Amanneɛbɔ PMMA Acrylic Hann Akwankyerɛ Mprɛte a Laser Dots

Amanneɛbɔ PMMA Acrylic Hann Akwankyerɛ Mprɛte a Laser Dots

Wallis yɛ amanne kwan so PMMA acrylic hann akwankyerɛ mprɛte (LGPs) a pɛpɛɛpɛ laser nsensanee ma LED kanea nnaka, dawurubɔ kyerɛwtohɔ, aguadidan shelves, ɔdan atifi kanea, menu boards ne afoforo edge-lit applications. Optical dot pattern no dan hann a efi panel no ano hyɛn mu no kwan na ɛkyekyɛ wɔ hann no so ma ɛyɛ hyew na ɛkɔ so daa.

Available in 3–12 mm thicknesses , amanne nsusuwii ne ɔfã biako anaa abien-afã aniwa nhyehyɛe, biara PMMA LGP betumi ahyia ne panel kɛse, LED gyinabea, hann-input ano ne dwumadie a wɔhwehwɛ. Wallis nso boa laser dotting, V-cutting, CNC twa, drilling, edge polishing, ahotew ne export packaging ma OEM ne project orders.

Bisa sɛ wɔmfa Custom LGP Quote mma

PMMA Hann Akwankyerɛ Mprɛte Nkyerɛkyerɛmu

Sɛnea Laser-Dotted PMMA Hann Akwankyerɛ Mprɛte Yɛ Adwuma

1. LED Hann Fa Polished Edge no Mu Hyɛn Mu

Wɔde LED strips anaa module ahorow no si baabi a ɛbɛn panel anoano biako anaa nea ɛboro saa a wɔayɛ no fɛfɛɛfɛ. LED hann fibea ne PMMA ano a ɛne ne ho hyia yiye no ma hann a ɛka bom no tu mpɔn na ɛtew aniwa mu adehwere a wobetumi akwati so.

2. Hann Tu Fa PMMA Panel no mu

PMMA panel no kyerɛ hann a ɛba no kwan fa ne soro. Panel no mu duru, ne nsusuwii, ano tebea, LED nnyigyei ne hann-input ano dodow nyinaa nya baabi a hann no tu kwan ne sɛnea nhyehyɛe a etwa to no yɛ adwuma no so nkɛntɛnso.

3. Dot Pattern no Yi Hann Pɛpɛɛpɛ

Laser nsensanee a wɔde kɔmputa ayɛ no twa hann kwan a ɛwɔ mu no mu na ɛde hann afã horow a wɔahyɛ so no fa panel no ani kɔ. Wobetumi asiesie dot kɛseɛ, emu dɔ ne ne ntam kwan sɛdeɛ kwan a ɛda LED fibea no ntam teɛ de atew hann nhama a wotumi hu, mmeaeɛ a ɛyɛ sum ne mfimfini kɔsi hann nsonsonoeɛ so.

Mfaso Titiriw a Ɛwɔ LED Light Box ne Display Projects ho

Uniform Surface Hann a Wɔde Ma

A project-specific laser dot layout boa kyekyɛ edge hann wɔ panel a edi mũ no so sen sɛ ɛbɛtwe adwene asi hann a ɛbɛn LED strips no so. Eyi boa aniwa a ɛho tew a efi mu ba ma mfonini, nsɛnkyerɛnne, shelves ne decorative kanea.

Slim Edge-Lit Adansi a Wɔde Yɛ Adwuma

Esiane sɛ wɔde LED ahorow no ahyɛ panel no ano nti, PMMA LGP betumi aboa kanea nnaka a ɛyɛ tratraa, nsɛnkyerɛnne a ɛyɛ ketewaa, shelves a hann wom ne display structures a ɛba fam wɔ baabi a akyi kanea a emu dɔ a wɔtaa de di dwuma no mfata.

Flexible Optical ne Mfiridwuma Customization

Wallis betumi ayɛ panel tenten, ne tɛtrɛtɛ, ne kɛse, ne nsusuwii, tokuru gyinabea, slots, notches, hann-input anoano, laser dot density, emitting akwankyerɛ ne ano aduru sɛnea adetɔfo no mfonini ne nhyiam nhyehyɛe te.

Ɛfata ma Prototype ne Production Orders

Sɛ anyɛ yiye koraa no, ade dodow a wɔkra no yɛ ade biako a, adetɔfo betumi de LED ahorow, reflector, diffuser, frame ne adwumayɛ tebea a wɔahyɛ da ayɛ no asusuw nhwɛsode bi ho ansa na wɔasi ahyɛde kɛse a wɔayɛ no so dua.

PMMA Acrylic Hann Akwankyerɛ Mprɛte a Wɔde Di Dwuma

• LED dawurubɔ kanea nnaka ne poster frame ahorow a hann wom

• Retail shelf kanea, showcases ne display cabinets

• Menu boards, wayfinding signs ne mfonini ahorow a ɛhyerɛn wɔ akyi

• Ceiling panels ne kanea a wɔde asiesie dan no mu

• SEG ntama kanea nnaka ne ɔyɛkyerɛ ahorow a wɔde kyerɛ

• Aguadi mu nneɛma a wɔde si dan mu, nneɛma a wɔde kanea ayɛ ne adansi ho nneɛma

Laser Dots vs. V-Ntrɛwmu a Wɔde Twitwa

Ɔkwan a ɛfata sen biara a wɔfa so yɛ adwuma no gyina kanea nhyehyɛe a edi mũ no so. Wallis betumi ahwɛ wo mfonini, LED nhyehyɛe na ɔde n’ani asi beae a hann wɔ so ansa na wakamfo laser dots, V-cutting lines anaa adwuma pɔtee bi a wɔaka abom akyerɛ.

Nneɛma a Wɔapaw ama OEM ne Dwumadie Adetɔfoɔ

• Nsusuwii ne ne kɛse: Amanne panel tenten, ne tɛtrɛtɛ ne 3-12 mm kɛseyɛ options.

• Panel nsusuwii: Rectangles, squares ne CNC -twitwa amanne contours a egyina mfonini ahorow so.

• Hann-input nhyehyɛe: Nsusuwii a ɛwɔ ano biako, ano abien anaa ano pii sɛnea optical nhyehyɛe no te.

• Emission direction: Nneɛma a wotumi hu a ɛwɔ afã biako anaa abien.

• Dot anaa line nhwɛso: Customized laser dot density anaa V-twitwa nhyehyɛe.

• Mfiridwuma mu dwumadie: CNC twa, drilling, slots, notches, polishing ne edge finishing.

• Nneɛma a wɔde kyekyere: Nneɛma a wɔde bɔ nneɛma ho ban, nnaka ne nnua nnaka a wɔde bɛkɔ amannɔne.

Ka Wo Amanneɛbɔ Nsusuwii Ho Nsusuwii

Nea Ɛsɛ sɛ Wɔde Ma Ma LGP ​​Quotation a Ɛyɛ Pɛ

Sɛnea ɛbɛyɛ a wobɛtew mfiridwuma mu nhwehwɛmu bere so na ama nsɛm a wɔafa aka no ayɛ pɛpɛɛpɛ no, yɛsrɛ sɛ fa nsɛm a edidi so yi pii ma sɛnea wubetumi:

• Finished panel tenten, ne tɛtrɛtɛ, ne kɛse ne dodow

• PDF, DWG anaa DXF mfonini a ɛwɔ ntokuru, slots, notches ne tolerances

• LED type, LED pitch, kɔla hyew ne adwumayɛ tumi

• LED gyinabea ne dodow a hann-input anoano

• Kanea a ɛwɔ ɔfã biako anaa afã abien a wɔhwehwɛ

• Reflector, diffuser, frame bun ne ɔhyew-dissipation nhyehyɛe

• Target hann, aniwa a ɛyɛ pɛ ne hann a ɛhwɛ beae

• Edge polishing, ahobammɔ film, ahotew ne packaging ahwehwɛde

Prototype Sɔhwɛ Ansa na Wɔreyɛ Mass Production

Hann a etwa to ne pɛyɛ gyina optical nhyiam a edi mũ no so sen PMMA mprɛte no nkutoo. LED output, LED-to-edge kwan, edge polishing, panel dimensions, reflector, diffuser, frame nhyɛso, ɔhyew tebea ne tumi nhyehyɛe nyinaa betumi anya nea efi mu ba no so nkɛntɛnso.

Wɔ amanne kwan so adwuma bi ho no, Wallis kamfo kyerɛ sɛ wɔmfa LED fibea ne nhyiam afã horow a adetɔfo no abɔ wɔn tirim sɛ wɔbɛyɛ no nsusuw nhwɛsode bi ho. Afei wobetumi de nea efi sɔhwɛ mu aba adi dwuma de asi dot pattern ne fabrication ho nsɛm so dua ansa na wɔayɛ no pii.

Nneɛma a Wɔyɛ, Nneɛma a Wɔde Gu Mu ne Nneɛma a Wɔde Kɔ Amannɔne Mmoa

Wallis de mmoa a ɛkɔ baabiara ma amanne kwan so PMMA hann akwankyerɛ mprɛte nnwuma, a nneɛma a wɔde twa, laser dot dwumadie, V-twitwa, CNC fabrication, anoano polishing, ahotew, nhwehwɛmu, ahobammɔ packaging ne shipment ahosiesie ka ho.

Dɛn Nti na Wopaw Wallis sɛ Wo PMMA LGP Supplier?

Amanneɛbɔ Optical Nhwɛso Mmoa

Laser dot density betumi ayɛ nsakrae sɛnea panel kɛse, LED beae, hann-input akwankyerɛ ne ahwehwɛde hann beae sen sɛ wɔde generic nhwɛso biako bedi dwuma wɔ adwuma biara mu.

Nneɛma a Wɔde Yɛ Nneɛma a Wɔaka abom

Adetɔfo betumi de nneɛma a wɔde ma, optical pattern processing, CNC shaping, drilling, polishing ne export packing abom denam adetɔnfo biako so, na ɛtew nsa a wɔde ma wɔ processors ahorow ntam no so.

Nhwɛso-adamfofa MOQ

Ade biako a ɛba fam koraa a wɔkra boa adwuma no nhwehwɛmu, nhwɛsode nkɔso ne aniwa sɔhwɛ ansa na adetɔfo ahyɛ bɔ sɛ wɔbɛyɛ dodow.

B2B Dwumadie Nkitahodi

Wallis ne wɔn a wɔyɛ kanea, wɔn a wɔyɛ nsɛnkyerɛnne, wɔn a wɔyɛ nneɛma a wɔde kyerɛ, wɔn a wɔyɛ adwuma wɔ apam mu ne akuw a wɔtɔ nneɛma a ɛhwehwɛ sɛ wɔyɛ nneɛma a wɔahyɛ da ayɛ, mfonini ahorow, nneɛma a wɔyɛ no mpɛn pii ne nea wɔde kɔ amannɔne no yɛ adwuma.

Fa Wo Mfonini no Mena ma Wɔnhwɛ Mu

Nea agye din wɔ adetɔfo a wɔwɔ wiase nyinaa mu

Company no da biara da dwumadi

Nsɛm a Wɔtaa Bisa

Dɛn ne PMMA acrylic hann akwankyerɛ mprɛte?

PMMA hann akwankyerɛ mprɛte yɛ optical acrylic panel a egye hann fi LED ahorow a wɔde asi ano biako anaa nea ɛboro saa so na ɛkyekyɛ saa hann no wɔ beae kɛse a hann wɔ so denam laser nsensanee, nsensanee a wɔakyerɛw anaa nneɛma afoforo a wɔde yiyi mu so.

Ɔkwan bɛn so na laser-dot LGP brɛ nsensanee a ɛyɛ tumm ase?

Wɔsesa laser nsensanee no density ne spacing wɔ panel no nyinaa so de yi hann pii anaa kakraa bi wɔ mmeae ahorow. Nhwɛso a wɔayɛ no yiye no tua kwan a ɛsakra fi LED fibea no ntam no so ka na ɛma hann kyekyɛ tu mpɔn.

Nsonsonoe bɛn na ɛda LGP ​​ne diffuser krataa ntam?

LGP no de hann kɔ LED ahorow a wɔde ahyɛ anoano no mu na ɛyi. Wɔtaa de diffuser krataa si LGP no anim na ama hann a ɛba no ayɛ mmerɛw, atew nsensanee a wotumi hu so na ama sɛnea wɔhwɛ no awiei koraa no atu mpɔn.

So PMMA hann akwankyerɛ mprɛte hia reflector?

Nneɛma a wɔde kanea a ɛwɔ afã biako dodow no ara de akyi afiri a ɛma hann no dannan kɔ fam kɔ ​​baabi a wɔhwɛ no na ɛtew aniwa a ɛyera so. Ɛsɛ sɛ wɔsɔ reflector ne diffuser nhyehyɛe a etwa to no hwɛ sɛ nhyiam a edi mũ no fã.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Wallis de PMMA hann akwankyerɛ mprɛte a ne kɛse fi mm 3 kosi mm 12 ma. Thickness a wɔkamfo kyerɛ no gyina panel no nsusuwii, LED package, hann akwantu kwan, structural design ne installation space a ɛwɔ hɔ so.

So Wallis betumi ayɛ laser dot density no sɛnea ɔpɛ?

Aane. Wobetumi ayɛ dot density sɛnea panel kɛse a wɔawie, PMMA thickness, LED gyinabea, LED pitch, input anoano dodow, emission akwankyerɛ ne target hann beae.

So wobetumi CNC atwitwa LGP ​​no, atutu anaasɛ wɔayɛ no fɛfɛɛfɛ?

Aane. Wallis betumi ama CNC twa, ntokuru, slots, notches, edge polishing ne fabrication afoforo sɛnea adetɔfo mfonini ne project ahwehwɛde te.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

Dodow a ɛba fam koraa a wɔkra no yɛ ade biako, na ɛma ɛyɛ yiye sɛ wɔbɛkra prototype ama fit, optical ne assembly testing ansa na wɔayɛ mass production.

Dɛn ne bere a wɔtaa de yɛ nneɛma no?

Wɔtaa siesie nhwɛsode ahorow wɔ bɛyɛ adwuma nnafua 3–7 mu wɔ sikatua ne mfiridwuma mu adansedi akyi. Mass production taa gye bɛyɛ adapɛn 2–5, a egyina order dodow, processing complexity ne production nhyehyɛe a wɔasi so dua so.

Fael ahorow bɛn na ɛsɛ sɛ mede mena ma wɔde custom quotation ma?

Yɛsrɛ sɛ fa PDF, DWG anaa DXF mfonini a ɛka bom ne ne kɛse, dodow, LED nhyehyɛe, hann-input anoano, emission akwankyerɛ, reflector ne diffuser nsɛm, anoano ayaresa ne packaging ahwehwɛde ahorow mena.