|
PETG kaɖi
Wallis ye nye esia
| Amadede: | |
|---|---|
| Nusi wotsɔ wɔe: | |
| viɖe: | |
| Agbɔsɔsɔ: | |
Wallis naa PETG kaɖi siwo wowɔ ɖe ɖoɖo nu kple PETG core sheets kple Overlay film ƒuƒoƒo siwo me kɔ na gadzraɖoƒewo, kaɖiwɔlawo, mɔɖeɖedzikpɔdɔwɔƒewo, amedzrodzeƒewo ƒe kuxiwo gbɔkpɔnu nana, nuteƒewɔwɔ-ɖoɖowɔlawo, smart-card ƒoƒo ƒu kple mamalawo. Woateŋu awɔ dɔwo abe all- PETG , PETG / PVC composite alo PETG smart-card structures le agbalẽtata, lamination, durability, personalization kple sustainability ƒe nudidiwo nu.
PETG kaɖi ƒe dɔwɔwɔ nɔ te ɖe xɔtutu bliboa dzi tsɔ wu be wòanɔ te ɖe core sheet ɖeɖeko dzi. Ele be woada asi ɖe nu vevi ƒe titrime, si me kɔ Overlay film , agbalẽtata ƒe nuŋlɔtsi, RFID inlay, contact chip, magnetic stripe, adhesive, lamination cycle, fafa kple finished-card ƒe titrime dzi abe ɖoɖo ɖeka ene. Wallis doa alɔ kpɔɖeŋugbalẽviwo kple nuwo dodokpɔ hafi wowɔa wo le agbɔsɔsɔ gã me.
PETG mele be woatsɔ nya siwo ŋu womeda asi ɖo o abe 'woate ŋu agbugbɔ awɔ dɔ le wo ɖokui si,' 'aɖe carbon dzi akpɔtɔ ɣesiaɣi,' 'renewable,' ' UV -proof' alo 'enyo wu PVC le dɔwɔwɔ ɖesiaɖe me o.' Ele be dɔa ƒe nyagbɔgblɔ si li tegbee nade dzesi nenye be dɔa zã ɖetugbui leaƒe PETG , si ŋu woɖo kpee be wogbugbɔ zã PETG , all- PETG structure alo PETG / PVC composite, kple nenye be nuƒoƒoƒumɔ ŋutɔŋutɔ aɖe li le asi si me woayi.
| Adzɔnuwo ƒe Ðoƒe | Custom wu PETG kaɖiwo kpe ɖe PETG nu vevi, agbalẽtata kple Overlay film nunuwo gbɔkpɔnu |
| Xɔtuɖoɖo ƒe Tiatiawɔblɔɖe | All- PETG kaɖi, PETG / PVC kaɖi si wotsɔ ƒo ƒui, PETG RFID kaɖi, PETG kadodo-chip kaɖi alo PETG magnet-kaɖi |
| Agbalẽvi Gbãtɔwo ƒe Agbɔsɔsɔmewo | 295 × 365mm, 480 × 590mm kple ewɔwɔ ƒe lolome siwo wowɔ ɖe ɖoɖo nu |
| Nusiwo Wozãna ƒe Titrime ƒe Agbɔsɔsɔme | 65–400μm le layer ƒe dɔwɔwɔ kple grade nu; finished-card ƒe titrime nye dɔ aɖe koŋ tɔ |
| Agbalẽtata Kple Ewuwu | Offset, seda screen, UV digital, dzoxɔxɔ ƒe asitɔtrɔ, gbugbɔgaɖoɖo kple dɔ tɔxɛ ƒe ame ŋutɔ ƒe tɔtrɔ le kpeɖodzinana megbe |
| Dɔwɔwɔ Siwo Wozãna Zi geɖe | Gadzraɖoƒe, ID, mɔɖeɖe, amedzrodzeƒe ƒe safui, hamevinyenye, nuteƒewɔwɔ, nunana, ʋuɖoɖo, sukuxɔ kple RFID gbalẽviwo |
| B2B Dɔwɔƒewo | Nu ƒe kpɔɖeŋuwo, kpɔɖeŋu gbalẽviwo, layer ƒe nɔnɔme, agbalẽtata dodokpɔwo, lamination dodokpɔ, encoding, QC ƒe nɔnɔmewo kple export supply |
Bia PETG Kpekpeɖeŋugbalẽviwo ƒe Kpɔɖeŋuwo kple B2B Nyayɔyɔ
PETG kaɖi nye plastik kaɖi si wotsɔ laminated si me wozãa PETG na nuto si wota, nu vevi si doa alɔe, si me kɔ Overlay film alo ƒuƒoƒo siawo ƒe ƒuƒoƒo. PETG nye polyester si wotsɔ glycol trɔ asi le si ŋu wode asixɔxɔe le eƒe eme kɔ, eƒe sesẽ kple dzoxɔxɔ ƒe kadodo ta. Woateŋu azãe le xɔtuɖoɖo siwo wotu ɖe PETG dzi bliboe me alo woatsɔe akpe ɖe PVC , PET , adhesive kple electronic layers siwo sɔ ŋu.
Yevu alo amadede PETG core sheet tua card ƒe titrime, opacity kple stiffness. Ate ŋu atsɔ offset, silk-screen alo digital graphics hã ɖe asi. Anyigba ƒe tete, amadede, titrime ƒe mɔɖeɖe kple didime ƒe liƒo le vevie ŋutɔ na agbalẽtata kple lamination si mewɔa tɔtrɔ o.
Clear PETG Overlay film ƒoa nɔnɔmetatawo nu ƒu eye wònaa keklẽ mamlɛtɔ, matte alo etɔxɛ ƒe anyigba. Overlay film ele be woakpɔ eme kɔ, aŋɔ, anyigba ƒe nɔnɔme, kadodo kple ʋuʋudedi ƒe dɔwɔwɔ dzi ɖe vovo tso nu vevi ɣi ƒe agbalẽa gbɔ.
PETG kaɖi si wowɔ vɔ ateŋu anye core sheet geɖewo, Overlay film s eve, ink, adhesive, RFID antenna, chip, magnetic stripe, signature panel, hologram alo personalization film. Akpa ɖesiaɖe trɔa kaɖi ƒe titrime, kadodo, asitɔtrɔ le nɔnɔmewo ŋu kple agbenɔƒe ƒe nuwuwu tiatia.
Yevu PETG Core sheet
Matte si Woate Ŋu Ata PETG Anyigba
| Kpekpeɖeŋugbalẽvi Xɔtutu | Typical Layer Structure | Best-Fit B2B Zazã |
|---|---|---|
| All- PETG Kpekpeɖeŋugbalẽvi | PETG Overlay film + wota PETG nuto + PETG titina ƒuƒoƒo + PETG Overlay film | PVC -free card programs siwo le polymer ƒe wɔwɔme si sɔ wu dim |
| PETG / PVC Kpekpeɖeŋugbalẽvi | PETG core ƒo ƒu kple PVC Overlay film alo PVC kaɖi ƒe ƒuƒoƒo bubuwo | Dɔwɔƒe siwo zãa PVC -siwo sɔ kple dɔwɔwɔ siwo li xoxo kple nusiwo wowɔ ɖekae ƒe nɔnɔmewo |
| PETG RFID Kpekpeɖeŋugbalẽvi | PETG ƒuƒoƒo siwo wota + RFID prelam inlay + PETG alo esiwo sɔ Overlay film s | Amedzrodzeƒe, mɔɖeɖe, ʋuɖoɖo, sukuxɔ me kple wɔnawo ƒe ɖoɖowo |
| PETG Kadodo-Chip Kpekpeɖeŋugbalẽvi | Laminated PETG kaɖi ŋutilã kple milled do kple embedded chip module | Gadzraɖoƒe, fexexe, telefonkadodo kple dedienɔnɔ ŋuti nyatakakawo ƒe dɔbiagbalẽviwo le dzedze vɔ megbe |
| PETG Magnetic-Stripe ƒe Kpekpeɖeŋugbalẽvi | PETG nu vevi kpe ɖe HiCo alo LoCo magnet si sɔ ŋu Overlay film | Amedzrodzeƒe, hamevinyenye, nunana, mɔɖeɖe kple domenyinu ƒe ɖoɖo ƒe ɖoɖowo |
Axa gbãtɔ ƒo nu tso PVC Overlay film nana na PETG / PVC kaɖi siwo wotsɔ ƒo ƒui ŋu. Esia ateŋu anye nuwɔwɔ ƒe tiatia ŋutɔŋutɔ, gake mele be woadzra kaɖia abe PVC -maɖemaɖe alo nu ɖeka ene o. Ele be nutome kple nusiwo wogbugbɔ zãna ƒe nyawo naɖe ƒuƒoƒo ɖesiaɖe afia.
PETG zazã na ƒuƒoƒo gãwo ateŋu ana nusiwo wotsɔ de dzesii nanɔ bɔbɔe, gake ink, chips, antennas, stripes, adhesives kple dedienɔnɔ ƒe nɔnɔmewo ateŋu ana nuwo gbugbɔgazã kple woƒe anyinɔnɔ nasesẽ kokoko. Ele be woado agbalẽvi bliboa kpɔ.
Wolé asixɔxɔ siwo gbɔna la ɖe asi tso Wallis ƒe axa gbãtɔ dzi eye wogbugbɔ ɖo wo ɖe ɖoɖo nu hena dɔnyala ƒe dzɔtsoƒe didi. Ele be woabu wo abe nufiame ƒe asixɔxɔwo ene vaseɖe esime woaɖo kpe dzeside tututu, dodokpɔmɔnu, nɔnɔme, mɔɖeɖe ɖe nu ŋu kple batch ɖaseɖigbalẽ dzi.
| Nɔnɔme | Klɔ PETG fɛ̃ | Yevu PETG Nu vevi | PETG fɛ̃ Nufiame |
|---|---|---|---|
| Eƒe titrime | 65–100μm ƒe didime | 80–400μm ƒe didime | 65–400μm ƒe didime |
| Amadede | Si me kɔ | Ɣi | Ɣi |
| Ŋkume | Gloss si kɔkɔ ŋutɔ | Matte | Matte |
| Anyigba ƒe Teteɖeanyi | ≥36 dynes/cm, agbalẽtata ƒe akpa | ≥38 dynes/cm, agbalẽtata ƒe akpa | ≥38 dynes/cm, agbalẽtata ƒe akpa |
| Tensile Ŋusẽ, MD | ≥38MPa ƒe xexlẽme | ≥40MPa ƒe kpekpeme | ≥40MPa ƒe kpekpeme |
| Toto | 1.28 ± 0.05g/cm⊃3 ƒe kpekpeme; | 1.30 ± 0.05g/cm⊃3 ƒe kpekpeme; | 1.30 ± 0.05g/cm⊃3 ƒe kpekpeme; |
| Vicat ƒe A120 | 76 ± 2°C ƒe dzoxɔxɔ | (77–79) ± 2°C ƒe dzoxɔxɔ | 100 ± 2°C ƒe dzoxɔxɔ; ele be woaɖo kpe dzoxɔxɔ gã ƒe dzeside tututu dzi |
' PETG sheet' ƒe kɔlam etɔ̃lia ɖe Vicat ƒe nufiame si kɔ ŋutɔ fia wu nusiwo me kɔ eye wole ɣie. Ele be nuƒlelawo nabia resin ƒe dzeside tututu, dodokpɔ ƒe ɖaseɖigbalẽ kple layer ƒe dɔwɔwɔ si woɖo be woawɔ hafi azã asixɔxɔ sia le kaɖi ƒe nɔnɔme me.
Custom PETG Kpekpeɖeŋugbalẽvi ƒe Kpɔɖeŋu
Wowu enu PETG Kpekpeɖeŋugbalẽvi ƒe Dɔwɔɖoɖo
ID-1 alo CR80 kaɖi ƒe nɔnɔme si bɔ la anɔ abe 85.60 × 53.98mm ene eye eƒe titrime le ŋkɔ me gogo 0.76mm. Ele be PETG layer ƒe ƒuƒoƒo mamlɛtɔ nabu akɔnta le nutete, ʋuʋu, ink, adhesive, chip, antenna, magnetic stripe kple ame ŋutɔ ƒe nɔnɔmewo ŋu.
| Kpekpeɖeŋugbalẽvi ƒe Akpawo | ƒe Ðoɖowɔwɔ ƒe Nudidi |
|---|---|
| Ŋgɔgbe Overlay film | Tia PETG gauge si me kɔ, nuwuwu, fli alo dedienɔnɔ ƒe nɔnɔme si woate ŋu atia kple kadodo ƒe anyigba |
| Wotae PETG Nu vevi | De substrate gauge, ink film, amadede ƒe nutsyɔnu kple agbalẽtata ƒe ŋkɔ ŋɔŋlɔ ɖe eme |
| Titina Nu vevi / Inlay | Akɔntabubu na xɔtuɖaŋu ƒe agbalẽ, antenna, chip bump, adhesive kple teƒea ƒe do alo spacer |
| Back Printed Core | Da sɔ le ŋgɔgbe ƒuƒoƒoawo me eye nàkpɔ megbenyawo alo asidede teƒewo dzi |
| Trɔ yi megbe Overlay film | De anyigba mamlɛtɔ, fli, asidede agbalẽ te kple ame ŋutɔ ƒe nudidiwo eme |
| Kpekpeɖeŋugbalẽvi si Wowu Nu si Wowɔ Ðe Nɔnɔme Me | Dzidze lolome, titrime, gbadzaƒe kple dɔwɔwɔ le lamination, fafa, punching kple hayahaya megbe |
Ŋgɔgbe kple megbe ƒe ƒuƒoƒo ƒe dzidzenu mawo tɔgbe, agbalẽtata ƒe nutsyɔtsyɔ si da sɔ kple agbalẽwo ƒe ɖoɖo si mewɔa tɔtrɔ o ate ŋu aɖe nuteɖeamedzi susɔea dzi akpɔtɔ. PETG / PVC xɔtuɖoɖo siwo wotsaka hiã na ʋuʋu kple kadodo ƒe dodokpɔ bubuwo.
Nusi wowɔ fifia ŋlɔ 295 × 365mm kple 480 × 590mm. Ele be woaɖe nɔnɔme siwo wowɔ ɖe ɖoɖo nu gɔme tso offset press, lamination plate, card xexlẽme le agbalẽvi ɖeka dzi, ŋkɔ ŋɔŋlɔ ƒe dzesiwo, gripper margin kple punching layout.
| ƒe Mɔnu | Zazã | Si Wobia Be Woaɖo Kpeɖodzi |
|---|---|---|
| Offset ƒe Agbalẽtata | High-volume process color, Pantone nɔnɔmetatawo, fli nyuiwo kple fixed card artwork | Plastik ink, anyigbadziŋusẽ, ƒuƒu, mɔxexe, adhesion kple lamination tsitretsitsi |
| Seda-Screen Tata | Opaque ɣi, ga, teƒe amadede, asidede panel kple dɔwɔwɔ inks | Ink ƒe titrime, solvent ƒe sɔsɔ, dɔyɔyɔ, asitɔtrɔ le nɔnɔmewo ŋu kple layer bonding |
| UV Digitál Agbalẽtata | Duƒuƒu kpuiwo, kpɔɖeŋuwo, nɔnɔmetata siwo trɔna kple kaɖi ƒe ɖoɖowɔɖi siwo wowɔ ɖe ɖoɖo nu | Primer, dɔyɔyɔ, gbɔdzɔe, ʋeʋẽ, asitɔtrɔ le nɔnɔmewo ŋu kple post-lamination adhesion |
| Dzoxɔxɔ / Retransfer Ame ŋutɔ ƒe Nɔnɔme | Ŋkɔwo, fotowo, xexlẽdzesiwo, barcodewo kple nutoa me ƒe tata le agbalẽvi siwo wowɔ vɔ dzi | Agbalẽtamɔ̃ ƒe sɔsɔ, ribbon alo transfer film, dzoxɔxɔ, anyigba kple ʋuɖoɖo |
| Laser ƒe Ame ŋutɔ ƒe Nɔnɔmewɔwɔ | Secure-card ƒe dɔ tɔxɛwo ɖeɖeko | Laser-ŋuɖoɖo ƒe dzeside si wotsɔ ɖe adzɔgbe, nɔnɔmetata ƒe vovototo, dzoxɔxɔ ƒe ŋuɖoɖo kple eƒe anyinɔnɔ dodokpɔ |
PETG ateŋu ana nɔnɔmetata ɖaɖɛwo ne wotsɔ anyigba si woateŋu ata, ink kple agbalẽtamɔ̃ sɔ. Ele be woada asi ɖe amadede ƒe dzidzedze, ink ƒe kpekpeme, mɔ̃, ƒuƒu, anti-setoff dziɖuɖu kple post-lamination amadede ƒe tɔtrɔ dzi kple ewɔwɔ ƒe kpeɖodzi.
Woateŋu atsɔ holographic foil, UV tata, microtext, guilloche, optically variable ink, signature panels kple tactile features akpe ɖe eŋu, gake PETG ŋutɔ menaa dɔwɔwɔ si tsi tre ɖe aʋatsokaka ŋu le eɖokui si o.
ID kple Mɔɖeɖe ƒe Kpekpeɖeŋugbalẽviwo
Hamevinyenye Kple Nuteƒewɔwɔ ƒe Gbalẽviwo
RFID kple Smart card s
Axa gbãtɔ gblɔ be PETG ateŋu anye laminated kple PVC evɔ womatrɔ dɔwɔnuwo o. Woateŋu azã laminator siwo li xoxo, gake mele be woawɔ PVC ƒe nuɖaɖa si sɔ la ƒe kɔpi dodokpɔ manɔmee o. PETG kple PVC to vovo le fafa, ʋuʋu kple dzoxɔxɔ ƒe ŋuɖoɖo me.
Nɔnɔme ƒuƒoƒoawo katã: Na PETG , PVC , nu vevi siwo wota, Overlay film s kple inlays li ke le ewɔwɔ ƒe nɔnɔme me.
Kpe ɖe agbalẽvi ƒe ɖoɖo dzi: Ŋlɔ mɔ̃a ƒe mɔfiame, agbalẽtata ƒe akpa, akpa si wofa nu kple stack ƒe ɖoɖo.
Dze egɔme kple dzoxɔxɔ dodokpɔ si dzi wokpɔna: Tu dzoxɔxɔ, nyaƒoɖeamenu kple nɔnɔ ƒo xlã nusiwo tututu wotsɔ ƒo ƒui.
Takpɔ elektrɔnikmɔ̃wo ƒe akpa aɖewo: Dzra teƒea ƒe nyaƒoɖeamenu si ƒo xlã chip kple antenna la dzi.
Fafa le nyaƒoɖeamenu me: Fafa si dzi wokpɔna naa gbadzaƒe, kadodo kple didime ƒe liƒo nyona ɖe edzi.
Nɔnɔme hafi nàlé ŋku ɖe eŋu: Dzidze eƒe titrime, eƒe ƒoƒo, eƒe ʋuʋu, eƒe lãɖeɖe kple eƒe dɔwɔwɔ le eƒe hayahaya megbe.
Do nuɖaɖa si dzi woda asi ɖo: Ŋlɔ stack, plate, release film, dzoxɔxɔ ƒe nɔnɔme, nyaƒoɖeamenu, ɣeyiɣi kple fafa.
| Lamination Afɔku | Ate Ŋu Atso Nusi Gbɔ Wòtso | Ðɔɖɔɖo Mɔfiame |
|---|---|---|
| Delamination (Dzidzedzekpɔkpɔ). | Dzoxɔxɔ si mesɔ gbɔ o, ƒuƒoƒo siwo mewɔ ɖeka o, nuŋlɔtsi si gbɔdzɔ alo anyigba si ŋu ɖiƒoƒo le | To bond chemistry, agbalẽtata ƒe dɔyɔyɔ, dzadzɛnyenye, dzoxɔxɔ kple nyaƒoɖeamenu me |
| Warpage (Aʋawɔwɔ ƒe Nyatakakadzraɖoƒe). | Layer siwo meda sɔ o, dzoxɔxɔ si gbɔ eme alo fafa si dzi womeɖu o | Da sɔ le stack la me eye nàna dzoxɔxɔ kple fafa nanyo ɖe edzi |
| Bubbles alo Klosalowɔwɔ | Ya si xe mɔ na, tsidzadza, tsi si mekɔ nyuie o alo sisi si mesɔ gbɔ o | Nɔnɔme nuwo, na yaƒoƒo nanyo ɖe edzi eye nàto dzoxɔxɔ/nyaƒoɖeamenu me |
| Amadede ƒe Tɔtrɔ | Ink dzoxɔxɔ ƒe seselelãme, Overlay film nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi alo nɔƒe si gbɔ eme | Dze ink, kpeɖodzi le lamination megbe eye nàɖe dzoxɔxɔ ƒe agba dzi akpɔtɔ |
| Chip alo Antenna ƒe Dodokpɔ | Dzoxɔxɔ, nyaƒoɖeamenu alo mɔfianu ƒe ʋuʋu si gbɔ eme | Zã inlay, dowo, cushioning kple dɔwɔwɔ dodokpɔ siwo sɔ |
| Mɔ̃ɖaŋugbalẽvi | ƒe ŋgɔyiyi Nudidi |
|---|---|
| RFID / NFC | Ðo kpe frequency, chip, protocol, antenna geometry, inlay material, nuxlẽla ƒe didime kple encoding dzi |
| Te ɖe Chip ŋu | Gblɔ chip module, do ƒe lolome, milling goglome, adhesive, module kɔkɔme kple elektrik dodokpɔ |
| Magnetic Stripe ƒe Ʋuƒo | Tia HiCo alo LoCo fli, dzizizi, nɔƒe, Overlay film , encoding kple awudodo ƒe nudidi |
| Barcode / QR-dzesi | Dzɔdzɔmeŋusẽ ƒe vovototo, nuto si me ɖoɖoezizi le, didime ƒe nyateƒetoto, scanner ƒomevi kple abrasion takpɔkpɔ |
| Dual-Interface Card ƒe Kpekpeɖeŋugbalẽvi | Ðoɖowɔwɔ ɖe kadodo module, antenna kadodo, inlay, do milling, lamination kple ɖaseɖigbalẽ |
Ele be woalé ŋku ɖe smart-card ƒe dɔwɔwɔ ŋu hafi lamination, le lamination megbe, le punching alo milling megbe, le ame ŋutɔ ƒe nɔnɔmewɔwɔ vɔ megbe kple le mɔ̃ɖaŋununya ƒe nuteɖeamedzi megbe. Esia kpena ɖe ame ŋu woɖea kpododonu siwo do ƒome kple dɔwɔwɔ ɖe vovo.
RFID kple Kadodomanɔsitɔwo ƒe Kpekpeɖeŋugbalẽvi ƒe Ðoɖowo
Kpekpeɖeŋugbalẽvi Siwo Wota Kple Wo Trɔ Asi Le Ame Ŋu
| Dɔwɔwɔ | PETG Kpekpeɖeŋugbalẽvi ƒe Dɔwɔɖoɖo | Vevi Dodokpɔ |
|---|---|---|
| Gadzraɖoƒe kple Fexexe ƒe Kpekpeɖeŋugbalẽviwo | Wokpɔa kaɖi ƒe ŋutilã, EMV module, fli, dedie tata kple issuer branding | Fexexe-network, chip-module, ame ŋutɔ ƒe tɔtrɔ kple nuwuwu-kaɖi ƒe dzedze |
| ID kple Mɔɖeɖe ƒe Kpekpeɖeŋugbalẽviwo | Foto ƒe nyonyome, barcode, RFID , gbesiagbe awudodo kple nutoa me ƒe ame ŋutɔ ƒe tɔtrɔ | Bending, abrasion, agbalẽtamɔ̃ ƒe sɔsɔ kple nuxlẽla ƒe dɔwɔwɔ |
| Amedzrodzeƒea ƒe Safuigbalẽviwo | Magnetic alo RFID kaɖi si me nɔnɔmetata siwo ŋu ŋkɔ le kple subɔsubɔ ƒe agbenɔƒe kpui va ɖo titina | Lock-system ƒe ɖekawɔwɔ, encoding, fafa kple eŋudɔwɔwɔ enuenu |
| Hamevinyenye Kple Nuteƒewɔwɔ ƒe Gbalẽviwo | Premium tata, QR / barcode, custom anyigba kple adzɔnu ƒe amadede | Gakotoku ƒe vuvu, scanning, anyigba ƒe ʋuʋu kple amadede ƒe liƒo |
| Nunana Kple Agbalẽvi Siwo Woxe Do Ŋgɔ | Asitsaƒe ƒe nutatawo, barcode, scratch panel kple magnetic alo digital activation | Agbalẽtata ƒe nyonyome, scratch panel, barcode kple asitsaƒewo ƒe dɔwɔwɔ |
| Ʋuɖoɖo Kple Sukuxɔ me Kpekpeɖeŋugbalẽviwo | High-cycle contactless card si ƒe ŋutilã nɔa anyi didina eye wota dzesideŋkɔ | Asitsatsa ƒe tsatsam, antenna ƒe blibonyenye, nuxlẽla ƒe didime kple nutome ƒe tsitsi |
| Feature | Available Development Mɔfiame |
|---|---|
| Gloss, Matte alo Frosted Anyigba | Tia Overlay film texture eye nàɖo kpe scratch, personalization kple optical dzedzeme dzi |
| Holographic ƒe Nɔnɔme | Woŋlɔ ŋkɔ ɖe holographic Overlay film , patch alo foil kple tamper kple nukpɔkpɔ dodokpɔ |
| UV kple Fluorescent Agbalẽtata | Dzesi siwo woɣla alo esiwo woɖe ɖe go to ink siwo dze kple ŋkuléleɖenuŋu ƒe ƒutsotsoe ƒe didime zazã me |
| Microtext kple Guilloche ƒe nyawo | Prepress si ƒe nɔnɔme deŋgɔ, agbalẽtata si dzi wokpɔna kple nuxexlẽ le lamination megbe |
| Embossing kple Hot Stamping | Do kaɖi-ŋutilã ƒe ductility, dzoxɔxɔ, foil adhesion kple crack tsitretsitsi kpɔ |
| Asidede Agbalẽ Te ƒe Dɔwɔha | Wota screen-printed alo integrated panel si sɔ kple nuŋɔŋlɔ dɔwɔnu si woɖo be woazã |
| Teƒe | si Wokafu |
|---|---|
| Dzidzeme Kple Eƒe Titrime | Didime, kekeme, dzogoe ƒe didime, titrime kple mɔɖeɖe ɖe nu ŋu le nɔnɔmewɔwɔ vɔ megbe |
| Bending kple Torsion | Gbugbɔ flexing, tegbee deformation, layer gbagbã kple chip dɔwɔwɔ |
| Layer ƒe Adhesion | Peel, edge delamination, dzoxɔxɔ/fafa ƒe tsitsi kple tamper nuwɔna |
| Anyigba ƒe Anyigbadziwu | Scratch, abrasion, gakotoku ƒe vuvu, agbalẽtata ƒe dzedzeme kple hologram ƒe anyinɔnɔ |
| Dzoxɔxɔ Kple Fafa | Warpage, mɔxexe, shrinkage, amadede ƒe tɔtrɔ, kadodo kple elektrɔnik dɔwɔwɔ |
| Atikewo ƒe Agbɔsɔsɔme | Aha, atike si wotsɔna klɔa nu, atike si wotsɔna klɔa ŋutigbalẽ, ŋutigbalẽmi kple atike siwo wozãna koŋ |
| UV kple Yame ƒe Nɔnɔme | Amadede, ɣie, agbalẽtata, keklẽ kple mɔ̃ɖaŋununya ƒe tɔtrɔ; si wobia hafi woabia gota |
| Encoding kple Nuxexlẽ ƒe Dɔwɔwɔ | Magnetic, contact kple contactless dɔwɔwɔ do ŋgɔ na mɔ̃ɖaŋu/nutome ƒe nuteɖeamedzi kple emegbe |
Womate ŋu anɔ te ɖe PETG nusiwo wotia dzi ko ƒe atɔ̃ ƒe subɔsubɔ ƒe agbenɔƒe ƒe nya o. Ele be kaɖi ƒe wɔwɔme, eƒe titrime, elektrɔnikmɔ̃wo, agbalẽtata, zazã ƒe nɔnɔme kple dodokpɔ nado alɔ agbenɔƒe si wogblɔ.
| Nuwo ƒe | Ŋusẽ | Nu Vevi Siwo Ŋu Woabu |
|---|---|---|
| PETG | Eme kɔ nyuie, sesẽme, dzoxɔxɔ ƒe kadodo kple kaɖi-wɔwɔ ƒe ŋutete sesẽ | Hiã agbalẽtata kple lamination si dze; nusiwo wogbugbɔ zãna ƒe anyinɔnɔ to vovo |
| PVC | Woɖo ɖoɖo si mexɔ asi o, nana si keke ta kple agbalẽtata/ame ŋutɔ ƒe nɔnɔme si wonya nyuie | Polymer si me chlorine le kple kaɖiwo gbugbɔgazã si seɖoƒe li na le asi geɖe me |
| Polycarbonate si wotsɔ wɔa dɔe | Dzoxɔxɔ gã, ŋusẽkpɔɖeamedzi kple dedienɔnɔ ƒe dɔwɔwɔ; laser-ame ŋutɔ ƒe nɔnɔme tiatia | Gazazã si lolo wu kple ewɔwɔ dɔwɔnuwo/dɔwɔwɔ ƒe fesre vovovowo |
| Wogbugbɔ zãe PETG | Ate ŋu aɖe ɖetugbui leaƒe ƒe aŋɔ ƒe didi dzi akpɔtɔ ne woɖo kpe nusiwo wogbugbɔ zã dzi | Dzro amadede, ɖiƒoƒo, mɔ̃ɖaŋununya ƒe nɔnɔmewo, dzɔtsoƒe kple ɖaseɖigbalẽ |
| PETG / PVC Nusiwo wowɔ ɖekae | Ate ŋu asɔ ɖe nuwɔwɔ ƒe ɖoɖo siwo li fifia nu eye wòaƒo ƒuƒoƒo ƒe dɔwɔwɔ tiatia aɖewo nu ƒu | Mixed-polymer structure menye PVC -free o eye ateŋu asesẽ wu be woagbugbɔ awɔe |
| Nyabiasewo | B2B Zazã Nyuie |
|---|---|
| PVC -Famaxee PETG Kpekpeɖeŋugbalẽvi | Ne PVC aɖeke mele kaɖia ƒe ŋutilã bliboa, Overlay film } kple nutsyɔnu siwo sɔ me ko hafi nàzãe. |
| PETG Kpekpeɖeŋugbalẽvi si woate ŋu azã ake | Ðo kpe nuƒoƒoƒu kple wo gbugbɔgazã ƒe tɔsisi si sɔ dzi na agbalẽvi si wowɔ vɔ kple eƒe akpawo |
| Wogbugbɔ zã PETG Nusiwo le eme | Gblɔ alafa memamã, dzɔtsoƒe, akɔntabubu mɔnu kple ɖaseɖigbalẽa ƒe lolome |
| Nu Gbagbewo Dzi PETG | Mègabia be woate ŋu awɔ nu yeyewo o negbe ɖe aŋɔ si wona la ɖo kpe carbon ƒe nuŋlɔɖi siwo wotu ɖe nugbagbewo dzi dzi hafi |
| Carbon Footprint si bɔbɔ ɖe anyi | Kpekpeɖeŋu kple agbenɔƒe alo nusi wowɔ-kabɔn tsɔtsɔ sɔ kple wo nɔewo to kaɖi ƒe dɔwɔwɔ kple agbenɔƒe si sɔ zazã me |
| Nutoa Me Xɔlɔ̃wɔwɔ ƒe Kpekpeɖeŋugbalẽvi | Tsɔ nɔnɔme tɔxɛ siwo wotu ɖe kpeɖodzi dzi abe PVC -maɖemaɖe alo nusiwo wogbugbɔ zã si ŋu woɖo kpee ene ɖɔ li gbegbɔgblɔ gbadzaa |
Zi geɖe la, standard PETG nye esi wotu ɖe petrochemical dzi eye megblẽa nu le nugbagbewo ŋu alo woate ŋu atsɔe awɔ gbeɖuɖɔ o. PETG si wogbugbɔ zã kple bio-attributed grades nye dzɔtsoƒe ƒe tiatia vovovo siwo hiã nuŋlɔɖi tɔxɛwo.
PETG menye kaɖi ƒe nu si ƒe asi bɔbɔ wu le eɖokui si o. Nusiwo wotsɔ sɔ kple wo nɔewo nyuie la lɔ nu xoxowo, agbalẽtata ƒe kutsetse, lamination ƒe kutsetse, dɔwɔnuwo ƒe tɔtrɔ, chip ƒe gbegblẽ, kaɖi siwo wogbe, ame ŋutɔ ƒe tɔtrɔ, subɔsubɔ ƒe agbenɔƒe, gbugbɔgaɖe kple nusiwo li tegbee ŋuti nuŋlɔɖiwo ɖe eme.
| Gazazã Ʋukulawo | B2B Dzodzro |
|---|---|
| Nusiwo Wozãna ƒe Gazazã | Tsɔ PETG , PVC , PC kple nusiwo wogbugbɔ zã ƒe tiatia sɔ kple wo nɔewo le woƒe titrime kple nyonyome si sɔ me |
| Agbalẽtata ƒe Kutsetse | De feeder ƒe dɔwɔwɔ, ink cure, amadede ƒe ɖekawɔwɔ, mɔxexe kple gbugbɔgawɔ |
| Lamination ƒe Kutsetse | Dzidze bubbles, curl, delamination, chip ƒe gbegblẽ kple plate ƒe asiɖeɖe le eŋu |
| Dɔwɔnuwo ƒe Ðekawɔwɔ | Kpɔe ɖa be agbalẽtamɔ̃ siwo li xoxo, laminators, punches kple printers hiã parameter tɔtrɔ alo upgrades |
| Subɔsubɔdɔ ƒe Agbenɔnɔ | Zã nusi ŋu woɖo kpee be enɔa anyi didina le dɔwɔwɔ tɔxɛ aɖe me tsɔ wu be nàzã nusiwo wotsɔ wɔa dɔe ƒe agbenɔƒe ŋuti nya si wogblɔna le mɔ vovovowo nu |
| Sedziwɔwɔ Kple Nusiwo Wobia | De nusiwo wogbugbɔ zã ƒe kpeɖodzi, dodokpɔ, asisiwo ƒe agbalẽdzikpɔkpɔ kple asi tɔxɛ ŋuti nuŋlɔɖiwo eme |
| ƒe Nu | Dzikpɔkpɔ si Wokafu |
|---|---|
| Nuwo ƒe Dzesidede Ame | Ðetugbui leaƒe alo esi wogbugbɔ zã ƒe grade, resin batch, nusi wowɔ ƒe kɔpi kple ɖaseɖigbalẽ ƒe nufiame |
| Agbalẽa ƒe Titrime Kple Eƒe Agbɔsɔsɔme | Mamã dedie ƒe dzidzenu, teƒe ƒe tɔtrɔ, didime, kekeme, dzogoe ene me kple lãɖeɖe ƒe mɔɖeɖe |
| Nukpɔkpɔ Kple Amadede ƒe Nyonyome | Yevuwɔwɔ, opacity, L*a*b*, haze, eme kɔ, keklẽ, teƒe yibɔwo kple ɖiƒoƒo |
| Anyigba ƒe Nyonyome | Anyigba ƒe tete, nɔnɔme, ʋuʋudedi, atikewɔwɔ ƒe akpa, ke kple ametakpɔnu babla |
| Agbalẽtata ƒe Dodokpɔ | Adhesion, ƒuƒu, density, trapping, Pantone match, nuŋɔŋlɔ nyui, QR kple barcode |
| Lamination Dodokpɔ | Peel ŋusẽ, haze, bubbles, shrinkage, curl, amadede ƒe tɔtrɔ kple chip takpɔkpɔ |
| Wowu Kpekpeɖeŋugbalẽviwo Me Dzodzro Nu | Dzidzeme, titrime, gbadzaƒe, dzogoe ƒe didime, nugbɔ ƒe nyonyome, agbalẽtata kple anyigba ƒe nɔnɔme madeamedziwo |
| Mɔ̃ɖaŋununya ƒe Dɔwɔwɔ | Chip, antenna, magnetic stripe, barcode kple nuxlẽla/encoder ƒe ɖekawɔwɔ |
| Nusiwo woate ŋu akpɔ | Nu geɖe, agbalẽtata ƒe akpa, inlay lot, lamination batch, kaɖi ƒe hatsotso kple ŋkuléle ɖe nuŋlɔɖi |
PETG kaɖi wɔwɔ ɣesiaɣi bia be woaɖe agbalẽ si li ke, amadede kple titrime dzi kpɔkpɔ, lãɖeɖe dzadzɛ, tata, inlay dzadzraɖo, lamination, punching, chip alo stripe dɔwɔwɔ, ame ŋutɔ ƒe nɔnɔme kple ŋkuléle ɖe eŋu mamlɛtɔ. Ele be woalé kpɔɖeŋu si dzi woda asi ɖo, nutata kple nuŋɔŋlɔ ƒe nɔnɔmetatawo ɖe asi abe nuwɔwɔ ƒe nufiame ene.
PETG Core sheet kple Kpekpeɖeŋugbalẽviwo wɔwɔ
Dzra PETG agbalẽwo ɖo gbadzaa, wotre wo nu eye woakpɔ wo ta tso ɣe ƒe keklẽ, dzoxɔxɔ, ke kple asibidɛwo ƒe dzesiwo me.
Ƒo asa na pallet ƒe kpeɖeŋutɔ si mesɔ o kple stack ƒe nyaƒoɖeamenu si gbɔ eme si ate ŋu ana wòaƒo alo axe mɔ.
Dzra nu siwo le agbalẽtata kple lamination xɔa me ɖo hafi nàtrɔ asi le wo ŋu.
Miɖe agbalẽvi siwo wota ɖe vovo siwo dzi woda asi ɖo be woatsɔ wo aƒo ƒui ne ehiã be woaxe mɔ ɖe ʋuʋu nu.
Mibla agbalẽvi siwo wowɔ vɔ le xexlẽme siwo dzi wokpɔ ŋusẽ ɖo me kple ametakpɔnu film, aɖaka ememetɔwo kple aɖaka siwo wotsɔ ɖoa duta.
Zã nusi me tsi mate ŋu abla o, dzogoe takpɔkpɔ kple pallet ƒe liƒolili na dukɔwo dome ʋuɖoɖo.
Zã nudzraɖoƒe gbãtɔ, gbãtɔ-do go eye nàlé adzɔnu, lot kple card-batch traceability me ɖe asi.
Nusiwo Wokpɔ Tae ƒe Babla
Dzadzraɖo ɖe Nudɔdɔ Siwo Woɖo Ðe Duta Ŋu
Factory-Direct PETG Kpekpeɖeŋugbalẽvi kple Nuwo ƒe Nana
ɖeka kple kaɖi ƒe kuxia gbɔkpɔnu: PETG core, Overlay film , agbalẽtata, inlay, lamination kple finished-card supply. Woate PETG Overlay film
Dɔwɔnu geɖewo: Woateŋu awɔ All- PETG , PETG / PVC composite, RFID , contact-chip kple magnetic-stripe kaɖiwo.
Agbɔsɔsɔme kple dzidzenu siwo wowɔ ɖe ɖoɖo nu: Woate ŋu atsɔ layer ƒe titrime kple production-sheet ƒe lolome asɔ kple agbalẽtamɔ̃ kple kaɖi ƒe nɔnɔme.
Agbalẽtata kple lamination dodokpɔwo: Woate ŋu ado kpɔɖeŋuwo kpɔ be woƒe amadede, woƒe adhesion, peel, warpage kple finished-card ƒe dɔwɔwɔ hã.
Agbanɔamedzi ƒe kpekpeɖeŋunana le nusiwo li tegbee ŋu: Woateŋu ato PVC -free, recycled-content kple composite-card ƒe nyawo me ɖe ɖoɖo si tututu wowɔ nu.
Factory-direct B2B supply: Esɔ na card wɔlawo, nana, integrators, amedzrodzeƒe ɖoɖowo, gadzraɖoƒewo, importers kple mama.
Wowu kaɖi ƒe dɔwɔwɔ nu, asi si woɖo taɖodzinu na kple subɔsubɔ ƒe agbenɔƒe si wokpɔ mɔ na.
Dɔwɔɖoɖo si hiã: katã- PETG , PETG / PVC ƒokpli, RFID , kadodo ƒe chip alo magnetic stripe.
Wowu kaɖi ƒe lolome, eƒe titrime, dzogoe ƒe didime kple agbɔsɔsɔme.
PETG layer ƒe titrime, amadede ɣi/si me kɔ, opacity, gloss alo matte finish.
Nutata, Pantone ƒe amadedewo, agbalẽtata ƒe mɔnu, nyatakaka siwo trɔna kple ame ŋutɔ ƒe tɔtrɔ ƒe ɖoɖo.
RFID chip, frequency, antenna, contact module, magnet-ka alo asidede agbalẽ te.
Dedienɔnɔ ƒe nɔnɔmewo abe hologram, UV tata, microtext alo scratch panel.
Wohiã PVC -maɖemaɖe, nusiwo wogbugbɔ zã, REACH , RoHS alo nuŋlɔɖi bubuwo.
Prototype agbɔsɔsɔme, ƒe sia ƒe nyagblɔɖi, packing kple yiyi melidzeƒe.
Ðoɖowɔɖi si wobia be woatsɔ aɖoe kple mɔɖeɖe/dodokpɔ ƒe ɖoɖo.
Dzro Wò Kɔkɔe PETG Kpekpeɖeŋugbalẽvi Dɔwɔna me
PETG kaɖi zãa PETG abe nuto si wota, xɔtuɖoɖo ƒe ƒuƒoƒo, Overlay film si me kɔ alo ƒuƒoƒo ƒe ƒuƒoƒo ene. Woateŋu awɔe abe all- PETG alo composite card ene.
PETG core sheet nye raw card-wɔwɔ ƒe ƒuƒoƒo. PETG kaɖi nye nusi wowɔ vɔ le agbalẽtata, lamination, punching, ame ŋutɔ ƒe tɔtrɔ kple chip alo stripe ƒoƒo ɖekae si woateŋu awɔ vɔ megbe.
Ɛ̃. Dɔwɔnawo ateŋu anye PETG core kple Overlay film nusiwo, kaɖi ƒe ŋutilã siwo wota, kaɖi ƒuƒluwo alo kaɖi siwo wowɔ na ame ŋutɔ si wowu enu le nɔnɔme si dzi wolɔ̃ ɖo nu.
Axa gbãtɔ yɔ 65–100μm ƒe agbalẽ si me kɔ, 80–400μm ɣi PETG nuto kple 65–400μm PETG agbalẽ. Ele be woaɖo kpe dzeside si tututu woxɔ kple mɔɖeɖe ɖe nu ŋu dzi.
Ɛ̃. CR80/ID-1 ƒe nɔnɔme si bɔ la ade 85.60 × 53.98mm. Ele be woaɖo kpe eƒe titrime si wowu enu kple eƒe mɔɖeɖe ɖe eŋu dzi le nɔnɔmewɔwɔ vɔ megbe.
Durability nɔ te ɖe grade, layer design, titrime, lamination kple zazã ƒe nɔnɔmewo dzi. PETG ateŋu ana sesẽ sesẽ, gake ele be woado kaɖi si wowu tsɔtsɔ sɔ kple wo nɔewo kpɔ hena dɔwɔwɔ si woɖo be woawɔ.
Ɛ̃. Zã nusi sɔ si woate ŋu ata kple offset ink si sɔ kple plastic. Do tsidzadza, adhesion, ƒuƒu, mɔxexe kple post-lamination amadede kpɔ.
UV woateŋu awɔ dijitaal, dzoxɔxɔ ƒe asitɔtrɔ kple gbugbɔgaɖoɖo ƒe dɔwɔwɔ ƒe ɖoɖowo. Ele be woada asi ɖe agbalẽtamɔ̃, nuŋlɔtsi alo lãgbalẽ, kaɖi ƒe anyigba kple dzoxɔxɔ ƒe sɔsɔ dzi.
Ẽ, woateŋu ato xɔtuɖoɖo siwo wotsɔ ƒo ƒui vɛ, gake ele be woado PETG / PVC kadodo, ʋuʋu, ƒoƒo, dzoxɔxɔ kple tsitsi kpɔ. Nusi do tso eme menye PVC -femaxee kaɖi o.
PETG ƒuƒoƒo siwo sɔ ate ŋu abla ɖe wo nɔewo ŋu le dzoxɔxɔ me, gake nuŋlɔtsi, nusiwo wotsɔ blaa nu, nusiwo wotsaka kple elektrɔnik nusiwo wotsɔ blaa nu ate ŋu atrɔ kadodo. Ele be woado aŋgbawo kpɔ.
Woateŋu azã agbalẽtamɔ̃, laminators kple punch siwo li xoxo, gake ele be woawɔ ɖoɖowo wòanyo na PETG . Mègatsɔe be PVC ƒe nuɖaɖa si sɔ la ana nu ma ke nado tso eme o.
Ɛ̃. Ele be woaɖe chip ƒe kpɔɖeŋu, frequency, antenna, inlay material, pressure, dzoxɔxɔ, card ƒe titrime, encoding kple nuxlẽla ƒe ɖekawɔwɔ gɔme.
Ɛ̃. Contact-chip cards hiã cavity milling, module adhesive, surface-flatness dziɖuɖu kple elektrik dodokpɔ le embedding megbe.
Ɛ̃. Woateŋu awɔ HiCo kple LoCo magnetic-stripe tiatia kple Overlay film , teƒe nyuitɔ, encoding kple dodokpɔ si sɔ.
Ɛ̃. Woateŋu awɔ holographic Overlay film s, UV inks, microtext kple nɔnɔme bubuwo ɖekae to agbalẽtata kple lamination ƒe ɖoɖo vovovowo me.
PETG nye nusi woateŋu agbugbɔ awɔ le mɔ̃ɖaŋununya nu le tɔsisi si sɔ me, gake kaɖi siwo wowɔ vɔ ateŋu anye ink, chips, antennas, stripes kple mixed layers. Ele be woaɖo kpe nutoa me nuƒoƒoƒu kple dɔwɔwɔ dzi.
Ao. PETG / PVC kaɖi si wowɔ ɖekae la me PVC le. Zã PVC -free claim ne woɖo kpe kaɖi ƒe ɖoɖo bliboa si woɖo la dzi ko.
Zi geɖe la, dzidzenu PETG nye esi wotu ɖe petrochemical dzi. Bio-based alo bio-attributed content hiã resin ƒe dzesi tɔxɛ aɖe kple nuŋlɔɖi siwo akpe ɖe eŋu.
Mele be woaƒo nya ta le xexeame katã o ne womewɔ agbenɔnɔ ƒe ɣeyiɣi alo nusiwo wowɔ kple carbon ƒe dodokpɔ si sɔ kple wo nɔewo si ku ɖe nusiwo wotsɔ wɔe, nuwɔwɔ, dɔwɔwɔ ƒe agbenɔƒe kple agbenɔƒe ƒe nuwuwu ŋu o.
Gbedoxɔ me zazã bia UV , dzoxɔxɔ, fafa, tsi kple abrasion dodokpɔ. Mele be woaɖɔ dzidzenu PETG be yame ƒe nɔnɔme mete ŋu gblẽa nu le eŋu ne kpeɖodzi aɖeke mele grade- kple xɔtutu ŋu o.
Woateŋu adzro PETG tiatia siwo wogbugbɔ zã me le nusiwo hiã, amadede, dɔwɔwɔ, woƒe anyinɔnɔ, MOQ kple nuŋlɔɖiwo nu.
Ɛ̃. Ele be woata nuwo ƒe kpɔɖeŋuwo alo kpɔɖeŋugbalẽviwo, aƒo wo nu ƒu, aƒo wo, woatrɔ asi le wo ŋu eye woado woƒe dɔwɔwɔ kpɔ hafi woawɔ wo le agbɔsɔsɔ gã me.
MOQ nɔ te ɖe nenye be nudɔdɔa nye agbalẽ xoxo, agbalẽvi ƒuƒlu alo agbalẽvi siwo wowɔ vɔ, tsɔ kpe ɖe eƒe titrime, amadede, wɔwɔme, chip, agbalẽtata, dedienɔnɔ ƒe nɔnɔmewo kple nubablɛwo ŋu.
Na kaɖi ƒe dɔwɔwɔ, eƒe wɔwɔme, eƒe lolome, eƒe titrime, nutata, agbalẽtata, chip alo stripe, dedienɔnɔ ƒe nɔnɔmewo, agbɔsɔsɔ, sedziwɔwɔ ƒe hiahiãwo, babla kple teƒe si woayi.
Te ɖe Wallis Plastic ŋu hena PETG kaɖi siwo wowɔ ɖe ɖoɖo nu, PETG core sheets kple Overlay film nusiwo me kɔ na gadzraɖoƒe, ID, mɔɖeɖe, amedzrodzeƒe, hamevinyenye, nunana, ʋuɖoɖo kple smart-card ɖoɖowo. Míaƒe ƒuƒoƒoa doa alɔ layer design, agbalẽtata, lamination, RFID kple chip ƒoƒo ƒu, nutome nuŋlɔɖiwo, prototype dodokpɔ kple dɔwɔƒe- tẽ B2B nana.
