Eco Xɔlɔ̃wɔwɔ kple Nyui Pricce PETG Kpekpeɖeŋugbalẽvi kple PETG Core Sheet-WallisPlastic

1.Ŋgɔdonya

Le egbegbe xexe si me wotsia dzi ɖe nutome ŋu le me la, egbɔkpɔnu siwo li tegbee eye womexɔa ga geɖe o didi le vevie wu. Ne míeƒo nu tso agbalẽtatanuwo ŋu la, PETG kaɖi siwo ŋu PETG ƒe agbalẽvi veviwo le la va xɔ ŋkɔ le woƒe nɔnɔme si me gblẽa nu le nutome ŋu o eye woƒe asi bɔbɔ ta. Nyati sia ku viɖe siwo le PETG-gbalẽviwo ŋu kple woƒe nɔnɔmewo me, eye wòhe susu yi ŋusẽ nyui si wokpɔna ɖe nutome dzi kple woƒe gazazã nyuie dzi. Eyata, mina míaku nu me le PETG-kaɖi siwo me gblẽa nu le nutome ŋu o ƒe xexeame eye míake ɖe nusita wonye tiatia nyui aɖe ŋu.

Míaƒe PETG film agbalẽvi na plastik kaɖi si woxɔ to aƒeme kple duta asisiwo tso Anyiehe Ɣedzeƒe Asia, UAE, Pakistan,etc.We hã ate ŋu ana wò PVC overlay , ale be nàte ŋu awɔ PETG + PVC ƒokpli kaɖiwo, xɔ wò kadodo.

Ŋutilã me Dᴐwᴐwᴐ 

Nu	PETG ƒe agbalẽa me kɔ	PETG ƒe nu vevi ɣi	PETG ƒe agbalẽvi
Eƒe titrime (μm) .	65-100 me	80-400 ƒe xexlẽme	65-400 me
Amadede	si me kɔ	amadede ɣi	amadede ɣi
Ŋkume	high glossy	Mat	Mat
Anyigba ƒe teteɖeanyi	≥36	≥38 ƒe xexlẽme	≥38 ƒe xexlẽme
(dynes/cm) ƒe xexlẽme.	agbalẽtata ƒe akpa dzi	agbalẽtata ƒe akpa dzi	agbalẽtata ƒe akpa dzi
Tensile ƒe ŋusẽ (MD)(Mpa) 1.1.	≥38 ƒe xexlẽme	≥40 ƒe xexlẽme	≥40 ƒe xexlẽme
Toto (g/cm3) .	1.28±0.05 ƒe xexlẽme	1.30±0.05 ƒe xexlẽme	1.30±0.05 ƒe xexlẽme
Vicat ƒe amegã A120(°C) .	76±2	(77-79)±2 ƒe xexlẽme	100±2 ƒe xexlẽme

 

2. Nɔnɔme Veviwo

1. Sesẽme si kɔkɔ ŋutɔ;

2. Ŋusẽ si lolo le ŋusẽkpɔɖeamedzi ŋu;

3. Dɔwɔwɔ ƒe mɔnu gbadzaa;

4. Mɔ̃ɖaŋununya ƒe ŋusẽ si lolo.

5. Woate ŋu awɔ laminated kple PVC, mehiã be woatrɔ asi le dɔwɔnuwo wɔwɔ ŋu o.

3. PETG Kpekpeɖeŋugbalẽviwo gɔmesese

PETG, alo polyethylene terephthalate glycol-modified, nye dzoxɔxɔ ƒe polymer si wonya ɖe eƒe eme kɔ, enɔa anyi didina, eye wòte ŋu wɔa dɔ le mɔ vovovowo nu ta. Wotsɔa PETG-gbalẽviwo wɔa PETG-kaɖiwo, siwo me kɔ ŋutɔ eye womete ŋu ƒoa wo, atikewo, kple UV keklẽ nu o. Wozãa agbalẽvi siawo zi geɖe le dɔwɔɖoɖowo abe ID-gbalẽvi, mɔɖeɖegbalẽviwo, nuteƒewɔwɔgbalẽviwo, kple bubuwo ene me.

4. Viɖe si Le Nutoa Me Xɔlɔ̃wɔwɔ Ŋu

4.1 Nutoa me ƒe ŋusẽkpɔɖeamedzi dzi ɖeɖe kpɔtɔ

PETG-kaɖiwo naa mɔnu si me amadede dzẽ le wu PVC-kaɖi xoxowo. To vovo na PVC la, PETG nye nusi woate ŋu azã ake si ŋu woate ŋu atrɔ asi le bɔbɔe ahagbugbɔ azã. Ne ètia PETG-kaɖiwo la, èwɔa akpa aɖe le plastik-gbeɖuɖɔ dzi ɖeɖe kpɔtɔ me eye nèɖea carbon footprint si do ƒome kple kaɖiwo wɔwɔ dzi kpɔtɔna.

4.2 Dzɔtsoƒe si woate ŋu awɔ yeyee

Wokpɔa PETG tso ami me, gake woate ŋu awɔe tso nu yeyewo abe nugbagbewo ƒe ƒuƒoƒo ene hã me. Alesi woate ŋu atrɔ ɖe nɔnɔmewo ŋu alea na be adzɔnuwo wɔlawo te ŋu tia nu xoxo siwo li tegbee, si wɔnɛ be PETG-kaɖiwo ƒe nɔnɔme si me gblẽa nu le nutome ŋu o la ganyo ɖe edzi.

5. Viɖe siwo le PETG Kpekpeɖeŋugbalẽviwo ŋu

5.1 Anɔ didiƒe kple Agbenɔƒe Didi

PETG-kaɖiwo nɔa anyi didina ŋutɔ, womete ŋu ƒoa wo o, eye woƒe didime li ke nyuie ŋutɔ. Woate ŋu anɔ te ɖe nutome ƒe nɔnɔme sesẽwo nu, eye woakpɔ egbɔ be wò agbalẽviawo gakpɔtɔ li eye woate ŋu atsɔ wo afia ɣeyiɣi didi aɖe.

5.2 Agbalẽtata ƒe Nyonyome Deŋgɔ

PETG-gbalẽviwo naa agbalẽtata me kɔna etɔxɛe eye amadedewo me kɔna nyuie, si wɔe be wonye tiatia nyui aɖe na agbalẽtata si ƒe nɔnɔme deŋgɔ. Eɖanye atsyã siwo me kɔ, nuŋɔŋlɔ ɖaɖɛwo, alo nɔnɔmetata siwo me dzo le o, PETG-kaɖiwo naa agbalẽtata ƒe nyonyome wɔdɔɖeamedzi si nana kaɖia ƒe dzedzeme bliboa nyona ɖe edzi.

5.3 Nusiwo woate ŋu azã le mɔ vovovowo nu kple alesi woate ŋu atrɔ asi le wo ŋu

PETG-kaɖiwo naa aɖaŋu vovovowo. Woate ŋu atrɔ asi le wo ŋu bɔbɔe kple nyatakaka siwo trɔna, holographic foils, embossing, kple atsyɔ̃ɖoɖo bubuwo. Alesi nàte ŋu azãe le mɔ vovovowo nu alea na nète ŋu wɔa agbalẽvi tɔxɛ siwo léa ŋku ɖe nu ŋu siwo sɔ kple wò adzɔnu ƒe dzeside kple nudidi tɔxɛwo.

6. PETG Kpekpeɖeŋugbalẽviwo ƒe Gazazã Nyuie

6.1 Nuwɔwɔ si ƒe asi bɔbɔ

PETG nye nusi mexɔ asi o, si wɔe be PETG kaɖiwo nye egbɔkpɔnu si me gazazã mele o ne wotsɔe sɔ kple kaɖi ƒe tiatia bubuwo. PETG-gbalẽviwo ƒe amesinɔnɔ le asi siwo sɔ nu, tsɔ kpe ɖe woƒe agbenɔƒe didi ŋu, na be woadzra ga geɖe ɖo le ɣeyiɣi didi aɖe megbe.

6.2 Gazazã siwo woatsɔ aɖɔli woe dzi ɖe kpɔtɔ

Le alesi PETG-kaɖiwo nɔa anyi didina ta la, mɔnukpɔkpɔ si mebɔ be woagblẽ alo avuvu o, si wɔnɛ be mehiã be woaɖɔli wo enuenu o. Esia gakpena ɖe PETG-kaɖiwo ƒe gazazã ŋu, elabena àte ŋu azã wo geɖe wu evɔ màgazã ga bubuwo o.

5. Nyataƒoƒo

Le nyataƒoƒo me la, PETG kaɖi siwo ŋu PETG ƒe agbalẽ veviwo le la naa nu gbagbewo ƒe agbenɔnɔ ŋuti xɔlɔ̃wɔwɔ kple woƒe asixɔxɔ ƒe ƒuƒoƒo si ƒonɛ ɖe ame nu. Ne ètia PETG-gbalẽviwo la, èwɔa akpa aɖe le nutome ƒe nyonyo me to plastik gbeɖuɖɔ dzi ɖeɖe kpɔtɔ kple nusiwo woate ŋu azã ake xɔxɔ me. Tsɔ kpe ɖe eŋu la, agbalẽvi siawo nana wonɔa anyi didina nyuie, wota wo nyuie wu, eye woate ŋu awɔ wo le mɔ vovovowo nu. Esi PETG-gbalẽviwo mexɔa ga geɖe o eye wonɔa agbe didi ta la, wodzena abe tiatia nyui aɖe ene na asitsahawo kple habɔbɔ siwo le agbalẽtata ƒe kuxiwo gbɔ kpɔnu siwo li tegbee eye womexɔa ga geɖe o dim.

Míaƒe Producing line

Nya Siwo Wobiaa Ame Enuenu (FAQs) .

Q1: Ðe PETG-kaɖiwo nɔa anyi didina abe PVC-kaɖiwo enea?

Ẽ, PETG-kaɖiwo nɔa anyi didina ŋutɔ eye woate ŋu anɔ te ɖe nɔnɔme sesẽwo nu nyuie wu PVC-kaɖiwo. Womete ŋu nɔa te ɖe ƒoƒo nu o eye woléa woƒe dzedzeme me ɖe asi ɣeyiɣi didi wu.

Q2: Ðe woate ŋu agbugbɔ PETG-gbalẽviwo awɔ dɔa?

Ẽ, PETG nye nusi woate ŋu azã ake, eye woate ŋu agbugbɔ PETG-kaɖiwo awɔ dɔ bɔbɔe ahawɔ wo ŋudɔ atsɔ awɔ nu yeyewo.

Q3: Ðe woate ŋu atrɔ asi le PETG kaɖiwo ŋu kple dedienɔnɔ ƒe nɔnɔmewoa?

Blibo! Woate ŋu atrɔ asi le PETG kaɖiwo ŋu kple dedienɔnɔ ƒe nɔnɔme vovovowo abe holographic foils, UV printing, kple RFID mɔ̃ɖaŋununya be woƒe dedienɔnɔ nanyo ɖe edzi eye woaxe mɔ ɖe aʋatsokaka nu.

Q4: Aleke PETG-gbalẽviwo kpena ɖe nuto si me amagbewo bɔ ɖo ŋui?

PETG-gbalẽviwo ɖea ŋusẽ si gblẽa nu le nutome ŋu dzi kpɔtɔna to nusiwo woate ŋu azã ake zazã kple plastik-gbeɖuɖɔ dzi ɖeɖe kpɔtɔ me. PETG tiatia ɖe PVC kaɖiwo teƒe ɖea carbon footprint si do ƒome kple kaɖiwo wɔwɔ dzi kpɔtɔna ŋutɔ.