|
WLS-INKJET NKYERƐKYERƐMU
WALLIS na ɔkyerɛwee
| Kɔla: | |
|---|---|
| Kɛse: | |
| Ne kɛse : | |
| Nea ɛwɔ soro: | |
| Dodow: | |
Wallis de PETG a wɔde akata so ne PET inlay nneɛma ma adwumayɛfoɔ a wɔyɛ kaad a wɔyɛ ID kaad a ɛkyɛ, kwan a wɔfa so kɔ hɔ, RFID kaad, NFC kaad, sikatua kaad, akwantuo kaad, asɔremma kaad, ahɔhodan mu safe kaad, ne smart card a wɔayɛ no sɛnea wɔpɛ.
PETG a ɛda adi pefee no na ɛyɛ laminated card no akyi fã a ɛbɔ ho ban no, bere a PET inlay no yɛ emu structure anaa functional layer no. Ɛgyina adwuma no so no, wobetumi de PET inlay no ama sɛ plain card core anaasɛ sɛ RFID prelaminated inlay a chip ne antenna wom.
Thickness, krataa dimensions, card nhyehyɛe, surface finish, coating ahoɔden, RFID frequency, chip type, antenna design, printing compatibility, packaging, ne labeling betumi ayɛ customized ama OEM ne high-volume card production.
B2B customization: PETG overlay thickness ne wie, plain anaa RFID PET inlay, LF / HF / UHF frequency, chip model, antenna ade, krataa nhyehyɛe, kaad dodow wɔ krataa biara mu, wɔatintim dinkyerɛw agyiraehyɛde, packaging, ne OEM labeling.
| Adwadeɛ | PETG a wɔde akata so ne PET a wɔde ahyɛ mu ma kaad lamination |
| Nneɛma a Wɔde Kata So | PETG a ɛda adi pefee |
| Inlay Nneɛma a Wɔde Yɛ Adwuma | PET structure core anaa PET-gyina RFID prelaminated inlay |
| PETG Overlay no mu duru | 0.04mm–0.15mm na ɛwɔ hɔ; nea wɔtaa paw ne 0.06mm, 0.08mm, ne 0.10mm; customized thickness a ɛwɔ hɔ |
| PET Inlay a Ɛyɛ Fɛ | Wɔayɛ no sɛnea kaad nhyehyɛe a edi mũ no te; Wobetumi asusuw 0.25mm ne adwuma pɔtee bi a wobetumi apaw ho |
| Krataa no Kɛse | A4, A3, 295 × 460mm, 295 × 485mm, na wɔayɛ no sɛnea wɔpɛ |
| Kaad Nhyehyɛe | 2 × 5, 3 × 7, 3 × 8, 4 × 8, 5 × 5, 4 × 10, anaasɛ krataa a wɔde hyɛ obi so a wɔayɛ no sɛnea wɔpɛ |
| Nneɛma a Wɔpaw a Wɔde Kata So | Nkatasoɔ a wɔde akata so, nkatasoɔ a ɛyɛ den a wɔde kata so, nkatasoɔ a wɔmfa nkata so, nkatasoɔ a wɔde laserable kata so, katasoɔ matte, ne nkatasoɔ a ɛyɛ magnetic stripe |
| Surface Finish a Wɔde Awie | Ɛyɛ mmerɛw, ɛhyerɛn, ɛyɛ matte, frosted, anti-scratch, anaasɛ nea wɔayɛ no sɛnea wɔpɛ |
| PET Inlay Ɔkwan a Wɔfa so Yɛ | PET core a ɛnyɛ den, antenna nkutoo inlay, RFID pre-inlay, RFID prelaminated inlay, anaasɛ dual-frequency inlay |
| RFID Frequency Nneɛma a Wɔpaw | 125kHz LF, 13.56MHz HF/NFC, UHF, anaa dual-frequency nhyehyeɛ, a ɛgyina adwuma no ahwehwɛdeɛ so |
| Chip a Wobɛpaw | LF, HF, NFC, ne UHF chips a adetɔfo apaw anaasɛ adwuma no akamfo akyerɛ, a egyina sɛnea ɛwɔ hɔ ne akenkanfo a ɛne ne ho hyia so |
| Antenna a Wobɛpaw | Kɔbere waya antena, etched aluminium antenna, anaasɛ antenna nhyehyɛe a wɔayɛ no sɛnea wɔpɛ |
| Ahosuo | Nneɛma a wɔde kata so a ɛda adi pefee; fitaa, ɛyɛ mmerɛw, anaasɛ PET inlay nhyehyɛe a wɔayɛ no sɛnea wɔpɛ |
| Nnwuma a Wɔde Di Dwuma | ID kaad, RFID kaad, NFC kaad, akwan a wɔfa so kɔ hɔ, sikatua kaad, akwantuo kaad, adwumayɛfoɔ kaad, asɔremma kaad, ahɔhodan mu safe kaad, ne smart labels |
| OEM Nnwumayɛbea | Nneɛma, ne kɛse, ne kɛse, sɛnea wɔahyehyɛ, chip, frequency, antenna, nea wɔde kata so, nea ɛwɔ soro, tintim agyiraehyɛde, nneɛma a wɔde kyekyere, ne kokoam nkyerɛwde |
Ɛsɛ sɛ wɔsi nsusuwii a etwa to, ne kɛse, chip, antenna, frequency, akenkan adwumayɛ, coating, ne lamination parameters so dua denam mfiridwuma ho nkyerɛkyerɛmu ne adeyɛ nhwɛso a wɔapene so so.
PETG coated overlay ne PET inlay yɛ layers ahorow abien a wɔde di dwuma bom wɔ laminated plastic ne smart card adansi mu.
Wɔtaa de PETG a wɔde akata so no si kaad no anim ne akyi. Ɛbɔ adwinni a wɔatintim no ho ban na ɛboa ma wɔde abɔnten so ntoatoaso no bata emu kaad nhyehyɛe no ho bere a wɔde ɔhyew ayɛ no.
Wɔde PET inlay no si kaad no mu. Ebetumi ayɛ nhyehyɛe krataa a ɛnyɛ den, antenna-only layer, anaasɛ RFID prelaminated core a edi mũ a chip ne antenna wom. Ɛsɛ sɛ wosi nkyerɛase a ɛteɛ no so dua bere a wɔrebisa sɛ wɔmfa nsɛm a wɔafa aka no.
PETG yɛ polyester ade a wɔayɛ no glycol a wɔde di dwuma wɔ baabi a ɛho hia sɛ aniwa mu da hɔ, ɛyɛ den, ɛyɛ den, na ɛyɛ nea wotumi de ho to so. Wɔ kaad a wɔyɛ mu no, wobetumi de PETG sini a ɛda adi pefee adi dwuma sɛ ahobammɔ ne afɛfɛde a ɛwɔ soro.
Wɔde ade a wɔde kata so no gu ɔfã a ɛne kaad di nkitaho wɔ ade a wɔde kata so no so na ama abata nkrataa a wɔatintim a ɛne no hyia, PET ntoatoaso, PETG ntoatoaso, PVC ntoatoaso, anaa kaad nhyehyɛe a wɔabom ayɛ no ho yiye. Ɛsɛ sɛ wɔde coating grade no ne printing ink, card core, temperature, pressure, ne lamination cycle no hyia.
Overlay quality ka card no mu pefeeyɛ, gloss, flatness, printed-image visibility, peel ahoɔden, surface resistance, dimensional stability, ne finished-card appearance. Ɛsɛ sɛ adetɔfo de ink ne laminator ankasa no sɔ nea wɔde kata so no hwɛ sen sɛ wɔde wɔn ho bɛto nneɛma a wɔde di dwuma din nkutoo so.
PETG a ɛyɛ mmerɛw a wɔde akata so
PETG Overlay Krataa a wɔde yɛ Lamination
PETG a wɔde kata so a ɛda adi pefee ma mfonini ahorow a wɔatintim, ahyɛnsode ahorow, nsɛm, barcode ahorow, QR codes, data a ɛsakra, ne ahobammɔ mfonini ahorow kɔ so da adi pefee wɔ lamination akyi.
Fafa a ɛfata a wɔde akata so anaasɛ wɔde akata so denneennen ma nkitahodi a ɛda kaad a wɔde akata so ne nea wɔatintim no ntam no tu mpɔn, na ɛboa ma ɛtew peeling, anoano a wɔma so, bubbles, ne interlayer mpaapaemu so.
Nneɛma a wɔde kata so no bɔ nsɛm a wɔatintim ho ban fi aprannaa, nsu, nsateaa nkyerɛwee, efĩ, apereperedi, ne sɛnea wɔde di dwuma mpɛn pii bere a wɔde kaad di dwuma daa no ho.
Wobetumi asusuw glossy, smooth, matte, frosted, low-glare, anti-scratch, ne customized surface options ho sɛnea card design ne personalization nhyehyɛe no te.
Adetɔfo betumi apaw standard coated overlay, strong-coated overlay, non-coated overlay, laserable nneɛma, anaa magnetic stripe overlay sɛnea card nhyehyɛe ne dwumadie ahwehwɛdeɛ te.
PET inlay a ɛnyɛ den yɛ kaad a ɛwɔ mu a enni RFID chip anaa antenna. Ɛboa ma wɔkyekye kaad no mu duru a wɔhwehwɛ, mfiri nhyehyɛe, nsakrae, opacity, ne dimensional stability.
Antenna-only inlay no kura kɔbere anaa aluminium antenna nanso ɛnka chip nkitahodi a etwa to no ho. Ebia na wɔn a wɔyɛ no awie chip bonding anaa module assembly wɔ wɔn ankasa adwumayɛbea a wɔyɛ nneɛma no apaw.
RFID pre-inlay ka chip ne antenna a wɔapaw bom wɔ PET carrier so. Wɔayɛ no sɛ wɔde bɛkɔ so asakra, wɔde ahyɛ mu, anaa wɔabɔ no lamination ayɛ no smart card nhyehyɛe a edi mũ.
RFID inlay a wɔayɛ no prelaminated no kura chip ne antenna a wɔde ahyɛ card-core layers a wɔasiesie mu. Wɔn a wɔyɛ kaad no betumi de abɔ mu ne core sheets a wɔatintim ne PETG overlays ansa na wɔayɛ lamination ne punching a etwa to.
PET RFID Inlay Nhyehyɛe
Smart Card Inlay a wɔde yɛ Lamination
Wɔtaa susuw 125kHz LF inlay ho de kyerɛ sɛnea ɛbɛn, mfitiase akwan a wɔfa so kɔ hɔ, kɔ hɔ nkrataa, mmoa a wɔde kyerɛ, ahɔhodan nhyehyɛe, ne application ahorow a wɔde LF akenkanfo a ɛkɔ akyirikyiri a ɛne no hyia di dwuma.
Ɛsɛ sɛ chip a wɔpaw no ne adetɔfo no akenkanfo, data format, memory, akenkan nkutoo anaa nea wɔsan kyerɛw ahwehwɛde, ahobammɔ ahwehwɛde, ne system protocol hyia.
Wobetumi de 13.56MHz HF anaa NFC inlay adi dwuma de ahwɛ kwan a wɔfa so kɔ hɔ, ɔmanfo kar, nhomakorabea kaad, sukuupɔn kaad, asɔremma nhyehyɛe, nkyerɛkyerɛmu, nokwaredi, telefon so nkitahodi, ne sikatua adwuma a obiara nni nkitaho.
Ɛsɛ sɛ wɔpaw chip a wɔhwehwɛ no sɛnea akenkanfo platform a ɛfata, memory, encryption, authentication, protocol, akenkan kwan, adwumayɛ tebea, ne adansedi ahwehwɛde ahorow te.
Wobetumi asusuw UHF inlays ho ama kwan a wɔfa so hu nneɛma a ɛkɔ akyiri, agyapade sohwɛ, nneɛma a wɔde kɔ, kar a wɔde kyerɛ, nsɛm a esisi ho nhyehyɛe, nneɛma a wɔakora so, ne dwumadie a ɛhwehwɛ sɛ wɔkenkan nneɛma pii ntɛmntɛm.
Ɛsɛ sɛ wɔsi UHF frequency band, antenna design, chip, regulatory region, reader power, installation environment, nneɛma a atwa ho ahyia, ne akenkan kwan a wɔhwehwɛ no so dua ansa na wɔayɛ.
Dual-frequency inlay ka RFID mfiridwuma abien bom wɔ kaad adansi biako mu. Ebetumi aboa nhyehyɛe ahorow a ehia sɛ ɛne akenkanfo nhyehyɛe abien hyia, nanso chip ntam kwan, antenna nkitahodi, krataa nhyehyɛe, kaad no kɛse, ne kaad a wɔawie no adwumayɛ hwehwɛ sɛ wɔyɛ adwuma pɔtee bi.
Wɔ laminated smart card a wɔtaa yɛ mu no, PETG overlay no bɔ card no ani ho ban bere a PET inlay no ma emu nhyehyɛe anaasɛ contactless adwuma no ma. Ebia adansi a wɔayɛ no sɛnea wɔpɛ no bɛka nneɛma a edidi so yi ho:
Anim transparent PETG a wɔde akata so.
PET, PETG, PVC, anaa krataa a wɔde kaad-core a wɔabom ayɛ a wɔatintim wɔ anim.
Plain PET structure inlay anaa RFID PET inlay a chip ne antenna no wom.
Akyi a wɔatintim card-core krataa.
Akyi transparent PETG a wɔde akata so.
Wɔ lamination bere mu no, ɔhyew ne nhyɛso bond layers no ma ɛyɛ biako card nipadua. Ɔhyew a wɔapene so, nhyɛso, bere a wɔde yɛ ɔhyew, bere a wɔde yɛ onwini, akwankyerɛ a wɔde bɛboaboa ano, ne mprɛte a wɔde gyae no gyina nneɛma ne nnwinnade pɔtee a wɔde yɛ adwuma no so.
Sourcing overlay ne inlay sɛ nhyehyɛe a wɔayɛ no biako boa card manufacturers ma wɔhwɛ nneɛma a ɛne ne ho hyia, layer thickness, sheet nhyehyɛe, registration, ne adetɔ fi adetɔnfo biako hɔ.
Adan a wɔde laminated ayɛ no kata chip ne antenna no ho wɔ kaad no nipadua mu, na ɛboa ma wɔbɔ ɛlɛtrɔnik nneɛma ho ban fi sɛnea wɔde di dwuma daa, efĩ, aprannaa, ne nea ɛne ne ho di nkitaho tẽẽ no ho.
Transparent overlay ma nsɛm a wɔatintim no ntumi nhu, bere a emu inlay no ma card no mu duru, sɛnea wɔahyehyɛ, ne ɛlɛtrɔnik dwumadi a wɔhwehwɛ no ma.
Wɔn a wɔyɛ kaad no betumi ayɛ sɛnea wɔde kata so no kɛse, sɛnea wɔde inlay no te, chip no su, antenna no nsusuwii, krataa no nhyehyɛe, ɔfasu a wɔawie, agyiraehyɛde a wɔatintim, magnetic stripe, signature panel, anaa nneɛma afoforo a ɛyɛ adwuma no sɛnea wɔpɛ.
Nkratafa a wɔde ahyɛ mu a wɔadi kan asiesie no ma wotumi de kaad pii yɛ laminated na wɔbɔ no wɔ adeyɛ kyinhyia biako mu, na ɛma ɛyɛ pɛpɛɛpɛ na ɛtew hia a ehia sɛ wɔde chips ne antenna ahorow sisi hɔ mmiako mmiako bere a wɔreboaboa kaad no ano a etwa to no so.
Wobetumi asiesie PET RFID inlays ama adwumayɛfo kwan a wɔfa so kɔ hɔ ho nkrataa, ɔdan ho adansedi nkrataa, sukuupɔn no nkrataa, nsrahwɛfo nkrataa, kar a wɔde si kar, ahɔhodan kaad, ne beae a wɔabara ho adansedi krataa.
PETG overlay bɔ mfonini, din, nɔma, barcode, ne nsɛm a wɔatintim ho ban, bere a PET inlay no ma honam fam anaasɛ contactless card dwumadi a wɔhwehwɛ.
Wobetumi de akenkanfo ne akyi nhyehyɛe ahorow a ɛfata asusuw HF inlays a wɔayɛ no sɛnea wɔpɛ no ho wɔ akwantu, tekiti, kar ka a wogye, baabi a wɔde kar sisi, sukuupɔn no mu akwantu, ne akwantu nhyehyɛe ahorow ho.
Kaad-kaad nnwuma hwehwɛ chip, antenna, kaad-nipadua adansi, ankorankoro nhyehyɛe, adansedi, akenkanfo a ɛne ne ho hyia, ne payment-network pene a ɛfata. Nneɛma a wɔde ma nkutoo nkyerɛ sɛ wodi mmara a wɔawie no so.
Wobetumi de RFID anaa NFC dwumadie ahyɛ adetɔnbea nokwaredi nkrataa, apɔmuden kaad, club kaad, event card, nwomakorabea kaad, ahɔhoyɛ kaad, ne adetɔfoɔ asɔremma nhyehyɛeɛ mu.
NFC chips a ɛne no hyia betumi aboa mobile-device nkitahodi ama dijitaal adwuma kaad, nneɛma a wɔde di dwuma nokware, wɛbsaet a wɔde kɔ, nsɛm a esisi a wɔde wɔn ho hyɛ mu, asɔremma ho adansedi, anaa dwumadi afoforo a wɔayɛ ho nhyehyɛe.
Wobetumi de PET inlays ahyɛ kaad a contact chips, magnetic stripes, barcodes, QR codes, signature panels, holographic elements, anaa RFID mfiridwuma pii nso wom mu.
Si so dua sɛ kaad a wɔawie no nsusuwii, botae no kɛse, ne soro awie, kaad nkwa nna a wɔhwɛ kwan, baabi a wɔde di dwuma, ɔkwan a wɔfa so tintim, ɔkwan a wɔfa so yɛ ankorankoro, ne dwumadi ahorow a wɔhwehwɛ.
Ka sɛ ebia adwuma no hwehwɛ sɛ wɔde PET core a ɛyɛ plain structurel, antenna-only inlay, chip-and-antenna pre-inlay, anaasɛ prelaminated RFID inlay a edi mũ.
Fa akenkanfoɔ nhwɛsoɔ, dwumadie frequency, protocol, memory ahwehwɛdeɛ, ahobanbɔ ahwehwɛdeɛ, data format, akenkan kwan a wɔhwehwɛ, ne mprempren card anaa chip reference ma.
Paw chip no sɛnea nhyehyɛe no hyia na paw antenna nhyehyɛe a ɛfata kaad nhyehyɛe, chip capacitance, akenkan-akyiri ahwehwɛde, lamination tebea, ne nneɛma a atwa ho ahyia.
Si kaad dodow a ɛwɔ krataa biara mu, krataa no nsusuwii, agyiraehyɛde a wɔde kyerɛw wɔn din, antenna kwan, chip gyinabea, punching margin, beae a wɔatintim, ne abodwokyɛre a wɔhwehwɛ no so dua.
Fa card-core nneɛma, ink type, tintim kwan, curing kwan, print coverage, ne laminator tebea horow ma sɛnea ɛbɛyɛ a wobetumi asusuw standard anaa strong coating.
Fa printa, ink, laminator, punching machine, akenkanfo, encoder, mfiri a wɔde yɛ ankorankoro, ne ahwehwɛde ahorow a ɛfa kaad a wɔawie no yiye a wopɛ sɛ wode kata so ne nea wɔde ahyɛ mu no hwɛ.
Fa wo kaad nhyehyɛe, overlay thickness, PET inlay type, frequency, chip, antenna, krataa nhyehyɛe, tintim nhyehyɛe, dodow, ne baabi a worekɔ no mena ma womfa nyansahyɛ a ɛfa adwuma pɔtee bi ho.
Nya Nneɛma a Wɔkamfo KyerɛWɔyɛ PETG a wɔde kata so, kaad-core nkratafa a wɔatintim, ne PET a wɔde ahyɛ mu no ho nhyehyɛe, siesie, wɔhwehwɛ mu, na wɔhyehyɛ no sɛnea krataa nhyehyɛe ne kaad-layer mfonini a wɔapene so no te.
Ɛsɛ sɛ nkrataa a wɔatintim no de agyiraehyɛde a edi mu di dwuma sɛnea ɛbɛyɛ a mfonini ahorow, antena gyinabea, chips, nhama a wɔde twa, magnetic stripes, ne card anoano bɛkɔ so ayɛ pɛpɛɛpɛ.
Wɔde anim a wɔde kata so, nea wɔatintim no, PET a wɔde ahyɛ mu, akyi a wɔatintim no, ne akyi a wɔde kata so no ayɛ nea wɔaboaboa ano wɔ ɔkwan a wɔapene so no so. Ɛsɛ sɛ nneɛma a wɔde akata so no hwɛ bonding layers a ɛfata.
Ɔhyew ne nhyɛso a wɔahyɛ so no kyekyere ntoatoaso no bom. Ɛsɛ sɛ wɔde lamination aduannoa no si hɔ denam sɔhwɛ so efisɛ ɔhyew a ɛboro so, nhyɛso, anaa cycle bere betumi aka flatness, chip connection, antenna adwumayɛ, transparency, ne sheet shrinkage.
Wɔma nkratafa a wɔde laminated ayɛ no nwini wɔ tebea horow a wɔahyɛ so mu na ama kaad no nhyehyɛe no agyina na ɛtew warping, deformation, bubbles, ne uneven bonding so.
Wɔde nkratafa a wɔayɛ no laminated no bɔ kaad mu na afei wobetumi ayɛ tintim, encoding, laser marking, embossing, chip-module installation, magnetic encoding, signature-panel application, anaa nneɛma afoforo a wɔde wie.
Ɛsɛ sɛ wɔde akenkanfoɔ a wɔpɛ sɛ wɔsɔ RFID kaad hwɛ de si chip a wɔhunu, data nkitahodiɛ, antenna kɔ so, akenkan kwan, kwan a wɔfa so kɔ, encoding, ne system compatibility so dua.
Nneɛma ne coating-grade nokwaredi.
Thickness ne krataa-nsusuwii nhwehwɛmu.
Transparency, haze, gloss, ne surface-finish nhwehwɛmu.
Mfutuma, nsensanee, nwi, pinhole, ne efĩ a wɔhwehwɛ mu.
Coating uniformity ne coated-afã a wɔde hu.
Sɔhwɛ lamination, flatness, shrinkage, ne peel-ahoɔden nhwehwɛmu.
PET soa nneɛma, ne kɛse, ne nsusuwii, ne krataa-nhyehyɛe ho adansedi.
Chip model, dodow, gyinabea, ne orientation nokwaredi.
Antenna nsusuwii, nea ɛko tia, nea ɛkɔ so, nkitahodi, ne nhwehwɛmu a wɔde aniwa hu.
Chip-to-antenna bonding ne anyinam ahoɔden-dwumadi sɔhwɛ.
Surface flatness, encapsulation, bubble, ne amannɔne-nsu nketenkete nhwehwɛmu.
Akenkanfoɔ nkitahodi, UID akenkan, memory access, anaa encoding sɔhwɛ sɛdeɛ chip a wɔapaw no teɛ.
Finished nsusuwii ne ne kɛse.
Sɛnea ɛte wɔ soro, sɛnea emu da hɔ, ɛhyerɛn, ne sɛnea wotumi hu nea wɔatintim.
Layer bonding, ano a ɛbata ho, ahurututu, ne delamination.
Kaad a ɛyɛ tratraa, kotow, torsion, ne mfiri a wɔde di dwuma.
Chip akenkan, encoding, memory, antenna, ne akenkanfo a ɛne ne ho hyia.
Nhwehwɛmu a ɛfa sɛnea wɔde di dwuma pɔtee a ɛtra hɔ kyɛ, nneɛma a atwa yɛn ho ahyia, ne onyin ho sɔhwɛ ahorow wɔ baabi a ɛho hia.
Wallis boa PETG overlay a wɔayɛ no sɛnea wɔpɛ ne PET inlay production ma prototypes, pilot orders, nhyehyɛe a wɔayɛ sɛ bulk orders, ne bere tenten card-material supply nhyehyɛe ahorow.
Nneɛma a wɔyɛ no ntam nkitahodi betumi ayɛ nneɛma a wɔde siesie, nea wɔde kata so, krataa a wɔde twitwa, antenna a wɔyɛ, chip bonding, inlay assembly, anyinam ahoɔden nhwehwɛmu, krataa-nhyehyɛe sohwɛ, nneɛma a wɔde kyekyere, nkyerɛwde a wɔde bɛhyɛ, ne nkrataa a wɔde kɔ amannɔne.
PETG Overlay Nneɛma a Wɔyɛ
PET Inlay Nneɛma a Wɔyɛ
Wɔ coated overlay ne RFID inlay nneɛma akyi no, Wallis betumi ayɛ nhyehyɛe a ɛfa ho PET, PETG, PVC, polycarbonate, core krataa, printable krataa, magnetic stripe overlay, ne composite card-nneɛma ahwehwɛde.
PET Krataa a Wɔde Yɛ Kaad
PET Card Core Nneɛma a Wɔde Yɛ Adwuma
Ɛsɛ sɛ wɔbɔ PETG a wɔde kata so no ho ban fi mfutuma, nsensanee, nsu, kotow, nsateaa nkyerɛwee, ne efĩ ho. RFID inlays nso hwehwɛ ahobammɔ fi nhyɛso a ɛboro so, ɔhyew a wontumi nni so, static discharge, component damage, ne tebea a ɛmfata a wɔde sie ho.
Hohoro PE film anaa ahobammɔ mu ntama a wɔde kyekyere ho.
Kraft krataa a nsu ntumi nkɔ mu anaasɛ nneɛma a wɔde kyekyere nneɛma a wɔatoto mu.
Kartɔn a ɛyɛ tratraa, adaka a wɔahyɛ no den, nnua a wɔde ahyɛ mu, anaa pallet a wɔde kyekyere nneɛma.
Corner ne edge ahobammɔ na ama deformation so atew.
Nkratafa a wɔde yiyi nneɛma mu de bɔ chips, antenna, ne film no ani ho ban.
Lot nɔma, nneɛma, ne kɛse, chip, mpɛn dodow, nhyehyɛe, ne orientation labels.
OEM nkyerɛwde a wɔayɛ no sɛnea wɔpɛ, nneɛma a wɔde mena ho agyiraehyɛde, ne nneɛma a wɔde ahyɛ mu ho nsɛm.
Fa nneɛma a wɔatoto mu wɔ nea wɔde ahyɛ mu mfiase no sie baabi a ɛho tew, ɛhɔ yɛ kusuu, na wɔhwɛ ɔhyew so. Ma wɔntwe wɔn ho mfi owia hann tẽẽ, ɔhyew a ano yɛ den, nsu a ɛyɛ nwini dodo, nnesoa a emu yɛ duru, mfutuma, ne nnuru a ɛporɔw ho.
Wallis Card Nneɛma a Wɔde Sie
Wallis ne wɔn a wɔyɛ kaad, RFID converters, smart card adwumayɛbea, ahobammɔ printa, wɔn a wɔkyekyɛ, personalization centers, ne OEM adetɔfo a wɔhwehwɛ sɛ wɔyɛ nneɛma a wɔde kata so ne nea wɔde hyɛ mu a wɔayɛ no sɛnea wɔpɛ no yɛ adwuma.
PETG a wɔde kata so a ɛwɔ gyinabea biako, PET core, RFID inlay, ne card-material sourcing.
PET a ɛnyɛ den, antenna nkutoo, RFID pre-inlay, ne prelaminated inlay options.
LF, HF, NFC, UHF, ne nnwuma a ɛyɛ mpɛn abien a wɔayɛ no sɛnea wɔpɛ.
Chip, antenna, ne kɛse, krataa kɛse, ne kaad nhyehyɛe a wɔayɛ no sɛnea wɔpɛ.
Coated, strong-coated, matte, frosted, laserable, ne magnetic overlay options.
Prototype ne nhwɛsode mmoa ma lamination ne akenkanfo sɔhwɛ.
Nhwehwɛmu a ɛyɛ papa, lot traceability, export packaging, ne OEM labeling.
Fa wo kaad nhyehyɛe a woawie, nneɛma, ne kɛse, krataa nhyehyɛe, RFID mpɛn dodow, chip, antenna, ɔkwan a wɔfa so tintim, akenkanfo ho nsɛm, dodow a wɔabu akontaa, ne baabi a wɔde bɛkɔ no mena Wallis.
Bisa sɛ wɔmfa Custom Quotation mmaPETG overlay taa yɛ ahobammɔ layer a ɛda adi pefee wɔ laminated card anim anaa akyi. PET inlay yɛ emu nhyehyɛe anaa dwumadie layer na ebia ɛwɔ RFID chip ne antenna.
Dabi, PET inlay betumi ayɛ structure core a ɛnyɛ den a enni ɛlɛtrɔnik, inlay a antenna nkutoo na ɛwɔ mu, chip-and-antenna pre-inlay, anaasɛ RFID prelaminated inlay a edi mũ. Ɛsɛ sɛ adetɔfo kyerɛ ɔkwan a wɔhwehwɛ.
PETG overlay no wɔ hɔ fi bɛyɛ 0.04mm kosi 0.15mm. Nneɛma a wɔtaa paw no bi ne 0.06mm, 0.08mm, ne 0.10mm, bere a wobetumi asusuw ne kɛse a wɔayɛ no sɛnea wɔpɛ no ho sɛnea kaad no nhyehyɛe te.
Aane. Ɛsɛ sɛ wɔpaw PET inlay thickness sɛnea chip, antenna, card layers, finished-card thickness, lamination nhyehyɛe, ne mfiri ahwehwɛde te.
Dwumadie no akwan a wɔbɛpaw no betumi ayɛ 125kHz LF, 13.56MHz HF anaa NFC, UHF, ne dual-frequency nhyehyeɛ. Sɛnea wobetumi anya no gyina chip, antenna, nhyehyɛe, dodow, ne sɛnea wɔde bedi dwuma a wɔapaw so.
Aane. Fa chip din pɔtee, nea ɔyɛe, memory, protocol, ahobammɔ ahwehwɛde, akenkanfo mfonini, ne afe afe dodow ma. Wallis betumi asusuw sɛnea ɛwɔ hɔ ne sɛnea inlay no hyia ho.
Wobetumi asusuw kɔbere waya ne etched aluminium antenna a wobetumi apaw ho. Nsusuwii a ɛteɛ no gyina frequency, chip capacitance, card dimensions, akenkan kwan, ɔkwan a wɔfa so yɛ, ne ɛka a wɔde asi wɔn ani so.
Ebia nneɛma a wɔadi afra nhyehyɛe betumi aba bere a nea wɔde kata so, ink, ɔhyew a ɛma ɛyɛ mmerɛw, nea ɛtwetwe, nhyɛso, ne onwini tebea no hyia no. Ɛsɛ sɛ wɔsɔ nhwɛsode hwɛ ansa na wɔayɛ no kɛse.
Ebia wobetumi de biribi a ɛfata a wɔayɛ ho adwuma anaasɛ wobetumi atintim. Ɛsɛ sɛ wɔsɔ ink, ɔkwan a wɔfa so sa yare, gyinabea a wɔde tintim, bonding fã, transparency, ne lamination compatibility hwɛ.
Aane. Wobetumi ayɛ kaad dodow a ɛwɔ krataa biara mu, krataa no nsusuwii, antena gyinabea, chip gyinabea, nkyerɛwde a wɔde kyerɛw wɔn din, punching margins, ne card orientation sɛnea mfonini a wɔapene so te.
Sɔhwɛ betumi ayɛ antenna a ɛkɔ so, ɛko tia, chip bonding, chip a wɔkyerɛ, akenkanfo nkitahodi, UID akenkan, memory a wɔde kɔ, encoding, krataa nhyehyɛe, ne kɛse, ne aniwa a wɔde hwɛ.
Dabi Ahobammɔ gyina chip a wɔapaw, ɔkwan a wɔfa so di nokware, encryption, safe, akenkanfo nhyehyɛe, backend software, credential management, card personalization, ne system design nyinaa so.
Ebia wobetumi asan de PET ne PETG nneɛma adi dwuma denam nhyehyɛe a ɛfata a wɔde boaboa nneɛma ano na wɔyɛ ho adwuma so. Nanso, sɛnea wobetumi asan de kaad a wɔawie no di dwuma no gyina nneɛma a wɔde kata so, ink, nneɛma a wɔde nkata so, nneɛma a wɔde kata so, antenna, magnetic stripes, polymers a wɔadi afra, ne mpɔtam hɔ nneɛma a wɔde san de di dwuma bio so.
Aane. Wɔkamfo nhwɛsode ne pilot sɔhwɛ kyerɛ de hwɛ sɛ tintim, coating adhesion, layer bonding, card flatness, chip akenkan, antenna adwumayɛ, punching, personalization, ne akenkanfo nhyiam.
Yɛsrɛ sɛ fa nneɛma a wɔde kata so, ne kɛse, ne soro, nea wɔde kata so, nea wɔde ahyɛ mu, krataa no nsusuwii, sɛnea wɔde kaad no tintim, mpɛn dodow a wɔtaa yɛ, chip, antenna, ɔkwan a wɔfa so tintim, akenkanfo, dodow a wɔasusuw, nea wɔde ahyɛ mu, ne baabi a wɔde bɛkɔ no ma.
