|
Wallis PETG offset tintim krataa boa ID, sikakorabea ne smart card yɛ ne amanne gauges, core ne overlay options, ink ne lamination sɔhwɛ, nhwɛsode ne factory-direct B2B supply.
WLS-PETG Offset Krataa a Wɔde Di Dwuma
WALLIS na ɔkyerɛwee
| Kɔla: | |
|---|---|
| Ne kɛse: | |
| Dodow: | |
Wallis PETG offset tintim krataa no yɛ nea wɔayɛ ama ID card ayɛfo, smart card adwumayɛbea ahorow, sikatua kaad ayɛfo, access-control suppliers, card printers ne nneɛma a wɔkyekyɛ a ɛhwehwɛ sɛ wotumi tintim offset a ɛyɛ pintinn, lamination adwumayɛ a emu yɛ den ne multilayer card a wotumi de ho to so. Wobetumi de PETG nkrataa fitaa, a ɛda adi na wɔayɛ no sɛnea wɔpɛ ama sɛ core layers a wotumi tintim, layers a ɛboa, inlay layers ne transparent overlays.
PETG kaad a wɔyɛ no yɛ nhyehyɛe mu adeyɛ. Ɛsɛ sɛ wɔde krataa no mu duru, ahoɔden a ɛwɔ soro, ink chemistry, drying, print coverage, lamination temperature, pressure, cooling, RFID inlay thickness, magnetic stripe ne card dimensions a etwa to no bom di ho adanse. Wallis kamfo kyerɛ sɛ wɔnyɛ print-and-lamination sɔhwɛ ansa na wɔakra nneɛma pii, titiriw wɔ sikatua kaad, kaad a wɔmfa nkitahodi nni dwuma ne adansedi nkrataa a ɛtra hɔ kyɛ ho.
PETG betumi ama pefeeyɛ a ɛkorɔn, toughness ne thermal bonding pa, nanso generic nsɛm te sɛ 'compatible with every offset press,' 'mfe anum card nkwa,' 'UV-adanse' anaa 'fully recyclable card' hwehwɛ adanse fi adansi a wɔawie pɛpɛɛpɛ. Ɛsɛ sɛ kaad a edi mũ no—ɛnyɛ PETG krataa a wɔannoa no nko—di adetɔfo no nsusuwii, mfiri, anyinam ahoɔden ne nneɛma a atwa yɛn ho ahyia ho ahwehwɛde ahorow ho dwuma.
| Aguade a Wɔde Yɛ Adwuma | PETG offset printable core krataa ne transparent overlay nneɛma ma multilayer kaad |
| Product Abusua a Ɛyɛ Den | 0.05–0.80mm sɛnea mprempren kratafa data kyerɛ; pɛpɛɛpɛ range gyina core, overlay, kɔla ne amanne specification |
| Mfitiaseɛ Nkyerɛkyerɛmu Titiriw | 0.095–0.40mm PETG a wotumi tintim core krataa |
| Mfitiaseɛ Overlay Nkyerɛkyerɛmu | 0.06–0.10mm PETG a ɛyɛ mmerɛw a wɔde kata so |
| Akwan a Wɔfa so tintim nhoma | Offset ne silk-screen a wɔde tintim nhoma; UV dijitaal anaa akwan foforo hwehwɛ sɛ wonya ɔfasu ne ink a ɛfata |
| Nnwuma a Wɔde Di Dwuma | ID, kwan a wɔfa so kɔ hɔ, asɔremma, ahɔhodan safe, akwantuo, sikakorabea, nokwaredi, akyɛdeɛ, RFID ne IC kaad |
| B2B Mmoa | Nhwɛsode, amanne gauge ne kɛse, ink sɔhwɛ, lamination sɔhwɛ, card-nhyehyɛe nhwehwɛmu, QC nkyerɛkyerɛmu ne export supply |
Bisa PETG Kaad Krataa Nhwɛsode ne Quote
PETG yɛ polyester a wɔayɛ no glycol a wɔde di dwuma wɔ kaad a ɛyɛ mmerɛw ne nea ɛnyɛ hann mu. Sɛ wɔyɛ offset card a, ɛsɛ sɛ PETG krataa no ma controlled thickness, flatness, surface energy, whiteness anaa pefeeyɛ, dimensional stability ne thermal bonding. Krataa no betumi akura mfonini ahorow a wɔatintim anaasɛ ayɛ kaad a wɔawie no nhyehyɛe ne nea ɛbɔ ho ban no fã.
PETG soro nnuruyɛ yɛ soronko wɔ krataa ne PVC ho. Ink wetting, trapping, drying ne adhesion gyina surface treatment, surface tension, ink formulation ne press tebea so. Ɛsɛ sɛ wohu ɔfã a wobetumi atintim no pefee, na ɛsɛ sɛ wɔhwɛ sɛnea wɔde aduru no di dwuma ansa na wɔatintim.
PETG core krataa bi ma tintim mmoa, opacity ne structural thickness. PETG overlay taa yɛ transparent na ɛbɔ printed layer no ho ban wɔ lamination akyi. Enti ɛsɛ sɛ wɔkyerɛ ne kɛse, ahoɔden a ɛwɔ soro, ahoɔden a ɛtwetwe, ne density ne thermal response wɔ ɔkwan soronko so.
Raw-sheet data nkyerɛ sɛ wɔawie-kaad nkwa. Ɛsɛ sɛ wɔsɔ bending, torsion, abrasion, nnuru a ɛko tia, blocking, warpage, ɔhyew a egyina pintinn, layer adhesion ne anyinam ahoɔden dwumadi hwɛ wɔ card a wɔatintim koraa, laminated, punched ne personalized card no so.
Offset Nkyerɛwee Nhyehyɛe
Kaad Mfonini a Ɛyɛ Nsusuwii a Ɛkorɔn
Wɔakora gyinapɛn a edidi so yi so afi Wallis krataafa a edi kan no mu na wɔasan asiesie ama B2B nhwehwɛmu. Ɛsɛ sɛ wɔfa wɔn sɛ nhwɛsoɔ botaeɛ kɔsi sɛ wɔbɛsi sɔhwɛ gyinapɛn, conditioning, tolerances ne batch certificates so dua ama product code pɔtee no.
| Agyapadeɛ | PETG Core Nkyerɛkyerɛmu | PETG Overlay Nkyerɛkyerɛmu | B2B Adetɔ Nkyerɛkyerɛmu |
|---|---|---|---|
| Nneɛma a ɛyɛ den | 0.095–0.40mm na ɛwɔ hɔ | 0.06–0.10mm na ɛwɔ hɔ | Si so dua sɛ wɔkyekyem pɛpɛɛpɛ, point-to-point tolerance ne lot variation |
| Nhyɛso a Ɛwɔ Anim | ≥38 dynes/cm na ɛwɔ hɔ | ≥36 dynes/cm wɔ ɔfã a wotumi tintim | Gye tom sɔhwɛ kwan, ɔfã a wɔayɛ ho adwuma ne bere a wɔde sie a ɛsen biara ansa na woatintim |
| Ahoɔden a Wɔde Tensile | ≥40MPa na ɛwɔ hɔ | ≥38MPa na ɛwɔ hɔ | Si akwankyerɛ, sɔhwɛ ahoɔhare, conditioning ne gyinapɛn so dua |
| Muduro | 1.30 ± 0.05g/cm⊃3 na ɛwɔ hɔ; | 1.27 ± 0.05g/cm⊃3 na ɛwɔ hɔ; | Fa di dwuma ma nneɛma a wɔde hu ne mu duru ho nhyehyɛe, ɛnyɛ sɛ ɛno nkutoo ne su pa ho gyinapɛn |
| Vicat A120 na ɛwɔ hɔ | 78 ± 2°C na ɛyɛ hyew | 76 ± 2°C na ɛyɛ hyew | Vicat nyɛ lamination tẽẽ anaasɛ ɔsom-ɔhyew anohyeto |
| Dwumadi a Wɔtaa Yɛ | Printing layer, card inlay anaa ɔdan no mu ade titiriw | Ahobammɔ a wɔde kata so ma PETG, PVC anaasɛ composite cards a ɛne no hyia | Pene bonding ne nneɛma a atwa yɛn ho ahyia onyin so ma layer nkabom pɛpɛɛpɛ |
White Printable PETG Core a Wotumi tintim
Kaad-Grade PETG Nneɛma a Wɔde Yɛ
Core ne Overlay a Wɔpaw
| Paw Factor | PETG Core Krataa | PETG Nkatasoɔ |
|---|---|---|
| Dwuma Titiriw | Mfonini a wɔatintim, opacity, thickness ne structure support | Ahobammɔ a ɛda adi, ɔfasu awie ne tintim encapsulation |
| Sɛnea Wɔtaa Yɛ | Kɔla fitaa, opaque, translucent anaa amanne kwan so kɔla | Gloss a emu da hɔ, matte, frosted anaasɛ specialty wie |
| Nhoma tintim | Wɔtaa tintim offset anaa screen print | Mpɛn pii no, ahobammɔ layer a wɔantintim; printable specialty overlay hwehwɛ sɛ wosi so dua |
| Lamination a wɔde yɛ nneɛma | Ɛsɛ sɛ bond ne overlay, inlay ne core layers foforo | Ɛsɛ sɛ ɛma adhesion a ɛyɛ den a enni haze, bubbles anaasɛ peeling |
| QC Adwene a Wɔde Si Hɔ | Ne kɛse, kɔla, opacity, soro tension, flatness ne printability | Clarity, haze, gloss, texture, bonding, abrasion ne scratch adwumayɛ |
Mpɛn pii no, wɔde ntoatoaso pii na ɛyɛ adwumayɛfo nkrataa. Mprempren ISO/IEC 7810 gyinapɛn no kyerɛ honam fam su ahorow a ɛwɔ hɔ ma adansedi nkrataa, bere a ID-1 nhyehyɛe a wɔtaa de di dwuma no bɛyɛ 85.60 × 53.98mm a ne kɛse a wɔfrɛ no 0.76mm. Ɛsɛ sɛ PETG stack pɔtee no bu akontaa fa core a wɔatintim, transparent overlays, adhesives, RFID inlays, chip modules, magnetic stripes ne compression bere a lamination.
| Layer | Typical Dwumadi | PETG Dwumadie Nkonimdie |
|---|---|---|
| Anim a Wɔde Kata So | Ɛbɔ adwinni ho ban na ɛhwɛ gloss anaa matte finish so | Clarity, bond, abrasion, personalization ne magnetic-stripe a ɛne ne ho hyia |
| Anim a Wɔatintim Core | Ɔkura process kɔla, logos, nsɛm ne ahobanbɔ adwini | Ink adhesion, drying, print coverage ne dimensional stability |
| Mfinimfini Core / Inlay | Ɛsi thickness na ebia ɛwɔ RFID antenna anaa chip | Inlay thickness, cavity, nhyɛso kyekyɛ ne anyinam ahoɔden adwumayɛ |
| Back Printed Core a Wɔatintim no | Mfonini ahorow a ɛwɔ akyi ne balancing layer | Fa anim-afã a ɛyɛ den ne nea wɔde tintim no hyia baabi a ɛbɛyɛ yiye na ama curl no so atew |
| Akyi Nkataso | Ɛbɔ print ho ban na ɛboa signature panel anaa stripe options | Kari pɛ, bonding, encoding ne personalization ahwehwɛde ahorow |
Anim ne akyi gauges a ɛnyɛ pɛ, asymmetric print coverage anaa nneɛma a wɔadi afra betumi ama residual stress ne curl aba. Fa nhyehyɛe a ɛne ne ho hyia di dwuma wɔ baabi a ɛbɛyɛ yiye na susuw sɛnea ɛyɛ tratraa bere a kaad a wɔawie no ayɛ nwini na wɔayɛ no yiye akyi.
Nhyɛso, shrinkage, ink, adhesive flow, magnetic stripe ne ɛlɛtrɔnik nneɛma nya nea etwa to no so nkɛntɛnso. Ɛsɛ sɛ wɔsusu Finished-card thickness wɔ lamination, cooling, punching ne conditioning akyi.
| Printing Control | a Wɔkamfo kyerɛ sɛ wɔmfa nyɛ adwuma |
|---|---|
| Surface Verification a Wɔde Di Dwuma | Kyerɛ ɔfã a wotumi tintim, susuw ahoɔden a ɛwɔ soro na hwɛ sɛ mfutuma, ngo, nsensanee anaa ayaresa no aporɔw anaa |
| Mia na Feeder Nhyehyɛe no so | Si krataa no mu duru, ne stiffness, static control, gripper margin, feeder mframa ne delivery stacking so dua |
| Ink Nhyehyɛe | Fa ink a wɔayɛ ama plastic a ɛnyɛ absorbent di dwuma na hwɛ sɛ adhesion, drying, flexibility ne lamination resistance |
| Nsu ne Ink a Ɛkari pɛ | Control fountain solution na ɛtew emulsification, drying delay ne mfonini sintɔ so |
| Kɔla a Wɔde Yɛ Nhwehwɛmu | Fa adanseɛ a wɔapene so, density botaeɛ, Pantone references ne lot-to-lot substrate kɔla control di dwuma |
| Delivery ne Stacking a Wɔde Ma | To pile pressure ano hye, fa anti-setoff measures a ɛfata di dwuma na kwati blocking anaa image transfer |
Ebia krataa offset ink renbata anaasɛ ɛnyow yiye wɔ PETG so. Ɛsɛ sɛ adetɔfo si oxidative, UV-curable anaa plastic-compatible ink nhyehyɛe afoforo so dua ne ink ne press a wɔde ma no, afei sɔ krataa a wɔatintim no hwɛ denam lamination so.
Wobetumi atintim afã abien no nyinaa bere a krataa no ani ne press adwumayɛ fata no. Ɛsɛ sɛ wɔsa ink a ɛwɔ ɔfã a edi kan no yiye ansa na wɔatwam nea ɛto so abien no, na ɛsɛ sɛ wɔma adwinni a efi anim kɔ akyi no kari pɛ na ama kurukuruwa ne kɔla a ɛsakrasakra no so atew.
| Sɔhwɛ | Botae |
|---|---|
| Teyp a Wɔde Bata Ho | Hwɛ surface bond wɔ drying anaa curing bere a wɔakyerɛkyerɛ mu akyi |
| Rub na Scratch na ɛyɛ | Ɛhwɛ sɛnea wɔde di dwuma ansa na wɔayɛ lamination ne sɛnea wɔde kaad a wɔawie no kyɛ wɔ lamination akyi |
| Stack a Wɔde Siw Ano | Hwɛ mfonini a wɔde kɔ baabi foforo wɔ pile nhyɛso, bere ne ɔhyew ase |
| Lamination Ɔhyew Sɔhwɛ | Hwɛ kɔla nsakrae, ink tu, bubbling ne adhesion akyi ɔhyew kyinhyia mũ no nyinaa |
| Nnuru a Ɛko Tia | Ɔhwehwɛ nsa, cleaner, plasticizer, adhesive ne afoforo a ɛfa nkitahodi ho |
| Kɔla ne Barcode Nhwehwɛmu | Si so dua sɛ mfonini ahorow, nsɛm a ɛyɛ fɛ, QR codes ne barcodes kɔ so kenkan bere a wɔawie no |
PETG layers a ɛne ne ho hyia betumi akyekye wɔ ɔhyew mu bere a wɔde card lamination ayɛ no, na ɛtew sɛnea wɔde wɔn ho to nneɛma a wɔde nkata so a wɔtaa de di dwuma so no so. Nanso, ɛnsɛ sɛ wɔfa no sɛ adhesive-free bonding ma PETG grade biara, ink a wɔatintim, PVC layer, RFID inlay anaa mixed-material structure. Nhwɛsode a wɔde yɛ peel sɔhwɛ ho hia.
Condition the materials: Stabilize core sheets, overlays, printed layers ne inlays wɔ ɔhyew ne ɔhyew a wɔahyɛ so.
Si orientation so dua: Kyerɛw afiri no kwankyerɛ, transverse kwankyerɛ, ɔfã a wɔayɛ ho adwuma ne ɔfã a wɔatintim no ma layer biara.
Yɛ stack a ɛkari pɛ: Fa anim ne akyi gauges hyia na bu akontaa ma chips, antennas, stripes ne signature panels.
Run a steppped heat trial: Kyerɛ ɔhyew, nhyɛso ne tra a ɛba fam sen biara a ɛma nkitahodi ne petee a wogye tom ba.
Onwini wɔ nhyɛso a wɔahyɛ so: Onwini nya dimensional stability, haze, residual stress ne blocking so nkɛntɛnso.
Tebea ansa na woasusuw: Hwɛ sɛnea ɛyɛ kɛse, ɛtwetwe, ɛyɛ warpage, peel ahoɔden ne sɛnea ɛte wɔ bere a woasan anya ahoɔden akyi.
Lock the approved recipe: Kyerɛw mprɛte wie, yi sini, stack nnidiso nnidiso, ɔhyew profile, nhyɛso, bere ne onwini.
Wobetumi de PETG ne PVC adi dwuma wɔ composite card structures mu, nanso nsonsonoe a ɛwɔ softening, shrinkage ne surface chemistry mu no betumi ama curl, haze anaasɛ weak bonding aba. Ebia ɛho behia sɛ wɔde krataa a wɔde kyekyere anaasɛ wɔde kata so kata so ma nneɛma bi a wɔaka abom.
Vicat data boa ma wɔde nneɛma a ɛyɛ mmerɛw suban toto ho nanso ɛnkyerɛ press temperature tẽẽ. Ɛsɛ sɛ wɔde ɔhyew a ɛfa kaad stack a edi mũ no mu, nhyɛso, tra, mprɛte hyew ne onwini si hɔ wɔ sɔhwɛ mu.
| Su | PETG Nneɛma a Wɔde Si Hɔ | Nhwehwɛmu a Ɛho Hia |
|---|---|---|
| Adwumayɛfoɔ ne Asuafoɔ ID Kaad | White printable core ne nea ɛda adi pefee a wɔde kata so | Mfonini no su, da biara da flexing, abrasion ne personalization |
| Akwankyerɛ ne Ahɔhodan mu Safoa Kaad | PETG core a wotumi tintim a magnetic stripe anaa RFID inlay wom | Lock compatibility, encoding, akenkanfo dwumadie ne mpɛn pii a wɔde di dwuma |
| Asɔremma, Nokwaredi ne Akyɛde Kaad | Offset tintim a ɛkorɔn, kɔla ahorow a wɔahyɛ da ayɛ ne premium overlay wie | Brand kɔla, barcode, scratch resistance ne sika kotoku a ɛyɛ den |
| Katua ne Sikakorabea Kaad | Controlled multilayer nhyehyɛe a chip, stripe ne ahobammɔ tintim | Ɛfa sikatua-network, chip-module ne wie-kaad ahwehwɛde |
| Transport ne Campus Kaad a Wɔde Di Dwuma | RFID / NFC nhyehyɛe a ɛyɛ den a wɔatintim ne overlay layers | Nkitahodi kyinhyia a ɛkorɔn, antena mudi mu kura, akenkanfo kwan ne nneɛma a atwa yɛn ho ahyia a ɛbɔ akwakoraa ne aberewa |
ID ne Access Card Nnwuma a Wɔde Di Dwuma
Sikakorabea ne Kaad a Wɔde Tua Ka Ho Nnwuma
| Fa | PETG Kaad Nsusuwii Ahwehwɛde |
|---|---|
| Chip a Ɛntumi Nnya Nkitahodi | Si chip model, frequency, memory, protocol, lamination-ɔhyew anohyeto ne encoding nhyehyɛe no so dua |
| Antena a wɔde yɛ adwuma | Bɔ conductor geometry ho ban fi nhyɛso, punching ne card-edge cutting ho |
| Prelam Inlay a wɔde kyerɛw nsɛm | Fa nneɛma, ne kɛse, ne kɛse, bonding surface ne thermal shrinkage ne PETG layers hyia |
| Di nkitaho ne Chip Module | Control card-nipadua milling, cavity nsusuwii, module adhesive ne soro flatness |
| Magnetic Stripe a Wɔde Yɛ Nneɛma | Paw LoCo anaa HiCo stripe, overlay adansi, stripe gyinabea, encoding ne abrasion ahwehwɛde |
| Dwumadi mu Sɔhwɛ | Kenkan, kyerɛw na encode ansa na lamination, lamination akyi, punching akyi ne flex sɔhwɛ akyi |
RFID ne Smart Card Nneɛma a Wɔde Yɛ Adwuma
PETG Kaad a Wɔayɛ no Laminated a Wɔawie
| Adeyɛ | Quality Control Point |
|---|---|
| Nkratafa a Wɔde Twitwa | Ne tenten, ne tɛtrɛtɛ, ne ahinanan, ne tintim dinkyerɛw, ne anoano a ɛho tew ne ne stack alignment |
| Kaad a Wɔde Bɔ Akuturuku | Kaad nsusuwii, ntwea so radius, burrs, fitaa, mpaapaemu ne layer mpaapaemu |
| Slot ne Tokuru a Wɔbɔ | Gyinabea, antenna clearance, edge kwan ne hanging-load resistance |
| Ɔhyew / Retransfer Personalization | Printer akwantu, ribbon transfer, soro wie, ɔhyew distortion ne mfonini a ɛtra hɔ kyɛ |
| Embossing anaa Foil Stamping a wɔde hyɛ mu | Card-nipadua ductility, ɔhyew, nhyɛso, foil bond, mpaapaemu formation ne akenkan |
| Barcode / QR / Nsɛm a wɔde kyerɛw nsɛm | Scanner akenkan, data pɛpɛɛpɛ, encoding aba ne post-stress dwumadie |
| Titiriw | Nneɛma Mfaso | Anohyeto Titiriw |
|---|---|---|
| PETG | Nneɛma a emu da hɔ yiye, ɛyɛ den, offset-print tumi ne ɔhyew bonding a emu yɛ den wɔ adan a ɛne ne ho hyia mu | Ɛhwehwɛ sɛ ink a ɛfata, nhyehyɛe a wɔhwɛ so ne nhyehyɛe a wɔatu ho ama a wɔde bɛsan de adi dwuma ama kaad a wɔawie |
| PVC a wɔde yɛ adwuma | Wɔde kaad nhyehyɛe a wɔde asi hɔ, trɛw a wɔde ma, offset tintim a wonim no yiye ne ɛka a wɔbɔ no yiye | Ɔhyew a ɛko tia a ɛba fam ne nneɛma a atwa yɛn ho ahyia a ɛsono esiane polymer a chlorine wom nti |
| Polycarbonate a wɔde yɛ nneɛma | Ɔhyew a ɛkorɔn a ɛko tia, nkɛntɛnso ahoɔden ne laser-personalization tumi wɔ ahofama grades | Nneɛma ne nneɛma a wɔde yɛ adwuma ho ka a ɛkɔ soro; tintim ne lamination tebea horow |
| PETG / RPETG a wɔasan de adi dwuma | Ebetumi atew virgin resin a wɔhwehwɛ so bere a wɔde nneɛma a wɔasan de adi dwuma a wɔagye atom di dwuma no | Kɔla, efĩ, pefeeyɛ, mfiri su ne adansedi krataa no kɛse hwehwɛ sɛ wodi so |
PETG yɛ thermoplastic na ebia wobetumi asan de adi dwuma wɔ asuten a ɛne ne ho hyia, a wɔatu ho ama a wɔboaboa ano na wɔyɛ ho adwuma. Eyi nkyerɛ sɛ PETG kaad biara a wɔawie no, wobetumi asan de adi dwuma wɔ mpɔtam hɔ. Inks, overlays, adhesives, chips, antennas, contact modules, magnetic stripes ne ahobammɔ mfiri betumi ama ayɛ den sɛ wɔbɛhyehyɛ na wɔasan anya bio.
| Claim | Asɛdeɛ B2B Nkyerɛaseɛ |
|---|---|
| PETG Krataa a wotumi de di dwuma bio | Mfiridwuma mu a wotumi di ho dwuma wɔ asuten a ɛfata a ɛne PETG hyia mu; ɛsɛ sɛ wosi mpɔtam hɔ gye a wogye tom no so dua |
| Kaad a Wɔawie a Wotumi De Di Dwuma | Ɛhwehwɛ sɛ wɔhwehwɛ layers, inks, electronics ne mpɔtam hɔ card-recovery nhyehyɛe nyinaa mu |
| PVC-Free nnim | Ɛyɛ adwuma bere a kaad nhyehyɛe a edi mũ no nni PVC layers, coatings anaa components biara nkutoo |
| Carbon Footprint a wɔatew so | Ɛhwehwɛ sɛ nkwa nna ho nsɛm a ɛde nneɛma pɔtee, nea wɔyɛ, ɔsom nkwa nna, akwantu ne nea wɔtow gu tebea no toto ho |
| Nsɛm a Wɔasan de adi dwuma | Ka ɔha biara mu nkyekyɛmu, fibea, mass-balance anaa physical-content kwan ne adansedie no kɛseɛ |
| Nhwehwɛmu Ade | a wɔkamfo kyerɛ sɛ wɔhwɛ so |
|---|---|
| Thickness Profile a Ɛyɛ Fɛ | Nkyɛmu gauge, cross-sheet nsakrae, point tolerance ne lot consistency |
| Krataa no Nsusuwii | Ne tenten, ne tɛtrɛtɛ, ne ahinanan, ne twa pɛpɛɛpɛ ne ne anoano su |
| Flatness ne Curl a Ɛyɛ Fɛ | Bow, edge lift, orientation ne dimensional sanba akyi conditioning |
| Kɔla ne Optical Quality | Whiteness, L * a * b *, opacity, haze, pefeeyɛ, gloss ne aniwa a wɔapene gyinapɛn |
| Surface ne Ayaresa a Wɔde Yɛ Adwuma | Surface tension, printable ɔfã, scratches, efĩ, gels, tuntum nsensanee ne texture |
| Offset Print Sɔhwɛ | Ink wetting, density, trapping, adhesion, drying, blocking, nkyerɛwee pa ne kɔla a ɛyɛ pɛpɛɛpɛ |
| Lamination Sɔhwɛ a Wɔde Di Dwuma | Peel ahoɔden, bubbles, haze, shrinkage, warpage, kɔla nsakrae ne mprɛte a wɔayi no adi |
| Kaad Sɔhwɛ a Wɔawie | Nsusuwii, ne kɛse, ne bending, torsion, abrasion, ɔhyew, nnuru ne anyinam ahoɔden dwumadi |
| Traceability a wotumi hwehwɛ mu | Product code, resin batch, da a wɔyɛe, krataa lot, afã a wɔayɛ ho adwuma ne nhwehwɛmu amanneɛbɔ |
Stable PETG card-sheet supply hwehwɛ sɛ wɔhwɛ so raw material, extrusion anaa calendering, thickness monitoring, surface treatment, kɔla management, twa, clean packing ne batch traceability. Ɛsɛ sɛ wɔde nneɛma a wɔyɛ no pii toto nhwɛsode a wɔde wɔn nsa ahyɛ ase ne nkyerɛkyerɛmu a wɔakyerɛw ho.
PETG Kaad Krataa a Wɔyɛ ne Nea Ɛyɛ Paara
Fa PETG nkrataa a wɔatoto mu no sie petee wɔ adekoradan a ɛho tew, ɛhɔ yɛ kusuu na wɔhwɛ ɔhyew so.
Fa nneɛma no nkɔ akyirikyiri fi owia hann tẽẽ, ɔhyew afiri, ɔdan atifi a ɛyɛ hyew ne nsukorade a ɛhɔ yɛ hyew kɛse ho.
Bɔ nneɛma a wotumi tintim ne nea wotumi hu ho ban fi nsateaa nkyerɛwee, ngo, mfutuma, nsensanee ne akisikuru ho.
Kwati pallet support a ɛnyɛ pɛpɛɛpɛ ne stack pressure a ɛboro so a ebetumi ama curl anaasɛ asiw aba.
Tebea nkrataa a ɛwɔ pressroom no mu ansa na wɔatintim anaasɛ wɔabɔ no lamination bere a adekoradan tebea yɛ soronko no.
Fa ahobammɔ interleaving, nsuo-resistant wrapping, reinforced cartons ne export pallets di dwuma.
Fa nneɛma a wɔakora so a edi kan, nea edi kan fi adi di dwuma na san hwɛ ahoɔden a ɛwɔ soro bere a wode asie bere tenten awie no.
Nneɛma a Wɔkora So a Wɔabɔ Ho Ban a Ɛyɛ Flat
Nneɛma a Wɔde Di Dwuma wɔ Batch-Controlled Inventory
Export Supply Ahosiesie a Wɔyɛ
Wɔabɔ ho ban Packing ma Amanaman Ntam B2B Orders
Card-industry specialization: Wobetumi ahwɛ core krataa, overlay, inlay, printing ne lamination sɛ adeyɛ biako nhyehyɛe.
Custom thickness ne size: PETG nkrataa betumi ama ama card stacks ahorow, press ne imposition nhyehyɛe.
Offset-printing mmoa: Wobetumi asusuw nhwɛsode ahorow ho wɔ soro ahoɔden, ink a ɛbata ho, drying, kɔla ne post-lamination adwumayɛ.
Core ne overlay options: Wobetumi aka White, transparent, matte, gloss ne project-specific PETG layers ho asɛm.
Smart-card nkabom: RFID inlay, chip module, magnetic stripe ne finished-card sɔhwɛ betumi aka nkɔso ho.
Factory-direct B2B supply: Ɛfata ma card adwumayɛbea, printa, converters, nhyehyɛe integrators, importers ne distributors.
Card application, hwɛ kwan sɛ ɔsom nkwa ne destination gua.
Layer a wɔhwehwɛ: core a wotumi tintim, mfinimfini core, transparent overlay anaa specialty layer.
Ne kɛse, ne boasetɔ, ne kɛse, ne kwankyerɛ ne dodow.
White, transparent, translucent anaa amanne kɔla ne optical ahwehwɛde.
Offset press model, ink system, UV anaasɛ amanne kwan so ayaresa ne adwinni a wɔde kata so.
Lamination press, layer nhyehyɛe, ɔhyew, nhyɛso, tra, onwini ne mprɛte wie.
Finished card size, thickness, corner radius ne gyinapɛn a wɔhwehwɛ.
RFID chip, antenna, inlay, contact module, magnetic stripe anaa nsaano nkyerɛwee panel.
REACH, RoHS, nneɛma a wɔasan de adi dwuma, nhwehwɛmu amanneɛbɔ anaa nkrataa foforɔ a wɔhwehwɛ.
Nhwɛso dodow, afe afe nkɔmhyɛ, hyɛn gyinabea a wɔrekɔ, packing ne delivery nhyehyɛe.
Ka Wo PETG Kaad Nneɛma Dwumadie no ho asɛm
Wɔde di dwuma sɛ printable core, supporting layer, card inlay layer anaasɛ transparent overlay wɔ laminated ID, access, membership, ahɔhodan, sikakorabea, akwantu ne smart cards mu.
Mprempren nneɛma abusua no kyerɛw 0.05–0.80mm. Mfitiaseɛ mfiridwuma pon no kyerɛ 0.095–0.40mm ma core sheets ne 0.06–0.10mm ma overlays. Si range pɔtee a ɛwɔ product code biara ho no so dua.
Yiw, bere a afã abien no nyinaa wɔ ɔfasu a ɛfata na tintim nhyehyɛe no boa afã abien dinkyerɛw. Ɛsɛ sɛ wɔsa ink a ɛwɔ ɔfã a edi kan no koraa ansa na wɔatwam nea ɛto so abien no.
Ɛnsɛ sɛ wosusuw sɛ amansan nyinaa hyia. Ɛsɛ sɛ wɔsɔ krataa no mu duru, ne den, press feeder, ink, fountain solution, curing ne delivery system hwɛ.
Fa ink a wɔapene so sɛ wɔmfa nyɛ plastic a ɛnyɛ nea ɛtwetwe nsu di dwuma. Ebia nhyehyɛe ahorow a wɔtaa de di dwuma wɔ oxidative, UV-curable ne afoforo bɛyɛ wɔn ade wɔ ɔkwan soronko so, enti ɛho hia sɛ wɔyɛ adhesion, drying ne lamination sɔhwɛ ahorow.
Mfitiase krataafa no twe adwene si anyɛ yiye koraa no dynes 38/cm ma PETG core ne anyɛ yiye koraa no dynes 36/cm ma overlay printing fã no. Ɛsɛ sɛ botae a etwa to no ne nea ɔde ink ma no ne ɔkwan a wɔfa so sɔ hwɛ no hyia.
Sɛnea wɔyɛ nneɛma a ɛwɔ soro no betumi asesa bere a bere kɔ so no. Fa nneɛma sie a wɔatoto mu na hwɛ sɛ ɛyɛ ɔfã a wotumi tintim ne nea ɛwɔ soro no mu ahoɔden ansa na wɔayɛ, titiriw bere a wode asie bere tenten akyi.
Ebia PETG layers a ɛne no hyia no bɛbɔ ɔhyew mu, nanso lamination a enni adhesive yɛ grade- ne structure-specific. Ink a wɔatintim, nneɛma a wɔadi afra ne inlays betumi ahwehwɛ sɛ wɔde tie layer anaasɛ coated overlay.
Wobetumi ayɛ PETG/PVC composite structures, nanso ɛsɛ sɛ wɔsɔ bonding, shrinkage, curl, haze ne onyin hwɛ. Nneɛma bi a wɔaka abom no hwehwɛ sɛ wɔde ade a wɔde nkata so anaasɛ wɔde kata so.
Amansan tebea biara nni hɔ. Fa PETG grades ankasa, ink, overlay, inlay ne press no yɛ ɔhyew, nhyɛso, tra ne onwini kyinhyia no.
Dabi Vicat de suban a ɛma obi yɛ mmerɛw toto sɔhwɛ pɔtee bi ase. Lamination gyina stack a edi mũ, ɔhyew a wɔde kɔ baabi foforo, nhyɛso, tra ne onwini so.
Aane. Ɛsɛ sɛ wɔma inlay nneɛma, antenna, chip, adhesive, total thickness, lamination pressure ne akenkan/kyerɛw adwumayɛ no yɛ nokware.
Yiw, egyina card-body milling, cavity dimensions, module adhesive, surface flatness, ɔhyew a ɛda adi ne anyinam ahoɔden sɔhwɛ ahorow ase.
Aane. Paw magnetic overlay anaa stripe adansi a ɛfata na sɔ stripe gyinabea, bonding, coercivity, encoding ne abrasion hwɛ.
Dabi, ɔsom nkwa gyina adansi no nyinaa, tebea a wɔde di dwuma, kaad no mu duru, lamination, personalization ne nneɛma a atwa yɛn ho ahyia a ɛda adi so. Nkwa ho asɛm hwehwɛ sɛ wɔde kaad a wɔawie sɔ hwɛ.
UV adwumayɛ yɛ nea ɛfa grade pɔtee bi ho. Mma nkyerɛ sɛ wowɔ abɔnten anaa bere tenten UV a ɛko tia a wim tebea, kɔla-sesa, mfiri ne aniwa sɔhwɛ ho nsɛm nka ho.
PETG betumi ayɛ nea wotumi de di dwuma bio wɔ mfiridwuma mu wɔ asuten a ɛne ne ho hyia mu, nanso ebia nkrataa a wɔawie a ink, ade a wɔde nkata so, chips, antenna ne nsensanee wom no behia sɛ wɔboaboa ano na wɔyɛ ho adwuma titiriw.
Ɛnyɛ sɛ asɛm a wɔka a enni nnyinaso. Nneɛma a atwa yɛn ho ahyia adwumayɛ gyina resin fibea, ne yɛ, card nkwa nna, nneɛma a wɔasan de adi dwuma, akwantu ne nkwa awiei nhyehyɛe so.
White, transparent, translucent ne amanne kɔla plus amanne krataa akɛse betumi asusuw sɛnea thickness, optical botae, MOQ ne production feasibility.
Fa nkratafa sie a wɔatoto mu, ayɛ petee, ɛho tew na ɛnyow wɔ baabi a ɔhyew ne owia hann ntumi nkɔ. Bɔ ɔfasu no ho ban fi mfutuma, nsensanee, ngo ne nsateaa nkyerɛwee, ne condition sheets ho ansa na woatintim.
Aane. Print, sa, laminate, cool, punch na personalize samples denam mfiri a wɔpɛ sɛ wɔyɛ no so ansa na woapene nkyerɛkyerɛmu a etwa to no so.
MOQ gyina thickness, kɛse, kɔla, soro, ayaresa, core anaa overlay grade, amanne twa, packing ne afe afe ahwehwɛde.
Fa layer adwuma, thickness, kɛse, kɔla, offset press, ink, lamination nhyehyɛe, wie card specification, chip anaa stripe ahwehwɛde, dodow ne destination ma.
Di Wallis Plastic ho nkɔmmɔ na woanya PETG offset printable core sheets ne transparent overlay materials ma ID, kwan a wɔfa so nya, asɔremma, ahɔhodan, akwantu, sikakorabea ne smart card nhyehyɛe. Yɛn kuw no boa amanne gauges ne akɛse, ink ahwehwɛde, lamination sɔhwɛ, RFID ne magnetic nkabom, QC nkyerɛkyerɛmu ne adwumayɛbea-tẽẽ B2B ma.
