|
Kastom 0.05–0.25mm polycarbonate laserable overlay film fɔ sikyuɔr ID, drayva laysens, paspɔt ɛn smat kad prodakshɔn. Klia ɔ mat shit, OEM saiz, finish ɛn ɛkspɔt pak de.
WLS-PC Ɔvlay
WALLIS
| Kɔlɔ: | |
|---|---|
| Tik : | |
| Laserable tayp: | |
| Kwantiti: | |
Wallis polycarbonate PC laserable overlay film na injinia fɔ di wan dɛn we de mek gɔvmɛnt ID kad, drayva laysens, rɛzidɛnt kad, smat akses kad, bank kad, paspɔt data pej, ɛn ɔda lɔng layf sikyɔriti dɔkyumɛnt dɛn. Di transparent ɔ mat film de bi di protɛktiv ɔda layt fɔ wan laminated PC kad we i de sɔpɔt pɔrmanent lɛsa pɔsnalayzeshɔn insay di kad strɔkchɔ.
Available in tiknes frɔm 0.05mm to 0.25mm , di ɔvlay kin saplae insay A4, A3, ɛn kɔstɔmayz shit fɔmat. Difrɛn laser-riaktiv gred, sɔfayz tɛkstɔr, kɔtin, ɛn kad-layer kɔnfigyushɔn dɛn kin evalyu akɔdin to di kɔstɔma in laser sistɛm, lamination prɔses, dɔkyumɛnt layfspan, ɛn sikyɔriti rikwaymɛnt.
Nid wan PC ɔvlay we mach to yu laser, kad kɔnstrɔkshɔn, ɛn lamination prɔses?
Rikwest Sampl ɛn wan Tɛknikal Kɔt| Sɔntin | Polycarbonate laserable ovalay film fɔ sikyuɔr kad lamination |
| Tiknɛs Rɛnj | 0,05mm–0,25mm, ɛn di ɔda wan dɛn; kɔstɔmayz tiknɛs we de ɔnda tɛknikal kɔnfɔmeshɔn |
| Fɔmat fɔ di Sapɔt | A4, A3, kɔstɔmayz sheet, ɔ prɔjek-spɛsifi k fɔmat |
| Di Opshɔn dɛn fɔ di Surface | Transparent, mat, fayn mat, velvet-tɛkstɔr, kɔt, ɛn kɔstɔmayz finish |
| Praymari Fɔnkshɔn | Pɛrmanɛnt laser pɔsnalayzeshɔn, print-layer protɛkshɔn, durable kad kɔnstrɔkshɔn, ɛn tamper-evident lamination |
| Tipik Baya dɛn | Di wan dɛn we de mek sikyɔriti dɔkyumɛnt, di wan dɛn we de mek kad, di wan dɛn we de mek pɔsin in yon, di wan dɛn we de mek gɔvmɛnt program, ɛn di wan dɛn we de sheb di kad matirial |
Laser-reactive PC overlay na fɔmulayt fɔ jenarayz wan visible mak we dɛn prosɛs am bay wan kɔmpitabl laser pɔsnalayzeshɔn sistem. Dɛn kin mek difrɛn data lɛk pɔtrɛt, nem, aydentifikeshɔn nɔmba, sayn, barɔd, ɛn sikyɔriti grafik insay di polikabɔnɛt layt pas fɔ print am nɔmɔ na di say we de na do.
Durin kad lamination, kompitibul polycarbonate layers de fiuz anda kontrכl tεmprachכ εn prεshכn. Di rizultant multilayer kad bɔdi at fɔ separet witout visible damej, ɛp fɔ protɛkt ɔl tu di fizik pɔsnalayzeshɔn data ɛn ɛmbaded ilɛktronik kɔmpɔnɛnt dɛn. Faynal pefɔmɛns dipen pan di kɔmplit kad kɔnstrɔkshɔn, fim gred, lɛsa sɛtin, ɛn lamineshɔn paramita dɛn.
| Tin dɛn | Polikabɔnɛt (PC) . |
| Tik we i tik | 0,05mm–0,25mm, di wan dɛn we de wok |
| Tiknɛs dɛn we Kɔmɔn | 0,05mm, 0.07mm, 0.08mm, 0.10mm, 0.15mm, 0.20mm, ɛn 0.25mm; avaylabl we dɛn kɔnfyus bay ɔda spɛsifikɛshɔn |
| Sayz fɔ di Shit | A4, A3, ɛn dimɛnshɔn dɛn we dɛn kɔstɔmayt |
| Laser Gred we dɛn kin yuz | Laserable ɔ nɔ-laserable protɛktiv gred |
| Ɔvlay Variant dɛn | Laserable ɔvlay, kot ɔvlay, strɔng kɔt ɔvlay, ɛn kɔstɔmayz kad ɔvlay strɔkchɔ |
| Magnɛtik Strayp Opshɔn dɛn | Opshɔnal magnɛtik kɔt ɔvlay kɔnfigyushɔn dɛn: HiCo, LoCo, 300 Oe, 600 Oe, 2750 Oe, ɛn 3000 Oe, we dɛn kɔnfyus fɔ di prɔjek |
| Surface Finish na di wɔl | Klia, mat, fayn mat, velvet, anti-glare, ɔ kɔstɔmayt tɛkstɔr |
| Kɔlɔ | Klia; ɔda kɔnstrɔkshɔn dɛn we de afta dɛn dɔn ɛvaluet |
| Aplikeshɔn dɛn | Nashɔnal ID kad, drayva laysens, paspɔt data pej, rɛsɛdant kad, bank kad, smart kad, ɛn sikyɔriti akses kredibiliti |
Teknikal not: Faynal tolerans, laser kɔntrast, haz, surface texture, bonding pefɔmans, ɛn prɔsesin winda fɔ kɔnfɔm tru sampul ɛn prodakshɔn-layn tɛst bifo bulk aprɔval.
Wallis de sɔpɔt kad manifakta dɛn wit kɔstɔmayz film tiknɛs, shit dimɛnshɔn, sɔfayz tritmɛnt, kɔtin strɔkchɔ, pak, ɛn batch saplai. Fɔ sikyɔriti dɔkyumɛnt projɛkt, dɛn kin pripia sɛmpul fɔ laser kɔntrast, lamination, print kɔmpatibiliti, dimɛnshɔnal stebiliti, ɛn finish-kad ɛvalueshɔn bifo kɔmɛshɔnal prodakshɔn.
PC Film Prodakshɔn
Stebul Batch Saplai
Kwaliti Inspekshɔn
Wan kɔmpitabl laser-riaktiv gred de mek dɛn ebul fɔ mek pɔrmɛnt greyskayl pɔtrɛt, tɛks, nɔmba, sayn, ɛn ɛlimɛnt dɛn we mashin kin rid insay di kad layt. Intanɛt pɔsnalayzeshɔn at fɔ chenj pas di infɔmeshɔn we dɛn de yuz nɔmɔ na di kad we de na do.
Polycarbonate layers kin fכm wan strכng fכs kad bכdi כnda aprכpriet lamination kכndishכn dεm. If yu tray fɔ opin ɔ separet di dɔkyumɛnt, dat kin mek yu gɛt damej we pɔsin kin si we nɔ go ɛva chenj, we kin sɔpɔt layt anti-kɔntɛfɛt strateji fɔ gɔvmɛnt ɛn institiushɔnal kredibiliti.
Transparent ɔvlay de mek pɔsin ebul fɔ si di pikchɔ dɛn, di art wok dɛn we dɛn print, maykrotɛks, sikyɔriti bakgrɔn, ɛn transparent-window strɔkchɔ dɛn. Mat ɛn tɛkstɔr opshɔn dɛn kin ridyus glare, impruv fɔ handle, ɛn mek wan kɔntrol pɔshɔnal apia.
PC film de gi strɔng impak rɛsistɛns, dimɛnshɔnal stebiliti, ɛn ɔt rɛsistɛns fɔ kad dɛn we dɛn de ɛkspos to frɛkuɛnt handlin. Finished-kad rɛsistɛns to abrashɔn, kemikal, mɔstɔ, UV ɛksplɔshɔn, bɛnd, ɛn tɛmpracha saykl fɔ verify agens di intended dɔkyumɛnt spɛsifikɛshɔn.
Di ɔvlay kin inkɔrpɔret insay sikyɔriti-dɔkyumɛnt kɔnstrɔkshɔn dɛn we gɛt chips, ɛntena, print sikyɔriti patɛn, transparent winda, ɔlografik ɛlimɛnt dɛn, taktil ficha dɛn, ɛn bɔku laser-pɔsɔnalayz data layers. Kɔmpatibiliti fɔ establish na di kɔmplit-kad lɛvɛl.
| Tiknɛs | Tipik Sɛlɛkshɔn Lɔjik | Ɛnjinia Chɛk |
|---|---|---|
| 0,05–0,08mm | Tin ɔvlay ɔ intamɛdiet laser layt fɔ spɛs-limited multilayer kɔnstrɔkshɔn | Laser kɔntrast, handling, layt pozishɔn, ɛn totɛl kad tik |
| 0,10mm na di wan | Kɔmɔn balans fɔ protɛkshɔn, pɔsnalayzeshɔn dip, ɛn kad-bil fleksibiliti | Lamination winda, imej kwaliti, ɛn finish-kad flatnɛs |
| 0,15–0,20 mm | Strɔng ɔda layt fɔ dɔkyumɛnt dɛn we nid fɔ mek dɛn gɛt mɔ mɛkanikal protɛkshɔn | Tɔtɔl stak dizayn, chip ɔ ɛntena prɛshɔn, ɛn saykl kɔndishɔn |
| 0,25mm we yu de yuz | Hevi ɔvlay ɔ strɔkchɔral layt fɔ spɛshal lɔng-layf kad kɔnstrɔkshɔn dɛn | Laminator kapabiliti, kol, warpej, ɛn kɔmplians wit fayn kad dimɛnshɔn |
Dis na gaydlayn fɔ pik pɔsin pas fɔ bi fiks aplikeshɔn lɔ dɛn. Dɛn fɔ no di kɔrɛkt tik frɔm di wan ol kad stak ɛn validet am pan di kɔstɔma in ikwipmɛnt.
Dɛn kin pik klia ɔvlay we yu nid fɔ si di dizayn we dɛn print, di foto, sikyɔriti bakgrɔn, ɔ transparent-windo eria. Optik pefomans fɔ asɛs afta lamination bikɔs haze ɛn klia wan de inflɔws bay di kɔmplit matirial stak ɛn prɔses.
Mat, fayn-mat, ɔ velvet-stayl sɔfays kin ridyus di glare ɛn finga prɛnt we pɔsin kin si pan ɔl we i kin mek pɔsin ebul fɔ tɔch am we dɛn kin kɔntrol. Surface texture fɔ mach bak to printin, laser ridabiliti, lamination plet, ɛn daunstrim kad handel.
PC ɔvlay de sɔpɔt kad bɔdi dɛn we go de te, pɔsin in pasɔnal data we dɛn rayt insay, chip intagreshɔn, ɛn layt sikyɔriti ficha dɛn fɔ nashɔnal ID, rɛsɛdant, soshal sikyɔriti, ɛn pɔblik-savis kredibiliti program dɛn.
Drayva laysens nid fɔ rid fɔ lɔng tɛm ɔnda we dɛn de handle am ɔltɛm. Laserable PC overlay de ɛp fɔ protɛkt pɔtrɛt, vayriɔbul data, barkɔd, ɛn sikyɔriti artwok we i de sɔpɔt wan tamper-evident kad strɔkchɔ.
Polikabɔnɛt fim kin yuz insay rigid paspɔt data pej ɛn bɔda-krɔs kredibiliti we de kam togɛda fɔ pɔrmɛnt lɛsa pɔsnalayzeshɔn, ɛmbaded ilɛktroniks, transparent winda, ɛn bɔku ɔv ɔ kɔvat sikyɔriti ficha dɛn.
Sikyu akses kad, faynɛns kredibiliti, wokman badge, wɛlbɔdi kad, ɛn ay-valyu mɛmbaship kad kin yuz PC ɔvlay we lɔng savis layf, intanɛnt pɔsnalayzeshɔn, ɛn fɔ mek dɛn nɔ chenj di bɔdi na di tin dɛn we dɛn fɔ pe atɛnshɔn pan.
Prɛmiɔm ɛn Instityushɔnal Kad dɛn
ID, Akses, ɛn Smat Kad dɛn
| Sɛlɛkshɔn Fakta | PC Ɔvlay | PETG Ɔvlay | PVC Ɔvlay |
|---|---|---|---|
| Tipik Pozishɔn | Dokumɛnt dɛn we gɛt ay sikyɔriti ɛn we go de fɔ lɔng tɛm | Durable kad lamination ɛn kɔmpɔzit strɔkchɔ dɛn | Jɛnɛral-pɔpɔs plastic kad prodakshɔn |
| Laser Pɔsnalayzeshɔn | Available in dediket laser-riaktiv gred dɛn | Dipen pan spɛshal gred ɛn kɔnstrɔkshɔn | Nɔto di standad chuk fɔ intanɛnt PC-stayl laser engraving |
| Hɛt ɛn Dimɛnshɔnal Pɔfɔmɛnshɔn | Suitabl fɔ dimand PC kad lamination strɔkchɔ dɛn | I fayn fɔ lɔwa-tɛmpracha ɔ kɔmpɔzit kad strɔkchɔ dɛn | Kɔmɔn fɔ prosɛs insay standad PVC kad prodakshɔn |
| Di Bɛst Choice We | Sekyuriti, dɔkyumɛnt intɛgriti, ɛn lɔng tɛm durabiliti de lid di spesifikeshɔn | Klari, taf, ɛn prɔsesin fleksibiliti fɔ balans | Kost-efyushɔn, kɔmɔn kad prodakshɔn na di prɔyoritɛt |
Di matirial we dɛn fɔ pik fɔ bi bay di spɛsifikɛshɔn we dɛn dɔn dɔn fɔ di dɔkyumɛnt pas wan prɔpati nɔmɔ. Wallis kin rivyu di kad stak, pɔsnalayzeshɔn we, target savis layf, ɛn prodakshɔn ikwipmɛnt bifo i rɛkɔmɛnd wan gred.
| Stej | Wetin fɔ Verifay |
|---|---|
| 1. Rivyu bɔt di tin dɛn we dɛn de yuz | Tik, dimɛnshɔn, sɔfays tɛkstɔr, optik apinans, pak, ɛn lɔt aydentifikeshɔn |
| 2. Laser Trial we dɛn kin du | Pɔtrɛt kɔntrast, fayn tɛks, greyskel rɛnj, barkɔd ridabiliti, bɔbul, diskɔlɔreshɔn, ɛn saykl tɛm |
| 3. Lamineshɔn Trayal | Bonding, flatness, shrinkage, haze, surface replication, edj kondishɔn, ɛn chip ɔ ɛntena protɛkshɔn |
| 4. Finish-Kad Tɛst | Abrashɔn, bɛnd, kemikal, tɛmpracha sayklɔs, humiditi, UV ɛksplɔshɔn, tamper ɛvidɛns, ɛn pɔsnalayzeshɔn durabiliti |
| 5. Golden Sampul Aprɔval | Apruv di gred, kad stak, prɔses paramita, vijual standad, ɛn pak bifo bɔlk prodakshɔn |
Dɛn kin pak di PC ɔvlay shit dɛn fɔ ridyus di kɔntaminɛshɔn, mɔstɔ ɛksplɔshɔn, bɛnd, prɛshɔn mak, ɛn sɔfays skrat we dɛn de stɔrɔj ɛn intanashɔnal transpɔt. Di pak kin inklud protɛktiv PE film, mɔstɔ-rɛsistant wrap, katon ɔ palet, kɔna protɛkshɔn, lɛbl, ɛn kɔstɔmayz ɛkspɔt mak akɔdin to ɔda saiz ɛn shiping we.
Protekt Palet Lod we dɛn de lod
Ekspɔt Kɔntinɛnt Protɛkshɔn
Di manifakta sɔpɔt fɔ PC, PETG, PVC, magnɛtik strɛp, ɔlografik, ɛn ɔda kad-layer matirial dɛn.
Tiknɛs, dimɛnshɔn, sɔfays tɛkstɔr, kɔtin, pak, ɛn lɛbl.
Sampul fɔ laser, lamination, printin, ɛn finish-kad kwalifayeshɔn.
Batch saplae ɛn ɛkspɔt pak fɔ kad manifakta ɛn matirial distribyushɔn.
Teknik kɔmyunikeshɔn bays pan di kɔstɔma in kad stak, laser sɔs, laminatɔ, ɛn target pefɔmɛns.
Wan-stɔp sɔs sɔpɔt fɔ sikyuɔr kad kɔr shit, ɔvlay, inlay, ɛn rilat kad matirial.
Prɔfɛshɔnal Projɛkt Sɔpɔt
Globɛl B2B Kɔprɛshɔn
Manufakchurin ɛn Ɛkspɔt Sapɔt
Fɔ rɛkɔmɛnd di kɔrɛkt PC laserable ɔvlay ɛn pripia wan yusful kot, duya gi bɔku pan dɛn ditil dɛn ya as yu ebul:
Tik we dɛn nid, sheet saiz, kwantiti, ɛn fɔkɔs ɛvri ia.
Transparent, mat, velvet, kɔt, magnɛtik strɛp, ɔ ɔda sɔfays we dɛn nid.
Laser manifakta, laser sɔs ɔ wɛvlɛnj, ɛn di imej ɔ tɛks rizɔlt we yu want.
Komplit kad-layer strɔkchɔ, fayn kad tik, ɛn ɛmbaded chip ɔ ɛntena ditil.
Lamination ikwipmɛnt, tɛmpracha, prɛshɔn, tɛm, kol, ɛn plet finish.
Di dɔkyumɛnt layfspan we dɛn nid, tɛst standad, pak, usay dɛn de go, ɛn di tɛm we dɛn fɔ sɛn am.
Send yu spesifikeshɔn ɔ sampul we dɔn de fɔ mek di matirial mach.
Kontakt Wallis fɔ Sampul ɛn PrayzDɛn kin yuz am as layz-riaktiv ɛn protɛktiv layt insay polikabɔnɛt sikyɔriti dɔkyumɛnt dɛn, we gɛt nashɔnal ID kad, drayva laysens, paspɔt data pej, rɛzidɛnt kad, smat akses kad, ɛn ɔda kredibiliti dɛn we nid fɔ mek pɔsin in yon pɔsnalayz fɔ lɔng tɛm.
Laserable gred dεm kכntεn wan fכmyuleshכn we dεn dεn fכ mek visible kכntrast כnda kompitibl laser prכsεsin. Standard non-laserable klia ɔvlay na in dɛn kin yuz mɔ fɔ protɛkshɔn, optik klia, ɔ intamɛdiet kad layers ɛn i nɔ de gi di sem pɔsnalayzeshɔn rispɔns.
Tiknes dipen pan di totɛl kad stak, di say we di layz layt de, di las kad dimɛnshɔn, laminator kapabiliti, di durabiliti we dɛn nid, ɛn sikyɔriti dizayn. Wallis se yu fɔ tɛst sɔm tik dɛn we fit bifo yu dɔn di kɔmɛshɔnal spɛsifikɛshɔn.
Yɛs. Wan kɔmpitabl laser-riaktiv gred kin sɔpɔt greyskel pɔtrɛt, tɛks, nɔmba, sayn, ɛn sikyɔriti grafik. Kɔntrast ɛn rizɔlt dipen pan di matirial gred, laser sistem, layt pozishɔn, artwok, ɛn pɔsnalayzeshɔn sɛtin.
I kin intagret insay kɔntakt-chip ɛn kɔntaktlɛs kad kɔnstrɔkshɔn dɛn. Di kad stak, ɛntena ɔ chip pozishɔn, prɛshɔn distribyushɔn, lamineshɔn saykl, ɛn fayn ilɛktrik pefɔmɛns fɔ evalyu tru protɔtayp tɛst.
Yɛs. Yu kin tɔk bɔt transparent, mat, fayn-mat, velvet-tɛkstɔr, kɔt, ɛn kɔstɔmayz sɔfays opshɔn dɛn. Di we aw i go de dipen pan di tik, saiz, kwantiti, laser gred, ɛn di kɔmbaynshɔn we dɛn nid fɔ mek di sɔfa.
Kɔmpatibl ɔl-PC kad layers kin fiuz ɔnda kɔntrol ɔt ɛn prɛshɔn we nɔ gɛt kɔvɛnshɔnal adeziv layt. Dɛn kin pik di gred dɛn we dɛn kɔt fɔ spɛshal kɔmpɔzit strɔkchɔ dɛn. Di bonding we fɔ kɔnfyus fɔ di kɔstɔma in kɔmplit matirial stak.
Di wan dɛn we de bay fɔ evalyu di tik ɛn dimɛnshɔnal kɔnsistɛns, di say we klin, di optik kwaliti, di lɛsa kɔntrast, lamination bonding, shrinkage, wɔp, abrashɔn, kemikal rɛsistɛns, envayrɔmɛnt durabiliti, ɛn tamper ɛvidɛns pan kad dɛn we dɔn dɔn.
Yu kin kɔnfyus di sampul we de akɔdin to di tik we dɛn aks fɔ, di dimɛnshɔn, di laser gred, di finish, ɛn di kɔtin. Gi yu laser ɛn lamination ditel dɛn de ɛp Wallis fɔ pik wan mɔ rilevɛns sampul fɔ evalueshɔn.
MOQ ɛn lida tɛm dipen pan di fim gred, tiknes, saiz, sɔfays tɛkstɔr, kɔtin, pak, ɔda kwantiti, ɛn if di tin na standad ɔ kɔstɔmayz. Submit di ful spesifikeshɔn fɔ wan kɔrɛnt kot ɛn delivri plan.
Kip di sheet dɛn we dɛn sidɔm na di fɔs pak we dɛn bin pak dɛn na say we klin, dray, we dɛn kin kɔntrol di tɛmpracha, we nɔ gɛt dairekt san, dɔst, mɔstɔ, ɔt sɔs, ɛn ebi ebi prɛshɔn we dɛn kin stak. Fɔ fala di prɔjɛkt-spɛsifi k hanlin ɛn kɔndishɔn instrɔkshɔn dɛn we dɛn gi wit di matirial.
Tɔk bɔt yu sikyɔriti kad ɔvlay projɛkt wit di Wallis tɛknikal sɛl tim.
Gɛt wan Kastɔm PC Ɔvlay Sɔlwɛshɔn
