|
Wallis custom PETG cards lagolago teugatupe, ID, faletalimalo ma smart-card polokalama fa'atasi uma-PETG po'o fausaga tu'ufa'atasi, lomitusi masani, meataalo, fa'ata'ita'iga, su'ega ma sapalai B2B sa'o falegaosimea.
WLS-PETG Pepa Autu
ULIS
| Lanu: | |
|---|---|
| Tele: | |
| Aofa'i: | |
O lo'o tu'uina atu e Wallis kata fa'apitoa PETG i laupepa autu PETG ma fa'apipi'i manino fa'apipi'i mo faletupe, fai kata, kamupani fa'atonutonu avanoa, fale talimalo e tu'uina atu fofo, polokalama fa'amaoni-polokalame, tu'ufa'atasia kata-atamai ma tufatufa. Poloketi e mafai ona atiaʻe e pei ole PETG, PETG/PVC composite poʻo PETG smart-card structures e tusa ai ma le lomitusi, lamination, umi, faʻapitoa ma faʻaauau manaʻoga.
O le fa'atinoga o pepa PETG e fa'alagolago i le fau atoa ae le o le laupepa autu. Autu mafiafia, ufiufi manino, vaitusi lolomi, RFID inlay, pusi faʻafesoʻotaʻi, taʻavale mageta, faʻapipiʻi, lamination cycle, malulu ma maeʻa-card mafiafia e tatau ona faʻamaonia o se tasi faiga. E lagolagoina e Wallis kata faʻataʻitaʻiga ma faʻataʻitaʻiga meafaitino aʻo leʻi gaosia tele.
E le tatau ona maketiina le PETG i faʻamatalaga e le lagolagoina e pei o le 'autometi toe faʻaaogaina', 'faʻaititia pea le kaponi', 'faʻafouina', 'UV-proof' poʻo le sili atu nai lo le PVC i soʻo se talosaga. E tatau ona faʻamaonia pe faʻaaogaina e le poloketi le PETG, faʻamaonia PETG toe faʻaaogaina, o se fausaga atoa-PETG ma le PETG faʻapipiʻi o loʻo i ai se auala faʻapipiʻi PETG poʻo se auala faʻapitoa. maketi.
| Tulaga Oloa | Peti PETG ua mae'a aganu'u fa'atasi ai ma le PETG autu, lomitusi ma fa'apipi'i fofo meafaitino |
| Filifiliga Faufale | pepa PETG uma, PETG/PVC pepa tu'ufa'atasi, PETG RFID card, PETG contact-chip card po'o PETG magnetic-stripe card |
| Uluai Pepa Lapopoa | 295 × 365mm, 480 × 590mm ma lapopoa gaosiga faʻapitoa |
| Mea Mafiafia Va'aiga | 65-400μm e tusa ai ma galuega fa'avae ma vasega; ua mae'a-Kati mafiafia e fa'atatau i le poloketi |
| Lomitusi ma Fa'amae'aina | Offset, silk screen, UV numera, faʻafeiloaʻi vevela, toe faʻafeiloaʻi ma faʻapitoa-faʻapitoa faʻapitoa pe a uma ona faʻamaonia |
| Talosaga masani | Faletupe, ID, avanoa, ki faletalimalo, sui auai, faamaoni, meaalofa, felauaiga, lotoa ma kata RFID |
| B2B Auaunaga | Fa'ata'ita'iga meafaitino, kata fa'ata'ita'i, fa'ata'ita'iga, fa'ata'ita'iga lomitusi, su'ega lamination, fa'ailoga, fa'amatalaga QC ma sapalai fa'atau atu. |
Talosaga mo PETG Card Samples ma B2B Quote
O le PETG card o se pepa palasitika laminated lea e faʻaogaina ai le PETG mo le lomitusi autu, lagolago autu, ufiufi manino poʻo se tuʻufaʻatasia o nei laulau. O le PETG o se polyester fa'alelei glycol e fa'atauaina mo le manino, faigata ma le fa'aogaina o le vevela. E mafai ona faʻaaogaina i fausaga faʻavae PETG atoatoa pe tuʻufaʻatasia ma PVC fetaui, PET, faʻapipiʻi ma faʻaeletoroni.
Pa'epa'e po'o lanu PETG 'autu e fausia ai le mafiafia o kata, opacity ma malo. E mafai fo'i ona ave fa'aoffset, silk-screen po'o ata numera. O le va'aiga i luga, lanu, mafiafia fa'apalepale ma le mautu fa'atatau e taua tele mo le lomitusi faifaipea ma lamination.
O lo'o ufiufi PETG manino fa'apipi'i ata ma maua ai le iila mulimuli, matte po'o le fa'apitoa. O le manino fa'alava, puao, fa'amea i luga, fa'apipi'i ma le fa'atinoga e tatau ona va'ava'ai ese'ese mai le laupepa pa'epa'e.
O se pepa PETG ua mae'a e mafai ona aofia ai ni laupepa autu, lua fa'apipi'i, vaitusi, fa'apipi'i, antenna RFID, pu, laina fa'amaneta, laupapa saini, hologram po'o ata fa'apitoa. O vaega ta'itasi e suia le mafiafia o kata, fa'apipi'i, fetu'una'i ma filifiliga fa'ai'uga o le olaga.
Pepa Autu PETG paepae
Lau'ele'ele PETG lolomi mata
| Card Fausiaina Fauga | Layer masani Fa'apena | sili ona fetaui B2B Fa'aoga |
|---|---|---|
| Kata atoa-PETG | PETG fa'apipi'i + lolomi PETG autu + PETG fa'amaufa'ailoga nofoaga + PETG fa'apipi'i | Polokalama kata e leai se PVC e su'e se fausaga polymer sili atu tutusa |
| PETG/PVC Composite Card | PETG autu tu'ufa'atasia ma le PVC fa'apipi'i po'o isi pepa pepa PVC | Falegaosimea e fa'aogaina ai le PVC-fesoasoani faiga ma fa'amatalaga tu'ufa'atasi |
| PETG RFID Card | PETG lolomi lapisi + RFID prelam inlay + PETG poʻo faʻapipiʻi fetaui | Faletalimalo, avanoa, felauaiga, lotoa ma polokalame fa'afiafia |
| PETG Contact-Chip Card | Laminated PETG card body with miled cavity and embedded chip module | Teugatupe, totogi, telefoni ma fa'amautu talosaga fa'amaumauga pe a mae'a fa'ailoga |
| PETG Magnetic-Stripe Card | PETG autu fa'atasi ai ma HiCo po'o LoCo fa'amau maneta | Faletalimalo, avea ma sui auai, meaalofa, avanoa ma polokalama fa'akomepiuta |
O le itulau muamua o loʻo taʻua ai le tuʻuina atu o le PVC faʻapipiʻi mo PETG/PVC composite kata. E mafai ona avea lenei mea ma se filifiliga faʻatinoina, ae e le tatau ona faʻatauina le kata e pei o PVC-free poʻo mono-material. E tatau ona atagia i fa'amatalaga tau si'osi'omaga ma le toe fa'aaogāina o fa'ailoga uma.
O le fa'aogaina o le PETG mo fa'alava tetele e mafai ona fa'afaigofie ai le fa'ailoaina o mea, ae o vaitusi, meataalo, antenna, ta'avale, mea fa'apipi'i ma mea e puipuia ai e mafai lava ona fa'alavelaveina le toe fa'aaogaina ma le tumau. E tatau ona su'e le kata atoa.
O fa'atauga nei o lo'o taofia mai le ulua'i itulau Wallis ma toe fa'atulagaina mo sailiga fa'apolofesa. E tatau ona fa'atatauina o ni fa'atatauga fa'asino se'ia fa'amaonia le togi sa'o, metotia o su'ega, fa'atulagaina, fa'apalepale ma le tusi fa'aputuga.
| Meatotino | manino PETG Pepa | Pa'epa'e PETG Core | PETG Pepa Fa'asinomaga |
|---|---|---|---|
| mafiafia | 65–100μm | 80–400μm | 65–400μm |
| Lanu | Malamalama | Lanu pa'epa'e | Lanu pa'epa'e |
| Laufanua | Iila maualuga | Mata | Mata |
| Tete'e i luga | ≥36 dynes/cm, itu lomitusi | ≥38 dynes/cm, itu lomitusi | ≥38 dynes/cm, itu lomitusi |
| Malosi Tetele, MD | ≥38MPa | ≥40MPa | ≥40MPa |
| Malosi | 1.28 ± 0.05g/cm³ | 1.30 ± 0.05g/cm³ | 1.30 ± 0.05g/cm³ |
| Vicat A120 | 76 ± 2°C | (77–79) ± 2°C | 100 ± 2°C; e tatau ona fa'amaonia le tulaga maualuga o le vevela |
O le koluma lona tolu o le 'PETG pepa' o loʻo faʻaalia ai se faʻamatalaga sili atu le maualuga o Vicat nai lo mea manino ma papaʻe. E tatau i tagata fa'atau ona talosagaina le togi sa'o o le resini, tusi fa'ata'ita'i ma le fa'atulagaina o galuega fa'atino a'o le'i fa'aogaina lenei tau i se mamanu kata.
Fa'ata'ita'iga Card PETG Custom
Fa'auma PETG Card Structure
Ole fa'ailoga masani ole ID-1 po'o le CR80 pepa e tusa ma le 85.60 × 53.98mm fa'atasi ai ma le mafiafia fa'aigoaina lata ane i le 0.76mm. Ole tu'ufa'atasiga fa'ai'u ole PETG e tatau ona fa'amauina mo le fa'amalosi, fa'aitiitia, vaitusi, fa'apipi'i, pu, antenna, fa'amaneta ma foliga fa'apitoa.
| Card Component | Fuafuaga Manaoga |
|---|---|
| Fa'asaga i luma | Filifili le fua PETG manino, fa'ai'u, fa'ailoga fa'ailoga po'o le puipuiga malu ma le fa'apipi'i |
| Lolomi PETG Core | Fa'aaofia le fua fa'atatau, vaitusi ata, fa'ailoga lanu ma le resitalaina lolomi |
| Autu Tutotonu / Inlay | Fa'amatalaga mo pepa fa'atulagaina, antenna, tu'i pu'upu'u, mea fa'apipi'i ma lua fa'apitonu'u po'o se va'a |
| Autu Lolomi tua | Fa'apaleni pito pito i luma ma fa'atonutonu ata fa'asaga i tua po'o vaega saini |
| Fa'amau i tua | Fa'aaofia ai le fa'ai'uga, fa'ailoga, fa'ailoga saini ma mana'oga fa'apitoa |
| Pepa Fa'amuta Fa'amuta | Fua le tele, mafiafia, mafolafola ma galuega pe a uma lamination, malulu, tuʻi ma toe faʻaleleia |
O fua fa'atatau pito i luma ma tua, paleni lomitusi ma fa'atonuga i luga ole laiga e mafai ona fa'aitiitia ai le fa'alavelave. O fausaga fa'afefiloi PETG/PVC e mana'omia ai le fa'aitiitiga fa'aopoopo ma le su'esu'ega fa'atasi.
Ole lisi ole oloa ole taimi nei ole 295 × 365mm ma le 480 × 590mm. E tatau ona faauigaina faiga fa'apitoa mai le lomitusi offset, lamination plate, numera o kata i le laupepa, fa'ailoga resitala, fa'amau fa'amau ma le fa'atulagaina o tu'i.
| Metotia Lomitusi | Fa'aaogā masani | Mana'omia Fa'amaoniga |
|---|---|---|
| Lomitusi Offset | Lanu fa'agasologa maualuga, ata Pantone, laina lelei ma ata fa'amaumau kata | vaitusi palasitika, malosi i luga, mago, poloka, adhesion ma lamination tetee |
| Lomiga Siliki | Opaque paepae, u'amea, lanu lanu, laupapa saini ma vaitusi aoga | O le mafiafia o le vaitusi, felagolagoma'i solvent, fofo, fetuutuunai ma fa'apipi'i fa'apa |
| Lomiga Fa'atekinolosi UV | Pu'upu'u tamo'e, fa'ata'ita'iga, fa'ata'ita'i fesuia'i ma polokalame kata fa'apitoa | Primer, fofo, toomaga, manogi, fetuutuunai ma le pipii post-lamination |
| Thermal/Retransfer Personalization | Igoa, ata, numera, barcodes ma fa'asalalauga fa'apitonu'u i kata ua mae'a | Lomitusi fetaui, lipine poʻo le faʻaliliuina o ata, vevela, luga ma felauaiga |
| Fa'asinomaga Laser | Na'o galuega fa'akomepiuta fa'amautu | Fa'apitoa le laser-responsive grade, fa'atusatusa ata, tali vevela ma su'ega tumau |
E mafai e le PETG ona tu'uina atu ata ma'ai pe'a fa'afetaui le mea e mafai ona lolomi, vaitusi ma lomitusi. O le fa'avasegaina o lanu, vaitusi vaitusi, fa'amauina, fa'agogo, fa'atonuga fa'aanti-setoff ma le suiga o lanu pe a uma le lamination e tatau ona fa'amaonia ma se fa'amaoniga o le gaosiga.
Holographic foil, UV lomitusi, microtext, guilloche, opitika fesuia'i vaitusi, saini panels ma tactile foliga e mafai ona faaopoopo, ae o le PETG lava ia e le otometi ona saunia e tetee-faafoliga faatinoga.
ID ma Avanoa Kata
Fa'aui ma Kata Fa'amaoni
RFID ma Smart Cards
O le itulau muamua o loʻo taʻua ai PETG e mafai ona faʻapipiʻiina i le PVC e aunoa ma le suia o meafaigaluega. E mafai ona fa'aaogaina laminators o iai, ae le tatau ona kopiina le fua masani PVC e aunoa ma se su'ega. PETG ma le PVC e eseese i le faamaluluina, faʻaitiitia ma le tali vevela.
Fa'atonu mea uma: Fa'amautu le PETG, PVC, fa'amau lolomi, fa'apipi'i ma fa'apipi'i i totonu o le siosiomaga gaosiga.
Fa'amaonia le fa'atonuga o le pepa: Fa'amaumau le fa'atonuga o masini, itu lomitusi, itu fa'apipi'i ma fa'asologa fa'aputu.
Amata ile su'esu'ega fa'atonutonu ole vevela: Atiina le vevela, mamafa ma nofo fa'ata'amilo i le tu'ufa'atasiga tonu.
Puipui vaega faaeletonika: Pulea le mamafa o le lotoifale faataamilo i le pu ma antenna.
Fa'amalie i lalo o le mamafa: Fa'amalo fa'amalo e fa'aleleia atili ai le mafolafola, fa'apipi'i ma le mautu.
Tulaga a'o le'i asiasia: Fua le mafiafia, pa'u, fa'aiti'i, pa'u ma galuega pe a uma ona toe fa'aleleia.
Loka le fua fa'amaonia: Fa'amau fa'aputu, ipu, ata fa'asa'o, fa'amatalaga vevela, mamafa, taimi ma le mālūlū.
| Lamination Aafiaga | Mafua'aga Fa'asa'o | Fa'atonuga |
|---|---|---|
| Delamination | Le lava le vevela, fa'alava e le fetaui, vaitusi vaivai po'o luga o le eleele | Toe iloilo le kemisi fa'amau, fofo lolomi, fa'amama, vevela ma le mamafa |
| Warpage | Papa le paleni, vevela tele po'o le malulu le pulea | Fa'apaleni le fa'aputuga ma fa'amalieina le fa'avevela ma le mālūlū |
| Pulu po'o Silvering | Ea maileia, susu, leaga le susu po'o le le lava o le tafe | Tu'u meafaitino, fa'alelei le savili ma toe iloilo le vevela/omiga |
| Suiga Lanu | Vaitusi maaleale vevela, fa'apipi'i aafiaga fa'apitoa po'o le nofo tele | Fa'aagavaaina vaitusi, fa'amaonia pe a mae'a lamination ma fa'aitiitia le mamafa o le mamafa |
| Chip po'o Antenna Fa'aletonu | O le vevela tele, mamafa po'o le fa'agaoioiga | Fa'aoga fa'aoga fa'aoga, lua, aluga ma su'ega fa'atino |
| Fa'atekonolosi | Card Atina'e Manaoga |
|---|---|
| RFID / NFC | Fa'amaonia le tele o taimi, chip, protocol, antenna geometry, inlay material, faitau faitau ma fa'asologa |
| Fa'afeso'ota'i Chip | Fa'amatala le module chip, le tele o le lua, loloto vili, fa'apipi'i, maualuga module ma le su'ega eletise |
| Lisi maneta | Filifili HiCo poʻo LoCo stripe, coercivity, tulaga, faʻapipiʻi, faʻailoga ma ofuina manaʻoga |
| Barcode / QR Code | Pulea fa'atusatusaga, sone filemu, sa'o o fua, ituaiga si'i ma puipuiga abrasion |
| Pepa Fa'atasiga Lua | Fa'amaopoopo fa'afeso'ota'i module, feso'ota'iga antenna, inlay, vili fa'ava, lamination ma fa'amaonia |
E tatau ona siaki le galuega a le Smart-card aʻo leʻi faʻapipiʻiina, pe a uma le lamination, pe a uma le tuʻiina poʻo le viliina, pe a maeʻa faʻapitoa ma pe a maeʻa faʻamalosi masini. E fesoasoani lea e fa'amavae fa'aletonu fa'agasologa.
RFID ma Polokalama Card Leai Fa'afeso'ota'i
Pepa Lomi ma Fa'asinomaga
| Application | Fautuaina PETG Card Focus | Critical Test |
|---|---|---|
| Faletupe ma Pepa Totogi | Fa'atonuina le tino kata, EMV module, stripe, lomitusi malupuipuia ma fa'ailoga fa'ailoga | Totogi-feso'ota'iga, chip-module, fa'avasegaina ma fa'auma fa'ailoga kata |
| ID ma Avanoa Kata | Ata lelei, barcode, RFID, laei i aso uma ma faʻaoga faʻapitonuʻu | Pi'o, abrasion, lomitusi fetaui ma le au faitau |
| Pepa Ki Faletalimalo | Magnetic poʻo le RFID card faʻatasi ai ma faʻailoga faʻailoga ma le ola tautua puʻupuʻu | Loka-faiga feso'ota'iga, encoding, susū ma fa'aauau le tagofiaina |
| Fa'aui ma Kata Fa'amaoni | Lomitusi sili, QR / barcode, luga masani ma lanu lanu | La'ei atotupe, su'esu'e, mata'i luga ma mautu lanu |
| Meaalofa ma Pepa Totogi Muamua | Fa'atauga fa'atauga, barcode, va'aiga maneta ma fa'agaioiga fa'atekinolosi | Tulaga lelei lolomi, va'aiga mata'i, barcode ma le fa'atauga fa'atau |
| Felauaiga ma Campus Cards | Pepa e leai ni feso'ota'iga ta'amilosaga maualuga ma le tino kata umi ma le fa'asinomaga lolomi | Ta'amilosaga o fefa'ataua'iga, fa'amaoni antenna, fa'asologa o tagata faitau ma le matua o le si'osi'omaga |
| Atina'e | Fa'atonuga |
|---|---|
| I'ila, Mata'i po'o le Lau'aisa | Filifili mea fa'apipi'i ma fa'amaonia le maosi, fa'apitoa ma foliga fa'apitoa |
| Fa'aaliga Holographic | Fa'amaufa'ailoga holographic overlay, patch po'o pepa iila fa'atasi ma su'ega fa'afefe ma va'aia |
| UV ma Fluorescent Lomiga | Fa'ailoga fa'alilolilo pe fa'ailoa fa'aaoga vaitusi agava'a ma su'esu'ega umi galu |
| Microtext ma Guilloche | Fa'atonuga maualuga, lolomi fa'atonutonu ma le fa'aogaina o le lamination |
| Embossing ma Hot Stamping | Fa'ata'ita'i pepa fa'amama-le tino, vevela, fa'apipi'i pepa ma tete'e ta'e |
| Laulau Saini | Lomi mata po'o le laulau fa'atasi e fetaui ma le mea faigaluega tusitusi |
| Area | Su'ega Fautuaina Iloiloga |
|---|---|
| Fua ma mafiafia | Umi, lautele, tulimanu tulimanu, mafiafia ma le faapalepale pe a uma le faʻatulagaina |
| Pi'o ma Tausi | Fa'asu'i faifaipea, fa'aletonu tumau, ta'e fa'apapa ma galuega fa'apitoa |
| Fa'apipi'i Fa'apa | Peel, delamination pito, vevela/sūsū le matua ma amio fa'afefe |
| La'ei luga | Osi, abrasion, ofu atotupe, lolomi va'aia ma hologram tumau |
| Avela ma Susū | Warpage, poloka, faʻaitiitia, suiga lanu, fesoʻotaʻiga ma galuega faʻaeletoroni |
| Fa'ailoaina i Vailaau Matautia | 'Ava, fa'amama, fa'amama, suau'u pa'u ma vaila'au fa'apitoa mo fa'aoga |
| UV ma le tau | Lanu, samasama, lolomi, susulu ma suiga faʻainisinia; mana'omia a'o le'i tagi i fafo |
| Fa'ailoga ma Faitau Galuega | Maneta, fa'afeso'ota'i ma le fa'afeso'ota'i galuega a'o le'i mae'a ma pe a mae'a fa'alavelave fa'ainisinia/si'osi'omaga |
E le mafai ona fa'avae na'o le filifiliga o meafaitino a le PETG e lima tausaga. Fa'ailoga pepa, mafiafia, fa'aeletonika, lomitusi, fa'aoga si'osi'omaga ma su'ega e tatau ona lagolagoina le olaga ta'ua.
| Mea Mea | Malosi Manatu | Autu |
|---|---|---|
| PETG | Malamalama lelei, ma'a'a'a, so'otaga fa'avevela ma malosi malosi e fau ai kata | Manaomia lomitusi agavaa ma lamination; toe fa'aaogaina avanoa eseese |
| PVC | Fa'atuina faiga taugofie, lautele sapalai ma masani lomitusi/personalization | Polymer o lo'o i ai le chlorine ma fa'atapula'aina pepa toe fa'aaogaina i le tele o maketi |
| Polycarbonate | Le vevela maualuga, aʻafiaga ma le faʻatinoga o le saogalemu; filifiliga leisa-tagata | Tau maualuga ma eseese meafaigaluega gaosiga / faʻamalama gaioiga |
| PETG toe fa'aaogaina | E mafai ona fa'aitiitia le mana'oga o le resini taupou pe a fa'amaonia mea e toe fa'aaogaina | Pulea le lanu, faʻaleagaina, mea faʻainisinia, puna ma faʻamaonia |
| PETG/PVC Composite | Atonu e fetaui ma faiga o lo'o iai nei ma tu'ufa'atasia galuega fa'avae filifilia | O le fausaga fa'afefiloi-polymer e le o le PVC-sa'oloto ma atonu e faigata atu ona toe fa'aaogaina |
| Talosaga | Fa'aoga Sa'o B2B |
|---|---|
| PVC-Free PETG Card | Fa'aaoga pe a leai se PVC i totonu o le tino pepa atoa, fa'apipi'i ma fa'alavalava talafeagai |
| Peti PETG toe fa'aaogaina | Fa'amautu se fa'aputuga ma toe fa'aaogā fa'atasi mo le kata ua mae'a ma ona vaega |
| Isi PETG toe fa'aaogaina | Fa'ailoa le pasene, puna'oa, metotia fa'atatau ma le lautele o tusi pasi |
| PETG fa'aolaola | Aua ne'i ta'ua mea e mafai ona fa'afouina se'i vagana ua fa'amaonia e le resini o lo'o tu'uina atu fa'amaumauga kaponi fa'aolaola |
| Tulaga Tulaga Kabone Maulalo | Lagolago ma se fa'atusatusaga o le olaga po'o oloa-carbon fa'aogaina e fa'aoga tutusa galuega fa'akomepiuta ma le olaga atoa |
| Kata faauoga-siosio | Suia le gagana lautele i uiga patino, faʻavae faʻamaoniga e pei ole PVC-free pe faʻamaonia mea toe faʻaaogaina |
O le PETG masani e masani lava ona fa'avae petrochemical ma e le mafai ona fa'aleagaina pe fa'apalapala. PETG toe fa'aaogaina ma togi fa'atatau i meaola o ni filifiliga tu'ufa'atasi e mana'omia ai fa'amaumauga patino.
PETG e le otometi le mea tau pepa kata maualalo. O le faʻatusatusaga saʻo e aofia ai mea mataʻutia, lolomi lolomi, lamination yield, suiga o meafaigaluega, faʻaleagaina o chip, kata teena, faʻapitoa, ola tautua, toe tuʻuina atu ma faʻamaumauga tumau.
| Su'esu'ega | B2B Ta'avale Tau |
|---|---|
| Tau o meafaitino | Fa'atusatusa PETG, PVC, PC ma mea e toe fa'aaogaina i totonu o filifiliga i le mafiafia ma le lelei tutusa |
| Lomiga fua | Fa'aaofia ai le fa'atinoina o le fafaga, fofo vaitusi, fa'atutusa o lanu, poloka ma toe fai |
| Lamination fua | Fua pulupulu, pupuni, delamination, fa'aleaga mea'ai ma fa'asa'oloto ipu |
| Meafaigaluega Fegalegaleai | Su'esu'e pe mana'omia e masini lomitusi, laminators, tu'i ma lomitusi o lo'o iai ni suiga pe fa'aleleia |
| Soifua Auaunaga | Fa'aaoga le fa'amaonia o le fa'aoga-fa'apitoa le tumau nai lo le fa'atauga lautele mea-ola |
| Tausi ma Talosaga | Fa'aaofia ai fa'amaonia mea e toe fa'aaogaina, su'ega, su'ega a tagata fa'atau ma fa'amaumauga fa'apitoa mo maketi |
| Su'esu'ega Mea | Fautuaina Pulea |
|---|---|
| Faasinomaga Mea | Taupou po'o le toe fa'aaogaina vasega, pusa resini, fa'ailoga oloa ma tusi fa'asinomaga |
| Ole mafiafia ma le tele | Fua fua, fesuiaiga o togi, umi, lautele, sikuea ma le faapalepale tipi |
| Matagofie ma Lanu Lelei | Pa'epa'e, opa, L*a*b*, puao, manino, iila, lanu uliuli ma le fa'aleagaina |
| Tulaga lelei | Fa'amata'u i luga, fua, maosiosia, itu togafitiga, pefu ma le fa'apipi'i puipui |
| Su'ega lolomi | Faʻapipiʻi, faʻamago, mamafa, taʻavale, Pantone fetaui, tusitusiga lelei, QR ma barcode |
| Su'ega Lamination | Malosi o le pa'u, puao, pua'a, fa'aiti'i, pi'i, fesuia'i lanu ma le puipuiga o pu |
| Ua mae'a le su'esu'ega o pepa | Fua, mafiafia, mafolafola, tulimanu tulimanu, tulaga lelei, lomitusi ma luga o faaletonu |
| Galuega Tekonolosi | Chip, antenna, laina mageta, barcode ma le faitau / encoder fetaui |
| Su'esu'e | Loto meafaitino, lotoa lolomi, lotoa inlay, lamination batch, card batch ma faamaumauga o asiasiga |
O le gaosiga o pepa PETG faifaipea e manaʻomia ai le faʻapipiʻiina o laupepa mautu, lanu ma le mafiafia, tipi mama, lomitusi, sauniuniga faʻapipiʻi, lamination, tuʻi, puʻu poʻo le faʻasologa o mea, faʻapitoa ma suʻesuʻega mulimuli. O le fa'ata'ita'iga fa'amaonia, galuega fa'ata'ita'i ma fa'amatalaga tusitusia e tatau ona fa'atumauina e fai ma fa'amatalaga o le gaosiga.
PETG Pepa Autu ma Card Gaosiga
Teu pepa PETG mafolafola, faʻamaufaʻailoga ma puipuia mai le susulu o le la, vevela, pefu ma tamatamai lima.
Aloese mai le lagolago fata e le tutusa ma le mamafa tele o le fa'aputuga e mafai ona fa'apupulaina pe poloka.
Tu'u mea i totonu ole potu lomitusi ma lamination a'o le'i fa'againa.
Fa'ese'ese pepa lolomi fa'atasi ai ma fa'ataga fa'amaonia pe'ā mana'omia e taofia ai le fa'aletonu.
Fa'apipi'i kata ua mae'a ile faitau fa'atonutonu ma ata puipui, atigipusa totonu ma pusa fa'atau atu.
Fa'aoga le afifiina o le susu, puipuiga o tulimanu ma le fa'amautuina o pallet mo felauaiga fa'avaomalo.
Fa'aoga le su'esu'ega muamua-i totonu, fa'a-muamua-ma fa'atumauina oloa, lotoa ma kata-vaega su'esu'e.
Fa'aputuina Mea Puipui
Sauniuniga Poloaiga auina atu i fafo
Falegaosimea-Tusa'o PETG Card ma Mea Fa'atau
Fofo pepa e tasi-taofi: PETG autu, fa'apipi'i, lomitusi, inlay, lamination ma fa'auma tu'uina pepa e mafai ona fa'amaopoopo.
Tele fausaga: All-PETG, PETG/PVC composite, RFID, fesoʻotaʻiga-masini ma kata mageta-stripe e mafai ona atiaʻe.
Fa'aleaganu'u lapopo'a ma fua: O le mafiafia o le apa ma le gaosiga-pepa lapopo'a e mafai ona fa'afetaui i le lomitusi ma le fa'ailoga kata.
Fa'ata'ita'iga lolomi ma lamination: E mafai ona fa'ata'ita'i fa'ata'ita'iga mo le lanu, pipi'i, pa'u, warpage ma le fa'atinoina o kata.
Lagolago gafataulimaina: e leai se PVC, mea e toe fa'aaogaina ma pepa tu'ufa'atasi e mafai ona toe iloiloina e fa'atatau i le fausaga tonu.
Fa'ato'aga-sa'o B2B sapalai: E talafeagai mo tagata gaosi kata, fa'asalalau, tu'ufa'atasi, faiga faletalimalo, faletupe, fa'aulufale mai ma tufatufa.
Fa'auma pepa talosaga, maketi fa'atatau ma le soifua tautua fa'amoemoe.
Fa'atonuga mana'omia: uma-PETG, PETG/PVC tu'ufa'atasi, RFID, fa'afeso'ota'i va'a po'o le fa'amaneta.
Ua mae'a le tele o kata, mafiafia, tulimanu tulimanu ma le aofa'i.
PETG lapis mafiafia, lanu pa'epa'e/manino, opacity, iila po'o matte mae'a.
Fa'ata'ita'iga, lanu Pantone, faiga lomitusi, fa'amatalaga fesuia'i ma faiga fa'apitoa.
RFID pu, taimi, antenna, faʻafesoʻotaʻi module, laina mageta poʻo le saini saini.
Fa'ailoga saogalemu e pei o le hologram, lolomi UV, microtext po'o le va'aiga mata'i.
Manaomia PVC-leai se, toe faʻaaogaina-anotusi, REACH, RoHS poʻo isi faʻamaumauga.
Aofa'i fa'ata'ita'iga, fa'ata'ita'iga fa'aletausaga, fa'apipi'i ma le taulaga e taunu'u ai.
Talosagaina fa'asologa o fa'ata'ita'iga ma fa'atagaga/faiga su'ega.
Talanoa i lau Poloketi Peta PETG Card
O le PETG card e fa'aogaina le PETG e fai ma autu lolomi, fa'avae fa'avae, fa'apipi'i manino po'o le tu'ufa'atasiga o laulau. E mafai ona gaosia e pei o se PETG uma poʻo se pepa tuʻufaʻatasia.
PETG pepa autu o se pepa mata-gaosi mea. O le PETG card o le oloa maeʻa pe a maeʻa le lolomiina, lamination, tuʻi, faʻapitoa ma filifili pu poʻo le tuʻufaʻatasia.
Ioe. Poloketi e mafai ona aofia ai le PETG autu ma mea faʻapipiʻi, tino pepa lolomi, kata avanoa poʻo kata faʻapitoa faʻamaeʻaina e tusa ai ma faʻamatalaga ua malilie i ai.
Le itulau muamua lisi 65-100μm manino pepa, 80-400μm paepae PETG autu ma 65-400μm PETG pepa. E tatau ona fa'amaonia le togi sa'o ma le fa'apalepale.
Ioe. Ole fa'asologa masani CR80/ID-1 e tusa ma le 85.60 × 53.98mm. Ua mae'a mafiafia ma le faapalepale e tatau ona fa'amaonia pe a mae'a fa'amau.
O le tumau e faʻalagolago i le vasega, faʻavae mamanu, mafiafia, lamination ma faʻaoga tulaga. PETG e mafai ona tuʻuina atu le malosi malosi, ae o se faʻatusatusaga faʻamaeʻaina e tatau ona faʻataʻitaʻiina mo le faʻaogaina.
Ioe. Fa'aaogā se mea fa'apitoa e mafai ona lolomi ma le palasitika-fesoasoani vaitusi offset. Su'e su'esu'e, pipi'i, fa'agogo, poloka ma le lanu fa'aulu.
UV numera, fa'aliliuina vevela ma toe fa'aliliuina galuega e mafai ona atia'e. Lomitusi, vaitusi po'o le lipine, fa'afanua pepa ma le fetaui lelei e tatau ona fa'amaonia.
Ioe, e mafai ona atiaʻe fausaga tuʻufaʻatasia, ae o le PETG / PVC faʻapipiʻi, faʻaitiitia, paʻu, vevela ma le matua e tatau ona tofotofoina. O le taunuuga e le o se pepa e leai se PVC.
O lapisi PETG talafeagai e mafai ona faʻapipiʻi vevela, ae o vaitusi, faʻapipiʻi, mea faʻafefiloi ma mea faʻaeletoroni e mafai ona suia le fusi. E mana'omia le su'ega pa'u.
O lomitusi o lo'o i ai nei, laminators ma tu'i e mafai ona fa'aoga, ae tatau ona fa'amalieina tulaga mo PETG. Aua e te manatu ole fua masani PVC ole a maua ai le i'uga tutusa.
Ioe. Fa'ata'ita'iga chip, fa'asologa, antenna, mea fa'apipi'i, mamafa, vevela, mafiafia o pepa, fa'asologa ma le fetaui ma le faitau e tatau ona fa'amalamalamaina.
Ioe. O kata fa'afeso'ota'i-chip e mana'omia le viliina o le lua, fa'apipi'i module, fa'atonutonu le fa'amafola o luga ma su'ega eletise pe a uma ona fa'apipi'i.
Ioe. E mafai ona atia'e filifiliga fa'a-mageta HiCo ma LoCo fa'atasi ma fa'alava fa'afetaui, tulaga sa'o, fa'ailoga ma su'ega fa'aofuina.
Ioe. E mafai ona tu'u fa'atasia fa'auluuluga o le Holographic, inks UV, microtext ma isi vaega e ala i faiga lomitusi eseese ma lamination.
PETG e mafai ona toe fa'aaogaina i se vaitafe fetaui, ae o kata ua mae'a e mafai ona i ai vaitusi, meataalo, antennas, ta'avale ma fa'afefiloi. E tatau ona fa'amaonia le aoina ma le fa'agaoioiga fa'apitonu'u.
Leai. O le PETG/PVC composite card e iai le PVC. Fa'aaogā se tagi e leai se PVC pe'ā fa'amaonia uma le fa'atulagaina o kata fa'apitoa.
O le PETG masani e masani ona fa'avae petrochemical. Bio-based po'o le bio-attributed anotusi e mana'omia ai se fa'ailoga resini fa'apitoa ma fa'amaumauga lagolago.
Leai se fa'ai'uga lautele e tatau ona faia e aunoa ma se fa'atusatusaga o le olaga po'o se su'esu'ega o oloa-carbon e aofia ai meafaitino, gaosiga, ola tautua ma le iuga o le olaga.
O le fa'aoga i fafo e mana'omia ai le UV, vevela, susū, vai ma su'ega abrasion. Ole PETG masani e le tatau ona faʻamatalaina o se tau e aunoa ma se faʻailoga ma faʻamaoniga faʻapitoa.
O filifiliga PETG toe fa'aaogaina e mafai ona talanoaina i lalo o mea e mana'omia, lanu, fa'atinoga, avanoa, MOQ ma fa'amaumauga.
Ioe. Fa'ata'ita'iga meafaitino po'o kata fa'ata'ita'i e tatau ona lolomi, fa'apalapala, tu'i, fa'apitoa ma fa'ata'ita'iina galuega a'o le'i gaosia tele.
MOQ faʻalagolago pe o le faʻatonuga mo pepa mata, kata avanoa poʻo kata maeʻa, faʻatasi ai ma le mafiafia, lanu, fausaga, pu, lomitusi, tulaga saogalemu ma afifiina.
Tuuina atu pepa talosaga, fausaga, lapopoa, mafiafia, galuega taulima, lomitusi, pu po'o se laina, vaega saogalemu, aofa'i, tausisia manaoga, afifiina ma taunuuga.
Fa'afeso'ota'i le Wallis Plastic mo pepa fa'aleaganu'u PETG, PETG laupepa autu ma mea fa'apipi'i manino mo teuga tupe, ID, avanoa, faletalimalo, sui auai, meaalofa, felauaiga ma polokalama-kati atamai. E lagolagoina e la matou 'au le fa'avasegaina o le laulau, lomitusi, lamination, RFID ma le tu'ufa'atasiga o pu, fa'amaumauga o le si'osi'omaga, fa'ata'ita'iga fa'ata'ita'iga ma sapalai B2B sa'o ile falegaosimea.
