|
kaɖi dzi nyatakakawo
Wallis ye nye esia
| Amadede: | |
|---|---|
| Nusi wotsɔ wɔe: | |
| viɖe: | |
| Agbɔsɔsɔ: | |
Wallis holographic PVC dziŋgɔli ƒe nutsyɔnu film nye atsyɔ̃ɖoɖo kple ametakpɔnu kaɖi-lamination nusi me kɔ si wowɔ na plastic kaɖi wɔlawo bibiwo. Nusi wotsɔ tsyɔ edzi la tsɔa dziŋgɔli alo diffractive ƒe nɔnɔme si nɔa te ɖe dzogoe dzi kpena ɖe eŋu esime wòɖea mɔ na nɔnɔmetata siwo wota, nuŋɔŋlɔ, fotowo, barcode kple kaɖi ŋuti nyatakaka bubuwo be woanɔ dzedzem.
Woate ŋu ana nuawo kple dziŋgɔli ƒe nɔnɔme siwo sɔ alo dɔa koŋ ƒe optical designs na hamevinyenye ƒe agbalẽviwo, nunana gbalẽviwo, VIP gbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo, mɔɖeɖegbalẽviwo, dzesidegbalẽviwo, gadzraɖoƒe ƒe kaɖi ƒe dɔwo kple PVC kaɖi ƒe dɔ bubu siwo wotsɔ laminated. Woate ŋu aƒo nu tso titrime, agbalẽ ƒe lolome, kpɔɖeŋu ƒe mɔfiame, nukpɔkpɔ le gaglãgbe, nutsyɔnu ƒe grade, packing kple ame ŋutɔ ƒe dzeside ŋu na OEM wɔwɔ.
Adzɔnuwo ƒe vovototodedeameme vevi: axa sia ƒo nu tso agbalẽ-nɔnɔme PVC nutsyɔnu na kaɖi lamination si dzi wokpɔna ŋu. Desktop card-printer overlaminates, pressure-sensitive cold-lamination films, hot-stamping foils kple rigid holographic PVC core sheets nye nu vovovowo eye mele be woabu wo be woate ŋu atrɔ wo nɔewo o.
| Parameter | B2B ƒe nɔnɔme | Nuƒlela ƒe kpeɖodzi |
|---|---|---|
| Adzɔnu Ƒomevi | Holographic PVC kaɖi si wotsɔ tsyɔ film si me kɔ alo esi me kɔ afã kple afã | Ðo kpe agbalẽ ƒe nɔnɔme ƒe dzoxɔxɔ-lamination overlay dzi tsɔ wu agbalẽtamɔ̃ ƒe lãgbalẽ, nyaƒoɖeamenu-sensitive film alo dzoxɔxɔ-stamping foil. |
| Nusiwo Wozãna le Gɔmeɖoanyi | PVC overlay grade na PVC kaɖi xɔtuɖoɖo siwo sɔ | Nu bubu siwo wotsɔ wɔa kaɖi ƒe ŋutilã la hiã be wobla wo eye woado wo kpɔ le kaɖi si wowu enu me hafi woada asi ɖe wo dzi. |
| Fifia ƒe Titrime ƒe didime | Anɔ abe 0.04–0.10mm le adzɔnuwo ŋuti nyatakaka siwo wona nu; tiatia siwo wowɔ ɖe ɖoɖo nu ne woɖo kpe edzi | Tsɔ ŋgɔgbe kple megbe ƒe nutsyɔnu ɖesiaɖe ƒe titrime kple taɖodzinu si wowu enu-kaɖi ƒe titrime. |
| Agbalẽvi ƒe Agbɔsɔsɔme | Kekeme kple didime si wowɔ ɖe ɖoɖo nu; woate ŋu ada agbalẽvi wɔwɔ ƒe ɖoɖo siwo bɔ la kpɔ | Na press ƒe lolome, printed-core ƒe lolome, card matrix, trim margin kple nuɖuɖu ƒe mɔfiame. |
| Nukpɔkpɔ ƒe Ŋusẽkpɔɖeamedzi | Dziŋgɔli, dometsotso, ɣletivi, fli, geometri, kekeli-klẽ, dzesi alo dɔa koŋ ƒe holographic kpɔɖeŋu | Da asi ɖe ŋutilã me ŋusẽkpɔɖeamedzi ƒe kpɔɖeŋu dzi elabena dzedzeme trɔna ne akaɖi, substrate ƒe amadede kple nukpɔkpɔ ƒe dzogoe. |
| Nuwɔwɔ le gaglãgbe | Nusi me kɔ alo esi me kɔ afã kple afã, le kpɔɖeŋu ƒe kpekpeme kple xɔtutu nu | Ðe fotowo, nuŋɔŋlɔ nyuiwo, QR-kɔdawo, fliwo kple dedienɔnɔ ƒe agbalẽtata ƒe dzedzeme si dzi woda asi ɖo la gɔme. |
| Anyigbadzi Nuwuwu | Holographic si le keklẽm; bubu siwo wowu enu siwo ŋu woate ŋu ada dɔa kpɔ le | Kpɔ gloss, haze, texture kple scratch ƒe nudidiwo dzi le laminated card mamlɛtɔ dzi. |
| Lamination | Wotrɔ asi le eŋu na kaɖi dzodzoe-lamination dɔwɔwɔ siwo sɔ kple nutsyɔnu, ink kple nu vevi agbalẽ siwo sɔ | Ele be woaɖo kpe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi, fafa kple nuƒoƒoƒu ƒe nɔnɔmewo dzi le nuƒlela ƒe dɔwɔnuwo dzi. |
| Agbalẽtata | Zi geɖe la, wowɔa laminated ɖe kaɖi ƒe nuto si wota dzi; agbalẽtata tẽ bia be woatsɔ dzesi si sɔ si ŋu wowɔ atike ɖo alo atsyɔ edzi | De dzesi ink system, agbalẽtata ƒe akpa, curing mɔnu kple nenye be woata nusi wotsɔ blae la ŋutɔ. |
| Trɔ asi le eŋu | Kpɔɖeŋu, dzesidenu, nuŋɔŋlɔ, mɔfiame, lolome, nutsyɔtsyɔ, babla kple dzeside | Dedienɔnɔ ŋuti nutata siwo wowɔ ɖe ɖoɖo nu ate ŋu abia be woakpɔ gɔmedzedze, kpeɖodzi, ŋkɔ ŋɔŋlɔ ƒe dzidzenuwo kple agbɔsɔsɔ suetɔ kekeake siwo ku ɖe dɔa koŋ ŋu. |
Ele be woaɖo kpe asixɔxɔ mamlɛawo katã dzi—siwo dometɔ aɖewoe nye titrime ƒe mɔɖeɖe ɖe nu ŋu, agbalẽ ƒe mɔɖeɖe ɖe nu ŋu, nukpɔkpɔ ƒe kpekpeme, afu, nutsyɔnu ƒe ŋusẽ, lamination fesre, peel ƒe dɔwɔwɔ, kpɔɖeŋu ƒe ŋkɔ ŋɔŋlɔ kple nudɔdɔ ƒe agbɔsɔsɔme—le nɔnɔme si dzi woda asi ɖo, nyayɔyɔ kple ŋutilã ƒe kpɔɖeŋu me.
Holographic PVC kaɖi ƒe nutsyɔnu nye ƒuƒoƒo tsɛ aɖe si me kɔ si woda ɖe kaɖi ƒe nuto si wota tame alo ete le lamination dzodzoe me. Nusi wotsɔ blae la kpena ɖe eŋu wòwɔa gotagome kaɖia ƒe anyime esime wòtsɔa nukpɔkpɔ ƒe nɔnɔme si to vovo si naa dziŋgɔli ƒe amadede siwo trɔna le akaɖi kple nukpɔkpɔ ƒe dzogoe vovovowo te.
Le kaɖi ƒe wɔwɔme si dze me la, nusi wotsɔ tsyɔa nu dzi ate ŋu aƒo dɔ etɔ̃ nu ƒu: nyatakaka siwo wota takpɔkpɔ tso wo ŋudɔwɔwɔ edziedzi me, kpekpeɖeŋu nana kadodo si le kaɖi ƒe ƒuƒoƒo dome, kple atsyɔ̃ɖoɖo alo kpeɖodzinu si woate ŋu akpɔ akpe ɖe eŋu. Dɔwɔwɔ nɔ te ɖe kaɖia tutu bliboa dzi tsɔ wu be wòanɔ te ɖe nusi wotsɔ blae dzi ɖeɖeko dzi.
| Layer | Typical Dɔwɔwɔ | Vevietɔ Dzesidede |
|---|---|---|
| Ŋgɔgbe Holographic ƒe Nutsyɔnu | Optical ŋusẽkpɔɖeamedzi, tata-nɔnɔmetata takpɔkpɔ kple anyigba ƒe nuwuwu | Kpɔɖeŋu ƒe mɔfiame, nukpɔkpɔ le gaglãgbe, nutsyɔnu ƒe akpa kple nɔnɔme ɖoɖo |
| Wota Ŋgɔgbe Nu vevi | Nutata, ame ŋutɔ ƒe nɔnɔme ƒe megbenyawo, nuŋɔŋlɔ kple adzɔnu ƒe amadedewo | Ink ƒe dɔyɔyɔ, ink ƒe nutsyɔtsyɔ bliboa kple kadodo ƒe ɖekawɔwɔ |
| Titina Nu vevi alo RFID Prelam | Kpekpeɖeŋugbalẽvi ƒe titrime, sesẽme, chip kple antenna ƒe wɔwɔme le afisi wòsɔ le | Layer ƒe titrime, antenna ƒe ʋuʋu, chip ƒe nɔƒe kple lamination ƒe nyaƒoɖeamenu |
| Wota Back Core si wota | Trɔ megbe nɔnɔmetatawo, mɔfiamewo, asidede agbalẽ te alo magnet-stripe megbe | Ŋkɔ ŋɔŋlɔ, ink ƒe sɔsɔ kple dɔwɔwɔ-nutome ƒe ʋuʋu |
| Megbe ƒe Nutsyɔnu | Ametakpɔnu le megbekpa dzi; ate ŋu anye nusi me kɔ, holographic alo magnetic-stripe ƒe nutsyɔnu | Titrime dadasɔ, fli ƒe nɔnɔme, nutsyɔnu kple mamlɛtɔ gbadzaa |
Zi geɖe la, holographic overlay nyea gotagome ƒuƒoƒo tsɛ aɖe si me kɔ. Holographic PVC core sheet lolo wu eye wòwɔa dɔ abe xɔtuɖaŋu alo atsyɔ̃ɖoɖo ƒe kaɖi-ŋutilã ƒe ƒuƒoƒo ene. Tiatia si mesɔ o ate ŋu atrɔ titrime mamlɛtɔ, tata ƒe opacity, lamination nuwɔna kple punching ƒe nyonyome.
Wotrɔ asi le roll-form overlaminates siwo wozãna le desktop card printers me ŋu na agbalẽtamɔ̃ kple laminator ƒe nɔnɔme tɔxɛwo. Mele be woasusui be PVC-kplu si le abe agbalẽ ene ƒe nutsyɔnu si wotsɔ tsyɔa dɔwɔƒewo ƒe hot-press card wɔwɔ dzi be esɔ na mɔ̃ mawo o.
| Overlay Tiatia | Nukpɔkpɔ alo Dedienɔnɔ Taɖodzinu | Best-Fit Card Projects | Approval Focus |
|---|---|---|---|
| Dziŋgɔli ƒe Kpɔɖeŋu si me kɔ | Etsɔa amadede ƒe vovototo si nɔa te ɖe dzogoe dzi kpena ɖe eŋu esime wònana agbalẽtata si le ete la dzena | Hamevinyenye, nunana, amedzrodzeƒe, mɔɖeɖe kple boblododo gbalẽviwo | Nukpɔkpɔ le gaglãgbe le fotowo, nuŋɔŋlɔwo kple barcodewo dzi |
| Standard Gbugbɔgagblɔ ƒe Kpɔɖeŋu | Ezãa ɣletiviwo, dometsotsowo, fliwo, ƒutsotsoewo alo geometric motifs hena atsyɔ̃ɖoɖo si mewɔa tɔtrɔ o | Asitsatsa ƒe kaɖi ƒe ɖoɖo siwo ƒe agbɔsɔsɔme sɔ gbɔ ŋutɔ | Kpɔɖeŋu gbugbɔgagblɔ, mɔfiame, seam kple kaɖi-ɖe-kaɖi ƒe ɖekawɔwɔ |
| Logo alo Nuŋɔŋlɔ ƒe Kpɔɖeŋu si Wotrɔ Asi Le | Etsɔa adzɔnu ƒe dzesi, dɔwɔƒe ƒe ŋkɔ alo dɔa koŋ ƒe nukpɔkpɔ ƒe akpa aɖe ƒoa ƒui | Adzɔnu ƒe ŋkɔ ƒe ɖoɖowo, premium cards kple controlled-issu projects | Nutata ƒe aƒetɔ nyenye, dzɔtsoƒe ƒe kpeɖodzi, dzesidenu ƒe dzidzenu kple ŋkɔ ŋɔŋlɔ |
| Fine-Line alo Microtext Nukpɔsusu | Ate ŋu ana nukpɔkpɔ ƒe kpeɖodzi si me kɔ wu ne wodo alɔe to ewɔwɔ ƒe ɖoɖo si nètia me | Dzesidede ame kple dedienɔnɔ ƒe ɖoɖo siwo de ŋgɔ wu | Feature resolution, readability, ɖaseɖiɖi mɔnu kple aƒetɔ si dzi woda asi ɖo |
| Holographic Area ƒe akpa aɖe alo esi woŋlɔ ŋkɔ na | Da ŋusẽkpɔɖeamedzia ɖe teƒe aɖe si woɖe fia tsɔ wu be wòadae ɖe agbalẽvi bliboa dzi | Kpekpeɖeŋugbalẽvi siwo dzi nɔnɔmetatawo, fesrewo, chips, asidede agbalẽ te alo adzɔnu ƒe dzeside ƒe teƒe siwo dzi wokpɔna | X/Y ŋkɔ ŋɔŋlɔ ƒe mɔɖeɖe, kaɖi matrix kple punching alignment |
| Atsyɔ̃ɖoɖo Dense Ŋusẽkpɔɖeamedzi | Enaa nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi sesẽ wu gake ate ŋu aɖe atsyã si wota la ƒe dzedzeme dzi akpɔtɔ | VIP, atsyɔ̃ɖoɖo, modzakaɖeɖe kple nunana gbalẽviwo | Opacity, white-underprint strategy kple nutata ƒe vovototo |
Holographic ƒe ɖoɖo si wozãna ɖaa ate ŋu ana nukpɔkpɔ ƒe vovototodedeameme nanyo ɖe edzi, gake mele be woaɖee afia be enye ɖoɖo blibo si tsi tre ɖe aʋatsokaka ŋu le eɖokui si o. Ele be dɔ siwo me dedienɔnɔ de ŋgɔ wu naɖe kpeɖodzinana ƒe nɔnɔmewo, nutata siwo dzi wokpɔna, asiɖeɖe le wo ŋu dzi kpɔkpɔ kple ɖaseɖigbalẽ-dedienɔnɔ ƒe xɔtuɖaŋu bliboa gɔme.
| Process | Material Format | Alesi Wowɔa Dɔe | Seɖoƒe Vevietɔ |
|---|---|---|---|
| Dɔwɔƒewo ƒe Hot-Press Card Lamination | PVC ƒe nutsyɔnu si le abe agbalẽ ene | Dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi kple fafa si dzi wokpɔna blaa kaɖi ƒe ƒuƒoƒoawo katã | Ebia be woawɔ ɖeka kple core, ink, coating kple lamination parameters |
| Nyaƒoɖeamenu-Sensitive Vuvɔ Lamination | Film si léna ɖe eɖokui ŋu | Nusiwo wotsɔna léa nu ɖe nu ŋu siwo sea nyaƒoɖeamenu ƒe kadodo siwo me kaɖi ƒe dzoxɔxɔ-nyaƒoɖeamenu ƒe tsatsam mele o | Esia nye nusi wotsɔ léa nu ɖe nu ŋu si to vovo eye menye nusi wozãna ɖaa si ŋu woƒo nu tsoe le afisia o |
| Hot Stamping (Atsitrenu Dzodzoe). | Tsɔ agbalẽvi si wotsɔna tsɔa agbalẽvi la de nusi wotsɔna tsɔa nu dzi | Dzoxɔxɔ kple nyaƒoɖeamenu tsɔa holographic teƒe tiatia aɖewo yia kaɖia ƒe anyime | Menye ametakpɔnu blibo si wotsɔ tsyɔa nu dzi o; tooling kple transfer ƒe nɔnɔmewo to vovo |
| Desktop Printer ƒe Nutsyɔtsyɔ | Kpɔɖeŋu-koŋ ƒe agbalẽ xatsaxatsa laminate alo patch laminate | Wotsɔa kaɖi-tamɔ̃ ƒe laminator si wotsɔ wɔ ɖekae alo esi le egodo zãnɛ | Ele be wòasɔ kple agbalẽtamɔ̃ ƒe kpɔɖeŋu, patch geometry, sensor dzesiwo kple roll core |
Dzoxɔxɔ si gbɔ eme alo ɣeyiɣi si woatsɔ anɔ anyi ate ŋu atrɔ asi le nukpɔkpɔ ƒe nɔnɔme ŋu, ana aŋɔ nado, ana agbalẽa natsi alo ana kaɖia natsi dzodzodzoe. Dzoxɔxɔ, nyaƒoɖeamenu alo nusi wotsɔ blae ƒe ɖekawɔwɔ si mesɔ o ateŋu ahe kuɖɔ, nugbɔ kɔkɔ alo delamination vɛ. Ele be woaɖo fesre nyuitɔ to nusi wota ŋutɔŋutɔ, nusi wotsɔ blae ƒe titrime, agbalẽtamɔ̃, mama ƒe agbalẽviwo kple fafa ƒe tsatsam zazã me.
Le kaɖi ƒe wɔwɔme akpa gãtɔ gome la, wotaa nutatawo ɖe kaɖia ƒe nuto dzi eye wotsɔa holographic ƒe nutsyɔnu la ƒoa xlãe. Ne wowɔ anyigba si wona la eye wodoe kpɔ na nuŋlɔtsi ƒe ɖoɖo si sɔ ko hafi wòle be woagblɔ agbalẽtata tẽ ɖe nusi wotsɔ blae dzi.
| Nuwɔwɔ ƒe Mɔnu | si Wokafu Dadakpɔ | Afɔku si bɔ |
|---|---|---|
| Offset-Ta Core + Overlay | Kpɔ oxidative alo UV ink ƒe dɔyɔyɔ, ink ƒe nutsyɔtsyɔ, coating grade kple peel ƒe ŋusẽ le lamination megbe | Kadodo nyuie le nuŋlɔtsi kpekpewo ƒe nutsyɔnu alo nuŋlɔtsi si meda dɔ nyuie o dzi |
| Seda-Screen-Ta Core + Overlay | Kpɔ ink ƒe titrime, solvent ƒe dodo, eƒe anyigba ƒe gbadzaƒe kple eƒe nugbɔ ƒe kadodo ɖa | Ink ƒe tsi siwo wodo ɖe dzi, atike si wotsɔ xea mɔ na alo nutoa me ƒe kuɖɔwo |
| UV Digital-Printed Core + Nutsyɔtsyɔ | Kpɔ egbɔ be ink si woda gbe le ƒe atikewɔwɔ kple alesi wòlé ɖe nutsyɔnu si wotia si wofa ɖe nu ŋu la ŋu | Delamination afisi ink kple overlay coating mewɔ ɖeka o |
| Agbalẽtata Tsã le Overlay dzi | Zã dɔa koŋ ƒe dzeside si woate ŋu ata eye nàdo anyigba ƒe ŋusẽ, ink ƒe adhesion kple curing kpɔ | Ink ƒe ƒoƒo ɖe nu ŋu gbɔdzɔ, eƒe ʋuʋu alo nukpɔkpɔ ƒe tɔtɔ |
| Barcode, QR Code kple Nuŋɔŋlɔ Nyuiwo | Scan eye nàlé ŋku ɖe eŋu le lamination mamlɛtɔ megbe le akaɖi ƒe dzogoe geɖe te | Holographic ƒe ŋusẽkpɔɖeamedzi siwo le ʋeʋẽm ate ŋu aɖe vovototo alo scanner ƒe nuxexlẽ dzi akpɔtɔ |
Dziŋgɔli ƒe nutsyɔnu si me kɔ ate ŋu ana vovototo si wokpɔna nadzi ɖe edzi eye wòakpɔ adzɔnu ƒe dzesidenu ƒe nɔnɔmetata siwo wota ta le agbalẽvi siwo nudzralawo, habɔbɔwo, modzakaɖeƒewo, kamedefefewɔƒewo, nuɖuɖudzraƒewo kple hamevinyenye ƒe ɖoɖo nyuitɔwo zãna dzi.
Holographic effects ateŋu ado alɔ ɣeyiɣi ƒe dɔdzikpɔdɔwo, tata siwo seɖoƒe li na kple boblododo ƒe nutata siwo kpɔa ŋusẽ gã aɖe ɖe ame dzi. Ele be nuƒlelawo naɖo kpe barcode ƒe xexlẽ, nuŋɔŋlɔ ƒe dɔwɔwɔ kple packaging-line ƒe ɖekawɔwɔ dzi le kaɖi si wowɔ vɔ la dzi.
Woate ŋu atsɔ nusi wotsɔ blae la awɔ ɖeka kple magnet-stripe, RFID alo contactless card structures siwo sɔ. Ele be nɔnɔmetatawo ɖoɖo naƒo asa na nusiwo doa kplamatse teƒe siwo wowɔa dɔ le, eye ele be woado kaɖi bliboa kpɔ le gaxɔ alo nuxlẽla ƒe ɖoɖo si woɖo be woawɔ la me.
Nukpɔkpɔ ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu ate ŋu ana kpeɖodzinya si woate ŋu akpɔ. Ele be dziɖuɖu, ganyawo kple dedienɔnɔ gã ƒe dɔwɔnawo naɖe dzidzenu siwo hiã, dedienɔnɔ ƒe ɖoɖo, nutatawo dzi kpɔkpɔ, wo yometiti kple woƒe kpeɖodzinana ƒe ɖoɖo me tsɔ wu be woaɖo ŋu ɖe dziŋgɔli ƒe ŋusẽkpɔɖeamedzi si bɔ ŋu.
Le fexexe alo dɔwɔƒe eve ƒe dɔwo gome la, ele be woada nusi wotsɔ blae la kpɔ abe kaɖi tutu blibo si dzi woda asi ɖo ƒe akpa aɖe ene. Ele be woabu chip-module milling, antenna ƒe nɔƒe, magnetic stripe, signature panel, embossing, ame ŋutɔ ƒe tɔtrɔ kple ɖoɖowɔɖia ƒe nudidi siwo sɔ la katã ŋu.
| Inspection Nu | Nusi Woalé ŋku ɖe | Afɔɖeɖe si Wokafu |
|---|---|---|
| Eƒe Titrime Kple Agbalẽvi ƒe Agbɔsɔsɔme | Mamã dedie ƒe titrime, atitsoga-gbadzɛ ƒe ɖekawɔwɔ, didime, kekeme, dzogoe ene me kple nugbɔ ƒe nyonyome | Incoming inspection kple batch ƒe asiɖeɖe le eŋu |
| Nuwɔwɔ le gaglãgbe kple Haze | Nɔnɔmetatawo, nuŋɔŋlɔwo, nɔnɔmetatawo kple nusiwo woate ŋu axlẽ le mɔ̃ dzi ƒe dzedzeme le lamination megbe | Kpɔɖeŋu ƒe mɔɖeɖe kple ŋkuléle ɖe agbalẽvi si wowu enu ŋu |
| Kpɔɖeŋu ƒe Dzedzeme | Amadede ƒe tɔtrɔ, keklẽ, kpɔɖeŋu ƒe kpekpeme, gbugbɔgagblɔ ƒe ɖekawɔwɔ, gbɔdzɔgbɔdzɔwo kple ɖiƒoƒo | Dzodzro si va le akaɖi si woɖe fia te |
| Kpɔɖeŋu Mɔfiame Kple Ŋkɔ ŋɔŋlɔ | Longitudinal/transverse orientation, X/Y nɔnɔme kple ɖoɖowɔwɔ ɖe kaɖi lãɖeɖe ƒe ɖoɖo nu | Nutata ƒe kpeɖodzi, dodokpɔ gbalẽvi kple ewɔwɔ ƒe gɔmedzedze |
| Coating Axa kple Bonding | Nusiwo wotsɔ blaa nu ƒe nɔnɔme nyuitɔ, lãgbalẽ ƒe nuwɔna, nugbɔ ƒe kadodo, kuɖɔwo kple delamination | Lamination dodokpɔ kple tsitsi ƒe dodokpɔ |
| Anyigba ƒe Nyonyome | Ʋuʋudedi, ʋuʋudedi, mɔxexe, ke, keklẽ ƒe tɔtrɔ kple asiléle ƒe dzesiwo | Dzodzro si va kple mamlɛtɔ |
| Finished-Card Geometry ƒe nɔnɔmetata | Total titrime, gbadzaa, warpage, nugbɔ nɔnɔme kple punching nyonyome | Le lamination, fafa kple kaɖi punching megbe |
| Dɔwɔwɔ ƒe Ðekawɔwɔ | Barcode / QR scanning, magnetic-stripe encoding, RFID nuxexlẽ, chip-module dɔwɔwɔ kple ame ŋutɔ ƒe tɔtrɔ | Dɔwɔnu ŋutɔŋutɔwo zazã atsɔ awɔ dodokpɔ |
Kpe ɖe kaɖia ƒe wɔwɔme, eƒe titrime si wowu enu, nutsyɔnu ƒe nɔƒe kple dɔwɔwɔ ƒe teƒewo dzi.
Tia kpɔɖeŋu si sɔ alo da asi ɖe nutata kple mɔfiame si wowɔ ɖe ɖoɖo nu dzi.
Wɔ nu ƒe kpɔɖeŋu to titrime, nutsyɔnu kple agbalẽ ƒe ɖoɖo si wodo ɖa la zazã me.
Ta kaɖia ƒe nu vevi ŋutɔŋutɔ kple nuwɔwɔ ƒe ink kple ink ƒe nutsyɔnu si sɔ.
Laminate, fafɛ kple punch cards zã dɔwɔnu kple ɖoɖo si nuƒlelaa ɖo be yeazã.
Kpɔ dzedzeme, peel ƒe ŋusẽ, bubbles, warpage, scanning kple dɔwɔwɔ ƒe dɔwɔwɔ ɖa.
Da asi ɖe Sika Kpɔɖeŋu ŋutɔŋutɔ si wode asi ete dzi eye nàlée ɖe asi abe nukpɔkpɔ kple dɔwɔwɔ ƒe mɔfiame ene na nuwɔwɔ le agbɔsɔsɔ gã me.
| Nyatakakawo | Tsitotsito Be Woana |
|---|---|
| Kpekpeɖeŋugbalẽvi ƒe Dɔbiagbalẽvi | Hamevinyenye, nunana, amedzrodzeƒe, mɔɖeɖe, ID, gadzraɖoƒe-si ku ɖe, RFID/NFC alo kaɖi ƒomevi bubu |
| Kpekpeɖeŋugbalẽviwo Xɔtu | Ŋgɔgbe nutsyɔnu, nu vevi siwo wota, titina nu vevi alo nutsyɔnu, megbe nutsyɔnu kple taɖodzinu si wowu enu ƒe titrime |
| Nudidi si Wotsɔ Ƒo Nu Ðe Nu Ŋu | Titrime, agbalẽa ƒe lolome, nusi wotsɔ blae ƒe grade, nusiwo me kɔ, keklẽ kple ŋgɔgbe/megbe zazã |
| Holographic ƒe Ŋusẽkpɔɖeamedzi | Dziŋgɔli si wozãna ɖaa, ɣletivi, dometsotso, grid, geometric, logo, nuŋɔŋlɔ, akpa aɖe ƒe nɔnɔme alo nuŋlɔɖi ƒe nɔnɔme |
| Nɔnɔme | Kpekpeɖeŋugbalẽvi ƒe matriki, kpɔɖeŋu ƒe mɔfiame, gbugbɔgagblɔ ƒe didime, X/Y ƒe ŋkɔ ŋɔŋlɔ kple dɔwɔwɔ-nutome si me kɔ |
| Agbalẽtata ƒe Dɔwɔna | Offset, UV offset, seda screen, UV dijitaal alo ɖoɖo bubu; de dzesi amesi naa ink kple atikewɔwɔ ƒe mɔnu le afisi wòanya wɔ le |
| Lamination Dɔwɔnuwo | Press model, plate ƒomevi, dzoxɔxɔ si sɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi kple fafa mɔnu |
| Nudidi Siwo Ku Ðe Dzedzeme Ŋu | Nukpɔkpɔ le gaglãgbe, haze, peel, scratch, card flatness, scanning, RFID, magnetic stripe alo lɔlɔ̃ ɖe edzi ƒe dzidzenu bubuwo |
| Asitsatsa Ŋuti Nyatakakawo | Kpɔɖeŋu agbɔsɔsɔme, nudɔdɔ ƒe agbɔsɔsɔme si wobu, nubablɛwo, ŋkɔwo, teƒe si woayi kple nuŋlɔɖi siwo wobia |
Ele be woakpɔ holographic overlay sheets ta tso ke, ŋeŋe, tsidzadza, nugbɔ ƒe ƒoƒo kple dzoxɔxɔ si dzi womeɖu o me le wo dzadzraɖo kple dukɔwo dome ʋuɖoɖo me. Nubablɛ ate ŋu anye ametakpɔnu film, tsi-tsitretsitsi ƒe babla, kakɛwo, pallets, dzogoe takpɔkpɔ kple dzesidenu siwo wowɔ ɖe ɖoɖo nu le nɔnɔme si ŋu woɖo kpee nu.
Na woade dzesi nusi wotsɔ blae ƒe akpa kple nɔnɔmetata ƒe mɔfiame nyuie.
Dzra agbalẽawo ɖo gbadzaa le nubablɛ gbãtɔa me eye nàƒo asa na agba kpekpe siwo mesɔ o.
Na nusiwo wotsɔ wɔe la natrɔ ɖe nɔnɔme si me wowɔa nu le ŋu hafi nàʋui.
Zã asigɛ dzadzɛwo kple asiléle si dzi ke le na anyigba siwo ƒe nyonyome le abe ŋkume ene.
Ðo kpe ɣeyiɣi si me woadzrae ɖo kple nɔnɔmeawo dzi le mɔ̃ɖaŋu ŋuti nuŋlɔɖi mamlɛtɔ me.
Wallis doa alɔ kaɖi wɔlawo, dedienɔnɔ agbalẽtamɔ̃wo, plastic-kaɖi trɔlawo, mamalawo kple OEM ɖoɖowo kple holographic overlay nu tiatia, ŋutilã me kpɔɖeŋuwo, customized kpɔɖeŋu ŋgɔyiyi, agbalẽ ƒe tɔtrɔ, export packing kple do ƒome kplii card-nu sourcing.
Standard kple custom holographic ŋusẽkpɔɖeamedzi tiatia.
Trɔ asi le nutsyɔnu ƒe titrime, lolome, kpɔɖeŋu mɔfiame, nutsyɔtsyɔ kple nubablɛwo.
Kpɔɖeŋu kpekpeɖeŋu na agbalẽtata, lamination, punching kple finished-card dodokpɔ.
PVC ƒe nuto si do ƒome kplii, agbalẽ si woate ŋu ata, magnet-stripe overlay kple RFID inlay nuawo.
B2B kadodo si wotu ɖe nɔnɔmetatawo, nɔnɔmewo, kpɔɖeŋu siwo dzi woda asi ɖo kple batch ƒe nudidiwo dzi.
Wolé asisiwo ƒe nyaŋuɖoɖo ƒe nɔnɔmetata gbãtɔ si gbɔna la ɖe asi tso axa si wona la me.
Wotsɔa aŋe-kaɖi ƒe nuto si wota la ƒoa xlãe be wòatsɔ dziŋgɔli si me kɔ alo nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi si wowɔ ɖe ɖoɖo nu akpe ɖe eŋu, akpɔ nɔnɔmetata siwo wota ta eye wòakpe ɖe eŋu wòawɔ kaɖi si wowu enu ƒe anyigba.
Ao, zi geɖe la, nutsyɔnu nyea gotagome ƒuƒoƒo tsɛ aɖe si me kɔ. Holographic core sheet nye xɔtuɖaŋu alo atsyɔ̃ɖoɖo ƒe ƒuƒoƒo si le kpekpem wu le kaɖia ƒe ŋutilã me. Woƒe titrime, agbalẽtata kple lamination ƒe akpawo to vovo.
Adzɔnu ŋuti nyatakaka siwo wona la yɔ abe 0.04–0.10mm ene. Titrime nyuitɔ nɔ te ɖe ŋgɔgbe kple megbe ƒe nutsyɔnu, nu vevi ƒe ƒuƒoƒo, RFID inlay kple taɖodzinu si wowu-kaɖi ƒe titrime dzi. Ele be woaɖo kpe tiatia mamlɛawo dzi le nyayɔyɔ kple kpɔɖeŋu si dzi woda asi ɖo me.
Woate ŋu ada logo siwo wowɔ ɖe ɖoɖo nu, nuŋɔŋlɔ, geometry kple dɔa koŋ ƒe nukpɔkpɔ ƒe nɔnɔmewo kpɔ. Zi geɖe la, ŋgɔyiyi bia nutatawo me toto, woƒe dzɔtsoƒe, woƒe kpeɖodzi ŋutɔŋutɔ, woƒe ŋkɔ dede agbalẽ me ƒe dzidzenuwo kple asitsatsa ƒe kpeɖodzi.
Atsyɔ̃ɖoɖo ƒe nutsyɔnu ɖeka aɖeke mate ŋu aka ɖe edzi be woakpɔ ame ta bliboe o. Holographic ƒe nɔnɔme si wowɔ ɖe ɖoɖo nu ate ŋu ado alɔ nukpɔkpɔ ƒe kpeɖodzi, gake ɖaseɖigbalẽ siwo le dedie hã bia nutata siwo dzi wokpɔna, wo nana, nyatakakawo ƒe dedienɔnɔ, ame ŋutɔ ƒe tɔtrɔ kple dɔa koŋ takpɔnu bubuwo.
Dɔwɔnu si sɔ la tsɔa nusi wotsɔ blaa nu la dana ɖe nu vevi aɖe si wota dzi. Ne atike si sɔ si woate ŋu ata la le nusi wotsɔ blae tẽe ŋu eye wòto dodokpɔ siwo wowɔna tsɔ léa nu ɖe nu ŋu, dɔyɔyɔ kple lamination me kple nuƒlela ƒe nuŋlɔtsi ƒe ɖoɖo ŋutɔŋutɔ ko hafi woate ŋu atae tẽ.
Woɖoe na PVC kaɖi ƒe lamination si dze, gake ele be nuƒlela naɖo kpe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi, fafa, nutsyɔtsyɔ kple ink ƒe ɖekawɔwɔ dzi to ewɔwɔ ƒe kpɔɖeŋu dzi.
Nuwo ƒe ƒuƒoƒo ate ŋu adzɔ, gake ele be woado kadodo, didime ƒe liƒo kple kaɖi si wowu enu ƒe anyinɔnɔ kpɔ. Mele be woasusui le eɖokui si be PVC ƒe nutsyɔnu bla ɖe kaɖi ƒe nu bubu ɖesiaɖe ŋu nyuie o.
Ẽ, ne wotsɔe de RFID alo NFC kaɖi ƒe xɔtutu si ŋu woda asi ɖo me. Ele be woado kaɖi bliboa kpɔ le lamination kple punching megbe be woaɖo kpe antenna ƒe dɔwɔwɔ, chip ƒe nɔƒe, kaɖi ƒe gbadzaƒe kple taɖodzinu ƒe nuxexlẽ ƒe nuwɔna dzi.
Na agbalẽa ƒe ɖoɖo bliboa, kaɖi ƒe matriki, punching line, feature coordinates, nuɖuɖu ƒe mɔfiame, kpɔɖeŋu gbugbɔgagblɔ kple X/Y mɔɖeɖe si dzi woda asi ɖo. Ele be woada asi ɖe dodokpɔgbalẽvi si woŋlɔ ŋkɔ na dzi hafi woawɔe le agbɔsɔsɔ gã me.
Do dzedzeme, gaglãgbe, ahomya, agbalẽtata ƒe dzedzeme, nutsyɔnu ƒe akpa, lãgbalẽ ƒe ŋusẽ, kuɖɔwo, nugbɔ ƒe kadodo, ʋuʋudedi, warpage, mamlɛtɔ ƒe titrime, punching kple barcode ɖesiaɖe, magnetic-stripe, chip alo RFID dɔwɔwɔwo.
Ðo kaɖia ƒe dɔbiagbalẽvi, ƒuƒoƒo ƒe wɔwɔme, nuwuwu ƒe titrime, nutsyɔnu ƒe titrime, agbalẽa ƒe lolome, kpɔɖeŋu, gaglãgbe, ŋkɔ ŋɔŋlɔ, ink ƒe ɖoɖo, lamination ɖoɖowo, agbɔsɔsɔme si wobu, packing kple yiyi.
