|
Polycarbonate core sheets na ID cards, ʋukugbalẽviwo kple mɔzɔgbalẽ ŋuti nyatakakawo ƒe axawo. Trɔ asi le titrime, amadede, opacity, anyigba kple laserable grades, kple B2B kpɔɖeŋuwo na agbalẽtata, lamination kple dodokpɔ.
WLS- PC Core sheet
WALLIS
| Amadede: | |
|---|---|
| Agbɔsɔsɔ: | |
| Agbɔsɔsɔ: | |
Wallis polycarbonate core sheet naa dedienɔnɔ ƒe agbalẽtalawo, kaɖi wɔlawo, inlay wɔlawo, system integrators kple document contractors siwo le multilayer identity credentials wɔm. Wotsɔa Woateŋu aɖo PC dzesi ɣiwo, siwo me kɔ kple esiwo ku ɖe dɔa koŋ ŋu na dukɔa ƒe ID gbalẽviwo, ʋukugbalẽviwo, nɔƒe ƒe mɔɖegbalẽwo, e-passport nyatakaka axawo, mɔɖeɖe ƒe ɖaseɖigbalẽwo kple kaɖi ƒe ɖoɖo bubu siwo nɔa anyi didi.
Titrime siwo li la tso 50μm va ɖo 800μm , kple agbalẽ ƒe nɔnɔme siwo sɔ abe 505×590mm kple 295×485mm ene. Nuƒlelawo ate ŋu agblɔ titrime, opacity, amadede, anyigba ƒe nɔnɔme, agbalẽtata ƒe atikewɔwɔ, laser ŋuɖoɖo, ametakpɔ film kple dɔdɔ ƒe agbawo le nuŋlɔɖi xɔtutu kple ewɔwɔ dɔwɔnu siwo dzi woda asi ɖo nu.
Tiatia ƒe nuŋlɔɖi vevi: ' PC core sheet,' 'printable PC film,' 'laserable PC film' kple 'transparent PC Overlay film ' ɖɔ dɔwɔwɔ ƒe ƒuƒoƒo vovovowo. Laser dzesidede dɔwɔwɔ nye formulation- kple layer-koŋ; ele be woaɖo kpe edzi kple laser ɖoɖo ŋutɔŋutɔ, layer stack kple personalization taɖodzinu hafi bulk ewɔwɔ.
Full- PC document structures: wowɔe na polycarbonate ƒuƒoƒo siwo sɔ siwo ƒoa ƒu le dzoxɔxɔ kple nyaƒoɖeamenu si dzi wokpɔ ŋusẽ ɖo te.
Dɔwɔwɔ tɔxɛ ƒe agbalẽtata: woateŋu ada offset, screen kple UV tata kpɔ kple ink kple curing system si wotia.
Laserable tiatia: li ne ele be layer si woɖo la nawɔ grayscale alo black contrast si dzi wokpɔ ŋusẽ ɖo.
OEM tɔtrɔ: eƒe titrime, agbalẽ ƒe lolome, amadede, anyigba kple nubablɛ siwo wowɔ ɖe ɖoɖo nu na dɔwɔƒewo ƒe wɔwɔ.
Kpɔɖeŋu ƒe kpeɖodzi: agbalẽtata, lamination, laser, lãɖeɖe kple nuwuwu-nuŋlɔɖi dodokpɔwo hafi asitsatsa ƒe mɔɖeɖe.
Bia PC Core sheet Kpɔɖeŋuwo kple Mɔ̃ɖaŋununya ƒe Totoɖeme
Asixɔxɔ siwo le ete la ɖɔ adzɔnuwo ƒe hatsotso si li fifia kple nyatakaka siwo wozãna ɖaa. Ele be woaŋlɔ mɔɖeɖe mamlɛawo, nukpɔkpɔ ƒe nɔnɔmewo, laser ƒe ŋuɖoɖo, lamination parameters kple lɔlɔ̃ ɖe edzi ƒe dzidzenuwo ɖe mɔ̃ɖaŋununya ƒe nɔnɔme si dzi woda asi ɖo alo Sika Kpɔɖeŋu na dɔ ɖesiaɖe.
| Parameter | si Li ƒe Nyatakaka |
|---|---|
| Nu | Polycarbonate ( PC ) film alo agbalẽ na dedienɔnɔ-nuŋlɔɖi xɔtuɖoɖo siwo le ƒuƒoƒo geɖe me |
| Dɔwɔwɔ ƒe Akpa si Wowɔna | Core, printed core alo project-koŋ ƒe ememe xɔtuɖoɖo ƒe ƒuƒoƒo; ɖo kpe edzi nenye be dzeside si nètia la nye esi woate ŋu atsɔ laser |
| Titrime ƒe didime | 50–800μm (0.05-0.80mm) ƒe didime; mamlɛtɔ ƒe anyinɔnɔ nɔ te ɖe dzeside, amadede, anyigba kple nudɔdɔ ƒe agbɔsɔsɔme dzi |
| Agbalẽvi ƒe Agbɔsɔsɔme Siwo Woɖo Ðe Ðoɖo Nu | 505 × 590mm, 295 × 485mm kple didime siwo wowɔ ɖe ɖoɖo nu |
| Amadede kple Amadede si me mekɔ o | Yevu, si me kɔ alo esi wowɔ ɖe ɖoɖo nu; ɖe opacity, ɣie kple amadede ƒe mɔɖeɖe ɖe nu ŋu gɔme ne ehiã |
| Tiatia Siwo Le Anyigba Dzi | Matte, matte nyui, glossy alo dɔ aɖe koŋ ƒe nɔnɔme; agbalẽtata ƒe atikewɔwɔ si li le dzeside nu |
| Agbalẽtata ƒe Dɔwɔnawo | Offset, silk-screen kple UV tata le ink, pretreatment, curing kple lamination dodokpɔwo te |
| Laser ƒe Ame ŋutɔ ƒe Nɔnɔmewɔwɔ | Atike siwo woate ŋu atsɔ laser awɔe siwo li; gblɔ laser ƒe ƒutsotsoe ƒe didime, focal strategy, taɖodzinu ƒe vovototo kple layer ƒe nɔƒe |
| Lamination | Wokpɔ ŋusẽ ɖe dzoxɔxɔ gã PC lamination; dzoxɔxɔ, nyaƒoɖeamenu, nɔƒe kple fafa nɔ te ɖe ƒuƒoƒo bliboa dzi |
| Elektrɔnikmɔ̃wo ƒe Ðekawɔwɔ | Woate ŋu ada asɔ kple contactless inlays, contact modules kple transparent-fesre xɔtuɖoɖowo |
| Nusiwo wobla ɖe agba me | Takpɔnu film, tsi-tsi-tsitretsitsi ƒe babla, kakɛwo, pallets kple customized batch labels |
| MOQ kple Kplɔla Ɣeyiɣi | Woɖo kpe edzi le dzeside, didime, amadede, anyigba, mɔɖeɖe ɖe nu ŋu kple ewɔwɔ ƒe ɖoɖowɔɖi nu |
Xexlẽme siawo ɖea vi na mɔ̃ɖaŋu ŋuti numedzodzro gbãtɔ gake menye xexeame katã ƒe nɔnɔme si ŋu kakaɖedzi le na PC ƒe dzesi ɖesiaɖe o. Ele be woaɖo kpe TDS mamlɛtɔ, ŋkuléleɖenuŋu mɔnu kple mɔɖeɖe ɖe nu ŋu dzi na nusi wotia.
| Nuwo ƒe | Mɔfiame / Mɔnu | Unit | Typical Reference |
|---|---|---|---|
| Toto | — . | g/cm⊃3 ƒe ƒuƒoƒo; | 1.22 ±0.05 ƒe xexlẽme |
| Tensile Ŋusẽ | Mɔ̃ / le tsia dzi | MPa | ≥50 ƒe xexlẽme |
| Tensile Ŋusẽ | Transverse / tsitrenu | MPa | ≥50 ƒe xexlẽme |
| Vicat Fafa ƒe Dzoxɔxɔ | Dodokpɔ ƒe nɔnɔme si woɖo ɖi si dzi woaɖo kpee | °C | 145 ±2 ƒe xexlẽme |
| Anyigbadzi Dyne ƒe Dzidzeme | Wowɔ atike na anyigba si woate ŋu ata | dynes/cm | ≥38 ƒe xexlẽme |
| Titrime ƒe Mɔɖeɖe ɖe Nu Ŋu | Dɔa ƒe dzidzedzekpɔkpɔ ƒe ɖoɖo si ku ɖe dɔa koŋ ŋu | μm alo % . | Ðo kpe edzi to dzeside kple nuƒle ƒe nɔnɔmewo nu |
| Shrinkage / Gbadzaƒe | Le lamination cycle si dzi woda asi ɖo megbe | — . | Ðe egɔme kple kaɖi ƒe ƒuƒoƒo bliboa |
Zi geɖe la, PC ƒuƒoƒo geɖe siwo me dɔ vovovowo le la nɔa polycarbonate nuŋlɔɖi si le dedie me. Nyagbɔgblɔ nyuitɔ zazã le RFQ me xea mɔ na nuƒlelawo be woagaxɔ Overlay film si me kɔ ne wohiã nu vevi si woate ŋu ata si me mekɔ o, alo film si womate ŋu ata laser o ne wohiã laser ƒe ame ŋutɔ ƒe nɔnɔme ememetɔ.
| Layer Ƒomevi | Dɔwɔwɔ Gbãtɔ | Safui RFQ Nyabiasewo |
|---|---|---|
| Yevu / Opaque PC Nu vevi | Enaa opacity, amadede megbe, titrime kple xɔtuɖoɖo ƒe kpekpeɖeŋu; ate ŋu atsɔ nɔnɔmetata siwo wota hã ɖe asi | Wobia titrime, ɣie, opacity, anyigba, agbalẽtata mɔnu kple ne laser ŋuɖoɖo hiã |
| Transparent PC Nu vevi / Fesre Film | Ewɔa teƒe siwo me kɔ, fesrewo alo xɔtuɖoɖo ƒe ƒuƒoƒo ememetɔwo | Optical eme kɔ, haze, texture, titrime, fesre geometry kple lamination ƒe ɖekawɔwɔ |
| Woate ŋu ata PC Film | Xɔa offset, screen alo UV inks hafi lamination | Agbalẽtata ƒe akpa, dyne dzidzenu, ink ɖoɖo, dɔyɔyɔ, adhesion kple amadede taɖodzinu |
| Laserable PC Film | Ewɔa laser ƒe vovototo si dzi wokpɔna na nuŋɔŋlɔ, nɔnɔmetata alo dedienɔnɔ ƒe nɔnɔmetatawo | Laser ɖoɖo, ƒutsotsoe ƒe didime, focal goglome, grayscale, ameyibɔ density, asikaka nudidi kple layer nɔƒe |
| Womewɔa Laser o PC Overlay film | Ekpɔa ƒuƒoƒo siwo wota alo esiwo woate ŋu atsɔ laser la ta evɔ metsɔa laser ƒe nuwɔna si womedi o kpena ɖe eŋu o | Nukpɔkpɔ le gaglãgbe, eƒe anyigba ƒe nɔnɔme, eƒe titrime, nuŋɔŋlɔ ƒe nuwɔna kple agbalẽa ƒe asiɖeɖe le eŋu |
| Wotsyɔ nu / Kadodo PC Overlay film | Ezãa nusi wotsɔ blaa nu be wòana kadodo nanyo ɖe edzi le xɔtuɖaŋu si wotsɔ tsaka alo esi wota koŋ me | Coating ƒe akpa, substrate si sɔ, peel taɖodzinu, dzoxɔxɔ ƒe tsatsam kple nudzraɖoƒe ƒe nɔnɔmewo |
Nuŋlɔɖiwɔlae ɖoa ƒuƒoƒoawo ƒe xexlẽme kple teƒe si tututu wole. Kpɔɖeŋu si gbɔna ɖe nusita wòle be woatia core sheet la be wòanye stack blibo ƒe akpa aɖe tsɔ wu be wòanye adzɔnu si ɖe eɖokui ɖe aga.
| Kpɔɖeŋu Ðoƒe | Ate ŋu adzɔ Nu | Taɖodzinu kple kpeɖodzi |
|---|---|---|
| Gomenuwo ƒe Anyigba | Nusi me kɔ si me laser mele o alo ametakpɔnu PC Overlay film | Anyigba ƒe nɔnɔme, abrasion takpɔkpɔ, ŋkume kɔ nyuie kple ɖekawɔwɔ kple ame ŋutɔ ƒe goglome |
| Laser Ame ŋutɔ ƒe Nɔnɔmewɔwɔ Layer | Laserable PC film si me kɔ alo ɣi | Nɔnɔmetata, nuŋɔŋlɔ, grayscale, CLI/MLI alo dɔa koŋ ƒe laser nɔnɔmetatawo |
| Layer si Wota | PC film ɣi alo esi me kɔ si woate ŋu ata | Guilloche, microtext, UV nɔnɔmetatawo, megbenyawo kple aɖaŋunu siwo trɔna |
| Dɔwɔɖoɖo ƒe Nu vevi | Yevu, si me kɔ alo amadede PC core sheet | Tu nuŋlɔɖiwo ƒe titrime, sesẽme, opacity kple ememe layer integrity |
| Elektrɔnik Inlay Layer | PC -antenna kple chip inlay si sɔ | Chip ƒe nɔƒe, antenna tuning, nyaƒoɖeamenu mama kple post-lamination RF dɔwɔwɔ |
| Fesre / Dedienɔnɔ ƒe Ƒuƒoƒo | Transparent PC de eme alo fesre ƒe ƒuƒoƒo si wowɔ ɖe ɖoɖo nu | Fesre ƒe geometry, ŋkɔ ŋɔŋlɔ, nugbɔ fusion kple optical nyonyome |
| Trɔ Gbɔgbɔme Layers | Ahuhɔ̃e si wota, laserable kple Overlay film ɖoɖo abe alesi wowɔe ene | Titrime si da sɔ, gbadzaƒe, bɔbɔ ƒe nuwɔna kple nuŋlɔɖi ƒe sɔsɔme si wowu enu |
Polycarbonate ƒuƒoƒo siwo sɔ ate ŋu awɔ kaɖi ƒe ŋutilã si wɔ ɖeka le dzoxɔxɔ, nyaƒoɖeamenu kple fafa ƒe tsatsam si ŋu woda asi ɖo te. Dedienɔnɔ ƒe asixɔxɔa tso xɔtutu blibo si wobla ɖe wo nɔewo ŋu me: ele be woawɔ layer ƒe wɔwɔme, ink siwo wota, inlay design, fesrewo, Overlay film s kple ame ŋutɔ ƒe tɔtrɔ katã ɖekae.
Laserable PC dzesiwo ateŋu awɔ nuŋɔŋlɔ, xexlẽdzesiwo, nɔnɔmetatawo kple grayscale nyatakakawo le nuŋlɔɖi ƒe anyigba te. Ele be woado dzeside si wotia la akpɔ be vovototo le wo dome, woƒe vovototodedeameme, woƒe ŋkume ƒe goglome, ƒuƒoƒoa ƒe amadede ƒe tɔtrɔ kple ŋusẽkpɔɖeamedzi ɖe ƒuƒoƒo siwo te ɖe wo ŋu siwo me kɔ alo esiwo wota dzi hã.
Film ɣi siwo me mekɔ o ate ŋu aɣla antennawo eye woana agbalẽtata ƒe megbenya si dzi wokpɔna, gake film siwo me kɔ ate ŋu ado alɔ fesrewo kple nukpɔkpɔ ƒe dedienɔnɔ ƒe ɖoɖowo. Ele be woagblɔ nusiwo me mekɔ o, ɣie, afu kple anyigba ƒe nɔnɔme abe asixɔxɔ siwo woate ŋu adzidze ene le afisi nuŋlɔɖi ƒe wɔwɔme nɔ te ɖe wo dzi le.
Wozãa PC core sheets le elevated-temperature lamination systems me, gake didime ƒe dɔwɔwɔ nɔ te ɖe grade kple cycle dzi. Dzidze mɔ̃-mɔfiame kple transverse shrinkage, agbalẽ curl, nuwuwu titrime kple gbadzaa le dzoxɔxɔ kple fafa ŋutɔŋutɔ ƒe ɖoɖo megbe.
Nu vevi si sɔ nɔ te ɖe nuŋlɔɖi ƒe agbenɔƒe, ame ŋutɔ ƒe mɔ̃ɖaŋununya, nuwɔwɔ ƒe dɔwɔnuwo, gazazã ƒe taɖodzinu kple sedziwɔwɔ ƒe nudidiwo dzi. PC menye tiatia nyuitɔ le eɖokui si na asitsagbalẽvi ɖesiaɖe o, eye mele be woatsɔ PVC alo {[ PC PETG aɖo dedienɔnɔ ŋuti nuŋlɔɖi blibo si dzi woda asi ɖo me ne womegadze ake o.
| Tiatia ƒe Nu | Polycarbonate Nu vevi | PVC Nu vevi | PETG Nu vevi |
|---|---|---|---|
| Ðoɖowɔɖi Siwo Wowɔna Ðesiaɖe | Dukɔa ƒe ID-wo, ʋukugbalẽviwo, nɔƒe ƒe mɔɖegbalẽwo, mɔzɔgbalẽ ŋuti nyatakakawo ƒe axawo kple ɖaseɖigbalẽ siwo nɔa anyi didina siwo le dedie | Gadzraɖoƒe, hamevinyenye, nunana, amedzrodzeƒe, telefonkadodo kple asitsatsa ƒe agbalẽvi siwo wozãna le xexeame katã | Asitsagbalẽviwo kple xɔtuɖoɖo siwo ƒe dzoxɔxɔ bɔbɔ wu siwo nɔa anyi didina alo esiwo dzi ɖe kpɔtɔ- PVC tiatia |
| Lamination ƒe Dɔwɔɖoɖo | PC stack si sɔ kple dzoxɔxɔ si kɔkɔ wu kple fafa si dzi wokpɔna | PVC kaɖi lamination ƒe tsatsam si bɔ | PETG -koŋ alo esi sɔ kple hybrid cycle |
| Laser ƒe Ame ŋutɔ ƒe Nɔnɔmewɔwɔ | Taɖodzinu-wɔ laserable grades geɖe zãna na ememe ame ŋutɔ ƒe nɔnɔme | Zi geɖe la, eɖoa ŋu ɖe agbalẽtata alo ame ŋutɔ ƒe nɔnɔme bubu ŋu negbe ɖe wowɔe etɔxɛe hafi | Dzeside tɔxɛwo ate ŋu anɔ anyi; ɖo kpe laser ƒe nuwɔna ŋutɔŋutɔ dzi |
| Windows si me kɔ | Esɔ nyuie na full- PC transparent-window designs ne wowɔe abe stack ene | Ate ŋu adzɔ kple inserts alo Overlay film s gake fusion ƒe nuwɔna to vovo | Ate ŋu adzɔ le PETG xɔtuɖoɖo siwo sɔ me |
| Nusiwo Wotsɔ Tsakae | Zi geɖe la, dɔwɔwɔ nyuitɔ kekeake bia be woawɔ layer ƒome si sɔ si ŋu woda asi ɖo | Hybrid structures hiã na adhesion kple shrinkage dodokpɔwo | Hybrid xɔtuɖoɖowo hiã adhesion kple thermal-cycle dodokpɔwo |
| Ŋudzedzekpɔkpɔ | Nuŋlɔɖi dodokpɔ blibo, dedienɔnɔ ƒe ɖoɖowɔwɔ ƒe mɔɖeɖe kple dɔa koŋ ƒe lɔlɔ̃ ɖe edzi | Agbalẽtata, lamination kple nuwuwu-kaɖi ƒe kpeɖodzinana | Agbalẽtata, lamination, eƒe anyinɔnɔ kple nuwuwu-kaɖi ƒe kpeɖodzi |
PC woateŋu agblɔ nu veviwo le dziɖuɖu ƒe ɖaseɖigbalẽ siwo le ƒuƒoƒo geɖe me siwo bia be woawɔ kaɖi ƒe nɔnɔme si nɔa anyi didi, ememe laser ƒe ame ŋutɔ ƒe tɔtrɔ kple ɖekawɔwɔ kple nukpɔkpɔ alo elektrɔnik dedienɔnɔ ƒe nɔnɔmewo. Dɔwɔƒe si naa agbalẽa kple nuŋlɔɖi ƒe nɔnɔme si dzi woda asi ɖoe kpɔa alesi wòsɔ mlɔeba dzi.
Le mɔzɔgbalẽ ŋuti nyatakakawo ƒe axawo gome la, xɔtutua ƒe akpa ɖeka koe nye agbalẽvi vevitɔa. Ele be nuƒlelawo hã naɖe hinge ƒe ƒoƒo ɖekae, chip kple antenna ɖoɖo, fesre siwo me kɔ, layer ƒe ɖoɖo, ame ŋutɔ ƒe mɔ̃ɖaŋununya, axa ƒe sesẽ kple agbalẽvi ƒe kpekpe ƒe nudidiwo hã gɔme.
Ʋukugbalẽvi ƒe ɖoɖowo ateŋu azã PC ƒuƒoƒo siwo me mekɔ o eye wo me kɔ na nɔnɔmetata siwo wota, laser ƒe nɔnɔmetatawo, asikaka nu ŋu ƒe ŋusẽkpɔɖeamedziwo kple nyatakaka siwo mɔ̃ ate ŋu axlẽ. Ele be nusiwo woatsɔ axɔe nalɔ dimensional, optical, bending kple personalization dodokpɔwo ɖe eme.
Dɔwɔla, kpovitɔwo, asrafowo, lãmesẽnyawo kple mɔɖeɖe ƒe ɖaseɖigbalẽ siwo nɔa agbe didi ateŋu azã PC xɔtuɖoɖowo ne dɔa bia xɔtutu sesẽ kple ame ŋutɔ ƒe tɔtrɔ si dzi wokpɔna. Ele be woakpɔe ɖa be mɔ̃ɖaŋununya si woatsɔ age ɖe eme la sɔ ɖe wo nɔewo nu le vovo tso plastik-nutunua gbɔ.
PC -woateŋu atsɔ inlays siwo sɔ la ade layer stack si da sɔ me. Da asi ɖe antenna ƒe ɣeyiɣi ƒe didime, chip ƒe nɔƒe, module ƒe do, coil alo etched antenna geometry, lamination nyaƒoɖeamenu kple nuxexlẽ ƒe dɔwɔwɔ do ŋgɔ na ame ŋutɔ ƒe tɔtrɔ kple emegbe.
| Trɔ Asi Le Nu Ŋu | Tiatia Siwo Woatsɔ Adzro | Nyatakaka Siwo Wobia tso Nuƒlela Gbɔ Me |
|---|---|---|
| Eƒe Titrime Kple Agbalẽvi ƒe Agbɔsɔsɔme | 50–800μm ƒe didime, dzidzenu alo agbalẽ siwo wotso ɖe ɖoɖo nu | Layer tata, nuwuwu titrime, agbalẽvi ƒe lolome, collation kple lãɖeɖe ƒe ɖoɖo |
| Amadede kple Amadede si me mekɔ o | Amadede ɣi, si me kɔ alo esi wowɔ na dɔa koŋ | Amadede ƒe taɖodzinu, opacity alo gbeƒãɖeɖe ƒe nudidi, mɔɖeɖe ƒe mɔnu |
| Anyigba ƒe Nɔnɔme | Matte, matte nyui, glossy alo nɔnɔme si woɖo ɖi | Agbalẽtata ƒe ɖoɖo, agbalẽvi ƒe nuwuwu, asikaka taɖodzinu kple nuŋlɔɖi ƒe dzedzeme |
| Agbalẽtata ƒe Atikewɔwɔ | Offset, screen alo UV -si woateŋu ata le dzesi nu | Ink dzesi, dɔyɔyɔ ɖoɖo, dyne taɖodzinu kple adhesion mɔnu |
| Laser ƒe Ŋuɖoɖo | Non-laserable, laserable alo dɔ aɖe koŋ ƒe vovototo | Laser dɔwɔnuwo, ƒutsotsoe ƒe didime, ŋkuléle ɖe nu ŋu ƒe goglome, ameyibɔwo ƒe kpekpeme kple grayscale taɖodzinu |
| Film si Kpɔa Ame Ta | Ametakpɔnu si le akpa ɖeka alo akpa eve le afisi wòle | Peel mɔfiame, dzadzɛ-xɔ nudidiwo kple ewɔwɔ ŋudɔwɔwɔ |
| Nusiwo wobla ɖe agba me | Kakɛwo, palletwo, tsi ƒe mɔxenu kple ame ŋutɔ ƒe ŋkɔwo | Pack agbɔsɔsɔme, pallet seɖoƒewo, yiyi kple batch traceability format |
Miɖo nuŋlɔɖiwo ƒe ƒuƒoƒoa ɖa: na ƒuƒoƒo ƒe nɔnɔmetata si me titrime, dɔwɔwɔ, amadede, agbalẽtata, laser kple elektrɔniknuwo le na ƒuƒoƒo ɖesiaɖe.
Ðo kpe ame si di be yeaxɔ hehea ƒe dzesiwo dzi: de vovototo nu veviwo, esiwo woate ŋu ata, esiwo woate ŋu ata laser, esiwo womate ŋu atsɔ laser o kple esiwo ŋu wofa nu ɖo hafi woatso kpɔɖeŋuwo.
Run incoming inspection: ŋlɔ titrime, didime, gbadzaƒe, dzedzeme, amadede, ametakpɔ film kple batch dzesidede.
Ta ewɔwɔ ƒe kpɔɖeŋuwo: zã offset ŋutɔŋutɔ, screen alo UV ink, curing settings kple artwork coverage.
Laminate the full stack: zã gakpo gbadzɛ siwo ŋu wowɔ ɖoɖo ɖo, cushions, release layers, nyaƒoɖeamenu, dzoxɔxɔ kple fafa ƒe ɖoɖo.
Do ame ŋutɔ ƒe nɔnɔme kpɔ: da laser ƒe vovototo, grayscale, focal depth, text resolution kple kadodo kple nusiwo wota alo esiwo me kɔ la kpɔ.
Nuŋlɔɖi dodokpɔ blibo: lé ŋku ɖe lãgbalẽ ƒe tsitretsitsi, gbadzaƒe, ƒoƒo, torsion, nugbɔ ƒe nyonyome, fesre ƒe ŋkɔ ŋɔŋlɔ kple RFID dɔwɔwɔ le afisi wòsɔ le.
Da asi ɖe Sika Kpɔɖeŋu dzi: de asi xɔtutu, dɔwɔwɔ ƒe fesre, ŋkuléleɖenuŋu mɔnu, nubablɛ kple nusiwo gblẽ ƒe dzidzenu siwo dzi woda asi ɖo hafi woatsɔe ana le agbɔsɔsɔ gã me.
Dzro Wò PC Kpekpeɖeŋugbalẽvia me kple Wallis
| Dzodzro ƒe Akpa | si Wokafu Dzesidede | B2B Lɔlɔ̃ Ðe Edzi ƒe Gɔmeɖoanyi |
|---|---|---|
| Nyatakaka Siwo Vana | Titrime ƒe anyigbatata, agbalẽ ƒe didime, dzogoe ene me, gbadzaƒe, anyigba ƒe nɔnɔme madeamedziwo, ametakpɔnu film kple batch label | Woda asi ɖe nɔnɔme tɔxɛ, kpɔɖeŋuɖoɖo kple dzidzedze ƒe mɔnu si wodo kpɔ |
| Nukpɔkpɔ ƒe Nɔnɔmewo | Yevunyenye, amadede ƒe vovototo, opacity, kaka, haze kple gloss le afisi wòsɔ le | Dɔwɔnu si nuƒlela ɖe fia, kekeli, megbedede kple mɔɖeɖe ɖe nu ŋu |
| Agbalẽtata | Dyne ƒe dzidzeme, tsidzadza, nɔnɔmetata ƒe kpekpeme, ink ƒe adhesion, dɔyɔyɔ, mɔxexe kple amadede ƒe ɖekawɔwɔ | Ink system ŋutɔŋutɔ kple kpɔɖeŋu si wota si dzi woda asi ɖo |
| Lamination | Layer ƒe ŋkɔ ŋɔŋlɔ, fusion, peel nuwɔna, shrinkage, curl, bubbles, plate release kple nuwuwu titrime | Woda asi ɖe blibo-stack tsatsam kple fafa kpɔɖeŋu |
| Laser ƒe Ame ŋutɔ ƒe Nɔnɔmewɔwɔ | Vovototo, grayscale, resolution, focal depth, nyatakaka siwo wogbugbɔ gblɔ kple edge artifacts | Laser ɖoɖo ŋutɔŋutɔ kple ame ŋutɔ ƒe nɔnɔmetata si dzi woda asi ɖo |
| Elektrɔnikmɔ̃wo ƒe Dɔwɔwɔ | Chip ƒe dɔwɔwɔ, antenna ƒe yiyi, frequency response kple nuxexlẽ ƒe didime do ŋgɔ na lamination kple emegbe | Nuxlẽla si wogblɔ, dodokpɔ ƒe nɔƒe kple nuŋɔŋlɔ ƒe nɔnɔme |
| Dzimetɔtrɔ | Ku lãɖeɖe, milling, punching, nugbɔ ƒe nyonyome, didimewo kple module cavity nɔnɔme | Woda asi ɖe nutata kple anyime dɔwɔnuwo ƒe mɔɖeɖe ɖe nu ŋu |
| Nusiwo wobla ɖe agba me | Anyigba takpɔkpɔ, tsidzadza mɔxenu, pack agbɔsɔsɔme, pallet nɔnɔme kple traceability dzesiwo | Nuƒle ƒe ɖoɖo kple nubablɛ ŋuti mɔfiame si dzi woda asi ɖo |
| De Dzesidede | Nusiwo Ate Ŋu Atso Nuwo | Gbɔ Kple Afɔɖeɖe Siwo Woatsɔ Aɖɔe Ðo Ðe Edzi |
|---|---|---|
| Gbɔdzɔgbɔdzɔ Layer Bonding | Dzeside si mesɔ o, dzoxɔxɔ si mesɔ o, nyaƒoɖeamenu si mesɔ o, ink mɔxenu si woda alo ɖiƒoƒo | Ðo kpe layer ƒomea kple mɔfiame dzi; lé ŋku ɖe nuŋlɔtsi ƒe nutsyɔnu ŋu; trɔ asi le dzoxɔxɔ, nyaƒoɖeamenu kple fesre si dzi woda asi ɖo ŋu |
| Kpekpeɖeŋugbalẽvi ƒe Ʋuʋu alo Warpage | Stack si meda sɔ o, mɔfiame ƒe shrinkage, dzoxɔxɔ si mesɔ o alo nyaƒoɖeamenu ƒe dodo kaba | Dadasɔ layer ƒe titrime; ŋlɔ MD/TD ƒe mɔfiame ɖi; fa miamiamia le nyaƒoɖeamenu si dzi wokpɔ ŋusẽ ɖo me |
| Laser ƒe Vovototo si bɔbɔ | Dzeside si mesɔ o, focal depth si mesɔ o, ŋusẽ si le sue alo laserable layer si woɖo ɖe teƒe si goglo akpa | Kpɔ egbɔ be wowɔe kple layer ƒe nɔnɔme; optimize laser parameters zã dodokpɔ matriki si dzi wokpɔna |
| Laser ƒe Viviti si Womedi O | Nusiwo wozãna le laser-sensitive le afisiwo wòhiã be woawɔ nusi me kɔ si mewɔa dɔ o | Tsɔ film si ŋu woɖo kpee si menye laserable o ɖɔ li alo gbugbɔ trɔ asi le focal strategy kple layer sequence ŋu |
| Ink ƒe Delamination | Ŋusẽ si le anyigba dzi si bɔbɔ, ink si mewɔ ɖeka o, dɔyɔyɔ si mede blibo o alo ink ƒe nutsyɔnu kpekpe | Kpɔ dyne kple ƒe si woxɔ le atikewɔwɔ me ɖa; do ink ƒe adhesion kpɔ do ŋgɔ na lamination kple emegbe |
| Antenna alo Chip si woate ŋu akpɔ | Opacity si mesɔ gbɔ o, nu vevi si le tsɛ, akpa ƒe ɖoɖo si menyo o alo nyaƒoɖeamenu ƒe dzesi | Dzi opacity si ŋu woda asi ɖo ɖe edzi; gbugbɔ trɔ asi le layer dadasɔ kple inlay cavity ŋu; da cushion kple gakpo gbadzɛ ƒe ɖoɖoa kpɔ |
| Fesre ƒe Ŋkɔ ŋɔŋlɔ ƒe Vodada | Lã nusiwo wotsɔ de eme ƒe mɔɖeɖe, collation ʋuʋu alo dzoxɔxɔ ƒe shrinkage | Ðe X/Y ƒe ŋkɔ ŋɔŋlɔ ƒe mɔɖeɖe ɖe nu ŋu gɔme; zã dzesi siwo wotsɔ ɖoa nuwo ɖe ɖoɖo nu eye nàdzidzee le fafa vɔ megbe |
Ele be PC agbalẽwo nanɔ dzadzɛ, woanɔ gbadzaa eye woakpɔ wo ta tso tsidzadza, ke, ʋuʋudedi kple dzoxɔxɔ ƒe tɔtrɔ si gbɔ eme me. Na nuwo nanɔ woƒe babla gbãtɔ me vaseɖe esime woazã wo, na nusiwo wowɔ le nɔnɔme nyui me naɖo xɔ si me wowɔa nu le ƒe nɔnɔme me hafi woaʋui, eye nàwɔ ɖe ŋgɔdonya gbãtɔ dzi le afisi ƒe si wotsɔ wɔa dɔ le anyigba dzi kpɔa ŋusẽ ɖe agbalẽtata dzi le.
Zã ametakpɔnu film, interleaving alo clean wrapping si sɔ ɖe anyigba si nètia la nu.
Dzra agbalẽawo ɖo gbadzaa ɖe pallet siwo wodo alɔe dzi eye nàƒo asa na agba siwo le teƒe ɖeka siwo ate ŋu ahe curl vɛ.
Takpɔ kakɛwo tso tsidzadza me le nudzraɖoƒewo tsɔtsɔ yi teƒe bubuwo kple wo ɖoɖo ɖe dukɔwo dome.
De dzesi dzeside, titrime, anyigba, akpa si woate ŋu ata, batch xexlẽdzesi kple agbɔsɔsɔme le agbalẽvi ɖesiaɖe dzi.
Na laserable kple non-laserable grades naɖe wo nɔewo ɖa ŋutɔŋutɔ be woaxe mɔ ɖe ewɔwɔ ƒe tsakatsaka nu.
Wallis naa kaɖi-nu ƒe ɖoɖowo tsɔ wu be wòawɔ nu ɖe PC film ɖesiaɖe ŋu abe nu ɖeka ene. B2B ƒe numetoto ateŋu aƒo nu tso core sheets, printable layers, transparent Overlay film s, laserable films, inlay structures kple packaging ale be nuƒlelawo ateŋu atsɔ nusiwo wodo ɖa la asɔ kple nuŋlɔɖi blibo ɖeka.
Dɔwɔwɔ-si wotu ɖe dzesi tiatia dzi: de vovototo opacity, agbalẽtata, laser ŋuɖoɖo kple Overlay film dɔwɔwɔ.
Trɔtrɔ ɖe ɖoɖo nu: titrime, didime, anyigba, amadede kple ametakpɔnu bablawo na wɔwɔ ƒe ɖoɖowo.
Kpɔɖeŋu-gbãtɔ ƒe kpeɖodzi: nuwo na agbalẽtata, lamination, laser kple nuwuwu-nuŋlɔɖi dodokpɔwo.
Batch kadodo: nuƒle ƒe nɔnɔmewo, ŋkɔwo kple nyonyome dzidzenuwo na gbugbɔgatsɔtsɔ.
Nudɔdɔ ƒe ɖoɖowɔwɔ: ametakpɔnu babla kple meliɖoɖo ƒe kpekpeɖeŋu na kaɖi dɔwɔƒewo, mamalawo kple dedienɔnɔ-nuŋlɔɖiwo ƒe kontraktɔ.
Bia B2B PC Core sheet Kpɔɖeŋuwo kple Asixɔxɔ
Enye PC ƒuƒoƒo si me mekɔ o, si me kɔ alo amadede le si wozãna le ƒuƒoƒo geɖe ƒe kaɖi alo nuŋlɔɖi me. Le dzeside nu la, ate ŋu ana wɔwɔme, opacity, printability alo controlled laser response. Mele be woatɔtɔe le eɖokui si kple ametakpɔnu si me kɔ Overlay film o.
Fifia ƒe didime nye 50–800μm. Ele be woabu akɔnta le titrime si wotia ŋu ɖekae kple Overlay film s, ƒuƒoƒo siwo woate ŋu ata, ƒuƒoƒo siwo woate ŋu ata la, elektrɔnik nusiwo wotsɔ de eme kple taɖodzinu si wowu-nuŋlɔɖi ƒe titrime.
Ao, laser ƒe dzesidede nɔ te ɖe alesi wowɔe kple afisi woɖo be woatsɔ aƒoe ɖo dzi. Tsɔe gblɔ nenye be ele be ƒuƒoƒoa nanye non-reactive, grayscale laserable alo high-contrast laserable, emegbe doe kpɔ kple laser dɔwɔnu ŋutɔŋutɔ.
Woateŋu ada dzesi siwo woateŋu ata la akpɔ hena offset, silk-screen kple UV tata. Ðo kpe akpa si woate ŋu ata, dyne ƒe dzidzeme, ink ɖoɖo, dɔyɔyɔ ƒe nɔnɔmewo kple adhesion le lamination megbe hafi asitsatsa ewɔwɔ.
Wo ame evea siaa ate ŋu awɔ nu ɖe laser ƒe ŋusẽ ŋu, gake woxɔa nɔƒe vovovowo eye wowɔa dɔ vovovowo le xɔtuɖaŋu alo nukpɔkpɔ me. Tiatia la kpɔa ŋusẽ ɖe susu ƒe goglome, nɔnɔmetata ƒe dzedzeme, nukpɔkpɔ le gaglãgbe kple dedienɔnɔ-nɔnɔmewo ƒe ɖoɖowɔwɔ dzi.
Ne woda asi ɖe dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ, fafa ƒe nuwɔna, kadodo, ʋuʋu kple kaɖi si wowu enu ƒe anyinɔnɔ dzi ko hafi woate ŋu awɔ xɔtuɖoɖo si wotsɔ tsaka. Mègasusu be nusi wowɔ na full- PC stack awɔ ɖeka kple PVC alo PETG nyuie o.
Xexeame katã ƒe nɔnɔme aɖeke meli o. Dzoxɔxɔ, nyaƒoɖeamenu, nɔƒe, ramp ƒe tsɔtsɔme kple fafa nɔ te ɖe grade, agbalẽ ƒe titrime, ink ƒe nutsyɔtsyɔ, inlay structure, plate system kple total stack dzi. Ðo ewɔwɔ ƒe fesrea anyi to dodokpɔ siwo dzi wokpɔna me.
Woate ŋu adae kpɔ abe ƒuƒoƒo ɖeka ene le nyatakaka-axa ƒe ɖoɖo blibo me. Ele be dɔa nada asi ɖe hinge tutu, fesre siwo me kɔ, elektrɔnik akpawo, lamination, laser personalization, agbalẽvi ƒoƒo ƒu kple eɖeɖe-ŋusẽ ƒe nudidiwo dzi ɖe vovo.
Ao, nuŋlɔɖiwo ƒe dedienɔnɔ tsoa ɖaseɖigbalẽ bliboa ƒe nɔnɔme kple ewɔwɔ si dzi wokpɔna me, si me nuwo, agbalẽtata, laser ƒe ame ŋutɔ ƒe nɔnɔme, elektrɔnikmɔ̃wo ƒe akpa aɖewo, dedienɔnɔ ƒe nɔnɔmewo, ena kple kpeɖodzinana ƒe ɖoɖowo hã le.
Ẽ, le dzeside kple ewɔwɔ ƒe ŋutete nu. Na amadede, opacity, haze, gloss alo texture taɖodzinu siwo woate ŋu adzidze eye nàɖe alesi nuƒlela ada asi ɖe wo dzii la me.
Na woanɔ dzadzɛ, woaƒu, woanɔ gbadzaa eye woakpɔ wo ta le nubablɛ gbãtɔ me. Ƒo asa na tsidzadza, ke kple anyigba ƒe nugbegblẽ. Tsɔ agba siwo womeʋu o la ɖo nɔnɔme si me wowɔa wo le hafi nàzã wo ne nudzraɖoƒe kple xɔme ƒe dzoxɔxɔ to vovo.
Do eƒe titrime, agbalẽtata, ink ƒe adhesion, lamination, shrinkage, flatness, peel behavior, laser contrast, lãɖeɖe kple RFID dɔwɔwɔ kpɔ le afisi wòsɔ le. Da asi ɖe Sika Kpɔɖeŋu kple lɔlɔ̃ ɖe edzi ƒe dzidzenu siwo woŋlɔ dzi.
Na dɔdamɔnua, ƒuƒoƒo ƒe nɔnɔmetata, titrime, agbalẽa ƒe lolome, amadede, opacity, anyigba, agbalẽtata ƒe ɖoɖo, laser ƒe nudidi, ƒe sia ƒe ƒe lolome, kpɔɖeŋu ƒe hiahiãwo, babla kple teƒe si woayi.
| RFQ Nu Ŋuti | Nyatakaka Siwo Woana |
|---|---|
| Nuŋlɔɖiwo ƒe Dɔbiagbalẽvi | Dukɔa ƒe ID, ʋukugbalẽvi, nɔƒe ƒe mɔɖegbalẽ, mɔzɔgbalẽ ŋuti nyatakakawo ƒe axa, mɔɖeɖe ƒe ɖaseɖigbalẽ alo ɖoɖo bubu aɖe |
| Layer Dɔwɔwɔ | Opaque core, transparent core, printable layer, laserable layer alo non-laserable Overlay film |
| Dzidzemewo | Titrime, agbalẽ ƒe lolome, teƒe si woate ŋu azã, nuku / extrusion mɔfiame kple didime mɔɖeɖe |
| Nudidi Siwo Le Nukpɔkpɔ Ŋu | Amadede, ɣie, opacity, kaka, haze, gloss kple anyigba ƒe nɔnɔme |
| Agbalẽtata | Offset, screen alo UV dɔwɔwɔ, ink ƒe dzesi, dɔyɔyɔ ƒe ɖoɖo kple nutata ƒe nutsyɔtsyɔ |
| Laser zazã | Mɔ̃, ƒutsotsoe ƒe didime, susu ƒe mɔnu, taɖodzinu ƒe vovototo, grayscale kple ƒuƒoƒo ƒe goglome si woɖo |
| Lamination | Blibo stack, plate kple cushion ɖoɖo, dzoxɔxɔ, nyaƒoɖeamenu, nɔƒe kple fafa |
| Elektrɔnikmɔ̃wo | Chip, antenna, module, fesre alo hinge ƒe ƒoƒo ɖekae le afisi wòsɔ le |
| Asitsatsa Ŋuti Nyatakakawo | Kpɔɖeŋu agbɔsɔsɔme, dodokpɔ ƒe agbɔsɔsɔme, ƒe sia ƒe ƒe nyagblɔɖi, teƒe si woayi kple nubablɛ ƒe nudidi |
