Kɔkɔe PETG Coated Overlay Kple PET Inlay na Lamination-WallisPlastic

Le kaɖiwo wɔwɔ kple dzesideɖoɖowo gome la, nusiwo wozãna ƒe nyonyome wɔa akpa vevi aɖe le alesi nu mamlɛtɔa anɔ anyi eteƒe nadidi kple dedienɔnɔ me. Nu vevi eve siwo le ɖoɖo sia mee nye PETG si wotsɔ bla nu kple PET ƒe nutsyɔnu. Nu siawo le vevie ŋutɔ na agbalẽvi siwo wotsɔ lãgbalẽ wɔe siwo ate ŋu anɔ te ɖe ɣeyiɣi ƒe dodokpɔ nu.

Nu	PETG/PET ƒe dɔwɔwɔ
Eƒe titrime	0.04mm-0.15mm ƒe didime
Lolome	A4/A3/Wowɔe ɖe ɖoɖo nu
Kpɔɖeŋu	Nusi Wotsɔ Kpe Ðe Nu Ŋu
	Nusiwo Wometsɔ Kpe Ðe Eŋu O
	Laserable ƒe Nutsyɔnu
	Sesẽ si Wofa Ðe Nu Ŋu
Magnetic Coated Nutsyɔnu

2.Gɔmesese PETG Coated Overlays

2.1.Nukae nye PETG?

PETG, alo Polyethylene Terephthalate Glycol, nye dzoxɔxɔ ƒe polymer si wonya be eƒe eme kɔ, ŋusẽ le eŋu, eye wòte ŋu nɔa te ɖe atikewo nu etɔxɛe. Wozãnɛ zi geɖe le dɔ vovovowo me, siwo dometɔ aɖewoe nye nubablɛwo, atikewɔnuwo, kple vevietɔ le míaƒe numedzodzro me la, kaɖiwo wɔwɔ.

2.2.Akpa si PETG Coated Overlays wɔna

Nusiwo wotsɔ tsyɔ PETG dzi nyea ametakpɔnu na agbalẽvi siwo wota. Wozãa wo le kaɖia wɔwɔ me be woanɔ anyi eteƒe nadidi, woaxe mɔ ɖe woƒe vuvu nu, eye woana woatsi tre ɖe ʋuʋudedi kple ʋuʋudedi ŋu. Nusiwo wotsɔ blaa nu siawo kpɔa egbɔ be nyatakaka siwo wota ɖe agbalẽviawo dzi la nɔa anyi nenema, le nɔnɔme sesẽwo gɔ̃ hã me.

3.Viɖe siwo le PETG Coated Overlays ŋu

3.1.Enhanced Durability : 1.1. 

PETG ƒe nutsyɔnu dzia agbalẽviawo ƒe agbenɔƒe ɖe edzi ŋutɔ, si wɔe be wosɔ nyuie na zazã ɣeyiɣi didi.

3.2.UV Tsitretsitsi : 

Wokpɔa kaɖiwo ta tso UV keklẽ me, si wɔnɛ be nɔnɔmetata kple nuŋɔŋlɔ siwo wota la megavuvu le ɣeyiɣi aɖe megbe o.

3.3.Scratch Tsitretsitsi : 

PETG ƒe nutsyɔnu nana be woate ŋu axe mɔ nyuie ŋutɔ, si wɔnɛ be kaɖia ƒe dzedzeme nɔa anyi.

3.4.Atikewo ƒe Tsitretsitsi : 

Woate ŋu anɔ te ɖe atikewo zazã nu, si ana woakpɔ egbɔ be agbalẽvi la le blibo le nɔnɔme vovovowo me.

4.PET Inlays: Akpa Vevitɔ

4.1.Nukae Nye PET Inlays?

PET inlays, si wogayɔna be RFID (Radio-Frequency Identification) inlays, nye nu vevitɔ le smart cardwo kple dzesidemɔ̃ siwo me kadodo mele o ƒe dzi. Wonye RFID chip kple antenna, si wotsɔ de PET substrate me.

5.PET Inlays ƒe dɔwɔwɔ

Wozãa PET inlays geɖe le:

5.1.Access Dzikpɔkpɔ : 

Wonana be woate ŋu awɔ ɖoɖo siwo dzi woato akpɔ mɔ siwo dzi woato age ɖe eme dedie, si wɔnɛ be dedienɔnɔ nyona ɖe edzi le teƒe siwo woxe mɔ ɖo.

5.2.Fexexegbalẽviwo : . 

Fexexegbalẽvi geɖe siwo me kadodo mele o zãa PET inlays hena asitsatsa kabakaba eye wòanɔ bɔbɔe.

5.3.Dzesidede ame : . 

Wozãa wo le dziɖuɖu ƒe ID-gbalẽviwo, dɔwɔlawo ƒe akɔtagbalẽviwo, kple hamevinyenye ƒe agbalẽviwo me.

6.Viɖe siwo le PET Inlays ŋu

6.1.Mɔ̃ɖaŋununya si me kadodo aɖeke mele o : 

PET inlays wɔnɛ be woate ŋu awɔ asitsatsa kple mɔɖeɖe si me kadodo mele o, si wɔnɛ be wowɔa dɔ nyuie wu eye wowɔa dɔ nyuie wu.

6.2.Dedienɔnɔ : . 

Wodoa dedienɔnɔ ɖe ŋgɔ to mɔxexe ɖe ame siwo ŋu womeɖe mɔ ɖo o ƒe gege ɖe eme kple aʋatso agbalẽviwo nu me.

6.3.Anɔ anyi eteƒe nadidi : 

PET inlays nɔa anyi didina ŋutɔ eye woate ŋu anɔ te ɖe gbesiagbe zazã ƒe sesẽ nu.

7.Applications ƒe PETG Coated Overlays kple PET Inlays

7.1.Dzesidegbalẽviwo

Wozãa PETG-nu siwo wotsɔ blaa nu ɖe ​​nu dzi kple PET-nu siwo wotsɔ blaa nu siaa ŋudɔ geɖe le dzesidegbalẽviwo wɔwɔ me. Kpekpeɖeŋugbalẽvi siawo, siwo wozãna na dɔwɔlawo ƒe akɔtagbalẽviwo, mɔɖeɖe ɖe nu ŋu, kple hamevinyenye ƒe agbalẽviwo, hiã be woanɔ anyi eteƒe nadidi eye woanɔ dedie, si wɔe be PETG kple PET-nuzazãwo nye tiatia nyuitɔwo.

7.2.Ʋukulawo ƒe Mɔɖegbalẽwo

Le dziɖuɖumegãwo ƒe dzesidede ame ƒe akpa dzi la, ʋukugbalẽviwo ɖea vi ŋutɔ tso PETG ƒe nutsyɔnu kple PET ƒe nutsyɔtsyɔ me. Nu siawo kpɔa egbɔ be mɔɖegbalẽwo gakpɔtɔ li eye womate ŋu atrɔ asi le wo ŋu o.

7.3.Smart Kpekpeɖeŋugbalẽviwo

Smart cards, siwo dome contactless payment cards kple access cards hã le, ɖoa ŋu ɖe sesẽ kple dedienɔnɔ si PETG overlays kple PET inlays naa ŋu.

8.Combining PETG Coated Overlays kple PET Inlays

Ne míeƒo nu tso agbalẽvi siwo wotsɔ lãgbalẽ wɔe siwo le nyonyome nyuitɔ kekeake wɔwɔ ŋu la, PETG-fatanu siwo wotsɔ bla nu kple PET-nu siwo wotsɔ ƒo ƒui la nye nusi womate ŋu aɖu o. Alesi wowɔa dɔ ɖekae nye esi:

8.1.Takpɔkpɔ kple Dedienɔnɔ : 

PETG ƒe nutsyɔnuwo kpɔa PET ƒe nutsyɔnuawo ta, si wɔnɛ be mɔ̃ɖaŋununya si wotsɔ de eme la gakpɔtɔ li eye wòle dɔ wɔm.

8.2.Anɔ anyi eteƒe nadidi : 

Alesi nu siawo wɔa dɔ aduadui la wɔnɛ be menye ɖeko agbalẽvi siwo nɔa anyi didina ko o, ke womete ŋu trɔa asi le wo ŋu o eye womete ŋu vuvu hã o.

8.3.Alesi woate ŋu azã le mɔ vovovowo nu : 

Nusiwo wotsɔ ƒo ƒui sia nye esiwo woate ŋu azã le mɔ vovovowo nu, esɔ na dɔ vovovowo wɔwɔ, tso ID-gbalẽviwo dzi va ɖo mɔɖeɖe ƒe akɔtagbalẽviwo dzi.

9.Nyataƒoƒo

Le lamination ƒe afisiafi la, nuwo tiatia ate ŋu akpɔ ŋusẽ gã aɖe ɖe nusi woawɔ mlɔeba ƒe nyonyome kple agbenɔƒe didi dzi. PETG-nu siwo wotsɔ tsyɔ nu nu dzi kple PET-nu siwo wotsɔ blaa nu, kple woƒe eme kɔ etɔxɛe, wonɔa anyi didina, eye woate ŋu azã wo le mɔ vovovowo nu la va zu nusiwo hiã vevie le dɔwɔƒe vovovowo. Ne wole laminated ƒe emetsonu deŋgɔ siwo nɔa te ɖe ɣeyiɣi ƒe dodokpɔ nu dim la, PETG coated overlays kple PET inlays ye nyea aʋadziɖula siwo dze ƒã.

Míaƒe Producing line

Míaƒe Nudzraɖoƒe

Nyabiasewo ƒe Nyabiasewo

1.Ðe PETG coated overlays kple PET inlays gbugbɔgawɔa?

Ẽ, woate ŋu agbugbɔ PETG kple PET-nuawo siaa awɔ dɔe, si wɔnɛ be wowɔa kaɖiwo ƒe ɖoɖo si li tegbee wu.

2.Cate PETG coated overlays be woatrɔ asi le kple dzesidenu akpawo?

Blibo. Woate ŋu atrɔ asi le PETG ƒe nutsyɔnuwo ŋu kple dzesidenuwo, nuŋɔŋlɔwo, kple dzesidenu bubuwo be woawɔ kaɖi ƒe nɔnɔme tɔxɛwo.

3.Ðe PET inlays kpɔa ŋusẽ ɖe laminated kaɖiwo ƒe asitɔtrɔ le nɔnɔmewo ŋu dzia?

PET inlays nana woƒe sesẽme nyona ɖe edzi gake wowɔ wo be woalé kaɖia ƒe asitɔtrɔ ɖe nɔnɔmewo ŋu me ɖe asi, si wɔnɛ be wo zazã le bɔbɔe.

4.Ðe PETG overlays te ŋu nɔa te ɖe atikewo ƒe dodo nua?

Ẽ, PETG ƒe nutsyɔnu nana be woate ŋu anɔ te ɖe atike vovovowo nu, si wɔe be wosɔ na nuto vovovowo.