Views: 0 Author: Site Editor Tata Ɣeyiɣi: 2026-08-06 Dzɔtsoƒe: Teƒe
Transparent BOPET film , si woyɔna hã be biaxially oriented polyethylene terephthalate film alo biaxially oriented polyester film, nye PET film tsɛ aɖe si wowɔ to kekeɖenudɔwɔwɔ me le mɔ̃a ƒe mɔfiame (MD) kple transverse direction (TD) siaa me.
Biaxial orientation sia naa BOPET nye ƒe ƒuƒoƒo vevi aɖe tensile strength, dimensional stability, optical clarity, stiffness, thermal stability kple converting performance . Nɔnɔme siawo na BOPET film si me kɔ si wozãna le afisiafi abe agbalẽtata ƒe web, lamination substrate, packaging layer, label material, elektrik insulation film kple industrial carrier film ene.
Gake le nuƒlela bibiwo gome la, 'BOPET film si me kɔ' ɖeɖeko gbɔgblɔ mesɔ gbɔ o. Ele be film tiatia hã nabu eƒe titrime, kekeme, afu, kekeli ƒe kaka, keklẽ, coefficient of friction, dzoxɔxɔ ƒe shrinkage, MD / TD tensile nɔnɔmewo, anyigba dzi dɔwɔwɔ, corona level, agbalẽtata mɔnu, adhesive ɖoɖo, mɔxenu taɖodzinu kple mamlɛtɔ laminate wɔwɔme.
BOPET tsi tre ɖi na Biaxially Oriented Polyethylene Terephthalate . Wotrɔa PET polymer wòzua film gbã eye emegbe woɖonɛ ɖe mɔ eve nu le ewɔwɔ me.
Mɔ̃ ƒe mɔfiame nye mɔ si dzi sinima la tona toa sinimawɔƒea. Film la keke ɖe mɔ sia nu kpena ɖe PET ƒe molecule ƒe wɔwɔme ŋu wòɖoa mɔ eye wòkpena ɖe tensile kple dimensional dɔwɔwɔ ŋu.
Mɔfiame si le tsia dzi la zɔna to sinima la ƒe kekeme dzi. Orientation le MD kple TD siaa me naa film ƒe wɔwɔme si da sɔ si do ƒome kple BOPET.
Ao, le mɔ̃ɖaŋunyagbɔgblɔ me la, BOPET fia xoxo be PET film la le biaxial oriented. 'Mɔ eve ƒe keke' nye mɔnu si ɖɔa nu si dzi woato aɖe MD kple TD keke ƒe ɖoɖoa me tsɔ wu be woatsɔ polyester film ƒe hatsotso si to vovo.
Biaxial orientation wɔa polyester film sesẽ aɖe si te ŋu léa web ƒe blibonyenye me ɖe asi le agbalẽtata, nutsyɔtsyɔ, slitting, metallizing, lamination kple roll-to-roll dɔwɔwɔ bubuwo me.
Dimension siwo li ke le vevie ŋutɔ na agbalẽtata pɛpɛpɛ, ŋkɔ ŋɔŋlɔ, nutsyɔtsyɔ, elektrikŋusẽ ƒe xɔxlɔ̃ kple multilayer lamination. Dimension ƒe tɔtrɔ fũ ate ŋu ahe flitete, ŋkɔ ŋɔŋlɔ ƒe vodadawo alo laminate ƒe tɔtɔ vɛ.
BOPET si me kɔ ateŋu ana eme nakɔ ŋutɔ eye wòaklẽ na dɔwɔwɔ siwo me wòle be nusi wobla, nɔnɔmetatawo alo nusi le ete la nakpɔtɔ anɔ dzedzem.
Wodea asixɔxɔ polyester film ŋu le eƒe dzoxɔxɔ kple didime ƒe liƒo le agbalẽtata, ƒuƒu, lamination kple tɔtrɔ bubuwo wɔwɔ me ta. Ele kokoko be woalé ŋku ɖe dzoxɔxɔ si ŋu woɖe mɔ ɖo le dɔwɔwɔ ŋu kple eƒe ɖeɖekpɔkpɔ ŋu ne wotsɔe sɔ kple BOPET ƒe dzeside tututu.
Gɔmeɖose vevitɔwo dometɔ ɖekae nye be menye BOPET film ɖesiaɖe si me kɔ la ƒe anyigba alo dɔwɔwɔ ƒe nɔnɔmewo sɔ o.
| BOPET Ƒomevi | Dɔwɔwɔ Vevitɔ | Dɔwɔwɔ Gbãtɔ |
|---|---|---|
| BOPET si me kɔ si me kɔ nyuie | Taɖodzinu gbadzaa si me kɔ polyester substrate | Lamination, tɔtrɔ, dɔwɔƒewo ƒe agbalẽ siwo tsɔa nu |
| BOPET si Wotsɔ Da Koronae | Ŋusẽ si kɔ wu le anyigba dzi na ink, nusiwo wotsɔ blaa nu alo nusiwo wotsɔna léa nu ɖe wo nɔewo ŋu siwo sɔ | Agbalẽtata kple lamination |
| BOPET si wotsɔ atikewo tsyɔ edzi | Doa adhesion ɖe ŋgɔ alo tsɔa dɔwɔwɔ ƒe nɔnɔme siwo le anyigba dzi kpena ɖe eŋu | Agbalẽtata, nutsyɔtsyɔ kple lamination tɔxɛ |
| BOPET si woate ŋu atre dzoxɔxɔ nu | Etɔxɛ sealable anyigba alo coextruded nutrenu ƒuƒoƒo | Nutsyɔnu tɔxɛwo kple nubablɛwo ƒe xɔtuɖoɖowo |
| BOPET si woate ŋu atsɔ ga awɔe | Anyigba si wowɔ na ga ƒe ƒuƒu | Metalized packaging, atsyɔ̃ɖoɖo kple mɔxenu film |
| BOPET si ƒe Mɔxenu Kɔkɔe | Nu tɔxɛ siwo wotsɔ blaa nu alo nusiwo wotsɔ dzraa nu ɖo ɖea gas alo tsi ƒe kaka dzi kpɔtɔna | Nubablɛ siwo te ŋu trɔna bɔbɔe siwo te ŋu nɔa te ɖe ɣeyiɣi si woatsɔ adzrae nu |
| BOPET si Wotsɔ UV-si Li Ke | UV-dzikpɔkpɔ ƒe nɔnɔme tɔxɛwo | Dɔwɔƒewo, nukpɔkpɔ kple ɣe ƒe dɔwɔwɔ tiatia aɖewo |
| Ðe asi le BOPET ŋu | Ðe asi le nusiwo wotsɔ blaa nu abe silicone ene ŋu le dzesi siwo sɔ dzi | Adhesives, labels, composites kple dɔwɔƒewo ƒe tɔtrɔ |
Film ƒe titrime kpɔa ŋusẽ ɖe tensile nuwɔna, sesẽme, kutsetse, mɔxenu, gazazã kple tɔtrɔ ƒe nɔnɔmewo dzi. Ele be nuƒlelawo nagblɔ eƒe titrime le ŋkɔ me kple mɔɖeɖe ɖe nu ŋu si dzi woda asi ɖo siaa.
Ele be nubablɛ kple nukpɔkpɔ ƒe dɔwɔwɔ siwo me kɔ ŋutɔ naɖe nukpɔkpɔ ƒe nudidiwo gɔme tsɔ wu be woaɖo ŋu ɖe nya 'si me kɔ.' ko ŋu.
Anyigba ƒe keklẽ kpɔa ŋusẽ ɖe eƒe dzedzeme dzi le megbetata, lamination kple nubabla ƒe tɔtrɔ megbe. Zi geɖe la, wotiaa BOPET si klẽna ŋutɔ na xɔtunu siwo wota nyuie.
Ele be woada tensile strength kple elongation kpɔ le MD kple TD siaa me elabena film la toa agba vovovowo me le agbalẽtata, slitting, laminating kple package mamlɛtɔ zazã me.
Dzoxɔxɔ ƒe ɖeɖeɖa va zua nu vevi ne film to ya dzodzoe ƒe nufamɔ̃wo, nufamɔ̃ siwo wotsɔ blaa nu, lamination dɔwɔnuwo alo dzoxɔxɔ si kɔ ƒe dɔwɔwɔ bubuwo me. Ele be woade dodokpɔ ƒe dzoxɔxɔ kple ɣeyiɣi si woatsɔ awɔe ne wole shrinkage ƒe nɔnɔmewo sɔ kple wo nɔewo.
Coefficient of friction (COF) kpɔa ŋusẽ ɖe alesi film la zɔna le rollers dzi, si wɔa kɔla, mɔfianu kple mɔ̃ bubuwo ƒe anyigba dzi. Film si le glidzaglidza akpa alo si ƒe ʋuʋudedi sɔ gbɔ akpa ate ŋu ahe kuxiwo vɛ le eŋudɔwɔwɔ me le alesi wòtrɔa asi le eŋu nu.
Anyigba ƒe tete le vevie ŋutɔ na agbalẽtata, nutsyɔtsyɔ kple adhesive lamination. Ele be nuƒlelawo naɖe eme nenye be atikewɔwɔ hiã le akpa ɖeka alo akpa evea siaa eye woaɖo kpe atikewɔwɔ ƒe agbɔsɔsɔ si hiã dzi hafi awɔe.
Standard BOPET naa gas kple ʋeʋẽ ƒe mɔxenu si ŋu viɖe le kpe ɖe mɔ̃ɖaŋunu sesẽwo ŋu, gake mele be nuƒlelawo natsɔ BOPET film ɖesiaɖe si me kɔ la ade hatsotso me le wo ɖokui si be enye film si me woblaa nu le si me mɔxenu gã aɖe le o.
Ne nusi wobla ɖe agba me la sea veve ɖe oxygen alo tsidzadza nu ŋutɔ la, ele be nubablɛ ƒe mɔ̃ɖaŋudɔwɔla naɖe OTR kple WVTR ƒe taɖodzinu siwo woate ŋu adzidze na laminate bliboa.
OTR dzidzea oxygen si toa film alo agbaa me le dodokpɔ ƒe nɔnɔme siwo woɖe fia me. OTR si bɔbɔ ɖe anyi fia be oxygen-mɔxenu ƒe dɔwɔwɔ sesẽ wu.
WVTR dzidzea tsi ƒe dzoxɔxɔ ƒe kaka le dzoxɔxɔ kple fafa ƒe nɔnɔme siwo woɖo ɖi me. WVTR si bɔbɔ ɖe anyi fia be tsidzadza-mɔxenu ƒe dɔwɔwɔ sesẽ wu.
Dɔ siwo hiã mɔxenu si lolo ŋutɔ ate ŋu ada xɔtunu tɔxɛ siwo wofa abe AlOx, SiOx, PVDC alo mɔxenu mɔ̃ɖaŋununya bubu siwo me kɔ la kpɔ le wo zazã, wo ŋudɔwɔwɔ, wo gbugbɔgazã ƒe aɖaŋu kple teƒe si woayi-asi ƒe nudidiwo nu.
Metallizing BOPET ate ŋu atrɔ optical kple mɔxenu ƒe dɔwɔwɔ vevie. Zi geɖe la, wotiaa PET si wotsɔ ga wɔe ne woda asi ɖe nusiwo me mekɔ o kple mɔxenu si wodo ɖe ŋgɔ dzi, evɔ mɔxenu gã ƒe dɔ siwo me kɔ ya hiã mɔ̃ɖaŋununya vovovowo.
Mele be woagblɔ BOPET gbadzaa si wozãna ɖaa le eɖokui si be enye dzoxɔxɔ-nutrenu si le agba si te ŋu trɔna bɔbɔe me o.
Le geɖe siwo bɔ me la, BOPET subɔna abe agbalẽtata kple xɔtuɖaŋu gota web , esime PE, CPP alo nutrenu film bubu naa nutrenu ƒe anyigba.
Ne ehiã be woatsɔ dzoxɔxɔ atre polyester film la nu tẽ la, ele be nuƒlelawo nabia be woawɔ BOPET ƒe dzesi si ŋu wotrɔ asi le etɔxɛe si woate ŋu atre dzoxɔxɔ nu alo woate ŋu aŋe eye woaɖe nutrenu ƒe nutrenu, dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wòanɔ anyi kple nutrenu ƒe ŋusẽ si hiã la me.
Wozãa BOPET geɖe abe gotagome agbalẽtata kple xɔtuɖaŋu ƒe web ene le laminated flexible packaging me. Eƒe didime ƒe liƒo kpena ɖe agbalẽtata ƒe ŋkɔ ŋɔŋlɔ ŋu esime eƒe sesẽ kple mɔ̃ɖaŋununya ƒe dɔwɔwɔ kpena ɖe kotoku alo agbalẽvi si wowu enu ŋu.
BOPET/PE laminate ate ŋu aƒo polyester ƒe agbalẽtata kple eƒe liƒo nu ƒu kple polyethylene ƒe nutrenu ƒe dɔwɔwɔ. Ele be woatia PE ƒe wɔwɔme tututu le nutrenu ƒe dzoxɔxɔ, nusiwo le eme kple nusiwo wotsɔ blaa nu me nu.
Wozãa BOPET/CPP xɔtuɖoɖowo le nubablɛ ƒe ɖoɖo tiatia aɖewo me afisi polyester naa gota xɔtuɖoɖo kple web si wota esime CPP naa nutrenu kple nubablɛ tɔxɛ ƒe nɔnɔme bubuwo.
Agbalẽtata ɖe megbe ate ŋu akpɔ nɔnɔmetata siwo le laminate me ta. Ele be woado ink, atikewɔwɔ ƒe agbɔsɔsɔme, aŋenu kple dɔyɔyɔ ƒe nɔnɔmewo kpɔ ɖekae elabena film ƒe eme kɔ nyuie ɖeɖe mefia be agbalẽtata ƒe alé ɖe nu ŋu o.
Corona dɔdamɔnu dzia ŋusẽ si le anyigba dzi ɖe edzi be wòana tsidzadza kple eƒe ƒoƒo nanyo ɖe edzi na ink, nusiwo wotsɔ blaa nu kple nusiwo léna ɖe wo nɔewo ŋu siwo sɔ. Woate ŋu ana atikewɔwɔ le akpa ɖeka alo akpa eveawo le tɔtrɔ ƒe nudidiwo nu.
Polyester film siwo wotsɔ atike wɔe ate ŋu ana adhesion ƒe dɔwɔwɔ bubuwo na ink, coating kple adhesive systems tɔxɛwo.
Wozãa BOPET geɖe le nubablɛ siwo wotsɔa lãgbalẽ ƒuƒu wɔe siwo te ŋu trɔna bɔbɔe me. Ele be woada atike si wotsɔ léa nu ɖe nu ŋu, nusi wotsɔ blaa nu ƒe kpekpeme, dɔyɔyɔ, atike si susɔ, film ƒe dɔwɔwɔ kple nuɖuɖu alo dɔwɔƒewo ƒe nudidi mamlɛawo kpɔ abe ɖoɖo blibo ene.
BOPET film siwo sɔ ate ŋu anye substrates hã le extrusion-laminated xɔtuɖoɖowo me. Ele be woaɖo kpe anyigbadzidɔwɔwɔ kple kadodo ƒe dɔwɔwɔ dzi kple aŋɔ kple dɔwɔwɔ ƒe nɔnɔme siwo woɖo be woawɔ.
Woateŋu azã BOPET si me kɔ ŋutɔ abe fesre nu si me kɔ ene le pepawo ƒe bablawo, nunanaɖakawo, nuɖuɖuɖakawo, atsyɔ̃ɖomiɖakawo kple asitsaƒewo ƒe ɖeɖefia xɔwo me afisi wòle be asisi nakpɔ nusi wowɔ to agbaa me.
Ele be nuƒlelawo nada film ƒe titrime, eme kɔ, afu, sesẽ, adhesive ƒe ɖekawɔwɔ, lãɖeɖe ƒe nuwɔna kple kakɛ-fesre ƒe tɔtrɔ ƒe dɔwɔwɔ kpɔ.
Wozãa polyester film geɖe le elektrikdɔwo me elabena dzesi siwo sɔ naa didime ƒe liƒo kple dielectric dɔwɔwɔ si ŋu viɖe le.
Dɔwɔwɔ siwo bɔ ate ŋu anye nusiwo wotsɔ xea mɔ na mɔ̃wo, transformers, capacitors, cables kple electronic assemblies.
Mele be woabu BOPET si me kɔ si ƒe dzesi le nubablɛwo katã me le eɖokui si be enye elektrik-nulénu ƒe dzeside si dzi woda asi ɖo o. Ele be elektrikdɔwo nagblɔ dielectric ŋusẽ si hiã, dzoxɔxɔ ƒe hatsotso, titrime, dzidzenu siwo sɔ kple dɔwɔwɔ ƒe nɔnɔme siwo anɔ anyi ɣeyiɣi didi.
Polyester ateŋu anye nusi li ke tsɔla na silicone alo asiɖeɖe le nu bubu siwo wozãna le adhesive, composite kple converting dɔwɔƒewo. Ele be woagblɔ ŋusẽ si woatsɔ aɖe asi le eŋu le aŋenu alo aŋɔ mamlɛtɔ ƒe ɖoɖo nu.
Woate ŋu azã BOPET abe nusi li ke le didime nu alo ametakpɔnu ene le dɔwɔƒewo ƒe nuwɔna tiatia aɖewo me. Tsitretsitsi ɖe ʋuʋudedi ŋu kple eƒe anyigba ƒe sesẽme nɔ te ɖe grade alo nusi tututu wotsɔ blae dzi.
PET film ate ŋu anye megbedede na adhesive tapes siwo wɔa dɔ nyuie ne film la ƒe titrime, eƒe anyigba dzi dɔwɔwɔ, adhesive chemistry kple mɔ̃ɖaŋununya ƒe nɔnɔme mamlɛawo ɖo dɔa ƒe nudidiwo gbɔ.
| Film | Typical Ŋusẽ | Akpa Gbãtɔ |
|---|---|---|
| BOPET ƒe ŋkɔ | Kɔkɔ tensile ŋusẽ, didime liƒo, sesẽ, tata web liƒo kple dzoxɔxɔ dɔwɔwɔ | Agbalẽtata ƒe ƒuƒoƒo, lamination substrate, insulation kple dɔwɔƒewo ƒe tsɔtsɔ |
| BOPP ƒe nya | Density sue, tsidzadza mɔxenu nyui kple nubabla ƒe dɔwɔwɔ | Nubablɛwo kple nuŋɔŋlɔ siwo woate ŋu atrɔ asi le |
| CPP | Nutrenu ƒe nɔnɔme siwo ŋu viɖe le kple asitɔtrɔ le nɔnɔmewo ŋu | Ememe sealant layer kple etɔxɛ bablawo |
| PE | Flexible nutrenu ƒuƒoƒo kple gbadzaa packaging zazã | Sealant kple ememe web le laminates me |
Xexeame katã ƒe 'nyuitɔ' film si te ŋu trɔna ɖe nubablɛwo ŋu meli o. Ele be woatu nusiwo woatsɔ awɔ dɔe ƒe tiatia ɖe akpa si ƒuƒoƒo ɖesiaɖe wɔna le agbalẽvi bliboa me dzi.
Akpa ɖeka ƒe dɔwɔwɔ ɖea vi ne anyigba ɖeka koe hiã be woata agbalẽ, alé nu ɖe eŋu, atsyɔ nu edzi alo awɔ ga.
Woate ŋu anyo wu be woawɔ dɔ na axa eve ne ele be anyigba eveawo siaa nawɔ dɔ kple nuŋlɔtsiwo, nusiwo wotsɔna léa nu ɖe nu ŋu alo nusiwo wotsɔ blaa nu siwo wɔa dɔ.
Ele be woatsɔ roll winding direction kple treated-side orientation ade nuƒle ƒe nɔnɔmetata me ale be film la nage ɖe asisi la ƒe agbalẽtamɔ̃, coater alo laminator me le mɔ nyuitɔ nu.
Wozãa BOPET zi geɖe le nuɖuɖu babla ƒe xɔtuɖoɖowo me, gake mele be woaɖɔ polyester film si me kɔ si wozãna na nusianu le eɖokui si be woda asi ɖe edzi na nuɖuɖu ɖesiaɖe si woatsɔ aƒo ka na nuɖuɖu tẽ o.
Ele be nuƒlelawo nade dzesi nuɖuɖu ƒomevi, kadodo ƒe nɔnɔmewo, dɔwɔwɔ ƒe dzoxɔxɔ, laminate ƒe wɔwɔme mamlɛtɔ kple asi si woayi, emegbe woabia nuŋlɔɖi siwo sɔ na film ƒe dzeside tututu.
BOPET nye nusi wotu ɖe PET dzi, gake nenye be woate ŋu agbugbɔ nusi wowɔ vɔ la awɔ dɔ ŋutɔŋutɔ la nɔ te ɖe xɔtutu bliboa kple nuƒoƒoƒu kple wo gbugbɔgazã ƒe ɖoɖo siwo li dzi.
Le kpɔɖeŋu me, mele be woaɖɔ BOPET/adhesive/PE multilayer kotoku si wota be woate ŋu agbugbɔ awɔe le esi ƒuƒoƒo ɖeka nye PET ta ko o. Ink, nusiwo wotsɔ blaa nu, nusiwo wotsɔna léa nu ɖe nu ŋu, gawɔwɔ, polymer bubuwo, ƒuƒoƒo ƒe titrime kple nutoa me ƒe se siwo ku ɖe nusiwo wogbugbɔ zãna ŋu katã kpɔa ŋusẽ ɖe alesi woate ŋu agbugbɔ agbalẽvi si wowu enu la awɔ dɔe dzi.
Mele be woaɖɔ standard clear BOPET le eɖokui si be enye film si me UV-si li ke ɣeyiɣi didi o. Ele be gota, ɣe ƒe ŋusẽ dzi kpɔkpɔ kple nukpɔkpɔ ƒe dɔwo nagblɔ dzesi si sɔ si UV-si li ke kpe ɖe nɔnɔme siwo wokpɔ mɔ be woakpɔ ŋu.
Anti-static dɔwɔwɔ bia be woawɔ atike alo nusi sɔ. Ele be elektrɔnikmɔ̃wo kple ke-sesẽ ƒe dɔwɔwɔwo naɖe anyigba ƒe tsitretsitsi ƒe didime si hiã la gɔme tsɔ wu be woasusui be PET film si wozãna ɖaa naa ESD dziɖuɖu.
Anti-fog nuwɔna hã nye dɔwɔwɔ ƒe anyigba ƒe nɔnɔme eye ele be woagblɔe ɖe vovo ne condensation control le vevie.
Ele be woada BOPET film si ƒe nyonyome deŋgɔ la kpɔ le nusiwo wotsɔ wɔe ƒe nɔnɔmewo kple agbalẽ xatsaxatsa ƒe nyonyome siaa ta.
Titrime ƒe nɔnɔme: lé ŋku ɖe ŋkɔdzidzenu kple atitsoga-web ƒe ɖekawɔwɔ ŋu.
Kekeme: ɖo kpe slit-kekeme ƒe mɔɖeɖe dzi.
Haze kple eme kɔ: ele vevie na nubablɛ siwo me kɔ kple nukpɔkpɔ zazã.
Gloss: ɖo kpe anyigba ƒe dzedzeme dzi le afisi wòsɔ le.
MD/TD ƒe tensile nɔnɔmewo: kpɔe ɖa le nɔnɔme si dzi woda asi ɖo la nu.
MD/TD dzoxɔxɔ ƒe ʋuʋu: da asɔ le dodokpɔ ƒe nɔnɔme siwo wogblɔ me.
COF: ɖo kpe mɔ̃a zazã ƒe nɔnɔmewo dzi.
Anyigba ƒe tete: ɖo kpe axa si ŋu wowɔ atike ɖo ƒe dɔwɔwɔ dzi hafi nàtae alo ablae.
Nusiwo gblẽ le anyigba ŋu: lé ŋku ɖe gel, ʋuʋudedi, ɖiƒoƒo kple ŋku ƒe dzesiwo ŋu.
Mia nugbɔwo: lé ŋku ɖe didiƒekpɔmɔ̃, nugbɔ ƒe gbegblẽ kple winding ƒe ɖoɖowɔwɔ ŋu.
Winding tension: ɖo kpe edzi be agbalẽ xatsaxatsaa mekpɔ flitete alo xexe si gbɔ eme o.
Splices: ɖe agbɔsɔsɔme si ŋu woɖe mɔ ɖo kple dzesidede mɔnu me.
Gblɔ nenye be woazã film la na nubablɛ siwo te ŋu trɔna bɔbɔe, agbalẽtata, lamination, ŋkɔwo, kakɛ fesrewo, elektrik-nulénu, asiɖeɖe le film, gawɔwɔ alo dɔwɔƒewo ƒe ɖoɖo bubu.
Titrime kpɔa ŋusẽ ɖe sesẽme, kutsetse, ŋusẽ, asiléle kple tɔtrɔ ƒe ganyawo dzi. Gblɔ gauge si woyɔna be nominal gauge kple tolerance ɣesiaɣi si wòli.
Le dɔwɔwɔ siwo me kɔ ŋutɔ gome la, na haze, kekeli ƒe kaka kple keklẽ ƒe nudidi siwo dzi woda asi ɖo.
Gblɔ film si ŋu womewɔ atike ɖo o, si ŋu wotsɔ corona ɖo alo esi wotsɔ atike wɔe eye nàgblɔ nenye be ehiã be woawɔ atike na akpa ɖeka alo evea siaa.
De dzesi gravure, flexographic, screen, UV alo agbalẽtamɔ̃ bubu ɖekae kple ink dɔwɔƒea alo ink ƒomea ne anya wɔ.
Na laminate bliboa, le kpɔɖeŋu me BOPET/PE, BOPET/CPP alo xɔtuɖoɖo bubu, kpe ɖe adhesive kple curing nɔnɔmewo ŋu.
Ne mɔxenu le vevie la, na OTR kple WVTR si woɖo taɖodzinu na la nakpɔ dzoxɔxɔ, fafa kple dodokpɔmɔnu si hiã.
Na agbalẽ xatsaxatsa ƒe kekeme, nu vevi ƒe didime, gotagome ƒe didime si sɔ gbɔ wu, agbalẽ xatsaxatsa ƒe didime alo kpekpeme, ʋuʋudedi ƒe mɔfiame kple atikewɔwɔ-axa ƒe nɔnɔme.
De dzesi dzoxɔxɔ-nutrenu, anti-static, anti-fog, UV, asiɖeɖe le eŋu, metallizing, low-COF, high-COF alo dɔwɔwɔ ƒe nudidi bubuwo kɔte.
Da film la kpɔ le agbalẽtamɔ̃, laminator, coater, slitter alo packaging line ŋutɔŋutɔ dzi hafi nàɖo kpe asitsatsa ƒe ewɔwɔ dzi.
Dɔwɔwɔ: babla, agbalẽtata, lamination, dzeside, insulation, asiɖeɖe le eŋu, metallizing alo zazã bubu.
Titrime: micron ƒe asixɔxɔ le ŋkɔ me kple mɔɖeɖe ɖe nu ŋu.
Roll ƒe kekeme: slit ƒe kekeme si wobia.
Core: core ememe didime si wobia.
Roll OD: gotagome didime si dzi woda asi ɖo wu.
Roll ƒe didime alo kpekpeme: le mɔ̃a ƒe nudidiwo nu.
Nukpɔkpɔ ƒe nɔnɔmewo: haze, transmittance kple gloss le afisi wòsɔ le.
Atikewɔwɔ le anyigba dzi: womewɔ atike na o, corona alo atikewo zazã.
Akpa siwo ŋu wowɔ atike ɖo: akpa ɖeka alo akpa eve.
Anyigba ƒe tete: atikewɔwɔ ƒe agbɔsɔsɔ si hiã.
COF: mɔ̃-dɔwɔwɔ ƒe didime si wobia ne ele vevie ŋutɔ.
Dzoxɔxɔ ƒe ʋuʋu: MD/TD ƒe nudidi kple dodokpɔ ƒe nɔnɔmewo.
Agbalẽtata: agbalẽtata ƒe ɖoɖo kple nuŋlɔtsi ƒomevi.
Lamination: adhesive kple blibo laminate wɔwɔme.
Mɔxenu: taɖodzinu OTR kple WVTR ne ehiã.
Dɔ tɔxɛ: dzoxɔxɔ nutrenu, UV, tsitretsitsi ɖe static, tsitretsitsi ɖe afu, metallizing alo asiɖeɖe le nutsyɔtsyɔ.
Sedziwɔwɔ: nuɖuɖu-kadodo, elektrik, dɔwɔƒewo alo teƒe-asi ƒe nuŋlɔɖiwo.
Agbɔsɔsɔ: kpɔɖeŋu, dodokpɔ kple asitsatsa ƒe agbɔsɔsɔ si wobu.
Wallis naa BOPET film si me kɔ na nubablɛwɔlawo, agbalẽtamɔ̃wo, laminators, label converters, dɔwɔƒewo film processors kple asitsalawo bubuwo.
Ele be woatia film ƒo xlã asisi la ƒe agbalẽtata, lamination, metallizing, elektrik alo babla ƒe ɖoɖo mamlɛtɔ tsɔ wu be woawɔ nu ɖe BOPET ƒe hatsotso ɖesiaɖe si me kɔ ŋu be woate ŋu atrɔ ɖe wo nɔewo ŋu.
Nuƒlelawo ate ŋu ana titrime si hiã, agbalẽ xatsaxatsa ƒe kekeme, nuto, ʋuʋudedi kple tɔtrɔ ƒe nɔnɔme bubuwo hena dɔa ƒe dodokpɔ.
Woateŋu aƒo nu tso Corona ƒe atikewɔwɔ, agbalẽtata ƒe adhesion, lamination kple anyigba ƒe nudidi bubuwo ŋu le ewɔwɔ ƒe ɖoɖo si woɖo be woawɔ nu.
Kpɔɖeŋu ƒe dzedze ɖea mɔ na nuƒlelawo be woaɖo kpe asiléle, agbalẽtata, lamination, optical ƒe nyonyome kple agbalẽ xatsaxatsa ƒe dɔwɔwɔ dzi hafi ada asi ɖe asitsatsa ƒe agbɔsɔsɔmewo dzi.
BOPET tsi tre ɖi na polyethylene terephthalate si wotu ɖe axa eve dzi. Enye PET polyester film si keke ɖe mɔ̃ kple mɔ siwo le tsia dzi siaa.
BOPET nye PET film ƒomevi aɖe koŋ si wowɔna to biaxial orientation dzi. Menye PET-gbalẽvi alo film ɖesiaɖee nye esi wotu ɖe biaxial dzi o.
Efia be woɖo PET film la ɖe mɔ̃a ƒe mɔfiame kple mɔ si le tsia dzi. Esiae nye biaxial-orientation ƒe ɖoɖo si ɖea nu me si wozãna tsɔ wɔa BOPET.
Zãzã siwo bɔ dometɔ aɖewoe nye nubablɛ siwo te ŋu trɔna bɔbɔe, agbalẽtata, lamination, kakɛ fesrewo, ŋkɔwo, elektrik-nulénu, asiɖeɖe le filmwo, metallizing, kasɛtwo kple dɔwɔƒewo ƒe agbatsɔʋuwo zazã.
Ɛ̃. Wozãa BOPET geɖe abe xɔtuɖaŋu kple gotagome ƒuƒoƒo si woate ŋu ata ene le nubablɛ siwo te ŋu trɔna bɔbɔe me. Ele kokoko be woatrɔ asi le nubablɛ bliboa ƒe wɔwɔme ŋu le nutrenu, mɔxenu kple eƒe agbenɔƒe ƒe nudidiwo nu.
Standard transparent BOPET naa gas kple ʋeʋẽ ƒe mɔxenu si ŋu viɖe le gake mele be woabui le eɖokui si be enye film si me mɔxenu gã le o. Mɔxenu gãwo zazã ate ŋu abia be woatsɔ nu tɔxɛwo atsyɔ wo dzi, woatsɔ ga awɔe alo woatsɔ mɔxenu ƒe ƒuƒoƒo siwo woda ɖe anyigba.
Standard plain BOPET menye dzoxɔxɔ-nutrenu film kokoko o. Ele be nutrenu tẽ ƒe dɔwɔwɔwo nazã dzoxɔxɔ-nutrenu ƒe hatsotso si ŋu wotrɔ asi le etɔxɛe alo aƒo BOPET nu ƒu kple nutrenu ƒe ƒuƒoƒo si sɔ abe PE alo CPP ene.
Ɛ̃. Corona dɔdamɔnu ateŋu adzi anyigba ƒe ŋusẽ ɖe edzi na agbalẽtata, nutsyɔtsyɔ kple adhesive banding. Ele be nuƒlelawo nagblɔ atikewɔwɔ ƒe akpa kple anyigba ƒe tete ƒe sesẽme si wobia.
Ɛ̃. Wozãa BOPET si ŋu wowɔ atike ɖo si sɔ na gravure, flexographic kple agbalẽtata ƒe ɖoɖo bubuwo. Ele be woado film ƒe dɔwɔwɔ, ink ƒe ɖoɖoa kple lamination ƒe ɖoɖo si kplɔe ɖo la kpɔ ɖekae.
Ɛ̃. Wozãa BOPET zi geɖe le lamination ƒuƒu me. Ele be woadze na aŋenu tiatia, anyigbadzidɔwɔwɔ, dɔyɔyɔ kple web evelia be wòanye xɔtuɖoɖo blibo.
BOPET ƒe hatsotso siwo sɔ siwo woate ŋu atsɔ ga awɔe ate ŋu axɔ ga ƒe ƒuƒoƒo si woda ɖe anyigba be woatrɔ asi le mɔxenu, dzedzeme kple nukpɔkpɔ ƒe nɔnɔmewo ŋu.
BOPET nye polyester-si wotu ɖe edzi eye zi geɖe la, wotiae ɖe ŋusẽ, sesẽ, didime ƒe liƒo kple dzoxɔxɔ ƒe dɔwɔwɔ ta. BOPP nye polypropylene-si wotu ɖe edzi eye ateŋu ana viɖewo abe ʋeʋẽ si bɔbɔ ɖe anyi wu kple tsidzadza-mɔxenu ƒe dɔwɔwɔ sesẽ ene. Tiatia mamlɛtɔ nɔ te ɖe agbalẽvi ƒe ɖoɖo dzi.
COF gɔmee nye ʋuʋudedi ƒe xexlẽdzesi. Ekpɔa ŋusẽ ɖe alesi sinima la ƒua du toa eɖokui kple mɔ̃a ƒe akpa aɖewo dzi le dɔwɔwɔ kabakaba me dzi.
Nusiwo dzi ɖe kpɔtɔ fũ le dɔwɔwɔ dzodzoe me ateŋu ahe vodadawo le ŋkɔ ŋɔŋlɔ me, flitetewo kple didime ƒe tɔtrɔwo vɛ. Eyata ele be woada eƒe ɖeɖeɖa kpɔ le nɔnɔme siwo sɔ kple asisi la ƒe dɔwɔwɔ me.
Wozãa BOPET geɖe le nuɖuɖu-babla xɔtuɖoɖowo me, gake ele be nuƒlelawo naɖo kpe sedziwɔwɔ ŋuti nuŋlɔɖiwo dzi na film ƒe hatsotso si tututu, nusiwo wotsɔ blaa nu, ink, aŋetu ƒe wɔwɔme kple asi si woɖo be woaƒle.
BOPET nye esi wotu ɖe PET dzi, gake nusiwo woate ŋu azã ake ŋutɔŋutɔ nɔ te ɖe xɔ si wowu enu bliboe kple nutoa me nuwo gbugbɔgazã ƒe xɔtuɖoɖowo dzi. Mele be woagblɔ tso nu geɖe ƒe laminate ŋu le wo ɖokui si be woate ŋu azã wo ake o.
UV ƒe dɔwɔwɔ ɣeyiɣi didi nye grade tɔxɛ aɖe koŋ. Ele be gota alo nukpɔkpɔ ƒe dɔwo nabia be woawɔ polyester film si woɖo ɖi na UV-si li ke.
Menye nenema kokoko o. Anti-static alo ESD dɔwɔwɔwo hiã na dɔwɔwɔ ƒe dzesi alo nutsyɔnu si sɔ kple elektrikŋusẽ-tsitretsitsi ƒe nɔnɔme si woɖe fia.
Na dɔwɔwɔ, titrime, kekeme, nuto, agbalẽ xatsaxatsa OD, atikewɔwɔ, optical nudidiwo, COF, shrinkage, tata alo lamination ɖoɖo, mɔxenu taɖodzinu, dɔ tɔxɛwo, agbɔsɔsɔme kple yiyi.
Ɛ̃. Ewɔwɔ dodokpɔwo ate ŋu aɖo kpe agbalẽtata ƒe adhesion, lamination bonding, web handling, COF, optical quality, shrinkage kple roll dɔwɔwɔ le nuƒlela ƒe dɔwɔwɔ ƒe nɔnɔme ŋutɔŋutɔwo te.
BOPET si me kɔ nye polyester substrate si wɔa dɔ nyuie elabena biaxial orientation naa ŋusẽ, didime ƒe liƒo, eme kɔ nyuie kple dɔwɔwɔ ƒe tɔtrɔ ƒe dadasɔ nyuie.
Gake ele be dɔnyala ƒe sinima tiatia nayi ŋgɔ wu nyagbɔgblɔ 'mɔ eve ƒe keke BOPET.' Ele be nuƒlelawo naɖe eme nenye be dɔa bia be woawɔ dɔ le mɔ gbadza, si wotsɔ corona wɔe, si wotsɔ atike wɔe, si woate ŋu atre dzoxɔxɔ nu, si woate ŋu atsɔ ga awɔe, si me mɔxenu gã le, si woate ŋu atsɔ UV-si li ke, si tsi tre ɖe dɔlékuiwo ŋu alo BOPET ƒe dzesi tɔxɛ bubu.
Ðo wò titrime, kekeme, agbalẽ xatsaxatsa ƒe ɖoɖo, anyigba ƒe dɔwɔwɔ, agbalẽtata alo lamination ƒe ɖoɖo, taɖodzinu optical nɔnɔmewo kple nuwuwu zazã ƒe nudidiwo ɖa be woadzro BOPET film solution si sɔ si me kɔ nyuie me.
