|
Wallis - PVC sheet
Wallis bin de tɔk bɔt am
PVC sheet
| Kɔlɔ: | |
|---|---|
| Kwantiti: . | |
Wallis de saplae anti-stik mat wata-resistant printabl PVC sheet fɔ kɔmɛshɔnal printin, kad manufakchurin, sayn, displei, pak kɔmpɔnɛnt, tɛmfɔmin ɛn ɔda OEM aplikeshɔn dɛn. Di mat surface de gi low-glare apinans, we di anti-blocking characteristic de ɛp fɔ ridyus di surface-to-surface sticking we yu nɔ want we dɛn de stak, handel ɛn daunstrim prɔsesin.
Klia, wayt, rɛd, blak ɛn kɔstɔmayt kɔlɔ opshɔn dɛn de insay sheet ɔ rol fɔmat. Tiknes frɔm lɛk 0.12 mm to 5 mm ɛn bɔku standad ɔ kɔstɔmayz dimɛnshɔn dɛn kin tɔk bɔt akɔdin to printin ikwipmɛnt, finish-prɔdakt strɔkchɔ ɛn prodakshɔn rikwaymɛnt.
Printable PVC fɔ ɔltɛm mach wit di aktual printin prɔses. Inkjet, laser ɔ dry-toner, UV dijital ɛn skrin printin sistem kin nid difrɛn sɔfayz tritmɛnt, ink kemistri ɛn prɔsesin kɔndishɔn. Wallis rεkomεnd fכ kכnfכm di printa mכdel, ink כ tכna sistεm εn dכwnstrim prכsεs tru sεmpl tεst bifo bכlk prodakshכn.
Anti-stik mat printabl PVC shit na rigid ɔ sɛmi-rigid polyvinyl klorayd sabstret we dɛn mek fɔ print ɛn kɔnvɔyt aplikeshɔn dɛn we nid fɔ gɛt nɔ-glos sɔfays, kɔntrol hanlin pefɔmɛns ɛn rɛsistɛns to ɔdinari mɔstɔ.
di tεm anti-stika insay dis prodakt kכntεks de tכk bכt fכs fכ wan anti-blכk sεf . We dɛn kin stak plastic sheet dɛn ɔnda prɛshɔn, ɔt ɔ we dɛn kin kip fɔ lɔng tɛm, di say dɛn we smɔl kin gɛt di abit fɔ klem togɛda. Wan mat anti-blɔk sɔfays de ɛp fɔ mek di sheet separeshɔn ɛn handel bɛtɛ we dɛn de print, fid, kɔt ɛn ɔda prodakshɔn ɔpreshɔn.
Dis difrɛn frɔm wan adhesive ɔ self-adhesive PVC film. Di anti-sticky characteristic nɔ min se di matirial insɛf na stika we dɛn kin pul ɔ di prɔdak dɛn we dɛn mek wit adhesive-backed we dɛn mek wit am nɔ go lɛf ɛni rɛsɛdyu ɔtomɛtik wan.
Wallis de gi printabl PVC insay bɔku tiknɛs, kɔlɔ, shit dimɛnshɔn ɛn rol wit. Faynal printabl gred ɛn sɔfayz tritmɛnt fɔ kɔnfɔm togɛda wit di printin teknɔlɔji we dɛn nid.
| Sɔntin | Anti-Stik Mat Wata-Resistant Printable PVC sheet |
| Tin dɛn | PVC |
| Kɔlɔ | Klia, wayt, rɛd, blak ɛn ɔda kɔlɔ dɛn we dɛn kɔstɔmayt |
| Fɔm fɔ di Sapɔt | Sheet ɔ rol |
| Tik we i tik | Na lɛk 0.12–5 mm; printable-grade availability dipen pan di printin prɔses we dɛn nid |
| Standart Shit Sayz dɛn | 700 × 1000 mm, 1000 × 2000 mm, 1220 × 2440 mm ɛn saiz dɛn we dɛn kɔstɔmayt |
| Rol Width we yu de yuz | 580 mm, 600 mm, 800 mm ɛn kɔstɔmayz wit dɛn dɔŋ 1280 mm, sɔbjɛkt to spesifikeshɔn kɔnfɔmeshɔn |
| Sho | Mat, low-glare, anti-blɔk printabl sɔfays |
| Fɔ print | Inkjet, dijital, laser / dry-toner ɔ ɔda printin gred dɛn we de ɔnda printa ɛn kɔtin kɔmpitibliti |
| Di we aw dɛn de du di wok | Printin, day kɔt, vaykum fɔm, thermoforming ɛn projɛkt-spɛsifi k kɔnvɔyt |
| Kastamayzeshɔn | Tik, dimɛnshɔn, kɔlɔ, say we yu kin print, sheet / rol fɔmat ɛn pak |
| Di Tayp fɔ Baya | Printin kɔmni dɛm, kɔnvɔta dɛm, kad mek dɛm, displei prodyusɔ dɛm, importa dɛm, distribyushɔn dɛm ɛn OEM faktri dɛm |
Wan anti-blɔk sɔfa de ɛp fɔ ridyus di kɔntakt we pasmak bitwin stak PVC shit dɛn. Dis kin mek am izi fɔ separet wan wan sheet dɛn we dɛn de handle wit yu an ɔ we dɛn de mek ɔtomɛtik.
We yu stik frɔm shit to shit, dat kin mek yu nɔ ebul fɔ gi tin fɔ it ɛn fɔ ol am. Wan kɔntrol mat sɔfays kin ɛp fɔ ridyus dis risk, pan ɔl we fɔ fid we pɔsin kin abop pan kin dipen bak pan di tik we di shit tik, di flatnɛs, di statik ilɛktrishɔn ɛn di patikyula printa fid mɛkanism.
Mat PVC de difyuz layt we de riflɛkt pas wan ay-glos sɔfays, we de mek wan saf vijual apinans we kin yusful fɔ sayn, infɔmeshɔn panɛl, print kɔva ɛn ɔda aplikeshɔn dɛn we dɛn de si ɔnda strɔng layt.
Mat surfaces jεnarali mek finga prεnt εn sכm sכm hεndlin mak dεm nכ de fכ si bכku pas surface dεm we dεn polish bכku, we kin yusful fכ prכdak dεm we dεn de hεndεl bכku tεm.
Wan printin-grɛd PVC sɔfays kin gi mɔ rilaybl ink ɔ toner transfa pas nɔ fayn jenɛral-pɔpɔs plastic. Di kɔrɛkt gred de ɛp fɔ sɔpɔt klia tɛks, grafik, foto ɛn kɔlɔ eria dɛn we dɛn mach wit di printin prɔses we dɛn bin want fɔ print.
PVC nɔ de absɔb mɔstɔ di sem we lɛk pepa, we de mek i yusful fɔ print prodak dɛm we nid bɛtɛ rɛsistɛns to ɔdinari humidity, splash ɔ wet handling.
Bɔt, wan PVC sabstret we nɔ de mek wata nɔ de mek di pikchɔ we dɛn print nɔ de mek wata pas . Finish print resistance dipen pan di ink ɔ toner, printable coating, curing ɔ drying kɔndishɔn ɛn ɛni protective laminate ɔ coating we dɛn put afta dɛn print.
PVC de gi wan plastic bays we de te fɔ aplikeshɔn usay pepa sabstret nɔ kin gi inɔf rɛsistɛns to mɔstɔ, bɛnd ɔ fɔ handel ɔltɛm.
Tin PVC kin yuz fɔ print insɛt, kad matirial ɔ fleksibul kɔmpɔnɛnt, we tik sheet kin gi big rigiditi fɔ displei, fɔm prodak ɛn ɔda fabricated aplikeshɔn.
Dipen pan di gred ɛn tik we yu dɔn pik, dɛn kin print PVC ɛn afta dat dɛn kin kɔt am, day-kɔt am, fɔm am ɔ mek am to kɔmpɔnɛnt dɛn we dɔn dɔn. Di kɔmplit prodakshɔn sikyud fɔ evalyu bifo bɔku aprɔval.
'Printable PVC ' nɔ fɔ trit am lɛk yunivasal kɔmpitibliti klem. Difrɛn printin teknɔlɔji dɛn nid difrɛn midia prɔpati dɛn, ɛn wan sheet we dɛn dɔn ɔptimayz fɔ wan sistem nɔ kin gi di sem pefɔmɛns na ɔda sistem.
| Printin Method | PVC Rikwaymɛnt | Ki Chɛk |
|---|---|---|
| Inkjet we gɛt wata | Ink-risɛptiv kɔtin we mach wit day ɔ pigmɛnt ink | di tik we di fid tik, di dray, di ink we de adheshon, di kכla dεnsiti εn di wata we de fast |
| UV Inkjet we dɛn kin yuz | Surface kompitibul wit UV -curable ink | Ink adheshon, UV curing, surface enaji, flatnes εn dכwnstrim fכm |
| Laser / Dray Toner we yu kin yuz | Dediket ɔt-kɔmpatibl printabl PVC gred | Printa aprɔval, fiuza tɛmpracha, shit difɔmeshɔn, toner adheshon ɛn fidin |
| Fɔ Print na Skrin | Surface treatment matched to skrin-printin ink | Ink kemistri, adheshon, drying / curing ɛn fɔm rikwaymɛnt dɛn |
Wata-based inkjet printin jεnarali nid fכ rεsεptiv sεf kכt biכs PVC we dεn nכ trit gεt lכw absכbεnsi. Day ɛn pigmɛnt ink dɛn kin biev difrɛn we bak, so di wan dɛn we de bay fɔ gi di printa mɔdel ɛn di kayn ink bifo dɛn pik di tin we dɛn go yuz fɔ print.
Fɔ print lɛsa ɛn dray-tɔna nid fɔ tek tɛm bikɔs di we aw dɛn de print kin mek di tɛmpracha go ɔp we dɛn de fiks di tona. Na wan PVC gred nɔmɔ we dɛn spɛshal fɔ evalyu fɔ di printa ɛn di tɛmpracha kɔndishɔn dɛn we dɛn want fɔ yuz.
Nɔ put PVC sheet we nɔ spɛsifa insay laser printa jɔs bikɔs dɛn diskrayb di matirial as 'printable.' Kɔnfɛm se di ikwipmɛnt manifakta alaw di midia tayp ɛn se dɛn dɔn tɛst di PVC gred fɔ di prɔses we dɛn bin want.
UV flatbed printin kin fayn fɔ rigid PVC aplikeshɔn dɛn lɛk sayn ɛn displei panɛl we dɛn kɔntrol di sɔfa ɛnaji, ink adheshon, di kɔndishɔn fɔ kɔrɛkt ɛn di sheet flatnɛs fayn fayn wan.
Wata resistans fɔ evaluate na tu difrɛn lɛvɛl: di PVC sabstret insɛf ɛn di finish print imej.
PVC na plastic sabstεrayt εn dat mek i de gi bכku bכku rεsistεns to כdinari wata εkspכzכn pas pepa. Dis kin mek i fayn fɔ di prɔdak dɛn we de na di humidity, splash ɔ fɔ klin am bak.
Di grafik we dɛn print kin du difrɛn frɔm di bays PVC . wan ink we de bays insay wata, rεsεptiv kכt כ ink layεr we nכ kכl infεkt kin stil afekt wit wata pan כl we di כndalayn PVC nכ chenj.
Fɔ aplikeshɔn dɛn we nid fɔ mek dɛn nɔ gɛt mɔs, di wan dɛn we de bay fɔ tɛst di aktual print sampul yuz di ink we dɛn want, di kɔndishɔn fɔ drɛy ɛn ɛni laminat ɔ protɛktiv kɔtin. Wet rɔb, wata-drɔp ɛn imɛshɔn tɛst dɛn kin difayn akɔdin to di finish-prɔdakt rikwaymɛnt.
Mat printable PVC kin yuz fɔ indo sayn, infɔmeshɔn bod, rital grafik, ɛgzibishin displei ɛn prɔmoshɔnal panɛl usay dɛn kin lɛk fɔ gɛt lɔw-glare sɔfays.
Ritayl displei manifakta dɛn kin print grafik dɛn dairekt pan kɔmpatibl PVC sheet dɛn ɛn afta dat dɛn kin kɔt ɔ mek dɛn insay prɔmoshɔnal panɛl dɛn, displei kɔmpɔnɛnt dɛn ɛn tɛmporari makɛt fiks dɛn.
Tin gred dɛn we dɛn kin print kin evalyu fɔ kad kɔmpɔnɛnt dɛn, print insɛt dɛn, mɛmbaship-kad matirial dɛn ɛn ɔda laminated ɔ kɔnvɔyt plastic prodak dɛn. Di tik we dɛn nid ɛn di say we dɛn kin print fɔ mach wit di we aw dɛn de mek kad.
Mat PVC kin tink bɔt fɔ print kɔva, mɛnyu, infɔmeshɔn shit ɛn ɔda dɔkyumɛnt dɛn we dɛn kin ol bɔku tɛm usay dɛn kin lɛk fɔ mek plastic te ɛn fɔ mek i nɔ gɛt mɔstɔ pas kɔvɛnshɔnal pepa.
Dɛn kin print PVC gred dɛn we dɛn dɔn pik ɛn afta dat dɛn kin day-kat, fɔm wit vaykum ɔ fɔm am insay pak kɔmpɔnɛnt dɛn, protɔtayp ɔ ɔda pat dɛn we dɛn mek. Dɛn fɔ tɛst di ink we kin chenj ɛn di we aw i kin adhe if di say we dɛn print go fɔm afta dɛn dɔn print am.
Start bay we yu no if di PVC go print bay akyu inkjet, UV inkjet, laser / dray toner, skrin printin ɔ ɔda prɔses. Dɛn fɔ pik di we aw dɛn de trit di say we dɛn de print akɔdin to di we aw dɛn de print am pas fɔ tek am se wan gred de wok fɔ ɛni printa.
Printa fid pat, maksimal midia tik, ink sistem, we fɔ mɛn ɛn di tɛmpracha kɔndishɔn dɛn kin difrɛn. We yu gi di rayt brand ɛn di mɔdel, dat kin ɛp fɔ no if di tik ɛn di say we yu dɔn pik fayn.
Tin PVC de gi big fleksibiliti ɛn i kin fayn fɔ kad kɔmpɔnɛnt dɛn, insɛt ɔ fleksibul print pat dɛn. Big tiknes de gi adishɔnal rigiditi fɔ displei, panɛl ɛn fabricated kɔmpɔnɛnt dɛn.
Yu fɔ chɛk di printa in midia-tiknɛs limiteshɔn ɔltɛm bifo yu ɔda. Wan PVC tik we de wok fɔ mek tin kin tu tik fɔ wan patikyula printin divays.
Shit-fed printin, flatbed printin ɛn rol-to-rol prodakshɔn nid difrɛn fɔmat dɛn. Gi di lɔng, waid, rol wit ɛn prodakshɔn ikwipmɛnt ditil dɛn we yu nid we yu de aks fɔ matirial.
Wan kad kɔmpɔnɛnt, ɔda sayn, displei panɛl ɛn thermoformed pakej ɔl kin nid difrɛn tiknes, print sistem ɛn pefɔmɛns prɔpati. So dɛn fɔ difayn di tin we dɛn dɔn mek bifo dɛn pik di tin we dɛn go yuz fɔ mek di tin.
Infɔm Wallis if di matirial go bi laminated, day-cut, vacuum formed, thermoformed, folded ɔ ɔda we fɔ prosɛs am. Di say we dɛn kin print ɛn di ink layt fɔ kɔntinyu fɔ kɔmpit wit di kɔmplit prodakshɔn wokflɔ.
| Ficha | Mat PVC | Glɔsi PVC |
|---|---|---|
| Aw a luk | Low-glare, i de luk saf | Riflɛktiv, ay-shayn apinans |
| Finga prɛnt we pɔsin kin si | Jɛnɛral wan nɔ kin notis so | Mɔ we yu kin si pan say dɛn we dɛn dɔn polish bad bad wan |
| Di Kɔndishɔn dɛn fɔ Layt | Yuzful usay riflekshɔn fɔ ridyus | Yuzful usay dɛn kin lɛk fɔ gɛt ay vijual glos |
| Fɔ print | Dipen pan mat printable tritmɛnt ɛn ink sistem | I nid fɔ gɛt kɔmpitabl sɔfayz tritmɛnt ɛn adheshon tɛst |
| Tipik Aplikeshɔn dɛn | Sayn dɛn, infɔmeshɔn panɛl dɛn, kad dɛn, kɔva dɛn, displei dɛn | Premium grafik, dɛkɔretiv displei ɛn ay-glos prɛzɛntɛnshɔn |
Nɔn pan dɛn tu finish ya nɔ bɛtɛ ɔlsay na di wɔl. Di kɔrɛkt chukchuk dipen pan di we aw pɔsin de si, di tɛknɔlɔji we dɛn de print, di layt ɛnvayrɔmɛnt, di tin dɛn we dɛn nid fɔ handle ɛn di prɔses we dɛn de du dɔŋ di strim.
Wallis PVC shit kin saplae bak fɔ vaykum fɔm, tɛmfɔmin ɛn day-kat aplikeshɔn. If dɛn go print di sheet bifo dɛn fɔm am, di printin sistem ɛn di ink fɔ telɛ di difɔmeshɔn ɛn tɛmpracha we de insay di fɔm prɔses.
Print bifo thermoforming kin alaw grafik fɔ bi pat pan di finish fɔm prodak. כltu, ink strεch, kכla chenj, krak krak εn adheshon fכ tεst na di εkspεkt fכm dip.
Di statin gej fɔ pik akɔdin to di fayn kɔmpɔnɛnt dip, rigiditi, fɔm rɛtɛshɔn ɛn prodakshɔn prɔses. Dɔn dɛn fɔ kɔnfɔm se di printin kɔmpitibliti na di tik we yu dɔn pik.
Fɔ print thermoformed prodak, tɛst di kɔmplit sikyud yuz prodakshɔn-ikwivalɛnt matirial, ink, kɔring, ɔt ɛn fɔm sɛtin bifo yu apruv bɔlk matirial.
B2B kɔstɔma dɛn kin nid spɛsifikɛshɔn dɛn we difrɛn frɔm standad stok. Wallis kin tɔk bɔt kɔstɔmayz matirial kɔnfigyushɔn akɔdin to di kɔstɔma in prodakshɔn ikwipmɛnt ɛn finish-prɔdakt rikwaymɛnt dɛn.
Spɛsifik di nominal tiknɛs we dɛn nid, tolɛreshɔn ɛn di aplikeshɔn we dɔn dɔn. Printable-grade avaylabl fɔ kɔnfyus fɔ di gej we dɛn nid.
Di kɔstɔm we dɛn mek fɔ kɔt kin ɛp fɔ mek di printa bed dɛn, di layout dɛn we dɛn kin put insay, fɔm tul dɛn ɔ di dimɛnshɔn dɛn we dɛn kin yuz fɔ mek di tin dɛn we dɛn dɔn mek, ɛn di tin dɛn we dɛn kin west we nɔ nid fɔ mek dɛn, mach.
Rol width kin diskus fɔ kɔmpitabl prodakshɔn ikwipmɛnt. Di wan dɛn we de bay fɔ gi di wit we dɛn nid, di lɔng we di rol lɔng, di kɔr dimɛnshɔn ɛn di infɔmeshɔn bɔt di printin ɔ kɔnvɔyt-mashin.
Wi kin tɔk bɔt klia, wayt, rɛd, blak ɛn ɔda kɔlɔ dɛn. Printin rizulyt pan transparent ɔ kala sabstret difrɛn frɔm wayt PVC , so dɛn fɔ tɛst di artwok ɛn ink kɔnfigyushɔn dɛn akɔdin to dat.
Gi di printa, ink ɔ tona ɛn printin prɔses so dat Wallis kin ebul fɔ evalyu di sɔfays we dɛn nid pas fɔ saplae wan jenɛrik 'printable' PVC spɛsifikɛshɔn.
Sampul tɛst impɔtant mɔ fɔ printabl plastic bikɔs saksesful prodakshɔn dipen pan di intarakshɔn bitwin di PVC sɔfa, printa, ink ɔ tona, envayrɔmɛnt kɔndishɔn ɛn daunstrim kɔnvɔtin prɔses.
Chek if di PVC tiknes we yu pik de fid smol smol witout double fiding, skewing, excessive static lektrisiti or intaferens wit di printhed o transpot pat.
Evaluate adhesion afta di nכmal drying, curing כ toner-fixing saykl. Dɛn fɔ tɛst di printin bak afta ɛni tɛm we dɛn nid fɔ kondishɔn.
If di mɔstɔ rɛsistɛns impɔtant, tɛst di pikchɔ we dɛn print pas fɔ jɔs di wan we nɔ print PVC . Di tɛst kin inklud wata drɔp, wet rɔb ɔ fɔ lɔng tɛm dipen pan di aplikeshɔn.
Evaluate cutting, die cutting, lamination, folding, thermoforming ɔ ɔda dawɔnstrim prɔses dɛn yuz di aktual print matirial bifo yu apruv wan big prodakshɔn ɔda.
Fɔ gi kɔmplit tɛknikal ditil dɛn de ɛp Wallis fɔ ebul fɔ no di rayt matirial gred ɛn fɔ pripia wan kot we kɔrɛkt mɔ.
Gi di printa brand ɛn di rayt mɔdel, inklud if na akyu inkjet, UV inkjet, laser / dray toner, skrin printin ɔ ɔda teknɔlɔji.
Inklud di ink kemistri ɔ tona sistɛm ɛnitɛm we i pɔsibul, lɛk day, pigmɛnt, UV -kyurabl ɔ printa-spɛsifi k kɔnsumabl.
Spɛsifik di PVC tik, shit lɔng ɛn wit ɔ rol wit we yu nid. Inklud tolerans if di matirial go rɔn tru ɔtomatik ikwipmɛnt.
Kɔnfɛm di kɔlɔ we yu nid ɛn if di sɔfa fɔ gɛt mat anti-blɔk apinans ɔ ɔda prɔjek-spɛsifi k finish.
Tɛl Wallis if dɛn go yuz di tin fɔ mek kad, sayn, displei, kɔva we dɛn print, tin dɛn fɔ pak, pat dɛn we dɛn mek wit vaykum ɔ ɔda tin we dɛn dɔn mek.
Inklud ɛni laminɛshɔn, kɔt, day kɔt, vaykum fɔm, tɛmɔfɔm ɔ ɔda prɔsesin stɛp dɛn.
Gi di initial sampul rikwaymɛnt, trayal ɔda kwantiti, ɛkspɛkt bɔlk kwantiti ɔ rɛgyula pɔchɛshɔn volyum so dat dɛn go ebul fɔ evaluate prodakshɔn ɛn pak di rayt we.
Printable PVC fɔ protɛkt frɔm dɔst, kɔntaminɛshɔn, ɔt pasmak ɛn difɔmeshɔn we dɛn de kip ɛn transpɔt. Dɛn kin arenj di sheet ɛn rol pak akɔdin to di prɔdak dimɛnshɔn, tik, kwantiti ɛn ɛkspɔt rikwaymɛnt.
Fɔ printin aplikeshɔn, fɔ kip di matirial surface klin ɛn flat bifo yu yuz am de ɛp fɔ ridyus prodakshɔn prɔblɛm dɛn lɛk fɔ it fayn, sɔfays dɛfɛkt ɛn printin nɔ kɔnsistɛns.
Insay dis aplikeshɔn, anti-stik de tɔk mɔ bɔt anti-blɔk pefɔmɛns. Di mat surface de ɛp fɔ ridyus di sheet-to-sheet stik we yu nɔ want we dɛn de stak, handel ɛn prosɛs. I nɔ min se di PVC na prɛshɔn-sɛnsitiv adeziv ɔ stika matirial we dɛn kin pul.
Di PVC sabstret insɛf de gi gud rɛsistɛns to ɔdinari mɔstɔ ɛn wata ɛksplɔshɔn, bɔt di pikchɔ we dɛn dɔn print kin gɛt difrɛn wata rɛsistɛns. Ink, toner, printable coating, drying ɛn ɛni protɛktiv laminat fɔ tɛst togɛda.
Nɔ tek am se wan PVC gred na ɔptimayz fɔ ɔl tu di prɔses dɛn. Inkjet printin kin nid fɔ gɛt ink-rɛseptiv kɔtin, we laser ɔ dray-tɔna printin nid midia we go ebul fɔ telɛ di ikwipmɛnt in fid ɛn toner-fiksin kɔndishɔn. Kɔnfɛm di rayt printa bifo yu ɔda.
Ɔdinari PVC nɔ fɔ de na laser printa we dɛn nɔ kɔnfɔm se matirial ɛn ikwipmɛnt kɔmpitibliti. Laser ɛn dray-tɔna sistem kin mek di midia de na ay ples, so dɛn nid fɔ gɛt gred we dɛn gi yu ɛn dɛn nid fɔ gɛt aprɔval fɔ printa.
Wallis PVC shit prodakshכn de kכba lεk 0.12 mm to 5 mm. Bɔt di we aw dɛn kin print di gred kin difrɛn akɔdin to di we aw dɛn trit di say we dɛn de print, di printa ɛn di we aw dɛn yuz am, so dɛn fɔ kɔnfyus di tik we dɛn nid togɛda wit di we aw dɛn de print.
Di kɔmɔn prodakshɔn fɔmat dɛn inklud 700 × 1000 mm, 1000 × 2000 mm ɛn 1220 × 2440 mm. Dɛn kin tɔk bak bɔt di dimɛnshɔn dɛn we dɛn dɔn kɔstɔmayt akɔdin to di tin dɛn we di printa ɛn kɔnvɔyt nid.
Yɛs. Sheet ɛn rol fɔmat dɛn de. Tipik rol wit dɛn inklud 580 mm, 600 mm ɛn 800 mm, wit ɔda kɔstɔmayz wit dɛn we de ɔnda matirial ɛn prodakshɔn rikwaymɛnt dɛn.
Yɛs. Wi kin tɔk bɔt klia, wayt, rɛd, blak ɛn ɔda kɔlɔ dɛn. Dɛn fɔ tɛst di we aw di printin de wok ɛn aw di kɔlɔ de bi bikɔs di grafik dɛn kin biev difrɛn we pan transparent, dak ɔ kɔlɔ sabstret dɛn.
Nɔn pan dɛn tu finish ya nɔ bɛtɛ ɔlsay na di wɔl. Mat surface de gi low glare ɛn kin ridyus di finga prɛnt we pɔsin kin si, we glossy surface de mek i luk ay-shayn. Printability dipen mɔ pan di surface tritmɛnt ɛn kɔmpatibiliti wit di ink ɔ toner we yu dɔn pik.
PVC gred dɛn we dɛn dɔn pik kin bi tɛmfɔm ɔ vaykum fɔm, bɔt aplikeshɔn dɛn we dɛn print nid fɔ tɛst. ink adheshon, elongation, krak, kכla chenj εn surface apinεns fכ evaluate yuz di aktual fכm kכndishכn dεm.
Aw fɔ fit fɔ de na do dipen pan di ɛksaktɔl PVC gred, ink ɔ toner, UV ɛksplɔshɔn, tɛmpracha, mɔstɔ, abrashɔn ɛn di savis layf we dɛn de ɛkspɛkt. Wata resistans nɔmɔ nɔ de pruv se i kin te fɔ lɔng tɛm na do, so dɛn fɔ tɛst di tin dɛn we dɛn kin yuz na do apat frɔm dɛnsɛf.
Lamination kin bi kɔnsidɛrɛd fɔ fayn aplikeshɔn fɔ impɔtant print-sɔfas protɛkshɔn ɔ modify di finished apinans. Adheshon, temperechur, prεshכn εn ink kompitibiliti fכ tεst wit di komplit mεtirial strכkchכ.
Yɛs. I fayn fɔ tɛst sampul bifo yu bay bɔku bɔku wan, mɔ we di printa kɔmpatibiliti, ink adheshon, wata rɛsistɛns, tik, fɔm ɔ daunstrim kɔnvɔyt pefɔmɛns impɔtant.
Duya gi di printa brand ɛn mɔdel, di printin prɔses, ink ɔ toner tayp, tik we dɛn nid, di sheet ɔ rol dimɛnshɔn, kɔlɔ, di sɔfa we dɛn nid, di las aplikeshɔn, di dawtstrim prɔsesin ɛn di ɛstimat ɔda kwantiti.
Send Wallis yu printa model, ink ɔ toner sistem, tik we yu nid, dimɛnshɔn, kɔlɔ, fayn aplikeshɔn ɛn ɛstimat kwantiti we yu bay. Wi kin tɔk bɔt anti-stik mat printabl PVC gred fɔ kɔmɛshɔnal printin, kɔnvɔyt, fɔm ɛn OEM prodakshɔn.
If yu nɔ shɔ us matirial spɛsifikɛshɔn we fit, gi yu kɔrɛnt PVC sampul ɔ diskrayb di prodakshɔn prɔses. Dɛn kin arenj fɔ mek sampul printin ɛn dawɔnstrim prɔsesin tɛst bifo dɛn gi bɔku aprɔval.
