12mm UV-Resistant Anti-Scratch Polycarbonate for Padel Court

12mm UV-Resistant Anti-Scratch Polycarbonate Sheet for Padel Court

Wallis 12mm UV-resistant anti-scratch polycarbonate sheet is a hard-coated transparent PC panel developed for padel court wall projects, outdoor sports enclosures, safety glazing and other high-impact transparent protection applications. It combines the impact strength of solid polycarbonate with a wear-resistant surface coating designed to improve scratch, abrasion, chemical and outdoor weather resistance.

The current clear grade provides approximately 90% visible light transmission with listed haze below 0.5%. Standard and customized dimensions include 1020 × 2040 mm, 1220 × 2440 mm, 1995 × 1995 mm and 1995 × 2495 mm, while the wider product family can be supplied from 1–50 mm thickness according to project requirements.

For padel court manufacturers and sports-facility contractors, the 12mm option offers a transparent, shatter-resistant panel solution with UV protection and hard surface coating. Final suitability must be evaluated as part of the complete court system, including panel stiffness, frame design, fastening, ball rebound, thermal expansion, wind load and applicable local or federation requirements.

UV-Resistant Anti-Scratch Hard-Coated Polycarbonate Sheet

12mm Padel Court Polycarbonate Sheet at a Glance

Important: 12mm thickness alone does not guarantee compliance with a specific padel court standard or tournament homologation. Final panel dimensions, frame spacing, fastening system, structural loading, surface behavior and ball rebound should be validated for the complete court design.

Product Specifications

Hard-Coating Performance Test Results

The following values are based on the currently listed Wallis coating test data. Buyers requiring contractual technical specifications should request the applicable TDS, test report and approved production sample for the ordered grade.

Hard-Coated Polycarbonate PC Sheet

Clear Anti-Scratch PC Panel

Why Use Hard-Coated Polycarbonate for Padel Court Projects?

High Impact Resistance

Solid polycarbonate is selected for transparent safety applications because of its high impact resistance and shatter-resistant behavior. For sports environments, this can reduce the risk of dangerous panel fragmentation compared with brittle glazing materials.

UV Protection for Outdoor Installations

Outdoor transparent polycarbonate requires UV protection because long-term solar exposure can otherwise affect optical appearance and material performance. The UV-resistant construction is intended to improve weathering performance for exposed sports and glazing applications.

Anti-Scratch Hard Coating

Standard polycarbonate is relatively easy to scratch. A hard surface coating improves abrasion resistance during cleaning, handling and repeated use, helping transparent court panels retain clearer visibility for longer.

High Optical Clarity

The currently listed clear sample has approximately 90% visible light transmission and haze below 0.5%, supporting transparent court enclosures where player, spectator and camera visibility are important.

Chemical and Water Resistance

The hard coating is designed to improve resistance to environmental exposure and common cleaning conditions. Chemical compatibility should still be verified before using strong cleaners, solvents or maintenance chemicals.

Custom Panel Dimensions

Wallis can supply standard sheets or project-specific dimensions according to padel court frame geometry, hole positions and installation requirements. Buyers should provide drawings before production for non-standard projects.

Advantages of 12mm Hard-Coated PC Sheet

Padel Court Wall Performance Requirements

A transparent wall panel for a padel court is not evaluated only by material strength. The complete enclosure must provide stable geometry, a smooth playing surface and predictable ball rebound while remaining safe for player contact.

Ball Rebound Consistency

Polycarbonate stiffness, panel dimensions, support spacing and fastening influence how the wall behaves when hit by a ball. Buyers developing competition or commercial courts should validate rebound behavior on the finished assembly rather than assuming that thickness alone determines performance.

Panel Flatness and Surface Smoothness

The playing surface should remain flat and smooth after installation. Frame tolerances, fastening pressure and thermal movement should be controlled to avoid excessive panel bowing or local deformation.

Structural Engineering

Outdoor court walls are part of a structural system exposed to wind, temperature change, player contact and repeated impacts. Panel dimensions, support spacing, holes, fasteners and steel-frame design should therefore be reviewed by the court manufacturer or structural engineer.

Federation and Local Compliance

If the court is intended for regulated competition, club certification or public use, confirm the applicable federation, homologation, building-code and safety requirements before approving polycarbonate as the final wall material.

12mm Polycarbonate vs Tempered Glass for Padel Courts

Padel Court Applications

Transparent Padel Court Wall Panels

The 12mm hard-coated PC sheet can be evaluated for transparent padel wall systems where high impact resistance, clear visibility and outdoor weather protection are required. Panel dimensions and fixing details should be engineered for the specific court structure.

Panoramic and Custom Court Projects

Large transparent wall areas require careful control of panel deflection and support spacing. For panoramic designs, provide the complete steel-frame drawing, panel dimensions, fixing positions and required court standard before final material approval.

Outdoor Sports Enclosures

Beyond padel, UV-resistant hard-coated PC can be used for transparent barriers and protective panels in sports facilities where frequent impact, outdoor exposure and visibility are important.

Padel Court Wall Project

Outdoor Padel Court

Installation Considerations for 12mm PC Court Panels

Allow for Thermal Expansion

Polycarbonate expands and contracts with temperature. Holes, channels, fasteners and frame clearances should be designed with appropriate movement allowance rather than clamping the panel rigidly without expansion space.

Control Panel Deflection

Panel stiffness affects both appearance and ball rebound. Frame spacing and fastening should limit excessive movement while avoiding local stress concentrations around drilled holes.

Use Suitable Fasteners and Gaskets

Mechanical fixing systems should distribute pressure evenly. Compatible washers, gaskets and frame materials can help prevent concentrated loads, rattling and direct metal-to-PC stress.

Protect the Hard-Coated Surface

Keep protective masking in place during transport, drilling and installation wherever practical. Avoid dragging tools or hardware across the coated surface.

How to Choose PC Sheet for a Padel Court Project

1. Confirm Court Type and Applicable Standard

Tell Wallis whether the project is a recreational court, commercial club court, panoramic court, temporary installation or competition project. Applicable local and federation requirements should be identified before approving the wall material.

2. Provide Panel Dimensions

Provide the finished panel width and height rather than only the raw sheet size. Large panels behave differently from smaller panels and may require different structural support.

3. Confirm 12mm or Another Thickness

Although 12mm is the targeted specification on this product page, Wallis lists a wider 1–50mm range. Final thickness should be determined from structural design, support spacing, rebound requirements and safety calculations.

4. Confirm One-Side or Two-Side Hard Coating

For a court wall exposed to players, balls, cleaning and outdoor conditions on both sides, specify which surfaces require hard coating and UV protection. Confirm the exact coating construction before placing the bulk order.

5. Provide Hole and Edge Details

If panels require pre-drilled holes, slots, CNC machining or edge processing, provide a dimensioned drawing showing hole diameter, center distance, edge distance and tolerance requirements.

6. Specify Outdoor Climate

Provide the project location, temperature range, UV exposure, humidity and wind environment so coating and installation requirements can be evaluated more accurately.

Additional Applications of Anti-Scratch Polycarbonate Sheet

The same combination of transparency, impact resistance and abrasion-resistant coating is useful in industrial, commercial and protective glazing applications where ordinary polycarbonate may scratch too easily.

Touch Screen

TV Cover

Padel Court

Furniture Cover

Blackboard Protection

Vehicle / Shade Panel

Transparent Enclosure

Machine Guard

Manufacturing and Quality Control

Hard-coated polycarbonate for sports and safety glazing requires control of both the base PC sheet and the coating process. Wallis performs project-based inspection to support consistent optical and surface performance.

• Thickness and dimensional inspection

• Visible light transmission and haze inspection

• UV accelerated aging evaluation

• Impact resistance evaluation

• Abrasion and scratch resistance testing

• Hard-coating adhesion testing

• Surface appearance inspection

• Project-specific sample verification before bulk supply

Workshop and Hard-Coating Production

Clean Workshop

Inspection

Hard Coating

Cleaning and Maintenance of Hard-Coated PC Panels

Use Non-Abrasive Cleaning Tools

Use soft cloths, clean water and cleaning products confirmed as compatible with polycarbonate and the hard coating. Avoid abrasive pads that can gradually damage the transparent surface.

Confirm Chemical Compatibility

Do not assume every glass cleaner or solvent is suitable for polycarbonate. If strong cleaners, disinfectants or graffiti-removal chemicals are required, test them on a sample or request a chemical-compatibility recommendation first.

Inspect Fasteners and Panel Movement

Court maintenance should include inspection of panel fixings, gaskets, frame movement and surface damage. Loose hardware or excessive movement can affect panel safety and playing behavior even if the sheet itself remains undamaged.

Custom Manufacturing for Padel Court Builders

Wallis supports court manufacturers, sports-equipment companies, distributors and project contractors requiring customized hard-coated polycarbonate panels.

• 12mm padel court panel supply

• 1–50mm customized thickness range

• Custom sheet and finished panel dimensions

• Clear and customized colors

• UV-resistant surface treatment

• Hard anti-scratch coating

• Project-specific coating-side configuration

• CNC machining and drilling requirements

• Sample testing

• Custom protective masking

• Export packaging

• OEM / project-based supply

Information Needed for an Accurate Quote

• Court type and target market

• Required panel thickness

• Finished panel width and height

• Required quantity

• Frame spacing and support design

• Hole diameter and hole positions

• One-side or two-side coating requirement

• UV exposure and outdoor climate

• Required light transmission or haze target

• Applicable sports, building or safety standard

• Packing method

• CAD / PDF drawing where available

Global B2B Supply

Wallis supplies hard-coated polycarbonate sheets to padel court manufacturers, sports-facility suppliers, transparent safety-glazing companies, equipment manufacturers and distributors requiring customized outdoor and impact-resistant panels.

Company Daily Operations

Customer Feedback

Wallis focuses on stable sheet quality, project communication, sample verification and responsive supply support for international polycarbonate sheet buyers.

Frequently Asked Questions About 12mm Padel Court PC Sheet

Is this product PET sheet or polycarbonate sheet?

This product is polycarbonate / PC sheet, not PET. The current product model, technical content and material description all refer to hard-coated polycarbonate.

Is 12mm polycarbonate automatically approved for a padel court?

No. Thickness alone does not determine compliance. The complete wall system must be evaluated for stiffness, ball rebound, surface smoothness, mounting, structural safety and applicable local or competition requirements.

What is the light transmission of the clear PC sheet?

The currently listed tested sample shows approximately 90% visible light transmission. Final values should be confirmed for the production thickness, coating and color ordered.

What is the listed haze value?

The current test table lists haze below 0.5%. Buyers requiring a contractual optical specification should request the applicable test report for the ordered batch or approved sample.

Why does the sheet need an anti-scratch coating?

Polycarbonate has excellent impact resistance but its untreated surface can scratch more easily than glass. A hard coating improves abrasion resistance during cleaning, ball contact, installation and normal operation.

Is UV protection necessary for outdoor padel courts?

UV protection is important for outdoor polycarbonate because long-term sunlight exposure can otherwise contribute to yellowing and changes in optical or mechanical performance.

Can both sides of the polycarbonate be hard coated?

Hard-coating configuration should be confirmed according to the project. If both surfaces will be exposed to players, balls, cleaning or weather, specify the need for two-side surface protection when requesting the quotation.

Can Wallis customize the panel dimensions?

Yes. Wallis lists standard sizes including 1020 × 2040 mm, 1220 × 2440 mm, 1995 × 1995 mm and 1995 × 2495 mm, with custom dimensions available according to production feasibility.

Can the PC sheet be drilled or CNC machined?

Yes, polycarbonate can be machined with suitable tools and processing parameters. For padel projects, provide the exact hole diameter, position and edge distance because fastening geometry affects structural performance.

Does the panel need space for thermal expansion?

Yes. Polycarbonate changes dimensions with temperature. The mounting system should provide appropriate clearance and should not clamp the sheet so tightly that thermal movement creates excessive stress.

Can 12mm PC sheet withstand ball impact and player contact?

Polycarbonate has high impact resistance, but the performance of a padel wall depends on the complete panel-and-frame assembly. Panel size, support spacing, fixing design and repeated load conditions must be evaluated for the actual court.

Will polycarbonate have the same ball rebound as glass?

Not automatically. Polycarbonate has different stiffness characteristics from glass. The complete wall system must be designed and tested to achieve the required rebound behavior for the intended padel application.

Can the sheet be used in heavy rain and outdoor weather?

The UV-resistant hard-coated grade is intended for outdoor applications, but the complete installation must also account for wind load, drainage, thermal movement, fastening and the climate at the project location.

Is the anti-scratch coating completely scratch-proof?

No surface should be described as completely scratch-proof. The hard coating significantly improves scratch and abrasion resistance compared with untreated PC, but abrasive tools, sand, aggressive cleaning or sharp objects can still damage the surface.

How should hard-coated polycarbonate panels be cleaned?

Use soft non-abrasive cleaning materials and cleaners confirmed as compatible with polycarbonate and the hard coating. Avoid abrasive pads and unverified aggressive solvents.

Can Wallis provide samples before bulk production?

Yes. Sample evaluation is recommended for checking optical clarity, coating quality, scratch resistance, machining behavior and compatibility with the customer's padel court design before bulk production.

What information should I provide for a quotation?

Provide the required thickness, finished panel dimensions, quantity, hole layout, frame drawing, coating-side requirement, outdoor climate, applicable court standard and any optical or structural requirements.

Request 12mm Padel Court Polycarbonate Sheet Samples

Looking for a 12mm hard-coated polycarbonate sheet supplier for padel courts? Wallis provides UV-resistant anti-scratch PC panels, custom sizes and project-based processing for court manufacturers, sports-facility contractors and transparent safety-glazing suppliers.

Send your panel drawing, thickness, quantity, hole layout, coating requirement and target market to receive a suitable material recommendation, sample and factory quotation.