|
Wallis - PET shit
Wallis we nem Wallis
PET shit
| MOQ: | |
|---|---|
| Kɔlɔ: | |
| Tik: | |
| Aplikeshɔn: | |
| Matirial: | |
| Kwantiti: | |
Wallis klia PET sheet film fɔ print folding bɔks na transparent rigid pak matirial we dɛn divɛlɔp fɔ klia plastic katon, kɔsmɛtik bɔks, ilɛktronik pak, gift pak, fud-display pak ɛn ɔda rital aplikeshɔn dɛn we nid fɔ mek yu si di prɔdak ay ɛn fɔ print am we yu want.
Dɛn mek am fɔ pak kɔnvɔta, printin kɔmni, fɔlding-katɔn manifakta, day-kat faktri ɛn brand pak saplay, Wallis PET shit kin saplae insay rol ɔ kɔt shit ɛn kɔstɔmayz bay tik, wit, shit dimɛnshɔn, kɔlɔ, transparency ɛn sɔfa-tritmɛnt rikwaymɛnt.
Fɔ mek klia folding-bɔks prodakshɔn, matirial sɛlɛkshɔn fɔ tink bɔt mɔ pas transparency nɔmɔ. Printin tritmɛnt, ink adheshon, sheet stiffness, day-cutting akkuracy, kris jɔyometri, fold waytin, ribaund, glu kɔmpatibiliti ɛn finish-bɔks apinans ɔl de inflɔws prodakshɔn pefɔmɛns. So dɛn fɔ tɛst di ripɔt matirial bay we dɛn yuz di kɔstɔma in aktual printin ɛn kɔnvɔyt prɔses bifo dɛn gi am bɔku aprɔval.
| Spesifikasi | Wallis Opshɔn | B2B Kɔnfɔmeshɔn Point |
|---|---|---|
| Tin dɛn | PET / klia rigid PET shit ɔ fim | Kɔnfɛm PET gred akɔdin to fɔlding, printin ɛn pak aplikeshɔn |
| Kɔlɔ | Transparent standad; wi kin tɔk bɔt wayt, rɛd, blak ɛn kɔstɔmayt kɔlɔ dɛn | Apruv transparency, tint ɛn kɔlɔ agens wan fizik sampul |
| Tiknɛs Rɛnj | 0.15–3.0 mm ɔ we dɛn kɔstɔmayt | Fɔlding-bɔks gej fɔ pik akɔdin to di bɔks saiz, rigiditi ɛn kris pefɔmɛns |
| Di Sayz dɛn fɔ di Shit dɛn we dɛn dɔn List | 700 × 1000 mm / 1000 × 2000 mm / 1220 × 2440 mm ɔ we dɛn kɔstɔmayt | Match printin pres, day-katin layout ɛn matirial yutilizeshɔn |
| Rol Width we yu de yuz | lεk 50–1280 mm כ we dεn kכstכm, we de sכbjεkt to tik εn slitin spεsifikεshכn | Kɔnfɔm di rol lɔng, kɔr, ɔta dayamita ɛn maksimal rol wet |
| Fɔmat fɔ di Sapɔt | Rol ɔ kɔt sheet | Pik akɔdin to di tin dɛn we dɛn kin yuz fɔ print ɛn kɔnvɔyt |
| Optik Rikwaymɛnt | Ha-klariti transparent apinans; haze ɛn optik limit dɛn we de ɔnda di prɔjek spɛsifikɛshɔn | Difayn haz, tint, blak spat, kristal poynt ɛn visible surface-defect akseptans we i krichɔ |
| Di Tritmɛnt fɔ Print | Korona, kotin ɔ printin-grɛd sɔfayz tritmɛnt kin rivyu akɔdin to di ink sistɛm | Spɛsifik printin sayd, ink kemistri ɛn rikwayd sɔfayz ɛnaji |
| Di We Aw Dɛn De Print | UV ɔfset, skrin, fleksografik ɛn dijital printin kin evalyu wit kɔmpitabl PET gred ɛn tritmɛnt | Kɔndɔkt ink-adhesion ɛn curing tɛst bifo bɔku bɔku prodakshɔn |
| Fɔ chenj pɔsin | Print, day kɔt, kris, fold, bɛnd, glu ɛn pak kɔnvɔshɔn | Validate komplit dieline ɛn finish-bɔks strɔkchɔ |
| Aplikeshɔn dɛn | Klia folding bɔks, print plastic katon, kɔsmɛtik pak, ilɛktronik pak, gift bɔks, rital displei pak ɛn sɔm it aplikeshɔn dɛn | Yuz fɔ it-kɔntakt nid di gred we yu fɔ gɛt ɛn di sɔpɔtin dɔkyumɛnt dɛn |
| MOQ we gɛt fɔ du wit am | Tipik MOQ: pas 100 kg | Kɔlɔ, kɔtin ɛn dimɛnshɔn dɛn we dɛn kɔstɔmayt kin nid difrɛn MOQ |
Tiknes klarifyeshɔn: Di standad tiknes rɛnj fɔ dis folding-bɔks PET shit na 0.15–3.0 mm, wit kɔstɔmayz gej dɛn we de ɔnda di prodakshɔn fisibiliti. Rikwaymɛnt dɛn we de ausayd dis rɛnj fɔ kɔnfɔm sɛpret bifo dɛn kot.
Klia PET folding-box sheet na rigid ɔ sɛmi-rigid transparent polyester matirial we dɛn kin chenj to plastic katon tru printin, day kɔt, kris ɛn fold. Nɔ lɛk blista ɔ tre we dɛn mek wit tɛm, katɔn we dɛn kin fold kin bigin lɛk flat sheet we dɛn kin kɔt to daylayn ɛn afta dat dɛn kin gɛda am fɔ mek i bi tri-dimɛnshɔnal paket.
Transparent PET de alaw di prodak fɔ kɔntinyu fɔ si tru bɔku ɔ ɔl di katon. Dis na patikyula yusful fɔ kɔsmɛtik, tɔys, ilɛktronik aksesɔri, gift ɛn rital prodak usay dairekt prodak visibiliti de sɔpɔt mɛkshɛniz.
Dɛn kin pripia PET gred dɛn we dɛn dɔn pik fɔ print so dɛn kin jɔyn logo, prɔdak infɔmeshɔn, dɛkɔretiv grafik, opaque wayt eria ɛn prɔmoshɔnal dizayn wit transparent panɛl dɛn.
Bɔku tɛm, dɛn kin ship ɔ kip bɔks dɛn we dɛn kin fold flat bifo dɛn dɔn gɛda dɛn fayn fayn wan, we kin mek dɛn yuz di ples fayn we yu kɔmpia dɛn wit ful-fɔm rigid pakej dɛn. Aktual pak efyushɔn dipen pan di bɔks strɔkchɔ ɛn di kɔstɔma filin prɔses.
Klia PET de mek di wan dɛn we de bay inspɛkt di prɔdak we dɛn pak we dɛn nɔ opin di katon. Fɔ visibiliti-kritikal projɛkt, optik kwaliti fɔ kɔntrol tru agrimɛnt limit fɔ haz, tint, surface skrat, blak spat ɛn ɔda visible defects.
PET sheet de gi di stiffness we nid fɔ bɔku transparent rital bɔks dɛn we i de stil tin fɔ mek dɛn day kɔt ɛn kris. Di kɔrɛkt gej dipen pan di bɔks dimɛnshɔn, di prɔdak wet, di dizayn fɔ kloz ɛn di panɛl rigiditi we yu want.
PET nɔ de absɔb mɔstɔ di sem we lɛk kɔvɛnshɔnal pepabɔd. Bɔt di paket we dɔn dɔn nɔ fɔ ɔtomɛtiks diskraib as watapruf bikɔs di sim, opin, print eria ɛn klos de afɛkt di kɔmplit paket.
Print logo, prodak diskripshɔn, dɛkɔretiv patɛn ɛn opaque kala zon kin kam togɛda wit transparent eria fɔ balans branding ɛn prodak visibiliti.
PET gred dɛn we dɛn pik kɔrɛkt wan kin chenj to tuck-end katon, ɔto-lɔk-bɔt bɔks, lid-ɛn-bɛs strɔkchɔ ɛn ɔda folding-bɔks dizayn. Tul jɔyometri ɛn prɔses kɔndishɔn fɔ bi ɔptimayz fɔ di gej we dɛn dɔn pik.
PET printabiliti dipen pan sɔfayz kɔndishɔn, ink kemistri ɛn di we aw i de mɛn. If dɛn nid fɔ gɛt korona ɔ ɔda tritmɛnt, dɛn fɔ no di say we dɛn dɔn trit ɛn protɛkt am tru slit, kɔt sheet ɛn print.
UV ɔfset printin kin gi ditayla grafik ɛn efishɔnal prodakshɔn fɔ big fɔl-bɔks rɔn we di PET sɔfays, ink sistɛm ɛn kɔriing kɔndishɔn dɛn kɔmpitabl. Dɛn fɔ chɛk di ink adheshon afta i dɔn wɛl ɛn afta dɛn dɔn fold am afta dat.
Skrin printin na yusful fɔ spat kɔlɔ, opaque wayt layers ɛn sɔm dɛkɔretiv ifɛkt dɛn. Ink tik ɛn di kɔndishɔn fɔ mɛn bikɔs dɛn bil pasmak ink kin afɛkt fɔ fold ɔ krak na kris layn dɛn.
Kɔmpatibl dijital prɔses kin sɔpɔt protɔtayp, pɔsnalayz pak ɛn shɔt prodakshɔn rɔn. Di wan dɛn we de bay fɔ chɛk if ink adheshon ɛn di we aw dɛn de si am na di PET gred we dɛn dɔn pik.
Fleksografik printin kin fayn fɔ rol-fed ɔ ay-volyum pak aplikeshɔn we di PET sɔfayz tritmɛnt, ink ɛn drying ɔ curing sistɛm mach to di prɔses.
CMYK ink dɛn we dɛn print dairekt pan transparent plastic kin tan lɛk se dɛn translucent pas aw dɛn go tan lɛk pan wayt pepabɔd. Yu kin print wayt ink ɔnda sɔm grafik dɛn we yu dɔn pik fɔ mek yu gɛt mɔ opasiti ɛn fɔ mek di kɔlɔ difrɛn.
Atwok kin bay wilful fɔ lɛf pat dɛn pan di PET we dɛn nɔ print am ɔl fɔ mek transparent winda dɛn we de sho di prɔdak insay.
Logo, prodak infɔmeshɔn ɛn dɛkɔretiv panɛl dɛn kin yuz wayt ɔndaprintin we di eria dɛn we de rawnd de stil klia. Dis de gi dizayna dɛn mɔ kɔntrol pan di balans bitwin visibiliti ɛn branding.
Rivas printin kin put grafik na di insay safa so di PET insɛf de ɛp fɔ protɛkt di pikchɔ we dɛn print frɔm dairekt ɛkstirian kɔntakt. Atwok oriɛnteshɔn, wayt layers ɛn glu lokeshɔn fɔ tink bɔt bifo prodakshɔn.
Di lɔ dɛn fɔ kɔt, prɛshɔn ɛn di tik we di shit tik fɔ mach so dat di ed dɛn go kɔntinyu fɔ klin ɛn di dimɛnshɔn dɛn de insay di katɔn tolɛreshɔn we dɛn nid. Pɔr tul kin mek bur, krak ɔ inkɔnsistɛns bɔks jɔyometri.
Kris na wan pan di impɔtant tin dɛn we dɛn kin du fɔ mek transparent plastic katon. Kris dip, rul wit, chanɛl jɔyometri ɛn PET tiknɛs inflɔws fɔlding fɔs ɛn finish apinans.
if yu strεs pasmak na di say we yu de, i kin mek yu wayt we yu kin si along wan transparent fold. Di matirial, kris jɔyometri, tɛmpracha ɛn bɛnd rayus fɔ so ɔptimayz yuz di kɔstɔma in aktual daylayn.
Shap fold ɔ kɔndishɔn we nɔ fayn fɔ skɔ kin mek krak krak na sɔm PET kɔnstrɔkshɔn dɛn. Bifo yu prodyuz bɔku bɔku wan, inspɛkt di sɛmpul dɛn we dɛn dɔn fold afta yu dɔn opin dɛn ɛn gɛda dɛn bɔku tɛm usay i fayn.
Plastik katon dɛn kin tray fɔ go bak to dɛn flat shep afta dɛn dɔn bɛn. Prɔpa kris pripiamɛnt de ɛp fɔ kɔntrol ribaund ɛn sɔpɔt skwea bɔks asɛmbli.
Adhesive pefomans dipכnt pan PET surface kondishכn, adhesive kεmεstri, glu εria, kכryu tεm εn pak envayroment. Di adhesive we dɛn bin want fɔ tɛst fɔ tɛst pan di aktual PET matirial bifo dɛn prodyuz am.
Print, varnish ɔ ɔda tritmɛnt dɛn we de na di glu eria kin chenj di trɛnk we di bon gɛt. Dielines fɔ no klia wan di glu zon dɛn so dat dɛn go ebul fɔ kɔntrol di printin ɛn kɔtin di rayt we.
Sɔm bɔks dizayn dɛn kin yuz tuck tab, ɔto-lɔk bɔt ɔ ɔda mɛkanikal strɔkchɔ dɛn we kin ridyus ɔ pul sɔm glu jɔyn dɛn. Di aprɔpriet dizayn dipen pan di prɔdak in wet, di we aw dɛn de fil ɛn di tin dɛn we dɛn nid fɔ sɛl.
| Bɔks Strukchɔ | Tipik Karakta | we Baya fɔ Kɔnfɔm |
|---|---|---|
| Tuk-Ɛnd Bɔks | Simpul top ɛn bɔt tuck flap dɛn | Prodakt wet, kloz sikyɔriti ɛn asɛmbli we |
| Ɔto-Lɔk Bɔt | Bottom locks during assembly fɔ mek dɛn sɔpɔt am fayn | Bod stiffness, lod en otomatik pak kompitibiliti |
| Lid-ɛn-Bayz Strukchɔ | Separet ɔ intagreted kɔva prɛzɛntɛnshɔn | Fit tolɛreshɔn ɛn dimɛnshɔnal stebiliti |
| Displei Bɔks we Dɛn Hang | Inklud huk ɔ hanger ficha | Lod we de hang ɛn riinfɔsmɛnt fɔ ol |
| Haybrid PET + Pepabɔd | Kɔmbayn transparent PET visibiliti wit print pepabɔd kɔmpɔnɛnt dɛn | Adhesive kompitibiliti, risaykul dizayn ɛn asɛmbli |
Klia PET katon kin sho skinkeya, kɔsmɛtik, biuti aksesɔri ɛn pɔsin-keya prɔdak dɛn we dɛn de kɔba transparent eria dɛn wit print branding.
Kebul, chaja, ɛdfɔn, smɔl ilɛktronik aksesɔri ɛn ɔda tin dɛn we gɛt fɔ du wit am kin yuz klia fold katɔn fɔ rital prɛzɛntɛnshɔn we pɔsin kin si.
Kastom grafik, fɔyl ifɛkt, print insɛt ɛn transparent panɛl dɛn kin kam togɛda fɔ gift bɔks, ivent pak ɛn prɔmoshɔnal prɔdak.
Fig, tɔys, mɔdel ɛn prɔdak dɛn we pɔsin kin gɛda kin kɔntinyu fɔ si insay klia plastic katon dɛn we di say dɛn we dɛn print de kɔmyuniket di prɔdak ɛn brand infɔmeshɔn.
Pen, kraft prodak, steshɔnari sɛt ɛn smɔl kɔshɔma prodak kin yuz klia PET katon usay prodak visibiliti ɛn shelf prɛzɛnteshɔn na prayorities.
PET kin yuz insay sɔm sɛlɛkɛt it-pak aplikeshɔn dɛn we di ɛksaktɔ PET gred, ink, adeziv ɛn ɔda pak kɔmpɔnɛnt dɛn mit di it-kɔntakt rigyuleshɔn dɛn we dɛn nid fɔ di dɛstineshɔn makit. Di wan dɛn we de bay fɔ aks fɔ di dɔkyumɛnt dɛn we dɛn de yuz pas fɔ tek am se ɛvri PET gred de fala di tin dɛn we pɔsin kin gɛt wit it.
| Selekshɔn Faktɔ | APET / PET | PETG |
|---|---|---|
| Tipik Pozishɔn | Klia rigid pak, katon, tre ɛn thermoformed pak | Klia fabricated prodakt ɛn folding strɔkchɔ dɛn we nid difrɛn fɔm bihayvya |
| Kol we dɛn kin fol | Kris dizayn, gej ɛn prɔsesin kɔndishɔn dɛn impɔtant mɔ | May provayd wan difrɛn fabrication winda fɔ dimand dizayn dɛn |
| Di we aw dɛn de pik di pɔsin | Test di ekzak matirial yuz di fainal dieline, printin, kris rul, adhesive en pakej envairoment | |
We dɛn pak klia wan, dat kin mek pɔsin si di tin dɛn we nɔ fayn. Dipen pan di spesifikeshɔn we dɛn gri pan, inkam ɛn prodakshɔn QC kin inklud:
Material gred ɛn prodakshɔn batch aydentifikeshɔn
Tik ɛn tik tolɛreshɔn
Shit wit, lɔng ɔ rol wit
Transparency ɛn haze usay dɛn spɛsifa
Kɔlɔ ɛn tint kɔnsistɛns
Blak spat, kristal poɛnt ɛn inklushɔn dɛn we pɔsin kin si
Surface skrat ɛn kɔntaminɛshɔn
Flatness ɛn sheet difɔmeshɔn
Print-sayd aydentifikeshɔn usay dɛn nid am
Surface treatment ɔ dyne level usay dɛn spɛsifa am
Ink adhesion afta i dɔn wɛl
Die-cutting ɛn ed kwaliti
Kris kwaliti ɛn folding fɔs
Fold waytin ɛn krak krak
Glu-jɔyn pefɔmɛns
Finished-bɔks skwea ɛn ribaund
Protektiv film ɛn ɛkspɔt pak kɔndishɔn
PET sheet kin luk akseptabl we i flat bɔt i kin sho prɔblɛm afta dɛn dɔn print, kris ɔ glu. So, di aprɔval fɔ prodyuz fɔ gɛt bɔks we dɛn dɔn kɔmplit ɛnitɛm we i pɔsibul.
Nɔto jɔs afta dɛn dɔn print di ink adheshon bɔt dɛn fɔ chɛk bak afta dɛn dɔn kɔt ɛn fold di day, mɔ nia di kris layn dɛn usay di say we dɛn print kin gɛt mɛkanikal strɛs.
Fɔ ripit ɔda, kip wan aprɔv raw matirial sampul ɛn finish pak sampul so dat dɛn go kɔmpia klia, kɔlɔ, printin ɛn fɔlding bitwin batch dɛn.
| Prɔblɛm | Chɛk |
|---|---|
| Ink we dɛn de pul | Verifay printin tritmɛnt, sɔfayz kɔntaminɛshɔn, ink kɔmpitibliti ɛn kɔrɛkt kɔndishɔn |
| Fold Waitning | Rivyu sheet gej, kris dip, fold rayus, tul ɛn fold kɔndishɔn |
| Krak krak na Kris | Chek PET gred, gej, kris jɔyometri ɛn fold dairekshɔn |
| Boks Springs we de opin | Rivyu kris pripiamɛnt, panɛl jɔyometri, matirial stiffnɛs ɛn glu-jɔyn dizayn |
| Glu we nɔ de wok fayn | Test adhesive chemistry, surface treatment, glue area, di tɛm fɔ mɛn ɛn di kɔndishɔn dɛn we de na di envayrɔmɛnt |
| Skrat Klia Surface we dɛn dɔn skrach | Rivyu protɛktiv film, slip, stak, mashin kɔntakt ɛn pak we |
Klia PET na risaykul usay di rayt kɔlɛkshɔn, sɔt ɛn prɔsesin infrastukchɔ de. Di akseptɛns fɔ risaykul kin difrɛn bay di makit ɛn pak kɔnstrɔkshɔn.
Ink kɔvarej, kɔtin, lɛbl, mɛtal dɛkɔreshɔn, adeziv ɛn pepabɔd insɛt kin afɛkt aw dɛn de handle di paket we dɔn dɔn na risaykul strim. So sastaynabiliti klem fɔ tink bɔt di kɔmplit pakej pas di PET bays matirial nɔmɔ.
Tɛm dɛn lɛk we nɔ de ambɔg di envayrɔmɛnt, we dɛn kin risaykul ɔl ɔ we de sev kabon, dɛn fɔ jɔs yuz am we di kɔmplit paket dizayn ɛn di ples-maket infrastukchɔ sɔpɔt di klem.
Bɔks dimɛnshɔn ɛn lod de inflɔws di PET stiffnɛs ɛn tik we dɛn nid. Big katon ɔ tin dɛn we ebi kin nid difrɛn gej ɔ strɔkchɔral dizayn pas smɔl kɔsmɛtik bɔks dɛn.
Nɔ pik tik jɔs bay di prayz. Evaluate rigidity, kris bihayvya, bɔks asɛmbli ɛn prodak sɔpɔt yuz di aktual dieline.
If di paket nid prɛmiɔm transparency, difayn akseptabl haz, tint ɛn visible-defect standad ɔ apruv wan fizik sampul.
Tɛl Wallis if di PET go UV ɔfset, skrin, fleksografik, dijital ɔ ɔda we fɔ print so dat dɛn go ebul fɔ rivyu di sɔfa tritmɛnt we dɛn nid.
Transparent pakej artwok fɔ no us panɛl dɛn stil klia ɛn usay dɛn nid fɔ gɛt wayt ɔndaprint ɔ opaque kɔlɔ dɛn.
Fɔlding-bɔks pefɔmɛns gɛt strɔng inflɔwɛns bay di aktual kɔt ɛn kris dizayn. Di wan dɛn we de bay fɔ tɛst di prodakshɔn daylayn we dɛn want pas fɔ abop pan wan flat matirial sampul nɔmɔ.
Stet if di bɔks go yuz sɔlvɛnt adhesive, UV adhesive, hot melt, ɔda bonding sistem ɔ mɛkanikal lɔk tab so dat dɛn go ebul fɔ evaluate kɔmpatibiliti.
Print, day kɔt, kris, fold ɛn glu ripɔtmɛnt matirial bifo mas prodakshɔn. Chek transparency, print adhesion, waytin, krak, bɔks skwea ɛn glu trɛnk.
Shanghai Wallis Technology Co., Ltd. de saplae PET , PETG , PVC , polycarbonate, akrilik ɛn kad-rilayt plastic matirial fɔ pak, print, displei ɛn industrial aplikeshɔn.
Fɔ folding-bɔks projɛkt, pipul dɛn we de bay kin tɔk bɔt PET tik, shit ɔ rol dimɛnshɔn, kɔlɔ, transparency, surface tritmɛnt, printin rikwaymɛnt, protɛktiv film ɛn ɛkspɔt pak akɔdin to di kɔnvɔyt prɔses we dɛn bin want.
Klia PET say dɛn fɔ protɛkt frɔm skrach, dɔst, prɛshɔn mak ɛn kɔntaminɛshɔn we dɛn de transpɔt ɛn stɔrɔj. Dɛn fɔ pik di rol ɛn shit pak akɔdin to di tik we di matirial tik, di dimɛnshɔn ɛn di sɔfa sɛnsitiviti.
Fɔ apia-kritikal klia pak matirial, bayer dɛn kin spɛsifa protɛktiv film, intalivin, palet protɛkshɔn, rol-ɛnd protɛkshɔn ɛn paket lɛbl bifo shipmɛnt.
Wallis de saplae PET matirial to pak kɔnvɔta, printa, tɛmɔfɔm faktri, fɔl-bɔks manifakta, distribyushɔn ɛn ɔda industrial kɔstɔma dɛn.
Yu kin rivyu di tik we di matirial tik, di sheet dimɛnshɔn ɛn di rol wit akɔdin to di ikwipmɛnt fɔ print, di bɔks saiz ɛn di we aw dɛn de kɔt.
Print-sayd tritmɛnt kin tɔk bɔt akɔdin to ink sistɛm ɛn printin we so di wan dɛn we de bay kin tɛst adheshon bifo kɔmɛshɔnal prodakshɔn.
Riprɛzɛntiv PET sɛmpul dɛn de alaw bayer dɛn fɔ tɛst printin, day kɔt, kris, fold ɛn glu pan dɛn aktual prodakshɔn ikwipmɛnt.
Rol ɛn shit fɔmat de mek dɛn ebul fɔ mach di tin dɛn to difrɛn printin mashin dɛn ɛn layn dɛn we de chenj di pak.
Na transparent rigid ɔ sɛmi-rigid PET matirial we dɛn kin print, day kɔt, kris, fold ɛn gɛda insay klia plastic pak katon.
Di standad tiknes rεnj na aprכksimatli 0.15–3.0 mm, wit kכstכmayz gej dεm we de sכbjεkt to prodakshכn fεsibiliti. Di ideal folding-box tiknes dipen pan katon saiz, prodak wet, rigiditi ɛn kris rikwaymɛnt.
di standad tiknes rεnj fכ dis fold-bכks PET shit na 0.15–3.0 mm. Rikwaymɛnt dɛn we pas 3.0 mm fɔ kɔnfyus sɛpret bikɔs di avaylabl dipen pan di ɛksaktɔl PET gred, kɔnvɔyt prɔses ɛn prodakshɔn kapabiliti.
Suitabl printin-grɛd PET kin evalyu fɔ UV ɔfset printin. di ekzak ink, di tritmεnt we de fכ di sכfayz εn di kכndishכn dεm fכ kכl bifo dεn prodyuz.
Yes, kompitibul PET gred dem kin bi skrin print. Skrin printin na yusful mɔ fɔ opaque wayt, spat kɔlɔ ɛn sɔm dɛkɔretiv ifɛkt dɛn.
di tritmεnt rikwaymεnt dεm dipכnt pan di PET sεf, printin prכsεs εn ink sistεm. Corona, prayma ɔ ɔda printin tritmɛnt kin nid fɔ de, so dɛn fɔ tɔk bɔt di we aw dɛn want fɔ print bifo yu ɔda.
Wait ink de gi wan opaque bakgrɔn biɛn sɔm grafik dɛn we dɛn dɔn pik, we de mek di kɔlɔ kɔntrast bɛtɛ ɛn i de alaw ɔda eria dɛn na di katon fɔ kɔntinyu fɔ bi transparent.
Dɛn kin yuz di rayt PET gred fɔ fold bɔks, bɔt krak krak dipen pan tik, kris jɔyometri, fold rayus, matirial gred ɛn prodakshɔn kɔndishɔn. Di fainal dieline fɔ test bifo mas prodakshɔn.
Fold wayt kin kɔmɔt frɔm kɔnsɛntret mɛkanikal strɛs. Kris dip, rul jɔyometri, shit tiknes, folding rayus ɛn tɛmpracha fɔ rivyu we di waytin pasmak.
Yɛs, dɛn kin yuz adeziv dɛn we go gri wit am. Bond strכng dipכnt pan PET sεf, adhesive kεmistri, glu εria, printin כ kכt na di bonding zon εn kכndishכn dεm we de kכri.
כto-lכk-bכtכm strכkchכ dεm kin divεlכp yuz suitable PET tiknes εn dieline disayn. Prodakt wet, kris bihayvya ɛn asɛmbli prɔses fɔ evaluate yuz wan fizik protɔtayp.
Yɛs. Klia PET folding katon dɛn kin fayn fɔ kɔsmɛtik, skinkeya aksesɔri ɛn pɔsin-keya rital pak usay dɛn want transparent prodak prɛzɛnt.
PET kin yuz fɔ it aplikeshɔn we di matirial we dɛn dɔn pik, ink, adeziv ɛn kɔmplit pak kɔnstrɔkshɔn mit di aplikebul it-kɔntakt rikwaymɛnt fɔ di dɛstineshɔn makit. Dɛn fɔ kɔnfɔm di dɔkyumɛnt dɛn we dɛn nid bifo yu ɔda.
PET insεf nכ de abzכp wata lεk pepa bכd, bכt wan fold katכn nכmal fכ gεt sim εn opin. So dɛn nɔ fɔ tɔk bɔt di kɔmplit paket ɔtomɛtik wan se i nɔ de mek wata pas.
Klia PET kin bi risaykul usay fayn kɔlɛkshɔn ɛn risaykul sistɛm dɛn de. Print ink, adeziv, lɛbl, kɔtin ɛn ɔda paket kɔmpɔnɛnt dɛn kin inflɔws ɛnd-ɔf-layf akseptɛns.
APET na wan we dɛn kin yuz bɔku bɔku wan fɔ klia rigid pak ɛn fɔl katɔn, we PETG gɛt difrɛn fɔm ɛn bɛnd kwaliti dɛn we kin yusful fɔ sɔm dimand fabricated strɔkchɔ dɛn. Di bɛst chus dipen pan tik, dieline, prɔsesin ɛn kɔst rikwaymɛnt.
Yɛs. Di prodak de insay rol ɔ kɔt-shit fɔmat akɔdin to tik, waid, printin ikwipmɛnt ɛn kɔnvɔyt rikwaymɛnt.
Yɛs. Standart listed shit fɔmat dɛn inklud 700 × 1000 mm, 1000 × 2000 mm ɛn 1220 × 2440 mm, wit kɔstɔmayz dimɛnshɔn dɛn we de ɔnda di prodakshɔn rikwaymɛnt dɛn.
Dekorativ finishin lεk fכyl ifekt dεm kin evaluate wit wan kompitibl prכsεs. Fɔyl, adeziv, tɛmpracha ɛn PET sɔfa fɔ tɛst bifo kɔmɛshɔnal prodakshɔn.
Yɛs. Di sampul fɔ fayn fɔ print, day kɔt, kris, fold ɛn glu yuz di aktual prodakshɔn prɔses so dat dɛn go gri fɔ di katon we dɛn dɔn dɔn.
Gi PET tiknes, shit ɔ rol dimɛnshɔn, finish bɔks saiz, dieline if i de, printin we, transparent ɛn opaque artwok rikwaymɛnt, adeziv ɔ lɔk strɔkchɔ, kwantiti, it-kɔntakt rikwaymɛnt if i apɔynt ɛn delivri dɛstineshɔn.
Yu de luk fɔ wan PET sheet manifakta we yu kin abop pan fɔ print folding bɔks ? Send Wallis yu rikwayd tiknes, shit ɔ rol dimɛnshɔn, printin prɔses, bɔks daylayn, transparency rikwaymɛnt, adhesive sistem ɛn kwantiti fɔ matirial rivyu, sampul tɛst ɛn faktri-dayrɛkt B2B prayz.
