|
Wallis de PVC Overlay film sini a ɛda adi pefee ma ID, RFID ne asɔremma nkrataa. Paw grades a wɔakata so, a wɔakata so denneennen anaa nea wɔmfa nkata so, amanne kwan so thickness, krataa akɛse ne OEM bulk supply.
WLS- PVC Overlay film
WALLIS
| Kɔla: | |
|---|---|
| Thickenss : | |
| Coating: | |
| Dodow: | |
Wallis PVC Overlay film sini yɛ ahobammɔ ne bonding layer a ɛda adi pefee a wɔayɛ ama adwumayɛfo a wɔyɛ plastic card. Wɔde laminated wɔ card cores a wɔatintim so na ama ne soro a emu da hɔ, abrasion resistance, nsuo ho banbɔ, bonding ahoɔden, ne finished-card durability.
Wobetumi de nneɛma no ama sɛ nea wɔakata so PVC Overlay film , nea wɔakata so denneennen Overlay film , nea wɔakata so Overlay film Overlay film , ne magnetic stripe Overlay film , wobetumi de nneɛma no ama wɔ standard anaa customized thicknesses, sheet sizes, surface finishes, ne coating grades ama ID cards, bank cards, . RFID kaad, akwan a wɔfa so kɔ hɔ, asɔremma kaad, nokwaredi kaad, akyɛde nkrataa, ne kaad nneɛma afoforo a wɔde laminated ayɛ.
| Aguade a Wɔde Yɛ Adwuma | PVC Overlay film sini / PVC kaad Overlay film krataa / kaad lamination Overlay film |
| Atadeɛ | Nneɛma a ɛda adi pefee PVC |
| Nneɛma a ɛyɛ den | 0.04mm-0.15mm na ɛwɔ hɔ; 0.05mm, 0.08mm ne 0.10mm yɛ nea wɔtaa paw; customized thickness a ɛwɔ hɔ |
| Kɛseɛ | A4, A3 ne krataa a wɔayɛ no sɛnea wɔpɛ |
| Abasobɔde a Ɛwɔ Hɔ | Wɔakata so Overlay film , wɔakata so denneennen Overlay film , wɔakata so Overlay film , laserable Overlay film ne magnetic stripe Overlay film |
| Nneɛma a Wɔpaw wɔ Surface | Glossy, matte, transparent na wɔayɛ no sɛnea wɔpɛ wɔ soro ayaresa |
| Nwoma a Wɔatintim no Nhyiamu | Nneɛma a ɛfata a wɔde kata so ma offset, silk-screen, UV ne oxidative ink nhyehyɛe; wɔkamfo kyerɛ sɛ wɔnyɛ nneɛma a wɔyɛ no ho sɔhwɛ |
| Magnetic Stripe Nneɛma a Wɔpaw | HiCo / Nneɛma a Wɔde Yɛ Adwuma; 300 Oe, 600 Oe, 2750 Oe ne 3000 Oe a wobetumi apaw sɛnea adwuma no ahwehwɛde te |
| Nnwuma Titiriw a Wɔde Di Dwuma | ID kaad, sikakorabea kaad, RFID kaad, kwan a wɔfa so kɔ hɔ, asɔremma kaad, nokwaredi nkrataa, akyɛde kaad, ahɔhodan mu safe kaad ne smart card |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Ne kɛse, ne kɛse, ahoɔden a wɔde kata so, ne soro wie, magnetic stripe specification, packaging ne labeling |
Selecting the coating grade is a bonding decision , ɛnyɛ sɛ wobɛpaw sɛnea ɛbɛyɛ a ɛhyerɛn anaasɛ ɛyɛ matte kɛkɛ. Core a wɔatintim, ink chemistry, heat-press cycle ne peel ahoɔden a wɔhwehwɛ no na ɛkyerɛ Overlay film a ɛfata.
| Overlay film Grade | Best-Fit Card Production | Ahwehwɛde a ɛho hia |
|---|---|---|
| Standard a wɔde akata so PVC Overlay film | General ID, kwan, akyɛdeɛ ne asɔremma nkrataa a wɔde PVC cores a wɔatintim a ɛne no hyia di dwuma | Si so dua sɛ coating orientation, ink cure, peel ahoɔden ne pefeeyɛ akyi lamination. |
| Nneɛma a wɔde akata so denneennen PVC Overlay film | Card structures a standard coating ntumi mma bonding margin a ɛfata | Pene ink/adhesive a wɔaka abom pɛpɛɛpɛ so; hwɛ sɛ peel ahoɔden, bubbles ne onyin adwumayɛ. |
| Nea wɔmfa nkata so PVC Overlay film | PVC adansi a etumi de ho to ɔhyew bonding a enni adhesive layer | Kyerɛ fusion to core a wɔatintim ne nea wɔantintim nyinaa; hwɛ anoano mpaapaemu bere a woatwitwa awie no. |
| Magnetic nsensanee Overlay film | Kaad a ɛhwehwɛ sɛ wɔde magnetic recording area a wɔaka abom | Kyerɛ HiCo/LoCo grade, stripe gyinabea, encoder, akenkanfo ne bond ahoɔden. |
| Laser-mmuae grade titiriw | Nnwuma a ɛhwehwɛ sɛ wɔasɔ laser personalization ahwɛ wɔ nneɛma a edi mũ a ɛfata mu | Si laser-mmuae nnuruyɛ ne kaad nhyehyɛe pɔtee no so dua; a general PVC Overlay film nyɛ nea wotumi de laser nkyerɛw no ara kwa. |
PVC Overlay film film yɛ ade a ɛyɛ tratraa a ɛyɛ mmerɛw a wɔde si PVC kaad core a wɔatintim no atifi ne ase bere a wɔde hot-press lamination ayɛ. Sɛ wɔde ɔhyew ne nhyɛso a wɔahyɛ so di dwuma wie a, Overlay film no ne kaad no nipadua no bɔ na ɛyɛ ahobammɔ a ɛda adi pefee wɔ mfonini ahorow a wɔatintim, nsɛm, barcode, ahobammɔ agyiraehyɛde, antenna, chips, anaa magnetic stripe nhyehyɛe ahorow so.
Wɔ wɔn a wɔyɛ kaad no fam no, Overlay film grade a ɛteɛ no boa ma ɛtew peeling, bubbles, haze, surface scratches, kɔla distortion, ne delamination so. Ɛsɛ sɛ coating paw ne card core, ink nhyehyɛe, lamination mfiri, peel ahoɔden a wɔhwehwɛ, ne finished-card adwumayɛ gyinapɛn hyia.
Nsakraeɛ PVC Overlay film Sini
Mfonini a Ɛyɛ Petee ne Kɔla a Wohu
Lamination Adwumayɛ a Egyina pintinn
Coated PVC Overlay film ka adhesive layer a wɔayɛ sɛ ɛbɛma nkitahodi a ɛda ink layer a wɔatintim ne transparent Overlay film ntam no atu mpɔn. Ɛfata ma kaad nnwuma a ɛhwehwɛ sɛ wɔde wo ho to so a wɔde bata ho, ɛda adi pefee, na wɔde hot-press lamination a etu mpɔn.
Wɔpaw Overlay film a wɔakata so denneennen bere a ink nhyehyɛe anaa kaad adansi hwehwɛ sɛ wɔyɛ bonding adwuma a ɛkorɔn. Ɔfã biako ma ɛyɛ mmerɛw a wɔawie, bere a wɔayɛ ɔfã a wɔakata so no sɛnea ɛbɛyɛ a ɛbɛkyekyere kaad no mu ntini a wɔatintim no. Saa grade yi ho wɔ mfaso titiriw ma card structures a ɛyɛ den, magnetic stripe processing, ne applications a ɛho hia sɛ wɔko tia peeling.
Wɔde Overlay film a wɔmfa nkata so di dwuma bere a kaad no mu, ink, anaa adeyɛ nhyehyɛe no de bonding adwumayɛ a ɛdɔɔso ma dedaw. Ɛsɛ sɛ adetɔfo sɔ lamination ahoɔden, transparency, flatness, ne onyin adwumayɛ hwɛ ansa na wɔasi so dua sɛ wɔyɛ no pii.
Specialized laser-responsive Overlay film yɛ ade soronko grade ma kaad nhyehyɛe a wɔapaw; plain transparent PVC Overlay film nyɛ nea ɛfata ankasa ma laser nkyerɛwee. Si grade a wɔde ama no so dua na wie card construction. Wobetumi de magnetic stripe Overlay film ama HiCo anaa LoCo stripe options ama bank cards, hotel key cards, access cards, membership cards, ne encoded card applications afoforo.
Overlay film thickness ka card no ahobammɔ soro, ne nyinaa layer build-up ne lamination suban. Wɔtaa de sini no si PVC kaad a wɔatintim no anim ne akyi ; bu afã abien no nyinaa ho akontaa sen sɛ wobɛpaw anim Overlay film nkutoo.
| Nominal Overlay film Thickness | Common Selection Nteaseɛ | Safoa Hwɛ |
|---|---|---|
| 0.05mm / 50 μm na ɛwɔ hɔ | Nwoma a ɛyɛ tratraa a ɛbɔ ho ban wɔ baabi a wɔde ne kɛse pii ma kaad a ɛwɔ mu no | Film ho dwumadie, coating uniformity, mpɔtam hɔ chips ne soro wie. |
| 0.08mm / 80 μm na ɛwɔ hɔ | Ahobanbɔ a ɛkari pɛ wɔ soro ne kaad no mu duru nyinaa ma PVC kaad nhyehyɛe pii a wɔatintim | Anim/akyi symmetry, peeling, pefeeyɛ ne post-lamination nsusuwii. |
| 0.10mm / 100 μm na ɛwɔ hɔ | A ahobammɔ a ɛyɛ den bere a kaad a wɔaboaboa ano nyinaa ma ho kwan no | Lamination kyinhyia, bonding, curling ne compatibility ne card-personalization mfiri. |
| 0.04–0.15mm / Amanneɛbɔ | Ahobanbɔ a ɛfa adwuma pɔtee bi ho, kaad adansi ne nnwinnade a wɔde yɛ nneɛma | Si so dua ankasa ordered gauge, tolerance, krataa format ne sɔhwɛ gyinapɛn. |
Nsusuwii, akontaabu stack a enni laminated yɛ 0.08mm anim Overlay film + 0.30mm a wɔatintim core + 0.30mm a wɔatintim core + 0.08mm akyi Overlay film = 0.76mm . Eyi yɛ nhwɛso a ɛfa nneɛma a wɔyɛ no kɛse ho, na ɛnyɛ amansan nyinaa mu nneɛma a wɔyɛ. Kaad no mu duru ankasa sesa bere a ɔhyew, nhyɛso, coating flow, RFID inlays ne mpɔtam hɔ chip nhyehyɛe ahorow; bere nyinaa susuw nhwɛsode ahorow a wɔawie.
Kyerɛw film no mu duru a wɔfrɛ no, abodwokyɛre a wɔsusuu, kaad a wɔawie no duru wɔ mmeaeɛ pii, chip-zone nsakraeɛ, bow, curl ne ID-1 kaad anaa nnwinnadeɛ ahwehwɛdeɛ a ɛfa ho. Ɛsɛ sɛ wɔtɔn krataa grade pɔtee bi tia mfonini ne nhwɛsode a wɔapene so no nkutoo.
PVC wɔde resin frafra nneɛma a wɔapaw a wɔde ka ho ne nneɛma a ɛma ɛyɛ den, afei wɔyɛ ho adwuma ma ɛyɛ film a ɛyɛ tratraa a ɛyɛ mmerɛw denam kalenda anaa extrusion a wɔahyɛ so. Ɛdenam kaad a wɔhwehwɛ sɛ wɔde di dwuma so no, wobetumi ayɛ sini no ani, wɔde ade a wɔde nkata so akata so, wɔde laser ayɛ, de magnetic stripe nneɛma aka ho, na wɔatwitwa no ayɛ no nkratafa anaasɛ wɔayɛ no sɛnea wɔpɛ.
Sɛ wopɛ sɛ wɔyɛ nneɛma pii a ɛyɛ den a, ɛsɛ sɛ wɔsɔ Overlay film no hwɛ sɛ ɛtumi gyina ne kɛseɛ ano, ɛho tew wɔ soro, ɛyɛ nea ɛda adi pefee, nea wɔde kata so no yɛ pɛ, ɛgyina pintinn wɔ nsusuiɛ mu, bonding adwumayɛ, ne sɛdeɛ ɛne adetɔfoɔ no tintim ne lamination nhyehyɛeɛ no hyia.
Multi-Layer Card a Wɔde Sisi
RFID Kaad Core ne Overlay film Nhyiam
Adeyɛ a wotumi san yɛ no ho hia efisɛ Overlay film a ɛbata ho kɛse mpo betumi asɛe sɛ ɔfã a ɛnteɛ no hwɛ nea ɛwɔ mu no anaasɛ ink a wɔatintim no nnyaa ayaresa koraa a.
| Production Stage | Adwumayɛ Nhwehwɛmu a Wɔkamfo Kyerɛ |
|---|---|
| 1. Hwɛ nneɛma ne coating afã | Kyerɛ nneɛma a wɔde akata so ne nea wɔmfa nkata so, nneɛma a ɛbɔ ho ban (sɛ ɛwɔ hɔ a), krataa no kwankyerɛ ne lot nɔma. |
| 2. Siesie PVC cores a wɔatintim | Si ink cure, solvent yiyi, print-registration marks, flatness, soro ahotew ne core thickness so dua. |
| 3. Boaboa kaad a wɔaboaboa ano no ano | Fa anim Overlay film , printed core, optional RFID inlay, akyi core ne Overlay film hyia wɔ nhyehyɛe a wɔapene so no mu. |
| 4. Yɛ ɔhyew lamination | Fa press temperature, pressure, dwell, release plates ne heating profile a wɔagye atom no di dwuma ma saa nhyehyɛe pɔtee no. |
| 5. Onwini ne tebea | Kɔ so hwɛ onwini a wɔahyɛ so na ama asiw emu nhyɛso, curling ne laminated layers no mu mpaapaemu ntɛm ano. |
| 6. Punch na yɛ nea wopɛ | Sua kaad no mu duru ne ne kɛse; hwɛ anoano, soro ne encoding/printing adwumayɛ. |
| 7. pene nneɛma a wɔyɛ no so | Tu mmirika peel, visual, flatness ne functional checks tia signed sample ne adetɔ specification. |
Ɔhyew ne onwini kyinhyia a wɔhwehwɛ no gyina resin grade, coating, ink film thickness, press design ne stack sorokɔ so. Fa sɔhwɛ a wɔakyerɛw ho asɛm di dwuma wɔ mfiri a wɔde yɛ nneɛma no so; mfa obi foforo a ɔde nneɛma ma no hyew nni dwuma tẽẽ sɛ nhyehyɛe a wɔahyɛ ho bɔ.
Ɔfã a wɔakata so no hyɛ adhesion a ɛda printed card core ne Overlay film layer ntam no ho nkuran, ɛboa ma wɔtew lifting, edge separation, bubbles, ne delamination so bere a coating grade ne lamination parameters no hyia yiye no.
High-transparency Overlay film bɔ mfonini a wɔatintim ho ban bere a ɛkura kɔla a wotumi hu, nsɛm a wɔkenkan yiye, barcode a emu da hɔ, ne ɔfasu a ɛyɛ hyerɛnn anaa matte a wɔawie a ɛyɛ torotoro.
Overlay film no na ɛyɛ kaad no akyi ahobammɔ fã, na ɛboa ma nsɛm a wɔatintim no gyina sɛnea wɔde di dwuma daa, akasakasa, nsensanee, nsuo, efĩ, ne ɔsom mu ntadeɛ a ɛyɛ daa no ano.
Adetɔfo betumi akyerɛ ne kɛse, krataa kɛse, nea wɔawie, ahoɔden a wɔde kata so, magnetic stripe type, ɔkwan a wɔfa so de nneɛma gu mu, ne nea wɔde kyerɛw so sɛnea kaad no nhyehyɛe, ɔkwan a wɔfa so tintim, laminator, sɛnea wɔatwa, ne dodow a wɔkra no te.
High Transparency ne Gloss a Ɛyɛ Fɛ
Multi-Layer Ahobammɔ a ɛtra hɔ kyɛ
Wallis de akwan horow a wɔfa so kata kaad no mu nneɛma a wɔde offset, silk-screen, UV , ne oxidative ink nhyehyɛe atintim no ma. Esiane sɛ ink chemistry, drying tebea, print coverage, core material, lamination temperature, pressure, ne cycle time betumi aka bonding nti, ɛsɛ sɛ wɔpene production sample so ansa na wɔakra pii.
Si so dua sɛ ebia ɔfã a wɔatintim no hia sɛ wɔtaa kata so anaasɛ wɔde kata so denneennen anaa.
Hwɛ sɛ ɛyɛ nea ɛda adi pefee, ɛyɛ ahum, ɛhyerɛn wɔ soro, ne kɔla a ɛsan yɛ foforo wɔ lamination akyi.
Sɔ peel ahoɔden, edge bonding, bubbles, warping, ne onyin adwumayɛ hwɛ.
Fa Overlay film kɛseyɛ ne botae a wɔawie-kaad no mu duru ne layer nhyehyɛe hyia.
Si magnetic stripe gyinabea, coercivity, ne trɛw, ne bonding ahwehwɛde ahorow so dua bere a ɛfata.
Eyinom yɛ mmeae a wofi ase hwehwɛ yare mu ma adwumayɛbea ahorow a wɔyɛ kaad. Ɛsɛ sɛ wɔde nhwɛsode a wɔahyɛ so di nteɛso adeyɛ a etwa to no ho adanse sen sɛ wɔbɛsesa lamination parameters pii prɛko pɛ.
| a Wɔahu a Ɛbɛyɛ sɛ Ɛde Ba | Mfomso | Nea Ɛsɛ sɛ Wodi Kan Hwɛ |
|---|---|---|
| Edge peeling anaasɛ delamination | Bonding a ɛnnɔɔso, coating anaa ink a ɛnhyia, ɔhyew anaa nhyɛso a ɛnnɔɔso | Hwɛ sɛ coating afã, ink cure ne susuw peel ahoɔden akyi conditioning. |
| Bubbles anaasɛ dwetɛ a wɔde yɛ nneɛma | Mframa anaa nsu a akyea, adhesive flow a ɛmfata anaasɛ core a efĩ wom | Hwɛ sɛnea ɛyɛ dryness, krataa no ho tew, stack ahosiesie ne heating profile. |
| Mununkum a ɛda adi / haze | Film grade a ɛnhyia, efĩ a ɛwɔ soro anaasɛ nea wɔyɛ no boro so | Fa virgin film toto laminated nhwɛsode ho; hwɛ mmeae a ɛne ne ho di nkitaho ne ɔhyew ankasa. |
| Kaad bow anaa curl | Anim/akyi gauge a ɛnkari pɛ, ɔhyew a ɛnteɛ anaasɛ onwini a wontumi nni so | Hwɛ stack symmetry, mprɛte a ɛyɛ tratraa ne onwini nhyɛso. |
| Scratches / mprɛte agyiraehyɛde ahorow | Press mprɛte a ɛho agu fĩ, abrasive handling anaasɛ release sheets a ɛmfata | Hwɛ mprɛte, ahotew, interleaving ne packaging. |
| Kɔla a wɔsakra anaasɛ tintim a wɔsɛe no a wotumi hu | Ink a ɛnnya ayaresa koraa, ɔhyew nhyɛso anaasɛ coating–ink nkitahodi | Sɔ ink a wɔatintim hwɛ denam grades foforo ne cure/lamination cycles a wɔayɛ mu nsakrae so. |
| Magnetic stripe encoding no di nkogu | Nhyɛso a ɛnteɛ, stripe gyinabea a ɛnteɛ anaasɛ ɔsɛe bere a wɔreyɛ ho adwuma | Hwɛ stripe specification pɛpɛɛpɛ, laminator alignment ne encoder/reader aba. |
PVC Overlay film bɔ adwumayɛfoɔ ID kaad, asuafoɔ kaad, kwan a wɔfa so kɔ hɔ so kaad, nsrahwɛfoɔ kaad, ne aban anaa ahyehyɛdeɛ kaad a ɛhia sɛ wɔyɛ ankorankoro ma pefee ne da biara da dwumadie a wɔde di dwuma a wɔtumi de ho to so ho ban.
Coated ne magnetic stripe Overlay film options boa card structures a ɛhia surface ahobanbɔ ka ho ne HiCo anaa LoCo magnetic data dwumadie.
PVC Overlay film betumi ayɛ laminated wɔ RFID anaa NFC inlay structures so de abɔ tintim ho ban na aboa ma wɔayɛ smart card a wɔawie a ɛyɛ pintinn ama kwan a wɔfa so nya kwan, nkyerɛkyerɛmu, akwantuo, nokwaredi, ne agyapadeɛ-hwɛ nhyehyɛeɛ.
Clear glossy anaa matte Overlay film ma aguadi nkrataa a adetɔnfo, ahɔhodan, akuw, anigyede mmeae, sukuu, akwahosan ho adwumayɛfo, ne nnwuma a wɔyɛ adwuma de di dwuma no nkyerɛkyerɛmu ne ne som nkwa nna tu mpɔn.
Kaad a Wɔatintim
ID ne Access Cards a Wɔde Di Dwuma
Ahobammɔ a Ɛda Hɔ a Ɛda Hɔ
PVC , PETG ne polycarbonate ( PC ) Overlay film sini ahorow no yɛ kaad-nneɛma nhyehyɛe ahorow a ɛsono emu biara dea. Ɛnsɛ sɛ wɔde si ananmu esiane sɛ nkratafa no mu duru anaa nea ɛda adi te saa ara nti.
| Nneɛma | a Wɔtaa De Di Dwuma | Paw Asiane |
|---|---|---|
| PVC Overlay film | General-purpose PVC ID, nokwaredi, kwan a wɔfa so nya ne akyɛde kaad adansi | Match PVC core, print ink, coating ne ɔhyew bonding nhyehyɛe. |
| PETG Overlay film | PETG ne kaad nhyehyeɛ a wɔapaw a wɔabom ayɛ | Sɔ interlayer adhesion, ɔhyew mmuae, card flatness ne print compatibility hwɛ. |
| Polycarbonate Overlay film | Higher-durability multilayer PC credentials, a laser-personalized adansi a ɛfata ka ho | Hwɛ PC -to- PC bonding na fa laser-responsive grade a wɔatu ho ama di dwuma bere a ɛho hia sɛ wɔyɛ engraving. |
Kyerɛkyerɛ kaad nhyehyɛe mu: Si so dua sɛ ade titiriw no, nea wɔatintim no, inlay, chip, magnetic stripe, ne botae a wɔawie no kɛse.
Kyerɛ ɔkwan a wɔfa so tintim: Kyɛ ink no su, printa, ɔkwan a wɔfa so tintim, ne tintim a wɔde kata so sɛnea ɛbɛyɛ a wobetumi de coating grade no ahyia.
Si lamination nhyehyɛe no so dua: Fa laminator su, ɔhyew kwan, nhyɛso, kyinhyia bere, ne ɔkwan a wɔfa so yɛ onwini ma.
Kyerɛ adwumayɛ ho ahwehwɛde ahorow: Fa nea ɛda adi pefee, ɛhyerɛn, ahoɔden a ɛwɔ peel, abrasion resistance, flatness, onyin, ne ahobammɔ ahwehwɛde ahorow ka ho.
Pene nhwɛsode ahorow so: Sɔ tintim, lamination, twa, personalization, ne card adwumayɛ a etwa to hwɛ ansa na wɔayɛ no pii.
Sɛ wopɛ sɛ woka nsɛm a ɛyɛ pɛpɛɛpɛ a, fa wo nneɛma a wopɛ, ne kɛse, krataa kɛse, ɔkwan a wɔfa so kata so, nea wɔde wie, ɔkwan a wɔfa so tintim, sɛnea wɔde di dwuma, afe afe dodow, ne nhwɛsode-sɔhwɛ ahwehwɛde ahorow mena Wallis.
Wɔ export orders ho no, reference sample a wɔapene so ne specifications a wɔatwerɛ no ho wɔ mfasoɔ sene generic claim sɛ Overlay film no fata production line biara. Ɛsɛ sɛ nea ɔtɔ ne nea ɔde nneɛma ma no pene nsɛm a edidi so yi so ansa na wɔayɛ nneɛma dodow.
| Adetɔfo Ahwehwɛde Ho | Nsɛm a Ɛsɛ sɛ Wosi So dua |
|---|---|
| Overlay film nkyerɛkyerɛmu | PVC resin/grade, a wɔde akata so/a wɔakata so denneennen/wɔankata so, nominal gauge, thickness tolerance, gloss/matte finish. |
| Krataa ne nhyehyɛe | A4, A3 anaa ne tenten pɛpɛɛpɛ × ne tɛtrɛtɛ, ɔkwan a wɔfa so, nea wotumi twa, nkratafa biara a wɔde ayɛ stack ne carton. |
| Print ne kaad a wɔde ahyɛ mu | PVC core model, ink type, curing tebea, card layers, RFID inlay anaa magnetic stripe afã horow. |
| Lamination mfiri a wɔde yɛ adwuma | Machine type, ɔhyew ne onwini profile, nhyɛso, tra, mprɛte ne release film. |
| Nhwehwɛmu a wɔde ani ne nea wɔde aniwa hu | Transparency/haze, surface scratch, tuntum spots, wrinkles, ano tebea ne kɔla nkɛntɛnso a wɔapene so. |
| Bonding ne finished-card sɔhwɛ ahorow | Defined peel kwan ne anohyeto, bubble ne warpage gye, wie gauge, bending / abrasion bere a ɛho hia. |
| Magnetic stripe a wɔpaw | HiCo/LoCo coercivity, stripe trɛw ne gyinabea mfonini, encoder ne akenkanfo sɔhwɛ aba. |
| Nhyehyɛe ne sɛnea wotumi hwehwɛ nneɛma mu | Nhwɛsoɔ dodoɔ, MOQ, dodoɔ a wɔahyɛ ho nkɔm, lot agyiraeɛhyɛdeɛ, packing nhyehyɛeɛ ne nkrataa a wɔhwehwɛ a ɛkyerɛ sɛ wɔdi mmara so. |
Ɛsɛ sɛ wɔde kaad no mu ntini a wɔatintim ne nea wɔyɛ no kyinhyia a wɔahyɛ da ayɛ no laminated Overlay film nhwɛsode bi. Pene sɛnea ɛte, bonding, punching, finished-card dimensions ne magnetic anaa contactless dwumadie biara so ansa na woasi repeat-order specification so dua.
PVC Overlay film wɔde nkratafa ahyɛ mu ma de tew mfutuma, nsuo, anoano a ɛsɛe, ne kankyee so wɔ amanaman ntam akwantuo mu. Standard export packing betumi ayɛ ahobammɔ PE film, nsu-resistant kraft nneɛma, cartons anaa pallets, ntwea so ahobammɔ, stretch wrapping, ne customized labels.
Nneɛma a Wɔde Kɔ Amannɔne a Wɔabɔ Ho Ban
Palletized Wiase Nyinaa Nneɛma a Wɔde Fa Nneɛma Kɔ
Wallis boa kaad ayɛfo, nnwumakuw a wotintim nhoma, smart card adwumayɛbea ahorow, wɔn a wɔkyekyɛ, ne OEM nnwuma denam PVC Overlay film ano aduru a wɔayɛ no sɛnea wɔpɛ, nhwɛsode sɔhwɛ, nneɛma a wɔyɛ ho nhyehyɛe, nneɛma a wɔde kɔ amannɔne, ne mfiridwuma mu nkitahodi a ɛyɛ mmuae so.
Osuahu a ɛfa plastic krataa ne kaad-nneɛma a wɔde ma adetɔfo a wɔyɛ nneɛma ho nhyehyɛe ho.
Nneɛma a wɔyɛ no ntam nkitahodi, ahwehwɛde mmoa ne scalable bulk supply a egyina order ahwehwɛde ahorow so.
Amanneɛ kwan so thickness, kɛse, coating, wie, stripe specification, packing, ne labelling.
Nhwɛsode mmoa a wɔde tintim, lamination, bonding, ne finished-card evaluation.
Gyinabea baako sourcing mmoa ma PVC , PET , PETG , PC , Overlay film , core krataa, inlay, ne kaad nneɛma a ɛfa ho.
Wallis Kuw no
Wiase Nyinaa B2B Adetɔfo
Wallis Adwumayɛbea
Fa wo kaad nhyehyɛe, ink nhyehyɛe, Overlay film kɛse, krataa kɛse, nea wɔde kata so, nea wɔde bedi dwuma, ne dodow a wɔasusuw sɛ wobɛkra no mena. Wallis bɛboa wo ma woasusuw nneɛma a ɛfata ne nhwɛsode-sɔhwɛ nhyehyɛe no ho.
Wo ne Wallis Kaad nneɛma Onimdefo bi nkasaPVC Overlay film film no wɔde laminated wɔ plastic card cores a wɔatintim so de bɔ mfonini ne data ho ban, ma ne soro hwɛbea tu mpɔn, ɛma abrasion resistance yɛ kɛse, na ɛhyɛ card nhyehyɛe a wɔawie no den.
Coated Overlay film ka adhesive layer a ɛma bonding to printed card cores no tu mpɔn. Overlay film a wɔmfa nkata so no de ne ho to sɛnea nneɛma a wɔde gyina so ne lamination nhyehyɛe no hyia so kɛse. Wɔpɛ Overlay film a wɔde kata so denneennen bere a ahoɔden a ɛkorɔn a wɔde peel anaasɛ ink a ɛne ne ho hyia a ɛyɛ den ka ho.
Wallis de PVC Overlay film ma fi bɛyɛ 0.04mm kosi 0.15mm, a nea wɔtaa paw a 0.05mm, 0.08mm, ne 0.10mm ka ho. Customized thickness betumi asusuw sɛnea card nhyehyɛe ne botae awie thickness.
Aane. Standard A4 ne A3 akɛseɛ wɔ hɔ, na wobetumi ayɛ krataa no nsusuwii a wɔayɛ no sɛnea wɔpɛ, sɛnea wɔatwitwa, nneɛma a wɔde kyekyere, ne nkyerɛwde ahorow ama nhama ahorow a wɔde yɛ kaad.
Nneɛma a ɛfata a wɔde kata so wɔ hɔ ma offset, silk-screen, UV , ne oxidative ink nhyehyɛe a wɔtaa de di dwuma. Esiane sɛ ɛsono sɛnea wɔde ink yɛ ne tebea horow a wɔde sa yare nti, ɛsɛ sɛ adetɔfo sɔ nhwɛsode a wɔatintim ankasa hwɛ ansa na wɔasi nea wɔde kata so ne nea wɔkra no kɛse so dua.
Ebia cross-material lamination betumi ayɛ yiye denam coating ne ɔkwan a ɛfata so, nanso sɛnea ɛne no hyia no gyina substrate, ink, adhesive chemistry, ɔhyew, nhyɛso, ne card nhyehyɛe so. Ɛsɛ sɛ wɔsɔ nhwɛsode hwɛ ansa na wɔayɛ no pii.
Aane. Wobetumi de HiCo anaa LoCo nhyehyeɛ ayɛ magnetic stripe Overlay film , a coercivity specifications ahodoɔ, stripe gyinabea, trɛw, kɔla, ne card dwumadie ka ho.
Ɛsɛ sɛ wogyina ink a wɔatintim, card core, ahoɔden a wɔhwehwɛ wɔ peel, magnetic stripe process, ne lamination tebea so na ɛpaw. Wɔtaa susuw ade a wɔde kata so denneennen bere a ade a wɔde kata so a wɔahyɛ da ayɛ no mma mma bonding margin a ɛdɔɔso no.
Aane. Wɔkamfo kyerɛ sɛ wɔnyɛ nhwɛsode sɔhwɛ de hwɛ sɛ tintim no hyia, bonding, ɛda adi pefee, ɛyɛ tratraa, magnetic stripe processing, twa, personalization, ne finished-card durability ansa na wɔayɛ no pii.
Yɛsrɛ sɛ fa nneɛma, ne kɛse, krataa kɛse, ade a wɔde kata so, nea wɔde wie, ink ne ɔkwan a wɔfa so tintim, kaad a wɔde di dwuma, magnetic stripe a wɔhwehwɛ, dodow a wɔasusuw, nea wɔde kyekyere nneɛma a wɔhwehwɛ, ne baabi a wɔde wɔn ani asi so sɛ wɔde bɛkɔ no ma.
Ɛnyɛ nea ɛho hia ankasa. A coating a ɛyɛ den ho wɔ mfaso bere a ink, core ne lamination nhyehyɛe no hia bonding margin foforo nkutoo. Sample peel testing na ɛkyerɛ grade a ɛfata.
Fa nea ɔde nneɛma ma no kwankyerɛ anaa ayaresa agyiraehyɛde ne nhwɛsode a wɔapene so di dwuma. Mfa no sɛ sɛnea ɛte nkutoo na ɛma wohu anim a wɔde ntama akata so no wɔ ɔkwan a wotumi de ho to so.
Asymmetric card stack yɛ nea wobetumi ayɛ wɔ mfiridwuma mu, nanso ebetumi ama curling akɔ soro anaasɛ ɛbɛsesa nea wɔawie no kɛse. Validate anim/akyi balance wɔ card design ankasa no so.
Wɔayɛ ID-1 plastic kaad pii atwa 0.76mm adansi a wɔfrɛ no 0.76mm ho ahyia, nanso ɛsɛ sɛ abodwokyɛre a wɔma ho kwan ne ne kɛse a wɔawie no di adwuma ne printa ahwehwɛde a ɛfata no akyi.
Nea ebetumi de aba no bi ne coating-to-ink a ɛnyɛ nea ɛfata, ink a ɛnyɛ yiye, lamination tebea a ɛmfata anaa mfiri mu nhyɛso. Sua peel ahoɔden wɔ conditioned wie cards.
Mframa, nsuo, efĩ, nneɛma a wɔde kata so a ɛnkɔ yie anaasɛ ɔhyew a ɛnhyia betumi ama ahurututu aba. Hwɛ nneɛma a wɔaboaboa ano nyinaa ne press tebea horow no mu.
Ɛnyɛ nea ɛba ara kwa. Laser mmuae gyina nneɛma a wɔahyira so a wɔayɛ ne kaad adansi a edi mũ so. Sɛ wopɛ laser-personalized credentials a ahobammɔ wom a, hwehwɛ PC anaasɛ specialty-grade nhyehyɛe a ɛfata a ɛfata mu.
Ɛtɔ da bi a wobetumi de nneɛma soronko a wɔde kata so ayɛ cross-material bonding, nanso PVC , PETG ne PC wɔ dwumadie mfɛnsere ahodoɔ. Fata stack ankasa no sen sɛ wobɛfa no sɛ substitution.
Ɛboa ma wɔbɔ mfonini ahorow a wɔatintim ho ban fi sɛnea wɔde di dwuma daa ne nsu a ɛyɛ nwini ho; ɛnyɛ nea ɛkyerɛ sɛ nsu ntumi nkɔ mu anaasɛ ahobammɔ a ɛrentumi nsɛe no. Kaad a edi mũ no hia sɛ wɔyɛ nneɛma a atwa yɛn ho ahyia ne ahobammɔ ho sɔhwɛ a ɛfa adwuma pɔtee bi ho.
PVC kaad Overlay film a wɔde yɛ mfiridwuma mu ɔhyew pressing no wɔde ahyɛ multilayer card stack mu, bere a wɔde post-issuance self-adhesive laminate ahyɛ kaad a wɔayɛ dedaw so. Wɔde akwan horow di dwuma na ɛnsɛ sɛ wɔsesa wɔn ho wɔn ho.
Ma wɔn ho ntew, ɛnyɛ petee, bɔ ho ban mfi ɔhyew ne mfutuma ho, na fa nsɔano anaa kyekyere sɛnea grade a woapaw no te. Tebea nkrataa a ɛwɔ beae a wɔyɛ nneɛma ansa na wɔde adi dwuma bere a ɛsono sɛnea wɔkora nneɛma ne adwumayɛbea tebea horow no.
Kyerɛ nneɛma grade, thickness tolerance, dimensions, optical appearance, bonding sɔhwɛ kwan, sintɔ anohyeto, sampling nhyehyɛe, packaging ne lot traceability; fa nea wɔyɛ no toto nhwɛsode ahorow a wɔapene so ho.
