0,15–0,3mm PVC/PETG/PC Core Sheet finman ye kartiw kama

0,15–0,3mm PVC finman, PETG ani PC Core Sheet ka ɲɛsin karti dilanni ma

Wallis 0,15mm ani 0,3mm PVC finman, PETG ani PC core sheets dilannen don ka ɲɛsin plastiki karti dilanni baarakɛlaw ma. Ka kɛɲɛ ni fɛn sugandilenw hakɛ ye ani karti jɔcogo, o sɛbɛnw bɛ se ka kɛ layɛrɛw ye minnu bɛ se ka sɛbɛn, cɛmancɛ layɛrɛw jɔcogo walima layɛrɛ dɛmɛnanw ye ID kartiw kɔnɔ, banki kartiw, SIM kartiw, don kartiw, tɔndenw ka kartiw, kado kartiw ani RFID hakilitigi kartiw kɔnɔ.

B2B karti dilannikɛlaw fɛ, sɛbɛnfura finman min bɛnnen don, o ka kan ka bɛn sɛbɛnnikɛlan ma, lamini funteni, fɛn min bɛ datugu, puce walima antɛni jɔcogo ani karti dafalen laɲinilen janya. Wallis bɛ dɛmɛ don ka kɛɲɛ ni ladamu janya, sɛbɛnfura bonya, finman, yɔrɔ matte walima glossy, tigɛcogo ani misali sɛgɛsɛgɛli ye sani hakɛ ka dilan.

Fɛn dilannenw ɲɛfɔli

Paramɛtiri	Sɛgɛsɛgɛli min bɛ sɔrɔ
Fɛn minnu bɛ se ka sugandi	PVC / PETG / Polikarbonati (PC) .
Primaire Thickness Range (A ka gɛlɛn fɔlɔ).	0,15mm ani 0,30mm; bɛ se ka baro kɛ fɛn wɛrɛw kan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye
Sɛbɛnw hakɛw (Stand Sheet Sizes).	A4 / A3 / 295×485mm / 310×485mm / 500×600mm / ladamu sɛbɛn hakɛ
Ɲɛ	Kori finman; ladamu finman walima kulɛri bɛnkan bɛ sɔrɔ ka kɛɲɛ ni misali sɔnni ye
Surface Sugandili	Mate / glossy / printing-grade surface ka kɛɲɛ ni a kɛcogo ni a kɛcogo ye
Sɛbɛnni kɛcogo bɛnkan	Offset / UV / siliki ekran; nizɛri walima enki baara bɛ a ɲini ka dacogo ɲuman ni sɛgɛsɛgɛli kɛ
Baarakɛcogo	Sɛbɛnni, lamini, die-cutting, punching, chip embedding ani RFID/NFC inlay assembly
Formulaire de fourniture	Sɛbɛnw walima tigɛcogo minnu bɛ kɛ ka kɛɲɛ ni fɛn dilanni wajibiyalenw ye
Aplikasi minnu bɛ kɛ	ID kartiw, wari sarali kartiw, SIM kartiw, don kartiw, tɔndenw ka kartiw, kado kartiw ani smart kartiw
Misaliw ka Validation (Sɛbɛnni) Validation	A bɛ fɔ ka kɔn caman dilanni ɲɛ walasa ka sɛbɛnni, lamini, kulɛri ani karti-jɔcogo bɛnkan dafa

PVC, PETG walima PC White Core Sheet sugandicogo

PVC, PETG ani polikarbonati tɛ fɛnw ye minnu bɛ se ka ɲɔgɔn falen. Fɛn kelen-kelen bɛɛ bɛ ni baarakɛcogo finɛtiri ye, u ka gɛlɛya, u ka funteni jaabi ani u ka laɲini kɛcogo tɛ kelen ye. Sugandili ɲuman ka kan ka kɛ ka da karti jɔcogo dafalen kan sanni ka da sɔngɔ walima a bonya dɔrɔn kan.

Fɛnɲɛnɛma	fanga danma	B2B baarakɛcogo caman	Validation Focus
PVC Core sɛbɛnfura	Baarakɛcogo min musaka ka dɔgɔ, sɛbɛnnikɛcogo bɛnkan min ka bon ani karti dilanni baarakɛcogo sigilenw	Mɔgɔya kartiw, kado kartiw, lotɛli kartiw, ID karti standard ani smart card general	Vicat grade, surface dyne, roughness, thickness sabatili ani overlay bonding
PETG Kori sɛbɛn	Toughness ɲuman, flexibilité ani lamination compatibilité PETG walima karti composite structures kama	Karti premium, ID karti sugandilenw, karti hakilitigi minnu bɛ mɛn ani PVC/PETG composite structures	Lamini funteni, a dɔgɔyali, a sanfɛla tension, a peel fanga ani a ink system
PC Core sɛbɛnfura	Funteni kɛlɛli ka bon, masinw ka muɲuli barikama ani a bɛ bɛn lakana-karti jɔcogo ma	Gofɛrɛnaman ka IDw, bolifɛntigiyasɛbɛnw, doni karti lakananenw ani karti minnu bɛ kɛ ni laser ye	Laserable grade, layɛrɛ bɛnkan, lamination porogaramu ani fini-karti sɛgɛsɛgɛli

0,15mm vs 0,30mm Fini Core Sheet

Sɛbɛn janya ka kan ka jate i n’a fɔ karti dafalen kulu dɔ. Karti plastiki min dilannen don ni ISO ye, a ka c’a la, o bɛ sɛbɛnnikɛlan caman, core, inlay ani overlay layers caman fara ɲɔgɔn kan. O la, 0,15mm walima 0,30mm bɛ layini kelen-kelen ɲɛfɔ, a man kan ka kɛ karti laban janya ye.

Thickness	Typical Role	Sugandili jateminɛw
0,15mm ye	Layɛrɛ sɛbɛnnen finman, layɛrɛ dɛmɛnan, jɔli-yɔrɔ tilalen walima karti hakilitigi sigicogo caman-yɔrɔ	Nafa bɛ a la ni baarakɛminɛn caman ka kan ka don laɲini karti janya kɔnɔ; aw bɛ a sɛgɛsɛgɛ ko a bɛ flakɛ ani ka a minɛ sɛbɛnni kɛtuma na
0,30mm ye	Structural middle layer, thicker printed core walima dɛmɛ min bɛ puce ni antenne lajɛw lamini	A bɛ layɛrɛ janya caman di nka a ka kan ka balan ni datugulanw, fɛnw dontaw ani punch laban wajibiyalenw ye
Custom Thickness (Laada la).	Karti kulu kɛrɛnkɛrɛnnen, karti fila-fila, SIM karti walima karti yɛrɛmahɔrɔnyalen jɔli	Aw bɛ layɛrɛ ja di, laɲini laban janya ani lamini kɛcogo ni aw bɛ quotation ɲini

Jɔrɔ min bɛ White Core Sheet la karti lamininen jɔcogo la

Karti lamininen kɔnɔ, sɛbɛn ɲɛ finman bɛ basigi opaque dilan ja ni mɔgɔya kunnafoniw kɔfɛ k’a sɔrɔ a bɛ dɛmɛ don karti flakɛli n’a gɛlɛyali la. RFID walima NFC kartiw kama, core layɛrɛ kelen walima caman bɛ se ka antenne ni chip inlay lamini. A laban jɔli bɛ se ka kɛ fana ni sɛbɛnw ye minnu sɛbɛnnen don, dakun jɛlenw, magɛnni sɛrɛkiliw, lakana filimuw olografu ani siginiden panɛriw.

Layer Karti Imprimé

Sɛbɛnni-sɛbɛn finman min bɛ se ka kɛ, o bɛ kɔkanna jɛlen di sɛbɛnniw, fotow, barɔdiw ani marka jaw ma. Surface furakɛli ka kan ka sugandi enki ni sɛbɛnnikɛlan laɲininenw kama.

Structural Cɛmancɛ Layɛrɛ

Cɛmancɛ-yɔrɔ bɛ dɛmɛ ka gɛlɛya, flakɛli ani karti janya bɛɛ lajɛlen kɔlɔsi. A fɛn ka kan ka bɛn ni layini kɛrɛfɛtaw ye walasa ka dɔ bɔ a wulicogo, a bugun walima a ka bɔli la.

Smart Card ani RFID Inlay Dɛmɛ

Ni karti minnu tɛ ɲɔgɔn sɔrɔ walima minnu bɛ ni ɲɔgɔn cɛ fila ye, layɛrɛ dilanni ka kan ka yɔrɔ bɛnnen to antɛni, modulu ani ɲɔgɔndan yɔrɔ ye. Sample lamination ni kuran sɛgɛsɛgɛli ka ɲi sani u ka kɛ jamaba la.

Sɛbɛnni ni Surface Compatibilité

Fɛn min ɲɛfɔlen don ko 'printable' o tɛ bɛn a yɛrɛma sɛbɛnnikɛlan fɛɛrɛ bɛɛ ma. A ka c’a la, offset ni silk-screen karti sɛbɛnw bɛ u jigi da dugukolo girinya ni u gɛlɛya kan min bɛ kɔrɔsi, k’a sɔrɔ enki ni nizɛri sitɛmu dɔw bɛ se ka kɛ ni fɛn dɔ ye min bɛ se ka fɛnw minɛ. Sannikɛlaw ka kan ka sɛbɛnnikɛlan, enki taamasiyɛn, furakɛli fɛɛrɛ ani lamini kɛcogo wajibiyalen dɔn sani u ka kalata sugandi.

Sɛbɛnni kɛcogo	wajibiyalen sɛbɛnfura jateminɛw	Ladilikan minnu bɛ kɛ ka kɔn a dilanni ɲɛ
Offset sɛbɛnni	Dine hakɛ kɔrɔsilen, gɛlɛya bɛnnen, fin sabatilen ani enki bɛnkan	Enki nɔrɔli, jalen, kulɛri density ani post-lamination bond
UV Printing (UV sɛbɛnni).	Surface min bɛ bɛn UV ink ani curing energy ma k’a sɔrɔ a ma bɔgɔbɔgɔ kojugu	Cross-hatch adhesion, furakɛli cogoya, bending ani lamination test
Soie Écran Printing (Ecran de soie) min bɛ kɛ	Enki sitɛmu min bɛ bɛn PVC, PETG walima PC ma ani yɔrɔ furakɛli min bɛ kɔrɔsi	Adhesion, opacity, drying ani resistance lamination kɔfɛ
Inkjet walima Imprimerie numérique	A bɛ se ka kɛ ko a ka kan ka kɛ ni grade coated dedicated ye; core sheet gansan min ma datugu, o man kan ka jate ko a bɛ bɛn	Dot ɲɛfɔli, encre absorption, rub resistance ani coating-to-overlay bond

Fɛn dilanni ni jogoɲumanya kɔlɔsili wajibiyalenw

• Janya sabatili : a bɛ dɛmɛ don kariti-stack jatebɔw la minnu bɛ se ka fɔ ka ɲɛ ani lamination uniforme.

• Flatness : a bɛ sɛbɛnw baloli, u tɔgɔ sɛbɛnni, u dalajɛli ani u tigɛcogo ɲɛ.

• Fɛnɲɛnɛma ni kulɛri bɛrɛbɛrɛ : o bɛ dɛmɛ ka kulɛri sɛbɛnnenw mara minnu bɛ se ka segin-ka-bɔ, fɛn dilanni yɔrɔw bɛɛ kɔnɔ.

• Surface dyne ani roughness: influence ink adhesion ani sɛbɛnni ɲɛfɔli.

• Vicat ni thermal response : ka kan ka bɛn lamination cycle sugandilen ni a kɛrɛfɛfɛnw ma.

• Lamination bond : ka kan ka jateminɛ ni overlay yɛrɛ ye, ink ani production minɛnw.

• Finished-card performance: ka bending, punching, chip function, antenna kalanni ani surface cogoya sɛgɛsɛgɛ.

0,15–0,3mm Karti finman Core Sheet kɛcogo

PVC, PETG ani PC core sheets finmanw bɛ di karti iziniw ma, mɔgɔya birow, inlay dilannikɛlaw, lakana-sɛbɛnw dilannikɛlaw ani karti-fɛnw tilabaga. Fɛn laban hakɛ ka kan ka sugandi ka kɛɲɛ ni karti suguya ye ani baarakɛcogo minnu bɛ makɔnɔ.

• Banki, wari sarali ani karti minnu bɛ sara ka kɔn

• Baarakɛla, kalandenw ani baarada ka ID kartiw

• Access-control ani lotɛli kilisi kartiw

• SIM ni telefɔni kartiw

• Mɔgɔya, kantigiya ani kado kartiw

• RFID, NFC ani karti hakilitigi fila-fila

• Bololabaarakɛlaw ka lakɔliso sɛbɛnw ani mɔgɔ tɔgɔladonni kartiw sugandilenw

Sample Approval ani B2B Order Process

Step	Sannikɛla ka kunnafoniw	Ladilikan Sɛgɛsɛgɛli
1. Fɛn minnu bɛ kɛ ka fɛnw sugandi	PVC, PETG walima PC; laɲini karti suguya ani baarakɛcogo wajibiyalenw	Aw bɛ fɛnw bɛn ɲɔgɔn ma ni karti kulu dafalen ye
2. Sɛgɛsɛgɛli Dafalen	A bonya, a bonya, a finman, a sanfɛla, a hakɛ ani a foroko	TDS, tolerances ani production seko lajɛ
3. Misaliw sɛgɛsɛgɛli	Imprimante, encre, overlay, laminateur ani karti-layer ja	Sɛbɛnni, lamini, punch ani karti dafalen sɛgɛsɛgɛliw
4. Sanuman misali sɔnni	Kulɛri, a sanfɛla, a bonya ani a dafalen-karti jaabi min dabɔra	Reference approvée mara walasa ka sɛgɛsɛgɛli kɛ fɛn dilanni ni nataw kan
5. Baara kɛli ni fɛn caman ye	Koman laban hakɛ, pake taamasiyɛnw ani cicogo sariyaw	Batch inspection ka kɛɲɛ ni specification dagalen ye

Foroko ni Dugukolo kan fɛnw cicogo

Karti finman kɔnɔna sɛbɛnw ka kan ka lakana ka bɔ ji la, buguri la, ka u biri, ka yɔrɔ nɔgɔ ani ka funteni kojugu u marali ni u ta waati. Wallis bɛ se ka PE-filimu lakanani di, ka ji sirili kɛ, ka kartɔnw, palɛtiw ani cikan sɛbɛnw di minnu bɛ kɛ ka kɛɲɛ ni sɛbɛnfura cogoya ye ani komandi hakɛ ye.

Mun na Source White Card Core Sheets ka bɔ Wallis fɛ?

Wallis bɛ diɲɛ karti dilannikɛlaw dɛmɛ ni PVC, PETG ani PC core sheets, overlay films ani karti fɛnw ye minnu bɛ tali kɛ o la. Fɛnw dilancogo bɛ se ka kɛ fɛnw sugandili ye, sɛbɛnw hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, yɔrɔ suganditaw, misali labɛnni, karti-jɔcogo lajɛ ani ka taa ni u ye jamana wɛrɛw la.

• Karti-minɛn caman sugandilenw ka bɔ feerekɛla kelen fɛ

• Ladamuni, a bonya, a sanfɛla ani a kulɛri yiriwali

• Misaliw ye sɛbɛnni ni lamination validation ye

• Dɛmɛ don karti kɔnɔna na, a dacogo la ani smart-card layer matching la

• Batch specification ani Golden Sample sɔnni baarakɛcogo

• Baarakɛlaw ka jagokɛyɔrɔw ka pakew B2B komandiw kama

Ɲininkali minnu bɛ kɛ tuma caman na

Danfara jumɛn bɛ karti kɔnɔna sɛbɛn ni filimu min bɛ datugu?

Sɛbɛn koloma dɔ bɛ kɛ karti sɛbɛnnen walima a jɔcogo farikolo ye. A ka c’a la, datugulan ye kɛnɛma lakananifɛn finman ye min bɛ bila sɛbɛnfura sanfɛ. Baara tigitigi bɛ bɔ karti dilanni na ani a kɔnɔfɛnw hakɛ la.

Yala 0,15mm bɛnnen don plastiki karti dafalen ma wa?

A ka c’a la, 0,15mm ye layini kelen ye karti caman kɔnɔ sanni ka kɛ karti dafalen dafalen ye. A laban jɔli bɛ se ka kɛ ka core sheets fila walima caman fara ɲɔgɔn kan, RFID inlay ani protective overlays.

Tuma jumɛn na ne ka kan ka 0,30mm core sheet sugandi?

0,30mm sɛbɛn bɛ se ka sugandi ni karti jɔcogo mago bɛ cɛmancɛ lamini na min ka bon walima ni dɛmɛ wɛrɛ ye ka puwɛnti walima antɛni inlay lamini. Sugandili laban ka kan ka jate ni layɛrɛ tɔw bɛɛ ye.

Fɛn jumɛn de ka fisa ni tɔndenw ye walima kado kartiw ye minnu bɛ kɛ ka kɛɲɛ ni sariya ye?

A ka c’a la, PVC bɛ sugandi walasa ka karti dilan min musaka ka dɔgɔ, min hakɛ ka ca. Sannikɛlaw ka kan ka dugukolo sanfɛla hakɛ, sɛbɛnni kɛcogo, lamini funteni ani karti si hakɛ wajibiyalenw dafa hali bi.

Tuma jumɛn na PETG core sheet ye sugandi bɛnnen ye?

PETG bɛ se ka jateminɛ kariti jɔcogo la minnu bɛ gɛlɛya ɲuman wajibiya ani PETG walima lamination composite. Misali sɛgɛsɛgɛli ka kan bawo PETG ka funteni baarakɛcogo finɛtiri tɛ kelen ye ni PVC ni PC ye.

Tuma jumɛn na sannikɛla ka kan ka polikarbonati koloma sɛbɛn ɲɛfɔ?

PC bɛ jateminɛ tuma caman na karti jɔcogo lakananiba ni ɲɛnamaya jan na, kɛrɛnkɛrɛnnenya la ni laser personalisation walima lamination funteni caman bɛ o la. Sannikɛla ka kan k’a jira ni laserable grade (laserable grade) wajibiyalen don.

Yala o sɛbɛn kelen bɛ se ka kɛ ka offset ni inkjet sɛbɛnni kɛ wa?

A tɛ kɛ a yɛrɛma. Offset ni silk-screen sɛbɛnw bɛ se ka kɛ ni fini tɛ u la, k’a sɔrɔ enki sɛbɛnni ka teli ka kɛ ni finimugu kɛrɛnkɛrɛnnen ye min bɛ se ka ja minɛ. Aw bɛ sɛbɛnnikɛlan ni tintiri kunnafoniw di sani aw ka komandi kɛ.

Yala Wallis bɛ se ka sɛbɛnfura hakɛ ni a janya kɛ ka kɛɲɛ ni a yɛrɛ sago ye wa?

Awɔ. Baro bɛ se ka kɛ ka kɛɲɛ ni karti-layer ja, imprimante cogoya, laminatɛri hakɛ ani hakɛ wajibiyalenw ye.

Yala o sɛbɛnw bɛ se ka kɛ RFID ni NFC kartiw ye wa?

Ɔwɔ, kalasi bɛnnenw bɛ se ka kɛ RFID walima NFC inlays lamini na. A jɔli dafalen ka kan ka sɛgɛsɛgɛ ni lamini sirili ye, antɛni baarakɛcogo, puce sirili ani karti dafalen flakɛli.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw ye fɛn dilannenw, u bonya, u sɛbɛnfura hakɛ, u ɲɛda fini, u finman walima u kulɛri, sɛbɛnni kɛcogo, u datugucogo, u hakɛ, u foroko wajibiyalenw ani u ka karti laɲinitaw di.

Yala a ka ɲi ka misali ta sani u ka kɛ caman ye wa?

Awɔ. Misaliw b’a to sannikɛla bɛ se ka enki nɔrɔli, a kulɛri, a laminicogo, a tigɛcogo, a puce walima a antenne baarakɛcogo ani a ka karti laban jɔcogo kɔrɔbɔ sani a ka sɔn a hakɛ bɔli ma.

Karti finmanw ka kan ka mara cogo di?

Aw bɛ fɛn in datugu a foroko fɔlɔ kɔnɔ, ka a tanga ji, buguri, tile yeelen tilennen ma, tansiyɔn gɛlɛn ma ani funteni jiginnibaw ma. Aw bɛ sɛbɛnfura mara ka kɛ fla ye fo ni a foroko dagalen y’a jira cogo wɛrɛ la.

Aw ye Sample ani Factory Quotation ɲini

Aw ye aw ka karti-layer ja ci Wallis ma, fɛn wajibiyalenw, a janya, a sɛbɛn hakɛ, a sɛbɛnni kɛcogo ani a komandi hakɛ. An ka jɛkulu bɛna dɛmɛ ka PVC finman, PETG walima PC core-sheet grade bɛnnen dɔ dɔn min bɛ kɛ ka misali sɛgɛsɛgɛli kɛ ani ka B2B dilan.