PETG Overlay Film na Plastik Kpekpeɖeŋugbalẽvi Lamination

PETG Overlay Film na Plastik Kpekpeɖeŋugbalẽvi Lamination

Wallis supplies PETG overlay film for plastic card lamination , si naa ametakpɔnu si me kɔ kple kadodo ƒe ƒuƒoƒo si ŋu kakaɖedzi le na ID-gbalẽviwo, mɔɖeɖegbalẽviwo, fexexegbalẽviwo, ʋuɖoɖogbalẽviwo, hamevinyenye gbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo, RFID kaɖiwo, NFC kaɖiwo kple smart card siwo wowɔ ɖe ɖoɖo nu.

Tiatia siwo li dometɔ aɖewoe nye dzidzenu si wofa nutsyɔnu, sesẽ si wofa nutsyɔnu, non-coated PETG film, tata ƒe dzesiwo, tɔxɛ laser-ame ŋutɔ ƒe dzesiwo kple magnetic fli tsyɔ. Woate ŋu atrɔ asi le eƒe titrime, agbalẽ ƒe didime, anyigba ƒe nuwuwu, nutsyɔnu ƒe ŋusẽ, agbalẽtata ƒe sɔsɔ, magnet-ka ƒe nɔnɔme, nubablɛ kple ŋkɔwo ŋu na B2B wɔwɔ.

PETG Overlay ƒe Adzɔnuwo ƒe Nɔnɔmewo

Mɔ̃ɖaŋununya ƒe asixɔxɔwo abe fafɛƒe, shrinkage, peel ŋusẽ, anyigba ƒe tete kple lamination nɔnɔme siwo wokafu la toa vovo le grade nu. Ðo kpe wo dzi to Wallis ƒe mɔ̃ɖaŋu ŋuti nyatakaka gbalẽvi si dzi woda asi ɖo kple ewɔwɔ ƒe kpɔɖeŋu dzi hafi woawɔ wo le agbɔsɔsɔ gã me.

Nukae Nye PETG Overlay Film?

PETG ƒe nutsyɔnu nye kaɖi wɔwɔ ƒe film tsɛ aɖe si me kɔ si wotsɔ polyester si wotsɔ glycol trɔ asi le. Wodaae ɖe kaɖi ƒe nuto si wota dzi eye wotsɔa dzoxɔxɔ ƒe kaƒoƒo blanɛ be wòanye kaɖi si wowu enu ƒe ŋgɔgbe alo megbe si akpɔ eta.

To vovo na ametakpɔnu si wotsɔna léa nu ɖe ​​eɖokui ŋu si wozãna ɖaa la, zi geɖe la, wotsɔa dzoxɔxɔ kple nyaƒoɖeamenu ƒoa PETG-kaɖi si wofa ɖe nu ŋu la nu ƒu. Akpa si ŋu wofa nu ɖo la dze ŋgɔ kaɖi si wota ƒe ƒuƒoƒo si sɔ, gake gota gome ya wɔa kaɖia ƒe akpa si woate ŋu akpɔ.

Eƒe taɖodzinue nye be wòakpɔ nɔnɔmetata siwo wota ta, ana interlayer ƒe kadodo nanyo ɖe edzi, akpe asi ɖe kaɖi ƒe titrime si hiã ŋu eye wòana anyigba si wotia si le keklẽm, matte, frosted alo functional surface.

PETG ƒe Nutsyɔtsyɔ Ƒomeviwo

Standard Coated PETG Nutsyɔnu

Standard coated overlay la nyea kadodo ƒe atikewɔwɔ le akpa si woɖo be woatsɔ aƒo ka na kaɖia. Esɔ na PETG nu vevi siwo sɔ kple PET, PVC alo kaɖi ƒe ƒuƒoƒo tiatia aɖewo le kpɔɖeŋu ƒe kpeɖodzinana megbe.

Sesẽ si Wofa PETG Overlay

Wotrɔ asi le nutsyɔnu sesẽ si wotsɔ bla nu ŋu na dɔ siwo bia be woalé ɖe nu sesẽ siwo wota ŋu nyuie wu, nuŋlɔtsi ƒe nutsyɔtsyɔ gã alo kaɖi ƒe xɔtunu siwo wotsɔ nu vovovowo tsakae. Ele be woatsɔ nuƒlela ƒe nuŋlɔtsi ŋutɔŋutɔ kple alesi wowɔa dɔe ado nusi wotsɔ blae la akpɔ.

PETG ƒe Nutsyɔnu si Womefa O

Wotiaa PETG film si womefa o ne kaɖi ƒe wɔwɔme, agbalẽtata ƒe ƒuƒoƒo alo gotagome kadodo ƒe ɖoɖoa na alesi wòhiã be wòalé ɖe eŋu xoxo. Mele be woatsɔe aɖo film si ŋu wofa nu ɖo teƒe ne womedo lamination kpɔ o.

PETG Overlay si woate ŋu ata

Nutsyɔnu si woate ŋu ata zãa anyigba si ŋu wowɔ atike ɖo si sɔ na nuŋlɔtsi ƒe ɖoɖo aɖe si woɖo ɖi. Ele be nuƒlelawo naɖo kpe akpa si woate ŋu ata, akpa si wofa nu ɖo be woatsɔ ablae kple nenye be wotae do ŋgɔ na lamination alo emegbe.

Laser-Ame ŋutɔ ƒe Nɔnɔme PETG Dzeside

Woate ŋu ada dzesi tɔxɛwo kpɔ hena laser dzesidede alo laser ame ŋutɔ ƒe tɔtrɔ. Laser ƒe ŋuɖoɖo nɔ te ɖe additives, layer ƒe wɔwɔme, laser wavelength, ŋusẽ, susu kple ame ŋutɔ ƒe dɔwɔnuwo dzi.

Magnetic Stripe PETG ƒe Nutsyɔnu

Magnetic coated overlay ƒoa HiCo alo LoCo ƒe fli ɖeka ɖe overlay sheet la me. Ele be woaɖo kpe fli ƒe dzizizi, kekeme, teƒe, mɔfiame, amadede, encoder kple nuxlẽla ƒe sɔsɔ dzi to nɔnɔmetata kple kpɔɖeŋu si dzi woda asi ɖo me.

PETG ƒe Nutsyɔtsyɔ ƒe Nɔnɔme Veviwo

Nukpɔkpɔ ƒe Kɔkɔe ƒe Kɔkɔe

PETG ƒe nutsyɔnu si me kɔ kpena ɖe foto siwo wota, dzesidenuwo, nuŋɔŋlɔwo, barcodewo, QR codewo kple nyatakaka siwo trɔna ŋu be woanɔ dzedzem nyuie le lamination megbe.

Lamination Bonding si ŋu kakaɖedzi le

Bonding coating si wotia kpena ɖe ame ŋu wòwɔa kaɖi ƒe wɔwɔme ɖeka eye wòɖea peeling, edge lifting, bubbles kple layer separation dzi kpɔtɔna ne wozãe kple inks siwo sɔ kple lamination nɔnɔme siwo dze.

Anyigbadzinuwo Takpɔkpɔ

Nusi wotsɔ blae la kpɔa kaɖi ŋuti nyatakaka siwo wota ta tso aŋɔsisi, tsidzadza, asibidɛ ƒe dzesiwo, ɖiƒoƒo kple eŋudɔwɔwɔ enuenu le kaɖia zazã edziedzi me.

Agbɔsɔsɔme Dzi Kpɔkpɔ

Dziɖuɖu ƒe titrime kple agbalẽ ƒe didime doa alɔ ƒuƒoƒo ƒe akɔntabubu siwo woate ŋu agblɔ ɖi, kaɖi ƒe titrime dzikpɔkpɔ, ŋkɔ ŋɔŋlɔ kple punching ƒe nyateƒetoto.

Anyigbadzinu Tiatia si Trɔna Ðe Nɔnɔmewo Ŋu

Glossy, matte, frosted, low-glare kple textured finishes ɖea mɔ na kaɖiwɔlawo be woada asɔ le gaglãgbe, nukpɔkpɔ ƒe dzedzeme, asikaka nu ŋu ƒe seselelãme kple ŋugbledede me.

Nuwɔwɔ ƒe Nɔnɔme Siwo Wotrɔ Asi Le

Woate ŋu atsɔ PETG ƒe nutsyɔnu ana abe A4 agbalẽviwo, A3 agbalẽviwo, agbalẽwo ƒe ɖoɖo siwo wowɔ ɖe ɖoɖo nu, slit film alo agbalẽ xatsaxatsawo le nuƒlela ƒe agbalẽtata kple lamination dɔwɔnuwo nu.

Viɖe Siwo Dona Na Kpekpeɖeŋugbalẽvi Dɔwɔƒewo

Nɔnɔmetata Siwo Wota Me Kɔkɔ

Nukpɔkpɔ si me kɔ ŋutɔ kpena ɖe ame ŋu be amadede siwo wota, fotowo kple nuŋɔŋlɔ nyuiwo ƒe dzedzeme si woɖo be woanɔ la nanɔ anyi ne wotsɔ ƒuƒoƒoawo ƒo ƒu vɔ.

Kpekpeɖeŋugbalẽviwo Dzikpɔkpɔ ƒe Dɔwɔwɔ Nyuitɔ

Nutsyɔnu si wotia nyuie kpena ɖe ame ŋu be wòate ŋu anɔ te ɖe bɔbɔ, asitutu, anyigba ƒe vuvu kple asiléle edziedzi nu. Kpekpeɖeŋugbalẽvi mamlɛtɔ ƒe agbenɔƒe gakpɔtɔ nɔ te ɖe xɔtutu kple subɔsubɔ ƒe nɔnɔme bliboa dzi.

Afɔku si le Delamination me dzi ɖe kpɔtɔ

Ne wotsɔ nusi wotsɔ blae la sɔ kple kaɖia ƒe nuto kple nuŋlɔtsi la, ate ŋu ana lãgbalẽa ƒe dɔwɔwɔ nanyo ɖe edzi eye wòaɖe kadodo si gbɔdzɔ le ƒuƒoƒoawo dome dzi akpɔtɔ.

Nusiwo sɔ kple Smart Card ƒe Dɔwɔɖoɖowo

Woateŋu azã PETG ƒe nutsyɔnu le kaɖi siwo me RFID alo NFC inlays, contact chips, magnetic stripes, barcodes, signature panels kple dɔwɔwɔ ƒe ƒuƒoƒo bubuwo le le xɔtuɖoɖo ƒe kpeɖodzi blibo megbe.

Nuwɔwɔ le Agbɔsɔsɔme Si Woate Ŋu Akeke Ðe Edzi

Agbalẽvi ƒe lolome, eƒe titrime, eƒe anyigba kple nusi wotsɔ blae si mewɔa tɔtrɔ o doa alɔ agbalẽtata, stacking, lamination kple punching si woate ŋu agbugbɔ aƒo le kaɖi si ƒe lolome lolo me.

PETG Overlay le Smart Card Xɔtutu me

Le smart card si wotsɔ laminated wɔe si bɔ me la, wozãa PETG overlay abe gotagome ametakpɔnu ene. Kpekpeɖeŋugbalẽvi ƒe ɖoɖo si bɔ ate ŋu anye:

1. Ŋgɔgbe si me kɔ PETG si wofa nutsyɔnu.

2. Kpekpeɖeŋugbalẽvi si wota ɖe ŋgɔgbe.

3. Gbedadaƒo xɔtuɖoɖo ƒe nuto, RFID inlay, NFC inlay alo dɔwɔwɔ ƒe ƒuƒoƒo bubu.

4. Agbalẽvi si wota ɖe megbe si nye card-core.

5. Megbe si me kɔ PETG si wofa nutsyɔnu.

Ele be layer ƒe akɔntabubua nabu taɖodzinu si wu enu-kaɖi ƒe titrime, chip alo antenna ƒe kɔkɔme, printed-core ƒe titrime, coating ƒe titrime, overlay ƒe titrime kple mɔkpɔkpɔ ƒe nutete le lamination me ŋu.

PETG ƒe Nutsyɔtsyɔ Dɔwɔnawo

Dzesidegbalẽviwo

PETG ƒe nutsyɔnu kpɔa fotowo, ŋkɔwo, dzesidexexlẽdzesiwo, barcodewo, dedienɔnɔ ƒe agbalẽtata kple nyatakaka siwo trɔna le dɔwɔla, sukuvi, lãmesẽnyawo gbɔ kpɔkpɔ kple dziɖuɖu ƒe dzesidegbalẽviwo dzi ta.

Mɔɖeɖe ƒe Kpekpeɖeŋugbalẽviwo

Woate ŋu azã sinima la kple mɔɖeɖegbalẽvi siwo wota siwo me RFID, NFC, magnetic stripe alo ɖaseɖigbalẽ ƒe mɔ̃ɖaŋununya bubuwo le.

Fexexe Kple Ganyawo Ŋuti Kpekpeɖeŋugbalẽviwo

Woateŋu ada PETG ƒe nutsyɔnu kpɔ hena fexexe kple ga kaɖi ƒe ɖoɖo siwo hiã nɔnɔmetata siwo me kɔ, kadodo si dzi wokpɔna kple ɖekawɔwɔ kple magnet alo chip dɔwɔwɔwo. Kaɖi si wowu enu ƒe ɖaseɖigbalẽ nana gakpɔtɔ nye kaɖi ƒe ɖoɖo si dzi woda asi ɖo ƒe agbanɔamedzi.

Ʋuɖoɖo Kple Tiketigbalẽviwo

PETG ƒe nutsyɔnu ate ŋu akpɔ mɔzɔzɔ, ʋutɔɖoƒe, sukuxɔ kple ʋuʋu ƒe agbalẽvi siwo wota siwo zãa nuxlẽmɔ̃ siwo me kadodo mele o alo magnet-nuxlẽmɔ̃wo ta.

Hamevinyenye Kple Nuteƒewɔwɔ ƒe Gbalẽviwo

Woateŋu azã glossy, matte alo specialty finishes na branded retail cards, gym cards, club cards, agbalẽdzraɖoƒe ƒe cards kple nuteƒewɔwɔ ƒe ɖoɖowo.

Amedzrodzeƒea ƒe Safuigbalẽviwo

Woate ŋu atsɔ PETG ƒe nutsyɔnu akpe ɖe magnet-ka alo RFID xɔtuɖoɖowo ŋu na amedzrodzeƒe ƒe safuigbalẽviwo le dodokpɔ kple gaƒoɖokui ƒe encoder kple nuxlẽla si woɖo be woawɔ vɔ megbe.

Smart Card siwo Wotsɔa Nu vovovowo Wɔe

Hybrid cards ateŋu aƒo PETG overlay kple contact chips, RFID inlays, NFC inlays, magnetic stripes, barcodes, QR codes kple signature panels nu ƒu le card xɔtutu ɖeka si dze me.

Alesi Nàtia PETG ƒe Nutsyɔnu Si Sɔ

1. Ðo kpe Kpekpeɖeŋugbalẽvia ƒe Dɔwɔɖoɖoa Dzi

Na nusiwo wotsɔ wɔe kple kaɖi ƒe ƒuƒoƒo ɖesiaɖe ƒe titrime, si me nu vevi siwo wota, inlay, chip, antenna, magnetic stripe kple target finished-card ƒe titrime hã le.

2. Tia Nutsyɔnu ƒe Titrime

Tia 0.04mm, 0.05mm, 0.06mm, 0.08mm, 0.10mm alo titrime bubu le ƒuƒoƒo ƒe akɔntabubu, takpɔkpɔ si hiã kple nuwuwu-kaɖi ƒe taɖodzinu nu.

3. Tia Standard alo Strong Coating

Standard coating ate ŋu asɔ na PETG xɔtuɖoɖo siwo sɔ. Ele be woada nutsyɔnu sesẽwo kpɔ hena nuŋlɔtsi sesẽwo, agbalẽtata ƒe nutsyɔnu gã alo nusiwo wotsaka ƒe ƒuƒoƒo.

4. Tsɔ Agbalẽtata ƒe Dɔwɔɖoɖoa gblɔe

Gblɔ nenye be dɔa zãa offset, UV offset, screen printing, inkjet, toner, Indigo alo dijitaal mɔnu bubu. De ink ƒe dzesi, atikewɔwɔ ƒe mɔnu kple agbalẽtata ƒe nutsyɔnu ɖe ​​eme le afisi wòanya wɔ le.

5. Tia Anyigba ƒe Nuwuwu

Tia glossy hena nukpɔkpɔ ƒe keklẽ si sɔ gbɔ wu, matte hena kekeli si dzi ɖe kpɔtɔ, frosted hena textured dzedzeme alo etɔxɛ nuwuwu na dzeside tɔxɛ kple asikaka nudidiwo.

6. Ðe Sheet alo Roll Dimensions gɔme

Tsɔ nutsyɔnu ƒe didime sɔ kple agbalẽtata ƒe nɔnɔme, ŋkɔ ŋɔŋlɔ ƒe dzesiwo, laminator ƒe agbalẽviwo, kaɖi ƒe amedzidzedze, punching dɔwɔnuwo kple ewɔwɔ ƒe kutsetse.

7. Ðo kpe Dɔwɔna ƒe Nudidiwo dzi

Gblɔ nenye be nusi wotsɔ tsyɔ edzi la bia be woawɔ agbalẽtata, laser ƒe ŋuɖoɖo, magnet-ka, nɔnɔme tɔxɛ, afu si dzi wokpɔna alo dɔwɔwɔ ƒe nɔnɔme bubuwo.

8. Do Kpɔɖeŋuwo Do Ŋgɔ Hafi Woawɔ Wo Le Agbɔsɔsɔme Me

Do nusi wotsɔ blaa nu ŋutɔŋutɔ la kpɔ kple nuƒlela ƒe nu vevi si wota, nuŋlɔtsi, laminator, asiɖeɖe le nu ŋu ƒe agbalẽvi, punching machine kple finished-card acceptance criteria.

PETG Overlay Lamination Dɔwɔwɔ

Nuwo ƒe Nɔnɔmewɔwɔ

Trɔ asi le PETG ƒe nutsyɔnu, agbalẽ siwo wota kple kaɖi ƒe ƒuƒoƒo ememetɔwo ŋu le ewɔwɔ ƒe nɔnɔme dzadzɛ me. Ele be nuwo naƒu, woanɔ gbadzaa eye ke alo ɖiƒoƒo aɖeke naganɔ wo dzi o.

Dzadzraɖo Vevi Si Wota

Na agbalẽ siwo wota la naƒu alo woahaya bliboe le nuŋlɔtsidɔwɔƒea ƒe nudidiwo nu. Residual solvent alo UV curing si mede blibo o ate ŋu aɖe kadodo ƒe dɔwɔwɔ dzi akpɔtɔ.

Coated-Side ƒe Dzesidede

De dzesi akpa si wobla ɖe wo nɔewo ŋu hafi nàƒo wo nu ƒu ɖe wo nɔewo dzi. Zi geɖe la, anyigba si dzi wofa nu ɖo la dzea ŋgɔ agbalẽvi si wota alo xɔtuɖaŋu ƒe ƒuƒoƒoa, gake akpa si wotia si wowu enu la dzea ŋgɔ gota.

Layer Stacking ƒe ƒuƒoƒo

Zã ŋkɔ ŋɔŋlɔ ƒe dzesi siwo dzi woda asi ɖo kple kaɖi ƒe ɖoɖo ƒe nɔnɔmetata nàtsɔ awɔ ŋgɔgbe nutsyɔnu, nu vevi si wota, ememe ƒuƒoƒo kple megbe nutsyɔnu la ɖe ɖoɖo nu.

Dzoxɔxɔ ƒe Lamination

Zã dzoxɔxɔ, nyaƒoɖeamenu kple dzoxɔxɔ ƒe ɣeyiɣi si sɔ na PETG ƒe dzesi tɔxɛa kple kaɖia tutu. Mègazã xexeame katã ƒe nuɖaɖa ɖeka na nuŋlɔtsi, nutsyɔnu kple kaɖi ƒe nu vevi ɖesiaɖe o.

Nyaƒoɖeamenu ƒe Fafa

Fa agbalẽvi siwo wotsɔ laminated la le nyaƒoɖeamenu si dzi wokpɔ ŋusẽ ɖo me be wòana kaɖia ƒe wɔwɔme nali ke eye wòaɖe warping, bubbles, deformation kple uneven bonding dzi akpɔtɔ.

Punching kple Dzodzro

Punch laminated sheets ɖe kaɖi siwo wowɔ vɔ me eye nàlé ŋku ɖe kaɖi ƒe didime, titrime, anyigba ƒe nyonyome, agbalẽtata ƒe dzedzeme, gbadzaƒe, nugbɔ ƒe kadodo kple dɔwɔwɔ ƒe dɔwɔwɔ ŋu.

Agbalẽtata Kple Nutsyɔtsyɔ ƒe Ðekawɔwɔ

Offset kple UV Offset ƒe Agbalẽtata

Offset kple UV offset inks ate ŋu abia be woatsɔ nu vovovowo atsyɔ wo dzi. Ele be woada gbe le agbalẽ siwo wota la ŋu bliboe, eye woado nuŋlɔtsi kpekpe si wotsɔ tsyɔ nu wo dzi la akpɔ be woƒe aŋgbawo wɔa dɔ nyuie hã.

Agbalẽtata le Screen dzi

Layer siwo wota ɖe screen dzi ate ŋu ana ink si le kpekpem wu. Woate ŋu ahiã be woatsɔ nu sesẽwo atsyɔ nu wo dzi alo woawɔ nusi wowɔ ɖe ɖoɖo nu le afisi nuŋlɔtsi ƒe ƒuƒoƒoa kpɔa ŋusẽ ɖe kadodo si le ƒuƒoƒoawo dome dzi.

Inkjet kple Digitál Agbalẽtata

Digitál kple inkjet tata ƒe ɖoɖowo zãa primer, toner, pigment kple binder vovovowo. Ele be nuƒlelawo natsɔ kpɔɖeŋu siwo wota aɖo ɖa hena bonding kple lamination evaluation.

Overlay Surface si Woate Ŋu Ata

Ne èle agbalẽ tam tẽ ɖe nusi wotsɔ tsyɔ edzi dzi la, ɖo kpe akpa si woate ŋu ata, eƒe anyigba ƒe ŋusẽ, nuŋlɔtsi ƒe ƒoƒo, dzoxɔxɔ si le dɔyɔyɔ, nɔnɔmetata ƒe nɔnɔme kple nenye be agbalẽtataa anɔ kaɖi si wotsɔ laminated la ƒe wɔwɔme me alo egodo dzi.

Dzɔdzɔmeŋutete Dzi Kpɔkpɔ Kple Dodokpɔ

Raw Film ƒe Dzodzro

• Nusiwo wotsɔ wɔe ƒe dzeside kple batch ƒe dzesidede.

• Titrime kple agbalẽ-dzidzeme dzidzedze.

• Nukpɔkpɔ le gaglãgbe, haze, gloss kple anyigba-nuwuwu ƒe ŋkuléle ɖe eŋu.

• Ke, ʋuʋudedi, flitete, pinhole kple ɖiƒoƒo me dzodzro.

• Sheet flatness kple edge-nɔnɔme me dzodzro.

Nusiwo Wotsɔna Ðea Nu Ŋu ƒe Dzodzro

• Axadzinu si wofa ɖe eŋu ƒe dzesidede.

• Nusiwo wotsɔ blaa nu ƒe ɖekawɔwɔ kple eƒe gowo ƒe dzadzɛnyenye.

• Bonding ƒe ɖekawɔwɔ kple kpɔɖeŋu siwo wota siwo dzi woda asi ɖo.

• Peel-ŋusẽ ƒe dodokpɔ le lamination megbe.

• Tsitsi kple nutome ƒe dodokpɔ le afisi wòhiã le.

Lamination ƒe Dzodzro

• Layer ƒe kadodo kple nugbɔ ƒe adhesion.

• Bubble, wrinkle kple duta-nusuewo me dzodzro.

• Anyigba ƒe nɔnɔme ƒe tɔtɔ kple amadede ƒe tɔtrɔ me dzodzro.

• Sheet shrinkage, gbadzaƒe kple didime ƒe liƒo.

• Release-plate texture kple anyigba ƒe nɔnɔmetata.

Dodokpɔ si Wowu-Kaɖi Dzi

• Finished-card ƒe didime kple eƒe titrime.

• Anyigba ƒe gome kɔ nyuie kple agbalẽtata ƒe dzedzeme.

• Card flatness, bending kple asiléle ƒe dɔwɔwɔ.

• Abrasion kple anyigbadzi-vuvu ƒe dodokpɔ.

• Edge bonding kple delamination dzro.

• Chip, RFID, NFC alo magnetic dɔwɔwɔ dodokpɔ le afisi wòsɔ le.

PETG ƒe Nutsyɔtsyɔ kple Nusiwo Li Eteƒe Didi

PETG nye nusi wotsɔ wɔa polyester si wotsɔa dzoxɔxɔ wɔe. Woate ŋu agbugbɔ nusiwo wowɔ ƒe kakɛ siwo le dzadzɛ alo PETG xɔtuɖoɖo siwo wotsɔ nu ɖeka wɔe la agbugbɔ awɔ le afisiwo nuƒoƒoƒu, dzesidede kple dɔwɔwɔ ƒe dɔwɔƒe siwo sɔ le.

Alesi woate ŋu agbugbɔ agbalẽvi si wowɔ vɔ la awɔ dɔe la sesẽ wu elabena nuŋlɔtsi, nusiwo wotsɔ blaa nu, nusiwo léna ɖe nu ŋu, magnet-ka, chips, antenna, hologram kple polymer siwo wotsaka ate ŋu anɔ kaɖia me. Ele be nuƒlelawo nalé ŋku ɖe kaɖi ƒe ɖoɖo bliboa kple nutoa me ƒe nusiwo wogbugbɔ zãna ƒe xɔtuɖoɖowo ŋu hafi agblɔ nutome ƒe nyawo.

Mele be woagblɔ be PETG si wozãna ɖaa la ate ŋu agblẽ nu le nugbagbewo ŋu o negbe ɖe nusiwo wotsɔ wɔe ƒe hatsotso aɖe koŋ si ŋu woɖo kpee kple nɔnɔme siwo ŋu woɖo kpee be woatsɔ aƒu gbe ɖo kpe nya ma dzi hafi.

Nusiwo woawɔ le nusiwo li tegbee ƒe ŋgɔyiyi ate ŋu anye nuwo ƒe titrime si mehiã o dzi ɖeɖe kpɔtɔ, nu ɖeka ƒe xɔtunu siwo sɔ zazã, dɔwɔƒewo ƒe kakɛ dzadzɛwo gbugbɔgawɔ, nuwɔwɔ ƒe gbɔdzɔgbɔdzɔwo dzi ɖeɖe kpɔtɔ kple nubablɛ siwo ŋu agbanɔamedzi le tiatia.

Wallis PETG Overlay ƒe Nuwɔwɔ

Wallis doa alɔ PETG ƒe nutsyɔnu wɔwɔ si wowɔ ɖe ɖoɖo nu na kpɔɖeŋuwo, dodokpɔ ƒe nudɔdɔwo, ɖoɖowɔɖi gbogbotɔ ƒe nudɔdɔwo kple ɣeyiɣi didi ƒe kaɖi-nuzazãwo nana ƒe ɖoɖowo.

Nuwɔwɔ ƒe ɖoɖowɔwɔ ateŋu anye nusiwo wotsɔ wɔa nu xoxowo dzi kpɔkpɔ, film ƒe dɔwɔwɔ, nutsyɔtsyɔ, anyigba dzi dɔwɔwɔ, ʋuʋudedi, agbalẽwo ɖeɖe, didime me toto, ametakpɔnu bablawo, lot ƒe dzesidede kple nusiwo wotsɔ yi duta ŋuti nuŋlɔɖiwo.

Nubablɛ, Nudzraɖoƒe kple Xexeame Katã ƒe Nudɔdɔ

Ele be woakpɔ PETG ƒe nutsyɔnu ta tso ke, tsidzadza, ƒoƒo, asibidɛ ƒe dzesiwo, bɔbɔ, nyaƒoɖeamenu sesẽ, dzoxɔxɔ si dzi womeɖu o kple ɣe ƒe keklẽ tẽ me le edzadzraɖo kple etsɔtsɔ yi teƒe bubuwo me.

• Klɔ PE film alo ametakpɔnu ememetɔ.

• Kraft-pepa alo kotoku siwo wotu nu ɖo siwo me tsi mate ŋu age ɖo o.

• Kakɛ gbadzawo, aɖaka siwo ŋu wodo ŋusẽe, atikpowo alo palletwo.

• Dzogoe kple nugbɔ takpɔkpɔ be woaɖe deformation dzi akpɔtɔ.

• Nudzraɖoƒe le tsia dzi be woalé agbalẽa ƒe gbadzaƒe ɖe te.

• Nusi wotsɔ wɔe, eƒe titrime, nusi wotsɔ blae ƒe akpa, eƒe anyigba kple batch ƒe dzesiwo.

• OEM ƒe dzeside siwo wowɔ ɖe ɖoɖo nu, agbalẽɖoɖoɖa ƒe dzesiwo kple nubablɛwo ƒe xexlẽdzesiwo.

Dzra nusi wotre ɖe eƒe nubablɛ gbãtɔ me ɖo ɖe teƒe si le dzadzɛ, si ƒu eye woate ŋu akpɔ dzoxɔxɔ dzi. Ƒo asa na nusiwo wotsɔ ƒo ƒu ɖe wo nɔewo dzi vevie eye nàna nusiwo wowɔ le nɔnɔme nyui me naɖo xɔ si me wowɔa nu le ƒe nɔnɔme me hafi nàʋu le afisi tsi ƒe ƒoƒo ate ŋu anye nusi ŋu nàtsi dzi ɖo le.

Nukatae Nàtia Wallis be wòanye Wò PETG Overlay Dɔwɔƒe?

Wallis naa film si wotsɔ tsyɔa nu dzi kple kaɖi siwo do ƒome kplii kaɖi wɔlawo, smart card dɔwɔƒewo, RFID tɔtrɔlawo, dedienɔnɔ ƒe agbalẽtamɔ̃wo, ame ŋutɔ ƒe nɔnɔmetata dɔwɔƒewo, mamalawo kple OEM asisiwo.

• PETG si wofa, sesẽ si wofa kple esi womefa o ƒe nutsyɔnu tiatia.

• Trɔ asi le eƒe titrime, agbalẽ ƒe lolome, agbalẽ xatsaxatsa ƒe lolome kple anyigba ƒe nuwuwu.

• Agbalẽtata-dɔdamɔnu, magnet-ka kple dɔwɔwɔ ƒe tiatia tɔxɛwo.

• Kpɔɖeŋu kpekpeɖeŋu na ink, coating kple lamination ƒe ɖekawɔwɔ.

• Dzɔdzɔmeŋutete me dzodzro, batch ƒe dzesidede kple nubablɛ siwo wowɔ ɖe ɖoɖo nu.

• PETG nu vevi, PET agbalẽ, PVC, PC kple RFID inlay nu siwo do ƒome kplii.

• OEM ƒe dzesidede kple dukɔwo dome nusiwo wotsɔ ɖoa ​​duta ƒe kpekpeɖeŋu.

Nya Siwo Wobia Enuenu

Nukae wozãna na PETG ƒe nutsyɔnu?

Wozãa PETG ƒe nutsyɔnu abe ŋgɔgbe alo megbe takpɔnu si me kɔ ene le aŋekaɖi siwo wotsɔ lãgbalẽ wɔe me. Ekpɔa nyatakaka siwo wota ta eye wòkpena ɖe wo ŋu woblaa kaɖi ƒe ƒuƒoƒoawo le dzoxɔxɔ ƒe lamination me.

PETG ƒe nutsyɔnu ƒe titrime kawoe li?

Wallis naa PETG ƒe nutsyɔnu tso abe 0.04mm va ɖo 0.15mm ene. Tiatia siwo bɔ dometɔ aɖewoe nye 0.05mm, 0.06mm, 0.08mm kple 0.10mm, kple titrime si wowɔ ɖe ɖoɖo nu le dɔa ƒe nudidiwo nu.

Vovototo kae le PETG ƒe nutsyɔnu si wofa kple esi womefa o dome?

Nusi wotsɔ blaa nu si wotsɔ blaa nu si wowɔ be wòalé ɖe kaɖi ƒe nuto si wota si sɔ ŋu le lamination me. Film si womefa o ɖoa ŋu ɖe kaɖia ƒe wɔwɔme alo kadodomɔnu si le vovo ŋu be wòana wòalé ɖe nu ŋu.

Ɣekaɣie wòle be woazã nu sesẽ si wotsɔ nu tsyɔ nu edzi?

Ele be woada nutsyɔnu sesẽ si wotsɔ tsyɔ nu dzi la akpɔ be nuŋlɔtsi ƒe nutsyɔnu lolo, dijitaal ink sesẽwo, nu vovovowo ƒe kaɖi ƒe xɔtuɖoɖowo alo dɔ siwo meɖoa lãgbalẽ ƒe ŋusẽ si sɔ gbɔ kple nutsyɔnu si wozãna ɖaa o hã.

Ðe woate ŋu azã PETG ƒe nutsyɔnu kple PVC alo PET kaɖi ƒe nu veviwoa?

Woateŋu azãe le PVC, PET kple xɔtuɖoɖo tiatia aɖewo me ne nusiwo wotsɔ blae, ink, dzoxɔxɔ ƒe nɔnɔmewo, shrinkage kple lamination nɔnɔmewo sɔ. Ele be woado kpɔɖeŋuwo kpɔ hafi woawɔ wo le agbɔsɔsɔ gã me.

Ðe woate ŋu atsɔ PETG ƒe nutsyɔnu ana le agbalẽwo kple agbalẽ xatsaxatsawo mea?

Ɛ̃. Woate ŋu atsɔ PETG ƒe nutsyɔnu ana le A4, A3 alo agbalẽ siwo wowɔ ɖe ɖoɖo nu, slit formats kple rolls me, le nusi wotsɔ wɔe ƒe grade, titrime, kekeme kple nudɔdɔ ƒe agbɔsɔsɔme nu.

Nusiwo wotsɔna wua anyigba ƒe akpa kawoe li?

Tiatia siwo li ate ŋu anye esiwo le gbadzaa siwo le keklẽm, esiwo me mekɔ o, esiwo me tsikpe le, esiwo me keklẽ mele o, esiwo ƒe nɔnɔme le abe nɔnɔme ene kple esiwo wowɔ ɖe ɖoɖo nu. Mlɔeba ƒe anyinɔnɔ nɔ te ɖe eƒe titrime, ewɔwɔ ƒe ɖoɖo kple agbɔsɔsɔ dzi.

Ðe PETG ƒe nutsyɔnu te ŋu léna ɖe eɖokui ŋua?

Zi geɖe la, womezãa standard card-lamination PETG overlay abe nyaƒoɖeamenu-sensitive sticker ene o. Wowɔa eƒe nutsyɔnu ŋudɔ eye wòblanɛ to dzoxɔxɔ kple nyaƒoɖeamenu ƒe lamination ƒe mɔnu si dze dzi.

Dzoxɔxɔ kae wozãna tsɔ ƒoa PETG ƒe nutsyɔnu la?

Dzoxɔxɔ si hiã la nɔ te ɖe PETG ƒe dzesi, nusi wotsɔ blae, nuŋlɔtsi, nu vevi, nyaƒoɖeamenu, dzoxɔxɔ ƒe ɣeyiɣi kple dɔwɔnuwo dzi. Zã mɔ̃ɖaŋu ŋuti nyatakaka gbalẽvi si ku ɖe dzeside tɔxɛwo ŋu eye nàtsɔ kpɔɖeŋuwo aɖo kpe ɖoɖoa dzi tsɔ wu be nàɖo ŋu ɖe xexeame katã ƒe dzoxɔxɔ ɖeka ŋu.

Agbalẽtatamɔnu kawoe sɔ kple PETG ƒe nutsyɔnu?

Offset, UV offset, screen, inkjet kple digital printing ateŋu adzɔ ne wotsɔ anyigba alo nusi sɔ. Ele be woadoe kpɔ be esɔ kple ink, primer kple curing ƒe mɔnu si sɔ pɛpɛpɛ.

Ðe PETG ƒe nutsyɔnu ate ŋu anye magnet-ka?

Ɛ̃. HiCo alo LoCo magnetic stripe overlay ateŋu atrɔ asi le eŋu kple coercivity, kekeme, teƒe, mɔfiame kple amadede si hiã. Ele be woatsɔ encoder kple reader si woɖo be woatsɔ ado agbalẽvi si wowɔ vɔ la kpɔ.

Ðe woate ŋu azã PETG ƒe nutsyɔnu kple RFID kple NFC kaɖiwoa?

Ɛ̃. PETG ƒe nutsyɔnu ate ŋu awɔ RFID kple NFC kaɖiwo ƒe gotagome ƒuƒoƒo si kpɔa ame ta. Ele be woado kaɖi ƒe wɔwɔme bliboa kpɔ be eƒe titrime, kadodo, gbadzaa, chip takpɔkpɔ kple antenna ƒe dɔwɔwɔ hã.

Ðe PETG ƒe nutsyɔnu sɔ na gota zazãa?

Gbedoxɔ me dzedze nɔ te ɖe PETG ƒe dzeside tututu, UV ƒe liƒo, nuŋlɔtsi, nusi wotsɔ blae, dzoxɔxɔ ƒe didime, tsi ƒe dodo kple subɔsubɔ ƒe agbenɔƒe si wokpɔ mɔ na dzi. Mele be woaɖɔ kaɖi si wotsɔ tsyɔa nu dzi si wozãna ɖaa le eɖokui si be enye gota gome ƒe dzesi o.

Ðe PETG ƒe nutsyɔnu te ŋu nɔa te ɖe atikewo nua?

PETG ate ŋu anɔ te ɖe atike aɖewo siwo wozãna edziedzi nu, gake eƒe dɔwɔwɔ toa vovo le eƒe kpekpeme, eƒe agbɔsɔsɔme, ɣeyiɣi si wòka ɖe eŋu, dzoxɔxɔ kple mɔ̃wo ƒe nuteɖeamedzi nu. Do nusi wotsɔ wɔe la kpɔ kple atike ƒe nɔnɔme ŋutɔŋutɔ.

Ðe woate ŋu agbugbɔ PETG ƒe nutsyɔnu awɔ dɔa?

Woate ŋu agbugbɔ PETG-nu dzadzɛwo azã le afisiwo nuƒoƒoƒu kple wo ŋudɔwɔwɔ ƒe ɖoɖo siwo sɔ le. Finished-card recyclability nɔ te ɖe nusiwo katã wotsɔ blae, ink, adhesives, chips, antennas, magnetic stripes kple nusiwo wotsaka dzi.

Ðe PETG dzrowo te ŋu gblẽna le nugbagbeviwo ŋua?

Mele be woabu PETG si wozãna ɖaa be enye nusi gblẽna le nugbagbewo ŋu o. Nu gbagbewo ƒe gbegblẽ ƒe nyagbɔgblɔ bia be woatsɔ nusiwo wotsɔ ƒu gbe ƒe dzesi tɔxɛ aɖe si ŋu woɖo kpee, nɔnɔme siwo me woɖe nu le tsɔ ƒu gbe kple dodokpɔ ŋuti nuŋlɔɖi siwo ɖo kpe edzi.

Ðe mate ŋu ado PETG ƒe nutsyɔnu ƒe kpɔɖeŋuwo kpɔ hafi abia?

Ɛ̃. Wokafu kpɔɖeŋu dodokpɔ be woatsɔ akpɔe ɖa be agbalẽtata ƒe ɖekawɔwɔ, nusi wotsɔ blae, lamination ƒe nɔnɔmewo, lãgbalẽ ƒe ŋusẽ, eƒe go ƒe dzedzeme, shrinkage, flatness kple finished-card ƒe dɔwɔwɔ.

Nyatakaka kawoe hiã na nyayɔyɔ?

Taflatse na eƒe titrime, agbalẽ alo agbalẽ xatsaxatsa ƒe lolome, anyigba ƒe nuwuwu, nusi wotsɔ blae si sɔ alo sesẽ, kaɖi-nu vevi, agbalẽtata mɔnu, nuŋlɔtsi ƒomevi, kaɖi zazã, agbɔsɔsɔme si wobu, nubablɛwo kple teƒe si woatsɔe ayi.