|
WLS-INKJƐT SHEET
WALLIS
| Kɔlɔ: | |
|---|---|
| Sayz: | |
| Tik : | |
| Surface: | |
| Kwantiti: | |
Wallis de saplae PETG koted ovalay ɛn PET inlay matirial fɔ profeshɔnal kad manifakta dɛn we de prodyuz ID kad dɛn we de te, akses kad, RFID kad, NFC kad, pemɛnt kad, transpɔt kad, mɛmbaship kad, ɔtel ki kad, ɛn kɔstɔmayz smat kad.
di transparent PETG כvlay de fכm di protεktiv כta layεr fכ di laminated kad, we di PET inlay de fכm di intanal strכkchכral כ fכnshכnal layεr. Dipen pan di projɛkt, dɛn kin gi di PET inlay as plein kad kɔr ɔ as RFID prelaminated inlay we gɛt chip ɛn ɛntena.
Tiknes, shit dimɛnshɔn, kad layout, surface finish, kotin trɛnk, RFID frikshɔn, chip tayp, antena dizayn, printin kɔmpatibiliti, pak, ɛn lɛbl kin kɔstɔmayz fɔ OEM ɛn ay-volyum kad prodakshɔn.
B2B kɔstɔmayshɔn: PETG ɔvlay tik ɛn finish, plein ɔ RFID PET inlay, LF/HF/UHF frikshɔn, chip mɔdel, ɛntena matirial, shit layout, kad kwantiti fɔ ɛni shit, print rɛjista mak, pak, ɛn OEM lɛbl.
| Sɔntin | PETG kot ɔvlay ɛn PET inlay fɔ kad laminɛshɔn |
| Ovlay Matirial | PETG we de transparent |
| Inlay Matirial | PET strɔkchɔral kɔr ɔ PET-bɛs RFID prɛlaminɛt inlay |
| PETG Ɔvlay Tiknɛs | 0,04mm–0,15mm, ɛn di ɔda wan dɛn; di kɔmɔn opshɔn dɛn inklud 0.06mm, 0.08mm, ɛn 0.10mm; tik we dɛn kɔstɔmayt de |
| PET Inlay Tiknɛs we pɔsin kin gɛt | Customized akɔdin to di kɔmplit kad strɔkchɔ; 0.25mm ɛn ɔda prɔjek-spɛsifi k opshɔn dɛn kin evalyu |
| Sayz fɔ di Shit | A4, A3, 295 × 460mm, 295 × 485mm, ɛn dimɛnshɔn dɛn we dɛn kɔstɔmayt |
| Layout fɔ di kad dɛn | 2 × 5, 3 × 7, 3 × 8, 4 × 8, 5 × 5, 4 × 10, ɔ kɔstɔmayt shit impɔzishɔn |
| Di Opshɔn dɛn fɔ Ɔvlay | Kot ɔvlay, strɔng kot ɔvlay, nɔ-kot ɔvlay, laserable ɔvlay, mat ɔvlay, ɛn magnɛtik strɛp ɔvlay |
| Surface Finish na di wɔl | Smɔl, glos, mat, frɔst, anti-skrach, ɔ kɔstɔmayt finish |
| PET Inlay Tayp | Plɛn PET kɔr, ɛntena-onli inlay, RFID prɛ-inlay, RFID prɛlamin inlay, ɔ dual-frikyuɛnsi inlay |
| RFID Frikyuɛnsi Opshɔn dɛn | 125kHz LF, 13.56MHz HF/NFC, UHF, ɔ dual-frikyuɛnsi kɔnfigyushɔn, we de ɔnda di prɔjek rikwaymɛnt dɛn |
| Chip Opshɔn dɛn | Di LF, HF, NFC, ɛn UHF chips dɛn we di kɔstɔma dɛn nominate ɔ we di prɔjek dɔn rɛkɔmɛnd, we go bi se dɛn gɛt am ɛn if di wan dɛn we de rid go kɔmpit |
| Di Opshɔn dɛn fɔ Ɛntena | Kɔpa waya ɛntena, etch aluminiɔm ɛntena, ɔ kɔstɔmayz ɛntena dizayn |
| Kɔlɔ | Transparent ɔvlay; wayt, transparent, ɔ kɔstɔmayz PET inlay strɔkchɔ |
| Aplikeshɔn dɛn | ID kad, RFID kad, NFC kad, akses kad, pe kad, transpɔt kad, wokman kad, mɛmbaship kad, ɔtel ki kad, ɛn smat lɛbl |
| OEM Savis dɛn | Matirial, tik, saiz, layout, chip, frikshɔn, ɛntena, kɔtin, sɔfays, printin mak, pak, ɛn prayvet lɛbl |
Faynal dimɛnshɔn, tiknɛs, chip, ɛntena, frikshɔn, rid pefɔmɛns, kɔtin, ɛn lamineshɔn paramita dɛn fɔ kɔnfɔm tru wan aprɔv tɛknikal spɛsifikɛshɔn ɛn prodakshɔn sampul.
PETG coated overlay ɛn PET inlay na tu difrɛn layers we dɛn kin yuz togɛda fɔ laminated plastic ɛn smart kad kɔnstrɔkshɔn.
Di PETG kɔt ɔvlay kin nɔmal fɔ put am na di frɔnt ɛn bak say na di kad. I de protɛkt di artwok we dɛn print ɛn ɛp fɔ bon di ɛksternal layers to di intanɛnt kad strɔkchɔ we dɛn de du thermal lamination.
Di PET inlay de insay di kad. I kin bi wan klin strɔkchɔral shit, wan layt we gɛt ɛntena nɔmɔ, ɔ wan kɔmplit RFID prɛlaminɛt kɔr we gɛt chip ɛn ɛntena. Di kɔrɛkt difinishɔn fɔ kɔnfɔm we dɛn de aks fɔ kot.
PETG na glycol-modified polyester matirial we dɛn kin yuz usay optik klia, tafnɛs, fɔmabiliti, ɛn rili bɔnd nid fɔ de. Insay kad prodakshɔn, dɛn kin yuz transparent PETG fim as protɛktiv ɛn dɛkɔretiv sɔfa layt.
Dɛn kin put di kɔtin na di kad-kɔntakt sayd na di ɔvlay fɔ mek i adheshon to kɔmpitabl print sheet, PET layers, PETG layers, PVC layers, ɔ kɔmpɔzit kad strɔkchɔ dɛn. Di kɔtin gred fɔ mach wit di printin ink, kad kɔr, tɛmpracha, prɛshɔn, ɛn lamineshɔn saykl.
Ovalayz kwaliti de afɛkt di kad transparency, glos, flatnɛs, print-imej visibiliti, peel trɛnk, surface resistans, dimɛnshɔnal stebiliti, ɛn finish-kad apinans. Di wan dɛn we de bay fɔ tɛst di ɔvlay wit di aktual ink ɛn laminatɔ pas fɔ abop pan di nominal matirial spɛsifikɛshɔn dɛn nɔmɔ.
Transparent PETG Kɔt Ɔvlay
PETG Ovlay Sheet fɔ Laminɛshɔn
Transparent PETG ɔvlay de alaw fɔ mek foto dɛn we dɛn print, logo, tɛks, barɔd, QR kɔd, vayriɔbul data, ɛn sikyɔriti grafik dɛn kɔntinyu fɔ de klia wan afta dɛn dɔn lamin.
Wan fayn say we dɛn kɔt ɔ we gɛt strɔng kɔt de mek di bonding bitwin di ɔvlay ɛn di kad layers we dɛn print bɛtɛ, we de ɛp fɔ ridyus di peel, edj liftin, bɔbul, ɛn intalayers separeshɔn.
Di ɔvlay de protɛkt di infɔmeshɔn we dɛn print frɔm di rutin abrasion, mɔstɔ, finga prɛnt, dɔti, frikshɔn, ɛn ripit hanlin we yu de yuz di kad nɔmal.
Yu kin ebul fɔ evalyu di opshɔn dɛn we gɛt glos, we smol, we mat, we gɛt frɔst, we nɔ gɛt bɔku glas, we nɔ de skrach, ɛn we yu want fɔ mek yu sɔfa akɔdin to di we aw dɛn mek di kad ɛn di we aw dɛn mek di kad.
Di wan dɛn we de bay kin pik standad kɔt ɔvlay, strɔng-kɔt ɔvlay, nɔ-kɔt ɔvlay, laserable matirial, ɔ magnɛtik strɛp ɔvlay akɔdin to di kad strɔkchɔ ɛn prɔsesin rikwaymɛnt.
Plɛn PET inlay na intanɛnt kad layt we nɔ gɛt RFID chip ɔ ɛntena. I de ɛp fɔ bil di kad tik we dɛn nid, mɛkanikal strɔkchɔ, fleksibiliti, opasiti, ɛn dimɛnshɔnal stebiliti.
Wan inlay we gɛt ɛntena nɔmɔ gɛt kɔpa ɔ aluminiɔm ɛntena bɔt i nɔ gɛt di las chip kɔnɛkshɔn. I kin bi se na manifakta dɛn we de kɔmplit chip bonding ɔ modul asɛmbli na dɛn yon prodakshɔn fasiliti kin pik am.
Wan RFID prɛ-inlay de intagret wan sɛlɛkɛt chip ɛn ɛntena pan wan PET kyaria. I de fɔ mek dɛn chenj am mɔ, ɛnkapsul, ɔ lamin am to wan kɔmplit smat kad strɔkchɔ.
Wan prelaminated RFID inlay gɛt di chip ɛn ɛntena we dɛn lɔk insay pripia kad-kɔr layers. Di wan dɛn we de mek kad kin jɔyn am wit print kɔr shit ɛn PETG ɔvlay bifo fainal lamination ɛn panch.
PET RFID Inlay Struktrɔ
Smart Kad Inlay fɔ Laminashɔn
Wan 125kHz LF inlay na in dɛn kin tink bɔt fɔ proksimiti aydentifikeshɔn, besik akses kɔntrol, atɛndans kad, animal aydentifikeshɔn, ɔtel sistɛm, ɛn aplikeshɔn dɛn we de yuz kɔmpitabl shɔt-rɛnj LF rida dɛn.
Chip sɛlɛkshɔn fɔ mach wit di kɔstɔma in rida, data fɔmat, mɛmori, rid-onli ɔ riraytabl rikwaymɛnt, sikyɔriti rikwaymɛnt, ɛn sistɛm protɔkɔl.
Yu kin yuz 13.56MHz HF ɔ NFC inlay fɔ akses kɔntrol, pɔblik transpɔt, laybri kad, kampus kad, mɛmbaship program, aydentifikeshɔn, ɔthɛntishɔn, mobayl intarakshɔn, ɛn kɔntaktlɛs pemɛnt prɔjek.
Di chip we dɛn nid fɔ pik akɔdin to di aplikebul rida pletfɔm, mɛmori, ɛnkripshɔn, ɔthɛntishɔn, protɔkɔl, rid distans, ɔpreshɔn ɛnvayrɔmɛnt, ɛn sɛtifikeshɔn rikwaymɛnt dɛn.
UHF inlays kin bi fɔ tink bɔt fɔ lɔng-rɛnj aydentifikeshɔn, ɛset manejmɛnt, lɔjistik, motoka aydentifikeshɔn, ivin manejmɛnt, invɛntari, ɛn aplikeshɔn dɛn we nid fɔ rid bɔku tin dɛn kwik kwik wan.
UHF frikshɔn band, ɛntena dizayn, chip, rigyuletɔri rijyɔn, rida pawa, instɔleshɔn ɛnvayrɔmɛnt, matirial dɛn we de rawnd, ɛn rid distans we dɛn nid fɔ kɔnfɔm bifo dɛn prodyuz.
Wan dual-frikyuɛnsi inlay de kam togɛda tu RFID teknɔlɔji dɛn insay wan kad kɔnstrɔkshɔn. I kin sɔpɔt sistem dɛn we nid fɔ kɔmpit wit tu rida infrastukchɔ, bɔt chip spɛshal, ɛntena intarakshɔn, sheet layout, kad tik, ɛn finish-kad pefɔmɛns nid fɔ gɛt prɔjek-spɛsifi k injinɛri.
Insay wan tipik laminated smart kad, di PETG ɔvlay de protɛkt di kad sɔfays we di PET inlay de gi di intanɛnt strɔkchɔ ɔ kɔntaktlɛs fɛnshɔn. Wan kɔnstrɔkshɔn we dɛn mek fɔ yusɛf kin gɛt dɛn layers ya:
Front transparent PETG kot ɔvlay.
PET, PETG, PVC, ɔ kɔmpɔzit kad-kɔr sheet we dɛn print bifo.
Plɛn PET strɔkchɔral inlay ɔ RFID PET inlay we gɛt di chip ɛn ɛntena.
Kad-kɔr sheet we dɛn print biɛn.
Riar transparent PETG kot ɔvlay.
We dɛn de lamination, ɔt ɛn prɛshɔn kin bon di layers insay wan yunifayd kad bɔdi. Di tɛmpracha we dɛn dɔn gri fɔ, di prɛshɔn, di tɛm we dɛn kin ɔt, di tɛm we dɛn kin kol, di say we dɛn kin stak, ɛn di plet dɛn we dɛn kin rilis kin dipen pan di rayt tin dɛn ɛn di ikwipmɛnt dɛn.
Sos di ɔvlay ɛn inlay as kɔdinɛt sistɛm de ɛp kad manifakta dɛn fɔ manej matirial kɔmpatibiliti, layt tik, sheet layout, rɛjista, ɛn bay frɔm wan spɔlayt.
Di laminated strɔkchɔ de kɔba di chip ɛn ɛntena insay di kad bɔdi, we de ɛp fɔ protɛkt ilɛktronik kɔmpɔnɛnt dɛn frɔm rutin hanlin, kɔntaminɛshɔn, abrashɔn, ɛn dairekt sɔfays kɔntakt.
Transparent ɔvlay de mek di infɔmeshɔn we dɛn print nɔ ebul fɔ si, ɛn di inlay we de insay de mek di kad tik, di strɔkchɔ, ɛn di ilɛktronik wok we i nid.
Di wan dɛn we de mek kad kin kɔstɔmayz ɔvlay tik, inlay tik, chip tayp, antena dimɛnshɔn, sheet layout, surface finish, print mak, magnɛtik strɛp, signature panɛl, ɔ ɔda funkshɔn ɛlimɛnt dɛn.
Inlay sheet dɛn we dɛn dɔn arenj bifo tɛm de alaw fɔ laminate ɛn panch bɔku kad dɛn insay wan prodakshɔn saykl, we de mek dɛn kɔnsistɛns ɛn ridyus di nid fɔ put chips ɛn ɛntena dɛn wan bay wan we dɛn de gɛda di fayn kad.
PET RFID inlays kin kɔnfigyut fɔ wokman akses kad, bildin kredibiliti, kampus kad, visitɔ kad, pak kad, ɔtel kad, ɛn restricted-area identification.
PETG ɔvlay de protɛkt foto dɛn, nem dɛn, nɔmba dɛn, barɔd dɛn, ɛn infɔmeshɔn we dɛn print, we di PET inlay de gi di fizik ɔ kɔntaktlɛs kad wok we dɛn nid.
Dɛn kin evalyu di HF inlay dɛn we dɛn dɔn kɔstɔmayz fɔ transpɔt, tikɛt, fɔ kɔlekt di prays, pak, kampus transpɔt, ɛn mobiliti program dɛn we dɛn de yuz kɔmpitabl rida ɛn bakɛnd sistem dɛn.
Peyment-kad projɛkt dɛn nid di kɔrɛkt chip, ɛntena, kad-bɔdi kɔnstrɔkshɔn, pɔsnalayzeshɔn prɔses, sɛtifiket, rida kɔmpatibiliti, ɛn aplikebul pemɛnt-nɛtwɔk aprɔval. Matirial saplai nכmכ de establish finish-kad kompliance.
RFID ɔ NFC funkshɔnaliti kin intagret insay rital lɔyalti kad, jim kad, klab kad, ivin kad, laybri kad, ɔspitul kad, ɛn kɔstɔma mɛmbaship program.
NFC chips we kɔmpitabl kin sɔpɔt mobayl-divays intarakshɔn fɔ dijital biznɛs kad, prodak ɔthɛntishɔn, wɛbsayt akses, ivin ɛnjɔymɛnt, mɛmbaship verifyeshɔn, ɔ ɔda program fɔnkshɔn dɛn.
PET inlays kin intagret insay kad dɛn we gɛt bak kɔntakt chip, magnɛtik strɛp, barɔd, QR kɔd, sayn panɛl, ɔlografik ɛlimɛnt, ɔ bɔku RFID teknɔlɔji dɛn.
Kɔnfɛm di dimɛnshɔn dɛn fɔ di kad we dɔn dɔn, di tik we di target tik, di we aw di kad dɔn, di layf we dɛn de op fɔ na di kad, di we aw dɛn de yuz am, di we aw dɛn de print, di we aw dɛn de mek di pɔsin insɛf sɛf, ɛn di wok dɛn we dɛn nid fɔ du.
Stet if di projɛkt nid fɔ gɛt plein strɔkchɔral PET kɔr, ɛntena-onli inlay, chip-ɛn-antena prɛ-inlay, ɔ kɔmplit prɛlaminated RFID inlay.
Gi di rida mɔdel, ɔpreshɔn frikshɔn, protɔkɔl, mɛmori rikwaymɛnt, sikyɔriti rikwaymɛnt, data fɔmat, rid distans we dɛn nid, ɛn kɔrɛnt kad ɔ chip rɛfrɛns.
Pik di chip akɔdin to di sistɛm kɔmpatibiliti ɛn pik wan ɛntena dizayn we fit di kad layout, di chip kapasiti, rid-distans rikwaymɛnt, lamination kɔndishɔn, ɛn matirial dɛn we de rawnd.
Kɔnfɛm di nɔmba fɔ di kad dɛn fɔ ɛni sheet, di dimɛnshɔn fɔ di shit, di mak dɛn we dɛn de rɛjista, di say we di ɛntena de, di say we di chip de, di say we dɛn de panch, di say we dɛn print, ɛn di tolɛreshɔn we dɛn nid.
Gi di kad-kɔr matirial, di kayn ink, di we aw dɛn de print, di we aw dɛn de mɛn am, di we aw dɛn de kɔba di print, ɛn di kɔndishɔn we di laminata gɛt so dat dɛn go ebul fɔ ebul fɔ no di standad ɔ strɔng kɔtin.
Test di aktual ɔvlay ɛn inlay wit di printa we yu want, ink, laminatɔ, panch mashin, rida, ɛnkɔda, pɔsnalayzeshɔn ikwipmɛnt, ɛn di kwaliti dɛn we yu nid fɔ mek di kad we dɔn dɔn.
Send yu kad strɔkchɔ, ɔvlay tik, PET inlay tayp, frikshɔn, chip, ɛntena, sheet layout, printin prɔses, kwantiti, ɛn ples fɔ wan prɔjek-spɛsifi k rɛkɛmɔndeshɔn.
Gɛt wan Matirial RikɔmɛndishɔnPETG ɔvlay, print kad-kɔr shit, ɛn PET inlay shit dɛn kin kɔndishɔn, klin, inspɛkt, ɛn arenj akɔdin to di we aw dɛn dɔn gri fɔ mek di shit ɛn di kad-layer drɔ.
Di sheet dɛn we dɛn print fɔ yuz kɔrɛkt rɛjista mak dɛn so dat di grafik dɛn, di say dɛn we di ɛntena dɛn de, di chips dɛn, di layn dɛn we dɛn de kɔt, di magnɛtik strɛp dɛn, ɛn di ed dɛn fɔ di kad dɛn go kɔntinyu fɔ alaynɛd kɔrɛkt wan.
Di frɔnt ɔvlay, print kɔr, PET inlay, riya print kɔr, ɛn riya ɔvlay de stak insay di apruv ɔriɛnteshɔn. Di kot surfaces must fes di korekt bonding layers.
Di ɔt ɛn prɛshɔn we dɛn kin kɔntrol kin mek di layers dɛn jɔyn togɛda. Di lamination resipi fɔ establish tru tɛst bikɔs pasmak ɔt, prɛshɔn, ɔ saykl tɛm kin afɛkt flatnɛs, chip kɔnɛkshɔn, ɛntena pefɔmɛns, transparency, ɛn sheet shrinkage.
Dɛn kin kol laminated sheet dɛn ɔnda kɔntrol kɔndishɔn fɔ mek di kad strɔkchɔ stebul ɛn fɔ ridyus di wɔp, difɔmeshɔn, bɔbul, ɛn nɔ ivin bɔnd.
Dɛn kin panch di laminated sheet dɛn insay kad dɛn ɛn afta dat dɛn kin du printin, ɛnkɔd, laser mak, ɛmbos, chip-mɔdyul instɔleshɔn, magnɛtik ɛnkɔdin, signɛshɔn-panɛl aplikeshɔn, ɔ ɔda finish prɔses.
Dɛn fɔ tɛst RFID kad dɛn wit di wan dɛn we dɛn want fɔ rid fɔ kɔnfɔm chip aydentifikeshɔn, data kɔmyunikeshɔn, ɛntena kɔntinyuiti, ridin distans, ɔriɛnteshɔn, ɛnkɔdin, ɛn sistɛm kɔmpatibiliti.
Matirial ɛn kɔtin-grɛd verifyeshɔn.
Tiknes ɛn sheet-dimɛnshɔn inspekshɔn.
Transparency, haz, glos, ɛn surface-finish inspekshɔn.
Dɔst, skrach, wrinkle, pinhol, ɛn kɔntaminɛshɔn inspekshɔn.
Kotin yunifomiti ɛn kot-sayd idɛntifikeshɔn.
Trayal lamination, flatnɛs, shrinkage, ɛn peel-strength ɛvalueshɔn.
PET karia matirial, tik, dimɛnshɔn, ɛn shit-layout verifyeshɔn.
Chip model, kwantiti, pozishɔn, ɛn ɔriɛnteshɔn verifyeshɔn.
Antena dimɛnshɔn, rɛsistɛns, kɔntinyu, kɔnɛkshɔn, ɛn vijual inspekshɔn.
Chip-to-antena bonding ɛn ilɛktrik-fɔnshɔn tɛst.
Surface flatness, encapsulation, bubble, ɛn fɔrin-patikul inspekshɔn.
Rida kɔmyunikeshɔn, UID ridin, mɛmori akses, ɔ ɛnkɔdin tɛst akɔdin to di chip we yu dɔn pik.
Finish dimɛnshɔn ɛn tik.
Di we aw di say de luk, di we aw i klia, di we aw i de shayn, ɛn di we aw pɔsin kin si di print.
Layer bonding, ed adheshon, bɔbul, ɛn delamination.
Kad flat, bɛnd, torsion, ɛn mɛkanikal hanlin.
Chip ridin, ɛnkɔdin, mɛmori, ɛntena, ɛn rida kɔmpatibiliti.
Aplikeshɔn-spɛsifi k durabiliti, envayrɔmɛnt, ɛn ol tɛst usay dɛn nid.
Wallis de sɔpɔt kɔstɔmayz PETG ɔvlay ɛn PET inlay prodakshɔn fɔ protɔtayp, payɔt ɔda, schedul bɔlk ɔda, ɛn lɔng tɛm kad-matirial saplai program.
Prodakshɔn kɔdineshɔn kin inklud matirial pripiamɛnt, kɔt, kɔt shit, ɛntena mek, chip bonding, inlay asɛmbli, ilɛktrik inspekshɔn, shit-layout kɔntrol, pak, lɛbl, ɛn ɛkspɔt dɔkyumentri.
PETG Ovlay Prodakshɔn
PET Inlay Manufakchurin we dɛn de mek
Apat frɔm di kɔt ɔvlay ɛn RFID inlay matirial dɛn, Wallis kin kɔdinɛt rilayt PET, PETG, PVC, polycarbonate, kɔr shit, printabl shit, magnɛtik strɛp ɔvlay, ɛn kɔmpɔzit kad-matirial rikwaymɛnt dɛn.
PET Sheet fɔ mek kad
PET Kad Kor Matirial
PETG ɔvlay sɔfays fɔ protɛkt frɔm dɔst, skrach, mɔstɔ, bɛnd, finga prɛnt, ɛn kɔntaminɛshɔn. RFID inlays nid bak fɔ protɛkshɔn agens prɛshɔn we pasmak, ɔt we dɛn nɔ kɔntrol, statik dischaj, kɔmpɔnɛnt damej, ɛn kɔndishɔn we nɔ fayn fɔ kip.
Klin PE film ɔ protɛktiv insay wrap.
Kraft pepa we nɔ de mek wata ɔ pak we dɛn sial.
Flat katon, bɔks we dɛn dɔn riinfɔs, wud kes, ɔ palet pak.
Kɔna ɛn edj protɛkshɔn fɔ ridyus difɔmeshɔn.
Separeshɔn sheet fɔ protɛkt chips, ɛntena, ɛn fim sɔfays.
Lot nɔmba, matirial, tiknes, chip, frikshɔn, layout, ɛn ɔriɛnteshɔn lɛbl dɛn.
Customized OEM labels, shiping mak, ɛn pak list.
Stɔr di tin dɛn we dɛn dɔn sial insay dɛn fɔs pak na say we klin, dray, ɛn we dɛn kin kɔntrol di tɛmpracha. Kip dɛn fa frɔm dairekt san layt, strɔng ɔt sɔs, pasmak humidity, ebi lod, dɔst, ɛn kemikal dɛn we de rɔtin.
Wallis Kad Material Wearhouse
Wallis de wok wit kad manifakta, RFID kɔnvɔta, smat kad faktri, sikyɔriti printa, distribyushɔn, pɔsnalayzeshɔn sɛnta, ɛn OEM kɔstɔma dɛn we nid kɔstɔmayz ɔvlay ɛn inlay matirial.
Wan-stɔp PETG ɔvlay, PET kɔr, RFID inlay, ɛn kad-matirial sɔs.
Plɛn PET, ɛntena-onli, RFID prɛ-inlay, ɛn prɛlaminɛt inlay opshɔn dɛn.
Kastomayz LF, HF, NFC, UHF, ɛn dual-frikyuɛnsi projɛkt dɛn.
Chip, antena, tik, sheet saiz, ɛn kad layout we dɛn kɔstɔmayt.
Opshɔn dɛn we dɛn kɔt, strɔng-kɔt, mat, frɔst, lɛsa, ɛn magnɛtik ɔvlay opshɔn dɛn.
Prototype ɛn sampul sɔpɔt fɔ lamination ɛn rida tɛst.
Kwaliti inspekshɔn, lɔt traysabiliti, ɛkspɔt pak, ɛn OEM lɛbl.
Send Wallis yu finish-kad strɔkchɔ, matirial, tik, sheet layout, RFID frikshɔn, chip, ɛntena, printin we, rida infɔmeshɔn, ɛstimat kwantiti, ɛn dilivri dɛstineshɔn.
Rikwest fɔ gɛt Kastɔm KɔteshɔnPETG ɔvlay na nɔmal wan di transparent protɛktiv layt na di frɔnt ɔ bak pan wan laminated kad. PET inlay na intanɛnt strɔkchɔral ɔ fɛnshɔnal layt ɛn i kin gɛt RFID chip ɛn ɛntena.
Nɔ, PET inlay kin bi klin strɔkchɔral kɔr we nɔ gɛt ilɛktronik, inlay we na ɛntena nɔmɔ, chip ɛn antena prɛ-inlay, ɔ kɔmplit RFID prɛlamin inlay. Di wan dɛn we de bay fɔ sho di kayn we we dɛn nid.
PETG ɔvlay de frɔm lɛk 0.04mm to 0.15mm. Kɔmɔn opshɔn dɛn inklud 0.06mm, 0.08mm, ɛn 0.10mm, we dɛn kin ebul fɔ evalyu di tik we dɛn kɔstɔmayz akɔdin to di kad strɔkchɔ.
Yɛs. PET inlay tiknes fɔ pik akɔdin to di chip, ɛntena, kad layers, finish-kad tiknes, lamination prɔses, ɛn mɛkanikal rikwaymɛnt dɛn.
Projek opshɔn dɛn kin inklud 125kHz LF, 13.56MHz HF ɔ NFC, UHF, ɛn dual-frikyuɛnsi kɔnfigyushɔn dɛn. Di we aw i go de, dipen pan di chip we yu dɔn pik, ɛntena, layout, kwantiti, ɛn aw fɔ yuz am.
Yɛs. Gi di rayt chip nem, di wan we mek am, di mɛmori, di protɔkɔl, di sikyɔriti we dɛn nid, di rida mɔdel, ɛn di volyum we dɛn kin gɛt ɛvri ia. Wallis kin evaluate avaylabl ɛn inlay kɔmpatibiliti.
Kɔpa waya ɛn etched aluminiɔm ɛntena opshɔn dɛn kin evalyu. Di kɔrɛkt dizayn dipen pan frikshɔn, chip kapasiti, kad dimɛnshɔn, rid distans, prodakshɔn we, ɛn kɔst target.
Miks-matirial strɔkchɔ kin pɔsibul we di kɔtin, ink, sɔftin tɛmpracha, shrinkage, prɛshɔn, ɛn kol kɔndishɔn dɛn kɔmpitabl. Sampul tɛst nid fɔ de bifo bɔku bɔku prodakshɔn.
I kin pɔsibul fɔ print wit fayn say we dɛn dɔn trit ɔ we pɔsin kin print. Di ink, di we aw dɛn de mɛn am, di say we dɛn print am, di sayd we dɛn de bond, di transparency, ɛn di lamination kɔmpatibiliti fɔ tɛst.
Yɛs. Yu kin kɔstɔmayz di kad kwantiti fɔ ɛni sheet, di dimɛnshɔn fɔ di shit, di ɛntena pozishɔn, di chip pozishɔn, di mak dɛn we dɛn kin rɛjista, di say dɛn we dɛn kin panch, ɛn di we aw dɛn kin ɔriɛnt di kad akɔdin to wan drɔin we dɛn dɔn gri fɔ.
Test kin inklud antena kɔntinyuiti, rɛsistɛns, chip bondin, chip aydentifikeshɔn, rida kɔmyunikeshɔn, UID ridin, mɛmori akses, ɛnkɔdin, sheet layout, tiknes, ɛn vijual inspekshɔn.
Nɔ, sikyɔriti dipen pan di chip we yu dɔn pik, di we aw dɛn de ɔthɛntishɔn, ɛnkripshɔn, ki dɛn, rida kɔnfigyushɔn, bakɛnd softwe, kredibiliti manejmɛnt, kad pɔsnalayzeshɔn, ɛn ɔl di sistɛm dizayn.
PET ɛn PETG matirial dɛn kin bi risaykul tru fayn kɔlɛkshɔn ɛn prɔsesin sistɛm dɛn. Bɔt, di kad we dɔn dɔn risaykul dipen pan di kɔtin, ink, adeziv, chip, ɛntena, magnɛtik strɛp, miks polima, ɛn lokal risaykul infrastukchɔ.
Yɛs. Dɛn kin rikɔmɛnd fɔ mek dɛn du sampul ɛn payɔt tɛst fɔ chɛk if dɛn print, di kɔtin adheshon, layt bon, kad flat, chip ridin, ɛntena pefɔmɛns, panch, pɔsnalayzeshɔn, ɛn rida kɔmpatibiliti.
Duya gi di ɔvlay matirial, tik, sɔfa, kɔtin, inlay tayp, shit dimɛnshɔn, kad layout, frikshɔn, chip, ɛntena, printin we, rida, ɛstimat kwantiti, pak, ɛn dilivri dɛstineshɔn.
