Views: 0 Author: Sayt Ɛditɔ Pɔblish Taym: 2026-08-06 Ɔrijin: Ples
Transparent BOPET film , we dɛn kin kɔl bak biaxially oriented polyethylene terephthalate film ɔ biaxially oriented polyester film, na wan tin PET film we dɛn ɛnjinɛri tru strɛch insay ɔl tu di mashin dairekshɔn (MD) ɛn transvas dairekshɔn (TD).
Dis biaxial orienteshɔn de gi BOPET wan impɔtant kɔmbaynshɔn fɔ tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, ɔptik klariti, stiffnɛs, tɛmal stebiliti ɛn kɔnvɔyt pefɔmɛns . Dɛn kwaliti ya de mek transparent BOPET fim we dɛn de yuz bɔku bɔku wan as printin wɛb, lamineshɔn sabstret, pak layt, lɛbl matirial, ilɛktrik insuleshɔn fim ɛn industrial kyaria fim.
Bɔt fɔ pɔshɔnal bayer dɛn, fɔ spɛsifa ɔl 'klia BOPET fim' nɔ inof. Film selekshɔn fɔ tink bak bɔt tik, wit, haz, layt transmishɔn, glos, kɔfishin fɔ frikshɔn, tɛmal shrinkage, MD/TD tɛnsiɛl prɔpati, sɔfayz tritmɛnt, korona lɛvɛl, printin we, adhesive sistem, barɛri target ɛn fayn laminate strɔkchɔ.
BOPET tinap fɔ Biaxially Oriented Polyethylene Tɛriftalɛt . PET polimכr dεn kin kכnvכlt fכs to film εn afta dat dεn kin כriεnt am na tu dεyshכn dεm we dεn de mek am.
Mashin dairekshɔn na di dairekshɔn we di fim de travul tru di prodakshɔn layn. Stret di film in dis dairekshכn de εp כriεnt di PET mכlikul strכkchכ εn kכntribyut to tεnsil εn dimεnshכnal pεrformεns.
Transvas dairekshɔn de rɔn akɔdin to di wit we di fim gɛt. Orienteshכn in כl tu di MD εn TD de prodyuz di bεlε film strכkchכ we de aכsכsiayt wit BOPET.
Nɔ, insay tɛknikal tɛminɔlɔji, BOPET dɔn ɔlrɛdi min se di PET fim dɔn biaxially oriented. 'Tu-way strɛch' na diskriptiv we fɔ ɛksplen di MD ɛn TD strɛch prɔses pas wan sɛpret kategori fɔ polyɛsta film.
Biaxial orientation de mek wan strɔng polyester film we ebul fɔ mentɛn wɛb intɛgriti we dɛn de print, kɔt, slit, mɛtalayz, lamination ɛn ɔda rol-to-rol prɔses.
Stebul dimɛnshɔn dɛn impɔtant mɔ fɔ prɛsishɔn printin, rɛjista, kɔtin, ilɛktrik insuleshɔn ɛn multilayer lamination. If yu chenj di dimɛnshɔnal pasmak, i kin mek yu gɛt wrinkles, rɛjista mistek ɔ laminate distɔrshɔn.
Transparent BOPET kin gi ay klia ɛn glos fɔ aplikeshɔn usay di pak prodak, grafik ɔ ɔndalayn sabstret fɔ stil de fɔ si.
Polyester film na valyu fɔ in thermal ɛn dimɛnshɔnal stebiliti we dɛn de print, drɛy, lamination ɛn ɔda kɔnvɔyt ɔpreshɔn. Di alawable prɔsesin tɛmpracha ɛn shrinkage fɔ stil chɛk agens di ɛksaktɔl BOPET gred.
Wan pan di impɔtant sos prinsipul dɛn na dat nɔto ɔl transparent BOPET fim gɛt di sem sɔfa ɔ fɛnshɔnal prɔpati.
| BOPET Tayp | Men Fɔnkshɔn | Tipik Aplikeshɔn |
|---|---|---|
| Plɛn Transparent BOPET | Jɛnɛral-pɔpɔz klia polyɛsta sabstret | Lamination, kɔnvɔyt, industrial kyaria film dɛn |
| BOPET we dɛn dɔn trit wit Korona | Ay sɔfayz ɛnaji fɔ kɔmpitabl ink, kɔtin ɔ adeziv | Printin ɛn laminɛshɔn |
| BOPET we dɛn kɔt wit kemikal | Promot adheshon ɔ ad fכnshכnal sכfayz prכpati dεm | Printin, kotin ɛn spɛshal laminɛshɔn |
| BOPET we yu kin sial wit ɔt | Speshal sial surface ɔ coextruded siling layt | Speshal lidding ɛn pak strɔkchɔ dɛn |
| BOPET we dɛn kin mek wit mɛtal | Surface we dɛn mek fɔ mɛtal dipɔzishɔn | Metalized pak, dekorativ ɛn barɛri film |
| BOPET we gɛt ay-baria | Speshal kotin ɔ dipɔsit layers de ridyus gas ɔ mɔstɔ transmishɔn | Shelf-layf-sɛnsitiv fleksibul pak |
| BOPET we gɛt UV-Stabiliz | Speshal UV-manejmɛnt prɔpati dɛn | Selekt industrial, optik ɛn solar aplikeshɔn dɛn |
| Rilis di BOPET | Rilis kɔtin lɛk silikon pan fayn gred dɛn | Adhesives, labels, kompoziyt ɛn industrial kɔnvɔtin |
Film tiknɛs de afɛkt tɛnsiɛl bihayvya, stiffnɛs, yield, barɛri, kɔst ɛn kɔnvɔyt kɔndishɔn. Di wan dɛn we de bay fɔ spɛsifa ɔl tu di nominal tik ɛn akseptabl tolɛreshɔn.
Ha-klari pakej ɛn displei aplikeshɔn fɔ difayn optik rikwaymɛnt instead fɔ abop pan di wɔd 'transparent.' Haz ɛn layt transmishɔn fɔ evalyu pan di ɛksaktɔ tik ɛn sɔfayz gred.
Surface gloss inflɔws di apinɛns afta rivas printin, lamination ɛn pak kɔnvɔshɔn. Bɔku tɛm dɛn kin pik BOPET we gɛt ay glos fɔ prɛmiɔm print strɔkchɔ dɛn.
Tensile strength ɛn elongation fɔ bi evaluate in ɔl tu di MD ɛn TD bikɔs di film de ɛkspiriɛns difrɛn lod dɛn we dɛn de print, slit, laminating ɛn fayn paket yuz.
Tɛmral shrinkage kin bi impɔtant we di fim pas tru ɔt-ɛya drya, kɔtin ɔvin, laminɛshɔn ikwipmɛnt ɔ ɔda ɛlevɛt-tɛmpracha prɔses. Tεst tεmprachכ εn εkspכzכn tεm fכ inklud we dεn de kכmpεr shrinkage spεsifikεshכn dεm.
Kɔfishin ɔf frikshɔn (COF) de afɛkt aw di fim de muv oba rɔla, fɔm kɔla, gayd ɛn ɔda mashin sɔfays. Film we tu slip ɔ tu ay in frikshɔn kin mek prɔblɛm wit aw fɔ handle dipen pan di kɔnvɔyt prɔses.
Surface tension na patikyula impɔtant fɔ print, kɔtin ɛn adhesive lamination. Di wan dɛn we de bay fɔ difayn if tritmɛnt nid fɔ de na wan ɔ ɔl tu say ɛn kɔnfɔm di tritmɛnt lɛvɛl we dɛn nid bifo dɛn prodyuz.
Standard BOPET de gi yusful gas ɛn aroma barɛri togɛda wit strɔng mɛkanikal prɔpati, bɔt di wan dɛn we de bay nɔ fɔ ɔtomɛtik klas ɛvri transparent BOPET fim as ay-baria pak fim.
We wan pak prodakt rili sɛnsitiv to ɔksijɛn ɔ mɔstɔ, di pak injinia fɔ difayn mɛzhɔbal OTR ɛn WVTR target fɔ di kɔmplit laminat.
OTR de mכsu כksijεn we de pas tru di film כ paket כnda difayn tεst kכndishכn dεm. lכw OTR de sho se i strכng כksijεn-baria pεrformεns.
WVTR de mɛzhɔ wata-vaypa transmishɔn ɔnda spɛsifikɛd tɛmpracha ɛn humiditi kɔndishɔn. Lɔwa WVTR de sho se di mɔstɔ-baria pefɔmɛns strɔng.
Projek dɛm we nid signifyant ay barɛri kin evalyu spɛshal kɔt strɔkchɔ dɛm lɛk AlOx, SiOx, PVDC ɔ ɔda transparent barɛri tɛnkɔlɔji dɛm dipen pan aplikeshɔn, prɔsesin, risaykul strateji ɛn dɛstineshɔn-maket rikwaymɛnt dɛm.
Metallizing BOPET kin chenj optik ɛn barɛri pefɔmɛns bad bad wan. Metalized PET na kɔmɔn we dɛn kin pik we opasiti ɛn ɛnhans barɛri na akseptabl, we transparent ay-baria prɔjek dɛn nid difrɛn kɔtin tɛnkɔlɔji dɛn.
Standard plain BOPET nɔ fɔ ɔtomɛtik spɛsifa as di ɔt-silin layt fɔ wan fleksibul pakej.
Insay bɔku kɔvɛnshɔnal fleksibul pak laminat, BOPET de sav as di printin ɛn strɔkchɔral ɔta wɛb , we PE, CPP ɔ ɔda sialant film de gi di silin sɔfays.
We dɛn nid fɔ sial di poliɛsta fim dairekt ɔt, di wan dɛn we de bay fɔ aks fɔ wan spɛshal dizayn we dɛn mek wit ɔt-sial ɔ we dɛn kin pul BOPET gred ɛn difayn di silin sabstret, tɛmpracha, prɛshɔn, di tɛm we dɛn kin de ɛn di trɛnk we dɛn nid fɔ sil.
BOPET na wan we dɛn de yuz bɔku bɔku wan as ɔda printin ɛn strɔkchɔral wɛb insay laminated fleksibul pak. I dimɛnshɔnal stebiliti de sɔpɔt printin rɛjista we in stiffnɛs ɛn mɛkanikal pefɔmɛns de kɔntribyut to di finish paus ɔ paket.
Wan BOPET/PE laminate kin kɔba di printabiliti ɛn stebiliti fɔ polyɛsta wit di siling funkshɔnaliti fɔ polyɛtilin. Di ekzak PE strɔkchɔ fɔ pik akɔdin to di sil tɛmpracha, di prɔdak kɔntinyu ɛn di ikwipmɛnt fɔ pak.
BOPET/CPP strɔkchɔ dɛn de yuz insay sɔm pakej sistɛm dɛn usay polyɛsta de gi di ɔda strɔkchɔral ɛn print wɛb we CPP de kɔntribyut fɔ silin ɛn ɔda pakej-spɛsifi k prɔpati dɛn.
Rivas printin kin protɛkt grafik dɛn insay laminat. Ink, tritmɛnt lɛvɛl, adhesive ɛn curing kɔndishɔn fɔ tɛst togɛda bikɔs gud film klia nɔmɔ nɔ de garanti printin adhesion.
Korona tritmɛnt de inkrisayz sɔfayz ɛnaji fɔ impɔtant wet ɛn adheshon fɔ kɔmpitabl ink, kɔtin ɛn adhesive. Dɛn kin gi tritmɛnt na wan say ɔ ɔl tu di say dɛn akɔdin to wetin dɛn nid fɔ chenj.
Kεmikכl trit polyεsta film kin gi adishכnal adheshon pεrformεns fכ spεsifi k ink, kכt εn adhesive sistεm.
BOPET na wan we dɛn kin yuz bɔku bɔku wan fɔ mek dray-laminated fleksibul pak. Adhesive chemistry, coating weight, curing, residual solvent, film tritmɛnt ɛn fayn fayn it ɔ industrial rikwaymɛnt dɛn fɔ evalyu as kɔmplit sistɛm.
Suitabl BOPET films kin sav bak as sabstret in extrusion-laminated strɔkchɔ dɛn. Surface tritmεnt εn bonding pεrformεns fכ kכnfכm wit di intended rεsin εn prכsεs kכndishכn dεm.
Dɛn kin yuz BOPET we gɛt ay klari as transparent winda matirial insay pepabɔd pak, gift bɔks, it katon, kɔsmɛtik bɔks ɛn rital displei strɔkchɔ usay di kɔstɔma fɔ si di prɔdak tru di paket.
Di wan dɛn we de bay fɔ evalyu di film tik, klia, haz, stiffness, adhesive kɔmpatibiliti, kɔt bihayvya ɛn katon-windo kɔnvɔyt pefɔmɛns.
Polyester film de yuz bɔku bɔku wan na ilɛktrik aplikeshɔn bikɔs fayn gred dɛn de gi dimɛnshɔnal stebiliti ɛn yusful dayelɛktrik pefɔmɛns.
Tipik aplikeshɔn dɛn kin inklud insuleshɔn kɔmpɔnɛnt fɔ motoka, transfɔma, kapasitɔ, kebul ɛn ilɛktronik asɛmbli.
Jɛnɛral pak-grɛd transparent BOPET nɔ fɔ ɔtomɛtik trit as aprɔv ilɛktrik-insuleshɔn gred. Ilɛktrik projɛkt dɛn fɔ spɛsifa di dayelɛktrik trɛnk we dɛn nid, tɛmal klas, tiknɛs, di standad dɛn we dɛn go yuz ɛn di kɔndishɔn dɛn we dɛn go yuz fɔ lɔng tɛm.
Polyester kin sav as stebul kyaria fɔ silikon ɔ ɔda rilis kɔtin dɛn we dɛn kin yuz na adhesive, kɔmpɔzit ɛn kɔnvɔyt industri. Rilis fɔs fɔ spɛsifa akɔdin to di fayn adhesive ɔ resin sistem.
BOPET kin yuz as dimɛnshɔnal stebul kyaria ɔ protɛktiv layt insay sɔm sɛlɛkɛt industrial prodak dɛm. Skrach rɛsistɛns ɛn sɔfays hadnɛs dipen pan di ɛksaktɔ gred ɔ kɔtin.
PET film kin sav as bak fɔ ay-pafɔmɛnshɔn adeziv tep dɛn we di film tik, sɔfayz tritmɛnt, adhesive kemistri ɛn fayn mɛkanikal prɔpati dɛn mit di prɔjek rikwaymɛnt dɛn.
| Film | Tipik Strɔng | Tipik Rol |
|---|---|---|
| BƆPƐT | Ay tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, stiffnɛs, print wɛb stebiliti ɛn tɛmal pefɔmɛns | Printin layt, lamineshɔn sabstret, insuleshɔn ɛn industrial kyaria |
| BOPP we dɛn kɔl BOPP | Lɔw density, gud mɔstɔ barɛri ɛn pak pefɔmɛns | Fleksibul pak ɛn lɛbl |
| CPP | Yusful silin prɔpati ɛn fleksibiliti | Inna silant layt ɛn spɛshal pak |
| PE | Fleksibul siling layt wit brayt pak yuz | Sialant ɛn insay wɛb insay laminat dɛn |
No universally 'best' fleksibul pak fim nɔ de. Matirial sɛlɛkshɔn fɔ bi bay di wok we ɛni layt de du na di kɔmplit paket.
Wan-sayd tritmɛnt kin yusful we na wan say nɔmɔ nid fɔ print, adhesive bonding, kɔt ɔ mɛtal.
Tu-sayd tritmɛnt kin fayn we ɔl tu di say dɛn fɔ intarakt wit ink, adeziv ɔ fɛnshɔnal kɔtin.
Rol wayndin dairekshɔn ɛn trit-sayd ɔriɛnteshɔn fɔ de insay di spɛsifikɛshɔn fɔ bay so dat di fim go go insay di kɔstɔma in printa, kota ɔ laminatɔ na di kɔrɛkt dairekshɔn.
BOPET na tin we dɛn kin yuz fɔ pak it, bɔt jenɛral-pɔpɔs transparent polyɛsta fim nɔ fɔ ɔtomɛtik diskrayb as apruv fɔ ɛvri dairekt-fud-kɔntakt aplikeshɔn.
Di wan dɛn we de bay fɔ no di kayn it, di kɔntakt kɔndishɔn, di tɛmpracha we dɛn de prosɛs, di las laminat strɔkchɔ ɛn di say we dɛn de go na di makit, dɔn dɛn fɔ aks fɔ di rayt dɔkyumentri fɔ di ɛksaktɔl fim gred.
BOPET na PET-based matirial, bɔt if wan finish prodakt na prɛktikal risaykul dipen pan di kɔmplit kɔnstrɔkshɔn ɛn di kɔlekɛshɔn ɛn risaykul infrastukchɔ we de.
Fɔ ɛgzampul, dɛn nɔ fɔ tɔk bɔt BOPET/adhesive/PE multilayer pouch we dɛn print se i kin risaykul jɔs bikɔs wan layt na PET. Ink, kɔtin, adeziv, mɛtalayzeshɔn, ɔda polima, layt tik ɛn lokal risaykul lɔ dɛn ɔl de inflɔws di risaykul we di pakej dɔn dɔn.
Standard klia BOPET nɔ fɔ ɔtomɛtik diskrayb as lɔng tɛm UV-stabilized film. Ɔda, solar-kɔntrol ɛn optik projɛkt dɛn fɔ spɛsifa wan aprɔpriet UV-stabiliz gred togɛda wit di kɔndishɔn dɛn we dɛn de ɛkspɛkt fɔ ɛksplɔz.
Anti-statik pefɔmɛns nid fɔ gɛt fayn fɔmyulashɔn ɔ kɔtin. Ilɛktronik ɛn dɔst-sɛnsitiv aplikeshɔn dɛn fɔ difayn di sɔfa-rɛsistɛns rɛnj we dɛn nid pas fɔ tek am se standad PET fim de gi ESD kɔntrol.
Anti-fog bihayvya na fכnshכnal sכfa prכpati bak εn i fכ spεsifa separet we kכndεnsεshכn kכntrכl impɔtant.
Ha-kwaliti BOPET film fɔ evalyu fɔ ɔl tu di matirial prɔpati ɛn rol-kɔnvɔyt kwaliti.
Tiknes profayl: chɛk nominal gej ɛn krɔs-wɛb yunifɔmiti.
Wid: verify slit-wid tolɛreshɔn.
Haz ɛn klia: impɔtant fɔ transparent pak ɛn optik yuz.
Glos: kɔnfɔm di we aw di sɔfa de luk usay i rili impɔtant.
MD/TD tɛnsiɛl prɔpati dɛn: chɛk agens di spɛsifikɛshɔn we dɛn dɔn gri fɔ.
MD/TD thermal shrinkage: evaluate na di spɛsifikɛd tɛst kɔndishɔn dɛn.
COF: kɔnfɔm di kwaliti dɛn we di mashin de handle.
Surface tension: verify trit-sayd pefɔmans bifo yu print ɔ lamination.
Difεkt dεm na di sכfa: inspεkt di jel dεm, skrach dεm, kכntaminεshכn εn optik mak dεm.
Rol edj dɛm: chɛk tɛliskɔp, edj damej ɛn wayndin alaynɛshɔn.
Winding tension: konfam se di rol nɔ gɛt bɔku wrinkles ɔ blok.
Splais: difayn kwantiti we dɛn alaw ɛn di we aw dɛn de no pɔsin.
Stet if dɛn go yuz di fim fɔ fleksibul pak, printin, lamineshɔn, lɛbl, katon winda, ilɛktrik insuleshɔn, rilis fim, mɛtalayz ɔ ɔda industrial prɔses.
Tiknɛs de inflɔws stiffness, yield, strength, handling ɛn kɔnvɔshɔn ikɔnomi. Spɛsifik nominal gej ɛn tolɛreshɔn ɛnitɛm we i de.
Fɔ ay-klariti aplikeshɔn, gi akseptabl haz, layt transmishɔn ɛn glos rikwaymɛnt.
Spɛsifik di fim we dɛn nɔ trit, we dɛn dɔn trit wit korona ɔ we dɛn dɔn trit wit kemikal ɛn tɔk if dɛn nid fɔ trit wan ɔ ɔl tu di say dɛn.
Identify gravure, flexographic, screen, UV ɔ ɔda printin sistem togɛda wit di ink saplay ɔ ink famili we i pɔsibul.
Gi di kɔmplit laminat, fɔ ɛgzampul BOPET/PE, BOPET/CPP ɔ ɔda strɔkchɔ, togɛda wit adhesive ɛn curing kɔndishɔn.
If baria impɔtant, gi target OTR ɛn WVTR di tɛmpracha, humiditi ɛn tɛst we dɛn nid.
Gi rol wit, kɔr dayamita, maksimal ɔdasay dayamita, rol lɔng ɔ wet, wayndin dairekshɔn ɛn trit-sayd ɔryenteshɔn.
Fɔ no klia wan se di ɔt-sil, anti-statik, anti-fɔg, UV, rilis, mɛtalayzin, lɔw-COF, ay-COF ɔ ɔda tin dɛn we yu nid fɔ du.
Evaluate di film pan di aktual printa, laminator, coater, slitter ɔ pak layn bifo yu kɔnfɔm kɔmɛshɔnal prodakshɔn.
Aplikeshɔn: pak, printin, laminɛshɔn, lɛbl, insuleshɔn, rilis, mɛtalayz ɔ ɔda yuz.
Tiknes: nominal maykron valyu ɛn tolɛreshɔn.
Rol wit: di slit wit we dɛn nid.
Kor: rikwayd kor intanɛnt dayamita.
Rol OD: maksimal akseptabl ɔdasay dayamita.
Rol lɔng ɔ wet: akɔdin to wetin di mashin nid.
Optik prɔpati dɛm: haz, transmittance ɛn gloss usay i rili impɔtant.
Surface treatment: we dɛn nɔ trit, korona ɔ kemikal tritmɛnt.
Di sayd dɛm we dɛn dɔn trit: wan sayd ɔ tu sayd dɛm.
Surface tension: di tritmɛnt lɛvɛl we dɛn nid.
COF: rikwayd mashin-hanlin rεnj if krichɔl.
Tεmכl shrinkεj: MD/TD rikwaymεnt εn tεst kכndishכn dεm.
Printin: di we aw dɛn kin print ɛn di kayn ink we dɛn kin print.
Lamination: adhesive ɛn kɔmplit laminat strɔkchɔ.
Barɛri: target OTR ɛn WVTR if nid de.
Speshal wok: ɔt sil, UV, anti-statik, anti-fɔg, mɛtalayz ɔ rilis kɔtin.
Kɔmplians: it-kɔntakt, ilɛktrik, industrial ɔ dɛstineshɔn-maket dɔkyumentri.
Kwantiti: sampul, trayal ɛn projɛkt kɔmɛshɔnal volyum.
Wallis de saplae transparent BOPET film fɔ pak manifakta, printa, laminatɔ, lɛbl kɔnvɔta, industrial film prɔsesɔ ɛn ɔda kɔmɛshɔnal yuza dɛn.
Fim fɔ pik rawnd di kɔstɔma in las printin, lamineshɔn, mɛtalayz, ilɛktrik ɔ pak prɔses instead fɔ trit ɛvri transparent BOPET gred as intachɛnjabl.
Di wan dɛn we de bay kin gi di tik we dɛn nid, di rol wit, di kɔr, di wayndin ɛn ɔda kɔnvɔyt paramita dɛn fɔ di prɔjek ɛvalueshɔn.
Korona tritmɛnt, printin adheshon, lamination ɛn ɔda surface rikwaymɛnt dɛn kin tɔk bɔt akɔdin to di prodakshɔn prɔses we dɛn want.
Sampul kwalifayeshɔn de alaw bayer fɔ kɔnfɔm hanlin, printin, lamination, optik kwaliti ɛn rol pefɔmɛns bifo dɛn apruv kɔmɛshɔnal kwantiti.
BOPET tinap fɔ biakshal ɔriɛnted polyethylene terephthalate. Na PET polyester film we dɛn strɛch insay ɔl tu di mashin ɛn transvas dairekshɔn.
BOPET na wan spεsifi k tכp PET film we dεn prodyuz tru biaxial כryenteshכn. Nɔto ɛvri PET sheet ɔ film na biaxial oriented.
I min se di PET film dɔn ɔriɛnt insay di mashin dairekshɔn ɛn transvas dairekshɔn. Dis na di difayn biaxial-oriɛnteshɔn prɔses we dɛn yuz fɔ mek BOPET.
Tipik yus dɛn inklud fleksibul pak, printin, laminɛshɔn, katon winda, lɛbl, ilɛktrik insuleshɔn, rilis fim, mɛtalayzin, tep ɛn industrial kyaria aplikeshɔn.
Yɛs. BOPET na wan we dɛn de yuz bɔku bɔku wan as strɔkchɔral ɛn printabl ɔda layt insay fleksibul pak laminat dɛn. Di kɔmplit pak strɔkchɔ fɔ stil disayn akɔdin to di siling, barɛri ɛn shelf-layf rikwaymɛnt.
Standart transparent BOPET de gi yusful gas ɛn aroma barɛri bɔt i nɔ fɔ ɔtomɛtik klas as ay-baria fim. Ay-baria aplikeshɔn kin nid spɛshal kɔtin, mɛtalayzeshɔn ɔ dipɔsit barɛri layers.
Standard plain BOPET nɔto fɔ se na fim we de sidɔm wit ɔt. Dairekt silin aplikeshɔn fɔ yuz wan spɛshal dizayn we dɛn mek wit ɔt-sial gred ɔ kɔmbayn BOPET wit wan kɔmpitabl silin layt lɛk PE ɔ CPP.
Yɛs. Korona tritmɛnt kin inkrisayz sɔfayz ɛnaji fɔ print, kɔt ɛn adhesive bonding. Di wan dɛn we de bay fɔ spɛsifa di tritmɛnt sayd ɛn di sɔfa-tɛnshɔn lɛvɛl we dɛn nid.
Yɛs. Dɛn kin yuz BOPET we dɛn dɔn trit fayn fayn wan fɔ gravu, fleksografik ɛn ɔda printin sistem dɛn. Di film tritmεnt, ink sistεm εn di laminεshכn prכsεs we de afta dat fכ tεst tכgeda.
Yɛs. BOPET na tin we dɛn kin yuz fɔ dray lamination. Adhesive selekshɔn, surface tritmɛnt, curing ɛn di sɛkɔn wɛb fɔ kwalifay as kɔmplit strɔkchɔ.
Suitabl metalizable BOPET gred kin gɛt wan dipɔsit mɛtal layt fɔ modify barɛri, apinans ɛn optik prɔpati.
BOPET na polyester-based ɛn dɛn kin pik am bɔku tɛm fɔ trɛnk, stiffness, dimɛnshɔnal stebiliti ɛn thermal pefɔmɛns. BOPP na polypropylene-based ɛn i kin gi advantej lɛk lɔwa density ɛn strɔng mɔstɔ-baria pefɔmɛns. Faynal selekshɔn dipen pan di pakej strɔkchɔ.
COF min kɔfishin fɔ frikshɔn. I de inflɔws aw di fim de slayv akɔdin to insɛf ɛn di mashin kɔmpɔnɛnt dɛn we dɛn de prosɛs am wit ay spid.
If yu shrinkage pasmak we yu de du ɔt prɔses kin mek mistek pan rɛjista, wrinkles ɛn dimɛnshɔnal chenj. So dɛn fɔ evalyu shrinkage ɔnda kɔndishɔn dɛn we gɛt fɔ du wit di kɔstɔma in prɔses.
BOPET na tin we dɛn kin yuz bɔku bɔku wan fɔ mek it-pak strɔkchɔ, bɔt di wan dɛn we de bay fɔ kɔnfɔm di rigyuletɔri dɔkyumentri fɔ di ɛksaktɔl fim gred, kɔtin, ink, adhesive strɔkchɔ ɛn di makit we dɛn want.
BOPET na PET-based, bɔt prɛktikal risaykulbiliti dipen pan di kɔmplit finish strɔkchɔ ɛn lokal risaykul infrastukchɔ. Multimaterial laminates nɔ fɔ ɔtomɛtik diskrayb as risaykul.
Lɔng tɛm UV pefɔmɛns na gred spɛsifi k. UV-sɛnsitiv ɔda ɔ optik projɛkt dɛn fɔ aks fɔ wan dediket UV-stabilized polyester film.
Nɔto fɔ se na so i bi. Anti-statik ɔ ESD aplikeshɔn dɛn nid fɔ gɛt fayn funkshɔn gred ɔ kɔtin ɛn wan difayn ilɛktrik-rɛsistɛns spɛsifikɛshɔn.
Gi aplikeshɔn, tik, wit, kɔr, rol OD, tritmɛnt, optik rikwaymɛnt, COF, shrinkage, printin ɔ laminɛshɔn prɔses, barɛri target, spɛshal fɛnshɔn, kwantiti ɛn dɛstineshɔn.
Yɛs. Prodakshɔn trayal kin kɔnfɔm printin adheshon, lamination bonding, wɛb handlin, COF, optik kwaliti, shrinkage ɛn rol pefɔmɛns ɔnda di bayer in aktual prɔsesin kɔndishɔn.
Transparent BOPET na ay-pafɔmɛnshɔn polyɛsta sabstret bikɔs biaxial ɔryenteshɔn de gi wan ifektiv balans fɔ trɛnk, dimɛnshɔnal stebiliti, klia ɛn kɔnvɔyt pefɔmɛns.
Bɔt pɔshɔnal fim sɛlɛkshɔn fɔ go bifo di wɔd 'tu-way strɛch BOPET.' Di wan dɛn we de bay fɔ difayn if di prɔjek nid fɔ gɛt plein, korona-trit, kemikal trit, ɔt-sial, mɛtal, ay-baria, UV-stabiliz, anti-statik ɔ ɔda spɛshal BOPET gred.
Send Wallis yu tiknes, wit, rol konfigyushɔn, sɔfayz tritmɛnt, printin ɔ lamineshɔn prɔses, target optik prɔpati ɛn ɛnd-yuz rikwaymɛnt fɔ tɔk bɔt wan aprɔpriet transparent BOPET film sɔlvishɔn.
