|
Led kekeli ƒe ʋuƒo
Wallis ye nye esia
| Nusi wotsɔ wɔe: | |
|---|---|
| Agbɔsɔsɔ: | |
| viɖe: | |
| Agbɔsɔsɔ: | |
Wallis wɔa laser dot PMMA acrylic light guide plates (LGPs) siwo wowɔ ɖe ɖoɖo nu na LED-kaɖi siwo me kekeli le le nugbɔ, boblododo ƒe akaɖiɖakawo, asitsaƒewo ƒe ɖeɖefiawo, agbalẽdzraɖoƒe siwo me kekeli le, dzesiwo, dzisasrã ƒe akaɖiwo kple xɔtuɖaŋu ƒe akaɖidɔwo.
Wotrɔ asi le dometsotso ƒe nɔnɔme siwo wotsɔ laser kpa pɛpɛpɛ ŋu le PMMA ƒe anyigba dzi be woaɖe kekeli si zɔa mɔ to acrylic-kpa la me eye woamae ɖe teƒe si wobia be kekeli le. Woate ŋu atrɔ asi le dometsotso ƒe lolome, eƒe kpekpeme kple dometsotso ŋu le panel ƒe didime, LED ƒe nɔƒe, kekeli-si wotsɔ de eme ƒe mɔfiame kple dɔwɔwɔ ƒe nudidiwo nu.
Wallis doa alɔ 3–12 mm ƒe titrime, didime siwo wowɔ ɖe ɖoɖo nu, laser dot dɔwɔwɔ, V-lãɖeɖe, CNC lãɖeɖe, drilling, edge polishing kple ɖeka- alo eve-afã nukpɔkpɔ ɖoɖowo na prototype kple bulk LGP dɔwo.
Nusiwo gbɔna ƒe nɔnɔmewo ku ɖe Wallis laser-dot acrylic LGP ƒe hatsotso si li fifia ŋu. Ele be woatsɔ optical design mamlɛtɔ asɔ kple panel ƒe didime siwo wowu enu, LED ƒe ɖoɖowɔwɔ kple kekeli-si ƒe anyigba si hiã.
| Adzɔnuwo ƒe Ŋkɔ | Laser Dot PMMA Acrylic Kekeli Mɔfiame Kplu | Nudzadzra ŋkɔ | Wallis ye nye esia |
| Nu | Nukpɔkpɔ ƒe PMMA Acrylic | Eƒe titrime | 3–12 mm ƒe didime |
| Nusiwo Wozãna ƒe Agbɔsɔsɔme | 1220 × 2440 ƒe lolome | Agbɔsɔsɔ si Wowu Nu | Wotrɔ asi le eŋu wòsɔ ɖe Dɔa ƒe Nudidiwo nu |
| Kekeli ƒe Mɔɖeɖe | Vaseɖe 93% na PMMA Nusiwo Me Kɔ si Wogblɔ | Dɔwɔwɔ tso eŋu | Laser Dots / V-Lãɖeɖe Fliwo |
| Nukpɔkpɔ ƒe Anyigba | Akpa Ðeka / Akpa Eve | MOQ | 1 Akpa |
| Awuwɔwɔ si wowɔ ɖe ɖoɖo nu | CNC Lãɖeɖe / Kuku / Nugbɔ Polishing / Nɔnɔme Dɔwɔwɔ | Nusiwo wobla ɖe agba me | Kakɛ / Atiɖaka |
| Zãzã Gbãtɔ | Akaɖi / Dzesiwo / Nukpɔkpɔwo / Atsyɔ̃ɖoɖo | Teƒe si Wotso | Shanghai, China |
Woɖoa LED-ka alo modules ɖe teƒe si te ɖe PMMA nugbɔ ɖeka alo esi wu nenema si wowɔ nyuie ŋu. LED ƒe dodo ƒe anyigba kple acrylic ƒe nugbɔ dome sɔsɔ nyuie kpena ɖe kekeli ƒe kadodo ɖe ʋuƒoa me ŋu wònyona ɖe edzi.
Ne kekeli nya ge ɖe acrylic la me ko la, etoa ʋuƒoa me. Panel ƒe titrime, didime, goawo ƒe nyonyome kple goawo ƒe xexlẽme si me kekeli le kpɔa ŋusẽ ɖe alesi kekeli ate ŋu ato LGP la me nyuie dzi.
Nu suesuesue siwo wotsɔ laser kpa la doa kplamatse kekeli ƒe mɔ ememetɔ eye woɖea kekeli ƒe akpa siwo dzi wokpɔna to ʋuƒoa ƒe anyime. Kpɔɖeŋua ate ŋu ava nɔ ʋeʋẽm vivivi le didiƒe ʋĩ tso LED-tsoƒea gbɔ be wòaxe kekeli si bu le agbalẽa dzi la teƒe.
Le akaɖi ƒe ƒuƒoƒo geɖe siwo le axa ɖeka me la, LGP wɔa dɔ ɖekae kple megbe ƒe keklẽŋusẽ kple ŋgɔgbe ƒe akaɖi. Akpa siawo kpena ɖe ame ŋu wòtrɔa kekeli si womezã o eye wònaa kekeli si wokpɔna la nɔa blɔ. Ele be woada ŋku ƒe wɔwɔme mamlɛtɔ kpɔ abe ɖoɖo blibo ene tsɔ wu be woada LGP ɖeɖeko kpɔ.
Acrylic LGP Dɔwɔwɔ vovovowo
Edge-Lit LGP Dɔwɔɖoɖo ƒe Gɔmeɖose
Mele be woatsɔ acrylic ƒe titrime ko atia mɔfianu si me kɔ o. Be woawɔ ɖeka nyuie wu la, ele be woawɔ nukpɔkpɔ ƒe nɔnɔmetata la aƒo xlã LED-kaɖi ƒe ɖoɖo bliboa.
Akpa gãwo hiã kekeli hafi woate ŋu azɔ mɔ didi wu. Eyata panel ƒe didime kple kekeme kpɔa ŋusẽ ɖe dot-density gradient, input ƒe goawo ƒe xexlẽme kple PMMA titrime si sɔ dzi.
Wallis naa 3–12 mm LGP ƒe titrime. Titrime si sɔ nɔ te ɖe panel ƒe didime, LED package ƒe kɔkɔme, xɔtuɖaŋu ƒe nudidiwo kple teƒe si li si woatsɔ aɖoe dzi.
LED ƒe dometsotso kple didime si le LED-babla ɖekaɖekawo dome ate ŋu akpɔ ŋusẽ ɖe ka siwo klẽna le ʋuƒoa ƒe go gbɔ dzi. LED strip alo module ƒe nɔnɔme si woɖo be woana nana kpena ɖe LGP ƒe nɔnɔme ŋu be wòasɔ kple kekelitsoƒe ŋutɔŋutɔ.
LGP ateŋu axɔ kekeli tso go ɖeka, eve alo geɖe gbɔ le dɔa nu. Woate ŋu akpɔ viɖe tso akpa siwo le nɔnɔme gã me ƒe nugbɔ bubuwo me ne LED ƒe nugbɔ ɖeka mate ŋu ana mɔzɔzɔ ƒe didime alo ɖekawɔwɔ si hiã o.
Ele be woatrɔ asi le dometsotsowo ƒe dometsotso kple woƒe kpekpeme ŋu le didime si tso LED-awo gbɔ nu. Dɔa koŋ ƒe ʋuʋudedi kpena ɖe teƒe siwo klẽna wu siwo te ɖe kekelitsoƒea ŋu kple teƒe siwo didi tso nugbɔ si me kekeli le gbɔ la dadasɔ.
Ele be kekeli ƒe nugbɔ nanɔ dzadzɛ eye wòakɔ nyuie be wòado alɔ kadodo nyuie le LED-awo kple PMMA panel dome. Nugbɔ ƒe nɔnɔme le vevie ŋutɔ na kekeli ƒe mɔfiafia didi.
Wallis ate ŋu ado alɔ akpa ɖeka alo akpa eve ƒe nukpɔkpɔ ƒe ɖoɖowo. Ele be woatia reflector, diffuser kple dot ƒe ɖoɖo le anyigba siwo woɖo be woaɖe kekeli la nu.
Laser-dot matrix si wowɔ nyuie kpena ɖe eŋu be woama nugbɔ ƒe keklẽ ɖe akpaa dzi tsɔ wu be wòaƒo keklẽ nu ƒu ɖe LED-ka la xa. Esia ɖea keklẽ ƒe vovototo siwo wokpɔna tso titina vaseɖe nugbɔ dzi kpɔtɔna eye wòdoa alɔ anyigba si dzi kekeli le si le dzadzɛ wu.
Esi wònye be woɖo LED-wo ɖe ʋuƒoa ƒe go kemɛ dzi tsɔ wu be woaɖo wo ɖe teƒe si kekeli blibo le megbe tẽ ta la, LGP ate ŋu ado alɔ akaɖiɖaka siwo le tsɛ wu, nukpɔkpɔ ƒe akpawo kple xɔtuɖaŋu ƒe akaɖiwo ƒe ƒuƒoƒo.
Woate ŋu atrɔ asi le laser dot density ŋu le teƒe vovovowo le agbalẽvi ɖeka dzi be wòaxe fe ɖe kekeli ƒe ɖiɖi ta eye wòawɔ ɖe dɔa koŋ ƒe kekeli ƒe nudidiwo dzi.
PMMA nusi me kɔ si wogblɔ la naa kekeli ƒe kaka si ade 93%. Asixɔxɔ sia fia acrylic-nu la ŋutɔ; finished-system ƒe keklẽ kple optical efficiency hã nɔ te ɖe LEDs, dot pattern, dzidzeme, reflector kple diffuser ƒe ɖoɖo dzi.
Woate ŋu atrɔ asi le panel ƒe didime, nɔnɔme, do, slots, notches kple polished edges ŋu le asisiwo ƒe nɔnɔmetatawo kple kpekpe ƒe nudidiwo nu.
Wallis doa alɔ laser-dot kple V-lãɖeɖe siaa ƒe dɔwɔwɔ. Nuɖeɖe ƒe wɔwɔme si sɔ nɔ te ɖe panel geometry, kekeli ƒe mɔfiame kple nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi si wodi dzi.
| Tsɔtsɔ sɔ kple | Laser Dot Dɔwɔwɔ | V-Cutting Dɔwɔwɔ |
|---|---|---|
| Nukpɔkpɔ ƒe Dɔwɔɖoɖo | Microdot ƒe Matrix | Fli alo Do siwo le abe V ene siwo sɔ pɛpɛpɛ |
| Kpɔɖeŋu Dziɖuɖu | Dot Density Ate Ŋu Ato Vovo Le Panel la Katã Me | Woate Ŋu Atrɔ Asi Le Fli ƒe Mɔfiame Kple Dometsotso Ŋu Trɔ Asi Le Wo Ŋu |
| Zãzã si Wozãna Zi geɖe | General Edge-Lit Kekeli Aɖakawo, Nukpɔkpɔwo kple Panels | Dɔ Siwo Bia be Woaɖe Mɔfiame alo Fli Dzi Ðeɖe |
| Tiatiawɔwɔ | Wotue ɖe Panel ƒe Agbɔsɔsɔme, LED Ðoɖowɔwɔ kple Ðekawɔwɔ Taɖodzinu dzi | Wotue ɖe Nukpɔkpɔ ƒe Mɔfiame Kple Mɔ̃ɖaŋununya ƒe Aɖaŋu dzi |
Laser-dot LGPs ate ŋu ama LED-kaɖi si wotu ɖe nugbɔ dzi le nɔnɔmetatawo, nɔnɔmetatawo, menu boards kple boblododowo ƒe ɖeɖefiawo megbe esime wole asi kpem ɖe kekeli-aɖaka ƒe wɔwɔme si le tsɛ vie ŋu.
Woate ŋu atsɔ acrylic LGP siwo wowɔ ɖe ɖoɖo nu awɔ ɖekae ɖe agbalẽdzraɖoƒewo, nudzraɖoƒewo, kabinetwo kple asitsatsa ƒe nuzazãwo me le afisiwo wòhiã be woatsɔ akaɖi tsɛ aɖe aɖo wo dzi le.
Kekeli ƒe mɔfianu gbadzɛ siwo ŋu kekeli le le goawo dzi ate ŋu ado alɔ nuɖuɖu ƒe kplɔ̃ siwo dzi kekeli sɔsɔe, nyatakakadzesiwo kple mɔfiame ƒe nɔnɔmetatawo le nuɖuɖudzraƒewo, asitsaƒewo kple dutoƒo teƒewo.
PMMA Woateŋu atsɔ LGPwo ade dzisasrã ƒe akpa tsɛwo, gli ƒe nɔnɔme siwo me kekeli le, xɔmenuwo kple xɔtuɖaŋu ƒe akaɖi ƒe ƒuƒoƒo bubuwo me.
Nukpɔkpɔ ƒe ɖoɖo gãwo ateŋu azã LGP siwo wowɔ ɖe ɖoɖo nu afisi wowɔ dɔa ƒe didime, LED ƒe ɖoɖo kple nukpɔkpɔ ƒe ɖoɖowɔwɔ na xɔtunu tɔxɛa.
Woate ŋu ada kekeli ƒe mɔfiame gbadzɛ siwo wowɔ ɖe ɖoɖo nu hã kpɔ na nu tɔxɛ siwo woɖena fiana, dziɖuɖu ƒe ʋuƒo kple dɔ bubu siwo hiã be woaɖe kekeli si dzi wokpɔna tso nukpɔkpɔ ƒe agbalẽvi si me kekeli le le nugbɔ me.
Asitsatsa ƒe Akaɖiwo Ŋuti Dɔwɔnawo
Xɔtuɖaŋu ƒe Akaɖiwo ƒe Dɔwɔnawo
Mɔ̃ɖaŋununya ƒe didime le vevie abe alesi nukpɔkpɔ ƒe dɔwɔwɔ le vevie ene ne ele be LGP nasɔ ɖe kekeli-ɖaka ƒe xɔtunu alo LED ƒe ƒuƒoƒo si li xoxo me.
Woate ŋu awɔ dɔ tso didime kple kekeme si wowɔ vɔ ŋu le asisiwo ƒe nɔnɔmetatawo nu le nusiwo wotsɔ wɔe ƒe didime siwo li kple ewɔwɔ ƒe ŋutete me.
Woateŋu azã CNC mɔ̃wo atsɔ awɔ gota gome nɔnɔmetata siwo wowɔ ɖe ɖoɖo nu, ʋɔtruwo, dowo kple mɔ̃ɖaŋununya ƒe nɔnɔme bubu siwo akaɖi ƒe ƒuƒoƒoa hiã.
Woate ŋu ade do siwo woatsɔ aɖoe kple ʋuƒo bubuwo eme le nɔnɔmetatawo nu, ne womedo kplamatse teƒe vevi siwo kekeli fiaa mɔe o.
Woate ŋu akɔ kekeli ƒe gowo ŋu be woana nukpɔkpɔ ƒe kadodo nanyo ɖe edzi, evɔ woate ŋu awɔ dɔ tso kekeli ƒe nugbɔ siwo menye nusi wotsɔ dea eme o ŋu le kekeli ƒe keklẽ mamlɛtɔ kple xɔtunu ƒe nɔnɔme nu.
Ne woŋlɔ MOQ si nye akpa ɖeka la, woate ŋu ada kpɔɖeŋu aɖe kpɔ kple LED-ka siwo woɖo be woawɔ, reflector, diffuser kple mechanical frame hafi woaɖo kpe ewɔwɔ ƒe agbɔsɔsɔ gãwo dzi.
Kekeli ƒe mɔfianu ƒe agbalẽvi nye nukpɔkpɔ ƒe akpa si le PMMA ƒe akpa si le akaɖi ƒe ɖoɖo si me kekeli le le nugbɔ me. Mele be woabui le eɖokui si abe LED-kaɖi bliboa ene o.
Akaɖi ƒe kpekpe blibo ate ŋu abia hã be LED-ka alo modules, reflector material, diffuser sheets, aluminum frame, wiring, power supply kple mounting components. Ne wò dɔa bia nu geɖe wu acrylic LGP si ŋu wotrɔ asi le la, gblɔ kpekpe ƒe nudidi bliboa ne èle biabiam be woaxe fe ɖe eta.
Le laser-dot LGP si wowɔ ɖe ɖoɖo nu gome la, nukpɔkpɔ kple mɔ̃ɖaŋu ŋuti nyatakakawo nana ɖekae kpena ɖe ame ŋu be woaɖe asitɔtrɔ siwo wowɔna enuenu dzi akpɔtɔ eye wònaa dɔa ƒe dodokpɔ nyona ɖe edzi.
Agbɔsɔsɔ si wobia tso ame si
Wowu didime kple kekeme nu
PMMA ƒe titrime si wobia
CAD alo didime ƒe nɔnɔmetata
LED strip alo LED module ƒe nɔnɔme
LED ƒe gbeɖiɖi kple agbalẽvi ƒe didime
Kekeli ƒe goawo ƒe xexlẽme kple afisi wole
Akpa ɖeka alo axa eve ƒe kekeli ƒe dodo
Laser dots alo V-lãɖeɖe ƒe didi
Dowo, ʋuƒo alo nɔnɔme siwo wowɔ ɖe ɖoɖo nu siwo hiã
Reflector kple diffuser ƒe ɖoɖowɔwɔ, ne wonya
Bare LGP plate alo blibo akaɖi kpekpe nudidi
Taɖodzinu ƒe dɔwɔwɔ kple eɖoɖo ƒe nɔnɔme
Woate ŋu atrɔ asi le laser dot ƒe nɔnɔmewo ŋu le panel ƒe didime nu, LED ƒe ɖoɖo, kekeli-deƒe mɔfiame kple teƒe si kekeli si hiã.
PMMA ƒe titrime ƒe tiatia geɖewo ɖea mɔ be woatsɔ LGP la asɔ kple LED ƒe akpa vovovowo, panel ƒe didime kple xɔtuɖoɖo ƒe nudidiwo.
CNC woateŋu atsɔ lãɖeɖe, tomekuku, nɔnɔme siwo wowɔ ɖe ɖoɖo nu kple nugbɔ ƒe ʋuʋu aƒo ƒu kple optical dot pattern le asisiwo ƒe nɔnɔmetatawo nu.
MOQ si woŋlɔ ɖi si nye akpa ɖeka la ɖea mɔ na nuƒlelawo be woada kpɔɖeŋu siwo wowɔ ɖe ɖoɖo nu kpɔ hafi aɖo kpe nuwɔwɔ ƒe nudidi gãwo dzi.
Wallis doa alɔ LGP dɔ siwo wowɔ ɖe ɖoɖo nu na LED-kaɖiwo wɔlawo, akaɖi-ɖaka wɔlawo, dzesiwo dɔwɔƒewo, nukpɔkpɔwo dzralawo, asitsahawo kple asitsalawo ƒe nuƒlela bubuwo.
LGP dɔ siwo wowɔ ɖe ɖoɖo nu ate ŋu anye PMMA lãɖeɖe, laser-dot dɔwɔwɔ, V-lãɖeɖe, CNC wɔwɔ, nugbɔ kɔklɔ, dzadzɛnyenye, ŋkuléle ɖe nu ŋu kple ametakpɔnu dɔdɔ ƒe nubablawo le sedede ƒe nɔnɔme si ŋu woɖo kpee nu.
PMMA kekeli ƒe mɔfiamegbalẽ nye optical acrylic panel si wowɔ be wòaxɔ LED kekeli tso go ɖeka alo esi wu nenema gbɔ eye wòama kekeli ma ɖe anyigba si lolo wu dzi to laser dots, fli siwo wokpa alo kekeliɖeɖe ƒe xɔtunu bubuwo dzi.
Ɛ̃. Le adzɔnuwo ƒe hatsotso sia me la, LGP tsi tre ɖi na Light Guide Plate. 'LPG' le acrylic akaɖi ƒe adzɔnu ƒe tanya me nyea ŋɔŋlɔdzesiwo ƒe tɔtrɔ zi geɖe eye ele be woaɖɔe ɖo ɖe LGP hena mɔ̃ɖaŋununya ƒe nyateƒetoto kple didi ƒe vevienyenye.
Kekeli zɔa mɔ to PMMA me tso LED ƒe nugbɔ. Laser-dotwo doa kplamatse kekeli si wofia mɔe eye woɖea akpa siwo dzi wokpɔna to ʋuƒoa ƒe anyime. Asitɔtrɔ le dot density ŋu le plate la dzi kpena ɖe ame ŋu wòxea kekeli ƒe sesẽme si dzi ɖena kpɔtɔna le didiƒe tso LED-awo gbɔ.
Wallis yɔ atike sia ƒe titrime tso milimeta 3 va ɖo milimeta 12. Titrime si sɔ nɔ te ɖe panel ƒe lolome, LED package ƒe didime, kekeli-mɔzɔzɔ ƒe didime kple xɔtuɖoɖo ƒe nudidiwo dzi.
Ao. Asixɔxɔ si woŋlɔ ɖi la fia kekeli ƒe kaka le PMMA nusi me kɔ si wogblɔ la me. Finished ɖoɖo ƒe dɔwɔwɔ nyuie kple keklẽ hã nɔ te ɖe LED coupling, panel didime, dot kpɔɖeŋu, reflectors, diffusers kple bubu optical bu.
Ɛ̃. Woateŋu atsɔ dot ƒe kpekpeme asɔ kple LGP ƒe lolome si wowu enu, PMMA ƒe titrime, LED ƒe nɔƒe, LED ƒe kɔkɔme, goawo ƒe xexlẽme kple kekeli ƒe mɔfiame si hiã.
Laser-dot dɔwɔwɔ zãa microdots ƒe matrix tsɔ ɖea kekeli le panel la dzi, gake V-cutting ya zãa linear grooves. Tiatia nɔ te ɖe panel geometry, kekeli ƒe mɔfiame kple optical effect si wodi dzi.
Axa ɖeka ƒe nugbɔ ƒe akaɖi ƒe mɔ̃ geɖe zãa nusi naa kekeli le LGP megbe tsɔ trɔa kekeli yia teƒe si wokpɔa nu le. Akpa eve ƒe dɔwɔwɔ siwo me kɔ ate ŋu azã nukpɔkpɔ ƒe wɔwɔme bubu, eyata ele be woada kpekpe bliboa kpɔ le nusi woɖo be woawɔ nu.
Kekeli ƒe nugbɔ si le gbadzaa, si me kɔ la kpena ɖe LED-kaɖi ŋu be wòaƒo ƒu ɖe acrylic la me nyuie wu. Nugbɔ siwo le gbadzaa alo esiwo gblẽ ate ŋu ana kaka si womedi o kple nukpɔkpɔ ƒe bu nadzi ɖe edzi.
Ɛ̃. Le panel ƒe didime kple keklẽ ƒe nudidiwo nu la, woate ŋu aɖo LED-wo ɖe go eve alo esi wu nenema dzi. Emegbe ele be woawɔ laser-dot ƒe ɖoɖoa aƒo xlã input-edge ƒe ɖoɖo si wotia.
Ɛ̃. CNC woateŋu aƒo nu tso lãɖeɖe, tomekuku, nɔnɔmetata siwo wowɔ ɖe ɖoɖo nu, ʋɔtruwo kple nugbɔ ƒe dɔwɔwɔ ŋu le asisiwo ƒe nɔnɔmetatawo kple nukpɔkpɔ ƒe nudidi siwo le panel la si nu.
Nu vevitɔ si ŋu woƒo nu tsoe le afisiae nye PMMA acrylic kekeli ƒe mɔfianu si ŋu wotrɔ asi le. Ne LED, reflector sheets, diffuser sheets, frames, wiring alo akpa bubuwo hiã la, ŋlɔ wo ɖe vovo ale be woate ŋu aɖo kpe assembly scope bliboa dzi.
MOQ si woŋlɔ ɖi fifia nye akpa ɖeka, si na be nuƒlelawo te ŋu daa kpɔɖeŋu si wowɔ ɖe ɖoɖo nu la kpɔ hafi tsɔ wo ɖokui na be yewoawɔ nudɔdɔ si lolo wu.
Adzɔnuwo ŋuti nyatakaka siwo li fifia yɔ dɔwɔŋkeke siwo ade 3–7 na kpɔɖeŋuwo kple abe kwasiɖa 2–5 ene na ewɔwɔ le agbɔsɔsɔ gã me, le agbɔsɔsɔ kple alesi wowɔe ɖe ɖoɖo nu nu. Ele be woagbugbɔ aɖo kpe ɣeyiɣi mamlɛtɔ si woatsɔ awɔ dɔa dzi kple dɔa ƒe nyayɔyɔ.
Taflatse na agbɔsɔsɔme, dzidzeme siwo wowu enu, titrime, CAD nutata, LED ƒe kpɔɖeŋu alo strip ƒe nɔnɔme, LED ƒe gbeɖiɖi, xexlẽme si me kekeli le goawo, dodo ƒe mɔfiame, laser-dot alo V-tso ƒe didi kple do ɖesiaɖe, slots alo mɔ̃ bubu ƒe nudidiwo.
Didi be yeawɔ laser dot acrylic kekeli mɔfianu agbalẽvi si wowɔ ɖe ɖoɖo nu, PMMA LGP alo edge-lit LED light guide panel ? Ðo Wallis wò panel ƒe nɔnɔmetata, eƒe titrime, LED ƒe nɔnɔme, kekeli-nugbɔ ƒe ɖoɖowɔwɔ kple agbɔsɔsɔme na optical kple nuwo wɔwɔ ƒe dodokpɔ.
