Eco adamfofa ne Bo pa PETG Kaad a PETG Core Krataa-WallisPlastic

1.Nnianim asɛm

Wɔ nnɛ wiase a ɛhwɛ nneɛma a atwa yɛn ho ahyia so no, ano aduru a ɛtra hɔ daa na ɛho ka sua a wobenya no ho hia sen biara. Sɛ ɛba nneɛma a wɔde tintim nhoma so a, PETG kaad a PETG core sheets wom no agye din esiane sɛ ɛnyɛ nea ɛmma nneɛma a atwa yɛn ho ahyia nsɛe na ne bo yɛ den nti. Saa asɛm yi hwehwɛ mfaso ne nneɛma a ɛwɔ PETG nkrataa so, na ɛtwe adwene si nkɛntɛnso pa a enya wɔ nneɛma a atwa yɛn ho ahyia so ne sɛnea ɛho ka sua. Enti, momma yɛnkɔ wiase a ɛyɛ PETG kaad a ɛnyɛ nea ɛde nneɛma a atwa yɛn ho ahyia ho no mu na yenhu nea enti a ɛyɛ paw kɛse.

Yɛn PETG sini krataa ma plastic kaad akwaaba denam fie ne amannɔne adetɔfo a wofi South East Asia, UAE, Pakistan,etc.We nso betumi ama wo PVC overlay , enti wubetumi ayɛ PETG + PVC composite cards, akwaaba wo connect.

Anisoɔ Mmɔdemmɔ 

Adeɛ	PETG krataa no mu da hɔ	PETG core fitaa	PETG krataa no
Nneɛma a ɛyɛ den (μm) .	65-100 na ɛwɔ hɔ	80-400 na ɛwɔ hɔ	65-400 na ɛwɔ hɔ
Ahosuo	fann	kɔla fitaa	kɔla fitaa
Ani	high glossy	Mat	Mat
Nhyɛso a ɛwɔ soro	≥36 na ɛwɔ hɔ	≥38 na ɛwɔ hɔ	≥38 na ɛwɔ hɔ
(dynes/cm) na ɛwɔ hɔ.	tintim afã	tintim afã	tintim afã
Ahoɔden a wɔde twetwe nneɛma (MD)(Mpa) .	≥38 na ɛwɔ hɔ	≥40 na ɛwɔ hɔ	≥40 na ɛwɔ hɔ
Muduro (g/cm3) .	1.28±0.05 na ɛwɔ hɔ	1.30±0.05 na ɛwɔ hɔ	1.30±0.05 na ɛwɔ hɔ
Vicat na ɔkyerɛwee A120(°C) .	76±2 na ɛwɔ hɔ	(77-79)±2 na ɛwɔ hɔ	100±2 na ɛwɔ hɔ

 

2. Nneɛma Titiriw a Ɛwɔ Hɔ

1. Toughness a ɛkorɔn;

2. Ahoɔden a ɛkorɔn a ɛfa nkɛntɛnso ho;

3. Wide dwumadie ahodoɔ;

4. Mfiri ahoɔden a ɛkorɔn.

5. Wobetumi de PVC laminated, ɛho nhia sɛ nsakrae yɛ mfiri.

3. PETG Kaad ho ntease

PETG, anaa polyethylene terephthalate glycol-modified, yɛ polymer a wɔde yɛ ɔhyew a wonim no sɛ emu da hɔ, ɛyɛ den, na ɛyɛ adwuma wɔ mmeae pii. Wɔde PETG nkrataa a ɛyɛ nea ɛda adi kɛse na ɛko tia nsunsuanso, nnuru, ne UV mframa na ɛyɛ PETG nkrataa. Wɔtaa de saa nkrataa yi di dwuma wɔ application ahorow te sɛ ID card, access card, loyalty card, ne nea ɛkeka ho mu.

4. Mfaso a Ɛma Nneɛma a Atwa Yɛn Ho Ahyia Ho

4.1 Nneɛma a Atwa Yɛn Ho Ahyia no so tew

PETG nkrataa ma wonya ɔkwan foforo a ɛyɛ ahabammono sen PVC kaad a wɔde di dwuma wɔ amanne kwan so. Nea ɛnte sɛ PVC no, PETG yɛ ade a wotumi de di dwuma bio a ɛnyɛ den sɛ wɔbɛyɛ ho adwuma na wɔasan de adi dwuma bio. Sɛ wopaw PETG kaad a, woboa ma plastic a wɔsɛe no so tew na wotew carbon footprint a ɛbata kaad a wɔyɛ ho no so.

4.2 Nneɛma a Wɔde Yɛ Foforo

Wɔnya PETG firi petroleum mu, nanso wɔbɛtumi nso afiri nneɛma a wɔtumi yɛ foforɔ te sɛ biomass mu. Saa nsakrae yi ma wɔn a wɔyɛ nneɛma no paw nneɛma a wɔde yɛ nneɛma a ɛbɛkɔ so atra hɔ daa, na ɛma PETG kaad ahorow a ɛnyɛ nea ɛmma nneɛma a atwa yɛn ho ahyia no yɛ kɛse bio.

5. Mfaso a ɛwɔ PETG Kaad so

5.1 Nteaseɛ a ɛkyɛ ne Nkwa tenten

PETG kaad yɛ nea ɛyɛ den yiye, entumi nsɛe, na ɛwɔ nsusuwii a ɛyɛ den yiye. Wotumi gyina nneɛma a atwa yɛn ho ahyia a emu yɛ den ano, na wɔhwɛ hu sɛ wo nkrataa no bɛkɔ so atra hɔ na wɔatumi akyerɛ bere tenten.

5.2 Ntintim a Ɛkorɔn

PETG nkrataa ma tintim mu da hɔ soronko na kɔla ahorow no yɛ hyew, na ɛma ɛyɛ nea eye ma tintim a ɛyɛ fɛ. Sɛ́ ɛyɛ mfonini ahorow a ɛyɛ nwonwa, nsɛm a ɛyɛ nnam, anaa mfonini ahorow a ɛyɛ hyew no, PETG kaad ahorow no de nkyerɛwee a ɛyɛ nwonwa ma a ɛma kaad no nyinaa yɛ fɛ.

5.3 Nneɛma a wɔde yɛ nneɛma pii ne nea wotumi sesa

PETG kaad ahorow no ma wonya nneɛma ahorow pii a wobetumi apaw. Wobetumi de data a ɛsakra, holographic foils, embossing, ne nneɛma afoforo a wɔde siesie wɔn ho ayɛ no sɛnea wɔpɛ. Saa sɛnea wotumi yɛ nneɛma pii yi ma wutumi yɛ nkrataa soronko a ɛtwetwe adwene a ɛne wo branding ne w’ahwehwɛde pɔtee ahorow hyia.

6. Ka a wɔbɔ wɔ PETG Kaad ho

6.1 Nneɛma a wɔyɛ a ne boɔ yɛ den

PETG yɛ ade a ɛho ka sua, na ɛma PETG kaad yɛ ano aduru a ɛnyɛ sika pii sɛ wɔde toto kaad afoforo a wobetumi apaw ho a. PETG nkrataa a ɛwɔ hɔ a ne bo yɛ den, ne ne nkwa nna tenten no kyerɛ sɛ wɔbɛkora sika kɛse so wɔ bere tenten mu.

6.2 Ɛka a wɔbɔ wɔ nneɛma a wɔde besi ananmu ho a wɔatew so

Esiane sɛ PETG nkrataa no tumi kyɛ nti, hokwan a ɛwɔ hɔ sɛ ɛbɛsɛe anaasɛ asɛe no sua, na ɛma ɛho nhia sɛ wɔtaa sesa. Eyi boa bio ma PETG kaad ho ka nyɛ den, efisɛ wubetumi de adi dwuma kɛse a wuntua ka foforo.

5. Nsɛm a wɔde wie

Sɛ yɛde rewie a, PETG kaad a PETG core sheets wom no de nneɛma a atwa yɛn ho ahyia a ɛnyɛ papa ne nea ne bo yɛ den a wɔaka abom a ɛyɛ nwonwa ma. Ɛdenam PETG nkrataa a wopaw so no, woboa ma nneɛma a atwa yɛn ho ahyia no kɔ so tra hɔ denam plastic nwura a wobɛtew so ne nneɛma a wotumi asan de adi dwuma a wugye tom no so. Bio nso, saa nkrataa yi ma ɛtra hɔ kyɛ yiye, tintim no yiye, na ɛma wotumi paw sɛnea wɔyɛ no wɔ mmeae ahorow. Esiane sɛ ɛho ka sua na ɛtra hɔ kyɛ nti, PETG kaad ahorow no da adi sɛ ade a nyansa wom ma nnwuma ne ahyehyɛde ahorow a wɔrehwehwɛ tintim ano aduru a ɛbɛkɔ so atra hɔ daa na ɛho ka sua.

Yɛn Producing line no

Nsɛm a Wɔtaa Bisa (FAQs) .

Q1: So PETG kaad yɛ den te sɛ PVC kaad?

Yiw, PETG kaad yɛ nea ɛyɛ den yiye na etumi gyina tebea horow a emu yɛ den ano yiye sen PVC kaad. Wɔntumi ntumi nsɛe wɔn na wɔkɔ so tra wɔn ho so bere tenten.

Q2: So wobetumi asan de PETG nkrataa adi dwuma bio?

Yiw, PETG yɛ ade a wotumi de di dwuma bio, na ɛnyɛ den sɛ wobetumi asan de PETG nkrataa adi dwuma na wɔayɛ ho adwuma de ayɛ nneɛma foforo.

Q3: So wobetumi de ahobammɔ nneɛma ayɛ PETG kaad ahorow no sɛnea wɔpɛ?

Pɛpɛɛpɛ! Wobetumi de ahobammɔ nneɛma ahorow te sɛ holographic foils, UV printing, ne RFID mfiridwuma ayɛ PETG kaad ahorow no sɛnea wɔpɛ na ama wɔn ahobammɔ ayɛ kɛse na wɔasiw atoro a wɔyɛ ano.

Q4: Ɔkwan bɛn so na PETG nkrataa boa ma tebea a ɛyɛ frɔmfrɔm ba?

PETG nkrataa brɛ nneɛma a atwa yɛn ho ahyia no ase denam nneɛma a wotumi de di dwuma bio ne plastic a wɔsɛe no a wɔtew so no so. PETG a wɔpaw sen PVC kaad no brɛ carbon footprint a ɛbata kaad a wɔyɛ ho no ase kɛse.