|
WLS-INKJET NKYERƐKYERƐMU
WALLIS na ɔkyerɛwee
| Kɔla: | |
|---|---|
| Kɛse: | |
| Ne kɛse : | |
| Nea ɛwɔ soro: | |
| Dodow: | |
Wallis PETG coated overlay sheet lamination film yɛ ade a ɛbɔ ho ban a ɛda adi pefee a wɔayɛ ama mfiridwuma mu plastic kaad a wɔyɛ. Wɔabɔ no laminated wɔ printed card core no so de abɔ mfonini ne personalization data ho ban bere a ɛma bonding stability, abrasion resistance, chemical resistance, ne wie card surface no tu mpɔn.
Wɔayɛ nneɛma no ama wɔn a wɔyɛ ID kaad, adwumayɛbea ahorow a wɔyɛ smart card, wɔn a wɔyɛ kaad a wɔde tua ka, wɔn a wɔde kaad a wɔde kɔ hɔ, nnwumakuw a wotintim kaad, adwumayɛbea ahorow a wɔyɛ nneɛma a ɛfa obi ankasa ho, ne wɔn a wɔkyekyɛ kaad ho nneɛma . Standard ne customized thicknesses, sheet sizes, coating systems, surface finishes, ne magnetic stripe configurations wɔ hɔ ma card structures ahodoɔ.
Optical clearrity a ɛkorɔn ma mfonini ahorow a wɔatintim, nsɛm, barcodes, logos, ne ahobammɔ mfonini ahorow.
Coated soro engineered ma ahotoso bonding bere a card lamination.
Ɛwɔ hɔ ma PVC, PET, PETG, ne composite card adansi a ɛne no hyia.
Gloss, matte, frosted, anti-scratch, laserable, ne magnetic stripe a wobetumi apaw.
Amanne krataa nsusuwii ne thicknesses ma production-line ahwehwɛde.
| Adwadeɛ | PETG a wɔde akata so krataa ne lamination film ma plastic nkrataa |
| Dwumadi Titiriw | Ɛbɔ printed card core ho ban na ɛboa stable layer bonding bere a lamination |
| Adetɔfo a Wɔtaa Yɛ | Nnwumayɛbea ahorow a wɔyɛ kaad, wɔn a wɔyɛ nkrataa a ahobammɔ wom, nnwumakuw a wotintim nhoma, mmeae a wɔyɛ nneɛma ma obiara, ne wɔn a wɔkyekyɛ |
| Nneɛma a Wɔtaa De Di Dwuma | ID kaad, akwan a wɔfa so kɔ hɔ, sikatua kaad, akwantu ho nkrataa, ahɔhodan mu safe kaad, nokwaredi nkrataa, ne smart card |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Ne kɛse, ne kɛse, ahoɔden a wɔde kata so, ne wie, ne laserable layer, ne magnetic stripe nhyehyɛe |
| Parameter | Nkyerɛkyerɛmu a Ɛwɔ Hɔ |
|---|---|
| Atadeɛ | PETG |
| Ahosuo | Fann; akwan foforo a wobetumi apaw a egyina adwuma no ahwehwɛde ahorow so |
| Nneɛma a ɛyɛ den | 0.04-0.15 mm gyinapɛn kwan so; foforo customized thicknesses a ɛwɔ hɔ bere a mfiridwuma mu adansedi akyi |
| Krataa no Kɛse | A4, A3, ne kaad-ayɛyɛ nhyehyɛe ahorow a wɔayɛ no sɛnea wɔpɛ |
| Nneɛma a Wɔde Ma no Format | Twitwa nkratafa anaasɛ customized format sɛnea order ahwehwɛde ahorow te |
| Surface Finish a Wɔde Awie | Gloss, matte, smooth, frosted, anti-scratch, velvet, anaasɛ wɔayɛ no sɛnea wɔpɛ |
| Nhwɛso ahorow a Wɔde Kata So | Nneɛma a wɔde kata so, nea wɔde akata so denneennen, nea wɔde kata so a wotumi de laser, ne nkataso a wɔde magnetic akata so |
| Magnetic Stripe Nneɛma a Wɔpaw | HiCo, LoCo, 300 Oe, 600 Oe, 2750 Oe, ne 3000 Oe, a egyina kaad nhyehyɛe so |
| Kaad Cores a ɛne ne ho hyia | PETG ne PVC, PET, anaa composite card nhyehyeɛ a ɛne no hyia wɔ nhwɛsoɔ sɔhwɛ akyi |
| Agyapade Titiriw | Optical pefee, coating adhesion, abrasion a ɛko tia, nsuo a ɛko tia, nnuru a ɛko tia, ne dimensional stability |
| Nhwɛsode Sɔhwɛ | Wɔkamfo kyerɛ ansa na wɔayɛ no kɛse de asi kaad nhyehyɛe a edi mũ ne lamination mfɛnsere no so dua |
PETG a ɛda adi pefee no ma mfonini ahorow a wɔatintim, nsɛm, ahyɛnsode ahorow, barcode ahorow, mfonini ahorow a ɛyɛ fɛ, ne ahobammɔ nneɛma kɔ so da adi wɔ lamination akyi. Optical quality a ɛkɔ so daa ho hia titiriw ma identification, sikasɛm, ne branded card nhyehyɛe ahorow a akenkan ne sɛnea ɛte wɔ soro no nya kaad a wɔawie no a wogye tom no so nkɛntɛnso.
Wɔayɛ ɔfasu a wɔakata so no sɛnea ɛbɛyɛ a ɛne ade a wɔatintim a ɛne no hyia bɛbom wɔ ɔhyew ne nhyɛso a wɔahyɛ so. Nneɛma a ɛne ne ho hyia yiye boa ma wɔtew delamination, mframa a ɛkyere, ɔfasu so sintɔ, anoano a wɔma so, deformation, ne kɔla nsakrae so. Ɛsɛ sɛ wɔde nhyehyɛe a etwa to denam sɔhwɛ ahorow a wɔde adetɔfo no ink nhyehyɛe, core material, laminator, dade mprɛte, pads, nhyɛso, ɔhyew, ne bere a wɔde tra hɔ di dwuma so si hɔ.
Sɛ wɔde laminated wie a, PETG a wɔde kata so no yɛ kaad no akyi ahobammɔ fã no. Ɛboa ma wɔbɔ nsɛm a wɔatintim ho ban fi akasakasa, nsateaa nkyerɛwee, nsu, nnuru a wɔtaa de di dwuma, ne sɛnea wɔde di dwuma mpɛn pii ho, na ɛboa ma ɛyɛ adwuma tenten na ɛma kaad no yɛ nea ɛkɔ so daa.
Nneɛma a ɛyɛ den a wɔahyɛ so, ɛyɛ petee, nneɛma a ɛho tew, ne nsusuwii a ɛyɛ den ho hia ma nkyerɛwde ne nea wotumi san yɛ bio wɔ kaad adansi a ɛwɔ ntoatoaso pii mu. Wɔ nnwuma a wɔyɛ no kɛse mu no, ɛsɛ sɛ adetɔfo si so dua sɛ wotumi gyina ne kɛse ano, sɛnea krataa no yɛ ahinanan, sɛnea ɛho tew wɔ soro, sɛnea ɛtew nneɛma so, ne sɛnea ɛyɛ batch-to-batch a ɛkɔ so pɛpɛɛpɛ wɔ nkyerɛkyerɛmu a wɔapene so no mu.
Wallis betumi de overlay versions ahorow ama ama visual, tactile, ahobammɔ, ne encoding ahwehwɛde ahorow. Nneɛma a wubetumi apaw bi ne gloss a emu da hɔ, matte, frosted, anti-scratch, velvet, laserable, nea wɔde akata so denneennen, ne magnetic stripe overlays. Sɛnea wobetumi anya no gyina ne kɛse, ne kɛse, ne dodow a wɔkra, ne sɛnea wɔyɛ kaad no a wɔhwehwɛ so.
Kaad a wɔde laminated ayɛ a wɔtaa de kata so di dwuma wɔ akyi abien no nyinaa so, na wɔde core sheets a wɔatintim ne inlay anaa functional layer biara a wɔde si wɔn ntam. Ɔdansi no pɛpɛɛpɛ gyina kaad a wɔde asi wɔn ani so no kɛse, chip anaa antenna nhyehyɛe, magnetic stripe, ɔkwan a wɔfa so yɛ ankorankoro, ne sɛnea wɔhwehwɛ sɛ ɛtra hɔ kyɛ so.
Top PETG overlay: bɔ anim tintim no ho ban na ɛma ɔfasu a wɔapaw no wie.
Printed core layer: ɛkura mfonini, nsɛm, ahyɛnsodeɛ, nsɛm a ɛsakra, ne ahobanbɔ adwini.
Inlay a wopɛ anaasɛ functional layer: ebetumi akura RFID antenna, chip module mmoa, anaa card mfiridwuma foforo.
Printed back core layer: ɛwɔ reverse-side graphics, akwankyerɛ, nsaano nkyerɛwee, anaa branding.
Bottom PETG overlay: bɔ akyi fã no ho ban na ɛwie laminated card nipadua no.
Sɛ wotumi de ho to so a, ɛsɛ sɛ wobu layer no nyinaa mu duru ho akontaa ansa na wɔakra. Ɛsɛ sɛ adetɔfo sɔ stack a edi mũ no hwɛ sen sɛ wɔbɛsɔ overlay no nkutoo ahwɛ.
| Selection Factor | PETG Overlay | PVC Overlay | PC Overlay |
|---|---|---|---|
| Gyinabea a Wɔtaa De Si Hɔ | Kari pɛ pefee, toughness, ne lamination adwumayɛ | Nneɛma a ɛho ka sua a wɔde yɛ plastic nkrataa a wɔde di dwuma daa | Premium nneɛma ma high-durability ne high-security cards |
| Nneɛma a Wɔtaa De Di Dwuma | ID, smart, sikatua, kwan a wɔfa so kɔ hɔ, akwantuo, ne asɔremma nkrataa | Akyɛde, nokwaredi, asɔremma, nsɛm a wɔde hyɛ nkurɔfo nkuran, ne ID nkrataa a wɔde ma wɔ ɔkwan a ɛkɔ akyiri so | Aban ID, karka tumi krataa, akwantu tumi krataa data krataafa, ne adansedi nkrataa a ahobammɔ wom |
| Nneɛma a Wɔde Di Dwuma Focus | Layer bonding a emu yɛ den a ɛne card cores a ɛne no hyia | Wɔde adwumayɛ ne nnwinnade a ɛtrɛw ho nimdeɛ asi hɔ | Higher-ɔhyew dwumadie ne laser engraving tumi |
| Paw a Ɛsen Biara Bere a | Adwuma no hia adansi a ɛyɛ den a egyina PETG so anaasɛ ɛne ne ho hyia | Budget ne kaad a wɔyɛ no sɛnea wɔtaa yɛ no ne ade titiriw | Ɛho hia sɛ wɔde nkwa nna a ɛsen biara, ɔhyew a ɛko tia, anaa ahobammɔ a ɛkɔ akyiri |
Ɛsɛ sɛ wɔpaw nneɛma a wɔde bɛyɛ adwuma no gyina kaad a wɔasisi no nyinaa, ɔsom tebea a wɔhwɛ kwan, mfiridwuma a wɔde yɛ ankorankoro, ahwehwɛde ahorow a wɔde di mmara so, nnwinnade, ne adwuma no sikasɛm so. Wallis betumi de nhwɛsode ahorow ama ama ntotoho lamination sɔhwɛ.
PETG overlay bɔ mfonini, nsɛm a wɔatintim, barcode, QR code, nsaano nkyerɛwee, ne ahobammɔ mfonini ahorow a wɔde di dwuma wɔ ahyehyɛde ne adansedi nkrataa so ho ban. Wobetumi asusuw laserable anaa specialty versions ho bere a adwuma no hwehwɛ sɛ wɔyɛ personalization dwumadi afoforo.
Kaad a wɔtaa soa na wodi ho dwuma no hwehwɛ sɛ wɔde baabi a ɛho tew na wɔde laminated dan a ɛyɛ den. Wobetumi asiesie PETG a wɔde akata so ama sikasɛm nkrataa a wɔatintim na wɔde aka magnetic stripe a ɛfata ho bere a ɛho hia no.
Wobetumi de PETG overlay adi dwuma wɔ kaad nhyehyɛe a RFID inlays anaa nneɛma a ɛfa chip ho wom mu. Nhwɛso sɔhwɛ ho hia na ama wɔahwɛ sɛ bonding, antenna ahobammɔ, awiei koraa no flatness, punching quality, ne chip-module compatibility.
Wɔ aguadi kaad nhyehyɛe a ɛdɔɔso ho no, PETG a wɔde kata so boa ma wɔbɔ ahyɛnsode a wɔatintim ne nsɛm a wɔde di dwuma da biara da ho ban. Gloss, matte, frosted, anaa tactile finishes betumi aboa ahwehwɛde ahorow a ɛfa aniwa ne sɛnea wɔde di dwuma ho.
| Overlay Type | a Wɔkamfo kyerɛ sɛ wɔmfa nni dwuma |
|---|---|
| Clear Coated Overlay a Wɔde Kata So | General transparent ahobammɔ ma printed card surfaces |
| Nneɛma a Wɔde Kata So a Ɛyɛ Den | Nnwuma a ɛhwehwɛ sɛ wɔma bonding a ɛkɔ anim a wɔde core a wɔatintim a ɛne no hyia di dwuma |
| Laserable a Wɔde Kata So | Kaad nhyehyɛe a ɛhwehwɛ sɛ wɔde laser agyiraehyɛde anaasɛ laser-gyina personalization akyi validation |
| Matte anaa Frosted Overlay a Wɔde Kata So | Low-glare surfaces ne premium aniwa so nkyerɛkyerɛmu |
| Anti-Scratch Overlay a Wɔde Kata So | Kaad a wɔtaa di ho dwuma a ɛhwehwɛ sɛ wɔbɔ ho ban kɛse wɔ soro |
| Magnetic Stripe a Wɔde Kata So | HiCo anaa LoCo magnetic card production a wɔakyerɛ stripe gyinabea ne coercivity |
Sɛnea ɛbɛyɛ na wɔakamfo PETG a wɔde kata so a ɛfata akyerɛ no, Wallis hwehwɛ nkataso no mu bom ne adetɔfo no core a wɔatintim, kaad nhyehyɛe, nnwinnade, ne ɔkwan a wɔfa so yɛ no ankasa. Mfiridwuma ho nsɛm a emu da hɔ brɛ nhwɛsode kyinhyia so tew na ɛboa ma wosiw nneɛma a ɛne ne ho nhyia bere a wɔreyɛ nneɛma pii no ano.
Wɔhwehwɛ sɛ ɛyɛ overlay thickness, krataa kɛse, ne akontaabu dodow a wɔkra.
Card core material ne layer biara a ɛwɔ card structure no mu no mu duru.
Ɔkwan a wɔfa so tintim ne ink su, a UV, offset, screen, anaa dijitaal akwan ka ho.
Lamination hyew, nhyɛso, bere a ɛtra hɔ, mprɛte, ne pad nhyehyɛe.
Nea wɔhwehwɛ sɛ wɔde wie: gloss, matte, frosted, anti-scratch, velvet, anaasɛ wɔayɛ no sɛnea wɔpɛ.
Ɔkwan a wɔfa so yɛ ankorankoro te sɛ laser agyiraehyɛde, embossing, magnetic encoding, anaa chip embedding.
Target application, ɔsom tebea, sɔhwɛ ahwehwɛde, ne baabi a wɔde bɛkɔ.
Si mfiridwuma ho nkyerɛkyerɛmu ne card-layer adansi no so dua.
Sɔ ananmusifo PETG overlay samples hwɛ ne ankasa core ne ink nhyehyɛe.
Hwɛ peel ahoɔden, peel, transparency, surface finish, punching, ne personalization adwumayɛ.
Pene nhwɛsode a wɔde gyina so ne nea wɔakyerɛw so ansa na wɔayɛ no kɛse.
Fa production parameters a wɔapene so no di dwuma ma incoming ne batch-quality control.
Ɛsɛ sɛ PETG overlay surfaces kɔ so tew na ɛyɛ tratraa ansa na wɔayɛ lamination. Wallis de nneɛma a wɔde kɔ amannɔne a ɛbɔ ho ban a wɔayɛ sɛ ɛbɛtew mfutuma, nsu, nea ɛbɛkotow, anoano a ɛsɛe, nea ɛwɔ soro a ɛyɛ mmerɛw, ne nea ɛkɔ baabiara bere a wɔde rekɔ amanaman ntam no so di dwuma. Wobetumi ayɛ nsakrae wɔ nneɛma a wɔde kyekyere nneɛma ho nhyehyɛe mu ma ɛne krataa kɛse, dodow, pallet ahwehwɛde, ne ɔkwan a wɔfa so de mena no ahyia.
Ahobammɔ Container Loading
Export Packaging ne Nneɛma a Wɔde Kɔ amannɔne
Wallis de plastic card nneɛma ma B2B adetɔfoɔ a ɛhia sɛ wɔde ma mpɛn pii, wɔyɛ no sɛnea wɔpɛ, nhwɛsoɔ mmoa, ne mfiridwuma mu nkitahodiɛ. Adetɔfo betumi anya PETG overlay abom ne core sheets a ɛne no hyia, magnetic stripe nneɛma, inlays, ne card-production components afoforo denam adetɔnfo biako so.
Bɛboro mfe 15 osuahu wɔ nneɛma a wɔyɛ ne nneɛma a wɔde kɔ amannɔne mu.
Nnwumayɛbea ahorow ason a wɔboa plastic krataa ne sini nneɛma pii.
Wɔbɔɔ amanneɛ sɛ ɔsram biara nneɛma a wɔde ma a ɛkɔ soro kodu tɔn 8,000 wɔ nneɛma ahorow mu.
Custom thickness, dimensions, surface coatings, finishes, ne kaad-nneɛma a wɔaka abom.
Nhwɛsode mmoa ma lamination ne personalization sɔhwɛ ansa na bulk orders.
Mfiridwuma ho mmuae ne kaad nneɛma a wɔde gyina hɔ biako ma amanaman ntam adetɔfo.
Adwumayɛfo Mmoa Kuw
Wiase Nyinaa B2B Adetɔfo
Kaad Nneɛma a Wɔyɛ
Wɔde PETG a wɔde akata so no abɔ kaad a wɔatintim no akyi. Ɛbɔ mfonini ahorow a wɔatintim ne data a ɛsakra ho ban, ɛma wonya ɔfasu a etwa to a wɔde wie, na ɛboa ma wɔyɛ kaad nhyehyɛe a ɛyɛ bonded multi-layer.
Standard listed range no yɛ 0.04-0.15 mm. Wobetumi ayɛ nneɛma afoforo a ɛyɛ den sɛnea kaad no nhyehyɛe, kaad a wɔawie no nyinaa mu duru, sɛnea wɔayɛ, dodow, ne mfiridwuma mu mmɔdenbɔ te. Si abodwokyɛre pɔtee no so dua bere a worebisa sɛ wɔmfa nsɛm a wɔafa aka no.
Wobetumi de PETG, PVC, PET, ne composite cores a ɛne no hyia asusuw PETG overlay ho. Esiane sɛ adhesion gyina coating, ink, surface treatment, ne lamination tebea so nti, ɛho hia sɛ wɔde sample testing ne card stack a edi mũ no ansa na wɔayɛ no pii.
Sɛnea ɛne ne ho hyia no gyina sɛ ebia wɔde nhoma tintim gu ade a ɛwɔ mu no mu anaasɛ wɔde bɛhyɛ baabi a wɔayɛ ho adwuma tẽẽ, ne ɔkwan a wɔfa so yɛ ink ne ɔkwan a wɔfa so ma ɛyow no so. Fa wo offset, UV, screen, digital, anaa tintim nhyehyɛe foforo ma sɛnea ɛbɛyɛ a Wallis betumi akamfo sɔhwɛ nhyehyɛe bi akyerɛ.
Amansan nhyehyɛe biara nni hɔ a wɔde bɛyɛ kaad adansi biara. Ɛsɛ sɛ wɔde ɔhyew a ɛfata no bom si hɔ ne nhyɛso, bere a wɔde tra hɔ, ade titiriw, ink, ade a wɔde kata so, mprɛte, ne lamination pad. Fi ase de nhwɛsode sɔhwɛ a wɔahyɛ da ayɛ na pene nea efi mu ba no so ansa na wɔayɛ no kɛse.
Aane. Nsiesiei ahorow a ɛwɔ hɔ no bi ne nea wɔde kata so pefee, nea wɔde akata so denneennen, nea ɛhyerɛn, matte, frosted, anti-scratch, velvet, laserable, ne magnetic stripe overlay. Ɛsɛ sɛ wosi nkabom a ɛwɔ hɔ no so dua denam ne kɛse, ne kɛse, dodow, ne kaad a wɔde di dwuma no so.
Wobetumi asusuw HiCo ne LoCo akwan horow ho, a nea ɛka ho ne nhyɛso, nsensanee trɛw, kɔla, ne gyinabea. Fa mfonini anaa kaad nhyehyɛe a wɔapene so mena sɛnea ɛbɛyɛ a wobetumi ahwɛ magnetic stripe nhyehyɛe no ansa na wɔayɛ.
Fa core a wɔatintim ankasa, ink, inlay, nnwinnade, mprɛte, ne nhyehyɛe a wɔde yɛ nneɛma di dwuma. Hwɛ sɛnea ɛda adi pefee, ahoɔden a ɛwɔ peel mu, sɛnea ɛyɛ tratraa, nea ɛtwetwe, ahurututu, anoano a ɛka bom, nea ɛwɔ soro, akuturuku, akuturuku, nea ɛyɛ nea wopɛ, ne magnetic anaa chip adwumayɛ wɔ baabi a ɛfata.
Fa nneɛma no su, ne kɛse, ne kɛse, wie, nea wɔde kata so, magnetic stripe ahwehwɛde, dodow, kaad a wɔde di dwuma, mprempren kaad nhyehyɛe, nhwɛsode ahiade, nneɛma a wɔde kyekyere nneɛma a wɔhwehwɛ, baabi a wɔde bɛkɔ, ne nkrataa biara a ɛfa mmara so anaa sɔhwɛ a wo adwuma no hwehwɛ ma.
Bere a wɔde di dwuma no gu ahorow sɛnea wɔabisa no, dodow a wɔkra, nea wɔde kata so, magnetic stripe, customization, sample approval, ne production nhyehyɛe. Wallis de mprempren akontaabu bɛma bere a wahwɛ RFQ a edi mũ no mu awie no.
Fa wo kaad nhyehyɛe, PETG overlay thickness, krataa no nsusuwii, ɔfasu awie, ɔkwan a wɔfa so tintim, lamination parameters, personalization nhyehyɛe, dodow a wɔasusuw, ne baabi a worekɔ. Wallis bɛhwɛ akwammisa krataa no mu na wakamfo nhwɛsode ne nneɛma a wɔde bɛma ho nkyerɛkyerɛmu a ɛfata akyerɛ.
