|
Wallis - Mpempe akwụkwọ PLA
| Agba: | |
|---|---|
| nha: | |
| Ihe: | |
| Ngwa: | |
| uru: | |
| Ọnụọgụ: | |
Emebere WALLIS ihe mpempe akwụkwọ kaadị PLA omenala maka ndị na-emepụta kaadị, ndị na-ebi akwụkwọ, {[t69 RFID ndị na-atụgharị inlay, ndị na-ebubata kaadị onyinye na mmemme kaadị lekwasịrị anya nkwado na-achọ ihe dabere na bio dabere na ihe eji eme ihe PVC . Nhọrọ ndị dị na-agụnye mpempe akwụkwọ ọcha, nghọta, ojii na nke omenala n'ọtụtụ nlele maka cores ebipụtara, Overlay film s, kaadị nkwado, kaadị ndị otu, kaadị igodo ụlọ oriri na ọṅụṅụ na ihe owuwu RFID ahọpụtara.
Mmepụta kaadị PLA na-eji windo usoro dị iche site na PVC , PETG na polycarbonate. Ink mbipụta, ọgwụgwọ elu, nhazi akwụkwọ, okpomọkụ lamination, nrụgide, jụrụ oyi, nhọrọ nrapado, igbutu ọnwụ na ule kaadị emecha kwesịrị ịkwado dị ka otu usoro. A na-atụ aro nnwale nnwale tupu mmepụta nnukwu, ọkachasị maka multilayer, RFID , ndọta-stripe na ọrụ kaadị ogologo ọrụ.
'Bio dabeere,' ' biodegradable, ' ' compostable n'ọrụ mmepụta ihe' na ' recyclable' na-akọwa dị iche iche gburugburu ebe obibi. Ihe ọ bụla a na-ekwu kwesịrị dakọbara kpọmkwem ọkwa PLA yana ihe owuwu kaadị emechara. Chips, antennas, ink, Overlay film s, adhesives, magnetik ọnyá na mkpuchi nwere ike ịgbanwe ụzọ ọgwụgwụ nke ndụ ma nwee ike igbochi kaadị emechara ka ọ ghara iru eru maka nkwupụta composability.
| Ụdị ngwaahịa | Mpempe akwụkwọ isi kaadị PLA, mpempe akwụkwọ a na-ebi ebi yana kaadị Overlay film akọwapụtara nke ọma |
| Ọkpụrụkpụ Ọkọlọtọ | 0.08mm, 0.15mm, 0.17mm, 0.20mm na 0.35mm; nlele ndị ọzọ dabere na nyocha mmepụta |
| Nha mpempe akwụkwọ ọkọlọtọ | 300 × 480mm ma ọ bụ ahaziri nha dị ka mbipụta na nhazi kaadị chọrọ |
| Nhọrọ agba | White, doro anya, translucent, ojii ma ọ bụ agba ahaziri n'okpuru MOQ na nhazi |
| Ngwa kaadị | Onyinye, otu, iguzosi ike n'ihe, mmemme, igodo họtel, azụmahịa, nkwado na kaadị RFID ahọpụtara |
| Ọrụ B2B | Ibé akwụkwọ nlele, nlele omenala, nnwale mbipụta, nnwale lamination, nyocha nhazi kaadị, nkọwa QC na ọkọnọ mbupụ. |
Rịọ kaadị mpempe akwụkwọ PLA na nsonye
Polylactic acid, nke a na-akpọkarị PLA, bụ polyester thermoplastic nke enwere ike imepụta site na nri nri sitere n'osisi a na-emegharị ọhụrụ. Maka imepụta kaadị, a na-atụgharị PLA ka ọ bụrụ mpempe akwụkwọ dị larịị nke nwere ike ije ozi dị ka oyi akwa e biri ebi, oyi akwa ịchọ mma, oyi akwa transperent ma ọ bụ oyi akwa nkwado na nhazi kaadị laminated.
Mbido PLA nwere ike megharia anaghị ekwe nkwa ịdịgide kaadị na-akpaghị aka, nrapado bipụta ma ọ bụ composite. Resin ọkwa, crystallinity, ihe mgbakwunye, pigmenti, mpempe akwụkwọ nghazi na owuwu kaadị na-ekpebi ihe ikpeazụ n'ibu, thermal na gburugburu ebe obibi Njirimara.
A haziri ọtụtụ ngwaahịa PLA maka ịkwakọba ahịhịa ụlọ ọrụ na-ejikwa ọkụ, mmiri mmiri na ikuku jikwaa. Ekwesighi ịkọwa mpempe akwụkwọ PLA dị ka ọ na-apụ n'anya ngwa ngwa n'ime mkpofu ahịhịa, ala nkịtị, osimiri ma ọ bụ oke osimiri. A ga-enyocharịrị kaadị emechara dị ka ihe zuru oke tupu ejiri akara ngosi ma ọ bụ nkwupụta compostability.
Ibé akwụkwọ PLA zuru oke na-ekpo ọkụ nwere ike ọ gaghị enye ịdị larịị, adịghị ike elu, mbipụta ma ọ bụ omume lamination achọrọ maka mmepụta kaadị. Ndị na-azụ ahịa kwesịrị ịrịọ nkọwapụta ọkwa-kaadị wee jiri igwe nbipụta ha, ink, Overlay film s na laminators nwalee mpempe akwụkwọ.
Mpempe akwụkwọ PLA maka nrụpụta kaadị na-adịgide adịgide
| Oke | nkọwapụta / ihe achọrọ |
|---|---|
| Ihe onwunwe | PLA ma ọ bụ ụkpụrụ ọkwa ọkwa PLA gbanwetụrụ; Ekwesịrị iji koodu ngwaahịa kpochie ya kpọmkwem resin na ngwungwu mgbakwunye |
| Ọkpụrụkpụ | 0.08, 0.15, 0.17, 0.20 na 0.35mm ma ọ bụ ahaziri; ekwesịrị ịnakwere ndidi maka nlele ọ bụla |
| Nha mpempe akwụkwọ | 300 × 480mm ma ọ bụ ahaziri usoro dabere na ntinye, akwa akwa na efere lamination |
| Ike ọdụdọ | Ntuziaka igwe ≥25MPa (uru ntụaka); kwadoro usoro ule ekwenyero, ntụzịaka na ntụgharị ntụgharị maka usoro ọ bụla |
| Ọdịdị dị n'elu | 0.8-3.0μm nso nso; họrọ dị ka mbipụta, njide ink na lamination chọrọ |
| Emecha elu elu | Matte, ọkara matte, kenkowaputa, corona-agwọta ma ọ bụ mkpuchi elu elu nke nwere ike ịhazi ule. |
| Agba | Ọcha, transperent, ojii, Pantone omenala ma ọ bụ ọkwa na-achịkwa opacity nke dabere na nhazi na MOQ |
| Nkwakọ ngwaahịa | Mpempe akwụkwọ dị larịị nwere ihe nkiri nchebe ma ọ bụ ihe na-emekọrịta ihe, ịkwakọ ihe mgbochi mmiri, katọn na nchekwa pallet |
A na-ewukarị kaadị njirimara emechara site n'ọtụtụ ọkwa karịa otu mpempe akwụkwọ siri ike. ISO /IEC 7810 na-achọpụta usoro kaadị ID-1 a na-ahụkarị na ihe dịka 85.60 × 53.98mm nwere ọkpụrụkpụ ọnụ nke 0.76mm. Ngwakọta oyi akwa PLA kwesịrị ekwesị ga-aza ajụjụ maka ibipụta, nrapado, Overlay film , mgbawa ma ọ bụ ọkpụrụkpụ antenna yana mbelata nke lamination.
| Layer | Nlebanya | oru ngo PLA na- ahụkarị |
|---|---|---|
| N'ihu Overlay film | Na-echebe ebipụta ma na-enye imecha elu | Kwenye njikọ, idoanya, nguzogide ntu na ndakọrịta gburugburu |
| Ebipụtara Mpempe isi | Na-ebu eserese, ederede, imewe nchekwa na agba okirikiri | Usoro ọgwụgwọ elu na ink ga-adị ndụ lamination na-enweghị mgbanwe agba ma ọ bụ delamination |
| Isi isi | Na-ewulite ọkpụrụkpụ, opacity na ekwe isi ike | Jiri ntuzi aka ziri ezi na ihe owuwu ihe atụ iji belata curl |
| RFID Inlay oyi akwa | Nwere mgbawa na antenna maka ọrụ enweghị kọntaktị | Akaụntụ maka ọkpụrụkpụ inlay, eriri antenna, oghere mgbawa na nrụgide lamination |
| Mpempe akwụkwọ Ebipụtara azụ / Overlay film | Na-enye ndịna-emeputa ntụgharị na nchebe elu | Hazie akwa ihu na azụ iji jikwaa mgbanwe akụkụ |
N'ihu na azụ azụ na-enweghị nhata nwere ike ịmepụta curl mgbe ikpo ọkụ na jụrụ oyi. Ebe enwere ike, jiri nlele dakọtara, mkpuchi mbipụta yiri ya na s Overlay film kwụ ọtọ n'akụkụ abụọ. Ekwesịrị ịlele kaadị emechara ka emechara, ọ bụghị naanị ozugbo lamination gachara.
Ink, nrapado, RFID inlay, eriri magnetik na mkpuchi mkpuchi niile na-enye aka na ọkpụrụkpụ ikpeazụ. Mpempe akwụkwọ aha n'ọnụ nke na-agbakọta 0.76mm tupu lamination nwere ike ọ gaghị emepụta kaadị emechara nke ọma mgbe mkpakọ na mbelata.
| usoro nkwadebe dị n'elu ka nkwado | enwere ike iji | ya mee ihe |
|---|---|---|
| Mbipụta akwụghị ụgwọ | Mpempe akwụkwọ dị elu nwere agba nhazi, Pantone na ndabere nchekwa | Ntinye ink, ihicha, igbochi, njupụta agba na nguzogide lamination |
| UV Inkjet | Ọsọ dị mkpụmkpụ, nhazi nkeonwe, eserese serial na prototyping | Ike elu, ọkwa ọgwụgwọ, mgbanwe, isi na njikọ Overlay film |
| Mbipụta ihuenyo | Ọcha na-adịghị ahụkebe, ọla, agba ntụpọ na ọkwa na-arụ ọrụ | Ọkpụrụkpụ ink, ndakọrịta ihe mgbaze, ọgwụgwọ na njikọ lamination |
| Indigo / Digital Printing | Data dịgasị iche iche, obere ọsọ na mmemme kaadị ahaziri iche | Ndakọrịta mbụ, okpomoku blanketị, adhesion toner na lamination ala |
| Nhazi nke okpomọkụ / Nyefee | Nọmba kaadị emechara, foto, koodu mkpọchi na nzere | Mkpughe ọkụ, mbufe rịbọn, ịdị larịị na nnwale njem nbipute |
Ọgwụ Corona nwere ike ire ere n'oge nchekwa. Ndị na-azụ ahịa na-eji UV inkjet, mbipụta ihuenyo ma ọ bụ mkpuchi pụrụ iche kwesịrị ikwekọrịta na ọkwa dyne lekwasịrị anya, usoro nnwale na oge nchekwa kachasị tupu ebipụta.
Ezigbo nrapado mbipụta mbụ anaghị ekwe nkwa iguzogide okpomọkụ, nrụgide na kọntaktị nrapado. Ekwesịrị ịkwanye akwụkwọ ndị ebipụtara, mee ka ọ dị mma na bee tupu akwadoro ọrụ nka na ink.
Mpempe akwụkwọ kaadị PLA enwere ike ibipụta
Lamination na Ntụgharị Ọnwụnwa
PLA na-adị nro na obere okpomọkụ karịa PVC , PETG ma ọ bụ ihe kaadị polycarbonate. Ntụziaka lamination ọkọlọtọ PVC nwere ike ibute oke mbelata, akara elu, mgbagha, igbochi ma ọ bụ mmebi mgbawa. Ekwesịrị ịmepụta okirikiri ziri ezi site na iji ngwugwu oyi akwa na akụrụngwa.
Hazie mpempe akwụkwọ ahụ: Chekwaa ma hazie mpempe akwụkwọ PLA, akwa ebipụta na inlays n'okpuru ọnọdụ okpomọkụ na iru mmiri na-achịkwa.
Kwenye nghazi: Debe igwe na ntụgharị ntụgharị n'otu n'otu n'ime ngwugwu iji jikwaa mbelata.
Malite na okirikiri okpomọkụ na-agbanwe agbanwe: Jiri nnwale dị ala karịa okirikiri PVC ma na-abawanye naanị mgbe ị tụlechara ike na akụkụ.
Nhazi okpomọkụ, nrụgide na ebe obibi: oke nrụgide nwere ike akara elu ma ọ bụ mebie ihe RFID ; ezughị oke ike nwere ike ime ka delamination.
Jụụ n'okpuru nrụgide a na-achịkwa: Ịjụ oyi na-emetụta flatness, shrinkage na igbochi.
Ọnọdụ tupu nha: Lelee akụkụ, curl, adhesion na ọkpụrụkpụ kaadị mgbe oge mgbake ekwekọrịtara.
Kpochie uzommeputa akwadoro: Ụdị efere ndekọ, ntụzịaka nchịkọta, profaịlụ okpomọkụ, nrụgide, oge na ọnọdụ jụrụ oyi.
Ụfọdụ n'ígwé PLA dakọtara nwere ike ijikọ na-ekpo ọkụ, ebe ihe ndị ọzọ na-achọ ihe nrapado ma ọ bụ tie oyi akwa. Ekwesịrị ịtụle usoro njikọ ahọpụtara maka ike bee, ịka nká, ndakọrịta mbipụta yana mmetụta ya na nkwupụta gburugburu ebe obibi.
Efere na-egbuke egbuke, matte na textured na-emepụta ọdịdị elu dị iche iche na omume ntọhapụ. Nwalee ihe nkiri mwepụta na efere emechara maka ịrapagidesi ike, haze, gloss mgbanwe na nnyefe ederede achọghị.
| Ntụgharị nzọụkwụ | igodo njikwa |
|---|---|
| Mpempe akwụkwọ guillotine ịkpụ | Mpempe akwụkwọ dị nkọ, nchịkọta akwadoro, nrụpụta ọkụ dị obere yana izi ezi akụkụ |
| Ịkụkụ kaadị | Mwepu ngwá ọrụ, okpomọkụ, nhazi kaadị na enweghị mgbawa nkuku |
| Slot na oghere Punching | Nchacha ihu, nghọta notch, ọnọdụ oghere na nkwụgide ibu |
| Chip Cavity Milling | Ịcha ọsọ, okpomọkụ, iwepụ uzuzu, omimi oghere na nrapado bonding |
| Nyocha Edge | Burrs, delamination, cracks, whitening, sharpness and layer registration |
Enwere ike ịtụle mpempe akwụkwọ PLA maka kaadị enweghị kọntaktị, mana mpempe akwụkwọ bụ naanị otu akụkụ nke sistemụ. Antenna, mgbawa, mkpụrụ inlay, nrapado na okirikiri lamination ga-anọgiderịrị na ọkụ eletrik na igwe kwụsie ike n'oge mmepụta na ọrụ kaadị.
| Kaadị smart | Ihe nkwado chọrọ |
|---|---|
| RFID Ugboro na mgbawa | Kwenye usoro onye na-agụ, ezinụlọ mgbawa, ebe nchekwa, protocol na ntinye koodu tupu ị wuo ihe nlele |
| Geometry nke antenna | Gbaa mbọ hụ na ọnụ kaadị, ọnọdụ mgbawa na nhazi ịkpụ adịghị emebi antenna |
| Inlay Nkwekọrịta | Lelee ndakọrịta nrapado, nguzogide okpomọkụ, ihe efu na delamination ogologo oge |
| Gụọ Arụmọrụ | Nwalee anya ọgụgụ, nghazi, nnyonye anya ngwugwu kaadị yana ndakọrịta mkpọchi/agụ |
| Mkpesa gburugburu | Akọwakwala kaadị eletrọnịkị ka ọ ga-emebi emebi ma ọ bụrụ na enwetara ihe zuru oke |
| Ngwa | lekwasịrị anya | nnwale dị egwu |
|---|---|---|
| Onyinye na kaadị iguzosi ike n'ihe | Nbipụta dị elu, koodu mkpọchi, eriri magnetik ma ọ bụ nhọrọ RFID | Ndakọrịta nke ngwa nbipute, iji obere akpa, na-ehulata na ndụ mmemme a na-atụ anya ya |
| Kaadị igodo nkwari akụ | Kaadị RFID dị mkpụmkpụ nwere eserese akara na ndakọrịta sistemụ mkpọchi | Chip dakọtara, itinye koodu, ọrụ onye na-agụ, iru mmiri na njikwa ugboro ugboro |
| Ihe omume na kaadị ndị ọbịa | Ịnweta obere oge, akara ngosi, ntinye oghere na data mgbanwe | Ibu Lanyard, ịdịte aka bipụta na ụzọ mkpofu mmemme |
| Kaadị ndị otu | Kaadị ebipụta na ahaziri onwe maka klọb, gyms na mmemme mkpọsa | Atụ anya ndụ ọrụ, abrasion, ịgbagọ na njem nbibi kaadị |
| Kaadị azụmahịa na nkwalite | Emecha a na-ahụ anya adịchaghị, nghọta, agba pụrụ iche na nhazi oge dị mkpụmkpụ | Bipụta adhesion, iguzogide ọkọ, ịdị mma ihu yana flatness nchekwa |
| RFID kaadị nnweta | Owuwu kaadị na-enweghị kọntaktị yana inlay dakọtara na lamination dị obere okpomọkụ | Ịrụ ọrụ eletrik, ngbanwe, delamination na ndakọrịta ndị na-agụ |
Onyinye, Kaadị otu na nkwalite
Mmemme kaadị PLA emechara
| ihe eji | ike | eme oke oke |
|---|---|---|
| PLA | Enwere ike dabere na bio, akụkọ nkwado pụrụ iche yana ikike nrụpụta-compostability maka ihe owuwu enwetara ikike | Mgbochi okpomọkụ dị ala, mmetuta usoro, ihe egwu brittleness na akụrụngwa nchịkọta oke |
| PVC | Ewubere usoro kaadị dị ọnụ ala, mbipụta sara mbara na ihe ọmụma lamination | Dabere na fosil, chlorine nwere na imegharị ihe nwere oke n'ọtụtụ mmemme kaadị |
| PETG | Ezigbo lamination, ike siri ike, nghọta na imepụta kaadị amaara nke ọma | Ọbụghị ihe a na-akụghasị na mkpofu na-adabere na sistemu eji emegharịgharị mpaghara |
| Polycarbonate | Ogologo oge dị elu, nguzogide okpomọkụ na adabara maka ihe osise laser | Ọnụ ego dị elu yana nkwado dị iche iche / profaịlụ njedebe nke ndụ |
| Emegharịrị PVC / RPET G | Na-ebelata ọchịchọ na-amaghị nwoke-plastik ka ọ na-ejigide nhazi kaadị amaara nke ọma | Ọdịnaya emegharịrị, agba, ịdị n'otu na nrụgharịgharị chọrọ ihe akaebe |
PLA abụghị ngwa kachasị mma maka nzere ọ bụla. Ụlọ nkwari akụ dị mkpụmkpụ, onye ọbịa, ihe omume, onyinye na kaadị nkwado nwere ike ịbụ ndị na-agba ọsọ siri ike. NJ gọọmentị ogologo ndụ, kaadị ịkwụ ụgwọ, nzere okpomọkụ dị elu na kaadị chọrọ kabe laser nwere ike ịchọ PETG , polycarbonate ma ọ bụ ihe nrụpụta ọzọ kwadoro.
| ihe na-ekwu maka | nkọwa B2B ziri ezi. |
|---|---|
| Dabere na Bio-Dabere | Na-ezo aka na ọdịnaya carbon enwere ike imeghari ma kwesịrị ịkwado ya site na akwụkwọ ma ọ bụ nnwale |
| Ngwongwo ụlọ nrụpụta | Achọrọ asambodo maka ọnọdụ compposting nke ime obodo ma ọ bụ ụlọ ọrụ mmepụta ihe |
| Enwere ike ịgbakọ ụlọ | Achọrọ asambodo ụlọ-compost dị iche; asambodo ụlọ ọrụ ezughị oke |
| Enwere ike imebi ihe | Ezughi oke na-enweghị ebe ule, usoro na oge |
| Enwere ike imegharị ya | Ọ ga-ekwe omume na teknụzụ na iyi PLA raara onwe ya nye, mana anaghị anabata kaadị n'ụkpụrụ PET ma ọ bụ ịmegharị plastik agwakọtara. |
| Mkpesa kaadị zuru ezu | A ga-etinyerịrị mgbawa, antenna, ink, mkpuchi, nrapado na eriri magnetik na nyocha |
Asambodo mpempe akwụkwọ PLA enweghị ike ịkwado nkwupụta maka kaadị RFID , kaadị magnetik ma ọ bụ kaadị ebiri ebiri. Ngwa eletrọnịkị na ọla nwere ike ịchọ iwepụ, ọkachamara nrụgharịgharị ma ọ bụ ụzọ mkpofu dị iche.
Ọtụtụ ụlọ ọrụ mmepụta ihe na-emepụta compost anaghị anabata kaadị bioplastic siri ike. Okwu mkpofu kwesịrị igosipụta usoro nnakọta n'ezie n'ahịa a na-achọsi ike karia ihe eji eme ihe.
| Mpaghara | Ntụle |
|---|---|
| Akụkụ na ịdị arọ | Ogologo, obosara, radius nkuku, ọkpụrụkpụ na ndidi mgbe emechara |
| Warpage na flatness | Curl ozugbo na agadi na ọnọdụ okpomọkụ na iru mmiri a na-achịkwa |
| Adhesion Layer | Bee, ọnụ delamination, okpomọkụ ịka nká, iru mmiri ịka nká na mgbanwe |
| Ehulata na Torsion | Mgbanwegharị ugboro ugboro, mgbakasị ahụ, nhazi mgbape na nrụrụ na-adịgide adịgide |
| Okpomọkụ na nkwụsi ike akụkụ | Nchekwa na gburugburu na-ekpo ọkụ, mkpughe okpomọkụ nke ngwa nbipute na nkwụsị nke post-lamination |
| Mbipụta Ogologo | Rub, ọkọ, kemịkalụ kọntaktị, UV ikpughe na Overlay film adhesion |
| Nhazi nke kaadị | Kpọmkwem gaa na-kaadị, mbugharị, mbufe ọkụ, ikpuchi ule na itinye koodu dịka ọdabara. |
| RFID / Ọrụ magnetik | Gụọ/dee, ndakọrịta mkpọchi, iguzosi ike n'ezi ihe antenna na ntinye eriri mgbe emepụtara ya |
| ihe | njikwa ogo |
|---|---|
| Profaịlụ ọkpụrụkpụ | Nkezi nlele, mgbanwe nrụtụ aka ruo n'ókè na nnabata ọtụtụ-na-ọza |
| Akụkụ mpempe akwụkwọ | Ogologo, obosara, squareness, àgwà ihu na ịbelata ndidi |
| Flatness na Curl | Mpempe akwụkwọ ụta, nkwalite ihu na ntụzịaka nke curl mgbe edozichara |
| Agba na Opacity | L*, a*, b*, ọcha, opacity, gloss na visual akwadoro |
| Ogo elu | Ihe siri ike, ọkwa ọgwụgwọ, ncha, ntụpọ ojii, gels, mmetọ na mma-ihe nkiri |
| Ihe eji arụ ọrụ | Ịkwụsị, elongation, isi ike, mmetụta na nhịkọ dị ka usoro ekwekọrịtara siri dị |
| Ọnwụnwa Lamination | Njikọ, mbelata, haze, igbochi, nkwụsi ike bipụta na mwepụta efere |
| Nchọgharị | Ọkwa, ogbe, ụbọchị extrusion, nghazi, ụbọchị ọgwụgwọ, akụkọ nyocha na akwụkwọ ntụaka |
Mpempe akwụkwọ PLA nwere ike ịmasị okpomọkụ, iru mmiri na nchekwa ogologo oge. Nchekwa na-adịghị mma nwere ike ịgbanwe larịị, ọgwụgwọ elu, mbipụta na omume lamination. Ekwesịrị ịnakwere ihe nchekwa ihe achọrọ maka ọkwa ọkwa na usoro mbukota.
Chekwaa mpempe akwụkwọ emechiri emechi n'ụlọ nkwakọba ihe dị jụụ, kpọrọ nkụ na nke dị ọcha pụọ na ìhè anyanwụ na igwe ọkụ.
Debe mpempe akwụkwọ dị larịị na pallet akwadoro ma zere nrụgide oke oke.
Chebe elu site na uzuzu, mmanụ, akara mkpịsị aka, ncha na mmiri.
Ihe ọnọdụ na ụlọ obibi ma ọ bụ lamination tupu nhazi.
Jiri mkpuchi mmiri na-egbochi mmiri, nchebe akụkụ yana katọn mbupụ agbakwunyere.
Tinye ngwa nbipụta mbụ na nke mbụ wee lelee ọgwụgwọ elu mgbe ogologo nchekwa gachara.
Kaadị ụlọ ọrụ na-elekwasị anya: ọkpụrụkpụ mpempe akwụkwọ, elu, mbipụta na nhazi oyi akwa nwere ike nyochaa gburugburu ezigbo mmepụta kaadị chọrọ.
Omenala nlele na nha: Enwere ike ịtụle nhọrọ ọkọlọtọ 0.08-0.35mm na ụdị mpempe akwụkwọ ahaziri iche.
Nnwale mbipụta na lamination: Enwere ike ịlele nlele maka defet, UV inkjet, ihuenyo, mbipụta dijitalụ na lamination dị ala.
RFID nkwado oru ngo: Enwere ike inyocha ihe owuwu mpempe akwụkwọ yana oke inlay, ọnọdụ mgbawa, antenna na ndakọrịta nke onye na-agụ.
Mkpesa gburugburu ebe obibi kwesịrị ekwesị: Enwere ike ịdekọ akwụkwọ ihe onwunwe na kaadị arụchara na ahịa.
Ọdụdọ B2B ụlọ ọrụ na-apụta: Kwesịrị ekwesị maka ndị na-emepụta kaadị, ndị ntụgharị, ndị nbipute, ụlọ ọrụ RFID , ndị mbubata na ndị nkesa.
Ngwa kaadị emechara, ndụ ọrụ a na-atụ anya na ahịa ebe aga.
Ihe oyi akwa PLA achọrọ: isi a na-ebi ebi, etiti etiti, oyi akwa transperent ma ọ bụ Overlay film .
Ọkpụrụkpụ, ndidi, nha mpempe akwụkwọ, ọka/nghazi na ọnụọgụgụ.
Ọcha, nghọta, oji ma ọ bụ agba omenala yana ebumnuche opacity.
Akwụsịghị, UV inkjet, ihuenyo, Indigo ma ọ bụ usoro mbipụta ọzọ na sistemụ ink.
Igwe lamination, ihe dị ugbu a, profaịlụ okpomọkụ, nrụgide na ụdị efere.
Nha kaadị emechara, ọkpụrụkpụ na achọrọ ISO ma ọ bụ nkọwa ndị ahịa.
RFID mgbawa, antenna, inlay ọkpụrụkpụ, eriri magnetik ma ọ bụ mgbawa kọntaktị chọrọ.
Compostability, ọdịnaya dabere na bio, REACH , RoHS ma ọ bụ akwụkwọ ndị ọzọ chọrọ.
Nlereanya ọnụọgụ, amụma afọ, ọdụ ụgbọ mmiri na usoro nnyefe achọrọ.
Kwurịtara ọrụ PLA Ihe kaadị gị
Ọ bụchaghị. Ịmepụta kaadị chọrọ ịdị larịị a na-achịkwa, ịdị nro elu, agba, nrapado mbipụta, nnabata ọkpụrụkpụ na omume lamination. Rịọ ọkwa a nwalere maka imepụta kaadị.
Ọkpụrụkpụ ọkọlọtọ dị gụnyere 0.08, 0.15, 0.17, 0.20 na 0.35mm. Enwere ike nyochaa gauges ahaziri dịka extrusion mpempe akwụkwọ, nhazi oyi akwa na MOQ.
Ee. Mpempe akwụkwọ ọkọlọtọ bụ 300 × 480mm, enwere ike ịtụle usoro ahaziri iche dabere na nhazi akwụkwọ akụkọ, ntinye kaadị na akụrụngwa lamination.
Enwere ike ịlele mpempe akwụkwọ PLA maka kaadị ID-1, mana kaadị 85.60 × 53.98mm emechara na ọkpụrụkpụ 0.76mm ga-enwetarịrị mgbe ibipụta, lamination, jụrụ na ịkụ ọkpọ.
Enwere ike iji ọgwụgwọ elu na ink nyochaa mbipụta akwụghị ụgwọ. Ndị na-azụ ahịa kwesịrị ịnwale nnabata ink, ihicha, igbochi, njupụta agba na iguzogide okirikiri lamination.
Akara ọma ọgwụgwọ ma ọ bụ mkpuchi mkpuchi nwere ike dakọtara. A ga-anwale ike elu, ọgwụgwọ ink, mgbanwe, isi na njikọ Overlay film na ngwa nbipute a chọrọ.
Ngwa nwere ike iji ya mee ihe, mana ekwesighi ichekwa usoro nhazi PVC nkịtị. PLA na-achọkarị okirikiri okpomọkụ dị ala ma jiri nlezianya chịkwaa ya na nrụgide akwadoro, ibi na jụrụ oyi.
Ihe ndị na-akpatakarị gụnyere oke okpomoku, akwa akwa na-enweghị isi, nhazi akwụkwọ na-ekwekọghị ekwekọ, mkpuchi mbipụta akwụghị ọtọ, oyi na-adịghị mma na ịtụ kaadị ahụ tupu ọ dị mma.
Ee, n'okpuru ule. Inlay ọkpụrụkpụ, imewe antenna, nrapado, ebe mgbawa, nrụgide lamination na ndakọrịta agụ ga-etinyerịrị na nhazi kaadị.
Enwere ike ịtụle PLA maka kaadị igodo ụlọ nkwari akụ dị mkpụmkpụ mgbe agbajichara, sistemu mkpọchi, mbipụta, ikpughe iru mmiri na njikwa ugboro ugboro tupu mmepụta ya.
Arụmọrụ dabere na ọkwa na ihe owuwu. PLA nwere ike dabara maka kaadị ndụ mkpụmkpụ na nke ọkara ahọpụtara, mana ekwesighi iche na ọ dabara na PVC , PETG ma ọ bụ PC na nguzogide okpomọkụ, mmetụta ma ọ bụ mgbanwe ogologo oge.
Mpempe kaadị PLA ọkọlọtọ adabaghị na-akpaghị aka maka ihe osise laser echekwara. Usoro ihe ngosi laser, ọdịiche, nzaghachi okpomọkụ na ogologo oge kaadị chọrọ mmepe na nnwale raara onwe ya nye.
Nzọrọ ahụ dabere na gburugburu ebe a kwadoro yana ihe owuwu zuru oke. Mpempe akwụkwọ PLA dị larịị nwere ike ịbụ ihe nrụpụta ụlọ ọrụ, ebe inks, nrapado, ibe, antenna, ọnya ma ọ bụ mkpuchi nwere ike ịgbanwe ọkwa kaadị emechara.
Naanị mgbe kaadị emechara nke ọma nwere asambodo ụlọ-compost dị iche. Asambodo ụlọ ọrụ-compost anaghị akwado nkwupụta ụlọ-compost ozugbo.
PLA na PET bụ polymer dị iche iche na e kwesịghị ịgwakọta ya. Imegharị PLA chọrọ iyi nnakọta raara onwe ya nye, nke na-adịghị adị maka kaadị.
Enwere ike ịkọwa agba ọcha, doro anya, nwa, translucent na agba omenala. Masterbatch agba nwere ike imetụta mbipụta, lamination, arụ ọrụ igwe na oke asambodo.
Chekwaa akara, dị larịị ma kpọọ nkụ n'ụlọ nkwakọba ihe a na-achịkwa nke na-adịghị na ìhè anyanwụ na okpomọkụ. Chebe elu site na uzuzu, mmanụ, ncha na mmiri, na mpempe ọnọdụ tupu ibipụta ya.
Ee. Ekwesịrị ka ebipụta akwụkwọ nlere anya, kpochie, mee ka ọ dị mma, tụọ ọkpọ na ahaziri onwe ya site na iji usoro nrụpụta echere tupu akwadoro nkọwapụta ihe.
MOQ dabere na ọkpụrụkpụ, nha mpempe akwụkwọ, agba, ọgwụgwọ elu, mkpuchi, mbukota yana ma ọrụ ahụ na-eji usoro ọkwa ọkwa dị ugbu a.
Nye ngwa kaadị ahụ, ụdị oyi akwa, ọkpụrụkpụ, nha, agba, usoro obibi akwụkwọ, usoro lamination, RFID ma ọ bụ eriri ihe chọrọ, asambodo, ọnụọgụ na ebe aga.
Kpọtụrụ WALLIS Plastic maka kaadị isi kaadị PLA omenala, mpempe akwụkwọ a na-ebipụta na ihe mkpuchi kaadị maka onyinye, iguzosi ike n'ihe, igodo ụlọ oriri na ọṅụṅụ, mmemme, nkwado na mmemme kaadị RFID ahọpụtara. Ndị otu anyị na-akwado nhọrọ nlele, ibipụta na nnwale lamination, nyocha ihe nhazi kaadị, akwụkwọ gburugburu ebe obibi, nkọwapụta mma yana ọkọnọ B2B ụlọ ọrụ ozugbo.
