Wholesale RFID Ji Inlay , Jalen Inlay ani Label Tag

Wholesale RFID Jilama Inlay s, Jalen Inlay s ani Label Tags

Wallis bɛ RFID inlays jilamaw, inlays jalenw ani label tags caman tigɛli di ka ɲɛsin smart-card, feereli, logistiki, pakew, gafemarayɔrɔ, ko kɛlenw, nafolo ɲinini ani fɛn dilannenw dɔnni porozɛw ma minnu ka bon kosɛbɛ. fɛɛrɛ minnu bɛ sɔrɔ olu ye 13,56MHz HF / NFC ani 860–960MHz UHF RAIN RFID ye .

Inlays ɲiginnenw ye nɔrɔlan ye min bɛ se ka degun ani release liner walasa ka labeli caman tigɛli walima ka u kɛ tilennen na min bɛ bɛn. Inlay jalenw kɔnɔ, puce-and-antenne lajɛlen bɛ sɔrɔ tabaga dɔ kan, n’a ma kɛ ni nɔrɔlan laban ye, wa u dabɔra ka fɛn wɛrɛ caman tigɛli, ka u don u kɔnɔ, ka u lamini walima ka u don fɛn wɛrɛ la.

Sannikɛlaw bɛ se ka puce, protocole, antenne hakɛw, inlay hakɛw, adhesive, roll or sheet format, encoding, bad-tag marking, winding direction ani packaging kɛ ka kɛɲɛ ni u yɛrɛ sago ye. RF baara laban ka kan ka tiɲɛ baarakɛminɛn yɛrɛyɛrɛ kan ani kalanbagaw ka sigida.

A ɲini ka fɛn dɔ ɲini min bɛ wele ko Wholesale RFID Inlay Quote

Fɛɛrɛko ɲɛfɔli

Ɲɛ-dakun-fɛrɛnkan suganditaw ye 869–915MHz UHF , 13.56MHz ISO /IEC 14443 ani 13.56MHz ISO /IEC 15693. Puce tigitigi, marabolo UHF band, antɛni ani jɔli dafalen ka kan ka dafa ka kɔn quotation ɲɛ.

Jiginnen Inlay ni Jalen Inlay ni Banbali RFID Label

Inlay jilama dɔ sugandi walasa ka Label caman tigɛli kɛ

Inlays ɲiginnenw bɛnnen don ni sannikɛla mago bɛ fɛn dɔ la min bɛ a yɛrɛ nɔrɔ RFID walasa ka fara papiye walima ɲɛda stock sintetiki kan, ka sɛbɛnni kɛ, ka die tigɛ ani ka rollo laban tigɛli kɛ.

Inlay jalen dɔ sugandi Embedding kama

Inlay jalenw bɛnnen don ni RFID yɔrɔ bɛna lamini karti kɔnɔ, ka don fɛn dilannen dɔ kɔnɔ, ka don bolokɔni kɔnɔ walima ka don jɔli wɛrɛ la ni labeli nɔrɔlan jɔnjɔn tɛ.

Label Finished sugandi walasa ka baara kɛ ni a laban tilennen ye

Label jiginni ka fisa ni kiliyan bɛ fɛn dɔ ɲini min labɛnnen don ka sɛbɛn walima min sɛbɛnna ka kɔn, ɲɛda fɛn laban, nɔrɔlen, die tigɛlen, kodeli ani roll specification dafara kaban.

HF / NFC ani UHF RFID Fɛnɲɛnɛma sugandili

Frequency tɛ fɛn dafalen ɲɛfɔ

Inlay s minnu bɛ baara kɛ frequency kelen na, olu bɛ se ka baara kɛ ni protocole suguya wɛrɛw ye, chip cikanw, hakilijagabɔ sigicogo ani lakana baarakɛcogo. Kalanbaga, puce walima protocol wajibiyalen di sanni ka sugandi ka kɛɲɛ ni frequency dɔrɔn ye.

Kalansenw yɔrɔ ka kan ka kɔrɔbɔ jɔli laban na

HF inlays bɛ se ka kalan santimɛtɛrɛ damadɔ kɔnɔ, ka sɔrɔ UHF inlays bɛnnenw bɛ se ka se mɛtɛrɛ damadɔ ma. Baara laban bɛ bɔ puce, antenne, kalanden fanga, marabolo band, tagged material, orientation ani integration de la.

UHF Fɛn minnu bɛ dilan, olu bɛ marabolo bandi labɛnni wajibiya

Antɛni ka kan ka sugandi ka kɛɲɛ ni yɔrɔ laɲininen ye ani kalanbaga sigida ye. Fɛn min bɛ ɲɛnabɔ UHF mara kelen kama, o bɛ se ka kɛ ko a tɛ baara kɛcogo kelen di mara wɛrɛ kɔnɔ.

Puce, Memoire ani Encoding Sugandili

NTAG213, NTAG215 ani NTAG216

Nin NFC Foroba suguya 2 puwɛntiw bɛ sugandi tuma caman na URLw, nizɛri kunnafoniw, fɛn dilannenw kunnafoniw ani feerekɛlaw ka jɛɲɔgɔnya kama. U bɛ baarakɛla-hakilila-seko danfaralenw Di, o la NDEF kɔnɔko kodɔnnaw ka kan ka Sɛmɛntiya ka Sɔrɔ ka puwɛnti sugandi.

MIFARE ani DESFire Sugandili

MIFARE Classic, Ultralight walima DESFire ka fɛn dilannenw bɛ se ka wajibiya walasa ka se ka don, ka kɛ tɔndenw ye, ka taa ni u ye, ka ko kɛtaw walima ka karti hakilitigi lakananenw sɔrɔ minnu bɛ bɛn ɲɔgɔn ma. Kalanbaga, baarakɛminɛn, kilisi ani porogaramu ka kan ka bɛn puce denbaya tigitigi ma.

ICODE ani ISO /IEC 15693 Sugandili

ICODE inlays bɛ se ka dɛmɛ don gafemarayɔrɔ, nafolo ani lamini-karti baarakɛminɛnw na minnu bɛ bɛn ɲɔgɔn ma. U man kan ka jate ko u bɛ baara kɛ ni ISO /IEC 14443 kalanbaga bɛɛ ye.

UCODE, Impinj ani Alien UHF Sugandili

UHF puce sugandili ka kan ka E PC hakilijagabɔ jateminɛ, TID wajibiyalenw, baarakɛla hakilijagabɔ min bɛ se ka sugandi, sensitivity, access or kill passwords ani bɛnkan ni kalanbaga ni porogaramuw ka platformu ye.

UID, TID ani E PC ye kunnafonidilanw ye minnu tɛ kelen ye

HF / NFC fɛnw bɛ se ka puce UID jira, k’a sɔrɔ UHF fɛnw bɛ sɔrɔ a ka c’a la izini TID ni E PC hakilijagabɔlan ye min bɛ se ka porogaramu. A jira ko dantigɛlikɛlan min ka kan ka kalan, ka kodɔn, ka sɛbɛn walima ka bɛn ni kiliyanw ka kunnafonidilan ye.

Encoding, Passwords ani Locking (daɲɛ dogolenw) ani Locking

Baarakɛminɛnw bɛ se ka kɛ NDEF URL sɛbɛnni, E PC kodeli, seriyali data, tɔgɔlasɛbɛnw ani puce kɛrɛnkɛrɛnnenw datuguli ye. Kɔlɔsili banbaliw ka kan ka kɛ dɔrɔn kunnafoniw sɛgɛsɛgɛli laban kɔfɛ bawo a bɛ se ka kɛ u tɛ se ka kɔsegin.

RFID Wet Inlay s ka ɲɛsin Labelw ni Stickers ma

Degun-Sensitif Adhesive Construction (Nɛgɛmafɛnw) minnu bɛ se ka kɛ ni degun ye

Inlays ɲiginnenw ye nɔrɔlan ni release liner ye, o b’a to u bɛnnen don ka labeli caman caman cili kɛ. Nɔrɔlan ka kan ka bɛn papiye, gilasi, plastiki, fini, yɔrɔ pentilenw walima a kɛcogo wɛrɛw ma.

Label jiginni min bɛ se ka sɛbɛn

Paper, PET , PP walima ɲɛda fɛn wɛrɛ bɛ se ka lamini inlay sanfɛ walasa ka labeli dɔ dilan min bɛ se ka sɛbɛn flexographie, numérique, thermal-transfer, direct-thermal walima UV sɛbɛnni kama.

Roll Format min bɛ kɛ ka baara kɛ ni otomatiki ye

A ka c’a la, fɛn ɲiginnenw bɛ lase rollow kan walasa ka fɛn caman sɛmɛntiya, ka kodɔn, ka sɛbɛnni kɛ walima ka baara kɛ otomatiki la. Core size, web width, pitch ani winding direction ka kan ka bɛn jiginɛ minɛnw ma.

Aplikasi Surface Testing (Aplikasi Surface Testing).

Nɔrɔli fanga ni RF baarakɛcogo ka kan ka jateminɛ fura yɛrɛ kan. Nɛgɛ, jilama, plastiki min falen bɛ karɔbɔli la, stacking dense ani surfaces curvés bɛ se ka inlay baarakɛcogo Changer.

RFID Inlay s jalenw ka ɲɛsin Kartiw ni fɛn dilannenw doncogo ma

Carte à puce Lamini ye

Inlay jalenw bɛ se ka don PVC , PET walima polikarbonati smart-card structures kɔnɔ ni antɛni hakɛw, puwɛnti jɔyɔrɔ, a janya bɛɛ lajɛlen ani a lamini funteni bɛ bɛn karti dilanni ma.

Bololabaarakɛlaw, Tikitiw ani fɛn dilannenw

Inlay jalenw bɛ se ka don walima ka lamini ka kɛ bolokɔniw ye, ka kɛ kilisi ye, ka kɛ tikitiw ye, ka kɛ badgew ye ani ka fɛn dilannenw kɛ ni jɔli ye min bɛ puce lakana ani ka antenne tuning mara.

Integration bɛ se ka RF ka baarakɛcogo Changer

Datugulan layɛrɛw, nɔrɔlanw, plastikiw, sɛbɛnnikɛlanw, nɛgɛ yɔrɔw ani fɛn dilannenw kɔnɔfɛnw bɛ se ka antɛni detune. Aw bɛ fura dafalen kɔrɔbɔ sanni aw ka aw jigi da fiɲɛ hɔrɔnyalen inlay jaabi dɔrɔn kan.

Roll walima Sheet Supply (Bɔli walima sɛbɛnfura).

Inlays jalenw bɛ se ka baro kɛ roll walima sheet cogo la ka kɛɲɛ ni lamination, cutting, punching walima product-assembly kɛcogo ye.

Roll, Sheet ani fɛn caman tigɛli wajibiyalenw

Antɛni Bonya ani Inlay Bonya

Antɛni hakɛw bɛ RF jogo jira, ka sɔrɔ inlay walima die-cut hakɛw bɛ tabaga yɔrɔ jira min wajibiyalen don fɛn caman tigɛli walima u doncogo fɛ. U fila bɛɛ ka kan ka jira ja min dabɔra.

Core Size ani Roll Diameter

Aw bɛ kɔnɔna kɔnɔna cɛmancɛ, rollo kɛnɛma cɛmancɛ hakɛ maksimali, web bonya ani inlays hakɛ fɔ roll kelen kɔnɔ walasa fɛn in ka bɛn kiliyan ka masin ma.

Pitch, Gap ani Winding siratigɛ

Pitch, web direction, chip orientation, cross-web position ani inside- walima outside-winding ka kan ka bɛn fɛn caman tigɛli, kodeli walima baarakɛcogo ma.

Sheet Layout ka ɲɛsin Karti Lamination ma

Inlay sɛbɛn jalenw bɛ matirili dabɔlen de wajibiya min bɛ antɛni jɔyɔrɔ jira, puwɛnti ɲɛsincogo, sɛbɛn hakɛw, sɛbɛnni taamasiyɛnw ani bɛnkan ni karti punching labɛncogo laban ye.

Splice ani Defective- Inlay Sariyaw

Aw bɛ a ɲɛfɔ ni inlays nafamaw bɔra, ni taamasiyɛn kɛra walima ni u maralen don ani ka splices hakɛ dantɛmɛnen sigi sen kan roll kelen kɔnɔ. Otomatiki fɛnw dilanni siraw bɛ se ka kɛ sababu ye ka roll-continuity controls gɛlɛnw kɛ.

Ji ni jalen kɛcogo RFID Inlay s

Finifeere ni finiw jatebɔsɛbɛn

UHF inlays ɲiginnenw ni labels convertés bɛ se ka dɛmɛ don fɛnw hakɛ dɔnni na, ka stock jate, ka sɔrɔ, ka fɛnw falen ani ka fɛnw dilancogo ye ni u bɛ baara kɛ ni kalanbagaw ni porogaramuw ye minnu bɛnnen don.

Logistiki ani Warehouse Labels

RFID labeliw bɛ se ka kartɔnw, totew, parselaw, minɛn minnu bɛ se ka baara kokura ani fɛnmarayɔrɔw nafolo dɔn. Antɛni ni a bilali ka kan ka kɛ fɛn ye min bɛ se ka kɛ pake yɛrɛ kan ani a kɔnɔfɛnw.

NFC Fɛn dilannenw ka jɛɲɔgɔnya ani u ka dantigɛli

NFC wet inlays bɛ se ka wuli ka kɛ stika ye minnu bɛ smartfon minnu bɛ bɛn ɲɔgɔn ma, olu ni fɛn dilannenw kunnafoniw, garantiw, cikanw, laseliw walima dantigɛli baarakɛminɛnw cɛsiri.

PVC , PET ani PC Carte à puce s

HF inlay jalenw bɛ se ka lamini ka kɛ dondaw, tɔndenw, kalanso, lotɛli walima bolifɛnw kartiw ye ni puce, antenne ani karti jɔcogo bɛ bɛn kalanbaga sigicogo laɲininen ma.

Kitabumarasow ni sɛbɛnmarayɔrɔw ɲɛnabɔli

ISO /IEC 15693 HF labeliw bɛ se ka dɛmɛ don gafemarayɔrɔ, sɛbɛnw ani sɛbɛnmarayɔrɔ baarakɛcogo la minnu bɛ bɛn ɲɔgɔn ma ka kɛɲɛ ni kalanden, kunnafonidilanw ani bilali wajibiyalenw ye.

Kow, Tikitiw ani Bololabaarakɛlaw

Inlay s bɛ se ka don tikitiw, badgew ani bolokɔniw na walasa ka u dɔn, ka don u la ani ka u sen don a la. Puce hakilijagabɔ, lakana ani kalan cycles ka kan ka sugandi event platform kama.

Industriw ka nafolo sɔrɔcogo dɔnni

RFID bɛ se ka baarakɛminɛnw, minɛnw ani nafolo jɔlenw dɛmɛ, nka sigida gɛlɛnw, nɛgɛdagayɔrɔw, kemikɛlifɛnw ani funteni caman bɛ se ka kɛ sababu ye ka taamasiyɛn dafalen kɛrɛnkɛrɛnnen dɔ wajibiya sanni ka kɛ ni fɛn dɔ ye min bɛ kɛ ka kɛɲɛ ni sariya ye.

Kunnafoni minnu ka kan ka sɔrɔ walasa ka Quotation Tiɲɛnen sɔrɔ

• Inlay ɲiginnen, inlay jalen walima RFID label wajibiyalen

• Aplikasi ani jago baarakɛcogo laɲinilen

• HF / NFC 13,56MHz walima UHF 860–960MHz

• Protocole wajibiyalen ani puce préféré

• Kalanbaga, encodeur, smartphone walima karti-sistema modɛli

• Tagged material, fɛn dilannenw kɔnɔkow ani jiginni sigida

• Laɲini kalan hakɛ, ɲɛsincogo ani kalan-yɔrɔ cogoyaw

• Antɛni hakɛw, inlay hakɛw ani labeli laban walima karti labɛncogo

• Nɛgɛ, ɲɛda fɛn, finimugu ani sigida magoɲɛfɛnw

• Encoding, passwords, UID/TID/E PC bɛnkan ani sɛbɛnni wajibiyalenw

• Roll core, web width, pitch, winding direction walima sheet matrix

• Koman hakɛ, misaliw, taayɔrɔ ani waati bolodacogo wajibiyalen

Aw ka Inlay Sεbεn ci

Misaliw sɛgɛsɛgɛli ani jogoɲini

Kuran ni ɲɛnayeli sɛgɛsɛgɛli

Soso ɲɛ b’a jira ko inlays bɛ sɛgɛsɛgɛli dafalen kɛ kuran ni ɲɛnayeli fɛ. Koman ɲɛfɔli ka kan ka sɛgɛsɛgɛli kɛcogo ɲɛfɔ, sɔnni sariya, fɛn min bɛ don fɛn na, o minɛcogo tiɲɛnen ani sɛgɛsɛgɛli sɛbɛnw minnu wajibiyalen don sannikɛla fɛ.

RF baarakɛcogo sɛgɛsɛgɛli

Aw bɛ inlay kɔrɔbɔ ni kalanbaga laɲininen ye, fanga, antɛni, fɛn min taamasiyɛn kɛra, a ɲɛsincogo ani a lamini. Fiɲɛ hɔrɔnyalen kalanni yɔrɔjan tɛ baarakɛcogo kelen garanti label jiginni kɔfɛ walima karti laminini kɔfɛ.

Kɔrɔbɔli min bɛ kɛ ni nɔrɔli ni fɛn caman tigɛli ye

Inlay samples ɲiginnenw ka kan ka sɛgɛsɛgɛ walasa ka u bɔ, ka u ta, ka u bɔ, ka u tigɛ, ka u matirili bɔ, ka u balo ani ka u bɛn ɲɛda fɛn ni u kɛli yɔrɔ ma.

Lamination ani Embedding sɛgɛsɛgɛli

Inlay jalenw ka kan ka sɛgɛsɛgɛ lamination walima molding kɛcogo dafalen fɛ walasa ka puwɛnti ɲɛnamaya, antɛni sirili, u tɔgɔ sɛbɛnni, u flakɛ ani u kalanni kɛcogo kɔfɛ.

Kodeli ani Donanw sɛgɛsɛgɛli

UID, TID, E PC , NDEF, tɔgɔlasɛbɛnw ani kiliyanw ka kunnafoniw kodɔnlenw ka kan ka kalan ka segin u kan ani ka u suma ni kunnafonidilanw ye minnu dagalen don. Kunnafoni fɛn caman bɛrɛbɛrɛ sɛbɛnnen ka kan ka to ka bɛn ɛntɛrinɛti sɛbɛnw ma.

Roll ani Sheet Sɛgɛsɛgɛli

Aw bɛ jate, fɔcogo, ɛntɛrinɛti ɲɔgɔndan, winding direction, core, splices, bad-tag marking, sheet layout ani protective packaging sɛgɛsɛgɛ sani aw ka ci.

Mun na ka Wallis sugandi ka ɲɛsin jɛgɛfeere ma RFID Inlay s?

Label Formats jilama, jalen ani fɛn caman tigɛli

Sannikɛlaw bɛ se ka fɛnw sɔrɔ minnu bɛ nɔrɔ nɛgɛma ɲiginnenw na, fɛn jalenw minnu bɛ kɛ ka fɛnw don u kɔnɔ ani sɛbɛnw caman tigɛli walasa ka sɛbɛnni labanw kɛ walima ka u kɛ poroze baarakɛcogo kelen fɛ.

HF / NFC ani UHF Puce Sugandili

Wallis bɛ se ka baro kɛ ISO /IEC 14443, ISO /IEC 15693 ani E PC Gen2 fɛnw kan kalan hakɛ danfaralenw, kalanbagaw, hakilijagabɔ ani baarakɛcogo wajibiyalenw kama.

Antenna custom ani Production Layidu

Antɛni hakɛw, inlay hakɛ, roll specifications, sheet matrices, adhesive ani final integration structure bɛ se ka lajɛ ka kɛɲɛ ni kiliyan ka minɛnw ye.

Encoding ani Donanw ka baarakɛminɛnw minnu bɛ se ka fɛn caman sɛmɛntiya

NDEF, E PC , seriyali kunnafoniw, tɔgɔlasɛbɛnw, UID/TID kalanni, QR kodew, barɔdiw ani sɛbɛnniw bɛnkan bɛ se ka baro kɛ ka kɛɲɛ ni puce sugandilen ye.

Sample Approval ka kɔn Bulk Supply ɲɛ

Misali sɛgɛsɛgɛli bɛ dɔ bɔ kalanbagaw ka bɛnbaliya la, nɔrɔli barikama, roll layout ma bɛn, antenne detuning walima dɛsɛ karti lamini waati.

Samples ani Wholesale Pricing ɲini

Ɲininkali minnu bɛ kɛ tuma caman na

Danfara jumɛn bɛ inlay ɲiginnen ni inlay jalen cɛ?

Inlay ɲiginnen dɔ kɔnɔ, nɔrɔ min bɛ se ka degun ani min bɛ bɔ a la. Inlay jalen bɛ dilan k’a sɔrɔ a ma kɛ ni labeli laban ye min bɛ a yɛrɛ nɔrɔ a la, wa a dabɔra ka a don a kɔnɔ, ka a lamini walima ka a sɛmɛntiya ka taa a fɛ.

Yala inlay ɲiginnen ni RFID labeli dafalen ye kelen ye wa?

A tɛ kɛ wajibi ye. A ka c’a la, labeli dafalen bɛ ɲɛda fɛn dɔ fara a kan min bɛ se ka sɛbɛn, nɔrɔ min bɛ kɛ ka kɛɲɛ ni a kɛcogo kɛrɛnkɛrɛnnen ye, die tigɛ laban, sɛbɛnni ani roll specification RFID inlay sanfɛ.

Yala inlay jalenw bɛ se ka lamini ka kɛ PVC , PET walima PC kartiw ye wa?

Ɔwɔ, ni antɛni, tabaga, puce jɔyɔrɔ, lamini funteni, a janya bɛɛ lajɛlen ani karti labɛncogo dabɔra inlay sugandilen kama. Lamini sɛgɛsɛgɛli min bɛ kɛ ni misali ye, o ka ɲi.

Yala aw bɛ HF / NFC ni UHF inlays fila bɛɛ di wa?

Awɔ. Ɲɛ-dakun sugandili minnu bɛ sɔrɔ, olu ye 13,56MHz ISO /IEC 14443, 13,56MHz ISO /IEC 15693 ani UHF fɛnw ye. Puce ni antenne tigitigi ka kan ka dafa.

Ne bɛ se ka kalan hakɛ jumɛn makɔnɔ?

HF inlays bɛ kalan cogoya la yɔrɔ surun na, k’a sɔrɔ UHF inlays bɛ se ka kalan ka bɔ yɔrɔ surun na ka se mɛtɛrɛ damadɔ ma. O laban bɛ bɔ puce, antenne, reader, region, material, orientation ani integration de la.

Yala ne bɛ se ka baara kɛ ni o inlay kelen ye NFC telefɔniw ni UHF kalanbagaw kama wa?

Fɛn min dilannen don kɛrɛnkɛrɛnnenya la ni fɛn fila ye, o dɔrɔn de bɛ o ɲɔgɔndan fila bɛɛ dɛmɛ. NFC inlay standard ni UHF inlay standard ye fɛnw ye minnu tɛ kelen ye.

Yala inlays ɲiginnenw bɛ se ka sɛbɛn wa?

U bɛ se ka wuli ni papiye walima ɲɛdafɛn dilannen ye min bɛnnen don walasa ka sɛbɛnni kɛ. Aw bɛ sɛbɛnnikɛlan fɛɛrɛ, enki walima bandi, labeli yɔrɔ ani a muɲuli wajibiyalenw fɔ.

Yala Wallis bɛ se ka antɛni hakɛ ni a cogoya kɛ ka kɛɲɛ ni a yɛrɛ sago ye wa?

Antɛni ni inlay hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu hakɛ bɛ se ka lajɛ ka kɛɲɛ ni puce impedance ye, kalan kɛcogo wajibiyalen, yɔrɔ sɔrɔlen, tagged material ani order volume.

Puce jumɛnw bɛ sɔrɔ?

Sugandili bɛ se ka kɛ NTAG, MIFARE, DESFire, ICODE, F08, NXP UCODE, Impinj walima Alien denbayaw ye. A sɔrɔli ani a bɛnnen ka kan ka dafa poroze kɛrɛnkɛrɛnnen kama.

Yala Wallis bɛ se ka UID, E PC , tɔgɔlasɛbɛnw walima baarakɛlaw ka kunnafoniw kodɔn wa?

Encoding ni data-writing baarakɛcogo bɛ Se ka Fɔ ka Kɛɲɛ ni puce (puce) ye. UID bɛ se ka kɛ izini kɔnɔ, k’a sɔrɔ E PC , NDEF, tɔgɔlasɛbɛnw ani baarakɛlaw ka kunnafoniw bɛ se ka porogaramu ka kɛɲɛ ni fɛn dilannen ye.

Yala aw bɛ se ka inlays ɲiginnenw di rollo kɔnɔ ani inlays jalenw di sheets kɔnɔ wa?

Awɔ. A ka c’a la, fɛn minnu bɛ kɛ ni fɛn ɲiginnenw ye, olu bɛ dilan kurukuruw kɔnɔ, k’a sɔrɔ fɛn jalenw bɛ se ka dilan kurukuruw walima sɛbɛnw kɔnɔ ka kɛɲɛ ni fɛn caman tigɛli walima karti-lamini kɛcogo ye.

Yala stock samples bɛ sɔrɔ wa?

Soso ɲɛ b’a jira ko misaliw bɛ sɔrɔ ani ko cikan bɛ sara kiliyan fɛ. Aw bɛ puce, antenne ani sample sariyaw dafa ni Wallis ye sani aw ka ci.

A dilanni ɲɛminɛ waatiw ye jumɛnw ye?

Soso ɲɛ bɛ tile 3–7 ɲɔgɔn fɔ misaliw kama ani tile 10–20 ɲɔgɔnna caman dilanni na, ka kɛɲɛ ni ladamuni ye. I ka sisan waati bolodacogo dafa ni i bɛ quotation ɲini.

Jogoɲumanya kɔlɔsili jumɛnw bɛ kɛ?

Soso ɲɛ b’a jira ko kuran sɛgɛsɛgɛli ni ɲɛnayeli sɛgɛsɛgɛli bɛ kɛ. Sannikɛlaw ka kan ka RF, encoding, roll, lamination walima traceability wajibiyalen wɛrɛw ɲɛfɔ sanni ɲɛfɔli kɔnɔ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ inlay suguya, frequency, protocol, chip, reader, application material, target range, antenne ani inlay hakɛ ci, roll or sheet format, encoding, quantity, packaging ani destination.