panels ɖekae le finished-card design nu.
Woateŋu azã PVC kple PC ƒe agbalẽ ƒe dzesi tiatia aɖewo hã na ŋkɔwo, dziɖuɖu ƒe akpawo, nukpɔkpɔwo kple dzesiwo. Ele be woalé ŋku ɖe gota gome, woƒe wɔwɔme, atikewo ƒe kadodo, dzo ƒe nudidiwo kple UV ƒe tsitretsitsi ŋu ɖe vovo elabena nusiwo wotsɔ wɔa kaɖi ƒe dzesi mesɔ na dɔwɔƒewo ƒe dɔwɔwɔ ɖesiaɖe le eɖokui si o.
Nusiwo wɔa dɔ nyuie le agbalẽtamɔ̃ ɖeka dzi ate ŋu abia be woatrɔ asi le wo ŋu le bubu dzi. Kpɔɖeŋu ƒe mɔɖeɖe ƒe ɖoɖo si wowɔ ɖe ɖoɖo nu ɖea afɔku si le ink ƒe gbagbã, lamination ƒe gbagbã, amadede ƒe tɔtrɔ alo didime ƒe kuxiwo dzi kpɔtɔna le ewɔwɔ le agbɔsɔsɔ gã me.
Kpe ɖe dɔa dzi: kaɖi ƒomevi, akpa si wota, dzesideŋkɔ alo dzesiwo ƒe akpa aɖe.
Ðe nusi wotsɔ wɔe gɔme: PVC alo PC, eƒe titrime, eƒe lolome, eƒe amadede kple eƒe gowo.
Na dɔwɔwɔ ŋuti nyatakakawo: agbalẽtamɔ̃, nuŋlɔtsi, dɔyɔyɔ, lamination kple lãɖeɖe dɔwɔnuwo.
Dodokpɔ ƒe kpɔɖeŋuwo: nuɖuɖu, tata ƒe nyonyome, adhesion, lamination, flatness kple lãɖeɖe.
Da asi ɖe sika kpɔɖeŋu aɖe dzi: lée ɖe asi abe nukpɔkpɔ kple dɔwɔwɔ ƒe nufiame ene.
Ðo kpe agbɔsɔsɔme ƒe dzidzenuwo dzi: nusiwo wogblɔ, mɔɖeɖe ɖe nu ŋu, nubablɛ, dzeside kple ŋkuléle ɖe wo ŋu ƒe ɖoɖo.
Ele be woakpɔ agbalẽtata ɣiwo ta tso ke, tsidzadza, ƒoƒo, woƒe tɔtrɔ kple ɖiƒoƒo me. Woate ŋu awɔ ɖoɖo ɖe nubablɛwo ŋu kple ametakpɔnu film, PE kotokuwo, tsi-tsi-tsitretsitsi ƒe babla, kakɛwo, pallets kple custom labels le agbalẽ ƒe lolome kple ɖoɖoɖa mɔnu nu.
Dzra agbalẽawo ɖo gbadzaa ɖe xɔme teƒe si le dzadzɛ eye wòƒu.
Na nu bablawo nanɔ nutrenu vaseɖe esime nusi wotsɔ wɔe la naɖo nɔnɔme siwo me woawɔ wo le gbɔ.
Ƒo asa na ɣe ƒe keklẽ tẽ, dzoxɔxɔ si gbɔ eme, tsidzadza kple nuƒoƒoƒu si mesɔ o vevie.
Tsɔ asigɛ dzadzɛwo tsɔ asigɛ siwo me ɖiƒoƒo ate ŋu akpɔ ŋusẽ ɖe nuŋlɔtsi ƒe léle ɖe nu ŋu dzi le.
Zã lot ƒe dzesidenu siwo dzi wolɔ̃ ɖo be woate ŋu akpɔ wo le nudɔdɔ gbugbɔgawɔɣi.
Factory-direct supply: nuwo kple tɔtrɔ ƒe tiatia na kaɖi dɔwɔƒewo, agbalẽtamɔ̃wo kple mamalawo.
Nusiwo woatsɔ awɔ tiatia ƒe kpekpeɖeŋu: PVC, PC kple kaɖi-agbalẽvi ƒe tiatia siwo do ƒome kplii siwo sɔ kple dɔwɔwɔ si woɖo taɖodzinu na.
Custom specifications: titrime, agbalẽ ƒe lolome, anyigba, amadede, lãɖeɖe kple babla.
Kpɔɖeŋu ƒe kpeɖodzi: woate ŋu ada nuawo kpɔ le nuƒlela ƒe agbalẽtata kple lamination line dzi.
kaɖi ƒe nuzazã siwo wozãna zi ɖeka: agbalẽ veviwo, agbalẽ siwo woate ŋu ata, nusiwo wotsɔ tsyɔ wo dzi kple dɔwɔwɔ ƒe ƒuƒoƒo siwo do ƒome kplii me ɖekae. Woate ŋu adzro
Export dɔa ƒe kpekpeɖeŋu: quotation, specification confirmation, packaging kple shipment coordination na B2B nudɔdɔwo.
| Nyatakaka Siwo Hiã | Kpɔɖeŋu |
|---|---|
| Nu | PVC alo polycarbonate si wotsɔ wɔa dɔe |
| Titrime Kple Mɔɖeɖe ɖe Nu Ŋu | Wobia be wòanye titrime le ŋkɔ me kple tɔtrɔ si dzi woda asi ɖo |
| Agbalẽvi ƒe Agbɔsɔsɔme | A4, A3, 295 × 485 mm alo nutata-si wotu ɖe eƒe lolome si wowɔ ɖe ɖoɖo nu dzi |
| Anyigba ƒe Gome kple Amadede | Matte alo gloss ƒe amadede; yevuwo ƒe nufiame kpɔɖeŋu alo taɖodzinu |
| Agbalẽtata ƒe Dɔwɔna | Offset, UV dijitaal alo seda ƒe screen; ink brand/type le afisiwo wòle |
| Lamination ƒe Dɔwɔɖoɖo | Overlay ƒomevi, inlay layer kple taɖodzinu wu titrime |
| Mᴐbibia | ID-gbalẽvi, SIM-kaɖi, nunana gbalẽvi, panel, dzesidegbalẽvi alo dzesiwo |
| Nudɔdɔ ƒe Agbɔsɔsɔme | Dodokpɔ ƒe agbɔsɔsɔme kple nyagblɔɖi ƒe sia ƒe alo gbugbɔgabia |
| Nubablɛwo Kple Afisi Woayi | Packing ƒe didi, dukɔ si me wotsɔa nuawo yina kple melidzeƒe si woɖo tae |
Dɔa ƒe didime si woŋlɔ ɖi la nye 0.10–0.80 mm, kple titrime siwo wowɔ ɖe ɖoɖo nu siwo li le nusi wotia, ewɔwɔ ƒe ŋutete kple nudɔdɔ ƒe nɔnɔme nu. Na nusi wowɔ vɔ si woɖo taɖodzinu na kple ƒuƒoƒo ƒe wɔwɔme ale be woate ŋu akafu eƒe titrime si sɔ.
Zi geɖe la, wotiaa PVC na kaɖi kple asitsatsa ƒe agbalẽtata si me ga menɔa anyi o, gake wotiaa PC na ŋusẽkpɔɖeamedzi si lolo wu, dzoxɔxɔ ƒe liƒo kple dedienɔnɔ ƒe dɔwɔwɔ. Tiatia nyuitɔ nɔ te ɖe agbalẽtata ƒe ɖoɖoa, lamination ƒe wɔwɔme, subɔsubɔ ƒe nɔnɔme kple gazazã dzi.
Menye ɣesiaɣie o. Offset, UV kple screen printing hiãa anyigbadziŋusẽ kple ink siwo sɔ, gake zi geɖe la, inkjet tata bia be woatsɔ nusi wotsɔ blaa nu tɔxɛ aɖee. Gblɔ agbalẽtamɔ̃ kple nuŋlɔtsi ƒe ɖoɖoa tututu hafi nàtia kpɔɖeŋu.
Ɛ̃. Woate ŋu aƒo nu tso agbalẽa ƒe didime siwo wowɔ ɖe ɖoɖo nu kple etsotso pɛpɛpɛ ŋu. Ðo nɔnɔmetata alo didime kple kekeme pɛpɛpɛ, si me mɔɖeɖe ɖe nu ŋu, dzogoe ene me, dzogoe alo atamkaka ƒe nudidiwo hã le le afisi wòsɔ le.
Woate ŋu aƒo nu tso anyigba siwo ŋu wowɔ nu ɖo le mat, gloss kple agbalẽtata ŋu le nusi wotsɔ wɔe ƒe hatsotso kple dɔa nu. Ele be woado nusi wotia la akpɔ kple nuƒlela ƒe agbalẽtata kple lamination ƒe mɔnu hafi woawɔe le agbɔsɔsɔ gã me.
Ẽ, woate ŋu atsɔ dzesi siwo sɔ akpe ɖe film siwo wotsɔ blaa nu alo esiwo wɔa dɔ siwo sɔ ŋu. Ele be woado xɔtuɖoɖo bliboa kpɔ hena kadodo ƒe ŋusẽ, kuɖɔ, ʋuʋudedi, amadede ƒe tɔtrɔ kple eƒe titrime mamlɛtɔ le lamination ƒe ɖoɖo siwo woɖo la te.
Zi geɖe la, nuƒlelawo zãa ŋkuléle ɖe nu ŋu kple kasɛt alo cross-hatch adhesion mɔnu si dzi wolɔ̃ ɖo. Ele be woawɔ dodokpɔa le eƒe dɔyɔyɔ blibo megbe eye le afisi wòsɔ le la, le lamination alo nutome ƒe nɔnɔme ɖɔɖɔɖo vɔ megbe.
Woate ŋu aƒo nu tso amadede ƒe sɔsɔ ŋu na OEM ƒe nudɔdɔ siwo dze. Na nufiame ŋutɔŋutɔ, amadede ƒe asixɔxɔ alo kpɔɖeŋu si dzi woda asi ɖo, eye nàɖe nukpɔkpɔ alo dzidzedzemɔnu si wozãna hena lɔlɔ̃ ɖe edzi la gɔme.
Woate ŋu abia kpɔɖeŋuwo hena agbalẽtata, dɔyɔyɔ, lamination, lãɖeɖe kple nusiwo wowɔ vɔ ƒe dodokpɔ. Kpɔɖeŋu ƒe anyinɔnɔ, tɔtrɔ ɖe ɖoɖo nu kple agbatsɔtsɔ ƒe ɖoɖowɔwɔ nɔ te ɖe nɔnɔme si wobia dzi.
Nuŋlɔɖi siwo li nɔ te ɖe nusiwo wotia ƒe dzeside kple ɖoɖo si nu wole dzi. Bia mɔ̃ɖaŋununya ŋuti nyatakaka siwo sɔ, ŋkuléleɖenuŋu ŋuti nyatakaka, dedienɔnɔ ŋuti nuŋlɔɖiwo alo sedziwɔwɔ ŋuti nyatakakawo le nyayɔyɔɣi tsɔ wu be nàsusu be nuŋlɔɖi ɖeka le klass ɖesiaɖe si.
Dzra agbalẽawo ɖo gbadzaa, wotu nu ɖe wo nu eye nànɔ xɔ me le teƒe si le dzadzɛ eye wòƒu. Takpɔ agbalẽtaƒea ta tso ke, tsidzadza, ɣe ƒe keklẽ tẽ, dzoxɔxɔ si gbɔ eme, ʋuʋudedi kple ƒoƒo ɖe wo nɔewo dzi si mesɔ o me, eye nàna nuawo natrɔ ɖe nɔnɔmea ŋu hafi nàtae ne ehiã.
Ðo nu, titrime, didime, anyigba, amadede ɣi ƒe nudidi, agbalẽtata mɔnu, lamination wɔwɔme, dɔwɔwɔ, agbɔsɔsɔme, babla kple yiyi. De nutatawo, nuŋlɔtsi ŋuti nyatakakawo alo kpɔɖeŋu aɖe si li xoxo eme ne woli.
Te ɖe Wallis ŋu kple wò nusi nèzã, eƒe titrime, agbalẽa ƒe lolome, agbalẽtatamɔnu kple eŋudɔwɔwɔ. Míaƒe ƒuƒoƒoa ate ŋu ato nɔnɔmeawo me, awɔ ɖoɖo ɖe kpɔɖeŋu tiatia siwo sɔ ŋu eye woadzra dɔwɔƒe ƒe nyayɔyɔ ɖo na wò kaɖi, agbalẽtata alo tɔtrɔdɔa.
