Ofset Printing PETG Sheet Fɔ ID IC Kad Mek-WallisPlastik

1. Introdukshɔn

Insay di wɔl fɔ ID IC kad prodakshɔn, di kwaliti fɔ di matirial dɛn we dɛn yuz de ple impɔtant pat pan di fayn prodak in durabiliti ɛn aesthetics. Ɔfset printin PETG sheet dɛn dɔn gɛt rɛkɔgnishɔn fɔ dɛn ɛksɛpshɔn atribyut dɛn, we mek dɛn bi wan prɛferɛd choice fɔ ID IC kad manufakchurin.

2.Ɔndastand Ɔfset Printin

Ɔfset printin na wan we we pipul dɛn lɛk fɔ print, we na fɔ transfa pikchɔ we gɛt ink frɔm plet to rɔba blankit ɛn afta dat dɛn kin put am na di say we dɛn de print. Dɛn no am fɔ di ebul we i ebul fɔ mek shap ɛn fayn fayn pikchɔ dɛn wit kwaliti we nɔ de chenj. Di ɔfset printin prɔses de yuz bɔku bɔku wan na difrɛn industri dɛn, lɛk fɔ pak, makɛt matirial, ɛn naw, fɔ mek ID IC kad.

3.Ɔndastand PETG Shit dɛn

PETG (Polyethylene Terephthalate Glycol) na wan tεmכplastik polimכr we de sho aw i klia, i taf, εn i de rεsist fכ kεmikכl. Dɛn kin yuz am bɔku say dɛn fɔ du difrɛn tin dɛn, lɛk fɔ pak, sayn, ɛn fɔ mek ID IC kad. PETG sheet dɛn de gi fayn fayn dimɛnshɔnal stebiliti, we de mek dɛn fayn fɔ print intrikɛt dizayn ɛn ditayla grafik dɛn.

 

Bɔdi Pafɔm  

Tin dɛn	PETG kor	PETG Ɔvlay
Tik we i tik (mm) .	0.095-0.4	0.06-0.1.1
Tεnshכn na di surface (Dyne) .	≥38	≥36
	Di say we dɛn de print	Di say we dɛn de print
Tensile Strength (Mpa) we yu go gɛt.	≥40	≥38
Densiti (g/cm 3) .	1.30±0.05	1,27±0.05
Vikat A120°C na di wan	78±2	76±2
Aplay fɔm	Printin layt, kad inlay, kor layt, .	ɔvlay fɔ ɔl kayn PETG, PVC kad

 

4.Ficha dɛn

Gud printabiliti (ɔfset ɛn skrin printin)

I izi fɔ lamin: Lay dɛn kin jɔyn witout adhesives, ɛn dɛn kin lamin wit PVC sheet togɛda.

Dynamic bending stress fɔ wan kad layf tɛm fɔ fayv ia

5.Offset Printing ɛn In Advantej dɛn

Ɔfset printin, we dɛn kin kɔl bak litografi, na wan we we bɔku pipul dɛn kin yuz fɔ print we kin mek dɛn print fayn fayn wan wit shap ditil dɛn ɛn kɔlɔ dɛn we de shayn. I min se dɛn kin transfa ink frɔm plet to rɔba blankit ɛn afta dat dɛn kin put ink pan di say we dɛn de print. Ɔfset printin gɛt bɔku bɛnifit dɛn, lɛk fɔ mek di pikchɔ dɛn nɔ de chenj, fɔ mek di kɔlɔ mach kɔrɛkt wan, ɛn fɔ ebul fɔ du big print rɔn fayn fayn wan.

6.PETG Sheet fɔ mek ID IC Kad

PETG (Polyethylene Terephthalate Glycol) na wan thermoplastic polyester we de sho fayn fayn klia, impak resistans, ɛn kemikal resistans. PETG sheet dɛn spɛshal fɔ ID IC kad aplikeshɔn, we de gi wan strɔng ɛn transparent bays fɔ print di infɔmeshɔn we dɛn nid. Dɛn sheet dɛn ya de gi di pafɛkt balans bitwin rigiditi ɛn fleksibiliti, we de mek shɔ se di kad dɛn de te yet i izi fɔ handle.

7.Bɛnifit dɛn fɔ Ɔfset Printin PETG Shit dɛn

7.1.Hay Print Kwaliti: 

Ɔfset printin PETG sheet dɛn de gi ɛksepshɔnal print klia ɛn kɔlɔ vibrancy, we de mek yu gɛt ID IC kad dɛn we pɔsin kin si.

7.2.Di we aw pɔsin kin te: . 

PETG sheet dɛn nɔ kin skrach, kemikal, ɛn UV raytin bad bad wan, ɛn dis kin mek shɔ se di kad dɛn we dɛn print kin liv lɔng.

7.3.Izi Prɔsesin: 

Ɔfset printin PETG sheet dɛn kin izi fɔ kɔt, thermoformed, ɛn laminated, we kin alaw fɔ difrɛn kɔstɔmayshɔn opshɔn dɛn.

7.4.Envayrɔmɛnt Friɛndli: 

PETG na risaykul matirial, we mek am wan eko-friɛndli chuk fɔ ID IC kad prodakshɔn.

7.5.Kɔst-Ɛfɛktiv: . 

Ɔfset printin PETG sheet dɛn de gi wan kɔst-ɛfɛktiv sɔlvishɔn fɔ ay-volyum kad prodakshɔn, we de ridyus di ɔl ɛkspɛns.

8.Di Sigifikɛns fɔ PETG Shit dɛn we dɛn de mek ID IC Kad

We i kam pan ID IC kad prodakshɔn, di durability ɛn sikyɔriti fɔ di kad dɛn na di impɔtant tin. PETG sheet dɛn de gi di trɛnk ɛn resistans we nid fɔ bia ɛvride wear ɛn tear. Pantap dat, PETG kin wok wit difrɛn we dɛn fɔ print, lɛk fɔ print ɔfset, we mek i fayn fɔ mek ID IC kad dɛn we pɔsin kin si ɛn we kin de fɔ lɔng tɛm.

9.Tips fɔ Achiv Ay-Kwaliti Ɔfset Printin pan PETG Shit

9.1.Kɔlɔ Kalibreshɔn: . 

Kalibrayt di printin ikwipmɛnt ɔltɛm fɔ mek shɔ se di kɔlɔ kɔrɛkt.

9.2.Fɔ Dray fayn fayn wan: 

Alaw inof drying time bitwin printin ɛn di prɔses dɛn we de kam afta dat fɔ mek yu nɔ gɛt smudging ɛn adhesion issues.

9.3.Tɛst ɛn Prɔtotayp: 

Kɔndɔkt print tɛst ɛn mek protɔtayp fɔ no ɛn adrɛs ɛni prɔblɛm we kin apin bifo ful-skel prodakshɔn.

9.4.Di Kɔndishɔn dɛn fɔ Stɔrej: 

Stɔ ɔfset printin PETG sheet dɛn na say we dɛn kin kɔntrol fɔ mek dɛn kɔntinyu fɔ gɛt wanwɔd ɛn fɔ mek dɛn nɔ wɔp.

10.Envayrɔmɛnt Impekt fɔ Ɔfset Printin PETG Shit

Ɔfset printin PETG sheet dɛn de gi envayrɔmɛnt advantej we yu kɔmpia am wit ɔda matirial dɛn we dɛn de yuz fɔ mek ID IC kad. PETG na tin we dɛn kin yuz bak, we min se dɛn kin yuz di sheet dɛn bak ɔ yuz dɛn bak, we kin mek dɛn nɔ west bɔku tin dɛn ɛn mek di kabon we dɛn kin put nɔ bɔku. Apat frɔm dat, PETG nɔ gɛt ɛnitin we de ambɔg pɔsin lɛk PVC (Polyvinyl Chloride), we de mek i bi sɔntin we sef ɛn we go kɔntinyu fɔ de.

Wi Prodyusin layn

Wi Wea Haus

FAQ dɛn we dɛn kin aks

1. Dɛn kin yuz ɔfset printin PETG sheet fɔ dual-sayd printin pan ID IC kad?

Yes, ɔfset printin PETG sheet dɛn fayn fɔ print tu-sayd. Dɛn transparency de alaw fɔ print na ɔl tu di say dɛn we dɛn de kɔntinyu fɔ si.

2. Ɔfset printin PETG sheet dɛn kɔmpitabl wit ɔl di printin prɛs dɛn?

Ɔfset printin PETG sheet dɛn kɔmpitabl wit bɔku pan di standad printin prɛs dɛn we dɛn kin yuz na di industri. Bɔt i fayn fɔ mek yu tɔk to di wan we mek ɔ di pɔsin we de gi yu di sheet fɔ gɛt patikyula infɔmeshɔn bɔt aw i go gri wit di shit.

3. Yu tink se dɛn kin laminate ɔfset printin PETG sheet dɛn fɔ mek dɛn gɛt mɔ protɛkshɔn?

Yes, ɔfset printin PETG sheet dɛn kin laminated wit protɛktiv film fɔ mek dɛn de te ɛn fɔ mek dɛn nɔ west ɛn te.

4. Aw lɔng di dizayn dɛn we dɛn print pan ɔfset printin PETG sheet dɛn kin las?

We dɛn kia fɔ dɛn fayn fayn wan, di dizayn dɛn we dɛn print pan ɔfset printin PETG sheet dɛn kin las fɔ bɔku ia ɛn dɛn nɔ kin chenj ɔ pwɛl bad bad wan.

5. Ɔfset printin PETG sheet dɛn fayn fɔ yuz na do?

Yes, ɔfset printin PETG sheet dɛn de sho fayn fayn rɛsistɛns to UV raytin ɛn wɛda, we de mek dɛn fayn fɔ yuz na do usay dɛn de ɛkspɛkt fɔ ɛkspos to san layt ɛn envayrɔmɛnt ɛlimɛnt dɛn.