Wholesale High Quantity Wet Inlay Sticker Tag RFID Label

Letoto la rona la RFID Wet Inlay le RFID Dry Inlay li etselitsoe lits'ebetso tsa lefats'e tsa RFID tse hlokang ho ts'epahala ho hoholo, ho bala nako e telele, le tšebelisano e ntle haholo ea thepa.

       RFID Wet Inlay e tla ka sekhomaretsi le liner tse lokollang, tse loketseng ho fetolela li-label le ts'ebeliso e tobileng.
       RFID Dry Inlay ke sekontiri se se nang letho se se nang sekhomaretsi, se loketseng ho lamination, ho kenella ka har'a likarete tsa PVC / PET / PC, kapa ho hokahana le lihlahisoa tse tloaelehileng.

       Ka bobeli li entsoe ka moralo o tsoetseng pele oa li-antenna, phetoho e nepahetseng haholo, le taolo e tiileng ea boleng bakeng sa ts'ebetso e tsitsitseng libakeng tse fapaneng.

Specification	Wet Inlay	Dry Inlay
Sebopeho	Antenna + Chip + Adhesive + Release Liner	Antenna + Chip ho filimi ea PET (ha e na sekhomaretsi)
Khafetsa	HF 13.56MHz / UHF 860–960 MHz	HF 13.56MHz / UHF 860–960 MHz
Protocol	ISO14443A / ISO15693 / ISO18000-6C	ISO14443A / ISO15693 / ISO18000-6C
Li-Chips tse tloaelehileng	NXP MIFARE® Classic / Ultralight / F08 / NTAG® / Alien H3 / UCODE	Hoa tšoana le Wet Inlay
Boitsebiso ba Antenna	Aluminium / Koporo	Aluminium / Koporo
Substrate	PET filimi	PET filimi
Bala Range	2–10 cm HF / 1–8 m UHF (e itšetlehile ka chip & antenna)	E tšoanang, ho itšetlehile ka ho kopanya
Mefuta	Roll (tloaelehileng)	Roll kapa Sheet
Boikemisetso	Chip / Boholo / Sebopeho / Antenna / Encoding	Sebopeho sa lamination se tšoanang + se tloaelehileng

• Sekhomaretsi se kentsoeng pele bakeng sa tšebeliso e potlakileng

• E lumellana le mochini o fetolang li-label

• Ts'ebetso e tsitsitseng ea ho bala & maqhama a matla

• E loketse mabenkele, thepa, ho latedisa thepa, lihlahisoa tsa NFC

• Ha ho sekhomaretsi, se loketseng ho lamination ea karete ea PVC

• E lumellana le lisebelisoa tsa ho etsa likarete tse bohlale

• E loketse likarete tsa ID tsa PVC, likarete tsa litho, likarete tsa lipalangoang, lihlahisoa tse entsoeng ka tloaelo

• E phahameng durability ha e koaletsoe

• Smart ID & likarete tsa IC

• Lileibole tsa NFC le netefatso ea sehlahisoa

• Laeborari le polokelo ea thepa ea polokelo

• Ho fetola tag ea Warehouse & Logistics UHF

• Litekete tsa ketsahalo le mabanta a letsoho

• Thepa e thibelang thepa ea maiketsetso

• Ho latela thepa ea indasteri

• Lipalangoang le likarete tsa khamphase

• 100% Tlhahlobo e Felletseng - Inlay e 'ngoe le e' ngoe e feta tlhahlobo e tiileng ea motlakase le tlhahlobo ea pono.

• Tloaelo e Felletseng - Chip, antenna, boholo, khouto, sephutheloana - e etselitsoe litlhoko tsa hau ka botlalo.

• Semelo se Matla sa Material - Moetsi ea hloahloa oa lisebelisoa tsa karete ea PVC le lihlahisoa tsa RFID.

• Phepelo e Tsitsitseng le Phano e potlakileng - Mehala ea tlhahiso e holileng le thepa e felletseng.

Q1: Phapang ke efe pakeng tsa Wet Inlay le Dry Inlay?

Wet Inlay e kenyelletsa sekhomaretsi le ho lokolla liner bakeng sa kopo e tobileng; Dry Inlay ha e na sekhomaretsi mme e etselitsoe ho kenya / lamination.

Q2: A na u ka iketsetsa boholo ba inlay, mofuta oa chip, kapa moralo oa antenna?

Ee. Re fana ka tlhophiso e felletseng ho kenyelletsa mofuta oa chip, sebopeho sa antenna, boholo / sebopeho, khouto, jj.

Q3: Na u fana ka mehlala?

E, lisampole tsa mahala li teng bakeng sa tlhahlobo (moreki o lefa thepa ea thepa).

Q4: Na li-inlays tse metsi li ka hatisoa?

Ee. Li ka fetoloa lileibole tse hatisitsoeng tse nang le lisebelisoa tse fapaneng tsa holimo.

Q5: Na li-Inlays tse omileng li loketse tlhahiso ea karete ea PVC kapa ea PET?

Ruri. E etselitsoe ka ho khetheha bakeng sa lamination ka hare PVC / PET / PC likarete.

Q6: Ke mehato efe ea ho laola boleng eo u e sebelisang?

Likahare tsohle li etsa tlhahlobo ea motlakase ea 100% le tlhahlobo ea pono.

Q7: Linako tse etellang pele tsa tlhahiso ke life?

Litaelo tsa mohlala: matsatsi a 3-7; Tlhahiso e kholo: matsatsi a 10-20 ho latela mokhoa oa ho itloaetsa.

Q8: Ke li-chips life tse teng?

Re ts'ehetsa letoto la NXP MIFARE®, NTAG®, ICODE®, Alien H3, UCODE, F08, le tse ling.

Q9: Na o ka fana ka liforomo tsa roll le sheet?

Ee. Melaetsa e Metsi ka meqolong; Dry Inlays ka sebopeho sa roll kapa lakane.

Q10: Na u tšehetsa khouto le ho ngola lintlha?

Ee. Re ka kenyelletsa EPC, UID, password, le data ea mosebelisi ho latela litlhoko tsa hau.

       Fumana sampole ea mahala le mantsoe a qotsitsoeng a morao-rao hona joale →