|
Kekeli ƒe Mɔfiamegbalẽ
Wallis ye nye esia
| Agbɔsɔsɔ: | |
|---|---|
Wallis wɔa PMMA acrylic kekeli mɔfiame gbadzɛwo (LGPs) siwo wowɔ kple laser ƒe dzesi siwo sɔ pɛpɛpɛ na LED kekeliɖakawo, boblododowo ƒe ɖeɖefiawo, asitsaƒewo ƒe agbalẽdzraɖoƒewo, dzisasrã ƒe akaɖiwo, nuɖuɖu ƒe kplɔ̃wo kple dɔ bubu siwo me kekeli le le nugbɔ. Optical dot pattern la trɔa mɔ na kekeli si gena ɖe eme tso panel la ƒe go kemɛ dzi eye wòmaae ɖe anyigba si dzi kekeli le la dzi hena keklẽ si me kɔ, si mewɔa tɔtrɔ o.
Available in 3–12 mm thicknesses , custom dimensions and single- or two-sided visual configurations, woate ŋu atsɔ PMMA LGP ɖesiaɖe asɔ kple panel ƒe lolome, LED ƒe nɔƒe, kekeli-de-nugbɔ kple dɔwɔwɔ si hiã. Wallis hã doa alɔ laser dotting, V-lãɖeɖe, CNC lãɖeɖe, drilling, nugbɔ polishing, dzadzɛnyenye kple export packaging na OEM kple dɔa ƒe sededewo.
Bia be woawɔ LGP ƒe Nyatakaka si Wowɔ Ðe Ðoɖo Nu
| Adzɔnuwo ƒe Ŋkɔ | PMMA Acrylic Kekeli Mɔfiame Kplu | Nudzadzra ŋkɔ | Wallis ye nye esia |
| Nu | PMMA ƒe akrilik | Eƒe titrime | 3–12 mm ƒe didime |
| Nusiwo Wozãna ƒe Agbɔsɔsɔme | 1220 × 2440 ƒe lolome | Agbɔsɔsɔ si Wowu Nu | Wotrɔ asi le eŋu wòsɔ ɖe nɔnɔmetatawo nu |
| Kekeli ƒe Mɔɖeɖe | Vaseɖe 93% na PMMA nusi me kɔ si wogblɔ | Dɔwɔwɔ ƒe Mɔnu | Laser-dots alo V-tso fliwo |
| Nukpɔkpɔ ƒe Anyigba | Akpa ɖeka alo axa eve | Nudɔdɔ ƒe Agbɔsɔsɔ Suesuetɔ | 1 ƒe akpa aɖe |
| Awuwɔwɔ si wowɔ ɖe ɖoɖo nu | CNC lãɖeɖe, tomekuku, polishing kple nugbɔ dɔwɔwɔ | Nusiwo wobla ɖe agba me | Kakɛ kple atiɖaka |
| Zãzã Gbãtɔ | Akaɖiwo, dzesiwo kple ɖeɖefiadɔwo | Teƒe si Wotso | Shanghai, China |
Woɖoa LED-ka alo modules ɖe teƒe si te ɖe panel ƒe go ɖeka alo esi wu nenema si wowɔ nyuie ŋu. LED-kaɖitsoƒe kple PMMA ƒe nugbɔ dome sɔsɔ nyuie nana kekeli ƒe kadodo nyona ɖe edzi eye wòɖea nukpɔkpɔ ƒe bu si woate ŋu aƒo asa na dzi kpɔtɔna.
PMMA ƒe akpaa fiaa mɔ kekeli si gbɔna la to eƒe anyigba dzi. Panel ƒe titrime, eƒe didime, nugbɔ ƒe nɔnɔme, LED ƒe gbeɖiɖi kple kekeli ƒe goawo ƒe xexlẽme katã kpɔa ŋusẽ ɖe afisi kekelia zɔna ɖo kple alesi ɖoɖo mamlɛtɔa wɔa dɔe dzi.
Laser-dote siwo ŋu kɔmpiuta wɔ la doa kplamatse kekeli ƒe mɔ ememetɔ eye wòfiaa kekeli ƒe akpa siwo dzi wokpɔna la doa goe to ʋuƒoa ƒe anyime. Woateŋu atrɔ asi le dometsotso ƒe lolome, goglome kple dometsotso ŋu le didime si le LED dzɔtsoƒea gbɔ nu be woaɖe keklẽ ƒe ka siwo woate ŋu akpɔ, teƒe siwo do viviti kple keklẽ ƒe vovototo siwo le titina vaseɖe nugbɔ dzi akpɔtɔ.
Laser dot ɖoɖo si wowɔ koŋ kpena ɖe eŋu be woama nugbɔ kekeli ɖe akpa bliboa dzi tsɔ wu be wòaƒo keklẽ si te ɖe LED-kaɖiawo ŋu nu ƒu. Esia doa alɔ nukpɔkpɔ ƒe emetsonu si le dzadzɛ wu na nɔnɔmetatawo, dzesiwo, agbalẽdzraɖoƒewo kple atsyɔ̃ɖoɖo ƒe akaɖiwo.
Esi wònye be woda LED-awo ɖe ʋuƒoa ƒe go kemɛ dzi ta la, PMMA LGP ate ŋu ado alɔ akaɖiɖaka tsɛwo, dzesi suewo, agbalẽdzraɖoƒe siwo me kekeli le kple nukpɔkpɔ ƒe xɔtunu siwo mebɔ o le afisiwo megbekaɖi goglo si bɔ mesɔ o.
Wallis ate ŋu atrɔ asi le panel ƒe didime, kekeme, titrime, nɔnɔme, do ƒe nɔƒe, slots, notches, kekeli-de nu goawo, laser dot density, emitting mɔfiame kple nugbɔ atikewɔwɔ le nuƒlela ƒe nɔnɔmetata kple kpekpe ƒe ɖoɖo nu.
Ne nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake nye akpa ɖeka la, asisiwo ate ŋu ada kpɔɖeŋu aɖe kpɔ to LED siwo woɖo be woawɔ, reflector, diffuser, frame kple dɔwɔwɔ ƒe nɔnɔmewo zazã me hafi aɖo kpe ewɔwɔ ƒe nudɔdɔ si lolo wu dzi.
Asitsaƒewo ƒe Agbalẽdzraɖoƒe ƒe Akaɖiwo
Dzisasrã ƒe Akaɖiwo
LED boblododo ƒe akaɖiɖakawo kple agbalẽvi siwo dzi kekeli le
Asitsaƒewo ƒe agbalẽdzraɖoƒe ƒe akaɖiwo, nukpɔkpɔwo kple nukpɔkpɔwo ƒe kabinetwo
Menu boards, mɔ didi ƒe dzesiwo kple megbeklẽ ƒe nɔnɔmetatawo
Dzisasrãwo kple akaɖi siwo wotsɔ ɖo atsyɔ̃ na xɔa me
SEG avɔ ƒe akaɖiɖakawo kple ɖeɖefiawo ɖeɖefia
Asitsaƒewo ƒe xɔmenuwo, xɔmenuwo siwo me kekeli le kple xɔtuɖaŋu ƒe nɔnɔmewo
| Tsɔtsɔ sɔ kple wo nɔewo | Laser Dot Dɔwɔwɔ | V-Cutting Line Dɔwɔwɔ |
|---|---|---|
| Nukpɔkpɔ ƒe Dɔwɔɖoɖo | Microdot matrix si dzi wokpɔna si wokpa ɖe akpata la dzi | Do alo fli siwo le abe V ene pɛpɛpɛ |
| Aɖaŋuɖoɖo Dzikpɔkpɔ | Dot density ateŋu ato vovo le didime tso LED dzɔtsoƒea gbɔ | Groove ƒe mɔfiame ate ŋu akpɔ kekeli ƒe ɖeɖe le mɔ siwo woɖe fia dzi |
| Zãzã si Bɔe | General light boxes, display panels, agbalẽdzraɖoƒewo kple nɔnɔme siwo wowɔ ɖe ɖoɖo nu | Dɔ siwo bia be woaɖe mɔfiame alo awɔ nukpɔkpɔ ƒe nɔnɔmetata si wotu ɖe fli dzi |
| Tiatia ƒe Gɔmeɖoanyi | Panel ƒe lolome, LED ƒe gbeɖiɖi, nyawo tsɔtsɔ de eme ƒe goawo kple taɖodzinu ƒe keklẽ mama | Panel geometry, groove mɔfiame kple kekeli ƒe ŋusẽkpɔɖeamedzi si hiã |
Mɔnu si sɔ wu si woatsɔ awɔ dɔe la nɔ te ɖe akaɖi ƒe wɔwɔme bliboa dzi. Wallis ate ŋu ato wò nutata, LED ɖoɖo kple taɖodzinu si me kekeli le me hafi akafu laser dots, V-cutting lines alo project-specific combination.
Dimensions kple titrime: Custom panel didime, kekeme kple 3–12 mm titrime tiatia.
Panel ƒe nɔnɔme: Dzogoe ene me, dzogoe ene me kple CNC-cut custom contours si wotu ɖe nɔnɔmetatawo dzi.
Kekeli-dede ƒe ɖoɖo: Nugbɔ ɖeka, nu eve alo nu geɖe ƒe nɔnɔmewo le nukpɔkpɔ ƒe ɖoɖo nu.
Emission direction: Nukpɔkpɔ ƒe akpa siwo le axa ɖeka alo eve.
Dot alo fli ƒe nɔnɔme: Laser dot density alo V-lãɖeɖe ƒe nɔnɔme si wowɔ ɖe ɖoɖo nu.
Mɔ̃ɖaŋudɔwɔwɔ: CNC lãɖeɖe, kuɖiɖi, slots, notches, polishing kple nugbɔ nuwuwu.
Nubablɛ: Ametakpɔnu babla, kakɛwo kple atiɖakawo hena dɔdɔ ɖe duta.
Dzro Wò Aɖaŋuɖoɖo si Trɔ Asi Le Eŋu Me
Be nàɖe mɔ̃ɖaŋudɔwo me toto ƒe ɣeyiɣi dzi akpɔtɔ eye nàna nyayɔyɔ ƒe nyateƒetoto nanyo ɖe edzi la, taflatse gblɔ nyatakaka siwo gbɔna la dometɔ geɖe alesi nàte ŋui:
Wowu panel ƒe didime, kekeme, titrime kple agbɔsɔsɔ
PDF, DWG alo DXF ƒe nɔnɔmetata si me dowo, ʋɔtruwo, notches kple tolerances le
LED ƒomevi, LED ƒe gbeɖiɖi, amadede ƒe dzoxɔxɔ kple dɔwɔwɔ ƒe ŋusẽ
LED ƒe nɔƒe kple kekeli-deƒe ƒe goawo ƒe xexlẽme
Akpa ɖeka alo axa eve ƒe kekeli ƒe nudidi
Reflector, diffuser, frame goglome kple dzoxɔxɔ-kaka xɔtuɖoɖo
Taɖodzinu ƒe keklẽ, nukpɔkpɔ ƒe ɖekawɔwɔ kple nukpɔkpɔ ƒe teƒe si kekeli le
Edge polishing, ametakpɔ film, dzadzɛnyenye kple nubabla ƒe nudidiwo
Kekeli mamlɛtɔ kple ɖekawɔwɔ nɔ te ɖe nukpɔkpɔ ƒe kpekpe bliboa dzi tsɔ wu be wòanɔ te ɖe PMMA-gbadzɛa ɖeɖeko dzi. LED ƒe dodo, LED-ɖe-nugbɔ didi, nugbɔ polishing, panel didime, reflector, diffuser, frame nyaƒoɖeamenu, dzoxɔxɔ nɔnɔmewo kple ŋusẽ ɖoɖowo katã ate ŋu akpɔ ŋusẽ ɖe emetsonua dzi.
Le dɔ si wowɔ ɖe ɖoɖo nu gome la, Wallis kafui be woada kpɔɖeŋu aɖe kpɔ kple LED dzɔtsoƒe kple kpekpe ƒe akpa siwo asisi la ɖo be yeawɔ. Emegbe woate ŋu azã dodokpɔ me tsonu atsɔ aɖo kpe dometsotso ƒe nɔnɔme kple ewɔwɔ ŋuti nyatakakawo dzi hafi awɔe le agbɔsɔsɔ gã me.
Wallis naa kpekpeɖeŋu ɖeka-tɔƒe na custom PMMA kekeli mɔfiame agbalẽvi dɔwo, siwo dometɔ aɖewoe nye nu lãɖeɖe, laser dot dɔwɔwɔ, V-lãɖeɖe, CNC fabrication, nugbɔ polishing, dzadzɛnyenye, ŋkuléle ɖe, ametakpɔnu bablawo kple agbalẽɖoɖoɖa dzadzraɖo.
Duta Pallet Package
Nugoewo ƒe Agbatsɔtsɔ
Woate ŋu atrɔ asi le laser dot density ŋu le panel ƒe lolome, LED teƒe, kekeli-deƒe ƒe mɔfiame kple kekeli ƒe teƒe si hiã nu tsɔ wu be woatsɔ kpɔɖeŋu ɖeka si nye generic awɔ dɔ ɖesiaɖe ŋudɔ.
Nuƒlelawo ate ŋu aƒo nuawo nana, nukpɔkpɔ ƒe kpɔɖeŋu ƒe dɔwɔwɔ, CNC nɔnɔme, tomekuku, polishing kple export packing nu ƒu to nudzrala ɖeka dzi, si aɖe asidede asi le dɔwɔwɔ vovovowo dome dzi akpɔtɔ.
Nudɔdɔ suetɔ kekeake si wowɔna ɖekae doa alɔ dɔa ƒe dodokpɔ, kpɔɖeŋu ƒe wɔwɔme kple ŋkumekpɔkpɔ dodokpɔ hafi nuƒlelawo natsɔ wo ɖokui ana ɖe nuwɔwɔ ƒe agbɔsɔsɔme ŋu.
Wallis wɔa dɔ kple akaɖiwɔlawo, dzesiwɔlawo, nusiwo woɖena fiana wɔlawo, kontraktɔ kple nuƒleha siwo hiã na didime tɔxɛwo, nutatawo, wo gbugbɔgawɔ kple wo ɖoɖo ɖe duta.
Ðo Wò Nutata la ɖa be woagbugbɔ alé ŋku ɖe eŋu
Dɔwɔƒea ƒe gbesiagbedɔwo
PMMA kekeli mɔfianu nye optical acrylic panel si xɔa kekeli tso LED siwo woda ɖe go ɖeka alo esi wu nenema dzi eye wòmaa kekeli ma ɖe anyigba si lolo wu si me kekeli le dzi to laser dots, fli siwo wokpa alo extraction structures bubuwo dzi.
Wotrɔa asi le laser-dots ƒe kpekpeme kple dometsotso ŋu le akpata la katã dzi be woaɖe kekeli geɖe alo sue aɖe le teƒe vovovowo. Kpɔɖeŋu si wowɔ nyuie la xea fe ɖe didime si le tɔtrɔm tso LED dzɔtsoƒea gbɔ ta eye wònaa kekeli ƒe mama nyona ɖe edzi.
LGP la tsɔa kekeli tso LED siwo wotu ɖe nugbɔ dzi eye wòɖenɛ ɖa. Zi geɖe la, wotsɔa diffuser sheet dana ɖe LGP la ŋgɔ be wòana kekeli si dona la nafa, aɖe dometsotso siwo wokpɔna dzi akpɔtɔ eye wòana nukpɔkpɔ ƒe dzedzeme mamlɛtɔ nanyo ɖe edzi.
Akpa ɖeka ƒe akaɖi ƒe mɔ̃ akpa gãtɔ zãa megbe keklẽŋusẽ tsɔ trɔa kekeli si yia anyime yia teƒe si wokpɔa nu le eye wòɖea nukpɔkpɔ ƒe bu dzi kpɔtɔna. Ele be woado reflector kple diffuser ƒe ɖoɖo mamlɛtɔ kpɔ abe kpekpe bliboa ƒe akpa aɖe ene.
Wallis naa PMMA kekeli ƒe mɔfianu siwo ƒe titrime tso milimeta 3 va ɖo milimeta 12. Titrime si wokafu la nɔ te ɖe panel ƒe didime, LED package, kekeli ƒe mɔzɔzɔ didime, xɔtuɖoɖo ƒe nɔnɔme kple teƒe si li si woatsɔ aɖoe dzi.
Ɛ̃. Woate ŋu awɔ dot density le panel ƒe lolome si wowu enu, PMMA ƒe titrime, LED ƒe nɔƒe, LED ƒe gbeɖiɖi, xexlẽme si wotsɔ de eme ƒe goawo, emission mɔfiame kple taɖodzinu si me kekeli le nu.
Ɛ̃. Wallis ate ŋu ana CNC lãɖeɖe, dowo, slots, notches, nugbɔ polishing kple bubuwo fabrication le asisiwo ƒe nɔnɔmetatawo kple dɔa ƒe nudidiwo nu.
Nudɔdɔ ƒe agbɔsɔsɔ suetɔ nye akpa ɖeka, si wɔnɛ be woate ŋu adɔ kpɔɖeŋu aɖe hena dodokpɔ si sɔ, nukpɔkpɔ kple kpekpe hafi woawɔe le agbɔsɔsɔ gã me.
Zi geɖe la, wodzraa kpɔɖeŋuwo ɖo le dɔwɔŋkeke 3–7 lɔƒo me le fexexe kple mɔ̃ɖaŋununya ƒe kpeɖodzi megbe. Zi geɖe la, ewɔwɔ le agbɔsɔsɔ gã me xɔa abe kwasiɖa 2–5 ene, le nudɔdɔ ƒe agbɔsɔsɔ, dɔwɔwɔ ƒe sesẽ kple ewɔwɔ ƒe ɖoɖowɔɖi si ŋu woɖo kpee nu.
Taflatse ɖo PDF, DWG alo DXF ƒe nɔnɔmetata ɖekae kple eƒe titrime, agbɔsɔsɔme, LED ƒe ɖoɖo, kekeli-deƒe ƒe goawo, ya si dona ƒe mɔfiame, keklẽŋusẽ kple kaka ƒe nyatakakawo, nugbɔ ƒe dɔwɔwɔ kple nubablɛ ƒe nudidiwo.
