|
Wallis naa PVC Overlay film film si me kɔ na ID, RFID kple hamevinyenye ƒe agbalẽviwo. Tia grade siwo wofa, esiwo wofa sesĩe alo esiwo womefa o, titrime siwo wowɔ ɖe ɖoɖo nu, agbalẽ ƒe lolome kple OEM agbɔsɔsɔme si woatsɔ ana.
WLS- PVC Overlay film
WALLIS
| Amadede: | |
|---|---|
| Titrime : | |
| Nusi wotsɔ blae: | |
| Agbɔsɔsɔ: | |
Wallis PVC Overlay film film nye ametakpɔnu kple kadodo ƒe ƒuƒoƒo si me kɔ si wowɔ na plastic card wɔwɔ bibiwo. Wotsɔa lãgbalẽgolo siwo wota la ƒoa xlãe be wòana eƒe gowo me nakɔ nyuie wu, wòate ŋu aƒoe ɖe enu, wòakpɔ tsi ta, eƒe kadodo ƒe ŋusẽ, eye wòana kaɖi si wowu enu la nanɔ anyi eteƒe nadidi.
Woate ŋu ana nuawo abe nusi wofa PVC Overlay film , nusi wofa sesĩe Overlay film , nusi womefa o Overlay film , si woate ŋu atsɔ laser Overlay film , kple magnetic stripe Overlay film , woate ŋu ana nuawo le titrime siwo sɔ alo esiwo wowɔ ɖe ɖoɖo nu, agbalẽwo ƒe lolome, anyigba ƒe nuwuwu, kple nusiwo wotsɔ blae ƒe dzesiwo na ID-gbalẽviwo, gadzraɖoƒegbalẽviwo, . RFID kaɖiwo, mɔɖeɖegbalẽviwo, hamevinyenye ƒe agbalẽviwo, nuteƒewɔwɔ ƒe agbalẽviwo, nunana gbalẽviwo, kple kaɖi ƒe nu bubu siwo wotsɔ laminated.
| Adzɔnu Ƒomevi | PVC Overlay film film / PVC kaɖi Overlay film agbalẽ / kaɖi lamination Overlay film |
| Nu | Nusi me kɔ PVC |
| Eƒe titrime | 0.04mm-0.15mm ƒe didime; 0.05mm, 0.08mm kple 0.10mm nye tiatia siwo bɔ; titrime si wowɔ ɖe ɖoɖo nu li |
| Lolome | A4, A3 kple agbalẽ ƒe didime siwo wowɔ ɖe ɖoɖo nu |
| Dzesi Siwo Li | Wotsyɔ nu Overlay film , wofa nu sesẽ Overlay film , womefae o Overlay film , laserable Overlay film kple magnetic stripe Overlay film |
| Tiatia Siwo Le Anyigba Dzi | Glossy, matte, transparent kple customized anyigba dzi atikewɔwɔ |
| Agbalẽtata ƒe Ðekawɔwɔ | Nutsyɔtsyɔ ƒe tiatia siwo sɔ na offset, seda-screen, UV kple oxidative ink ɖoɖowo; wokafui be woado ewɔwɔ kpɔ |
| Magnetic Stripe ƒe Tiatiawɔblɔɖe | HiCo / LoCo ƒe dɔwɔƒe; 300 Oe, 600 Oe, 2750 Oe kple 3000 Oe tiatia le dɔa ƒe nudidiwo nu |
| Dɔwɔwɔ Veviwo | ID gbalẽviwo, gadzraɖoƒegbalẽviwo, RFID gbalẽviwo, mɔɖeɖegbalẽviwo, hamevinyenye ƒe agbalẽviwo, nuteƒewɔwɔ gbalẽviwo, nunana gbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo kple smart cardwo |
| Trɔ asi le eŋu | Titrime, lolome, nutsyɔnu ƒe ŋusẽ, anyigba ƒe nuwuwu, magnetic stripe ƒe nɔnɔme, nubabla kple dzeside |
Selecting the coating grade is a bonding decision , menye tiatia le dzedzeme si le keklẽm alo matte ŋu ko o. Nu vevi si wota, nuŋlɔtsi ƒe atikewɔwɔ, dzoxɔxɔ-tamɔ̃ ƒe tsatsam kple lãgbalẽ ƒe ŋusẽ si hiã lae afia Overlay film si sɔ.
| Overlay film Dzeside | Best-Fit Card Production | Dzeside Vevitɔ |
|---|---|---|
| Wofae ɖe ɖoɖo nu PVC Overlay film | ID gbadzaa, mɔɖeɖe, nunana kple hamevinyenye ƒe agbalẽvi siwo zãa PVC nu vevi siwo wota siwo sɔ | Kpɔ kpe coating orientation, ink curre, peel ŋusẽ kple eme kɔ le lamination megbe. |
| Wofa nu sesĩe PVC Overlay film | Kpekpeɖeŋugbalẽvi ƒe xɔtuɖoɖo siwo me nusiwo wotsɔ blaa nu ɖe ɖoɖo nu mete ŋu naa kadodo ƒe vovototo si sɔ o | Da asi ɖe ink/adhesive ƒe ƒuƒoƒo si sɔ pɛpɛpɛ dzi; ɖo kpe peel ƒe ŋusẽ, bubbles kple tsitsi ƒe dɔwɔwɔ dzi. |
| Wometsyɔ nu edzi o PVC Overlay film | PVC xɔtuɖoɖo siwo te ŋu wɔa dzoxɔxɔ ƒe kadodo si ŋu kakaɖedzi le evɔ wometsɔa nusi léna ɖe nu ŋu o | Fia fusion na nu vevi siwo wota kple esiwo wometa o siaa; lé ŋku ɖe nugbɔ ƒe mama ŋu le lãɖeɖe vɔ megbe. |
| Magnet ƒe fli Overlay film | Kpekpeɖeŋugbalẽvi siwo hiã be woawɔ magnet-nuléƒe si wotsɔ ƒo ƒui | Tsɔ HiCo/LoCo ƒe dzeside, fli ƒe nɔƒe, encoder, nuxlẽla kple kadodo ƒe ŋusẽ gblɔ. |
| Laser-ŋuɖoɖo ƒe dzesi tɔxɛ | Dɔ siwo bia be wodo laser ame ŋutɔ ƒe nɔnɔme le nu blibo si sɔ ƒe ƒuƒoƒo me | Ðo kpe laser-ŋuɖoɖo ƒe atikeŋutinunya kple kaɖi ƒe xɔtuɖaŋu si sɔ pɛpɛpɛ dzi; a general PVC Overlay film menye nusi woate ŋu awɔ le eɖokui si laser o. |
PVC Overlay film film nye ƒuƒoƒo tsɛ aɖe si me kɔ si woda ɖe PVC kaɖi ƒe nuto si wota la tame kple ete le hot-press lamination me. Ne wotsɔ dzoxɔxɔ kple nyaƒoɖeamenu si dzi wokpɔna de eme vɔ la, Overlay film la blana kple kaɖia ƒe ŋutilã eye wòwɔa ametakpɔnu si me kɔ ɖe nɔnɔmetata siwo wota, nuŋɔŋlɔwo, fliwo, dedienɔnɔdzesiwo, antennawo, chips, alo magnet-kaɖi ƒe xɔtunuwo dzi.
Le kaɖiwɔlawo gome la, Overlay film ƒe dzesi si sɔ kpena ɖe ame ŋu be woaɖe lãgbalẽ, kuɖɔ, aŋɔ, anyigba ƒe ʋuʋu, amadede ƒe tɔtɔ, kple eƒe ʋuʋu dzi akpɔtɔ. Ele be nusiwo woatsɔ atsyɔ nu dzi tiatia nasɔ kple kaɖia ƒe nuto, nuŋlɔtsi ƒe ɖoɖo, lamination dɔwɔnuwo, ŋusẽ si hiã le lãgbalẽa me, kple kaɖi si wowu enu ƒe dɔwɔwɔ ƒe dzidzenu.
Nusiwo woate ŋu atrɔ asi le PVC Overlay film Film
Nɔnɔmetata Siwo Me Kɔkɔ Kple Amadedewo ƒe Nukpɔkpɔ
Lamination ƒe Dɔwɔwɔ si Li ke
PVC Overlay film si wofa la lɔ nulénu si wowɔ be wòana kadodo nanyo ɖe edzi le nuŋlɔtsi si wota kple Overlay film si me kɔ dome. Esɔ na kaɖidɔ siwo hiã be woalé wo ɖe wo nɔewo ŋu kakaɖedzitɔe, woƒe dzedzeme me kɔ, eye woatsɔ hot-press lamination awɔ dɔ nyuie.
Wotiaa Overlay film si wofa sesĩe ne ink system alo card wɔwɔ bia be woawɔ kadodo ƒe dɔwɔwɔ si de ŋgɔ wu. Akpa ɖeka naa nusi wowu enu la nɔa gbadzaa, gake wotrɔ asi le axa si wofa nu ŋu be wòabla ɖe kaɖi si wota ƒe nugbɔ ŋu. Dzeside sia ɖea vi ŋutɔ na kaɖi ƒe wɔwɔme siwo bia nu geɖe, magnet-ka ƒe dɔwɔwɔ, kple dɔwɔwɔ siwo me tsitretsitsi ɖe lãɖeɖe ŋu le vevie ŋutɔ.
Wozãa Overlay film si womefa o ne kaɖi ƒe nuto, ink, alo ewɔwɔ ƒe ɖoɖo na kadodo ƒe dɔwɔwɔ si sɔ xoxo. Ele be nuƒlelawo nado lamination ƒe ŋusẽ, eƒe gaglãgbe, eƒe gbadzaƒe, kple tsitsi ƒe dɔwɔwɔ kpɔ hafi aɖo kpe ewɔwɔ le agbɔsɔsɔ gã me dzi.
Specialized laser-responsive Overlay film nye nusiwo ƒe dzeside si to vovo na kaɖi ƒe wɔwɔme tiatia; plain transparent PVC Overlay film mesɔ le eɖokui si na laser nuŋɔŋlɔ o. Ðo kpe dzeside si wona dzi eye nàwu kaɖia tutu nu. Woateŋu atsɔ magnet stripe Overlay film ana kple HiCo alo LoCo stripe tiatia na gadzraɖoƒegbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo, mɔɖeɖegbalẽviwo, hamevinyenye ƒe kaɖiwo, kple kaɖi ƒe dɔwɔɖoɖo bubu siwo woŋlɔ ɖe kɔpi me.
Overlay film ƒe titrime kpɔa ŋusẽ ɖe kaɖia ƒe ametakpɔnu, ƒuƒoƒo bliboa ƒe ƒuƒoƒo kple lamination ƒe nuwɔna dzi. Zi geɖe la, wotsɔa sinima la dana ɖe PVC kaɖi ƒe nuto si wota ƒe ŋgɔgbe kple megbe ; bu akɔnta le akpa eveawo ŋu tsɔ wu be nàtia ŋgɔgbe Overlay film ɖeɖeko.
| Nominal Overlay film Titrime | Common Tiatia Logic | Safui Dzodzro |
|---|---|---|
| 0.05mm / 50 μm ƒe didime | Ametakpɔnu tsɛ siwo me wotsɔa titrime geɖe ɖoa kaɖi ƒe ƒuƒoƒo ememetɔwo ŋu le | Film ƒe dɔwɔwɔ, nutsyɔnu ƒe ɖekawɔwɔ, nutoa me ƒe chips kple anyigba ƒe nuwuwu. |
| 0.08mm / 80 μm ƒe didime | Anyigba ƒe takpɔkpɔ si da sɔ kple kaɖi ƒe titrime bliboa na PVC ƒe nɔnɔmetata geɖe siwo wota | Ŋgɔgbe/megbe symmetry, peeling, eme kɔ kple post-lamination didimewo. |
| 0.10mm / 100 μm ƒe didime | Ametakpɔnu si le kpekpem wu ne kaɖi ƒe ƒuƒoƒo bliboa ɖe mɔ nɛ | Lamination tsatsam, bonding, curling kple ɖekawɔwɔ kple card-personalization dɔwɔnuwo. |
| 0.04–0.15mm / Dekɔnu | Dɔa koŋ takpɔkpɔ, kaɖiwo tutu kple ewɔwɔ ƒe dɔwɔnuwo | Kpe gauge ŋutɔŋutɔ si woɖo ɖe ɖoɖo nu, mɔɖeɖe ɖe nu ŋu, agbalẽvi ƒe nɔnɔme kple dodokpɔ ƒe dzidzenuwo dzi. |
si nye kpɔɖeŋu, si wometsɔ lãgbalẽ wɔe o Akɔntabubu ƒe ƒuƒoƒo enye 0.08mm ŋgɔgbe Overlay film + 0.30mm ƒe nuto si wota + 0.30mm ƒe nuto si wota + 0.08mm megbe Overlay film = 0.76mm . Esia nye ɖoɖowɔwɔ ɖe titrime ŋu ƒe kpɔɖeŋu, ke menye xexeame katã ƒe nuwɔwɔ ƒe nuɖaɖa o. Kaɖi ƒe titrime ŋutɔŋutɔ trɔna ne dzoxɔxɔ, nyaƒoɖeamenu, nusi wotsɔ blae ƒe sisi, RFID inlays kple nutoa me chip structures; dzidzea kpɔɖeŋu siwo wowɔ vɔ ɣesiaɣi.
Ŋlɔ film ƒe titrime le ŋkɔ me, mɔɖeɖe ɖe nu ŋu si wodzidze, kaɖi ƒe titrime si wowu enu le teƒe geɖe, chip-zone ƒe tɔtrɔ, bow, curl kple ID-1 kaɖi alo dɔwɔnu ƒe nudidi siwo sɔ. Ele be woadzra agbalẽvi ƒe dzeside aɖe koŋ ɖe nɔnɔmetata kple kpɔɖeŋu si dzi woda asi ɖo la nu ko.
Wotsɔa PVC aŋɔ tsakana kple nusiwo wotsɔ kpe ɖe eŋu kple nusiwo naa nu nɔa te nyuie, emegbe wotrɔa asi le eŋu wòzua film tsɛ si me kɔ to ɣletigbalẽ alo eɖeɖe ɖe go si dzi wokpɔna me. Le kaɖia zazã si hiã nu la, woate ŋu awɔ dɔ le film la ƒe gota, atsɔ nulénu atsyɔ edzi, woate ŋu atsɔ laser awɔe, atsɔe akpe ɖe magnet-kaɖi ƒe nu ŋu, eye woatsoe wòazu agbalẽwo alo woatrɔ asi le eŋu wòadidi.
Le agbɔsɔsɔ gã wɔwɔ si li ke gome la, ele be woada Overlay film la akpɔ be ete ŋu nɔa te ɖe eƒe titrime dzi, eƒe anyigba ƒe dzadzɛnyenye, eƒe nukpɔkpɔ le gaglãgbe, eƒe nutsyɔnu ƒe ɖekawɔwɔ, eƒe didime ƒe liƒo, kadodo ƒe dɔwɔwɔ, kple eƒe ɖekawɔwɔ kple nuƒlela ƒe agbalẽtata kple lamination ƒe ɖoɖoa.
Multi-Layer Card Xɔtutu
RFID Kpekpeɖeŋugbalẽvi ƒe Nu vevi kple Overlay film Kpekpe
Dɔwɔwɔ si woate ŋu agbugbɔ awɔ le vevie elabena Overlay film si léna ɖe nu ŋu ŋutɔ gɔ̃ hã ate ŋu agbã ne akpa si mesɔ o dze ŋgɔ nuto la alo nuŋlɔtsi si wota la mehaya keŋkeŋ o.
| Production Stage | Dɔwɔwɔ ƒe Dzodzro si Wokafu |
|---|---|
| 1. Kpɔ nu kple nusi wotsɔ blae ƒe akpa dzi | De dzesi anyigba siwo dzi wofa nu ɖo kple esiwo womefa o, ametakpɔnu siwo wotsɔ blaa nu (ne woli), agbalẽa ƒe mɔfiame kple lot ƒe xexlẽdzesi. |
| 2. Dzra PVC ƒe nu vevi siwo wota ɖo | Kpɔ kpe ink ƒe dɔyɔyɔ, solvent ɖeɖeɖa, print-registration marks, flatness, anyigba ƒe dzadzɛnyenye kple core ƒe titrime dzi. |
| 3. Ƒo kaɖia ƒe ƒuƒoƒoa nu ƒu | Tsɔ ŋgɔgbe Overlay film , nu vevitɔ si wota, RFID inlay, megbe nuto kple Overlay film ɖo ɖoɖo nu le ɖoɖo si dzi woda asi ɖo nu. |
| 4. Wɔ dzoxɔxɔ ƒe lamination | Zã nyadzɔdzɔgbalẽ ƒe dzoxɔxɔ, nyaƒoɖeamenu, nɔƒe, asiɖeɖe le nu ŋu ƒe agbalẽviwo kple dzoxɔxɔ ƒe nɔnɔmetata si ŋu woda asi ɖo na xɔtuɖoɖo ma koŋ. |
| 5. Fafa kple nɔnɔme | Lé fafa si dzi wokpɔna me ɖe asi be nàɖe ememe nuteɖeamedzi, ƒoƒo kple laminated layers ƒe mama kaba dzi akpɔtɔ. |
| 6. Punch eye nàtrɔ asi le eŋu wòasɔ na wò ŋutɔ | Dzidze kaɖia ƒe titrime kple eƒe didime; lé ŋku ɖe goawo, anyigba kple encoding/tata ƒe dɔwɔwɔ ŋu. |
| 7. Da asi ɖe nuwɔwɔ ƒe emetsonu dzi | Du peel, visual, flatness kple functional checks ɖe kpɔɖeŋu kple nuƒle ƒe nɔnɔme si wode asi ete la nu. |
Dzoxɔxɔ kple fafa ƒe tsatsam siwo hiã la nɔ te ɖe resin ƒe grade, nusi wotsɔ blae, ink film ƒe titrime, press design kple stack ƒe kɔkɔme dzi. Zã dodokpɔ si woŋlɔ ɖi le dɔwɔnu siwo wotsɔ wɔa nuawo ŋu; mègazã nudzrala bubu ƒe dzoxɔxɔ tẽ abe ɖoɖo si ŋu kakaɖedzi le ene o.
Akpa si wofa la doa adhesion ɖe ŋgɔ le kaɖi ƒe nuto si wota kple Overlay film ƒe ƒuƒoƒo dome, si kpena ɖe ame ŋu be woaɖe nu kɔkɔ, nugbɔ ƒe mama, kuɖɔwo, kple delamination dzi akpɔtɔ ne nusi wotsɔ blae ƒe grade kple lamination parameters sɔ nyuie.
Overlay film si me kɔ ŋutɔ la kpɔa nɔnɔmetata siwo wota ta esime wòle amadede ƒe dzedzeme, nuŋɔŋlɔ nyuiwo xexlẽ, barcode ƒe eme kɔ, kple anyigba si le keklẽm alo matte si wowu enu la me ɖe asi.
Overlay film la wɔa kaɖia ƒe gotagome ametakpɔnu, si kpena ɖe nyatakaka siwo wota ŋu be woatsi tre ɖe eŋudɔwɔwɔ edziedzi, ʋuʋudedi, ʋuʋudedi, tsidzadza, ɖiƒoƒo, kple subɔsubɔ ƒe awudodo si sɔ ŋu.
Nuƒlelawo ate ŋu agblɔ eƒe titrime, agbalẽa ƒe lolome, eƒe nuwuwu, eƒe nutsyɔtsyɔ ƒe ŋusẽ, magnet-ka ƒomevi si wotsɔ blae, mɔnu si dzi woblae, kple dzesideŋkɔ le agbalẽvi ƒe nɔnɔme, agbalẽtata ƒe mɔnu, laminator, lãɖeɖe ƒe ɖoɖo, kple nudɔdɔ ƒe agbɔsɔsɔme nu.
Gɔmedzedze Kɔkɔe kple Gloss
Ametakpɔkpɔ si nɔa anyi didina le Multi-Layer
Wallis naa tiatia siwo woatsɔ atsyɔ kaɖi ƒe nu vevi siwo wota kple offset, silk-screen, UV , kple oxidative ink systems. Esi wònye be ink ƒe atikewɔwɔ, eƒe ƒuƒu ƒe nɔnɔme, agbalẽtata ƒe nutsyɔtsyɔ, nu veviwo, lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu, kple ɣeyiɣi si wotsɔ ƒoa xlãe ate ŋu akpɔ ŋusẽ ɖe kadodo dzi ta la, ele be woada asi ɖe ewɔwɔ ƒe kpɔɖeŋu dzi hafi adɔ nu geɖe.
Kpɔe ɖa be akpa si wota la hiã be woatsyɔ nu zi geɖe alo woatsyɔ nu sesĩe.
Kpɔe ɖa be nusiwo me kɔ, afu, anyigba ƒe keklẽ, kple amadede ƒe gbugbɔgadzɔ le lamination megbe hã.
Do aŋɔ ƒe ŋusẽ, nugbɔ ƒe kadodo, kuɖɔ, ʋuʋudedi, kple tsitsi ƒe dɔwɔwɔ kpɔ.
Tsɔ Overlay film ƒe titrime sɔ kple taɖodzinua ƒe finished-card ƒe titrime kple layer ƒe wɔwɔme.
Ðo kpe magnet-ka ƒe nɔnɔme, dzizizi, kekeme, kple kadodo ƒe nudidiwo dzi ne esɔ.
Esiawo nye dɔlélewo didi ƒe gɔmedzedze na kaɖidɔwɔƒewo. Ele be woatsɔ kpɔɖeŋu siwo dzi wokpɔ ŋusẽ ɖo aɖo kpe ɖɔɖɔɖo mamlɛtɔ dzi tsɔ wu be woatrɔ lamination parameter geɖewo zi ɖeka.
| Gblẽƒe si Wode dzesii | Anɔ eme be Nusiwo Gbɔ Wòle | Be Woalé ŋku ɖe eŋu Gbã |
|---|---|---|
| Edge peeling alo delamination | Kadodo si mesɔ o, nutsyɔnu alo nuŋlɔtsi si mewɔ ɖeka o, dzoxɔxɔ alo nyaƒoɖeamenu si mesɔ o | Kpɔe ɖa be coating side, ink curre kple dzidze peel ŋusẽ le conditioning megbe. |
| Bubbles alo klosalowɔwɔ | Ya alo tsi si xe mɔ na, aŋenu ƒe sisi si mesɔ o alo nuto si me ɖi le | Kpɔ ƒuƒuiƒe, agbalẽwo ƒe dzadzɛnyenye, stack dzadzraɖo kple dzoxɔxɔ ƒe nɔnɔmetata. |
| Alilikpo ƒe dzedzeme / afu | Film ƒe dzesi ƒe masɔmasɔ, ɖiƒoƒo le anyigba dzi alo eŋudɔwɔwɔ wògbɔ eme | Tsɔ ɖetugbui leaƒe film sɔ kple laminated sample; lé ŋku ɖe afisiwo wodoa go le kple dzoxɔxɔ ŋutɔŋutɔ ŋu. |
| Kpekpeɖeŋugbalẽvi ƒe akɔtaɖonu alo curl | Ŋgɔgbe/megbedzidzenu si meda sɔ o, dzoxɔxɔ si mesɔ o alo fafa si dzi womeɖu o | To stack symmetry, plate flatness kple fafa ƒe nyaƒoɖeamenu me. |
| Scratches / agbalẽvi ƒe dzesiwo | Press plate ƒoɖiwo, abrasive handling alo release sheets siwo mesɔ o | Dzro agbalẽviwo, wo ŋu kɔklɔ, wo tsɔtsɔ de wo nɔewo me kple wo bablawo me. |
| Amadede ƒe tɔtrɔ alo agbalẽtata ƒe gbegblẽ si wokpɔna | Ink si meda gbe le bliboe o, dzoxɔxɔ ƒe nuteɖeamedzi alo coating–ink ƒe kadodo | Do ink siwo wota kpɔ kple dzesi bubuwo kple atikewɔwɔ/lamination ƒe tsatsam siwo ŋu wotrɔ asi le. |
| Magnetic stripe encoding do kpo nu | Zidzizizi si mesɔ o, fli ƒe nɔƒe si mesɔ o alo nusiwo gblẽ le dɔwɔwɔ me | Kpɔ fli ƒe nɔnɔme si sɔ pɛpɛpɛ, laminator ƒe ɖoɖowɔwɔ kple encoder/xlẽla ƒe emetsonuwo ɖa. |
PVC Overlay film kpɔa dɔwɔlawo ƒe ID gbalẽviwo, sukuviwo ƒe dzesidegbalẽviwo, mɔɖeɖe ƒe agbalẽviwo, amedzrowo ƒe kaɖiwo, kple dziɖuɖu alo dɔwɔƒe ƒe agbalẽvi siwo hiã be woawɔ ame ŋutɔ ƒe nɔnɔme si me kɔ eye woanɔ anyi eteƒe nadidi si dzi woate ŋu aka ɖo la ta.
Coated kple magnetic stripe Overlay film tiatia doa alɔ kaɖi ƒe wɔwɔme siwo hiã anyigba dzi takpɔkpɔ kpe ɖe HiCo alo LoCo magnetic data dɔwɔwɔ ŋu.
PVC Overlay film ateŋu anye laminated ɖe RFID alo NFC inlay structures dzi be woakpɔ agbalẽtata ta eye wòakpe ɖe eŋu woawɔ smart card si wowu enu si li ke hena mɔɖeɖe, dzesidede, ʋuɖoɖo, nuteƒewɔwɔ, kple nunɔamesiwo dzikpɔkpɔ ƒe ɖoɖowo.
Clear glossy alo matte Overlay film naa asitsagbalẽvi siwo nudzralawo, amedzrodzeƒewo, habɔbɔwo, modzakaɖeƒewo, sukuwo, lãmesẽdɔwɔlawo, kple dɔwɔƒe siwo kpɔa dɔwɔƒewo zãna ƒe ɖeɖefia kple woƒe dɔwɔwɔ ƒe agbenɔƒe nyona ɖe edzi.
Kpekpeɖeŋugbalẽvi Siwo Wota
ID kple Mɔɖeɖe ƒe Kpekpeɖeŋugbalẽviwo
Anyigba ƒe Takpɔkpɔ si Me Kɔ
PVC , PETG kple polycarbonate ( PC ) Overlay film filmwo le kaɖi-nu ƒe ɖoɖo vovovowo me. Mele be woatsɔ wo aɖɔli le esi agbalẽwo ƒe titrime alo woƒe keklẽ sɔ ta ko o.
| Nusiwo | Wozãna Typical | Tiatia Afɔku |
|---|---|---|
| PVC Overlay film | Taɖodzinu gbadzaa PVC ID, nuteƒewɔwɔ, mɔɖeɖe kple nunana gbalẽvi tutu | Match PVC core, print ink, nutsyɔnu kple dzoxɔxɔ ƒe kadodo ƒe ɖoɖo. |
| PETG Overlay film | PETG kple kaɖi ƒe wɔwɔme siwo wowɔ ɖekae tiatia | Do interlayer adhesion, dzoxɔxɔ ƒe ŋuɖoɖo, kaɖi ƒe gbadzaƒe kple agbalẽtata ƒe ɖekawɔwɔ kpɔ. |
| Polycarbonate Overlay film | PC ɖaseɖigbalẽ siwo ƒe ƒuƒoƒo geɖe nɔa anyi didina wu, siwo dometɔ aɖewoe nye xɔtuɖoɖo siwo sɔ siwo wowɔ na laser | Kpɔ PC -to- PC ƒe kadodo ɖa eye nàzã laser-responsive grade si woɖo ɖi ne ehiã be nàŋlɔ nu. |
Ðe kaɖia ƒe wɔwɔme gɔme: Ðo kpe nu vevitɔ, nusi wota, nusi wotsɔ de eme, chip, magnetic stripe, kple taɖodzinu si wowu enu ƒe titrime dzi.
De dzesi agbalẽtata ƒe mɔnu: Ma nuŋlɔtsi ƒomevi, agbalẽtamɔ̃, mɔnu si dzi woatae, kple agbalẽtata ƒe nutsyɔnu ale be woate ŋu asɔ kple nusi wotsɔ blae.
Kpe ɖe lamination ƒe ɖoɖoa dzi: Na laminator ƒe ƒomevi, dzoxɔxɔ ƒe didime, nyaƒoɖeamenu, cycle time, kple fafa mɔnu.
Gblɔ dɔwɔwɔ ƒe nudidiwo: De nudidi siwo ku ɖe nusiwo me kɔ, keklẽ, eƒe lãgbalẽ ƒe ŋusẽ, alesi wòate ŋu aƒoe, eƒe gbadzaƒe, tsitsi, kple dedienɔnɔ ƒe nudidiwo eme.
Da asi ɖe kpɔɖeŋuwo dzi: Do agbalẽtata, lamination, lãɖeɖe, ame ŋutɔ ƒe tɔtrɔ, kple kaɖi ƒe dɔwɔwɔ mamlɛtɔ kpɔ hafi nàwɔe le agbɔsɔsɔ gã me.
Ne èdi be yeagblɔ nya si sɔ la, ɖo wò nusi nèdi, eƒe titrime, agbalẽa ƒe lolome, nusi wotsɔ blae ƒe ƒomevi, eƒe akpa si wowu enu, agbalẽtata ƒe mɔnu, eŋudɔwɔwɔ, ƒe sia ƒe ƒe lolome, kple kpɔɖeŋu dodokpɔ ƒe nudidiwo ɖe Wallis.
Le sedede siwo wotsɔ ɖoa duta gome la, nufiame ƒe kpɔɖeŋu si dzi woda asi ɖo kple nɔnɔmetata siwo woŋlɔ ɖi la ɖea vi wu nya si wogblɔna le mɔ gbadza nu be Overlay film sɔ ɖe nuwɔwɔ ƒe mɔnu ɖesiaɖe nu. Ele be nuƒlela kple nudzrala nalɔ̃ ɖe nya siwo gbɔna dzi hafi woawɔ agbɔsɔsɔme si woatsɔ awɔe.
| Nuƒlela ƒe Nudidi Ŋuti | Nyatakaka Siwo Woatsɔ Aɖo Kpe Ðe Eŋu |
|---|---|
| Overlay film ƒe nɔnɔmetata | PVC resin/grade, coated/strong-coated/non-coated, ŋkɔdzidzenu, titrime mɔɖeɖe, gloss/matte nuwuwu. |
| Agbalẽvi kple ɖoɖo si wowɔ | A4, A3 alo didime pɛpɛpɛ × kekeme, mɔfiame, lãɖeɖe ƒe mɔɖeɖe, agbalẽwo ɖe ƒuƒoƒo ɖesiaɖe kple kakɛ ɖeka dzi. |
| Agbalẽtata kple kaɖiwo ƒe ƒuƒoƒo | PVC nu vevi ƒe kpɔɖeŋu, nuŋlɔtsi ƒomevi, dɔyɔyɔ ƒe nɔnɔmewo, kaɖi ƒe ƒuƒoƒo, RFID inlay alo magnetic stripe ƒe akpawo. |
| Lamination dɔwɔnuwo | Mɔ̃ ƒomevi, dzoxɔxɔ kple fafa profile, nyaƒoɖeamenu, nɔƒe, agbawo kple asiɖeɖe le film. |
| Nukpɔkpɔ kple nukpɔkpɔ ƒe ŋkuléle ɖe nu ŋu | Transparency/haze, surface scratch, black spots, wrinkles, nugbɔ ƒe nɔnɔme kple amadede ƒe ŋusẽkpɔɖeamedzi si dzi woda asi ɖo. |
| Bonding kple finished-card dodokpɔwo | Woɖe peel mɔnu kple seɖoƒe, bubble kple warpage lɔlɔ̃ ɖe edzi, nuwuwu gauge, bending / abrasion ne ehiã. |
| Magnetic stripe ƒe tiatia | HiCo/LoCo ƒe amedzizizi, fli ƒe kekeme kple teƒe ƒe nɔnɔmetata, encoder kple reader dodokpɔ me tsonu. |
| Ðoɖowɔwɔ ɖe ɖoɖo nu kple alesi woate ŋu akplɔe ɖo | Kpɔɖeŋu agbɔsɔsɔme, MOQ, agbɔsɔsɔme si wobu, lot marking, packing plan kple sedziwɔwɔ ŋuti nuŋlɔɖi siwo hiã. |
Ele be woatsɔ kaɖi ƒe nu vevi siwo wota kple ewɔwɔ ƒe tsatsam si woɖo be woatsɔ awɔ laminated Overlay film kpɔɖeŋu aɖe. Da asi ɖe dzedzeme, kadodo, atamkaka, kaɖi si wowu enu ƒe didime kple magnet alo kadodomanɔmee ƒe dɔwɔwɔ ɖesiaɖe dzi hafi nàɖo kpe nudɔdɔ gbugbɔgawɔ ƒe nɔnɔme aɖe dzi.
PVC Overlay film woblaa agbalẽwo be woaɖe ke, tsidzadza, nugbɔ ƒe gbegblẽ, kple ʋuʋu dzi akpɔtɔ le dukɔwo dome ʋuɖoɖo me. Standard export packing ate ŋu anye ametakpɔnu PE film, tsi-tsi-tsitretsitsi kraft nu, kakɛ alo pallets, dzogoe takpɔkpɔ, keke babla, kple customized labels.
Nusiwo Wodzrana Ðe Duta ƒe Nubablɛ Siwo Wokpɔ Ta Na
Palletized Xexeame Katã ƒe Meliɖoɖo
Wallis doa alɔ kaɖi wɔlawo, agbalẽtadɔwɔƒewo, smart card dɔwɔƒewo, mamalawo, kple OEM dɔwo kple PVC Overlay film egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu, kpɔɖeŋu dodokpɔ, ewɔwɔ ƒe ɖoɖowɔwɔ, nubablɛ siwo wotsɔ ɖoa duta, kple mɔ̃ɖaŋununya ƒe kadodo si wɔa dɔ nyuie.
Nuteƒekpɔkpɔ le ɖoɖowɔwɔ ɖe plastik-gbadzɛ kple kaɖi-nuzazãwo nana na adzɔnuwo wɔwɔ ƒe asisiwo ŋu.
Nuwɔwɔ ƒe ɖoɖowɔwɔ, dzedze ƒe kpekpeɖeŋu kple scalable bulk supply le nudɔdɔ ƒe nudidiwo nu.
Nusiwo wowɔ ɖe ɖoɖo nu ƒe titrime, lolome, nutsyɔtsyɔ, nuwuwu, fli ƒe nɔnɔme, babla, kple dzeside.
Kpɔɖeŋu kpekpeɖeŋu na agbalẽtata, lamination, bonding, kple finished-card evaluation.
Dzɔtsoƒe ƒe kpekpeɖeŋu si tso teƒe ɖeka na PVC , PET , PETG , PC , Overlay film , core sheet, inlay, kple card materials siwo do ƒome kplii.
Wallis ƒe Ƒuƒoƒoa
Xexeame Katã ƒe B2B Asitsalawo
Wallis Dɔwɔƒe
Ðo wò kaɖi ƒe wɔwɔme, nuŋlɔtsi ƒe ɖoɖo, Overlay film ƒe titrime, agbalẽa ƒe lolome, nusi hiã be woatsɔ atsyɔ nu edzi, eŋudɔwɔwɔ, kple nudɔdɔ ƒe agbɔsɔsɔme si wobu. Wallis akpe ɖe ŋuwò nàda nusiwo sɔ kple kpɔɖeŋu dodokpɔ ƒe ɖoɖo la akpɔ.
Te ɖe Wallis Kaadi ƒe nɔnuwo Eŋutinunyala aɖe ŋuPVC Wotsɔa Overlay film film la ƒoa ƒu ɖe plastic card cores siwo wota dzi be woakpɔ nɔnɔmetatawo kple nyatakakawo ta, ana eƒe go ƒe dzedzeme nanyo ɖe edzi, adzi abrasion tsitretsitsi ɖe edzi, eye wòado ŋusẽ kaɖi ƒe wɔwɔme si wowu enu.
Overlay film si wofa la ƒe akpa aɖee nye nusi wotsɔ léa nu ɖe nu ŋu si naa kadodo nyona ɖe edzi kple kaɖi ƒe nuto siwo wota. Overlay film si womefa o la ɖoa ŋu ɖe gɔmeɖoanyinuwo kple lamination ƒe dɔwɔwɔ ƒe sɔsɔ ŋu wu. Wolɔ̃a Overlay film si wofa sesĩe wu ne lãgbalẽ ƒe ŋusẽ si lolo wu alo ink ƒe sɔsɔ sesẽ le eme.
Wallis naa PVC Overlay film tso abe 0.04mm va ɖo 0.15mm, kple tiatia siwo bɔ siwo dometɔ aɖewoe nye 0.05mm, 0.08mm, kple 0.10mm. Woate ŋu aƒo nu tso titrime si wowɔ ɖe ɖoɖo nu ŋu le kaɖia ƒe wɔwɔme kple taɖodzinu si wowu enu ƒe titrime nu.
Ɛ̃. A4 kple A3 ƒe lolome siwo wozãna ɖaa li, eye woate ŋu awɔ agbalẽa ƒe didime, lãɖeɖe ƒe ɖoɖo, nubablɛ, kple dzeside siwo wowɔ ɖe ɖoɖo nu na kaɖi-wɔwɔ ƒe fli vovovowo.
Nutsyɔtsyɔ ƒe tiatia siwo sɔ li na offset, silk-screen, UV , kple oxidative ink ɖoɖo siwo bɔ. Esi wònye be ink ƒe wɔwɔme kple eƒe dɔyɔyɔ ƒe nɔnɔmewo to vovo ta la, ele be nuƒlelawo nado kpɔɖeŋu ŋutɔŋutɔ siwo wota kpɔ hafi aɖo kpe nusi wotsɔ blae ƒe hatsotso kple agbɔsɔsɔme si wobia dzi.
Cross-material lamination ate ŋu adzɔ ne wotsɔ nutsyɔnu nyuitɔ kple alesi wowɔa dɔe, gake alesi wòasɔ ɖe wo nɔewo nu nɔ te ɖe nusi wotsɔ blae, ink, adhesive chemistry, dzoxɔxɔ, nyaƒoɖeamenu, kple kaɖi ƒe wɔwɔme dzi. Ele be woado kpɔɖeŋuwo kpɔ hafi awɔe le agbɔsɔsɔ gã me.
Ɛ̃. Woateŋu atrɔ asi le magnet stripe Overlay film ŋu kple HiCo alo LoCo tiatia, siwo dometɔ aɖewoe nye dzizizi ƒe nɔnɔme vovovowo, fli ƒe nɔƒewo, kekeme, amadedewo, kple kaɖi ƒe dɔwɔwɔ.
Ele be woanɔ te ɖe nuŋlɔtsi si wota, kaɖi ƒe nuto, ŋusẽ si hiã le lãgbalẽa ŋu, magnet-ka ƒe dɔwɔwɔ, kple lamination ƒe nɔnɔmewo dzi tiatia. Zi geɖe la, wobua nutsyɔnu sesẽ ŋu ne nutsyɔnu si wozãna ɖaa mena kadodo ƒe vovototo si sɔ o.
Ɛ̃. Wokafu kpɔɖeŋu dodokpɔ be woatsɔ akpɔe ɖa be agbalẽtata ƒe ɖekawɔwɔ, kadodo, nukpɔkpɔ le gaglãgbe, gbadzaƒe, magnet-ka ƒe dɔwɔwɔ, lãɖeɖe, ame ŋutɔ ƒe nɔnɔme, kple kaɖi si wowu enu ƒe anyinɔnɔ tegbee hafi woawɔe le agbɔsɔsɔ gã me.
Taflatse na nusi wotsɔ wɔe, eƒe titrime, agbalẽa ƒe lolome, nusi wotsɔ blae ƒe ƒomevi, eƒe anyigba ƒe nuwuwu, nuŋlɔtsi kple agbalẽtatamɔnu, kaɖi zazã, magnet-kadodo ƒe hiahiã, agbɔsɔsɔme si wobu, nubablɛ ƒe hiahiã, kple afisi woɖoe be woatsɔe ayi.
Menye nenema kokoko o. Ne ink, core kple lamination process hiã bonding margin bubuwo ko hafi coating si sesẽ wu ɖea vi. Kpɔɖeŋu ƒe lãgbalẽ dodokpɔe kpɔa dzesi si sɔ.
Zã nudzrala la ƒe mɔfiame alo atikewɔwɔ ƒe dzesiwo kple kpɔɖeŋu si dzi woda asi ɖo. Mègasusu be dzedzeme ɖeɖe dzaa dea dzesi mo si wotsɔ aŋe blae la kakaɖedzitɔe o.
Le mɔ̃ɖaŋununya nu la, woate ŋu awɔ asymmetric card stack, gake ate ŋu ana curling nadzi ɖe edzi alo atrɔ eƒe titrime si wowu enu. Da asi ɖe ŋgɔgbe/megbe ƒe dadasɔ dzi le kaɖia ƒe nɔnɔme ŋutɔŋutɔ dzi.
Wotrɔ asi le ID-1 plastik-kaɖi geɖe ŋu ƒo xlã xɔtutu si ƒe lolome nye 0.76mm le ŋkɔ me, gake ele be mɔɖeɖe ɖe nu ŋu ƒe mɔɖeɖe ɖe nu ŋu kple eƒe titrime si wowu enu nawɔ ɖe dɔa kple agbalẽtamɔ̃ ƒe nudidi siwo sɔ dzi.
Nusiwo ate ŋu atsoe dometɔ aɖewoe nye nusi metsɔa nusi wotsɔ blaa nu ɖe nuŋlɔtsi ŋu nyuie o, nuŋlɔtsi ƒe dɔyɔyɔ si mede blibo o, lamination ƒe nɔnɔme siwo mesɔ o alo mɔ̃wo ƒe nuteɖeamedzi. Dzidze eƒe lãgbalẽ ƒe ŋusẽ le agbalẽvi siwo wowɔ vɔ siwo wowɔ ɖe nɔnɔme nyui me dzi.
Ya, tsidzadza, ɖiƒoƒo, nusiwo wotsɔ blaa nu ƒe sisi nyuie alo dzoxɔxɔ ƒe nɔnɔme siwo mesɔ o ate ŋu ana kuɖɔwo nado. Da nuawo ƒe ƒuƒoƒo bliboa kple nyadzɔdzɔŋlɔlawo ƒe nɔnɔmewo kpɔ.
Menye le eɖokui si o. Laser ƒe ŋuɖoɖo nɔ te ɖe nusiwo wotsɔ ɖo adzɔgbee ƒe wɔwɔme kple kaɖi tutu blibo dzi. Ne èdi laser-ame ŋutɔ ƒe ɖaseɖigbalẽ siwo le dedie la, da PC alo etɔxɛ ƒe dzeside ƒe ɖoɖo si sɔ kpɔ.
Woateŋu awɔ cross-material bonding ɣeaɖewoɣi kple nutsyɔnu tɔxɛwo, gake PVC , PETG kple PC ƒe dɔwɔwɔ ƒe fesrewo to vovo. Dze na stack ŋutɔŋutɔ tsɔ wu be nàtsɔe be woatsɔe aɖo eteƒe.
Ekpena ɖe ame ŋu be woakpɔ nɔnɔmetata siwo wota ta tso wo ŋudɔwɔwɔ kple tsidzadza dzro ko me; meka ɖe edzi be tsi mate ŋu age ɖe eme o alo be dedienɔnɔ mate ŋu atrɔ asi le eŋu o. Ahiã be woado nutome kple dedienɔnɔ dodokpɔ le dɔa koŋ ŋu le agbalẽvi bliboa ŋu.
Wotsɔa PVC kaɖi Overlay film na dɔwɔƒewo ƒe dzoxɔxɔ tete dea kaɖi ƒe ƒuƒoƒo si me wotsɔa ƒuƒoƒo geɖe ɖona me, esime wotsɔa laminate si léna ɖe eɖokui ŋu le eɖeɖe vɔ megbe la dea kaɖi si wowɔ xoxo ŋu. Wozãa mɔnu vovovowo eye mele be woaɖɔli wo nɔewo o.
Na woanɔ dzadzɛ, woanɔ gbadzaa, woakpɔ wo ta tso dzoxɔxɔ kple ke me, eye woatre wo nu alo axatsa wo ɖe hatsotso si nètia nu. Nɔnɔme ƒe agbalẽ siwo le nuwɔƒea hafi woazã wo ne nudzraɖoƒe kple dɔwɔƒe ƒe nɔnɔmewo to vovo.
Tsɔ nusiwo wotsɔ wɔe ƒe grade, titrime ƒe mɔɖeɖe ɖe nu ŋu, didime, nukpɔkpɔ ƒe dzedzeme, kadodo dodokpɔ mɔnu, nusiwo gblẽ ƒe seɖoƒe, kpɔɖeŋuɖoɖo, nubabla kple lot traceability; tsɔ ewɔwɔ sɔ kple kpɔɖeŋu siwo dzi woda asi ɖo.
