Views: 4 Author: Site Editor Ɣeyiɣi si Wotae: 2024-02-02 Dzɔtsoƒe: Teƒe
PVC, PET/PETG kple polycarbonate (PC) gbalẽviwo geɖe abe ɖaseɖigbalẽ ŋutɔŋutɔ ƒe mɔnuwo ene na dɔwɔlawo ƒe akɔtagbalẽviwo, smart ID gbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo, sukuxɔ me gbalẽviwo, amedzrowo ƒe agbalẽviwo kple elektrɔnik mɔɖeɖewo dzi kpɔkpɔ ƒe ɖoɖowo. Wozãa
Gake aŋenu si wotsɔ wɔe ɖeɖeko mefia alesi gbegbe mɔɖeɖe ƒe agbalẽvi le dedie o. Dedienɔnɔ ƒe ɖoɖo mamlɛtɔ nɔ te ɖe ɖaseɖigbalẽ ƒe ɖoɖo bliboa dzi, si me kaɖi-ŋutilã ƒe nu, RFID alo smart-card chip, antenna, ɖaseɖigbalẽ ƒe mɔ̃ɖaŋununya, nya ɣaɣlawo tsɔtsɔ ɣla, safuiwo dzikpɔkpɔ, ame ŋutɔ ƒe tɔtrɔ, nusiwo tsi tre ɖe aʋatsokaka ŋu, nuxlẽla ƒe sɔsɔ kple mɔɖeɖe-dzikpɔkpɔ ƒe ɖoɖowɔwɔ hã le.
Nuwo tiatia gakpɔtɔ le vevie elabena PVC, PET/PETG kple PC naa agbalẽtata ƒe seƒe vovovowo, dzoxɔxɔ ƒe tsitretsitsi, mɔ̃ ƒe anyinɔnɔ, lamination ƒe dɔwɔwɔ kple ɖekawɔwɔ kple ame ŋutɔ ƒe tɔtrɔ mɔ̃ɖaŋununya deŋgɔwo abe laser nuŋɔŋlɔ ene.
Wallis ƒe nuzazãwo PVC, PETG kple polycarbonate card materials , overlays, core sheets, RFID prelam inlays kple nuwuwu-kaɖi egbɔkpɔnuwo na B2B kaɖi wɔlawo kple smart-kaɖi dɔwo.
Access-control card nye ɖaseɖigbalẽ ŋutɔŋutɔ si wozãna tsɔ dea dzesi ezãla eye wotsɔa ɖaseɖigbalẽ ŋuti nyatakakawo naa nuxlẽla alo access-control system si sɔ.
Le ɖoɖoa nu la, magnetic stripe, barcode, QR code, mɔ̃ɖaŋununya si te ɖe ame ŋu si mebɔ o, smart-card mɔ̃ɖaŋununya si me kadodo mele o si ƒe ɣeyiɣi deŋgɔ, dɔwɔwɔ si sɔ kple NFC, contact chip alo mɔ̃ɖaŋununya geɖe ate ŋu anɔ kaɖi me le kaɖi ƒe ŋutilã ɖeka me.
PVC, PET/PETG alo PC ŋutilã la naa nuƒolanɔƒe ŋutɔŋutɔ si ƒo xlã mɔ̃ɖaŋununya siawo. Ele be substrate la nakpɔ antenna kple chip ta esime wòkpɔtɔ le ɖekawɔwɔ me kple agbalẽtata, lamination, punching, personalization kple subɔsubɔdɔ ƒe nɔnɔme si wokpɔ mɔ na.
Vodada si bɔ enye be woasusui be ne ètia aŋe si sesẽ wu la, ewɔa elektrɔnikmɔ̃wo dzi yiyi ƒe ɖaseɖigbalẽ si le dedie wu le eɖokui si.
Kpekpeɖeŋunanuwo koŋ kpɔa ŋusẽ ɖe ŋutilã ƒe anyinɔnɔ, tsitretsitsi ɖe asitɔtrɔ, agbalẽtata kple ame ŋutɔ ƒe tɔtrɔ ƒe mɔnukpɔkpɔwo ŋu. Elektrɔnikmɔ̃wo dzi yiyi ƒe dedienɔnɔ koŋue nɔa te ɖe ɖaseɖigbalẽwo ƒe mɔ̃ɖaŋununya, ɖaseɖiɖimɔnu, nya ɣaɣlawo tsɔtsɔ ɣla, nya ɣaɣlawo ƒe safuiwo dzikpɔkpɔ, nuxlẽla ƒe xɔtuɖaŋu kple mɔɖeɖewo dzi kpɔkpɔ ƒe ɖoɖowo dzi.
Dedienɔnɔ ŋutɔŋutɔ ate ŋu anye laser ƒe nuŋɔŋlɔ, holographic overlays, UV graphics, microtext, tactile features, fesre siwo me kɔ, nyatakaka siwo trɔna, fotowo kple multilayer card constructions siwo wowɔ be woana tɔtrɔ alo ɖɔliɖɔli nasesẽ wu.
Elektrɔnik dedienɔnɔ do ƒome kple alesi kaɖia ɖoa dze kple nuxlẽla la heɖoa kpe edzii. Ele be egbegbe dɔwo nada chip mɔ̃ɖaŋununya, ɖaseɖigbalẽ ƒe ɖoɖowɔɖi, nya ɣaɣlawo ƒe ŋutetewo, safuiwo, nuxlẽla ƒe sɔsɔ kple mɔɖeɖe dzi kpɔkpɔ ƒe xɔtuɖoɖo bliboa kpɔ.
PVC mɔɖeɖegbalẽviwo naa gazazã, agbalẽtata, lamination ƒe dɔwɔwɔ kple ewɔwɔ le agbɔsɔsɔ gã me ƒe dadasɔ ŋutɔŋutɔ. Wozãa wo geɖe na dɔwɔlawo ƒe agbalẽviwo, hamevinyenye ƒe agbalẽviwo, amedzrodzeƒe ƒe safuiwo, sukuxɔ me gbalẽviwo, amedzrowo ƒe ɖaseɖigbalẽwo kple RFID ƒe mɔɖeɖegbalẽvi siwo wozãna ɖaa.
PVC naa anyigba si le gbadzaa na offset, digital, thermal-transfer kple card-tata ƒe ɖoɖo bubu siwo sɔ. Woate ŋu atsɔ nutsyɔnu siwo me kɔ hã awɔ laminatede eye woatsɔ magnet-kawo, asidede agbalẽ te, holographic films, barcodes kple RFID inlays akpe ɖe eŋu.
Nusiwo wotsɔ ƒo ƒui sia na PVC dzea ame ŋu vevietɔ na asitsatsa ƒe ɖoɖo gã siwo me gazazã dzi kpɔkpɔ kple kaɖiwo wɔwɔ tẽ le vevie le.
PVC si wozãna ɖaa ƒe dzoxɔxɔ ƒe tsitretsitsi bɔbɔ wu xɔtunu siwo wotsɔ ƒo ƒu kple polycarbonate siwo wɔa dɔ nyuie wu. Eyata dzoxɔxɔ gã gbugbɔgata tata alo heavy lamination dɔwɔwɔwo bia be woatia kaɖiwo nyuie be woaɖe ʋuʋudedi alo woƒe tɔtrɔ dzi akpɔtɔ.
Zi geɖe la, PVC sɔ nyuie wu na dɔ siwo me subɔsubɔ ƒe agbenɔƒe si sɔ, ame ŋutɔ ƒe nɔnɔme si sɔ kple hoʋiʋli ƒe gazazã nye nudidi vevitɔwo.
Wotiaa kaɖi siwo wotu ɖe polyester dzi abe PET kple PETG ene ne nuƒlelawo hiã na sesẽme, dzoxɔxɔ ƒe tsitretsitsi, atikewo ƒe tsitretsitsi kple lamination ƒe nuwɔna ƒe dadasɔ si to vovo tso PVC bɔbɔe gbɔ.
Mele be woabu PET kple PETG le wo ɖokui si be wonye nɔnɔme siwo sɔ o. Ele be kaɖiwɔlawo naɖe polyester ƒe hatsotso si tututu le eme la gɔme elabena agbalẽtata, lamination ƒe dzoxɔxɔ, nusiwo wotsɔ blaa nu dzi ƒe ɖekawɔwɔ kple kaɖi si wowu enu ƒe wɔwɔme ate ŋu ato vovo.
PET/PETG kaɖi ƒe xɔtuɖoɖowo ate ŋu ana sesẽme nyui, tsi ƒe tsitretsitsi, anyigba ƒe liƒo kple ɖekawɔwɔ kple dzoxɔxɔ si kɔkɔ wu kaɖi-wɔwɔ ƒe ɖoɖowo ne wotia dzesi nyuitɔ.
Kpekpeɖeŋugbalẽvi ƒe xɔtutu siwo wotsɔ ƒo ƒui ƒoa polymer vovovowo nu ƒu be woada asɔ le agbalẽtata ƒe dɔwɔwɔ kple didime ƒe liƒo me. PVC/PET ƒokpli kaɖiwo ɖea vi ŋutɔ ne kaɖitamɔ̃ alo laminator tsɔ dzoxɔxɔ geɖe vɛ wu PVC ƒe asiléƒe siwo wozãna ɖaa bɔbɔe.
Wotiaa polycarbonate gbalẽviwo le afisiafi na dzesidegbalẽvi siwo nɔa anyi didi kple ɖaseɖigbalẽ ƒe ɖoɖo siwo le dedie wu elabena PC ƒoa sesẽme gã, dzoxɔxɔ ƒe tsitretsitsi kple ƒuƒoƒo geɖe ƒe lamination ŋutete sesẽ nu ƒu.
Le kaɖi si me wozãa polycarbonate katã le me la, woate ŋu aƒo PC ƒe ƒuƒoƒo geɖe nu ƒu le dzoxɔxɔ kple nyaƒoɖeamenu me wòazu kaɖi ƒe ŋutilã si wotsɔ wɔ ɖekae evɔ womaɖo ŋu ɖe aŋenu si wozãna ɖaa ŋu le PC ƒe agbalẽvi ɖesiaɖe dome o.
Laser-reactive PC layers ateŋu ado alɔ ame ŋutɔ ƒe tɔtrɔ tegbee abe fotowo, ŋkɔwo, nuŋlɔɖi ƒe xexlẽdzesiwo kple nyatakaka bubu siwo trɔna le kaɖi ƒe wɔwɔme me tsɔ wu be woaɖo ŋu ɖe anyigbatata ɖeɖeko ŋu.
Esia na be laserable PC xɔ asi ŋutɔ na dziɖuɖu ƒe IDwo, ʋukugbalẽviwo, dɔwɔlawo ƒe ɖaseɖigbalẽ siwo le dedie kple agbalẽvi bubu siwo me tsitretsitsi ɖe tɔtrɔ ŋu le vevie le.
Polycarbonate kaɖi ƒe wɔwɔmewo ate ŋu aƒo dedienɔnɔ ƒe megbenya siwo wota, laserable layers, nusiwo me kɔ, chips siwo wotsɔ de eme, optical dedienɔnɔ ƒe akpawo kple ame ŋutɔ ƒe nyatakakawo nu ƒu ɖekae le kaɖia ƒe gogloƒe vovovowo.
Mɔ̃ɖaŋu kple dzoxɔxɔ ƒe dɔwɔwɔ si polycarbonate wɔna na wòsɔ na ɖaseɖigbalẽ siwo wokpɔ mɔ be woanɔ dɔwɔwɔ me ɣeyiɣi didi ŋutɔ wu PVC akɔtagbalẽvi siwo nɔa agbe kpuie siwo wozãna ɖaa.
| Tiatia ƒe Nu | PVC | PET / PETG / | Polycarbonate si wowɔ ɖekae |
|---|---|---|---|
| Gazazã ƒe Nɔnɔme | Zi geɖe la, wotiae be woatsɔ awɔ volume card si me ga mele o | Titina alo dɔwɔwɔ koŋ | Zi geɖe la, wotiae le afisiwo nusiwo nɔa anyi didina kple dedienɔnɔ ƒe nɔnɔmewo tae nuwo ƒe asi lolo wu le |
| Nusiwo nɔa anyi didina | Enyo na asitsatsa ƒe kaɖi zazã le mɔ si sɔ nu | Sesẽme nyui kple dzoxɔxɔ ƒe tiatia siwo nyo wu le xɔtutu nu | Enyo ŋutɔ na ɖaseɖigbalẽwo tutu si anɔ anyi didi |
| Dzoxɔxɔ ƒe Tsitretsitsi | Ebɔbɔ wu nusiwo wotsɔ ƒo ƒu alo PC ƒe wɔwɔme siwo wɔa dɔ nyuie | Viɖe le eŋu na dzoxɔxɔ si lolo wu tata kple lamination ne wogblɔe nyuie | Dzoxɔxɔ gã kple didime ƒe liƒo na kaɖi wɔwɔ si bia nu geɖe |
| Agbalẽtata Tsã | Ebɔ ŋutɔ | Dzeside kple agbalẽtamɔ̃ dzi nɔ te ɖo | Wotsɔa agbalẽtata ƒe mɔ̃ siwo sɔ kpena ɖe eŋu |
| Gbugbɔ Trɔ Asi Le Agbalẽtata Ŋu | Ele be woada dzoxɔxɔ si le ame ŋu la kpɔ | Xɔtuɖoɖo siwo wowɔ ɖekae siwo wotia zi geɖe | Esɔ nyuie na ɖoɖo siwo sɔ |
| Laser ƒe Nɔnɔmetata | Menye viɖe si wozãna ɖaa le PVC si wozãna ɖaa ŋu o | Enɔ te ɖe nusiwo ŋu wotrɔ asi le etɔxɛe dzi | Ŋusẽ gãtɔ si le laser-reactive PC ID xɔtutuwo ŋu |
| RFID / Nunya ƒe Chip | Ate ŋu awɔ RFID kple smart-card inlays ɖekae | Ate ŋu awɔ RFID kple smart-card inlays ɖekae | Ate ŋu awɔ RFID kple smart-card chips ɖekae |
| Dɔwɔna Siwo Wowɔna Zi geɖe | Dɔwɔla, amedzrodzeƒe, hamevinyenye, amedzrowo kple mɔɖeɖegbalẽvi siwo wozãna ɖaa | Akɔtagbalẽvi siwo nɔa anyi didina, mɔɖeɖegbalẽvi siwo wowɔ ɖekae kple kaɖi ƒe ɖoɖo tɔxɛwo | Dziɖuɖu ƒe ID, ʋukugbalẽvi, smart ID si nɔa anyi didi kple ɖaseɖigbalẽ siwo le dedie ŋutɔ |
Mɔɖeɖe dzi kpɔkpɔ kple ID-gbalẽvi geɖe zãa ISO/IEC 7810 ID-1 ƒe nɔnɔme nyanyɛ si ƒe lolome anɔ abe 85.60 × 53.98 mm , si woɖɔna zi geɖe le asitsatsa me be enye CR80 ƒe lolome.
Kaɖi si wowu enu ƒe titrime si bɔ anɔ abe milimeta 0.76 ene, gake smart-kaɖi ƒe xɔtutuwo ate ŋu abia be woatsɔ ƒuƒoƒo vovovowo awɔ ƒuƒoƒo kple mɔɖeɖe ɖe nu ŋu le chip, antenna, overlay kple personalization system nu.
Nu vevi ƒe agbalẽa naa kaɖi ƒe ŋutilã vevitɔ ɣi alo amadede eye ate ŋu atsɔ offset, screen, digital alo nɔnɔmetata bubu siwo wota siwo sɔ.
Le smart card siwo me kadodo mele o me la, prelam inlay me antenna kple chip ƒe ƒuƒoƒo si woda ɖe plastic-gbadzɛwo dome hafi wotsɔa laminate kple punch ƒo kaɖi mamlɛtɔa.
Film siwo me kɔ siwo wotsɔ tsyɔa nu nu dzi kpɔa nɔnɔmetata siwo wota ta eye woate ŋu atsɔ magnet-ka, holographic dedienɔnɔ ƒe nɔnɔmewo, laser-dɔwɔwɔwo alo kaɖi ƒe akpa tɔxɛ bubuwo hã awɔ ɖekae.
Wallis ƒe nuzazãwo RFID prelam inlays na smart-card wɔwɔ le frequency ƒome geɖe me. Ele be frequency si sɔ la nasɔ kple nuxlẽla ƒe xɔtuɖoɖo kple ɖaseɖigbalẽ ƒe dɔwɔwɔ.
Mɔ̃ɖaŋununya si te ɖe ame ŋu si mebɔ o do ƒome geɖe kple domenyinu siwo wozãna tsɔ kpɔa mɔɖeɖe ɖe ame ŋu kple vavalawo ƒe dɔwɔɖoɖowo. Ne wole LF ƒe ɖaseɖigbalẽwo ɖɔlim alo le wo wɔm la, ele be woaɖo kpe chip mɔ̃ɖaŋununya si tututu kple nuxlẽla si li xoxo ƒe ɖekawɔwɔ dzi.
Wozãa smart card siwo me kadodo mele o siwo wozãna zi geɖe zi geɖe hena mɔɖeɖe dzi kpɔkpɔ, amenyenye, sukuxɔ, ʋuɖoɖo kple dɔbiagbalẽvi geɖe zazã ƒe ɖaseɖigbalẽwo.
Nyagbe '13.56 MHz card' ɖeɖe mesɔ gbɔ na dzɔtsoƒe o. Ele be nuƒlelawo nagblɔ chip ƒome si hiã, ŋkuɖodzinu, dedienɔnɔ ƒe ŋutete, UID alo dɔwɔwɔ ƒe nudidiwo kple ɖekawɔwɔ kple nuxlẽla si woɖo taɖodzinu na.
UHF mɔ̃ɖaŋunuwo ateŋu ado alɔ nuxexlẽ ƒe didime didiwo eye woateŋu ada wo kpɔ le ʋu ƒe gege ɖe eme, ʋutɔɖoƒe, nunɔamesiwo ƒe dzesidede kple ɖoɖo bubu siwo me wòhiã be woade dzesi didi wu le.
Habɔbɔ aɖewo hiãa ɖaseɖigbalẽvi mɔ̃ɖaŋununya eve le agbalẽvi ŋutɔŋutɔ ɖeka me le ʋuʋu tso nuxlẽla xoxowo gbɔ yi xɔtuɖaŋu yeyewo gbɔ me. Kpekpeɖeŋugbalẽvi siawo hiã na antenna ƒe ɖoɖo nyuie, chip ƒe teƒe si woaɖo kple eƒe titrime mamlɛtɔ dzi kpɔkpɔ.
Woateŋu atrɔ asi le PVC, PET/PETG kple polycarbonate katã ŋu woazu smart-card xɔtuɖoɖo siwo me RFID alo contactless chips siwo sɔ le.
Eyata mele be nuƒlela natia PC le esi dɔ aɖe bia RFID ta ko o, eye mele be wòatsɔe hã be ele be PVC kaɖi nazã ɖaseɖigbalẽ si me dedienɔnɔ mele o. Card-body material kple elektrɔnik ɖaseɖigbalẽwo ƒe mɔ̃ɖaŋununya nye nyametsotso vovovo siwo wowɔna le nɔnɔmewo ŋu siwo wòle be woawɔ dɔ ɖekae mlɔeba.
Laser-reactive polycarbonate ateŋu atsɔ nuŋɔŋlɔ siwo nɔa anyi ɖaa, fotowo, xexlẽdzesiwo kple nyatakaka siwo trɔna ade kaɖia ƒe wɔwɔme me. Esia ɖea vi ŋutɔ ne ehiã be wòawɔ ame ŋutɔ ƒe nɔnɔme si anɔ anyi didi eye wòatsi tre ɖe tɔtrɔ ŋu.
Holographic overlays siwo me kɔ ate ŋu ana kpeɖodzinya siwo woate ŋu akpɔ esime wole nɔnɔmetata siwo wota ta hã ta tso abrasion kple wo ŋudɔwɔwɔ me.
Dedienɔnɔ ƒe nɔnɔmetata siwo woate ŋu akpɔ kple UV ate ŋu atsɔ ŋkuléleɖenuŋu ƒe nɔnɔme aɖe akpe ɖe eŋu si dzena le keklẽ si sɔ si woyɔna be ultraviolet te.
Fli nyuiwo ƒe megbenyawo kple microtext ate ŋu ana be egbugbɔgawɔ le vome nasesẽ wu eye wòana nukpɔkpɔ ƒe kpeɖodzi ƒe ƒuƒoƒo bubu.
Kpekpeɖeŋugbalẽvi ƒe xexlẽdzesi tɔxɛwo, fotowo, dɔwɔlawo ƒe nyatakakawo, barcode kple QR code ate ŋu atsɔ ɖaseɖigbalẽ ŋutɔŋutɔa asɔ kple habɔbɔ aɖe ƒe nana kple amenyenye dzikpɔkpɔ ƒe ɖoɖoa.
Chip si wotsɔ de eme la naa elektrɔnik ɖaseɖigbalẽwo ƒe dɔwɔwɔ. Ele be woatu chip kple protocol tiatia ɖe access-control system ŋutɔŋutɔ dzi tsɔ wu be woatu card substrate ɖeɖeko dzi.
Wozãa mɔɖeɖe ƒe ɖaseɖigbalẽ ŋutɔŋutɔwo kple nuxlẽlawo, ʋɔtrudzikpɔlawo, ʋuƒo siwo trɔna, agbowo, ʋu siwo kɔa ame yia dzi, ʋutɔɖoƒewo alo xɔtuɖoɖo bubu siwo kpɔa amewo ƒe gege ɖe teƒe aɖe dzi.
Smart card siwo sɔ ateŋu akpɔ gome le logical-access alo digital-identity systems hã me ne card mɔ̃ɖaŋununya, middleware kple authentication architecture do alɔ dɔwɔwɔ si hiã.
Dɔwɔƒewo kple sukuxɔ me dɔwo ate ŋu aƒo dɔwɔlawo ƒe dzesidede, ʋɔtru nu yiyi, vava, nuɖuɖudzraƒe, agbalẽtata, agbalẽdzraɖoƒe alo ʋuɖoɖo ƒe dɔwɔnawo nu ƒu ɖe ɖaseɖigbalẽ ɖeka me. Dɔwɔwɔ geɖe ƒe dɔwo bia be woawɔ ɖoɖo ɖe chip-memory, security-domain kple reader-system ŋu nyuie.
Agbalẽtamɔ̃ siwo wotsɔna taa kaɖi tẽe tsɔa nɔnɔmetata si wota la yia kaɖia ƒe anyime tẽ. Wozãa PVC geɖe hena dɔ sia wɔwɔ, esime woate ŋu atsɔ dɔwɔnu siwo sɔ ado alɔ PET/PETG, composite kple polycarbonate kaɖi siwo sɔ hã.
Retransfer printing taa nɔnɔmetata la ɖe film si le domedome dzi gbã eye emegbe wòblaa film ma ɖe kaɖia ŋu. Esi wònye be dɔwɔwɔ sia zãa dzoxɔxɔ bubuwo ta la, dzoxɔxɔ si le kaɖi me ƒe tsitretsitsi kple didime ƒe liƒo va le vevie wu.
Dɔwɔƒewo ƒe kaɖiwo wɔwɔ ƒoa nu vevi siwo wota, nusiwo wotsɔ blaa nu kple nusiwo wotsɔ tsyɔ nu dzi nu ƒu to dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si dzi wokpɔna me. Ele be lamination ƒe nuwɔna si sɔ nanɔ ƒuƒoƒoawo katã si be woaƒo asa na bubbles, delamination, warping alo shrinkage si gbɔ eme.
Dɔwɔlawo ƒe akɔtagbalẽviwo, amedzrowo ƒe agbalẽviwo, amedzrodzeƒegbalẽviwo, hamevinyenye ƒe agbalẽviwo kple asitsatsa ŋuti ɖaseɖigbalẽ siwo wozãna ɖaa ate ŋu azã PVC zi geɖe ne agbalẽtata ƒe sɔsɔ kple gazazã nyuie nye nu vevitɔwo.
Woate ŋu abu PET/PETG alo xɔtutu siwo wotsɔ ƒo ƒui ŋu ne kaɖi-wɔwɔ ƒe ɖoɖo alo zazã ƒe nɔnɔme bia dzoxɔxɔ alo mɔ̃ ƒe dɔwɔwɔ si nyo wu.
Polycarbonate sɔ vevietɔ ne ɖoɖoa bia be kaɖi ƒe agbenɔƒe didi, laser-kpa, dedienɔnɔ ƒe xɔtutu le akpa vovovowo me kple tsitretsitsi sesẽ ɖe ŋutilã me tɔtrɔ ŋu.
Dɔwɔƒewo ƒe ɖaseɖigbalẽwo ateŋu aƒo dɔwɔlawo ƒe fotowo, RFID mɔɖeɖe ƒe mɔ̃ɖaŋununya, vavalawo ƒe dɔwɔwɔ kple dzesidede nukpɔkpɔ nu ƒu ɖekae.
Zi geɖe la, amedzrodzeƒedɔwo tsɔa ganyawo ƒe agbɔsɔsɔ gã, agbalẽtata ƒe nyonyome kple alesi wòawɔ ɖeka kple gaƒoɖokui ƒe ɖoɖo si woda ɖe eme la ɖoa nɔƒe gbãtɔ.
Sukuxɔ me ɖaseɖigbalẽwo ate ŋu awɔ xɔtuɖoɖo kple vava, agbalẽdzraɖoƒe, nuɖuɖu-nana kple dɔbiagbalẽvi bubu siwo ŋu woɖe mɔ ɖo la nu ƒu ɖekae.
Dɔwɔƒewo ƒe teƒewo ate ŋu abia be kaɖia nanɔ anyi eteƒe nadidi wu, atikewo ƒe tsitretsitsi, dzoxɔxɔ ƒe tsitretsitsi alo ametakpɔnu siwo woatsɔ atsyɔ wo dzi le dɔwɔlawo ƒe dɔwɔwɔ ƒe nɔnɔmewo nu.
Dziɖuɖu ƒe dzesidede dɔwo ate ŋu abia PC multilayer xɔtutu, laser personalization, integrated chips, optical dedienɔnɔ ƒe akpawo kple subɔsubɔ agbenɔƒe didi.
Finished-card thickness: ɖo kpe xɔtuɖoɖo bliboa dzi le kaɖia kple nuxlẽla ƒe nɔnɔmewo nu.
Dimensions: ɖo kpe didime, kekeme, dzogoe ƒe didime kple punching ƒe nyateƒetoto dzi.
Flatness: dziɖuɖu warping le lamination kple ame ŋutɔ ƒe tɔtrɔ megbe.
Layer adhesion: lé ŋku ɖe bubbles, peeling kple delamination ŋu.
Agbalẽtata ƒe nyonyome: lé ŋku ɖe ŋkɔ ŋɔŋlɔ, amadede, fotowo, nuŋɔŋlɔ nyuiwo kple anyigba ƒe nɔnɔme madeamedziwo ŋu.
Nutsyɔtsyɔ ƒe nyonyome: lé ŋku ɖe nusiwo me kɔ, ʋuʋudedi, holographic alignment kple magnetic-stripe positioning le afisi wòsɔ le.
Chip ƒe nɔƒe: ɖo kpe chip ƒe teƒe dzi le kaɖi ƒe punching kple ame ŋutɔ ƒe ɖoɖowo nu.
Antenna ƒe yiyi: ɖo kpe elektrikŋusẽ ƒe blibonyenye dzi do ŋgɔ na lamination kple emegbe.
RF ƒe dɔwɔwɔ: dodokpɔ kaɖi ƒe kadodo kple nuxlẽla siwo sɔ.
Encoding: ɖo kpe nyatakaka siwo hiã, safuiwo kple ɖaseɖigbalẽwo ƒe ɖoɖowɔwɔ dzi ne encoding nye nusiwo woatsɔ ana ƒe akpa aɖe.
Laser ame ŋutɔ ƒe tɔtrɔ: ɖo kpe vovototo, nɔƒe kple nyatakakawo ƒe nyonyome dzi na laserable PC xɔtuɖoɖowo.
Mɔ̃ ƒe anyinɔnɔ: ɖe bend, abrasion alo dzedze ƒe nudidi bubu siwo sɔ na ɖoɖowɔɖia me.
De dzesi nuxlẽla, dziɖula, ɖaseɖigbalẽ ƒe ɣeyiɣi si woda ɖe eme, chip mɔ̃ɖaŋununya kple kpeɖodzimɔnu si hiã hafi nàtia kaɖia ƒe wɔwɔme.
Mele be amedzro ƒe ɖaseɖigbalẽ si anɔ anyi ɣeyiɣi kpui aɖe kple dziɖuɖu ƒe ID si anɔ anyi didi nazã nusiwo woatsɔ atiae ƒe dzidzenu ɖeka ma ke o.
Tsɔ nuawo ƒe dɔwɔwɔ sɔ kple gazazã, woƒe anyinɔnɔ, dzoxɔxɔ, agbalẽtata ƒe ɖoɖo kple ame ŋutɔ ƒe tɔtrɔ ƒe nudidiwo.
Tsɔ LF, HF alo UHF gblɔ ne ènya chip alo ɖaseɖigbalẽ ƒe mɔ̃ɖaŋununya si sɔ pɛpɛpɛ kple nuxlẽla vɔ ko.
Ðe nu vevi ƒe titrime, inlay ƒe titrime, agbalẽ siwo wota kple nusiwo wotsɔ tsyɔ nu dzi ale be agbalẽvi si wowu enu bliboe la naɖo titrime kple gbadzaƒe si wobia gbɔ.
Ðo kpe agbalẽtata tẽ-ɖe-kaɖi dzi, agbalẽtata si wogbugbɔ tsɔ yi teƒe bubu, agbalẽtata le dɔwɔƒewo ƒe offset, dzoxɔxɔ ƒe ame ŋutɔ ƒe tɔtrɔ, laser-kpa alo mɔnu bubu aɖe dzi hafi nàda asi ɖe nusi wotsɔ wɔe dzi.
Tso nya me nenye be ɖaseɖigbalẽa hiã hologram, UV ƒe nɔnɔme, microtext, laser nɔnɔmetata, asidede agbalẽ te, magnetic stripe, fesre si me kɔ alo nyateƒetoto ŋutɔŋutɔ ƒe nɔnɔme bubuwo.
Da kpɔɖeŋugbalẽviwo kpɔ to nuxlẽla, encoder, agbalẽtamɔ̃, laminator kple access-control nɔnɔme si woɖo be woazã hafi ada asi ɖe wo wɔwɔ le agbɔsɔsɔ gã me dzi.
Dɔbiagbalẽvi: dɔwɔla ƒe ID, amedzrodzeƒe ƒe safui, sukuxɔ me agbalẽvi, amedzro ƒe agbalẽvi, ID si le dedie alo ɖoɖo bubu aɖe.
Kpekpeɖeŋugbalẽvi ƒe nuzazã: PVC, PET, PETG, PVC/PET ƒe ƒuƒoƒo alo polycarbonate.
Wowu didime nu: ISO ID-1/CR80 alo nɔnɔme si wowɔ ɖe ɖoɖo nu.
Finished thickness: na taɖodzinu ƒe titrime kple mɔɖeɖe ɖe nu ŋu.
Mɔ̃ɖaŋununya si xɔa ɖaseɖigbalẽ: magnetic stripe, LF, HF, NFC-si sɔ, UHF, contact chip alo mɔ̃ɖaŋununya eve.
Chip: gblɔ chip ƒomea tututu alo kaɖi ƒe nufiame si li xoxo.
Nuxlẽla: na nuxlẽla ƒe kpɔɖeŋu kple ɖoɖo ne ele be woaɖo kpe edzi be esɔ.
Agbalẽtata: offset, digital, direct-to-card, retransfer alo card stock si wota do ŋgɔ.
Ame ŋutɔ ƒe nɔnɔme: foto, barcode, QR, xexlẽdzesi, encoding alo laser engraving.
Nutsyɔtsyɔ: dzidzenu si me kɔ, holographic, magnet fli alo laserable nutsyɔnu.
Magnetic stripe: gblɔ LoCo/HiCo alo ɖoɖo bubu si hiã le afisi wòsɔ le.
Dedienɔnɔ ƒe nɔnɔmewo: hologram, UV, microtext, laser ƒe ame ŋutɔ ƒe nɔnɔme alo nudidi bubuwo.
Nutome: ɔfis, gota, dɔwɔƒewo, dzoxɔxɔ gã alo abrasion ƒe nɔnɔme siwo sɔ.
Subɔsubɔ ƒe agbenɔƒe si wokpɔ mɔ na: ɖe ɣeyiɣi si woɖo be woatsɔ aɖɔlii la me.
Agbɔsɔsɔ: kpɔɖeŋu, kpeɖodzi agbɔsɔsɔme kple asitsatsa ƒe nyagblɔɖi.
Supply level: raw core sheet, overlay, RFID prelam inlay, kaɖi ƒuƒlu alo kaɖi si wotsɔ encoded wu enu.
Wallis naa kaɖi ƒe nu veviwo le polymer ƒome geɖe me ale be ewɔlawo nate ŋu atia kaɖi-ŋutilã ƒe wɔwɔmewo le agbalẽtata, lamination, anyinɔnɔ didi kple dedienɔnɔ ƒe nudidiwo nu.
PVC, PETG kple PC overlay tiatia ateŋu akpɔ kaɖi ƒe nuto siwo wota ta eye woado alɔ nɔnɔme bubuwo abe magnetic stripes, holographic effects kple laserable constructions.
Wallis naa LF, HF kple UHF prelam inlay xɔtuɖoɖo siwo wowɔ ɖe ɖoɖo nu kple chip, antenna, ɖoɖo kple agbalẽ ƒe nudidi siwo woɖo ƒo xlã smart-card dɔa.
Woate ŋu ada polycarbonate core sheets kple overlays siwo sɔ la kpɔ na ID card siwo nɔa anyi didi, laser-personalized credentials kple secure-card xɔtutu bubuwo.
Nuƒlelawo ate ŋu adzro agbalẽviwo wɔwɔ ƒe agbalẽwo, nusiwo wotsɔ tsyɔ wo dzi, prelam inlays, kaɖi ƒuƒluwo alo kaɖi siwo wowɔ vɔ si wowɔ ɖe ɖoɖo nu le woƒe wɔwɔme ƒe nɔnɔme nu.
Kpɔɖeŋu kaɖiwo alo kaɖi ƒe nuzazãwo ɖea mɔ na dɔwɔƒewo be woada agbalẽtata, lamination, punching, encoding, RF ƒe dɔwɔwɔ kple nuxlẽla ƒe ɖekawɔwɔ kpɔ hafi ada asi ɖe asitsatsa ƒe agbɔsɔsɔmewo dzi.
Xexeame katã ƒe nyatakaka nyuitɔ aɖeke meli o. PVC dzea ame ŋu na gaxɔgbalẽvi siwo ƒe lolome lolo, PET/PETG kple xɔtunu siwo wotsɔ ƒo ƒui ate ŋu ana woƒe sesẽme alo dzoxɔxɔ ƒe tsitretsitsi nanyo ɖe edzi, eye wolɔ̃a polycarbonate ne agbenɔƒe didi, laser nuŋɔŋlɔ kple nuŋlɔɖi siwo le dedie wu tutu le vevie.
Menye le eɖokui si o. Polycarbonate naa ŋutilã ƒe anyinɔnɔ nyona ɖe edzi eye wòdoa alɔ ame ŋutɔ ƒe tɔtrɔ sesẽ si tsi tre ɖe asitɔtrɔ le ame ŋu abe laser nuŋɔŋlɔ ene, gake elektrɔnik mɔɖeɖe ƒe dedienɔnɔ nɔ te ɖe chip, ɖaseɖigbalẽ ƒe ɖoɖowɔɖi, nya ɣaɣlawo, safuiwo dzikpɔkpɔ kple nuxlẽla ƒe ɖoɖo dzi.
Ɛ̃. Wozãa PVC geɖe ƒo xlã RFID prelam inlays siwo me antenna kple chip le na contactless access-control kple smart-card dɔwɔwɔwo.
Ɛ̃. PET/PETG kaɖi ƒe xɔtutu siwo sɔ ate ŋu ade RFID alo smart-card inlays ne wowɔ nuawo, lamination ƒe dɔwɔwɔ kple antenna ƒe wɔwɔme ɖekae.
Ɛ̃. Polycarbonate ID xɔtutuwo ate ŋu ade smart-card chips kple antenna siwo me kadodo mele o abe ɖaseɖigbalẽ siwo le dedie siwo le ƒuƒoƒo geɖe me ƒe akpa aɖe ene.
RFID prelam inlay nye kaɖi ƒe agbalẽvi si wowɔ afã kple afã si me RFID chip kple antenna le si wotsɔ bla ɖe plastic ƒuƒoƒo dome hafi wotae, lamination mamlɛtɔ kple card punching.
Zi geɖe la, LF access cards wɔa dɔ le 125 kHz lɔƒo, gake HF smart-card systems ya wɔa dɔ le 13.56 MHz zi geɖe. Frequency ɖeɖe meɖea dedienɔnɔ alo dɔwɔwɔ ɖekae me o; ele be woaɖo kpe chip kple nuxlẽla ƒe sɔsɔ pɛpɛpɛ hã dzi.
Ao, mɔ̃ɖaŋununya geɖe siwo me kadodo mele o wɔa dɔ le 13.56 MHz dzi, gake frequency ɖeɖe dzaa meka ɖe NFC ƒe dɔwɔwɔ alo nuxlẽla ƒe dɔwɔwɔ ɖekae dzi o. Ele be woade dzesi chip kple protocol tɔxɛa.
Dual-frequency card ƒoa ɖaseɖigbalẽ ƒe mɔ̃ɖaŋununya eve siwo sɔ nu ƒu ɖe ŋutilã me kaɖi ɖeka me. Ate ŋu aɖe vi le nuxlẽla-ɖoɖo ƒe ʋuʋu me alo ne zãla ɖeka hiã na mɔɖeɖe ɖe xɔtuɖoɖo vovovo eve ŋu.
Xɔtuɖaŋu siwo wowɔ ɖekae ate ŋu ana dzoxɔxɔ kple didime ƒe dɔwɔwɔ nanyo ɖe edzi ne wotsɔe sɔ kple PVC si wozãna ɖaa, si ate ŋu anye nusi ŋu asixɔxɔ le na agbalẽtata gbugbɔgatsɔ yi teƒe bubu alo kaɖi ƒe lamination bubuwo.
Polycarbonate ƒoa ɣeyiɣi didi ƒe anyinɔnɔ kple multilayer fusion kple laser-personalization ŋutetewo nu ƒu. Nɔnɔme siawo na be woate ŋu atsɔ dedienɔnɔ ŋuti nyatakakawo kple nɔnɔmewo ade kaɖia ƒe wɔwɔme me goglo wu.
Ẽ, ne wozã laser-reactive polycarbonate ƒuƒoƒo. Woateŋu awɔ fotowo, nuŋɔŋlɔwo, xexlẽdzesiwo kple nyatakaka bubu siwo wowɔ na ame ŋutɔ le PC kaɖi ƒe ɖoɖoa me.
Mɔɖeɖegbalẽvi geɖe zãa ISO/IEC 7810 ID-1 / CR80 ƒe didime si ade 85.60 × 53.98 mm. Ele be woagblɔ taɖodzinu ƒe titrime kple mɔɖeɖe ɖe nu ŋu hã.
Anɔ abe 0.76 mm alo 30 mil bɔ ŋutɔ na ID-1 gbalẽvi siwo wozãna ɖaa, gake ele be eƒe titrime si tututu wowu enu la nasɔ kple nuxlẽla, agbalẽtamɔ̃, chip kple kaɖi ƒe wɔwɔme bliboa.
Ɛ̃. Mɔ̃ɖaŋununya vovovowo ƒe kaɖiwo ate ŋu aƒo RFID alo smart-card inlay kple magnetic stripe nu ƒu ne ɖoɖo siwo li fifia bia.
Ɛ̃. Woateŋu ade holographic overlays alo optical features bubuwo PVC, PETG alo PC card xɔtutu siwo sɔ me be woana nukpɔkpɔ ƒe kpeɖodzi kple nɔnɔmetata takpɔkpɔ.
Ate ŋu ne ɖaseɖigbalẽa ƒe mɔ̃ɖaŋununya gbogbo siwo hiã eye antenna/chip ƒe ɖoɖo ŋutɔŋutɔ do alɔ wo. Ele be woadoe kpɔ be esɔ kple nuxlẽla ƒe ɖoɖo ŋutɔŋutɔwo.
Ɛ̃. Ele be woado ewɔwɔ ƒe kpɔɖeŋuwo kpɔ hena woƒe didime, agbalẽtata, lamination, RF ƒe dɔwɔwɔ, encoding, nuxlẽla ƒe sɔsɔ, card flatness kple dedienɔnɔ ƒe ame ŋutɔ ƒe tɔtrɔ ɖesiaɖe si dɔa bia.
Na kaɖi ƒe nuzazãwo, eƒe didime, eƒe titrime si wowu enu, chip alo kaɖi ƒe nufiame si li, zi gbɔ zi geɖe, nuxlẽla ŋuti nyatakakawo, agbalẽtata ƒe nutatawo, dedienɔnɔ ƒe nɔnɔmewo, encoding ƒe nudidiwo, agbɔsɔsɔme kple nusiwo woatsɔ ana ƒe ɖoɖo si hiã.
PVC, PET/PETG kple polycarbonate ɖesiaɖe le teƒe vevi aɖe le access-card wɔwɔ me. PVC naa gazazã ƒe wɔwɔme kple agbalẽtata ƒe ɖekawɔwɔ gbadzaa, PET/PETG kple nusiwo wotsɔ ƒo ƒui ate ŋu ana woƒe anyinɔnɔ kple dzoxɔxɔ ƒe dɔwɔwɔ nanyo ɖe edzi, esime polycarbonate naa mɔnukpɔkpɔ sesẽ aɖe na agbe didi kple laser-ame ŋutɔ ƒe ɖaseɖigbalẽ siwo le dedie.
Gɔmeɖose vevitɔ kekeake si dzi woakpɔ afisi woakpɔe tsoe nye be woaƒo asa na nuwɔwɔ ɖe kaɖi-ŋutilãnuwo ŋu be wonye dedienɔnɔ ƒe kuxia gbɔ kpɔnu bliboe. Ele be woatia nusiwo woatsɔ awɔ dɔe, chip, antenna, ɖaseɖigbalẽ ƒe ɖoɖowɔɖi, nuxlẽla, nya ɣaɣla, ame ŋutɔ ƒe tɔtrɔ kple kaɖi tutu abe ɖoɖo ɖeka si wowɔ ɖekae ene.
Ðo wò mɔɖeɖe-dzikpɔkpɔ dɔwɔɖoɖo, nuxlẽla si li xoxo, chip alo frequency, kaɖi ƒe nu, eƒe titrime si wowu enu, nutata, dedienɔnɔ ƒe nɔnɔmewo kple agbɔsɔsɔme ɖa be nàdzro kaɖi ƒe nu siwo sɔ, RFID prelam inlays alo kaɖi ƒe kpɔɖeŋu siwo wowɔ vɔ me.
