|
PC Sheet we gɛt di taytul
| Kɔlɔ: | |
|---|---|
| Sayz: | |
| Matirial: | |
| Kwantiti: | |
Wallis transparent polycarbonate strong coated overlay film na divεlכp fכ profeshכnal kad manifakta dεm we nid hεy optik klari, rili lamination bonding, impak rεsistεns, εn lכng tεm surface protεkshכn. Di klia PC ɔvlay de aplay to print kad layers durin thermal lamination fɔ protɛkt grafik, pɔsin data, sikyɔriti ɛlimɛnt, chips, ɛn ɛmbaded kad strɔkchɔ.
Di sayd we dɛn kɔt strɔng, dɛn mek am fɔ mek di adheshon bɛtɛ usay di say dɛn we dɛn print, spɛshal ink dɛn, ɔ kɔmpleks kad kɔnstrɔkshɔn dɛn de mek di bonding mɔ dimand. I fayn fɔ gɔvmɛnt ID kad, drayva laysens, akses kad, wokman kad, smart kad, bank kad, mɛmbaship kad, ɛn ɔda aydentifikeshɔn dɔkyumɛnt dɛn we go de te.
B2B saplae opshɔn dɛn: kɔstɔmayz tik, A4/A3 ɔ spɛshal shit saiz, sɔfayz finish, kɔtin trɛnk, laserable ɔ nɔ-laserable gred, pak, lɛbl, ɛn sampul tɛst.
| Sɔntin | Transparent polycarbonate strɔng kɔt ɔvlay film |
| Tin dɛn | PC / Polikabɔnɛt |
| Kɔlɔ | Klia; kɔstɔmayz opshɔn dɛn we de ɔnda di prɔjek ɛvalueshɔn |
| Tik we i tik | Customized akɔdin to kad kɔnstrɔkshɔn; kɔmɔn kad-ɔvlay rikwaymɛnt dɛn kin inklud 0.05mm, 0.08mm, ɛn 0.10mm |
| Sayz fɔ di Shit | A4, A3, ɛn dimɛnshɔn dɛn we dɛn kɔstɔmayt |
| Tayp fɔ Kɔtin | Strɔng bonding kɔtin fɔ kad lamination |
| Di Opshɔn dɛn fɔ di Surface | Glos, mat, fayn mat, velvet, ɔ kɔstɔmayz sɔfays we yu gɛt if yu gɛt am |
| Fɔnshɔnal Gret dɛn | Strɔng kɔt, laserable, nɔ-laserable, printable, ɛn kɔstɔmayz kad-ɔvlay gred dɛn |
| Men Prɔpati dɛn | Ay klia, impak rɛsistɛns, dimɛnshɔnal stebiliti, abrashɔn protɛkshɔn, ɛn rili laminɛshɔn pefɔmɛns |
| Aplikeshɔn dɛn | ID kad, drayva laysens, akses kad, smart kad, bank kad, wokman kad, ɛn sikyɔriti aydentifikeshɔn dɔkyumɛnt dɛn |
| Fɔmat fɔ di Sapɔt | Kɔt sheet ɔ kɔstɔmayz sapɔt fɔmat akɔdin to ɔda rikwaymɛnt dɛn |
| Kastamayzeshɔn | Tik, saiz, sɔfa, kɔtin, pak, lɛbl, ɛn tɛst-spɛsifi k prɔjɛkt |
Faynal spɛsifikɛshɔn dɛn fɔ kɔnfɔm tru di aprɔv tɛknikal data shit ɛn prodakshɔn sampul. Aktual bonding pefomans dipen pan di kad kor, ink, kotin, lamination temperechur, prɛshɔn, saykl tɛm, ɛn kol prɔses.
Strɔng kɔt polikabɔnɛt ɔvlay film na transparent PC film wit spɛshal pripia fɔ bonin sɔfays. We dɛn de lamin di kad, i kin bi di protɛktiv ɔda layt na di kad ɛn i kin ɛp fɔ bon di kad layt dɛn we dɛn print fɔ mek dɛn bi wan stebul mɔlti-layer kɔnstrɔkshɔn.
Polikabɔnɛt de gi di mɛkanikal trɛnk, ɔt rɛsistɛns, optik klia, ɛn dimɛnshɔnal stebiliti we di kad kɔnstrɔkshɔn dɛn we de te go nid. Di strɔng kɔtin de mek i kɔmpitabl wit di say dɛn we dɛn print ɛn i de ɛp fɔ ridyus di delamination we dɛn yuz di kɔrɛkt matirial gred ɛn lamination prɔses.
Transparent PC Ɔvlay Film
Strɔng Kɔt Laminɛshɔn Surface
Print ink kin mek wan barɛri bitwin di transparent ɔvlay ɛn di kad kɔr. Wan strɔng-kɔt sɔfays na fɔ impɔtant intalay adheshon ɛn gi wan wayda bonding margin fɔ dimand print kɔnstrɔkshɔn dɛn.
We di kɔtin mach kɔrɛkt wan wit di ink, kɔr matirial, ɛn lamineshɔn paramita, i kin ɛp fɔ ridyus di edj liftin, bɔbul, wik bonding, ɛn separeshɔn bitwin di ɔvlay ɛn print layers.
Strɔng bonding de sɔpɔt di strɔkchɔral intɛgriti fɔ kad dɛn we gɛt bɔku print layers, ɛntena, chips, transparent winda, sikyɔriti ɛlimɛnt, ɔ spɛshal kɔr fim dɛn.
Difrɛn kɔtin dɛn kin evalyu akɔdin to di pɔsin we bay in printin prɔses, ink kemistri, lamination ikwipmɛnt, kad strɔkchɔ, target peel trɛnk, ɛn finish-kad pefɔmɛns rikwaymɛnt.
Di transparent PC film de alaw fɔ print foto dɛn, tɛks, barɔd, pɔtn, logo, ɛn sikyɔriti grafik dɛn fɔ de klia wan afta dɛn dɔn lamin. Dɛn kin tɔk bɔt di tin dɛn we dɛn nid fɔ dɔn di surface ɛn di haze akɔdin to di we aw dɛn mek di kad.
Dɛn kin pik polikabɔnɛt fɔ kad aplikeshɔn dɛn we nid fɔ taf ɛn nɔ krak, bɛn, impak, ɛn fɔ ol am ɔltɛm.
As di ɛksternal kad layt, di ɔvlay de protɛkt di infɔmeshɔn we dɛn print frɔm rutin frikshɔn, skrach, dɔti, mɔstɔ, ɛn kɔntakt ripit we dɛn de yuz di kad nɔmal.
Suitabl PC ɔvlay gred dɛn de gi stebul dimɛnshɔnal pefɔmɛns ɔnda kɔntrol ɔt ɛn prɛshɔn, ɛp kad manifakta dɛn fɔ manej alaynɛshɔn, flatnɛs, layt rɛjista, ɛn finish-kad kɔnsistɛns.
Polikabɔnɛt kad kɔnstrɔkshɔn kin sɔpɔt lɛsa pɔsnalayzeshɔn, transparent winda, taktil ficha, ɛmbaded sikyɔriti grafik, ɔlografik ɛlimɛnt, ɛn ɔda anti-kɔntɛfɛt tɛnkɔlɔji dɛn we dɛn pik di rayt fim gred ɛn prodakshɔn prɔses.
Tiknes, surface texture, gloss level, coating strength, sheet size, ɛn functional gred kin ajɔst fɔ mach difrɛn kad strɔkchɔ ɛn pɔsnalayzeshɔn rikwaymɛnt.
Transparent PC ɔvlay fayn fɔ nashɔnal ID kad, rɛzidɛnt kad, vota kad, soshal sikyɔriti kad, ɛn ɔda gɔvmɛnt aydentifikeshɔn dɔkyumɛnt dɛn we nid fɔ de ɛn sikyuɔr pɔsnalayzeshɔn.
Bɔku tɛm, dɛn kin yuz drayva laysens ɛn bɔku tɛm dɛn kin gɛt lɔng tɛm fɔ wok. Wan polikabɔnɛt ɔvlay we de te de ɛp fɔ protɛkt pɔtrɛt, pɔsin in pasɔnal data, infɔmeshɔn we mashin kin rid, ɛn sikyɔriti grafik dɛn.
Strɔng kɔt PC ɔvlay kin yuz fɔ akses kɔntrol kad, wokman badge, kampus kad, fasiliti kredibiliti, ɛn aydentifikeshɔn kad we dɛn kin put insay ripit, swip, ɔ handel ɛvride.
Di ɔvlay kin bi pat pan wan smat kad we gɛt bɔku layt dɛn we gɛt ɛntena, chip mɔdyul, layt dɛn we dɛn print, ɛn ɔda tin dɛn fɔ mek sikyɔriti. Kad strɔkchɔ ɛn lamination kɔndishɔn dɛn fɔ validet bifo mas prodakshɔn.
Dɛn kin ebul fɔ evalyu di kɔstɔmayt PC ɔvlay fɔ di kad dɛn we go de te fɔ bank, pemɛnt, faynɛns, ɔ ɔthɛntishɔn usay dɛn dɔn kɔnfyus di matirial kɔnstrɔkshɔn we dɛn nid ɛn di kad standad dɛn we dɛn kin yuz.
Prɛmiɔm mɛmbaship, lɔyalti, ɔspitul, transpɔt, wɛlbɔdi biznɛs, ɛn savis kad kin yuz PC ɔvlay we dɛn nid fɔ gɛt lɔng savis layf ɛn mɔ strɔng kɔnstrɔkshɔn.
Kad Ɔvlay Matirial Opshɔn dɛn
Polikarbonɛt Kad Matirial
di layεr dεm we dεn laminεt fayn fayn wan fכm wan tayt intagreted kad bכdi. If yu tray fɔ separet ɔ chenj di layt dɛn we de insay kin mek yu si damej, ɛn dis kin mek i nɔ izi fɔ mek yu chenj di tin dɛn we yu nɔ alaw.
Di ɔvlay de protɛkt pɔsin in infɔmeshɔn we dɛn print ɔ we dɛn dɔn ɛmbas frɔm abrashɔn ɛn aw fɔ ol am ɔltɛm. Laserable gred kin alaw bak fɔ mek pɔsnalayz data insay di polycarbonate strɔkchɔ pas fɔ jɔs de na di surface.
Dipen pan di kad dizayn ɛn prodakshɔn kapasiti, PC strɔkchɔ dɛn kin inkɔrpɔret transparent winda, laser imej, taktil engravin, UV-visible ficha dɛn, ɔlografik kɔmpɔnɛnt dɛn, maykrotɛks, giloch patɛn, ɛn ɛmbaded ilɛktronik ɛlimɛnt dɛn.
Sekyuriti ɛlimɛnt dɛn na prɔjek-spɛsifi k ɛn dɛn nɔ de ɔtomɛtik wan insay ɛvri standad transparent ɔvlay fim. Duya gi di sikyɔriti fɛns we yu nid we yu de aks fɔ kot.
| Selekshɔn Faktɔ | Polikabɔnɛt Ɔvlay | PVC Ɔvlay | PETG Ɔvlay |
|---|---|---|---|
| Tipik Pozishɔn | Ay-durabiliti ɛn sikyɔriti-dɔkyumɛnt aplikeshɔn dɛn | Standart kɔmɛshɔnal ɛn jenɛral-pɔpɔz plastic kad dɛn | Durable kɔmɛshɔn ɛn kɔmpɔzit kad kɔnstrɔkshɔn dɛn |
| Mekanikal Strɔng | High toughness ɛn impak rɛsistɛns | I fayn fɔ yuz kɔmɔn kad dɛn | Gud taf ɛn fleksibiliti |
| Laser Pɔsnalayzeshɔn | Available wit aprɔpriet laserable PC gred | Limitɛd ɛn dipen pan gred | Na wit spɛshal gred dɛn nɔmɔ we fit am |
| Di we aw dɛn de du di wok | Rikways wan PC-kɔmpatibl lamination prɔses | Kɔmɔn fɔ yuz insay kɔvɛnshɔnal kad lamination | Rikways kɔmpitabl tɛmpracha ɛn layt dizayn |
| Di Rikɔmɛnd fɔ Yuz am | ID dɔkyumɛnt, drayva laysens, sikrit smart kad, ɛn kad dɛn we go de fɔ lɔng tɛm | Membaship, loyalti, gift, akses, ɛn jenɛral ID kad | Durable akses, kɔmɛshɔn, ɛn kɔstɔmayt kɔmpɔzit kad dɛn |
Di matirial we fit pas ɔl dipen pan di kad layf we dɛn nid, sikyɔriti lɛvɛl, lamination ikwipmɛnt, kad-bɔdi matirial, pɔsnalayzeshɔn we, badjɛt, ɛn di tɛknikal standad we dɛn nid.
Spɛsifik ɛvri layt, inklud di transparent ɔvlay, print PC kɔr, wayt kɔr, chip, ɛntena, winda, magnɛtik strɛp, ɛn target finish-kad tik.
Gi di we aw dɛn de print, di pɔsin we de gi di ink, di we aw dɛn de mɛn am, di kɔvarej fɔ print, ɛn if di ɔvlay go kɔntakt wan PC sɔfays we dɛn print ɔ we dɛn nɔ print. Dɛn ditil ya kin afɛkt di we aw dɛn kin pik di kɔtin.
Kɔnfɛm if di kad go yuz sɔfayz printin, laser engraving, taktil engraving, chip ɛnkɔdin, magnɛtik ɛnkɔdin, ɔ ɔda pɔsnalayzeshɔn prɔses.
Sheb di laminator tayp, di we aw dɛn de ɔt, di tɛmpracha rɛnj, prɛshɔn, di tɛm we dɛn de ɔt, di tɛm we dɛn de kol, di plet sɔfa, ɛn di rilis matirial we yu prodakshɔn layn de yuz.
Difayn rikwaymɛnt fɔ transparency, haz, glos, shrinkage, peel strength, flatness, surface defects, abrasion resistance, kala stebiliti, laser contrast, ɛn finished-card durability.
Test di aktual ɔvlay wit di ink we yu want, kad kɔr, ikwipmɛnt, sikyɔriti ɛlimɛnt dɛn, ɛn lamineshɔn paramita dɛn bifo yu put prodakshɔn ɔda.
Send wi yu tiknes, dimɛnshɔn, printin we, kɔtin rikwaymɛnt, lamination paramita, ɛnd aplikeshɔn, ɛn ɛstimat ɔda kwantiti.
Gɛt wan Tɛknikal RikɔmɛndishɔnKɔnsistɛns kad prodakshɔn nid mɔ pas fɔ chɛk di nominal tik. Raw matirial, film extrusion ɔ kalenda, surface treatment, coating, slitting, sheet cutting, klin, pak, ɛn stɔrɔj ɔl kin afɛkt di fainal lamination pefɔmɛns.
Matirial ɛn gred verifyeshɔn.
Tiknes ɛn dimɛnshɔnal-tɔlerans inspekshɔn.
Surface klin ɛn visual-defect inspekshɔn.
Kotin yunifomiti ɛn trit-sayd idɛntifikeshɔn.
Transperɛns, haz, glos, ɛn sɔfa-finish ɛvalueshɔn.
Tεmכl shrinkεj εn dimεnshכnal-stεbiliti tεst usay i nid.
Trayal lamination ɛn bonding-strɛngth ɛvalueshɔn.
Flatnɛs, bɔbul, wɔp, ɛn ed-bɔndin inspekshɔn.
Packaging ɛn lot-traceability verifyeshɔn.
Kip di fim insay in ɔrijinal protɛktiv pak te dɛn mek am.
Stɔ am na say we klin, dray, ɛn we di tɛmpracha kin kɔntrol.
Protɛkt di say we de ɔp frɔm dɔst, ɔyl, finga prɛnt, mɔs, ɛn skrat.
Kɔnfɛm di sayd we dɛn kɔt bifo yu stak di kad layers.
Alaw di matirial fɔ aklimatiz to di prodakshɔn ɛnvayrɔmɛnt we nid de.
Yuz di apruv lamination resipi pas fɔ aplay wan yunivasal tɛmpracha ɛn prɛshɔn.
Evaluate print kad afta komplit kol en kondishon.
Transparent PC ɔvlay sheet dɛn nid klin ɛn protɛktiv pak bikɔs dɔst, sɔfa mak, mɔstɔ, ɛn ed damej kin afɛkt finish-kad kwaliti. Yu kin kɔstɔmayz di pak akɔdin to di sheet saiz, di kwantiti we dɛn ɔda, di we aw dɛn de transpɔt, ɛn di tin dɛn we di kɔstɔma nid fɔ rayt di lɛbl.
Protektiv PE film ɔ klin insay wrap.
Pak we de na do we nɔ de mek wata.
Katon, wud kes, ɔ palletized ɛkspɔt pak.
Kɔna, ed, ɛn sɔfays protɛkshɔn.
Lebul dɛn we dɛn mek fɔ yusɛf, lɔt nɔmba dɛn, ɛn list dɛn fɔ pak tin dɛn.
PC Ovlay Film fɔ Prɔfɛshɔnal Kad Manufakchurin
Wallis de saplae plastic kad matirial to kad manifakta, sikyɔriti printa, kɔnvɔta, distribyushɔn, ɛn OEM kɔstɔma dɛn. Wi de sɔpɔt kɔstɔma dɛn fɔ pik ɔvlay tik, kɔtin tayp, shit dimɛnshɔn, sɔfays finish, ɛn rilat kɔr matirial fɔ kɔstɔmayz kad prɔjɛkt.
B2B saplai fɔ kad faktri ɛn sikyɔriti-printin prɔjek dɛn.
Tik, saiz, finish, ɛn kɔtin opshɔn dɛn we dɛn kɔstɔmayt.
Sampul sɔpɔt fɔ printin ɛn lamination ɛvalueshɔn.
Sɔpɔt fɔ PC ɔvlay, PC kɔr, laserable matirial, ɛn rilat kad layers.
Kastomayz ɛkspɔt pak, lɛbl, ɛn dɔkyumentri.
Teknik kɔmyunikeshɔn fɔ matirial ɛn prodakshɔn kɔmpitibliti.
Kɔntakt Wallis wit yu tɛknikal spɛsifikɛshɔn, kad strɔkchɔ, sampul rikwaymɛnt, ɛstimat kwantiti, ɛn usay yu de go. Wi tim go evalyu wan fayn polycarbonate ɔvlay sɔlvishɔn fɔ yu prɔjek.
Rikwest Prayz ɛn Sampul dɛnNa klia polycarbonate film wit bonding tritmɛnt ɔ kɔtin we dɛn mek fɔ kad lamination. I de protɛkt di kad layers we dɛn print ɛn ɛp fɔ mek wan kad strɔkchɔ we gɛt bɔku layers we go de te.
Di strɔng kɔtin de mek di adheshon bitwin di PC ɔvlay ɛn di print kad layers. I fayn usay ink kɔba, spɛshal printin, ɔ kɔmpleks kad kɔnstrɔkshɔn de mek i nɔ izi fɔ mek dɛn jɔyn dairekt wan.
Tiknɛs kin kɔstɔmayt akɔdin to di kad dizayn. Di kɔmɔn prɔjek rikwaymɛnt dɛn kin inklud 0.05mm, 0.08mm, ɛn 0.10mm, bɔt di las tik fɔ pik akɔdin to di ful layt strɔkchɔ ɛn target finish-kad tik.
Yɛs. A4, A3, ɛn kɔstɔmayz sheet dimɛnshɔn dɛn kin tɔk bɔt akɔdin to di bayer in printin layout, lamination plet, kɔt fɔmat, ɛn prodakshɔn volyum.
Standard strong-coated transparent film nɔ kin rili bi lɛsa. Wan dediket laser-riaktiv polycarbonate gred fɔ pik we laser engraving, greyskayl pɔtrɛt, taktil data, ɔ intanɛnt pɔsnalayzeshɔn nid fɔ de.
Nɔ, ɔlogram, UV-visible patɛns, maykrotɛks, optik-variable ɛlimɛnt, ɛn di sem kayn sikyɔriti ficha dɛn nid sɛpret projɛkt dizayn, kɔmpitabl matirial, ɛn spɛshal prodakshɔn prɔses.
Dɛn nɔ go ebul fɔ tek am se i go kɔmpit fɔ ɛvri ink. Di wan dɛn we de bay fɔ gi di printin prɔses, di kayn ink, di we aw dɛn de mɛn am, ɛn di sɛmpul dɛn we dɛn print so dat dɛn go ebul fɔ tɛst di bonding ɛn lamination pefɔmɛns.
Miks-matirial kad strɔkchɔ kin pɔsibul, bɔt difrɛns pan sɔftin tɛmpracha, shrinkage, bonding bihayvya, ɛn dimɛnshɔnal stebiliti fɔ ɛvaluet. Sampul ɛn payɔl tɛst nid fɔ de bifo mas prodakshɔn.
Duya gi di matirial gred, tiknes, sheet saiz, surface finish, koting rikwaym, printin we, kad strɔkchɔ, aplikeshɔn, pɔsnalayzeshɔn prɔses, ɛstimat kwantiti, pak rikwaymɛnt, ɛn delivri dɛstineshɔn.
Yɛs. I fayn fɔ mek dɛn du sampul tɛst so dat di pɔsin we bay go ebul fɔ chɛk if i transparency, di kɔtin kɔmpitibliti, lamination bonding, flatnɛs, surface appearance, cutting, personalization, ɛn finished-card performance.
Polikabɔnɛt matirial kin bi risaykul tru fayn kɔlɛkshɔn ɛn prɔsesin sistɛm dɛn. Bɔt di risaykul we dɛn kin yuz fɔ mek kad we dɔn dɔn, kin dipen pan di tin dɛn we dɛn kin kɔt, ink, adeziv, chip, ɛntena, sikyɔriti kɔmpɔnɛnt dɛn, lokal infrastukchɔ, ɛn di tin dɛn we dɛn nid fɔ du fɔ mɛn di dɔti.
