|
PETG dilannen don ni poliyesitɛri ye (n’an b’a fɔ tigitigi, kopoliyesitɛri thermoplastique), wa a bɛ se ka segin ka kɛ fɛn wɛrɛ ye kɛmɛsarada la, wa a bɛ se ka tiɲɛ
WLS-PETG Daɲɛw labɛncogo
WALLIS ye baara kɛ
| Ɲɛ: | |
|---|---|
| A bonya : 1 . | |
| Datugulan: | |
| Hakɛ: | |
Industri suguya caman na, yɔrɔ minnu bɛ mɛn ani minnu bɛ mɔgɔ ɲɛnajɛ, olu ɲinini bɛ ka bonya tuma bɛɛ. Fɛnɲɛnɛma dɔ min ye mɔgɔw diyabɔ, o ye PETG overlay ye. Nin barokun in bɛ PETG dacogo hakilina sɛgɛsɛgɛ, a nafaw, a kɛcogo, ani jateminɛw a sugandili n’a kɛcogo ɲuman na.PETG dacogo, min datugulen don ani min datugulen tɛ, o bɛ fura caman di iziniw ma minnu bɛ yɔrɔw wajibiya minnu bɛ mɔgɔ tanga ani minnu bɛ mɔgɔ ɲɛnajɛ. PETG filimu min datugulen don, o bɛ muɲuli sabati ani ka fɛn kɛrɛnkɛrɛnnenw di, k’a sɔrɔ PETG filimu min ma datugu, o ka fisa ni sabatili ni jɛya ye. A ka seko ni dɔnko lasegincogo fɛ ani sugandiliw bɔli fɛ minnu bɛ se ka tiɲɛ, PETG filimu b’a jira ko a ye sugandili ye min bɛ sigida laminiko ɲɛnabɔ baara suguya caman na.
| Minɛ | PETG ye |
| A ka bon kosɛbɛ | 0,04mm-0,15mm ye |
| Kundama | A4/A3/Ka kɛɲɛ ni mɔgɔw sago ye |
| Mɔdɛli |
Overlay min bɛ datugu |
| Overlay min tɛ datugu | |
| Laserable Overlay (dakun min bɛ se ka kɛ ni laser ye). | |
| Overlay min bɛ datugu ni barika ye | |
| Overlay min bɛ kɛ ni magnɛti ye | HICO/LOCO ye baara kɛ |
PETG dacogo bɛ tali kɛ lakanani filimu ye min dilannen don ni poliyetilɛni tereftalati gilikɔli ye min sɛmɛntiyalen don (PETG). A dabɔra walasa ka yɔrɔw muɲuli n’u cɛɲi bonya, a kɛtɔ ka fɛn jɛlen ni lakanani kɛ. PETG overlay bɛ kɛ ka caya iziniw kɔnɔ i n’a fɔ taamasiyɛnw, mobili, ɛntɛrinɛti, ani minɛnw.
PETG ye Polisitɛri fɛn ye min ɲɔgɔn tɛ, min tɛ sigida lakana ani min bɛ mɛn. A ka c’a la, PETG Overlay Film bɛ kɛ i n’a fɔ lakanani fini ye min bɛ kɛ ka PETG sɛbɛn finman kulɛri sɛbɛn. PETG Lamination Overlay Film baara ye ka The Card ka muɲuli sabati. Nin filimu min bɛ da ɲɔgɔn kan, o bɛ se ka dɔ bɔ antɛni jɛɲɔgɔnya kari ni contact plate farali farati la don o don baara la, Wa a bɛ se ka lakana ni a sirilen bɛ a kɔrɔta cogo la. Karti min datugulen don ni PETG Overlay Film ye, o bɛnnen don baara kuntaalajan ma walima ko minnu na, karti ka kan ka farikolo jogin hakɛ dɔ muɲu yɔrɔ minnu na, i n’a fɔ karti, ID karti, pake min bɛ kɛ ni jateden ye, Access Card, a ɲɔgɔnnaw.
Fɛn dilannenw ka baarakɛcogo:
A bɛ Fusible ni Funteni Dɔgɔyalen ye;
Printed Printing Surface min furakɛra;
Puncture Resistance ani Tear Resistance
A ka bonya tigitigi ni a ma bɔ a la
Bending Resistance, High Impact, Puncture ani Tear Resistance
Lamination Performance ɲumanba
PETG dacogo bɛ kɛ i n’a fɔ kala, ka duguma yɔrɔ tanga sɔgɔsɔgɔninjɛ, sɔgɔsɔgɔninjɛ ani UV fiɲɛ ma. A bɛ dɔ fara kosɛbɛ dugukolo sanfɛla ɲɛnamaya kan, k’a to a bɛ to cogo jɛlen na waati jan kɔnɔ.
A ka kɛnɛya cogoya fɛ, PETG dacogo bɛ a datugulen yɔrɔ yecogo dafalen mara. A bɛ finimugu ɲɛnama di, ka dunuya ni ɲɛnamaya fara kulɛriw, ja walima sɛbɛnniw kan. O kɛcogo b’a kɛ sugandili ɲuman ye baarakɛminɛnw kama minnu bɛ yecogo ɲumanw wajibiya.
PETG dacogo bɛ se ka baara kɛ ni a ye, wa a bɛ se ka kɛ nɔgɔya la yɔrɔ suguya caman kan. A bɛ na ni kɔkanna nɔrɔlen ye min b’a to a bɛ se ka sigi ni gɛlɛya tɛ a la. Ka fara o kan, a bɛ ladonni dɔɔnin de wajibiya, o bɛ waati ni cɛsiri bɔ waati jan kɔnɔ.
PETG overlay bɛ baara caman sɔrɔ taamasiyɛnw dilanni na. A bɛ lakana di ani ka kɛnɛma ni so kɔnɔ taamasiyɛnw yecogo ɲɛ, ka ɲɛnamaya jan ni ja ɲɛnamaw sabati. A bɛ se ka kɛ fana feerelikɛyɔrɔw jirayɔrɔw la, jagokɛyɔrɔw jirayɔrɔw la, ani feerekɛyɔrɔw la.
Mobiliko la, PETG overlay bɛ kɛ kɔnɔna ni kɛnɛma baarakɛcogo la. A bɛ lakanani-yɔrɔ di dashboardw kan, minɛnw kuluw kan, panneau de contrôle (panneau de contrôle) ani kɛnɛma badgew kan. A ka se ka waati gɛlɛnw muɲu ani ka a yɛrɛ tanga fani ma, o b’a to a ye sugandili ɲuman ye mobili yɔrɔw la.
PETG overlay bɛ baara kɛ kosɛbɛ ɛntɛrinɛti ni minɛnw dilanni na. A bɛ se ka sɔrɔ ɛkran minnu bɛ se ka maga fɛnw na, panneau de contrôle, ani panneau ɲɛfɛla minnu bɛ kɛ minɛnw na i n’a fɔ frigow, kolanfɛnw ani mikrow. O dacogo bɛ o yɔrɔw tanga don o don sɛgɛn ni sɛgɛn ma, ka sɔrɔ fana ka dɔ fara u ɲɛda cogoya kan.
Ni aw bɛ PETG dacogo sugandi, aw bɛ jateminɛ kɛ a janya wajibiyalen na ka da lakana hakɛ kan min ka kan. Datugulan minnu ka bon, olu bɛ muɲuli caman di nka u bɛ se ka nɔ bila kɛnɛya la. Aw bɛ balansi sugandi a bonya ni a jɛlen cɛ walasa ka sɔrɔ ɲininen sɔrɔ.
Ni a kɛcogo bɛ tali kɛ tile yeelen na walima UV sɔrɔyɔrɔ wɛrɛw la, aw bɛ PETG datugucogo sugandi ni UV kunbɛncogo ye. O kɛcogo b’a to da tugulen bɛ a ka kɛnɛya sabati ani ka a bali ka kɛ jɛman ye walima ka tiɲɛ waati tɛmɛnen kɔfɛ.
Aw bɛ PETG datugulan nɔrɔcogo jateminɛ walasa ka a dɔn ni a ni yɔrɔ laɲininen sirilen don ka ɲɛ. Nɔrɔli fanga, a sigicogo kura, ani a ni fɛn suguya caman bɛ bɛn ɲɔgɔn ma, o ka kan ka jateminɛ walasa ka a sigi ka ɲɛ.
Sani aw ka PETG datugulan kɛ, aw bɛ a yɔrɔ labɛn ni a saniyalen ye ka ɲɛ. Aw bɛ buguri, nɔgɔ walima tulu minnu bɛ se ka nɔ bila nɔrɔli la, aw bɛ olu bɔ. Aw bɛ fini saniyalan nɔgɔman dɔ kɛ ani fini min tɛ wuluwulu kɛ walasa ka a to a yɔrɔ ka jɛya.
Aw bɛ PETG dacogo suman ka a tigɛ walasa a ka bɛn a sanfɛla hakɛw ma. Aw bɛ dakun fitinin dɔ to a dawolow lamini na walasa u ka se ka ɲɔgɔn bɛn ka ɲɛ u kɛtuma na. Aw bɛ baara kɛ ni nɛgɛbere walima tigɛminɛn nɔgɔlen ye walasa ka tigɛ saniyalenw ni tigɛcogo tigitigiw sɔrɔ.
Aw bɛ PETG datugulan kɔkanna lakananen bɔ ka a bila a sanfɛ ka ɲɛ. Aw bɛ a daminɛ da kelen na ka a digi dɔɔni dɔɔni ka a sɔrɔ aw bɛ bugun walima kurukuruw bɛɛ nɔgɔya. Aw bɛ a lajɛ ni a bɛ bɛn ɲɔgɔn ma ka ɲɛ ani ka aw yɛrɛ tanga fiɲɛbɔlanw ma minnu bɛ datugulan ni a sanfɛla cɛ.
PETG filimu bɛ se ka segin ka kɛ fɛn wɛrɛ ye kosɛbɛ, o b’a to a bɛ kɛ sugandili ye min tɛ fɛnɲɛnamaw tiɲɛ. A bɛ se ka lajɛ, ka tila, ka baara kɛ walasa ka PETG fɛnw dilan minnu bɛ se ka kɛ fɛn wɛrɛw ye. PETG filimu seginni bɛ dɛmɛ ka nafolo mara, ka binkannikɛyɔrɔw nɔgɔw dɔgɔya, ani ka plastiki nɔgɔw nɔ bila sigida la.
San laban ninnu na, ɲɛtaa kɛra PETG filimu dilanni na min bɛ se ka tiɲɛ. Nin fɛn kura ninnu bɛ jogo ni baarakɛcogo kelen di i n’a fɔ PETG filimu laadalata, k’a sɔrɔ u bɛ fɛnɲɛnamaw tiɲɛni sabati cogo kɛrɛnkɛrɛnnenw na. PETG filimu min bɛ se ka tiɲɛ, o bɛ fura ɲuman jira iziniw ma minnu bɛ fɛɛrɛ wɛrɛw ɲini minnu bɛ sabati.
An ka Producing layini
Film PE anti-statique + kraft min tɛ ji bɔ + palɛti/kɛsu + labelling custom. Baarakɛlaw ka jagokɛminɛnw bɛ taa ni u ye jamana wɛrɛw la, o bɛ a to u bɛ se ka lase 100% diɲɛ kɔnɔ.
San 15+ dannaya bɛ dilanbaga la • Izini 7 • tɔni 8000/kalo • Kulɛriw & janya ladamulen • Samples fu • Jaabi 24h • Furakɛcogo kelen
Wallis tun bɛ danfara don kliyanw ni ɲɔgɔn cɛ
Wallis ka ekipu professionnel
Wallis ka izini
PETG overlay bɛ baarakɛcogo sɔrɔ izini suguya caman na, i n’a fɔ mobili, ɛntɛrinɛti, jɔli, ani taamasiyɛnw, ani fɛn wɛrɛw. A bɛ nafaw di mɔgɔ tangacogo ni ɲɛnajɛko ma.
Ɔwɔ, PETG filimu min datugulen don, o bɛ furakisɛw kɛlɛcogo ɲuman di, o b’a to a bɛnnen don baara kɛtaw ma, yɔrɔ minnu na, furakisɛ gɛlɛnw bɛ se ka kɛ yɔrɔ minnu na.
Ɔwɔ, PETG dacogo bɛnnen don kɛnɛma baara ma. A bɛ UV kɛlɛcogo ɲuman di ani a bɛ duguma yɔrɔw tanga waati cogoyaw ma, o bɛ a to u ka mɛn ani u ka mɛn.
Ɔwɔ, PETG dacogo bɛ se ka kɛ yɔrɔw kan minnu kurulen don. A bɛ se ka wuli ka bɔ a nɔ na, wa a bɛ se ka bɛn cogoya ni a cogoya wɛrɛw ma, o b’a to a bɛnnen don baara suguya caman ma.
PETG dacogo ɲɛnamaya bɛ se ka ɲɔgɔn ta ka kɛɲɛ ni a kɛcogo ye ani sigida cogoyaw ye. Nka, ni a bilala ka ɲɛ ani ni a ladonna ka ɲɛ, a bɛ se ka mɛn san damadɔ kɔnɔ, ka lakana ni cɛɲi di mɔgɔ ma min bɛ se ka da a kan.
Ɔwɔ, PETG dacogo bɛ se ka kɛ ka kɛɲɛ ni ja sɛbɛnnenw ye. A bɛ sira di ka dilancogo ɲɛnamaw ni kunnafoni caman di, logow walima kunnafoniw kɛ ka sɔrɔ ka a jukɔrɔla yɔrɔ dafalen mara.
