Jumla Babban Adadin Rigar Inlay Sitika Tag Label na RFID

Mu RFID Wet Inlay da RFID Dry Inlay jerin an tsara su don aikace-aikacen RFID na duniya waɗanda ke buƙatar babban dogaro, dogon zangon karantawa, da ingantaccen kayan dacewa.

       RFID Wet Inlay ya zo tare da goyan bayan mannewa da layin saki, manufa don sauya lakabin da aikace-aikacen kai tsaye.
       RFID Dry Inlay ba tare da mannewa ba, cikakke don lamination, saka cikin katunan PVC / PET / PC, ko haɗawa cikin samfuran al'ada.

       Dukansu an ƙera su tare da ƙirar eriya ta ci gaba, jujjuya madaidaici, da ingantaccen kulawa don ingantaccen aiki a wurare daban-daban.

Ƙayyadaddun	Inlay	Dry Inlay
Tsarin	Eriya + Chip + Adhesive + Layin Saki	Eriya + Chip akan fim ɗin PET (babu m)
Yawanci	HF 13.56MHz / UHF 860-960 MHz	HF 13.56MHz / UHF 860-960 MHz
Yarjejeniya	ISO14443A / ISO15693 / ISO18000-6C	ISO14443A / ISO15693 / ISO18000-6C
Chips gama gari	NXP MIFARE® Classic / Ultralight / F08 / NTAG® / Alien H3 / UCODE	Daidai da Wet Inlay
Kayan Antenna	Aluminum / Copper	Aluminum / Copper
Substrate	fim din PET	fim din PET
Karanta Range	2-10 cm HF / 1-8 m UHF (dangane da guntu & eriya)	Hakazalika, ya danganta da haɗin kai
Tsarin tsari	Mirgine (misali)	Roll ko Sheet
Keɓancewa	Chip / Girma / Siffar / Eriya / Rufewa	Tsarin lamination iri ɗaya + na al'ada

• An riga an yi amfani da m don amfani mai sauri

• Mai jituwa tare da injunan juyar da lakabi

• Tsayayyen aikin karantawa & haɗin gwiwa mai ƙarfi

• Ya dace da dillali, dabaru, bin diddigin kadara, samfuran NFC

• Babu m, manufa domin PVC katin lamination

• Mai jituwa tare da kayan kera katin wayo

• Ya dace da katunan ID na PVC, katunan membobin, katunan sufuri, samfuran gyare-gyare na al'ada

• Ƙarfafa mafi girma lokacin da aka rufe

• Smart ID & IC katunan

• Alamomin NFC da amincin samfur

• Laburare & bin diddigin kadarar kayan tarihi

• Warehouse & dabaru UHF tag tana juyawa

• Tikitin taron da ɗorawa

• Kayayyakin rigakafin jabu

• Binciken kadarorin masana'antu

• Sufuri & katunan harabar

• 100% Cikakken Dubawa - Kowane inlay yana wuce tsauraran gwajin lantarki da dubawa na gani.

• Cikakkun Keɓancewa - Chip, eriya, girman, ɓoyewa, marufi - cikakke don buƙatun ku.

• Fassara Mai ƙarfi - ƙwararrun masana'anta na kayan katin PVC da samfuran RFID.

• Stable Supply & Fast Bayarwa - Balagaggen samar da Lines da cikakken kayan haja.

Q1: Menene bambanci tsakanin Rigar Inlay da Dry Inlay?

Rigar Inlay ya haɗa da mannewa da layin saki don aikace-aikacen kai tsaye; Dry Inlay ba shi da manne kuma an tsara shi don sakawa/lamination.

Q2: Za ku iya siffanta girman inlay, nau'in guntu, ko ƙirar eriya?

Ee. Muna ba da cikakkiyar keɓancewa gami da nau'in guntu, shimfidar eriya, girman/siffa, ɓoyewa, da sauransu.

Q3: Kuna samar da samfurori?

Ee, samfuran kyauta suna samuwa don gwaji (abokin ciniki yana biyan jigilar kaya).

Q4: Ana iya buga Inlays Wet?

Ee. Ana iya jujjuya su zuwa alamomin da za a iya bugawa tare da manyan kayayyaki daban-daban.

Q5: Shin Dry Inlays ya dace da samar da katin PVC ko PET?

Lallai. An tsara shi musamman don lamination a cikin katunan PVC / PET / PC.

Q6: Wadanne matakan kula da ingancin kuke amfani da su?

Duk inlays ana yin gwajin lantarki 100% da dubawa na gani.

Q7: Menene lokutan jagora don samarwa?

Samfurin umarni: 3-7 kwanaki; Samar da taro: 10-20 kwanaki dangane da gyare-gyare.

Q8: Wadanne kwakwalwan kwamfuta ne akwai?

Muna goyan bayan jerin NXP MIFARE®, NTAG®, ICODE®, Alien H3, UCODE, F08, da ƙari.

Q9: Shin za ku iya ba da tsarin nadi da takarda?

Ee. Rigar Inlays a cikin Rolls; Busassun Inlays a cikin nadi ko tsarin takarda.

Q10: Kuna goyan bayan rubutowa da rubuta bayanai?

Ee. Za mu iya pre-encode EPC, UID, kalmomin shiga, da bayanan mai amfani bisa ga buƙatun ku.

       Samu Samfuran Kyauta & Sabon Magana Yanzu →