|
WLS-INKJET ƑE AGBALẼ
WALLIS ƒe ŋkɔ
| Amadede: | |
|---|---|
| Agbɔsɔsɔ: | |
| Titrime : | |
| Anyigba: | |
| Agbɔsɔsɔ: | |
Wallis PETG coated overlay sheet lamination film nye ametakpɔnu si me kɔ si woto vɛ na dɔwɔƒewo ƒe plastic card wɔwɔ. Wotsɔa laminated ɖe kaɖi si wota ƒe nuto dzi be wòakpɔ nɔnɔmetatawo kple ame ŋutɔ ƒe nyatakakawo ta esime wòle kadodoa ƒe liƒo, abrasion tsitretsitsi, atikewo ƒe tsitretsitsi, kple kaɖia ƒe anyigba si wowu enu la nyom ɖe edzi.
Wotrɔ asi le nyatakakaawo ŋu na ID-gbalẽvi wɔlawo, smart card dɔwɔƒewo, fexexe ƒe agbalẽvi wɔlawo, mɔɖeɖe ƒe agbalẽvi dzralawo, agbalẽvi tata dɔwɔƒewo, ame ŋutɔ ƒe dɔwɔwɔ ŋuti dɔwɔƒewo, kple kaɖi ƒe nuzazãwo mamalawo . Titrime siwo woɖo ɖi kple esiwo wowɔ ɖe ɖoɖo nu, agbalẽ ƒe lolome, nutsyɔnu ƒe ɖoɖowo, anyigba ƒe nuwuwu, kple magnet-ka ƒe ɖoɖowo li na kaɖi ƒe xɔtuɖoɖo vovovowo.
Nukpɔkpɔ ƒe eme kɔ nyuie na nɔnɔmetata siwo wota, nuŋɔŋlɔ, barcode, logo, kple dedienɔnɔ ƒe nɔnɔmetatawo.
Coated anyigba si wowɔ na kadodo si ŋu kakaɖedzi le le kaɖi lamination.
Woate ŋu awɔe na PVC, PET, PETG, kple kaɖi siwo wotsɔ ƒo ƒui ƒe xɔtutu siwo sɔ.
Gloss, matte, frosted, anti-scratch, laserable, kple magnetic fli tiatia.
Trɔ asi le agbalẽa ƒe didime kple titrime ŋu na ewɔwɔ-fli ƒe nudidiwo.
Bia be woawɔ PETG Overlay Sample
| Nu si wowɔ | PETG si wofa nutsyɔnu gbalẽvi kple lamination film na plastik kaɖiwo |
| Dɔwɔwɔ Gbãtɔ | Ekpɔa kaɖi si wota ƒe nuto ta eye wòdoa alɔ layer bonding si li ke le lamination me |
| Nuƒlela Gbãtɔwo | Kpekpeɖeŋudɔwɔƒewo, nuŋlɔɖiwɔƒe siwo le dedie, agbalẽtaƒe, dɔwɔƒe siwo trɔa asi le ame ŋutɔ ƒe nyawo ŋu, kple agbalẽmamãlawo |
| Dɔwɔwɔ Siwo Wozãna Zi geɖe | ID-gbalẽviwo, mɔɖeɖegbalẽviwo, fexexegbalẽviwo, mɔzɔzɔ ƒe agbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo, nuteƒewɔwɔgbalẽviwo, kple smart cardwo |
| Trɔ asi le eŋu | Titrime, didime, nutsyɔnu ƒe ŋusẽ, nuwuwu, laserable layer, kple magnetic stripe ƒe ɖoɖo |
| Parameter | Available Specification |
|---|---|
| Nu | PETG |
| Amadede | Si me kɔ; tiatia bubu siwo le dɔa ƒe nudidiwo nu |
| Eƒe titrime | 0.04-0.15 mm ƒe didime si woɖo ɖi; bubu siwo wowɔ ɖe ɖoɖo nu ƒe titrime siwo li le mɔ̃ɖaŋununya ƒe kpeɖodzi megbe |
| Agbalẽvi ƒe Agbɔsɔsɔme | A4, A3, kple kaɖi-wɔwɔ ƒe ɖoɖo siwo wowɔ ɖe ɖoɖo nu |
| Nusiwo Wotsɔ Naa Nu ƒe Nɔnɔme | Lã agbalẽwo alo ɖoɖo si wowɔ ɖe ɖoɖo nu le nudɔdɔ ƒe nudidiwo nu |
| Anyigbadzi Nuwuwu | Gloss, matte, smooth, frosted, anti-scratch, velvet, alo esi wowɔ ɖe ɖoɖo nu |
| Kpɔɖeŋu Siwo Wotsɔ Kpe Ðe Nu Ŋu | Nutsyɔnu si wofa, nutsyɔnu sesẽ si wotsɔ nutsyɔnu, nutsyɔnu si woate ŋu atsɔ laser, kple nutsyɔnu si wotsɔ magnet tsyɔ |
| Magnetic Stripe ƒe Tiatiawɔblɔɖe | HiCo, LoCo, 300 Oe, 600 Oe, 2750 Oe, kple 3000 Oe, le kaɖi ƒe nɔnɔme nu |
| Kpekpeɖeŋugbalẽvi Siwo Sɔ Kple Wo Nɔewo | PETG kple PVC, PET, alo kaɖi ƒe xɔtuɖoɖo siwo sɔ le kpɔɖeŋu dodokpɔ megbe |
| Nɔnɔme Veviwo | Nukpɔkpɔ me kɔ, nutsyɔnu ƒe adhesion, abrasion tsitretsitsi, tsi ƒe tsitretsitsi, atikewo ƒe tsitretsitsi, kple didime ƒe liƒo |
| Kpɔɖeŋu Dodokpɔ | Wokafui hafi woawɔe le agbɔsɔsɔ gã me be woatsɔ aɖo kpe kaɖi ƒe wɔwɔme bliboa kple lamination fesre dzi |
PETG ƒe nutsyɔnu si me kɔ la ɖea mɔ be nɔnɔmetata siwo wota, nuŋɔŋlɔ, dzesidenuwo, barcode, nɔnɔmetata nyuiwo, kple dedienɔnɔ ƒe akpawo nɔa dzedzem le lamination megbe. Nukpɔkpɔ ƒe nyonyome si nɔa anyi ɖaa le vevie ŋutɔ na dzesidede, ganyawo, kple adzɔnu ƒe dzesidegbalẽvi ƒe ɖoɖowo afisi nuxexlẽ kple eƒe gota gome ƒe dzedzeme kpɔa ŋusẽ ɖe agbalẽvi si wowɔ vɔ dzi xɔxɔ dzi le.
Wotrɔ asi le anyigba si dzi wofa nu ɖo ŋu be wòabla kple nu vevi si wota si sɔ le dzoxɔxɔ kple nyaƒoɖeamenu si dzi wokpɔna me. Nusiwo wotsɔ sɔ kple wo nɔewo nyuie kpena ɖe ame ŋu be woaɖe delamination, ya si xaxa, anyigba ƒe nɔnɔme madeamedzi, nugbɔ kɔkɔ, eƒe tɔtrɔ, kple amadede ƒe tɔtrɔ dzi akpɔtɔ. Ele be woaɖo ɖoɖo mamlɛawo to dodokpɔ siwo me woazã asisi la ƒe nuŋlɔtsi ƒe ɖoɖo, nu veviwo, laminator, gakpo ƒe agbalẽviwo, pads, nyaƒoɖeamenu, dzoxɔxɔ, kple ɣeyiɣi si woatsɔ anɔ anyi.
Ne wonya ƒo PETG ƒe nutsyɔnu la ko la, ewɔa kaɖia ƒe gotagome ametakpɔnu. Ekpena ɖe ame ŋu be woakpɔ nyatakaka siwo wota ta tso ʋuʋudedi, asibidɛ ƒe dzesiwo, tsidzadza, atike siwo bɔ, kple wo zazã enuenu me, si doa alɔ woƒe dɔwɔwɔ didi wu eye kaɖia ƒe dzedzeme nɔa anyi ɖaa wu.
Nusiwo dzi wokpɔna le titrime, gbadzaƒe, anyigba siwo le dzadzɛ, kple didime siwo li ke le vevie na ŋkɔ ŋɔŋlɔ kple wo gbugbɔgawɔ le kaɖi siwo wotsɔa ƒuƒoƒo geɖe tutu me. Le dɔ gbogbowo wɔwɔ gome la, ele be nuƒlelawo naɖo kpe alesi woate ŋu alɔ̃ ɖe eƒe titrime dzi, agbalẽa ƒe dzogoe ene me, eƒe anyigba ƒe dzadzɛnyenye, eƒe ʋuʋu ƒe nuwɔna, kple eƒe ƒuƒoƒo ɖe hatsotso ɖeka me ƒe ɖekawɔwɔ dzi le nɔnɔme si dzi woda asi ɖo me.
Wallis ateŋu ana overlay version vovovowo na nukpɔkpɔ, asikaka, dedienɔnɔ, kple encoding ƒe nudidiwo. Tiatia aɖewoe nye gloss si me kɔ, matte, frosted, anti-scratch, velvet, laserable, coated sesẽ, kple magnetic stripe overlays. Nusiwo li nɔ te ɖe eƒe titrime, lolome, nudɔdɔ ƒe agbɔsɔsɔme, kple kaɖi ƒe wɔwɔme si hiã dzi.
Kpekpeɖeŋugbalẽvi si wozãna ɖaa si wotsɔa lãgbalẽ wɔe zãa nusi wotsɔ tsyɔa gotagome eveawo dzi, eye wotsɔa nu veviwo ƒe agbalẽ siwo wota kple nusi wotsɔ blaa nu alo nusi wɔa dɔ ɖesiaɖe nɔa wo dome. Xɔtutu tututu nɔ te ɖe taɖodzinu kaɖia ƒe titrime, chip alo antenna ƒe wɔwɔme, magnet-kaɖi, ame ŋutɔ ƒe nɔnɔme, kple alesi wòhiã be wòanɔ anyi eteƒe nadidi dzi.
Top PETG overlay: kpɔa ŋgɔgbe tata ta eye wònaa anyigba ƒe akpa si nètia la ƒe nuwuwu.
Printed core layer: tsɔa nɔnɔmetatawo, nuŋɔŋlɔwo, dzesiwo, nyatakaka siwo trɔna, kple dedienɔnɔ ŋuti nutatawo.
Inlay alo functional layer si woate ŋu atia: ate ŋu anye RFID antenna, chip module support, alo card mɔ̃ɖaŋununya bubu.
Printed back core layer: nɔnɔmetata siwo le megbe, mɔfiamewo, asidede agbalẽ te, alo dzesidewo le eme.
Bottom PETG overlay: kpɔa megbe gome ta eye wòwua laminated kaɖi ƒe ŋutilã nu.
Be woate ŋu awɔ nusiwo ŋu kakaɖedzi le la, ele be woabu akɔnta le ƒuƒoƒoa ƒe titrime bliboa ŋu hafi adɔ nu. Ele be asisiwo nado stack bliboa kpɔ tsɔ wu be woada nusi wotsɔ blae la ɖeɖeko kpɔ.
| PETG | Overlay | PVC Overlay | PC Overlay |
|---|---|---|---|
| Ðoƒe Siwo Woɖona Ðe Ðokuisi Siwo Wozãna | Nusiwo me kɔ, sesẽme, kple lamination ƒe dɔwɔwɔ si da sɔ | Nusiwo mexɔ asi o na plastik-kaɖi siwo wozãna ɖaa | Nu nyuitɔ kekeake na kaɖi siwo nɔa anyi didina ŋutɔ eye wole dedie ŋutɔ |
| Dɔwɔwɔ Siwo Wozãna Zi geɖe | ID, smart, fexexe, mɔɖeɖe, mɔzɔzɔ, kple hamevinyenye ƒe agbalẽviwo | Nunana, nuteƒewɔwɔ, hamevinyenye, boblododo, kple ID-gbalẽvi siwo wozãna le mɔ gbadza nu | Dziɖuɖu ƒe ID, ʋukugbalẽvi, mɔzɔgbalẽ ŋuti nyatakakawo ƒe axa, kple ɖaseɖigbalẽ siwo le dedie |
| Dɔwɔwɔ Ŋuti Nusrɔ̃ƒe | Layer bonding sesẽ kple card cores siwo sɔ | Woɖo dɔwɔwɔ kple dɔwɔnuwo ƒe sidzedze gbadzaa anyi | Dzoxɔxɔ si kɔkɔ wu ƒe dɔwɔwɔ kple laser engraving ŋutete |
| Tiatia Nyuitɔ Kekeake Ɣekaɣi | Dɔa hiã xɔtutu si wotu ɖe PETG dzi si nɔa anyi didina alo si sɔ kple wo nɔewo | Gazazã kple kaɖiwo wɔwɔ le mɔ si bɔ nue nye nu vevitɔ | Wobia be woawɔ dɔ ƒe agbenɔƒe si sɔ gbɔ wu, dzoxɔxɔ ƒe tsitretsitsi, alo dedienɔnɔ deŋgɔ |
Ele be woanɔ te ɖe kaɖia tutu bliboa dzi, subɔsubɔ ƒe nɔnɔme si wokpɔ mɔ na, mɔ̃ɖaŋununya si atrɔ asi le ame ŋutɔ ŋu, sedziwɔwɔ ƒe nudidiwo, dɔwɔnuwo, kple dɔa ƒe gazazã dzi. Wallis ate ŋu ana kpɔɖeŋuwo hena lamination dodokpɔ tsɔtsɔ sɔ kple wo nɔewo.
PETG ƒe nutsyɔnu kpɔa nɔnɔmetatawo, nuŋɔŋlɔ siwo wota, barcode, QR code, asidede agbalẽ te, kple dedienɔnɔ ƒe nɔnɔmetata siwo wozãna le dɔwɔƒewo kple dzesidegbalẽviwo dzi ta. Woate ŋu ada laserable alo specialty versions kpɔ ne dɔa bia be woawɔ ame ŋutɔ ƒe dɔwɔwɔ bubuwo.
Kpekpeɖeŋugbalẽvi siwo wotsɔna ɖe asi hewɔa nu ɖe wo ŋu enuenu la hiãa anyigba dzadzɛ kple xɔtunu si wotsɔ lãgbalẽ wɔe si li ke. Woate ŋu atrɔ asi le PETG ƒe nutsyɔnu si wofa nu ŋu na gagbalẽvi siwo wota eye woatsɔe akpe ɖe magnet-ka ƒe tiatia si sɔ ŋu ne ehiã.
Woate ŋu azã PETG ƒe nutsyɔnu le kaɖi ƒe xɔtuɖoɖo siwo me RFID ƒe nutrenu alo akpa siwo do ƒome kple chip le me. Kpɔɖeŋu dodokpɔ le vevie be woatsɔ aɖo kpe kadodo, antenna takpɔkpɔ, gbadzaƒe mamlɛtɔ, punching ƒe nyonyome, kple chip-module ƒe ɖekawɔwɔ dzi.
Le asitsatsa ƒe kaɖi ƒe ɖoɖo siwo ƒe lolome lolo gome la, PETG ƒe nutsyɔnu kpena ɖe ame ŋu be woakpɔ adzɔnu ƒe dzeside si wota kple nyatakaka siwo wozãna gbesiagbe ta. Gloss, matte, frosted, alo tactile finishes ate ŋu ado alɔ nukpɔkpɔ kple asiléle ƒe nudidi vovovowo.
| Overlay Ƒomevi | Zazã si Wokafu |
|---|---|
| Clear Coated Overlay | Ametakpɔkpɔ si me kɔ le goawo katã me na kaɖi siwo wota ƒe anyigba |
| Sesẽ si Wofa Ðe Nu Ŋu | Dɔ siwo bia be woawɔ kadodo si nyo wu kple nu vevi si wota si sɔ |
| Laserable ƒe Nutsyɔnu | Kpekpeɖeŋunaɖoɖo siwo hiã be woade dzesi laser alo ame ŋutɔ ƒe tɔtrɔ si wotu ɖe laser dzi le kpeɖodzinana megbe |
| Matte alo Frosted ƒe Nutsyɔnu | Anyigba siwo dzi womeklẽna le o kple nukpɔkpɔ ƒe nukpɔkpɔ nyuitɔ kekeake |
| Anti-Scratch ƒe Nutsyɔnu | Kpekpeɖeŋugbalẽvi siwo ŋu wowɔa dɔ le enuenu siwo hiã be woakpɔ wo ta geɖe wu le woƒe gota |
| Magnetic Stripe ƒe Nutsyɔtsyɔ | HiCo alo LoCo magnetic card wɔwɔ kple fli ƒe nɔƒe si wogblɔ kple dzizizi |
Dzro Wò Kpekpeɖeŋugbalẽvi Xɔtutu Me
Be Wallis nakafu PETG ƒe nutsyɔnu si sɔ la, edaa nutsyɔnu la kpɔna kpe ɖe nuƒlela ƒe nu vevi si wota, kaɖi ƒe wɔwɔme, dɔwɔnuwo, kple ame ŋutɔ ƒe tɔtrɔ ƒe ɖoɖo ŋu. Mɔ̃ɖaŋu ŋuti nyatakaka siwo me kɔ ɖea kpɔɖeŋuwo xɔxɔ ƒe tsatsam dzi kpɔtɔna eye wòkpena ɖe ame ŋu be woaxe mɔ ɖe nuwo ƒe masɔmasɔ nu le ewɔwɔ le agbɔsɔsɔ gã me.
Nusi wobia be woatsɔ atsyɔ nu dzi ƒe titrime, agbalẽa ƒe lolome, kple nudɔdɔ ƒe agbɔsɔsɔme si wobu.
Kpekpeɖeŋugbalẽvi ƒe nu veviwo kple ƒuƒoƒo ɖesiaɖe si le kaɖia ƒe wɔwɔme me ƒe titrime.
Agbalẽtata ƒe mɔnu kple ink ƒomevi, si me UV, offset, screen, alo digital processes hã le.
Lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi, agbalẽviwo, kple pad ƒe ɖoɖo.
Nusi hiã be woawu enu: gloss, matte, frosted, anti-scratch, velvet, alo nusi wowɔ ɖe ɖoɖo nu.
Ame ŋutɔ ƒe nɔnɔme abe laser dzesidede, embossing, magnetic encoding, alo chip embedding.
Taɖodzinu ƒe dɔwɔwɔ, subɔsubɔ ƒe nɔnɔme, dodokpɔ ƒe nudidiwo, kple teƒe si woɖoe ɖo.
Ðo kpe mɔ̃ɖaŋununya ƒe nɔnɔmetata kple kaɖi-layer xɔtutu dzi.
Do teƒenɔla PETG tsyɔ kpɔɖeŋuwo kple nu vevi ŋutɔŋutɔ kple ink ɖoɖoa.
Lé ŋku ɖe eƒe lãgbalẽ ƒe ŋusẽ, eƒe gbadzaƒe, eƒe dzedzeme, eƒe gogloƒe ƒe nuwuwu, eƒe atamkaka, kple eƒe ame ŋutɔ ƒe dɔwɔwɔ ŋu.
Da asi ɖe nufiame kpɔɖeŋu kple nuŋlɔɖi si woŋlɔ ɖi dzi hafi woawɔe le agbɔsɔsɔ gã me.
Zã nuwɔwɔ ƒe nɔnɔme siwo dzi woda asi ɖo hena vava kple batch-quality control.
Ele be PETG ƒe nutsyɔnu ƒe anyigbawo nanɔ dzadzɛ eye woanɔ gbadzaa hafi woawɔ lamination. Wallis zãa ametakpɔnu siwo wotsɔ ɖoa duta siwo ŋu wotrɔ asi le be woaɖe ke, tsidzadza, ƒoƒo, nugbɔ ƒe gbegblẽ, anyigba ƒe ʋuʋu, kple ʋuʋu dzi akpɔtɔ le dukɔwo dome ʋuɖoɖo me. Woate ŋu atrɔ asi le nubablɛwo ƒe ɖoɖowɔwɔ ŋu wòasɔ ɖe agbalẽa ƒe lolome, agbɔsɔsɔ, pallet ƒe nudidiwo, kple mɔnu si wotsɔ ɖoa woe nu.
Ametakpɔnu ƒe Nugoewo ƒe Agbatsɔtsɔ
Export Packaging kple Shipping
Wallis naa plastic card nuzazãwo B2B asisiwo siwo hiã na wo enuenu, woatrɔ asi le wo ŋu, kpɔɖeŋu ƒe kpekpeɖeŋu, kple mɔ̃ɖaŋununya ƒe ɖoɖowɔwɔ. Nuƒlelawo ate ŋu akpɔ PETG ƒe nutsyɔnu ɖekae kple core sheets siwo sɔ, magnetic stripe materials, inlays, kple card-production components bubuwo to nudzrala ɖeka dzi.
Ƒe 15 kple edzivɔ ƒe nuteƒekpɔkpɔ le adzɔnuwo wɔwɔ kple wo ɖoɖo ɖe duta me.
Dɔwɔƒe adre siwo doa alɔ plastic sheet kple film ƒe adzɔnuwo ƒe hatsotso geɖe.
Woka nya ta be ɣleti sia ɣleti ƒe nuzazã ƒe ŋutete si ade tɔn 8,000 le adzɔnuwo ƒe hatsotsowo katã me.
Nusiwo wowɔ ɖe ɖoɖo nu ƒe titrime, didime, nusiwo wotsɔ blae ɖe edzi, nusiwo wotsɔ wu enu, kple kaɖi-nu siwo wotsɔ ƒo ƒui.
Kpɔɖeŋu kpekpeɖeŋu na lamination kple ame ŋutɔ ƒe dodokpɔ hafi bulk nudɔdɔwo.
Mɔ̃ɖaŋununya ƒe ŋuɖoɖo kple teƒe ɖeka ƒe kaɖi ƒe nuzazãwo ƒe ɖoɖowɔwɔ na dukɔwo dome nuƒlelawo.
Dɔnyala ƒe Kpekpeɖeŋunaha
Xexeame Katã ƒe B2B Asitsalawo
Kpekpeɖeŋugbalẽviwo ƒe Nuwo wɔwɔ
Wotsɔa nutsyɔnu si wotsɔ PETG fa la ƒoa nu ɖe kaɖi ƒe nuto si wota ƒe gota gome. Ekpɔa nɔnɔmetata siwo wota kple nyatakaka siwo trɔna ta, enaa wowua anyigba mamlɛtɔ nu, eye wòkpena ɖe ame ŋu be woawɔ kaɖi ƒe xɔtuɖoɖo si me wotsɔa ƒuƒoƒo geɖe blanae.
Dzesi si woŋlɔ ɖi ƒe didime nye 0.04-0.15 mm. Woate ŋu awɔ titrime bubuwo le kaɖia ƒe wɔwɔme, kaɖi si wowɔ vɔ ƒe titrime bliboa, eƒe nɔnɔme, agbɔsɔsɔme, kple mɔ̃ɖaŋununya ƒe ŋutete nu. Ðo kpe mɔɖeɖe ɖe nu ŋu tututu dzi ne èle ga home biam.
Woate ŋu atsɔ PETG, PVC, PET, kple nu vevi siwo wowɔ ɖekae ada PETG ƒe nutsyɔnu kpɔ. Esi wònye be nuléle ɖe nu ŋu nɔ te ɖe nusi wotsɔ blae, nuŋlɔtsi, alesi wowɔa nu ɖe anyigba dzi, kple alesi wotsɔa nu ƒoa nui dzi ta la, ehiã be woado kpɔɖeŋuwo kpɔ kple kaɖi bliboa hafi woawɔe le agbɔsɔsɔ gã me.
Nusiwo sɔ ɖe wo nɔewo nu nɔ te ɖe nenye be wota agbalẽa ɖe nu vevitɔa dzi alo ɖe nusi ŋu wowɔ atike ɖo dzi tẽ, kpakple nuŋlɔtsi ƒe atikewɔwɔ kple eƒe ƒuƒu ƒe mɔnu dzi. Na wò offset, UV, screen, digital, alo agbalẽtatamɔnu bubu ale be Wallis nate ŋu akafu dodokpɔmɔnu aɖe.
Xexeame katã ƒe ɖoɖo aɖeke meli na kaɖi ƒe xɔtutu ɖesiaɖe o. Ele be woaɖo dzoxɔxɔ si sɔ la ɖekae kple nyaƒoɖeamenu, ɣeyiɣi si woatsɔ anɔ anyi, nu veviwo, nuŋlɔtsi, nusi wotsɔ blae, agbalẽvi, kple lamination pad. Dze egɔme kple kpɔɖeŋu dodokpɔ si dzi wokpɔ ŋusẽ ɖo eye nàda asi ɖe emetsonua dzi hafi woawɔe le agbɔsɔsɔ gã me.
Ɛ̃. Nusiwo li ƒe ɖoɖowo dometɔ aɖewoe nye esiwo ŋu wofa nu me kɔ, esiwo wofa sesĩe, esiwo le keklẽm, matte, frosted, anti-scratch, velvet, laserable, kple magnetic stripe overlay. Ele be woaɖo kpe ƒokpli si li dzi le eƒe titrime, lolome, agbɔsɔsɔ, kple kaɖia zazã nu.
Woate ŋu adzro HiCo kple LoCo ƒe tiatiawɔblɔɖewo me, siwo dometɔ aɖewoe nye amedzizizi, fli ƒe kekeme, amadede, kple nɔƒe. Ðo nɔnɔmetata alo kaɖi ƒe ɖoɖo si dzi woda asi ɖo ɖa ale be woate ŋu alé ŋku ɖe magnet-ka ƒe ɖoɖoa ŋu hafi awɔe.
Zã nu vevi si wota ŋutɔŋutɔ, ink, inlay, dɔwɔnuwo, agbalẽviwo, kple ewɔwɔ ƒe ɖoɖowo. Da alesi wòdzena le gaglãgbe, eƒe lãgbalẽ ƒe ŋusẽ, eƒe gbadzaƒe, eƒe ʋuʋu, kuɖɔ, nugbɔ ƒe kadodo, anyigba ƒe nɔnɔme madeamedzi, ƒoƒo, ƒoƒo, ame ŋutɔ ƒe nɔnɔme, kple magnet alo chip ƒe dɔwɔwɔ kpɔ le afisi wòsɔ le.
Na nusi wotsɔ wɔe ƒe ƒomevi, eƒe titrime, eƒe didime, nuwuwu, nusi wotsɔ blae ƒe tɔtrɔ, magnetic stripe ƒe nudidiwo, agbɔsɔsɔme, kaɖi ƒe dɔwɔwɔ, kaɖi ƒe wɔwɔme si li fifia, kpɔɖeŋu ƒe hiahiãwo, babla ƒe nudidiwo, afisi woatsɔe ayi, kple sedziwɔwɔ alo dodokpɔ ŋuti nuŋlɔɖi ɖesiaɖe si wò dɔa bia.
Ɣeyiɣi si woatsɔ awɔ dɔe la toa vovo le nɔnɔme si wobia, nudɔdɔ ƒe agbɔsɔsɔ, nusi wotsɔ blae, magnet-ka, tɔtrɔ ɖe nɔnɔmewo ŋu, kpɔɖeŋu ƒe mɔɖeɖe, kple ewɔwɔ ƒe ɖoɖowɔɖi nu. Wallis ana akɔntabubu si li fifia le RFQ bliboa me toto vɔ megbe.
Ðo wò kaɖi ƒe wɔwɔme, PETG ƒe nutsyɔnu ƒe titrime, agbalẽa ƒe didime, anyigba ƒe nuwuwu, agbalẽtata ƒe mɔnu, lamination parameters, ame ŋutɔ ƒe tɔtrɔ ƒe ɖoɖo, agbɔsɔsɔme si wobu, kple teƒe si nèyina ɖa. Wallis ato dɔbiagbalẽvia me eye wòakafu kpɔɖeŋu kple nusiwo woatsɔ ana ƒe nɔnɔme si sɔ.
