|
siliki pad
Wallis
| Girma: | |
|---|---|
| Material: | |
| fa'ida: | |
| Aikace-aikace: | |
| Yawan: | |
Wallis babban zafin jiki na siliki na lanƙwasa kati shine mai sake amfani da latsawa wanda aka ƙera don kayan aikin filastik na masana'antu. Yana taimakawa ramawa ga ƙananan tari da bambance-bambancen platen yayin da ke tallafawa ƙarin rarraba matsi mai ɗaiɗaiɗi yayin lamincewar latsa mai zafi na PVC , PETG da tsarin katin PC .
Akwai a cikin 3mm, 5mm, 8mm da 10mm kauri tare da na musamman girma, da silicone kushin za a iya daidaita da daban-daban lamination faranti, katin-sheet Formats da kuma samar da kayan aiki. Hakanan za'a iya sake duba kauri na al'ada, yawa, siffa da buƙatun saman don ayyukan OEM da ODM .
Aikace-aikace na yau da kullun sun haɗa da katunan banki, katunan ID, katunan membobinsu, katunan maganadisu na maganadisu, katunan maganadisu, RFID da katunan maras amfani, katunan wayo, katunan filastik da yawa da kuma Fim ɗin overlay -fim lamination.
Don zaɓin ƙwararrun ƙwararrun B2B, masu siye yakamata su samar da ƙirar laminator, girman farantin karfe, kayan kati, kauri, zafin latsa zafi, matsa lamba, lokacin zama, hanyar sanyaya da ƙarewar da ake buƙata . Waɗannan sigogi sun fi amfani fiye da zaɓin kushin latsa ta kauri kaɗai.
| Ƙayyadaddun Ƙirar / Siffa | ta Musamman / Akwai Zaɓuɓɓuka |
|---|---|
| Kayan Kwalliya | Silicone mai jure zafi |
| Yanayin Aiki | An tsara don katin-lamination zafi; ya kamata a ƙayyade ainihin ci gaba da zafin jiki mafi girma kuma a tabbatar da kushin da aka zaɓa |
| Zaɓuɓɓukan kauri | 3mm / 5mm / 8mm / 10mm; al'ada kauri samuwa a kan bukatar |
| Girman Pad | Musamman don dacewa da farantin lamination da girman injin |
| Rarraba Matsi | An ƙirƙira don tallafawa ƙarin rarraba matsa lamba iri ɗaya a cikin yankin latsa mai amfani |
| Surface | M silicone lamba surface; tabbatar da ƙarewar ƙasa da buƙatun sakin don aikace-aikacen da aka zaɓa |
| Hardness / yawa | Mai iya daidaitawa; ainihin taurin Teku ko yawa yakamata a tabbatar da shi a cikin ƙayyadaddun fasaha |
| Dorewa | Maimaituwa a ƙarƙashin yanayin zafi mai dacewa, matsa lamba, tsaftacewa da yanayin ajiya; ainihin tazarar maye ya dogara da tsari |
| Siffar / Edge Jiyya | Rectangular, farantin-daidaitacce ko siffa da aka yanke |
| Aikace-aikace | PVC , PETG da PC kati, Fim ɗin overlay lamination, RFID da kuma samar da smart-cards |
| Standard MOQ | 100 zanen gado bisa ga bayanin samfurin Wallis na yanzu |
| Lokacin Jagora | 7-15 kwanaki bayan tabbatar da oda bisa ga bayanin samfurin na yanzu |
| Marufi | Akwatin katon tare da nannade kariya |
| OEM / ODM | Girman al'ada, kauri, yawa, siffa da buƙatun dacewa da injin |
Muhimmin bayanin injiniya: shafin Wallis na yanzu baya buga ƙayyadaddun madaidaicin zafin jiki, Shore A hardness, saitin matsawa, dawo da matsi, juriyar kauri, haƙuri mai laushi ko garantin ƙidayar zagayowar. Masu saye da ke buƙatar waɗannan sigogi yakamata su nemi takamaiman bayanan fasaha na ƙira maimakon ɗaukar ƙima daga wani kushin silicone.
Kushin latsa siliki shine Layer mai yarda da aka yi amfani da shi a cikin tarin lamination na katin latsa mai zafi. Yana zaune a cikin taron manema labarai don taimakawa ramawa ƙananan bambance-bambancen kauri da goyan bayan maɗaukakin kayan aikin inji a cikin yankin takardar katin.
Layin silicone mai yarda zai iya taimakawa ramawa don ƙananan bambance-bambance a cikin tarin katin, yanayin faranti da kauri na gida. Wannan yana da dacewa musamman lokacin laminating tsarin katin multi-layer ko zanen gado mai ɗauke da inlays RFID , guntu ko wasu bambancin kauri na gida.
Kushin yana aiki a cikin tsarin dumama mai maimaitawa, latsawa da sanyaya. Kaurinsa, taurinsa da yanayin zafi dole ne a daidaita shi da cikakken girke-girke na lamination maimakon zaɓin kansa.
Matsakaicin matashin kai na iya rage ƙaƙƙarfan tuntuɓar mahalli tsakanin abubuwan haɗin latsa kuma yana taimakawa kare gogewar faranti da zanen kati daga madaidaicin lodawa. Tsafta ya kasance mai mahimmanci saboda ƙura ko ɓangarorin da ke ciki na iya canza lahani zuwa saman da aka liƙa.
Daidaitaccen zaɓaɓɓen matashin kai zai iya taimaka wa manema labarai yin amfani da ƙarfi iri ɗaya a duk yankin da ake amfani da katin kati, yana goyan bayan madaidaicin lamba a lokacin lamination.
Makullin katin filastik na iya ƙunsar ƙananan bambance-bambance a cikin yadudduka da aka buga, Fim ɗin overlay s, inlays ko tsarin gida. Kushin da ya dace zai iya ɗaukar wasu bambance-bambancen maimakon canja wurin kowane bambanci kai tsaye ta cikin faranti na karfe.
Yin amfani da ƙayyadaddun kushin sarrafawa tare da bayanan zafin jiki, matsa lamba da girke-girke na iya inganta maimaita aiki tsakanin batches.
Kushin latsa shi kaɗai ba zai iya ba da garantin katunan kumfa, mara yaƙe-yaƙe ko ɓarnawa katunan. Bushewar tawada, danshi, iska mai kamawa, daidaiton kayan abu, daidaiton farantin karfe, daidaiton dumama, matsa lamba, lokacin zama da yanayin sanyaya suma suna shafar sakamako na ƙarshe.
Wallis a halin yanzu yana ba da zaɓuɓɓukan kauri na 3mm, 5mm, 8mm da 10mm. Kushin da ya fi kauri ba shi da kyau ta atomatik. Kauri yana canza tsayin tari, ɗabi'ar matsawa da yuwuwar amsawar zafi na taron lamination.
Ana iya kimanta kushin 3mm inda laminator ke da iyakataccen sarari ko kuma inda ake buƙatar ƙananan kauri. Dacewar ƙarshe ya dogara da taurin, matsawa da saitunan injin.
Gina 5mm yana ba da wani zaɓi don injuna ko tarin katin da ke buƙatar ƙarin kauri mai yarda. Ya kamata a gwada shi akan girke-girke na lamination kafin amfani da samarwa.
Kushin 8mm na iya ba da ƙarin zurfin matashin jiki, amma masu siye yakamata su tabbatar da izinin latsawa, amsawar canjin zafi da matsa lamba.
Dole ne a zaɓi kushin 10mm kawai bayan tabbatar da izinin injin, halin matsin lamba da bayanin martaba. Yawan kauri ko laushi na iya canza yanayin lamination da aka yi niyya.
Za'a iya sake duba kauri mara nauyi don takamaiman laminators da ƙira-tari na kati. Aika samfurin kushin data kasance, zanen fasaha ko bayanin inji lokacin da ake buƙatar canji na musamman.
'Mai girman zafin jiki' bai isa ba don ƙayyadaddun aikin injiniya. Ya kamata masu siye su samar da yanayin zafin latsawa na yau da kullun, matsakaicin zafin jiki, lokacin zama da adadin zagayowar kowane motsi don haka zaɓaɓɓen ginin silicone ana iya sake duba shi.
Taurin yana rinjayar yadda sauƙi silicone pad ke lalacewa ƙarƙashin nauyin latsawa. Wallis a halin yanzu yana lissafin taurin ko yawa azaman wanda za'a iya daidaita shi amma baya buga ƙayyadadden ƙimar Shore A na wannan samfurin. Haɗa taurin da ake buƙata a cikin binciken fasaha idan tsarin ku yana sarrafa shi.
Kushin latsa mai sake amfani da shi yakamata ya murmure sosai bayan an matsawa akai-akai. Masu saye da ke gudanar da samar da babban zagayowar ya kamata su nemi madaidaicin saiti ko bayanan dawo da aikin da aka zaɓa a inda ake buƙata.
Bambance-bambance a cikin kauri na kushin zai iya rinjayar matsa lamba na gida a kan babban farantin lamination. Don daidaitaccen samarwa, ƙididdige haƙurin kauri mai karɓuwa, ƙasƙanci da yanke girman juriya a cikin ƙayyadaddun siyan.
Za a iya amfani da pads ɗin latsawa na siliki a cikin lamination na lamination na multi-layer PVC katunan katunan, gami da bugu na ainihin yadudduka da PVC Fim ɗin overlay s.
PETG Tsarin katin kuma na iya amfani da madaidaicin matashin matashin siliki. Ya kamata a daidaita girke-girke mai dumama da sanyaya da kayan PETG da cikakken ginin kati.
PC samar da katin yawanci yana buƙatar zafi mai sarrafawa, matsa lamba da sanyaya. Tabbatar da cewa ainihin ƙarfin zafin jiki na silicone pad ɗin da aka zaɓa ya dace da zagayowar lamination PC da injin ku ke amfani da shi.
RFID da zanen kati marasa lamba na iya ƙunsar eriya, guntu ko bambance-bambancen kauri na gida. Matsakaicin matashin matashin kai zai iya taimakawa wajen ɗaukar ƙananan bambance-bambancen yayin da ake riƙe lambar sadarwa mai sarrafawa.
Pads ɗin latsa na iya zama wani ɓangare na tarin lamination da ake amfani da su don samar da banki, membobinsu da takaddun katin maganadisu kafin bugun ƙasa, keɓancewa da ƙarewa.
Silicone cushioning kuma zai iya tallafawa Fim ɗin overlay -fim lamination. Masu saye ya kamata su tabbatar ko kushin yana tuntuɓar farantin karfe kai tsaye, sakin layi ko wani sashi a cikin takamaiman tari.
Wannan shafin yana mai da hankali ne kan madaidaicin siliki na Wallis wanda ake samu a cikin kauri 3mm, 5mm, 8mm da 10mm. Yi amfani da wannan mahallin samfurin lokacin da ƙayyadaddun aikin ke kira ga kushin tushen silicone ba tare da ginin ulu da aka kwatanta akan shafin samfurin ulu-silicone daban na Wallis ba.
Wallis kuma yana ba da keɓan samfurin siliki-fiberglass katin lamination samfurin matashin kai. Masu saye ya kamata su kwatanta kauri, ƙarfafawa, taurin, amsawar zafi da halayen matsawa maimakon kula da samfuran duka iri ɗaya.
Gilashin ulu-silicone suna amfani da tsarin kwantar da hankulan da aka haɗe da silicone. Amsar su ta thermal da matsawa na iya bambanta da siliki-kawai ko kushin ƙarfafa fiberglass.
Hanyar zaɓi mafi aminci ita ce gwada pads ɗin ɗan takara tare da laminator iri ɗaya, faranti na ƙarfe, kayan kati, Fim ɗin overlay , zafin jiki, matsa lamba da girke-girken sanyaya da ake amfani da su wajen samarwa.
Aika tsayin farantin-farantin mai amfani da faɗi ko samar da zanen kushin da ke akwai. Ya kamata a nuna ba da izini don sanya ramuka, yanke-fita ko fasalulluka na inji na musamman.
Zaɓi 3mm, 5mm, 8mm, 10mm ko samar da kauri na kushin da aka yarda da shi.
Jiha yanayin yanayin aiki na yau da kullun, matsakaicin zafin jiki da zafi
