Custom PMMA Acrylic yeelen ɲɛminɛlan plati ni Laser Dots

Custom PMMA Acrylic yeelen ɲɛminɛlan plati ni Laser Dots

Wallis bɛ PMMA yeelenbɔlanw (LGP) dilan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ni laser dots tigitigiw ye LED yeelenbɔlanw kama, piblisite jiralanw, feerekɛyɔrɔw, sanfɛla yeelenw, menu boards ani baarakɛminɛn wɛrɛw kama minnu bɛ yeelen bɔ dakunw na. Optique dot pattern bɛ yeelen min bɛ don ka bɔ panɛri da la, o bila sira wɛrɛ kan, k’a tila-tila yeelen yɔrɔ bɛɛ la walasa ka bɔ kɛnɛ kan, min bɛ kɛ cogo kelen na.

A bɛ sɔrɔ milimɛtɛrɛ 3–12 janya la , a hakɛ ladamulen ani a ɲɛ kelen walima a fan fila yecogo, PMMA LGP kelen-kelen bɛɛ bɛ se ka bɛn panɛri hakɛ ma, LED jɔyɔrɔ, yeelen-donna da ani baarakɛcogo wajibiyalen. Wallis fana bɛ laser dotting, V-cutting, CNC tigɛ, drilling, edge polishing, saniya ani export pakew dɛmɛ fana OEM ani poroze yamaruyaw kama.

A ɲini ka Custom LGP Quote sɔrɔ

PMMA Yeelen ɲɛminɛlan plati ɲɛfɔli

Laser-Dotted PMMA Yeelen ɲɛminɛlan bɛ baara kɛ cogo min na

1. LED yeelen bɛ don ka tɛmɛ a da polisilen fɛ

LED sɛrɛkiliw walima moduluw bɛ bila ka surun panɛri polisilen kelen walima caman na. LED yeelenbɔlan ni PMMA dakun cɛ ɲɔgɔndan ɲuman bɛ yeelen jɛɲɔgɔnya ɲɛ ani ka ɲɛnayeli bɔnɛ min bɛ se ka bali, o dɔgɔya.

2. Yeelen bɛ Taa PMMA Panɛli fɛ

PMMA panɛli bɛ yeelen min bɛ na, o bilasira a sanfɛla la. Panɛli janya, a bonya, a dakun cogoya, LED fɔcogo ani yeelen-don dakunw hakɛ, olu bɛɛ bɛ nɔ bila yeelen bɛ taa yɔrɔ min na ani sistɛmu laban bɛ baara kɛ cogo min na.

3. Dot Pattern bɛ yeelen bɔ cogo kelen na

Laser yɔrɔ minnu dilannen don ɔridinatɛri fɛ, olu bɛ yeelen sira kɔnɔna tigɛ ani ka yeelen yɔrɔ minnu bɛ kɔrɔsi, olu bila ka bɔ panɛri sanfɛ. Dot hakɛ, a juguman ani a yɔrɔjan bɛ se ka ladilan ka kɛɲɛ ni yɔrɔjan ye ka bɔ LED sɔrɔyɔrɔ la walasa ka yeelenbɔlanw yelenw, dibi yɔrɔw ani yeelen danfara minnu bɛ cɛmancɛ ni da la, olu dɔgɔya.

Nafa jɔnjɔn minnu bɛ LED yeelenbɔlan ni jiralan porozɛw la

Yeelen min bɛ kɛ Surface Uniforme ye

Porozɛ kɛrɛnkɛrɛnnen laser dot layout bɛ dɛmɛ ka dawolo yeelen tila-tila panɛri dafalen kɔnɔ sanni ka yeelen lajɛ ka surunya LED sɛrɛkiliw la. O bɛ dɛmɛ don ka yecogo saniyalen sɔrɔ ja, taamasiyɛnw, etajɛriw ani yeelen masirilenw na.

Slim Edge-Lit ka baarakɛyɔrɔ

Ikomi LEDw bɛ sigi panɛri da la, PMMA LGP bɛ se ka yeelenbɔlan finmanw dɛmɛ, taamasiyɛn fitininw, fɛnw bilayɔrɔ yeelenlenw ani jiralanw jɔcogo minnu ka dɔgɔ, yɔrɔ minnu na kɔkanna yeelen jugumanba kɔrɔlen tɛ bɛn.

Customization Optique ani Mecanique Flexible

Wallis bɛ se ka panɛri janya, a bonya, a bonya, a cogoya, dingɛ jɔyɔrɔ, a dakunw, a dakunw, a yeelen dondaw, a laser dot density, a bɔli sira ani a dakunw furakɛli ka kɛɲɛ ni sannikɛla ka ja ni a lajɛcogo ye.

A bɛnnen don Prototype ani Production Orders ma

Ni komandi hakɛ fitinin ye fɛn kelen ye, kiliyanw bɛ se ka prototype dɔ jateminɛ ni LEDw, reflecteur, diffuseur, frame ani baarakɛcogo laɲininenw ye sanni u ka production commande belebeleba dɔ dafa.

PMMA Acrylic Light Guide Plates ka baarakɛcogo

• LED piblisite yeelenbɔlanw ani afiriki yeelenbɔlanw

• Fiyeerekɛyɔrɔw yeelen, jiralanw ani jiralanw

• Meniw pankurunw, sira ɲinini taamasiyɛnw ani ja minnu bɛ yeelen bɔ kɔfɛ

• Plafond panneaux ani kɔnɔna masirilanw

• SEG fini yeelenbɔlanw ani ɲɛjirali jiralanw

• Jagokɛyɔrɔw, minɛnw yeelenlenw ani fɛn dilanni fɛnw

Laser Dots ni V-Tigɛcogo

Baarakɛcogo min bɛnnen don kosɛbɛ, o bɛ bɔ yeelenbɔcogo dafalen na. Wallis bɛ se k’i ka ja lajɛ, LED labɛncogo ani yɔrɔ yeelenma laɲini sani a ka laser dots, V-cutting lines walima poroze kɛrɛnkɛrɛnnen faralen ɲɔgɔn kan.

Customization Sugandili OEM ani Porozɛ Sannikɛlaw ye

• A bonya ni a janya: Panɛli janya, a bonya ani a janya sugandili minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Panɛli cogoya: Kɛrɛnkɛrɛnnenya la, kɛnɛw ani CNC -cut custom contours ka da jaw kan.

• Yeelen-doncogo: Dakun kelen, dakun fila walima dakun caman dilancogo ka kɛɲɛ ni ɲɛnayeli labɛncogo ye.

• Emission direction: Yɔrɔ minnu bɛ ye, olu ye fan kelen walima fan fila ye.

• Dot walima line pattern: Laser dot density walima V-cutting design min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Masina baarakɛcogo : CNC tigɛ, sɔgɔli, sɔgɔli, notch, polisi ani dakun fini.

• Foroko: Foroko lakanani, kartɔnw ani jirikɛsu minnu bɛ kɛ ka taa ni u ye jamana wɛrɛw la.

Baro kɛ I ka Custom Design kan

Fɛn minnu ka kan ka di walasa ka LGP ​​Quotation tigitigi sɔrɔ

Walasa ka ɛntɛrinɛti seginnkanni waati surunya ani ka quotation tiɲɛni ɲɛ, aw bɛ nin kunnafoni caman di:

• Panɛli janya, a bonya, a bonya ani a hakɛ dafalen

• PDF, DWG walima DXF ja min bɛ ni dingɛw, slow, notches ani tolerances ye

• LED suguya, LED fɔcogo, kulɛri funteni ani baarakɛcogo fanga

• LED jɔyɔrɔ ani yeelen-donna dakunw hakɛ

• Yeelen min bɛ kɛ fan kelen walima fan fila fɛ, o wajibiyalen don

• Reflecteur, diffuseur, frame juguman ani funteni-bɔli jɔcogo

• Laɲini yeelen, yecogo kelen ani filɛli yɔrɔ yeelenma

• Edge polishing, protective film, saniya ani pakew dilanni wajibiyalenw

Prototype Testing Sani ka Mass Production kɛ

Yeelen laban ni kelenya bɛ bɔ ɲɛnayeli lajɛ dafalen na sanni ka kɛ PMMA plati dɔrɔn ye. LED bɔli, LED ni dakun cɛ janya, dakunw sɔgɔli, panɛri hakɛw, reflecteur, diffuseur, frame tansiyɔn, funteni cogoyaw ani fanga sigicogo bɛɛ bɛ se ka nɔ bila o nɔ na.

Porozɛ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, Wallis b’a ɲini ka prototype dɔ jateminɛ ni kiliyan ka LED sɔrɔyɔrɔ ni a lajɛyɔrɔw laɲinitaw ye. O kɔfɛ, sɛgɛsɛgɛli jaabiw bɛ se ka kɛ ka doti cogoya n’a dilanni kunnafoniw dafa sani u ka kɛ jamaba la.

Fɛn dilanni, pakew dilanni ani jamana kɔkan dɛmɛni

Wallis bɛ dɛmɛ don yɔrɔ kelen na ka ɲɛsin PMMA yeelenbɔlan porozew ma minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, i n’a fɔ fɛnw tigɛcogo, laser dot baarakɛcogo, V tigɛcogo, CNC dilanni, dakunw labɛnni, saniya, sɛgɛsɛgɛli, lakanani pakew dilanni ani fɛnw cicogo labɛnni.

Mun na i bɛ Wallis sugandi ka kɛ i ka PMMA LGP feerela ye?

Custom Optical Pattern Dɛmɛn

Laser dot density bɛ se ka ladilan ka kɛɲɛ ni panɛli hakɛ ye, LED sigiyɔrɔ, yeelen doncogo sira ani yeelen yɔrɔ wajibiyalen sanni ka misali jenɛriki kelen kɛ porozɛ bɛɛ la.

Fabrication Seko ni dɔnko jɛlen

Sannikɛlaw bɛ se ka fɛnw dilancogo, ɲɛnayeli misali baarakɛcogo, CNC cogoya, sɔgɔli, sɔgɔli ani fɛnw bɔli fara ɲɔgɔn kan feerelikɛla kelen sababu fɛ, ka dɔ bɔ bololabaarakɛlaw danfaralenw ni ɲɔgɔn cɛ.

Misali-Teriya MOQ

Koman fitinin min bɛ kɛ yɔrɔ kelen na, o bɛ porozɛw jateminɛni dɛmɛ, ka prototypew dilanni ani ɲɛnayeli sɛgɛsɛgɛli kɛ sanni sannikɛlaw ka u yɛrɛ bila fɛn dilanni hakɛw la.

B2B Porozɛ ka kumaɲɔgɔnya

Wallis bɛ baara kɛ ni yeelen dilannikɛlaw ye, taamasiyɛn dilannikɛlaw, jiralikɛnɛ dilannikɛlaw, baarakɛlaw ani sannikɛlaw ka jɛkuluw minnu bɛ hakɛw ɲini minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka ja dilan, ka segin ka fɛnw dilan ani ka fɛnw bila jamana kɔkan.

I ka ja ci walasa ka segin a kan

A ka di kiliyanw ye diɲɛ fan bɛɛ

Sosiyete ka don o don baarakɛcogo

Ɲininkali minnu bɛ kɛ tuma caman na

PMMA akiriliki yeelen ɲɛminɛlan ye mun ye?

PMMA yeelen ɲɛminɛlan ye panneau acrylique optique ye min bɛ yeelen sɔrɔ ka bɔ LEDw la minnu sigilen bɛ dakun kelen walima dakun caman na, ka o yeelen tila-tila yɔrɔ yeelenmaba dɔ kan laser yɔrɔw fɛ, layini jalenw walima bɔli fɛn wɛrɛw fɛ.

LGP min bɛ kɛ ni laser ye, o bɛ dɔ bɔ dibi yɔrɔw la cogo di?

Laser yɔrɔw danfara ni u ni ɲɔgɔn cɛ bɛ ɲɔgɔn falen-falen pankurun kɔnɔ walasa ka yeelen caman walima dɔgɔya bɔ yɔrɔw la minnu tɛ kelen ye. Pattern min dilannen don ka ɲɛ, o bɛ yɔrɔjan caman caman cili musaka bɔ LED sɔrɔyɔrɔ la ani ka yeelen tilatilali ɲɛ.

Danfara jumɛn bɛ LGP ni diffuser sheet cɛ?

LGP bɛ yeelen ta ani k’a bɔ LEDw la minnu bɛ da da la. A ka c’a la, difiyɛri sɛbɛn bɛ bila LGP ​​ɲɛfɛ walasa ka yeelen bɔlen nɔgɔya, ka dɔ bɔ doti yelenw cogoyaw la ani ka filɛli laban cogoya ɲɛ.

Yala PMMA yeelen ɲɛminɛlan mago bɛ yeelenbɔlan na wa?

Yeelen-yɔrɔ kelen-kelen fanba bɛ baara Kɛ ni kɔfɛ-yɔrɔ ye walasa ka yeelen jigin ka Taa filɛli yɔrɔ la ani ka ɲɛnayeli bɔnɛ dɔgɔya. Reflector ni diffuseur laban cogoya ka kan ka sɛgɛsɛgɛ i n’a fɔ lajɛ dafalen dɔ.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Wallis bɛ PMMA yeelen ɲɛminɛlanw di minnu janya bɛ daminɛ milimɛtɛrɛ 3 la ka se milimɛtɛrɛ 12 ma. Janya min bɛ fɔ, o bɛ bɔ panɛri hakɛw la, LED pakew, yeelen taama janya la, a jɔcogo ani a sigiyɔrɔ min bɛ sɔrɔ.

Yala Wallis bɛ se ka laser dot density kɛ ka kɛɲɛ ni a yɛrɛ sago ye wa?

Awɔ. Dot density bɛ se ka dilan ka kɛɲɛ ni panɛli dafalen hakɛ ye, PMMA janya, LED jɔyɔrɔ, LED fɔcogo, dondaw dakun hakɛ, bɔli sira ani laɲini yeelen yɔrɔ.

Yala LGP ​​bɛ se ka CNC tigɛ, ka sɔgɔ walima ka sɔgɔ wa?

Awɔ. Wallis bɛ se ka CNC tigɛ, dingɛ, sɔgɔli, nɔnɔ, dakun sɔgɔli ani fɛn wɛrɛw di ka kɛɲɛ ni kiliyanw ka ja ye ani porozɛ ka ɲininiw.

Koman hakɛ fitinin ye mun ye?

Koman hakɛ fitinin ye fɛn kelen ye, o b’a to a bɛ se ka kɛ ka prototype komandi walasa ka fitinin, ɲɛnayeli ani lajɛ sɛgɛsɛgɛli kɛ sani a ka kɛ jamaba ye.

A ka c’a la, a dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, misaliw bɛ labɛn baarakɛdon 3–7 ɲɔgɔn kɔnɔ sarali ni fɛɛrɛko dafalen kɔfɛ. A ka c’a la, jamaba dilanni bɛ dɔgɔkun 2–5 ɲɔgɔn ta, ka kɛɲɛ ni komandi hakɛ ye, baarakɛcogo gɛlɛya ani sɛnɛko waati bolodalen min sɛgɛsɛgɛra.

Ne ka kan ka dosiye jumɛnw ci walasa ka quotation kɛ ka kɛɲɛ ni mɔgɔw sago ye?

Aw bɛ PDF, DWG walima DXF ja ci ka fara a janya, a hakɛ, LED labɛncogo, yeelen doncogo dakunw, bɔli sira kan, yeelenbɔlan ni difiyɛri kunnafoni, dakunw furakɛli ani a foroko wajibiyalenw.