|
WLS-INKJET ƝƐFƆLI
WALLIS ye baara kɛ
| Kulɛri: | |
|---|---|
| Bonya: | |
| A bonya : | |
| Yɔrɔ: | |
| Hakɛ: . | |
Wallis bɛ PETG coated overlay ani PET inlay fɛnw di karti dilannikɛlaw ma minnu bɛ ID kartiw dilan minnu bɛ mɛn, don kartiw, RFID kartiw, NFC kartiw, wari sara kartiw, bolifɛnw kartiw, tɔndenw ka kartiw, lotɛli kilisi kartiw, ani karti hakilitigi minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye.
PETG dacogo jɛlen bɛ karti lamininen kɛnɛma lakana. Kɔnɔna PET-based layɛrɛ bɛ se ka kɛ PET core sheet gansan ye min tɛ ni ɛntɛrinɛti ye, antenne tabaga, chip-and-antenna pre-inlay, walima RFID inlay prelaminated dafalen. O fɛnw ɲɛfɔcogo tɛ kelen ye, wa u ka kan ka dɔn u danma sani u ka san.
A janya, a sɛbɛnfura hakɛ, a sanfɛla fini, a dacogo hakɛ, a RFID labɛncogo ani a karti labɛncogo bɛ se ka kɛ ka kɛɲɛ ni a kɛcogo ye. Quotation ka kan ka PETG overlay ni PET core/inlay jira i n’a fɔ layini fɛnw danfaralenw, ni fɛn kelen-kelen bɛɛ ɲɛfɔcogo, hakɛw ani sɔnni sariyaw ye.
B2B ladamuni: PETG dakun janya ni a laban, PET inlay gansan walima RFID, LF/HF/UHF frequency, puce model, antenna material, sheet layout, karti hakɛ sɛbɛn kelen kɔnɔ, sɛbɛnni taamasiyɛn sɛbɛnnenw, pakew, ani OEM labeling.
| Ka kɛ | PETG datugulen dacogo ani PET inlay ka karti lamini |
| Fɛn min bɛ kɛ ka fɛnw da | PETG jɛlen |
| Inlay Materiel (Materiel inlay) ye | PET structurel core walima PET basigilen RFID prelaminated inlay |
| PETG Overlay ka bonya | 0,04mm–0,15mm ye; sugandili minnu bɛ kɛ tuma caman na, olu ye milimɛtɛrɛ 0,06, milimɛtɛrɛ 0,08 ani milimɛtɛrɛ 0,10 ye; customized thickness bɛ sɔrɔ |
| PET Inlay ka bonya | A bɛ kɛ ka kɛɲɛ ni karti jɔcogo dafalen ye; 0,25mm ani poroze kɛrɛnkɛrɛnnen sugandili wɛrɛw bɛ se ka jateminɛ |
| Sheet Size (sɛbɛnni hakɛ). | A4, A3, 295 × 460mm, 295 × 485mm, ani a bonya bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye |
| Karti Labɛncogo | 2 × 5, 3 × 7, 3 × 8, 4 × 8, 5 × 5, 4 × 10, walima sɛbɛnfura min bɛ kɛ ka kɛɲɛ ni a yɛrɛ sago ye |
| Overlay Sugandiliw | Datugulan datugulen, datugulan barikama min datugulen don, datugulan min datugulen tɛ, laser-responsive grade kɛrɛnkɛrɛnnen (ni a bɛ se ka kɛ yɔrɔ min na), datugulan matte, ani datugulan min bɛ kɛ ni magnetic stripe ye |
| Surface Finish (Sufɛla Fini). | A bɛ kɛ ka ɲɛ, a bɛ manamana, a bɛ kɛ fɛn ye min tɛ fɛn ye, a bɛ kɛ ni nɛnɛ ye, a bɛ se ka sɔgɔsɔgɔ, walima a bɛ kɛ ka kɛɲɛ ni a yɛrɛ sago ye |
| PET Inlay suguya | PET core sheet gansan (ɛlektroniki tɛ), PET tabaga min bɛ antɛni dɔrɔn na, RFID pre-inlay, RFID prelaminated inlay, walima poroze kɛrɛnkɛrɛnnenw ka dual-frequency structure |
| RFID Frequency Sugandiliw | 125kHz LF, 13.56MHz HF/NFC, UHF, walima dual-frequency configuration, ka kɛɲɛ ni poroze ka wajibiw ye |
| Puce Sugandili | LF, HF, NFC ani UHF puwɛnti minnu sugandira walima minnu bɛ poroze fɛ, ka kɛɲɛ ni u sɔrɔli ye ani kalanbagaw ka bɛnkan ye |
| Antɛni Sugandili | Antɛni ni nɛgɛbere ye, antɛni min dilannen don ni aluminiyɔmu ye, walima antɛni dilancogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye |
| Ɲɛ | Datugulan jɛlen; PET inlay structure finman, jɛlen, walima min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye |
| Aplikasiw (applications) minnu bɛ kɛ | ID kartiw, RFID kartiw, NFC kartiw, don kartiw, wari sara kartiw, bolifɛn kartiw, baarakɛlaw ka kartiw, tɔndenw ka kartiw, lotɛli kilisi kartiw, ani smart labels |
| OEM Baarakɛlaw ka baarakɛyɔrɔw | Fɛn min bɛ kɛ, a bonya, a bonya, a labɛncogo, a puce, a frequency, antenne, a dacogo, a sanfɛla, a sɛbɛnni taamasiyɛnw, a foroko kɔnɔ, ani a tɔgɔ sɛbɛnni min bɛ kɛ mɔgɔ kelen-kelen bɛɛ ye |
Hakɛ labanw, u bonya, u puwɛnti, antɛni, u ka caya, u ka kalan kɛcogo, u dacogo, ani u laminicogo paramɛtiriw ka kan ka dafa ni fɛɛrɛko ɲɛfɔli ni u dilanni misali ye min dabɔra.
Walasa ka sɔrɔyɔrɔ tigitigi sɔrɔ, aw bɛ kɛnɛma filimu lakananen ni kɔnɔna jɔcogo PET sɛbɛn ni RFID inlay baarakɛta danfara bɔ . 'inlay' daɲɛ bɛ fɔ cogo wɛrɛ la feerekɛlaw cɛ; ja ni misali dɔ bɛ daɲɛ fila-fila bɔ.
| Fɛn min bɛ dilan Baara | kunba | RFID Elektroniki bɛ sɔrɔ a kɔnɔ wa? | Sanniko kunnafoni kunbabaw |
|---|---|---|---|
| PETG dacogo dafalen | Karti sanfɛla jɛlen ani bonding interface | Ayi | A bonya, a dacogo fan, a ɲɛda fini, a jɛlen don, a sɛbɛnfura hakɛ, a bɛ bɛn ni sɛbɛnnikɛlan ye |
| PET core sɛbɛn gansan | Kɔnɔna karti janya ani a jɔcogo | Ayi | Kulɛri, jateminɛkɛlan, density, thermal shrinkage, layɛrɛ sirili, tigɛcogo |
| Antɛni dɔrɔn de bɛ PET tabaga | A bɛ antɛni dɛmɛ sani puce laban ka siri | Antɛni dɔrɔn de; IC sirilen tɛ | Antɛni jateminɛ, fɛn, rezisti, layout ani bonding pads |
| PET-based RFID ka kɔn ka don a kɔnɔ | Puce ni antenne lajɛ walasa ka karti caman tigɛli kɛ kɔfɛ | Awɔ | IC yɔrɔ nimɔrɔ, protocole, antenne tuning, bond integrité, sheet pitch ani baarakɛcogo sɛgɛsɛgɛliw |
| PET-based RFID prelam | Encapsulé fonctionnel inlay labɛnnen don ka karti-stack lamination | Awɔ | Prelam janya karti, puce sigiyɔrɔ, kuran sɔrɔta, RF sɛgɛsɛgɛli ani lamination bɛnkan |
PETG dacogo jɛlen yɛrɛ tɛ RFID baarakɛcogo di. PET-based core tɛ kɛ RFID inlay ye fo ni puce ni antenne wajibiyalenw donna a kɔnɔ ani ni u sɛgɛsɛgɛra.
PETG coated overlay ani PET inlay ye layini fila ye minnu tɛ kelen ye, minnu bɛ kɛ ɲɔgɔn fɛ plastiki lamininen ni smart card jɔli la.
A ka c’a la, PETG datugulen bɛ bila karti ɲɛfɛla ni kɔfɛla la. A bɛ seko ni dɔnko sɛbɛnnenw lakana ani ka dɛmɛ don ka kɛnɛma layiniw siri karti kɔnɔna jɔcogo la funteni lamini waati la.
PET inlay bɛ bila karti kɔnɔ. A bɛ se ka kɛ jɔli sɛbɛn gansan ye, antɛni dɔrɔn layɛrɛ, walima RFID prelaminated core dafalen min kɔnɔ puce ni antenne bɛ sɔrɔ. Ɲɛfɔli ɲuman ka kan ka dafa ni i bɛ quotation ɲini.
PETG ye poliyesitɛri fɛn ye min sɛmɛntiyalen don ni glycol ye, a bɛ kɛ yɔrɔ min na, ɲɛnayeli jɛlen, a gɛlɛya, a dilanni, ani a sirili dafalen ka kan ka kɛ yɔrɔ min na. Karti dilanni na, PETG filimu jɛlen bɛ se ka kɛ yɔrɔ ye min bɛ mɔgɔ tanga ani ka a masiri.
O fini bɛ kɛ karti-contact fan fɛ min bɛ datugulan kan walasa ka nɔrɔli ɲɛ ka ɲɛ sɛbɛnfura sɛbɛnnenw na minnu bɛ bɛn ɲɔgɔn ma, PET layɛrɛw, PETG layɛrɛw, PVC layɛrɛw, walima karti jɔcogo jɛlenw. Datugulan hakɛ ka kan ka bɛn ni sɛbɛnnikɛlan tintin ye, karti kɔnɔna, funteni, tansiyɔn ani lamini cycle.
Overlay jogo bɛ nɔ bila karti jɛlen na, a yeelen na, a flakɛli la, ja sɛbɛnnenw yecogo la, a ɲɛkisɛw fanga la, a sanfɛla kɛlɛli la, a hakɛ sabatili la, ani a karti dafalen cogoya la. Sannikɛlaw ka kan ka finimugu kɔrɔbɔ ni enki ni laminatɛri yɛrɛ ye sanni u k’u jigi da fɛn tɔgɔlafɛnw dɔrɔn kan.
PETG Coated Overlay min bɛ kɛnɛya
PETG Overlay Sheet ka ɲɛsin Lamination ma
PETG dacogo jɛlen bɛ a to foto sɛbɛnnenw, logow, sɛbɛnniw, barɔdiw, QR kodew, kunnafonidilanw, ani lakana ja minnu bɛ ye, olu ka to ka ye ka jɛya lamini kɔfɛ.
Yɔrɔ min bɛnnen don min datugulen don walima min datugulen don kosɛbɛ, o bɛ jɛɲɔgɔnya ɲɛ kariti datugulan ni karti sɛbɛnnenw cɛ, o bɛ dɛmɛ ka dɔ bɔ u bɔli la, ka dawolo kɔrɔta, ka bugunw, ani ka fɛnw ni ɲɔgɔn cɛ faranfasi.
O datugulan bɛ kunnafoni sɛbɛnnenw lakana ka bɔ sɔgɔsɔgɔninjɛ, ji, bolokɔniw, nɔgɔ, sɔgɔsɔgɔli, ani segin-ka-bɔnyew la, karti baara kɛtuma na cogo la min bɛ kɛ tuma bɛɛ.
Sugandili minnu bɛ kɛnɛya, minnu bɛ nɔgɔya, minnu tɛ fɛn ye, minnu bɛ kɛ ni nɛnɛ ye, minnu tɛ yeelen bɔ, minnu tɛ sɔgɔsɔgɔ, ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka jateminɛ ka kɛɲɛ ni karti dilanni n’a kɛcogo ye min bɛ kɛ ka kɛɲɛ ni mɔgɔ yɛrɛ ta ye.
Sannikɛlaw bɛ se ka finimugu dafalen sugandi, finimugu barikama, datugulan min datugulen tɛ, fɛn min bɛ se ka laser, walima fɛn min bɛ kɛ ni magɛnni ye ka kɛɲɛ ni karti jɔcogo n’a baarakɛcogo wajibiyalenw ye.
PET core sheet gansan ye kɔnɔna ye, min tɛ ɛntɛrinɛti ye, min tɛ ni antɛni walima RFID puce ye. A bɛ dɛmɛ don karti janya wajibiyalen na ani a jɔcogo baarakɛcogo la. Hali ni feerekɛla dɔw bɛ 'inlay' daɲɛ fɔ nin layini in na, i ka fɛn ja dɔ ɲini walasa a kana ɲagami ni ɛntɛrinɛti inlay ye.
Antɛni dɔrɔn inlay kɔnɔ, nɛgɛ walima aliminiyɔmu antɛni bɛ sɔrɔ nka a tɛ puce laban ɲɔgɔndan na. A bɛ se ka sugandi dilanbagaw fɛ minnu bɛ puce bonding walima module assembly dafa u yɛrɛ ka baarakɛyɔrɔ la.
RFID pre-inlay bɛ puce ni antenne sugandilen dɔ fara ɲɔgɔn kan PET carrier kan. A dabɔra ka fɛn caman tigɛli, ka fɛnw datugu, walima ka lamini ka kɛ karti hakilitigi dafalen ye.
RFID inlay prelaminated kɔnɔ, puce ni antenne bɛ sɔrɔ min datugulen don karti-core layers labɛnnenw kɔnɔ. Karti dilannikɛlaw bɛ se k’a fara ɲɔgɔn kan ni core sheets sɛbɛnnenw ye ani PETG overlays sanni ka lamination laban kɛ ani ka punching kɛ.
PET RFID Inlay ka baarakɛcogo
Smart Card Inlay ka ɲɛsin Lamination ma
125kHz LF inlay bɛ kɛ ka surunya dɔnni na min bɛ bɛn ɲɔgɔn ma, dondaw kɔlɔsili jɔnjɔn, nali ani kalanbaga kɔrɔw. Baganw dɔnni porozɛw kama, 134,2kHz sigicogo ni kalanbaga sariya min bɛ sirataama, olu ka kan ka lajɛ u danma; 125kHz sɔrɔli inlay man kan ka jate ko a bɛ bɛn.
Puce sugandili ka kan ka bɛn ni kiliyan ka kalanbaga ye, kunnafoni cogoya, hakilijagabɔ, kalan dɔrɔn walima sɛbɛnni seginni wajibiyalen, lakana wajibiyalen, ani sistɛmu protocol.
13,56MHz HF walima NFC inlay bɛ se ka kɛ ka dondaw kɔlɔsili, foroba bolifɛnw, gafemarayɔrɔ kartiw, kalanso kartiw, tɔndenw ka porogaramuw, dantigɛli, dantigɛli, telefɔni selilɛriw ka jɛɲɔgɔnya, ani wari sarali porozɛw la minnu tɛ sɔrɔ ɲɔgɔn fɛ.
Puce wajibiyalen ka kan ka sugandi ka kɛɲɛ ni kalanbagaw ka yɔrɔ ye min bɛ baara kɛ, hakilijagabɔ, kodɔn, dantigɛli, protocol, kalan yɔrɔjan, baarakɛyɔrɔ, ani seereyaw wajibiyalenw.
UHF inlays bɛ se ka jateminɛ walasa ka fɛn caman dɔn yɔrɔjan, nafolo marali, fɛnw ladonni, bolifɛnw dɔnni, ko kɛlenw ɲɛnabɔli, fɛnw jatebɔ, ani baarakɛcogo minnu bɛ fɛn caman kalanni teliya wajibiya.
UHF frequency band, antenne design, puce, regulatory region, reader power, installation environment, lamini fɛnw, ani kalan janya wajibiyalen ka kan ka dafa sani a ka dilan.
Dual-frequency inlay bɛ RFID fɛɛrɛ fila fara ɲɔgɔn kan karti jɔli kelen kɔnɔ. A bɛ se ka dɛmɛ don sistɛmuw ma minnu mago bɛ bɛnkan na ni kalanbagaw ka fɛnsɔrɔsiraw fila ye, nka puwɛntiw ni ɲɔgɔn cɛ, antɛni jɛɲɔgɔnya, sɛbɛnw labɛncogo, karti janya, ani karti dafalen baarakɛcogo bɛ porozɛ kɛrɛnkɛrɛnnen injiniyɛri de wajibiya.
Karti hakilitigi lamininen cogoya la, PETG datugulan bɛ karti sanfɛla lakana ka sɔrɔ PET dacogo bɛ kɔnɔna jɔcogo walima baarakɛcogo di min tɛ ɲɔgɔn sɔrɔ. Jagokɛcogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o bɛ se ka kɛ ni nin layini ninnu ye:
Front transparent PETG coté overlay.
PET, PETG, PVC, walima karti-kɔrɔ sɛbɛn min sɛbɛnnen bɛ ɲɛfɛ.
PET structurel inlay gansan walima RFID PET inlay min kɔnɔ puce ni antenne bɛ sɔrɔ.
Karti-kɔrɔ sɛbɛn min sɛbɛnnen bɛ kɔfɛ.
Kɔnɔna transparent PETG coated overlay.
Lamini waati, funteni ni degun bɛ layiniw siri ka kɛ karti farikolo kelen ye. Funteni, tansiyɔn, funteni waati, nɛnɛ waati, u dalajɛ sira ani u bɔli plati minnu dagalen don, olu bɛ bɔ fɛnw ni minɛn tigitigiw de la.
Overlay gauge tɛ se ka sugandi a yɛrɛma ka bɔ PET core, inlay, printed layers ani target finished-card thickness la. ID-1 karti danma na, a janya dafalen tɔgɔlama ye milimɛtɛrɛ 0,76 ye , o ye bolodacogo nafama ye, nka karti dafalen ka kan ka suman lamini ni kondisiyɔn kɔfɛ.
| Jatebɔsɛbɛn min bɛ wele ko Layer | Nominal Gauge | Jatebɔsɛbɛn |
|---|---|---|
| PETG dacogo ɲɛfɛ | 0,08mm ye | Lakanali yɔrɔ laban; aw bɛ a dacogo ni a jateminɛnan yɛrɛ sɛgɛsɛgɛ |
| Front imprimé core (kɔnɔna sɛbɛnnen). | 0,15mm ye | PET/PETG/PVC-compatible fɛn sɛbɛnnen sugandilenw bɛ o kɔnɔ |
| Santiri PET-based core walima prelam | 0,30mm ye | Misali dɔrɔn de bɛ yen; puce zone, antenne ani core jɔli bɛ se ka mago don gauge wɛrɛ la |
| Kɔfɛ sɛbɛnnikɛlan core | 0,15mm ye | Aw bɛ ɲɛfɛla lamini bɛn walasa ka karti wulicogo ni a dɔgɔyali kɔlɔsi |
| PETG kɔfɛla dacogo | 0,08mm ye | Aw ye kalasi ni orientation bɛnkan dafa |
| Misali la, fɛn bɛɛ lajɛlen ka sɔrɔ ka baara kɛ | 0,76mm ye | 0,08 + 0,15 + 0,30 + 0,15 + 0,08 ye ; a tɛ garanti dafalen ye min bɛ se ka kɛ |
Funteni, degun, fɛnw bolicogo, enki sɛbɛnnen, antɛni ani puce cavities bɛ se ka karti janya lakika Changer. Aw bɛ sɔn a janya cɛmancɛ ni sigida puce-zone janya fila bɛɛ ma ni karti dafalen misali ye min bɛ se ka kɛ.
Overlay ni inlay sɔrɔyɔrɔ i n’a fɔ sistɛmu min bɛ bɛn ɲɔgɔn ma, o bɛ karti dilannikɛlaw dɛmɛ u ka fɛnw bɛn ɲɔgɔn ma, u layɛrɛ janya, u ka sɛbɛnw labɛncogo, u tɔgɔ sɛbɛnni, ani u ka sanni kɛ ka bɔ feerekɛla kelen fɛ.
Lamini kɛlen bɛ puce ni antɛni datugu karti farikolo kɔnɔ, o bɛ dɛmɛ don ka ɛntɛrinɛti yɔrɔw lakana ka bɔ baara kɛcogo kɔrɔ la, ka nɔgɔ, ka sɔgɔsɔgɔ, ani ka ɲɔgɔn sɔrɔ yɔrɔ tilennen na.
Datugulan jɛlen bɛ kunnafoni sɛbɛnnenw yecogo mara, k’a sɔrɔ kɔnɔna fɛn bɛ karti janya, a jɔcogo ani a baarakɛcogo wajibiyalenw di a ma.
Karti dilannikɛlaw bɛ se ka fɛnw dabɔcogo janya, fɛnw doncogo janya, puce suguya, antɛni hakɛw, sɛbɛnw labɛncogo, u ɲɛda fini, taamasiyɛn sɛbɛnnenw, magɛnni sɛrɛkili, siginiden panneau, walima baarakɛminɛn wɛrɛw bɛ se ka kɛ ka kɛɲɛ ni u yɛrɛ sago ye.
Inlay sheets minnu labɛnna ka kɔn, olu b’a to karti caman bɛ se ka lamini ani ka punch kɛ u dilanni cycle kelen kɔnɔ, o bɛ kɛ sababu ye ka ɲɔgɔndɛmɛ ɲɛ ani ka dɔ bɔ a mago la ka puwɛntiw ni antɛniw bila kelen-kelen karti labanw lajɛ waati la.
PET RFID inlays bɛ se ka labɛn baarakɛlaw ka don kartiw kama, sow seereyaw, kalanso kartiw, taamakɛlaw ka kartiw, bolifɛnw jɔyɔrɔ kartiw, lotɛli kartiw, ani yɔrɔ dantigɛlenw dɔnni.
PETG overlay bɛ fotow, tɔgɔw, nimɔrɔw, barɔdiw ani kunnafoni sɛbɛnnenw lakana, ka sɔrɔ PET inlay bɛ karti baarakɛcogo wajibiyalen di farikolo la walima min tɛ se ka ɲɔgɔn sɔrɔ.
HF inlays minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka jateminɛ kɛ bolifɛnw tacogo la, tikitiw sɔrɔli la, bolifɛnw tacogo la, bolifɛnw jɔyɔrɔ la, kalanso kɔnɔ bolifɛnw tacogo la, ani taama porogaramuw la ni kalanbagaw ni kɔkanna sigidaw ye minnu bɛ bɛn ɲɔgɔn ma.
Sarako-karti porozɛw bɛ puce, antɛni, karti-farikolo jɔcogo ɲuman, mɔgɔ yɛrɛ tacogo, seereyaw, kalanbagaw ka bɛnkan, ani sarali-rɛzo sɔnni bɛnnen de wajibiya. Fɛnw dicogo dɔrɔn tɛ karti dafalen sariya labatoli sigi sen kan.
RFID walima NFC baarakɛcogo bɛ se ka don feerekɛlaw ka kantigiya kartiw kɔnɔ, farikoloɲɛnajɛ kartiw, kulu ka kartiw, ko kɛlenw kartiw, gafemarayɔrɔ kartiw, jatigila kartiw, ani kiliyanw ka tɔndenw ka porogaramuw kɔnɔ.
NFC puwɛnti minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka dɛmɛ don mobili ni minɛnw ka jɛɲɔgɔnya la ka ɲɛsin viziti karti nimɔrɔma ma, ka fɛn dilannenw tiɲɛni, ka don ɛntɛrinɛti yɔrɔ la, ka ko kɛlenw sen don a la, ka tɔndenw sɛgɛsɛgɛ, walima ka baara wɛrɛw kɛ minnu bolodara.
PET inlays bɛ se ka don kartiw kɔnɔ minnu fana bɛ ni contact chips, magnetic stripes, barcodes, QR codes, signature panels, holographies elements, walima RFID fɛɛrɛ caman ye.
Karti dafalen hakɛw, laɲiniw janya, a sanfɛla laban, karti ɲɛnamaya makɔnɔnen, baarakɛcogo sigida, sɛbɛnni kɛcogo, mɔgɔ yɛrɛ tacogo, ani baarakɛcogo wajibiyalenw dafa.
A fɔ ni poroze in bɛ PET core structurel gansan de wajibiya, inlay min bɛ kɛ ni antɛni dɔrɔn ye, inlay min bɛ kɛ ni puce ni antenne ye ka kɔn o ɲɛ, walima ni inlay prelaminated RFID dafalen ye.
Kalanbaga modɛli, baarakɛcogo frequency, protocol, hakilijagabɔ wajibiyalen, lakana wajibiyalen, data format, kalan yɔrɔ wajibiyalen, ani karti walima puce reference sisan di.
Aw bɛ puce sugandi ka kɛɲɛ ni sistɛmu bɛnkan ye ani ka antɛni dilancogo sugandi min bɛ bɛn karti labɛncogo ma, puce capacitance, kalan yɔrɔjan wajibiyalen, lamination cogoyaw, ani lamini fɛnw.
Karti hakɛ min bɛ sɛbɛnfura kelen kɔnɔ, sɛbɛn hakɛw, tɔgɔsɛbɛnni taamasiyɛnw, antɛni ɲɛsincogo, puce jɔyɔrɔ, punching margin, sɛbɛnfura yɔrɔ, ani muɲuli wajibiyalenw dafa.
Aw bɛ karti-kɔnɔfɛnw, enki suguya, sɛbɛnni kɛcogo, furakɛlicogo, sɛbɛnni datugucogo, ani laminatɛri cogoyaw di walasa finimugu min bɛ kɛ ka kɛɲɛ ni sariya ye walima min barika ka bon, o ka se ka jateminɛ.
Kɔrɔbɔli yɛrɛyɛrɛ dabɔcogo ni a doncogo kɔrɔbɔ ni sɛbɛnnikɛlan laɲininen ye, enki, laminatɛri, punch masin, kalanbaga, encodeur, mɔgɔ yɛrɛ ka minɛnw, ani karti dafalen jogoɲumanya wajibiyalenw.
Aw ye aw ka karti jɔcogo, a datugucogo janya, PET inlay suguya, frequency, puce, antenne, sheet layout, sɛbɛnni kɛcogo, hakɛ ani taayɔrɔ ci walasa ka poroze kɛrɛnkɛrɛnnen ladilikan dɔ sɔrɔ.
Aw ye Ladilikan dɔ sɔrɔ min bɛ kɛ ni fɛnw yePETG datugulan, karti-kɔnɔ-sɛbɛnw sɛbɛnnenw, ani PET-kɔnɔ-sɛbɛnw bɛ labɛn, ka saniya, ka sɛgɛsɛgɛli kɛ, ka labɛn ka kɛɲɛ ni sɛbɛnw labɛncogo ni karti-yɔrɔ ja ye min dagalen don.
Sɛbɛn minnu sɛbɛnna, olu ka kan ka baara kɛ ni sɛbɛnni taamasiyɛn tigitigiw ye walasa ja, antɛni jɔyɔrɔw, puwɛntiw, tigɛlanw, magɛnni sɛrɛkiliw ani karti dakunw ka to ka bɛn ɲɔgɔn ma ka ɲɛ.
Fɛn min bɛ ɲɛfɛ, o min ye sɛbɛn ye, o ye PET inlay ye, o ye kɔfɛla ye min bɛ se ka kɛ, ani min bɛ kɛ kɔfɛ, o bɛ kɛ ɲɔgɔn kan cogo la min dagalen don. Yɔrɔ minnu datugulen don, olu ka kan ka ɲɛsin siriyɔrɔw ma minnu bɛnnen don.
Funteni ni degun min bɛ kɔrɔsi, olu bɛ layiniw siri ɲɔgɔn na. Lamini furakɛcogo ka kan ka sigi sen kan sɛgɛsɛgɛli fɛ barisa funteni, degun, walima cycle waati tɛmɛnen bɛ se ka nɔ bila flakɛli la, puwɛnti jɛɲɔgɔnya la, antɛni baarakɛcogo la, kɛnɛya la, ani sɛbɛnfura dɔgɔyali la.
Lamini kɛlenw bɛ nɛnɛ cogoyaw la minnu bɛ kɔrɔsi walasa ka karti jɔcogo sabati ani ka dɔ bɔ a wulicogo, a bɔgɔbɔgɔli, a bugunw ani a sirili ɲɔgɔn na.
O sɛbɛn lamininenw bɛ sɔgɔ ka kɛ kartiw ye, o kɔfɛ, u bɛ se ka sɛbɛnni kɛ, ka kodɔn kɛ, ka laser taamasiyɛn kɛ, ka u kɛ fɛn ye min bɛ se ka kɛ fɛn ye, ka puwɛnti-module sigi, ka magnɛti kodɔn, ka siginiden-panɛli kɛ, walima ka finimugu wɛrɛw kɛ.
RFID kartiw ka kan ka kɔrɔbɔ ni kalanbagaw ye minnu laɲininen don walasa ka puwɛntiw dɔnni, kunnafonidilanw, antɛni tɛmɛsira, kalan yɔrɔjan, u ɲɛsincogo, u kodɔnni, ani sistɛmu bɛnkanw dafa.
PETG ni PET bɛ tali kɛ kemikaliya la nka u tɛ jatedenw ye minnu bɛ se ka ɲɔgɔn falen . U ka kristali, u nɔgɔyali jaabi, u dɔgɔyali ani u sanfɛla nɔrɔli tɛ kelen ye. PETG/PET/PVC kartiw kulu ɲagaminenw mago bɛ taabolo tiɲɛni na; diɲɛ bɛɛ lajɛlen lamini funteni walima otomatiki bɛnkan man kan ka jate.
| Control Point | Fɛn min ka kan ka sɛgɛsɛgɛ | Mun na a nafa ka bon |
|---|---|---|
| Coating fan fɛ | Aw bɛ ɲɛda furakɛlen taamasiyɛn ani k’a bɛn ni sɛbɛnfura ye min dagalen don | Ni aw ye a bila kɔfɛ, o bɛ se ka kɛ sababu ye ka ɲɔgɔn siri koɲuman ani ka dakun kɔrɔta |
| Enki chimie ani furakɛli | Aw bɛ offset, screen walima UV ink dɔn; a sɛbɛnnen yɔrɔ min kɛnɛyara pewu, o kɔrɔbɔ | Enki min ma kɛnɛya kosɛbɛ, o bɛ se ka bugunw lawuli walima ka dɔ bɔ a ɲɛkisɛ fanga la |
| PET ni PETG ka kalasi | Aw bɛ resin hakɛ tigitigi sɛbɛn, a jateminɛnan, a ɲɛsincogo ani a furakɛcogo ka kɔn a furakɛcogo ɲɛ | Dɔgɔyali ni sirili kɛcogo danfaralenw bɛ se ka kɛ sababu ye ka kurukuru walima kurukuruni bila mɔgɔ la |
| Funteni, degun ani nɛnɛ | Aw bɛ furakɛcogo dɔ sigi sen kan min dabɔra ni lamination presse yɛrɛ ye | Ni aw ye baara kɛ ka tɛmɛ, o bɛ se ka kartiw wuli walima ka puwɛnti ɲɔgɔndanw tiɲɛ |
| Nɛgɛ sɛbɛnni ni RFID | Aw bɛ papiye, enki conducteur, stripe magnétique ani antenne yɔrɔw lajɛ | Olu bɛ se ka nɔ bila RF coupling walima processing clearances la |
| Finished-card ka setigiya | Aw bɛ a ɲɛkisɛ, a flakɛ, a bonya, a RF kalanni/sɛbɛnni ani a kɔrɔbayali sɛgɛsɛgɛ | Inlay tɛmɛnen dɔrɔn tɛ karti dafalen seereya |
Baara kɛ ni karti dafalen misali ye ani baarakɛcogo sɛbɛnnenw ye walasa k’a dɔn ni fiɲɛ dɔ bɔra finimugu dacogo la, enki sɛbɛnnen na, PET kɔnɔna na, puce sirili la, antɛni jateminɛcogo la walima lamination cycle laban na.
| Gɛlɛya kɔlɔsilen | A sababu bɛ se ka kɛ | Sɛgɛsɛgɛli ladilikan |
|---|---|---|
| Overlay peeling walima dawolo kɔrɔta | Kɛrɛfɛla dacogo jugu, enki min tɛ bɛn ɲɔgɔn ma walima a sirili dafalen tɛ | Aw bɛ finimugu ɲɛda, tintin kɛnɛyalen, saniya ani ɲɛgɛnw sɛgɛsɛgɛli cogoyaw sɛgɛsɛgɛ |
| Bugunw walima sisi | Fiɲɛ min sirilen don, nɔgɔ, furaji tolen walima funteni cycle min man ɲi | Aw bɛ sɛbɛnfura saniya, tintin furakɛli, plati tansiyɔn ani funteni cogoya lajɛ |
| Warping walima shrinkage bɛnbaliya | PET/PETG layɛrɛw balanbaliya, fɛnw ɲɛsincogo walima nɛnɛ caman ɲɔgɔnna | Aw bɛ layɛrɛ jateminɛnanw ni masin ɲɛminɛcogo suma ɲɔgɔn na; aw bɛ segin flati sɛgɛsɛgɛliw kan |
| RF karti bɛ dɛsɛ lamination kɔfɛ | IC bond tiɲɛnen, antɛni kari walima sigida degun kojugu | Aw bɛ RF jaabi lajɛ sani lamini ka kɛ ani a kɔfɛ; aw bɛ puwɛnti yɔrɔw sɛgɛsɛgɛ |
| Kalan janya surunya sɛbɛnni kɔfɛ | Antɛni detuning, nɛgɛ enki walima karti laban jateminɛ min ma labɛn | Kɔrɔbɔli laban stack kan kalanbaga kofɔlen, fixture ani orientation |
| Puce bump walima antenne yelen cogoya | Kɔnɔbara/kɛrɛnkɛrɛnnenya la walima degun kojugu | Aw ye prelam girinya karti lajɛ ani sigida fɛnw bolicogo |
| Punching bɛ chip walima coil tiɲɛ | Layidu tacogo jugu walima conducteur clearance ma dafa | Aw bɛ CAD karti fɔcogo, punching clearance ani inlay position bɛn ɲɔgɔn ma |
| Surface scratches walima gloss caman ɲɔgɔnna | Foroko sɔgɔli, plati nɔgɔlen walima grade mix-up | Aw bɛ filimu minɛcogo, plati fini, interleaving ani lot control sɛgɛsɛgɛ |
Fɛnɲɛnɛma ni coating-grade sɛgɛsɛgɛli.
Sɛgɛsɛgɛli min bɛ kɛ a janya ni a bonya ni a bonya kan.
Transparence, haze, gloss, ani surface-finish sɛgɛsɛgɛli.
Bugun, sɔgɔsɔgɔninjɛ, kurukuru, pinɛ, ani nɔgɔ sɛgɛsɛgɛli.
Coating uniformité ani coated-side identification.
Kɔrɔbɔli lamini, flakɛli, dɔgɔyali, ani peel-strength evaluation.
PET tabaga minɛn, a bonya, a bonya, ani a sɛbɛncogo sɛgɛsɛgɛli.
Puce model, a hakɛ, a jɔyɔrɔ, ani a ɲɛsincogo sɛgɛsɛgɛli.
Antɛni hakɛw, a kɛlɛli, a tɛmɛsira, a ɲɔgɔndan, ani a sɛgɛsɛgɛli yelen.
Puce-to-antenna jɛɲɔgɔnya ani kuran-baarakɛcogo sɛgɛsɛgɛli.
Surface flatness, encapsulation, bubble, ani dunan-fɛnw sɛgɛsɛgɛli.
Karamɔgɔ ka kumaɲɔgɔnya, UID kalanni, hakilijagabɔ sɔrɔli, walima kodɔn sɛgɛsɛgɛliw ka kɛɲɛ ni puce sugandilen ye.
Finished dimensions ani a janya.
Surface (yɔrɔ) cogoya, a jɛlen, a yeelen, ani a sɛbɛnni yecogo.
Layɛrɛ sirili, dakun nɔrɔli, bulonw, ani delamination.
Karti fla, a kɔrɔta, a torsion, ani a minɛcogo masin fɛ.
Puce kalanni, kodeli, hakilijagabɔ, antɛni ani kalanbaga ka bɛnkan.
A kɛcogo kɛrɛnkɛrɛnnenw ka muɲuli, sigida, ani kɔrɔya sɛgɛsɛgɛliw yɔrɔ minnu na a ka kan.
Walasa ka B2B karti dilanni kɛ min bɛ se ka segin-ka-bɔ, aw bɛ sanu misali dɔ sigi sen kan ni finimugu ni fɛnw doncogo ɲɛfɔli danfaralenw ye, o kɔ aw bɛ sɛgɛsɛgɛliw sɛbɛn minnu bɛ tali kɛ sannifeere kelen-kelen bɛɛ la. Sɛgɛsɛgɛlikɛyɔrɔ minnu sugandira, olu bɛ duguma; muɲuli labanw ni fɛɛrɛw ka kan ka bɛn sɛbɛn kɔnɔ.
| Sɔnfɛn | PETG Overlay / PET Core | RFID PET Inlay / Karti dafalen |
|---|---|---|
| Fɛnɲɛnɛmaw ka danyɔrɔ | Resin grade, kulɛri, coating fan, fournisseur lot | Puce dilanko, IC tigitigi, antenne ani PET tabaga lot |
| Dimensions (yɔrɔ) minnu bɛ yen | A janya, a janya/a bonya, a kɛnɛ ani a sumaya dɔgɔyali | Karti fɔcogo, a tɔgɔ sɛbɛnni, antɛni/puce yɔrɔw ani sigida jateminɛnan |
| Yecogo ɲuman | Bugun, jɛya, buguri, sɔgɔsɔgɔninjɛ, kurukuruw ani finimugu nafama | Antɛni tɛmɛsira, puce-zone cogoya ani encapsulation nafama |
| Taabolo tiɲɛni | Enki bɛnkan, lamination recipe ani peel fanga | Prelam-to-finished-card kuran sɔrɔli ani tuned kalan hakɛ |
| Minɛnw ka bɛnkan | Imprimante, jalen layini, laminatɛri, nɛnɛ ani punch baarakɛminɛnw | Karamɔgɔ modɛli, protocole, encodeur, RF fixture ani test script |
| Loti kɔlɔsili | Formula de couture approuvée, pake, labeling ani batch reference | Puce/antenne dilancogo min dabɔra, RF tɛmɛsira sariyaw ani fɛn caman Changement approvals |
| Sɛbɛnni minnu bɛ kɛ | TDS, COA walima poroze kɛrɛnkɛrɛnnenw sɛgɛsɛgɛli rapɔɔri bɛnna yɔrɔ min na | Chip lot list, kuran jaabi, sample approval ani traceability yɔrɔ minnu na bɛnkan sɔrɔla |
Sani a ka dilan, aw bɛ misali tacogo labɛn ani sɛgɛsɛgɛli minnu bɛ kɛ sɛbɛnfura jɔyɔrɔ kelen-kelen bɛɛ kan, aw bɛ o dafa ka kɛɲɛ ni misali ciden ye. Aw ye aw yɛrɛ tanga sɛgɛsɛgɛli kɛlenw ma minnu bɛ kɛ ni fɛnw ye i n’a fɔ ID walima wari sarali karti dafalen seereyali.
Wallis bɛ dɛmɛ don PETG dacogo ni PET inlay dilanni na min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka ɲɛsin prototypes ma, pilot orders, scheduled bulk orders, ani karti-materiel dicogo porogaramuw kuntaalajan.
Sɛnɛfɛnw dilanni jɛ-ka-baara bɛ se ka kɛ fɛnw labɛnni ye, u dacogo, u tigɛcogo, antɛni dilanni, puwɛnti sirili, fɛnw doncogo ɲɔgɔn na, kuran sɛgɛsɛgɛli, sɛbɛnw labɛncogo kɔlɔsili, pakew dilanni, u sɛbɛnni, ani u bilali sɛbɛnw na.
PETG Overlay ka baarakɛcogo
PET Inlay Baarakɛyɔrɔ
Ka fara finimugu datugulen ni RFID sɔgɔlifɛnw kan, Wallis bɛ se ka PET, PETG, PVC, polikarbonati, core sheet, printable sheet, magnetic stripe overlay, ani composite card-material requirements minnu bɛ tali kɛ ɲɔgɔn na, olu labɛn.
PET sɛbɛn min bɛ kɛ karti dilanni na
PET Karti Core Materiel
PETG datugulanw ka kan ka tanga buguri, sɔgɔsɔgɔninjɛ, ji, kɔrɔtacogo, bolokɔnincininw ani nɔgɔ ma. RFID inlays fana mago bɛ lakanani na ka bɔ degun tɛmɛnenw na, funteni min tɛ kɔrɔsi, ka bɔ fɛnw bɔli la yɔrɔ kelen na, ka u yɔrɔw tiɲɛ, ani ka u mara cogo bɛnbaliw la.
Aw bɛ PE filimu walima kɔnɔnatumu lakananen saniya.
Kraft papier walima pake sirilen min tɛ ji bɔ.
Kartɔn fla, kɛsu barikama, jiribolo, walima palɛti foroko.
Nkɔni ni dakun lakanani walasa ka dɔ bɔ bɔgɔbɔgɔli la.
Danfara sɛbɛnw walasa ka puwɛntiw, antɛniw ani filimu yɔrɔw lakana.
Loti nimɔrɔ, fɛn min bɛ kɛ, a bonya, a puce, a frequency, layout, ani orientation labels.
OEM taamasiyɛnw, cikan taamasiyɛnw, ani pakew lisi minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Fɛn minnu datugulen don u foroko fɔlɔ kɔnɔ, olu mara yɔrɔ saniyalen na, yɔrɔ min jalen don, yɔrɔ min funteni bɛ se ka kɔlɔsi. Aw bɛ u yɔrɔ janya tile yeelen tilennen na, funteni barikamaw, nɛnɛ kojugu, doni girinmanw, buguri, ani kemikɛlifɛnw.
Wallis Karti Materiel Depo
Ni i bɛ ɲinini tigitigi kɛ ka ɲɛsin quotation ma, o ka kan k’a jira ni i bɛ PETG overlay dɔrɔn san, PET core dɔrɔn, RFID inlay dɔrɔn walima set matched . Nin kunnafoni ninnu tilatilali bɛ dɛmɛ ka sɔngɔko jugu ni misali tacogo kunntanw bali.
| Quotation Field | Details ka kan ka di |
|---|---|
| Fɛn dilannenw hakɛ | PETG datugulen dacogo, PET kɔnɔna gansan, antɛni tabaga, RFID pre-inlay, prelam walima faralen ɲɔgɔn kan |
| Overlay (dafalen) ɲɛfɔli | A bonya, a laban, a dacogo/a fanga, a sɛbɛnni kɛcogo ani a kuru/sɛbɛn hakɛ |
| PET inlay ka ɲɛfɔli | Gauge, PET grade/color, RFID option, antenne, puce ani ja min dagalen don |
| Karti dilanni | Finished-card size and thickness, card layout, printed core, masin ani lamination kɛcogo |
| Karamɔgɔ ni QA | Puce protocol, kalanden modɛli, RF sɛgɛsɛgɛli sariyaw, peel/flatness dan ani sample hakɛ |
| Jagokɛlaw ka yamaruya | Kɔrɔbɔli hakɛ, san ɲinini, laɲini pakew, taayɔrɔ ani sɛbɛnw ɲininenw |
Wallis bɛ baara kɛ ni karti dilannikɛlaw ye, RFID fɛn caman tigɛlikɛlaw, karti hakilitigiw iziniw, lakana sɛbɛnnikɛlaw, tilabagaw, mɔgɔya kɛyɔrɔw, ani OEM kiliyanw minnu bɛ fɛnw wajibiya minnu bɛ kɛ ka fɛnw datugu ani ka fɛnw don u kɔnɔ minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye.
PETG dakun kelen, PET kɔnɔna, RFID inlay, ani karti-minɛnw sɔrɔcogo.
PET gansan, antɛni dɔrɔn, RFID pre-inlay, ani prelaminated inlay sugandiliw.
LF, HF, NFC, UHF, ani poroze fila-fila minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Puce, antenne, janya, sɛbɛn hakɛ ani karti labɛncogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Sugandili minnu bɛ kɛ ni finimugu ye, minnu datugulen don kosɛbɛ, minnu bɛ kɛ ni matte ye, minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ se ka kɛ laser ye, ani minnu bɛ se ka datugu ni magnɛti ye.
Prototype ni sample dɛmɛni lamination ni kalanbaga sɛgɛsɛgɛli kama.
Jogoɲumanya sɛgɛsɛgɛli, lot traceability, export pakew, ani OEM labeling.
Aw ka karti dafalen jɔcogo, a kɛcogo, a janya, a sɛbɛnfura labɛncogo, RFID frequency, puce, antenne, sɛbɛnni kɛcogo, kalanden kunnafoniw, a hakɛ jateminɛlen, ani a ciyɔrɔ ci Wallis ma.
Aw ye Custom Quotation ɲiniPETG dacogo ye a ka c’a la, lakanani yɔrɔ jɛlen ye min bɛ karti lamininen ɲɛfɛ walima a kɔfɛ. PET inlay ye kɔnɔna jɔli walima baarakɛcogo ye, wa a bɛ se ka kɛ RFID puce ni antenne bɛ sɔrɔ a kɔnɔ.
Ayi, PET inlay bɛ se ka kɛ structurel core gansan ye min tɛ ni ɛntɛrinɛti ye, inlay min bɛ kɛ ni antenne dɔrɔn ye, inlay min bɛ kɛ ni puce ni antenne ye ka kɔn, walima inlay min bɛ kɛ ni RFID prelaminated dafalen ye. Sannikɛlaw ka kan ka suguya wajibiyalen fɔ.
PETG dacogo bɛ sɔrɔ ka bɔ 0,04mm ɲɔgɔn na ka se 0,15mm ma. Sugandili minnu bɛ kɛ tuma caman na, olu ye 0,06mm, 0,08mm ani 0,10mm ye, k’a sɔrɔ a janya bɛ se ka jateminɛ ka kɛɲɛ ni karti jɔcogo ye.
Awɔ. PET inlay janya ka kan ka sugandi ka kɛɲɛ ni puce, antenne, karti layɛrɛw, karti dafalen janya, lamination kɛcogo, ani masinw ka wajibiw ye.
Porozɛ suganditaw bɛ se ka kɛ 125kHz LF, 13.56MHz HF walima NFC, UHF, ani dual-frequency configurations ye. A sɔrɔli bɛ bɔ puce sugandilen na, antɛni, a labɛncogo, a hakɛ ani a kɛcogo.
Awɔ. Puce tɔgɔ tigitigi, a dilabaga, a hakilijagabɔ, a protocole, a lakanani wajibiyalen, a kalanbaga modɛli, ani a san hakɛ di. Wallis bɛ se ka sɔrɔli ni inlay bɛnkan jateminɛ.
Kupu nɛgɛ ni aluminiyɔmu etched antɛni suganditaw bɛ se ka jateminɛ. Dilancogo ɲuman bɛ bɔ frequency (fɔkan) la, puce capacitance (puce capacitance), karti hakɛw, kalan yɔrɔjan, a dilanni fɛɛrɛ, ani musaka laɲini.
Fɛn ɲagaminenw jɔcogo bɛ se ka kɛ ni finimugu, tintin, nɔgɔya funteni, dɔgɔyali, degun ani nɛnɛ cogoyaw bɛ bɛn. Sɛgɛsɛgɛli ka kan ka kɛ sani u ka kɛ fɛn caman ye.
Sɛbɛnni bɛ se ka kɛ ni yɔrɔ ye min furakɛra walima ni yɔrɔ bɛnnen ye min bɛ se ka sɛbɛn. Encre, curing method, print position, bonding side, transparency ani lamination compatibilité ka kan ka sɛgɛsɛgɛ.
Awɔ. Karti hakɛ sɛbɛnfura kelen kɔnɔ, sɛbɛn hakɛw, antɛni jɔyɔrɔ, puce jɔyɔrɔ, sɛbɛnni taamasiyɛnw, punch dakunw, ani karti ɲɛsincogo bɛ se ka kɛ ka kɛɲɛ ni ja ye min dagalen don.
Kɔrɔbɔli bɛ se ka kɛ antɛni tɛmɛsira, a kɛlɛli, puwɛnti sirili, puce dɔnni, kalanbaga ka kumaɲɔgɔnya, UID kalanni, hakilijagabɔ sɔrɔli, kodɔn, sɛbɛnfura labɛncogo, a janya, ani ɲɛnayeli sɛgɛsɛgɛli.
Ayi, Lakanali bɛ bɔ puce sugandilen na, dantigɛli fɛɛrɛ, kodɔn, kilisi, kalanbagaw labɛncogo, kɔkan porogaramuw, seereyaw ɲɛnabɔli, kartiw kɛcogo, ani sistɛmu bɛɛ dilanni.
PET ni PETG fɛnw bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn wɛrɛ ye, ni u lajɛcogo ni u labɛncogo bɛnnenw ye. Nka, karti dafalenw lasegincogo bɛ bɔ finiw, tintinw, nɛgɛw, puwɛntiw, antɛniw, magɛnni sɛrɛkiliw, polimɛri ɲagaminenw, ani sigida laseginfɛnw na.
Awɔ. Sɛgɛsɛgɛli ni piloti sɛgɛsɛgɛli bɛ ladilikan di walasa ka sɛbɛnni, finimugu nɔrɔli, layɛrɛ sirili, karti flakɛli, puce kalanni, antɛni baarakɛcogo, punching, personalization, ani kalanbaga bɛnkan sɛgɛsɛgɛ.
Aw ye fɛn min bɛ datugu, a bonya, a sanfɛla, a dacogo, a doncogo suguya, a sɛbɛnfura hakɛ, a karti labɛncogo, a kɛcogo, a puce, a antenne, a sɛbɛnni kɛcogo, a kalanbaga, a hakɛ jateminɛlen, a foroko, ani a ciyɔrɔ di.
Ayi PETG ye poliyesitɛri ye min sɛgɛsɛgɛra ni glycol ye, ka sɔrɔ PET hakɛ minnu bɛ kɛ kariti kɔnɔna na, olu bɛ se ka kɛ ni dɔgɔyali, kristalini ani funteni jaabi tɛ kelen ye. Karti ɲagaminen kulu ka kan ka se ka kɛ ni finimugu yɛrɛyɛrɛ ni minɛnw ye.
A ka c’a la, pre-inlay kɔnɔ, chip-and-antenne assembly bonded bɛ sɔrɔ carrier dɔ kan min mago bɛ karti caman cili la. Prelam bɛ baarakɛ RFID jɛkulu datugu karti-kɔnɔna jɔcogo labɛnnen kɔnɔ. Fɛn dicogo tigitigi ka kan ka ɲɛfɔ ja kan.
Aw bɛ finimugu fila bɛɛ girinya tɔgɔlamaw fara a kan, u kolo sɛbɛnnenw ani cɛmancɛ kɔnɔna walima prelam, o kɔ aw bɛ u janya yɛrɛyɛrɛ dafa lamini kɔfɛ. Fɛnɲɛnɛmaw degun, jibɔ ani chip-zone geometry bɛ se ka sumanikɛlan banbali Changer.
A tɛ kɛ a yɛrɛma. PETG min dilannen don ni sariya ye, o tɛ laser jaabi ye. Laser taamasiyɛn bɛ kɛ ni kalasi kɛrɛnkɛrɛnnen ye min bɛ se ka kɛ ani ka sɛgɛsɛgɛli kɛ laser laɲininen kan ani karti jɔcogo dafalen kan.
Antɛni detuning, puce-bond tiɲɛni, nɛgɛ sɛbɛnni walima karti stack caman cili bɛ se ka nɔ bila baarakɛcogo la. Aw bɛ o dilancogo kelen kɔrɔbɔ ka kɔn lamini ɲɛ ani a kɔfɛ ni kalanbaga, ɲɛsincogo ani sumanikɛcogo kofɔlen ye.
Ayi, funteni, tansiyɔn, funteni waati ani nɛnɛ hakɛ bɛnnen bɛ bɔ PETG datugucogo hakɛ tigitigi la, PET kɔnɔna, enki, finimugu, ɛntɛrinɛti ani laminatɛri. Baara kɛ ni pilot-production furakɛcogo ye min dagalen don.
A tɛ kɛ ka kɛɲɛ ni default ye. Frequences, chip data formats ani reader protocoles bɛ se ka danfara don. Aw bɛ baarakɛcogo sariya tigitigi ni kalanbaga dafa sanni aw ka RFID furaw bɛɛ minɛ minnu ka dɔgɔn.
Aw bɛ fɛnw ɲɛfɔcogo dafalen mara, karti-stack ja, sanu misali, puce ni antɛni yɔrɔ nimɔrɔw, sɛgɛsɛgɛli kɛcogo, lot traceability ani sɛbɛn sɔnni fɛn o fɛn walima taabolo caman caman cili la.
