|
Wholesale PVC core sheet na ID, gadzraɖoƒe, SIM, mɔɖeɖe kple RFID kaɖi wɔwɔ. Trɔ asi le titrime, lolome, amadede, Vicat grade, anyigbadzi dyne kple roughness, kple kpɔɖeŋu dodokpɔ kple dɔdɔ babla xexeame katã.
WLS- PVC Core sheet
WALLIS
| Amadede: | |
|---|---|
| Agbɔsɔsɔ: | |
| Agbɔsɔsɔ: | |
Wallis PVC core sheet nye kaɖi ƒe gɔmeɖoanyi sesẽ si wowɔ na dɔnyala bibiwo ƒe plastik kaɖi wɔwɔ, kaɖi ƒe ŋutilã siwo wota, PVC RFID wɔwɔ, kple kaɖi ƒe xɔtuɖoɖo siwo me kadodo mele o. Wozãnɛ abe titina xɔtuɖaŋu ene, eye wòdoa alɔ kaɖi ƒe gbadzaƒe, mɔ̃ ƒe ŋusẽ, asitɔtrɔ le nɔnɔmewo ŋu si dzi wokpɔna, agbalẽtata ƒe dɔwɔwɔ, kple dzoxɔxɔ ƒe ƒoƒo si li ke.
Woɖo nyatakakaawo na B2B kaɖi wɔlawo siwo wɔa ID gbalẽviwo, gadzraɖoƒegbalẽviwo, SIM kaɖiwo, mɔɖeɖegbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo, hamevinyenye ƒe agbalẽviwo, nunana gbalẽviwo, ʋuɖogbalẽviwo, kple RFID smart cardwo. Woate ŋu atsɔ eƒe titrime, agbalẽa ƒe didime, amadede, Vicat ƒe dzesi, anyigba ƒe amadede, kple anyigba ƒe ƒuƒuiƒe asɔ kple kaɖia tutu kple dɔwɔnu siwo le tsia te.
Le dɔa ƒe dodokpɔ me la, ele be nuƒlelawo nagblɔ kaɖi ƒomevi si wowɔ vɔ, kaɖi ƒe titrime bliboa, agbalẽtata ƒe ɖoɖo, Overlay film alo inlay structure, lamination ƒe nɔnɔmewo, kple agbalẽvi ƒe nɔnɔme si hiã. Emegbe Wallis ate ŋu adzra kpɔɖeŋu si sɔ ɖo na agbalẽtata, lamination, punching, kple dodokpɔ le kaɖi siwo wowɔ vɔ hafi awɔe le agbɔsɔsɔ gã me.
Wotu asixɔxɔ siwo gbɔna ɖe adzɔnuwo ƒe nɔnɔme si li fifia si wona na axa sia dzi. Ele be woaɖo kpe nudidi mamlɛawo dzi to adzɔnu ƒe dzeside, kpɔɖeŋu si dzi woda asi ɖo, nyayɔyɔ, kple batch documentation hafi woawɔe le agbɔsɔsɔ gã me.
| Dodokpɔ Nu ƒe | Akpa | si Wogblɔ Emetsonu ƒe | Kadodo na Kpekpeɖeŋugbalẽviwo wɔwɔ | |
|---|---|---|---|---|
| Eƒe titrime | mm | 0.10–0.50 ƒe ɣeyiɣi | Wotiae le nuto si wota, inlay, Overlay film layers, kple taɖodzinu si wowu enu-kaɖi ƒe titrime nu. | |
| Toto | g/cm⊃3 ƒe ƒuƒoƒo; | 1.42 ± 0.05 ƒe xexlẽme | Doa alɔ agbalẽ ƒe kpekpeme si mewɔa tɔtrɔ o, eƒe sesẽ, punching nuwɔna, kple laminated kaɖi ƒe wɔwɔme. | |
| Tensile Ŋusẽ | Si mlɔ anyi | MPa | ≥44 ƒe xexlẽme | Kpena ɖe nu vevi la ŋu be wòatsi tre ɖe keke kple mɔ̃ ƒe nuteɖeamedzi ŋu le tɔtrɔ kple kaɖi zazã me. |
| Tsi tsitre | ≥46 | |||
| Vicat ƒe Fafaƒe | Kpekpeɖeŋugbalẽvi ƒe Dzeside dzro aɖe ko | °C | 78 ± 2 ƒe xexlẽme | General printed and laminated PVC kaɖi ƒe xɔtuɖoɖowo. |
| Gadzraɖoƒegbalẽvi ƒe Dzeside | 74 ± 2 ƒe xexlẽme | Ele be woatsɔ dzeside tiatia asɔ kple gadzraɖoƒe-kaɖi tutu kple lamination ƒe tsatsam si dzi woda asi ɖo. | ||
| SIM Card ƒe Dzeside | 90 ± 2 ƒe xexlẽme | Dzoxɔxɔ ƒe dzeside si kɔ wu na SIM kaɖi ƒe ŋutilã ƒe dɔwɔwɔ, le dɔa ƒe kpeɖodzi te. | ||
| Anyigbadzi Dyne | dynes/cm | ≥34 ƒe xexlẽme | Doa alɔ tsidzadza kple nuŋlɔtsi ƒe ƒoƒo ɖe wo nɔewo ŋu; agbalẽtata dodokpɔwo gakpɔtɔ hiã na ink-mɔ̃ si wotia. | |
| Anyigba ƒe Kpekpeme | Ra | μm | 0.7–1.8 ƒe xexlẽme | Ekpɔa ŋusẽ ɖe agbalẽwo ƒe nuɖuɖu, ink ƒe asitɔtrɔ, lamination ƒe kadodo, kple anyigba ƒe ɖekawɔwɔ mamlɛtɔ dzi. |
| Rz | 4.0–12 ƒe ɣleti | |||
PVC core sheet nye xɔtuɖoɖo ƒe anyigba si woda ɖe ametakpɔnu Overlay film s siwo le laminated plastic card dome. Le alesi wowɔe nu la, woate ŋu ata nu vevitɔa tẽ, azãe abe titinanu si wometa o ene, alo atrɔe wòazu nusi wotsɔ blae gbadzaa alo elektrɔnikmɔ̃ si me antenna, chip module, alo akpa bubu si wɔa dɔ le.
To vovo na Overlay film film, si kpɔa kaɖia ƒe anyime ta koŋ la, core sheet la kpena ɖe kaɖia ƒe ŋutilã ƒe akpa gãtɔ si me mekɔ o, eƒe sesẽme, eƒe gbadzaƒe, kple eƒe didime ƒe liƒo ŋu. Eyata nuwo ƒe nɔnɔme siwo mewɔa tɔtrɔ o le vevie na ŋkɔ ŋɔŋlɔ, lamination, punching, personalization, kple automated card handling.
PVC Core sheet Nusiwo wotsɔ wɔe
Kpekpeɖeŋugbalẽvi-Dzeside PVC Substrate
Mele be kaɖidɔwo natia PVC nu veviwo to woƒe titrime ɖeɖeko dzi o. Dzeside si sɔ hã nɔ te ɖe dzoxɔxɔ ƒe ŋuɖoɖo, agbalẽtata ƒe mɔnu, elektrɔnikmɔ̃ siwo wotsɔ de eme, embossing alo ame ŋutɔ ƒe tɔtrɔ ƒe ɖoɖo, kaɖi ƒe agbenɔƒe, kple lamination stack bliboa dzi.
| Kpekpeɖeŋugbalẽvi zazã | Typical Core Nudidi | Tiatia Focus | Kafukafu Validation |
|---|---|---|---|
| Standard ID, Hamea me tɔ kple Nunanagbalẽviwo | PVC core ɣi si woate ŋu ata alo esi womate ŋu ata o si ƒe sesẽme da sɔ kple lamination ƒe ŋuɖoɖo. | Titrime, ɣie, gbadzaƒe, agbalẽtata ƒe ƒoƒo, ku-lã, kple kaɖi si wowu enu ƒe asitɔtrɔ. | Ta, laminate, punch, kple bend-test teƒenɔlawo ƒe agbalẽviwo. |
| Gadzraɖoƒe Kple Ganyawo Ŋuti Kpekpeɖeŋugbalẽviwo | Kaɖi ƒe dzeside si dzi woɖu PVC sɔ kple Overlay film , magnetic stripe, chip, kple ame ŋutɔ ƒe tɔtrɔ ƒe ɖoɖo si dzi woda asi ɖo. | Batch ƒe ɖekawɔwɔ, lamination fesre, embossing alo module embedding, kple ɣeyiɣi didi ƒe kaɖi ƒe dɔwɔwɔ. | Da asi ɖe agbalẽvi bliboa tutu dzi, ke menye ɖe core sheet la dzi le eɖokui si o. |
| RFID kple Kadodomanɔsitɔ Prelam inlay s | Core alo base sheet si sɔ kple antenna kple chip ɖoɖo kpe ɖe graded lamination ŋu. | Vicat ƒe nuwɔna, agbalẽa ƒe gbadzaƒe, chip takpɔkpɔ, antenna ƒe nɔƒe, kple bond ƒe blibonyenye. | RF dɔwɔwɔ, cross-section, peel, lamination, kple punching dodokpɔwo. |
| SIM kple Telecom Kpekpeɖeŋugbalẽviwo | Dzoxɔxɔ si kɔ wu ƒe dzeside le afisi SIM kaɖi ƒe ŋutilã ƒe ɖoɖo si dzi woda asi ɖo bia le. | Dzoxɔxɔ ƒe liƒo, punching ƒe nyateƒetoto, module cavity dɔwɔwɔ, kple card-ŋutilã ƒe ŋusẽ. | Dzoxɔxɔ ƒe tsatsam, punch, module ƒe kpekpe, kple didime me dzodzro. |
Dzeside siwo wozãna na nusianu sɔ na ID-gbalẽviwo, hamevinyenye ƒe agbalẽviwo, amedzrodzeƒe ƒe safuigbalẽviwo, nuteƒewɔwɔ ƒe agbalẽviwo, kple boblododogbalẽviwo ne agbalẽvi si nètia la sɔ kple agbalẽtamɔ̃, Overlay film , laminator, kple taɖodzinugbalẽvi ƒe xɔtutu.
Ganyawo ƒe kaɖiwo wɔwɔ bia be woatsɔ core sheets, Overlay film s, magnetic stripe materials, chip modules, agbalẽtata, lamination, kple ame ŋutɔ ƒe tɔtrɔ ƒe ƒuƒoƒo si dzi wokpɔ nyuie. Ele be nuƒlelawo nana layer ƒe ɖoɖo bliboa kple mɔɖeɖe ƒe dzidzenuwo ne wole gadzraɖoƒegbalẽvi ƒe dzeside biam.
Kaɖi ƒe nutrenu siwo ŋu womedea asi wo ŋu o tsɔa elektrɔnikmɔ̃wo ƒe akpa aɖewo dea kaɖia ƒe ŋutilã me. Ele be PVC gɔmeɖoanyigbalẽ si sɔ nawɔ laminate evɔ womatrɔ antenna la alo atsɔ dzoxɔxɔ kple mɔ̃ɖaŋununya ƒe nuteɖeamedzi si gbɔ eme ade chip ƒe teƒea o. Ele be dodokpɔ wɔwɔ naɖo kpe kaɖi ƒe mɔ̃ɖaŋunuwo kple RF ƒe dɔwɔwɔ siaa dzi.
SIM kaɖi ƒe nuzazãwo ateŋu abia dzoxɔxɔ ƒe dzesi kple tɔtrɔ ƒe nuwɔna si to vovo tso PVC kaɖi dzrowo gbɔ. Ele be woagblɔ agbalẽa ƒe titrime, Vicat ƒe asixɔxɔ, anyigba ƒe nɔnɔmewo, punching layout, module cavity, kple downstream assembly hafi woadzra kpɔɖeŋu ɖo.
| Layer me | Dɔwɔwɔ Gbãtɔ Safui | ƒe Ðekawɔwɔ ƒe Dzodzro |
|---|---|---|
| Dziƒo Overlay film | Ekpɔa agbalẽtata ta eye ate ŋu atsɔ magnet-ka, hologram, alo nu tɔxɛ aɖe si wotsɔ blae. | Bonding, anyigba ƒe nuwuwu, magnetic stripe ƒe nɔƒe, kple ame ŋutɔ ƒe nudidiwo. |
| Wota PVC Nu vevi | Etsɔa nɔnɔmetatawo, nuŋɔŋlɔwo, dedienɔnɔ ŋuti nutatawo, dzesidenuwo, kple aɖaŋunu siwo trɔna. | Ink ƒe ɖoɖo, anyigba ƒe amadede, eƒe ƒuƒuiƒe, amadede ƒe ɖekawɔwɔ, kple ŋkɔ ŋɔŋlɔ. |
| Titina Nu vevi alo RFID Inlay | Etua kaɖi ƒe titrime eye ate ŋu anye be antenna kple chip anɔ eme. | Vicat ƒe dzeside, elektrɔnikmɔ̃wo takpɔkpɔ, gbadzaƒe, kple ƒuƒoƒo ƒe titrime ƒe akɔntabubu. |
| Reverse Printed Core si Wota | Enaa megbe-kpa ƒe nɔnɔme kple xɔtuɖoɖo ƒe titrime bubuwo. | Agbalẽtata-ɖe-tata ƒe ɖoɖowɔwɔ, amadede, kple lamination ƒe dadasɔ. |
| Ete Overlay film ƒe anyime. | Etrea megbea eye wòkpɔa eta. | Bond ƒe ŋusẽ, eƒe anyigba ƒe nɔnɔme, kple finished-card flatness. |
Sheet geometry si li ke kpena ɖe ame ŋu be wòalé kaɖi ƒe ƒuƒoƒo si woɖo be wòanɔ anyi eye wòdoa alɔ nuɖuɖu, agbalẽtata, lamination, punching, kple kaɖi si wowu enu ƒe titrime si mewɔa tɔtrɔ o. Le nusiwo wowɔna le agbɔsɔsɔ gã me gome la, ele be nuƒlelawo nalɔ̃ ɖe mɔɖeɖe ɖe nu ŋu kple kpɔɖeŋuwo xɔxɔ ƒe mɔnuwo dzi le nɔnɔme si dzi woda asi ɖo me.
Surface dyne kpɔa ŋusẽ ɖe alesi agbalẽtata ƒe nuŋlɔtsiwo tsia PVC ƒe anyigba dzii dzi, evɔ roughness kpɔa ŋusẽ ɖe transfer kple contact dzi. Dyne ƒe asixɔxɔ si woŋlɔ ɖi la naa tiatiawɔblɔɖe ƒe nufiame, gake ele be woaɖo kpe ink mamlɛtɔ, atikewɔwɔmɔnu, agbalẽtamɔ̃ ƒe ɖoɖowo, nudzraɖoƒe ŋutinya, kple anyigbadzidɔwɔwɔ dzi le dɔwɔnu siwo wowɔna dzi.
Vicat ƒe fafa ƒe nuwɔna kpɔa ŋusẽ ɖe alesi agbalẽa wɔa nui le dzoxɔxɔ kple nyaƒoɖeamenu ƒe lamination me dzi. Kaɖi ƒe wɔwɔme vovovowo ateŋu abia be woaxɔ dzesi vovovowo, vevietɔ ne antenna, chips, magnetic stripes, SIM modules, alo specialty Overlay film s le eme.
Ŋusẽ si da sɔ kple alesi woate ŋu atrɔ ɖe nɔnɔmewo ŋui kpena ɖe ame ŋu be woɖea gbagbã, ʋuʋudedi si gbɔ eme, woƒe nɔnɔmetɔtrɔ, kple kaɖi ƒe go siwo mewɔ ɖeka o dzi kpɔtɔna. Dɔwɔnu ƒe nɔnɔme, lãɖeɖe ƒe mɔfiame, agbalẽ ƒe nɔnɔme, kple ewɔwɔ ƒe duƒuƒu ŋutɔŋutɔ hã kpɔa ŋusẽ ɖe tɔtrɔ ƒe dɔwɔwɔ dzi.
Wota PVC card Dɔwɔwɔwo
Smart card kple Inlay Dɔwɔwɔwo
PVC core sheets ateŋu agblɔ na offset tata, silk-screen tata, UV tata, alo zazã abe titina ƒuƒoƒo si wometa o ene. Nusiwo sɔ ɖe wo nɔewo nu nɔ te ɖe agbalẽa ƒe anyigba kple nuŋlɔtsi ƒe ɖoɖo si tututu wowɔ dzi. Ele be nuƒlelawo natsɔ agbalẽtata ƒe ɖoɖoa ana eye woawɔ dodokpɔ siwo ku ɖe alesi wòléa nu ɖe nu ŋu, amadede, eƒe dɔyɔyɔ, kple esi wotsɔna ƒoa nu wògbɔa eme ŋu.
Woateŋu atsɔ nu vevi ƒe agbalẽvi la akpe ɖe PVC agbalẽtata ƒe agbalẽviwo, Overlay film s siwo womefa o, Overlay film s siwo wofa, magnet-ka Overlay film s, alo prelam inlays. Ele be woatrɔ asi le dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi, fafa, stack symmetry, kple nusiwo woɖena ɖe go ŋu wòanyo wu na xɔtutu bliboa.
Le kaɖi siwo me kadodo mele o gome la, ele be woatsɔ antenna ƒe nɔnɔme ŋutɔŋutɔ, chip ƒe nɔƒe, do ƒe nɔnɔme, prelam ƒe titrime, kple kaɖi ƒe ɖoɖo ada nusi wotsɔ wɔe la kpɔ. Ele be woaɖo kpe RF nuxexlẽ ƒe didime, resonance, chip ƒe agbetsitsi, lamination flatness, kple punching registration dzi hafi volume wɔwɔ.
Ele be woado kaɖi ƒe ƒoƒo, module ƒe do ƒe milling, hot-melt embedding, embossing, kple nuwuwu ƒe dɔwɔwɔ bubuwo kpɔ le laminated card si dzi woda asi ɖo la dzi. Core-sheet me tsonu ɖeɖe mate ŋu agblɔ dɔwɔwɔ ɖesiaɖe si wowɔ le agbalẽvi si wowu enu la ɖi o.
Ðoɖo si me kɔ be woalɔ̃ ɖe edzi ɖea nyaʋiʋliwo kple dodokpɔwo gbugbɔgawɔ dzi kpɔtɔna. Ele be woalɔ̃ ɖe seɖoƒe siwo tututu woɖo ɖi dzi le nuƒle ŋuti nyatakakaa me elabena woate ŋu ato vovo le woƒe dzeside, woƒe titrime, agbalẽa ƒe nɔnɔme, agbalẽtatamɔnu, kple kaɖi ƒe ɖoɖowɔɖi nu.
| Dzodzroƒe | si Wokafu Check | Nuƒlela ƒe Nyametsotso |
|---|---|---|
| Dzidzemewo | Eƒe titrime, agbalẽa ƒe didime kple kekeme, eƒe dzogoe ene me, eƒe nugbɔ ƒe nyonyome, kple eƒe ƒuƒoƒo ƒe ɖoɖo. | Kpe ɖe mɔɖeɖe ɖe nu ŋu kple dzidzenu ƒe mɔnu dzi le nɔnɔme si dzi woda asi ɖo la dzi. |
| Ŋkume | Amadede, ɖiƒoƒo, ƒoƒo, pinholes, roughness, dyne level, kple agbalẽtata ƒe akpa si woate ŋu ade dzesii. | Da asi ɖe nukpɔkpɔ ƒe seɖoƒewo kple kpɔɖeŋu ƒe nufiame dzi hafi woawɔe le agbɔsɔsɔ gã me. |
| Mɔ̃ɖaŋununya ƒe Nɔnɔmewo | Density, tensile strength, rigidity, flexibility, punching behavior, kple finished-card bend ƒe dɔwɔwɔ. | Zã dodokpɔmɔnu siwo dzi wolɔ̃ ɖo kple kpɔɖeŋu siwo wowɔ ɖe nɔnɔme nyui me. |
| Dzoxɔxɔ kple Lamination ƒe Ŋuɖoɖo | Vicat ƒe dzesi, shrinkage, warpage, bubbles, delamination, fafa ƒe gbadzaƒe, kple layer ƒe ŋkɔ ŋɔŋlɔ. | Validate kple bliboe ewɔwɔ stack kple ŋutɔŋutɔ laminator. |
| Agbalẽtata Kple Ame ŋutɔ ƒe Nɔnɔmewɔwɔ | Ink ƒe tsɔtsɔ, amadede ƒe gbugbɔgadzɔ, dɔyɔyɔ, Overlay film ƒe kadodo, embossing, magnetic stripe, chip, kple ame ŋutɔ ƒe nɔnɔme. | Da asi ɖe sika ƒe kpɔɖeŋu si wotsɔ kaɖi si wowu enu la dzi. |
| Nubablɛwo Kple Wo Didi | Agbɔsɔsɔ, ŋkɔwo, lot ƒe xexlẽdzesi, tsidzadza takpɔkpɔ, pallet ƒe nɔnɔme, kple agbalẽ siwo ku ɖe nusiwo woɖo ɖa ŋu. | Ðe dzesidegbalẽvi ƒe ɖoɖo kple nuŋlɔɖi siwo hiã le nuƒle ƒe nudɔdɔa me. |
Mitsɔ dɔa ƒe nɔnɔmetatawo ɖo ɖa: kaɖi ƒe ƒomevi, eƒe titrime si wowu enu, eƒe ƒuƒoƒo ƒe wɔwɔme, agbalẽa ƒe titrime, agbalẽa ƒe lolome, amadede, agbalẽtata ƒe ɖoɖo, lamination ƒe nɔnɔmewo, kple ƒe sia ƒe ƒe didi.
Tia dzeside si nàdi: kaɖi dzro, gadzraɖoƒe-kaɖi ƒe wɔwɔme, RFID prelam, SIM kaɖi, nu vevi si woate ŋu ata, alo titina nu vevi si wometa o.
Do agbalẽa kpɔ: alesi woate ŋu atae, alesi woate ŋu alé nuŋlɔtsi ɖe eŋu, eƒe ƒoƒo, eƒe gbadzaƒe, etsotso, etutu, kple eƒe didime ƒe liƒo.
Do kaɖi si wowɔ vɔ la kpɔ: bend, peel, chip alo antenna function, magnetic stripe, personalization, kple card-reader ƒe ɖekawɔwɔ abe alesi wòsɔ ene.
Da asi ɖe sika kpɔɖeŋua dzi: ŋlɔ nusi wotsɔ wɔe ƒe dzeside, xɔtutu, nɔnɔmewo, dzedzeme, kple lɔlɔ̃ ɖe edzi ƒe dzidzenuwo ɖi.
Ðe asi le nudɔdɔ si wowɔ le agbɔsɔsɔ gã me ŋu: zã kpɔɖeŋu si dzi woda asi ɖo kple eƒe nɔnɔmewo abe nuƒle kple nyonyome ƒe nufiame ene.
Ewɔwɔ ƒe ɖekawɔwɔ nɔ te ɖe atikewɔwɔ dzi kpɔkpɔ, ɣletigbalẽ alo extrusion ƒe liƒo, anyigba ƒe dɔwɔwɔ, eƒe titrime dzi kpɔkpɔ, lãɖeɖe ƒe nyateƒetoto, ŋkuléle ɖe eŋu, kple nubablɛ siwo wokpɔ ta na dzi. Wolé dɔwɔƒe ƒe nɔnɔmetata siwo le ete la ɖe asi tso adzɔnu gbãtɔ ƒe axa dzi.
Ele be woabla PVC core sheets eye woadzra wo ɖo be woakpɔ woƒe gbadzaƒe, woƒe anyigbadziŋusẽ, dzadzɛnyenye, kple agbalẽtata ta. Woate ŋu adzro nubablɛwo ƒe ɖoɖowɔwɔ me le agbalẽa ƒe lolome, agbɔsɔsɔ, mɔ si dzi woato atsɔe, kple nuƒlela ƒe nudidiwo nu.
Zã ametakpɔnu alo kotokuwo nàtsɔ aɖe ke, tsidzadza, kple ɖiƒoƒo si le anyigba dzi dzi akpɔtɔ.
Zã kakɛwo, ʋuƒo sesẽwo, palletwo, nugbɔ takpɔnu, kple ka siwo wotsɔ blae nyuie abe alesi wòsɔ na nudɔdɔa ene.
Dzra agbalẽwo ɖo gbadzaa le teƒe si le dzadzɛ eye wòƒu eye nàkpɔ wo ta tso ɣe ƒe keklẽ tẽ, dzoxɔxɔtsoƒewo, kple nyaƒoɖeamenu sesẽ si mesɔ o me.
Na nuawo nanɔ nɔnɔme nyui me le ewɔwɔ ƒe nɔnɔme me hafi woatae alo abla wo le afisi dzoxɔxɔ ƒe vovototowo le vevie.
Zã lot labels kple first-in, first-out stock control tsɔ do alɔ traceability kple dɔwɔwɔ ɣesiaɣi.
Export Loading Takpɔkpɔ
Palletized Sheet ƒe Nubablɛwo
Nusiwo wotsɔna doa alɔe si wotu ɖe kaɖi dzi: Woateŋu adzro PVC core sheets me ɖekae kple agbalẽ siwo woateŋu ata, Overlay film s, magnetic stripe materials, kple RFID inlay structures.
Dzeside ƒe sɔsɔ: tiatia ate ŋu abu kaɖi dzrowo, gadzraɖoƒe-kaɖi ƒe ɖoɖowo, SIM kaɖi wɔwɔ, kple prelam ƒe nudidi siwo me kadodo mele o ŋu.
Trɔtrɔ si wowɔ ɖe ɖoɖo nu: woate ŋu ato eƒe titrime, eƒe lolome, amadede, eƒe gowo ƒe nɔnɔme, eƒe lãɖeɖe, eƒe dzeside, kple eƒe babla me hena dɔa wɔwɔ.
Kpɔɖeŋu-gbãtɔ ƒe dɔwɔwɔ: nuƒlelawo ate ŋu ado agbalẽtata, lamination, punching, kple finished-card ƒe dɔwɔwɔ kpɔ hafi ada asi ɖe agbɔsɔsɔme si woatsɔ ana wo dzi.
Kpekpeɖeŋunana le nudɔdɔ siwo woɖo ɖe duta: kpeɖodzinana le nusiwo wodzra ɖo ŋu, ɖoɖowɔwɔ ɖe nubablɛwo ŋu, dzesidede akpata, kple dzadzraɖo ɖe dukɔwo dome agbalẽɖoɖoɖa ŋu li na nudɔdɔ siwo wodzrana le agbɔsɔsɔ gã me.
| Nyatakaka Kpɔɖeŋu | Kpɔɖeŋu | Nusita Wòle Vevie |
|---|---|---|
| Kpekpeɖeŋugbalẽvi Ƒomevi | ID gbalẽvi, gadzraɖoƒegbalẽvi, SIM kaɖi, RFID kaɖi, amedzrodzeƒe ƒe safuigbalẽvi | Eɖoa nuawo ƒe dzeside si sɔ kple kpeɖodzinana ƒe ɖoɖo. |
| Core sheet Titrime | 0.10–0.50mm alo dɔa ƒe nudidi | Ekpɔa kaɖi ƒe ƒuƒoƒo, eƒe sesẽ, kple nusiwo wozãna dzi. |
| Agbalẽa ƒe Agbɔsɔsɔme Kple Agbɔsɔsɔme | A4, A3, ewɔwɔ ƒe ɖoɖo, custom agbalẽvi, kilogram alo agbalẽvi | Hiã na lãɖeɖe ƒe ɖoɖo, nubablɛ, asixɔxɔ, kple nuwo ɖoɖoɖa. |
| Amadede kple Amadede si me mekɔ o | Yevu, yevu, amadede, alo dekɔnu ƒe nufiame | Ekpɔa ŋusẽ ɖe alesi wowɔe, agbalẽtata ƒe megbenyawo, kple nudɔdɔ ƒe sɔsɔ dzi. |
| Agbalẽtata ƒe Dɔwɔna | Offset, seda screen, UV , alo nuto si wometa o | Eɖoa anyigbadzidzadzraɖo kple kpɔɖeŋu dodokpɔ ƒe nudidiwo. |
| Kpekpeɖeŋugbalẽvi ƒe Ƒuƒoƒo ƒe Dɔwɔɖoɖo | Overlay film + nu vevi si wota + RFID inlay + nu vevi si wota + Overlay film | Ebia be woada titrime ƒe dadasɔ kple lamination ƒe ɖekawɔwɔ kpɔ. |
| Lamination ƒe Nɔnɔmewo | Dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi, fafamɔnu | Doa alɔ Vicat ƒe dzeside tiatia kple kuxiwo gbɔ kpɔkpɔ si sɔ. |
| Nuŋlɔɖi Siwo Wobia | TDS, COA, dodokpɔ ŋuti nyatakaka, nubablɛ ƒe dzeside, sedziwɔwɔ ƒe biabiawo | Enaa woɖoa kpe nuŋlɔɖi ƒe anyinɔnɔ dzi hafi bia nu. |
Dzɔdzɔmeŋusẽ ƒe nɔnɔme si le axa sia yɔ 0.10–0.50mm. Titrime si sɔ nɔ te ɖe kaɖia ƒe wɔwɔme bliboa kple kaɖi ƒe taɖodzinu si wowu enu dzi. Ele be woatsɔ nudidi bubuwo aɖo ɖa be woatsɔ aɖo kpe mɔ̃ɖaŋununya kple ewɔwɔ dzi.
Agbalẽvi vevitɔae nyea agbalẽvi la ƒe xɔtunu eye ate ŋu atsɔ agbalẽtata alo elektrɔnikmɔ̃wo ƒe akpa aɖewo. Zi geɖe la, Overlay film nyea gotagome ƒuƒoƒo si le tsɛ wu si kpɔa agbalẽtata ta eye ate ŋu anye nusiwo wotsɔ blaa nu, magnet-ka, hologram, alo anyigbadzidɔwɔwɔ bubuwo.
Ɛ̃. Woateŋu azã PVC ƒe dzesi si sɔ abe gɔmeɖoanyi alo xɔtuɖoɖo ƒe ƒuƒoƒo si me contactless prelam inlays le ene. Ele be woatsɔ antenna, chip, lamination cycle, inlay ƒe titrime, punching ƒe ɖoɖo, kple RF ƒe dɔwɔwɔ ƒe nudidiwo aɖo kpe nusi wotsɔ wɔe dzi.
Nyatakaka si wona la yɔ Vicat ƒe dzesi si nye 90 ± 2°C na SIM kaɖi zazã. Ele be woaɖo kpe dzedze mamlɛtɔ dzi le SIM kaɖia ƒe ŋutilã ƒe wɔwɔme, punching ƒe ɖoɖo, module ƒe do, kpekpe ƒe nɔnɔmewo, kple asisiwo ƒe dodokpɔ ƒe nudidiwo nu.
PVC woateŋu adzra kaɖi ƒe agbalẽviwo ɖo hena offset alo silk-screen tata, gake ele be dzesi si tututu woaxɔ la nasɔ kple alesi woɖoe. Ele be nuƒlelawo nado nuŋlɔtsi ƒe tsidzadza, alesi wòlé ɖe eŋu, eƒe dɔyɔyɔ, amadede, eƒe ƒoƒo, kple kaɖi si wowu enu ƒe dɔwɔwɔ kpɔ hafi woawɔe le agbɔsɔsɔ gã me.
Dyne si le anyigba dzi kpɔa ŋusẽ ɖe ink ƒe tsidzadza kple eƒe ƒoƒo dzi, gake eƒe ƒuƒuiƒe ya kpɔa ŋusẽ ɖe agbalẽtata ƒe kadodo, agbalẽwo ƒe nuɖuɖu, kple lamination dzi. Ele be woabu wo ame evea siaa ŋu ɖekae kple ink ƒe atikewɔwɔ, nyadzɔdzɔgbalẽ ƒe nɔnɔmewo, nudzraɖoƒe, kple Overlay film si wotia.
Woate ŋu alé ŋku ɖe nudidi siwo wowɔ ɖe ɖoɖo nu ŋu le eƒe titrime, eƒe didime, amadede, eƒe gota gome ƒe amadede, eƒe ƒuƒuiƒe, eƒe lãɖeɖe, eƒe dzeside, kple eƒe babla ŋu. Feasibility, MOQ, lead time, kple tolerances nɔ te ɖe nɔnɔme si wobia dzi.
Do agbalẽa kpɔ to dɔwɔwɔ bliboa me: agbalẽtata, edada, lamination, fafa, punching, personalization, chip alo antenna dɔwɔwɔ, kple dodokpɔ le kaɖi si wowu enu. Ele be woada asi ɖe sika ƒe kpɔɖeŋu kple eƒe nɔnɔme si woŋlɔ ɖi dzi hafi woawɔ nudɔdɔ le agbɔsɔsɔ gã me zi gbãtɔ.
Ẽ, nenye be PVC ƒe nuto, magnet-ka Overlay film , agbalẽtata, lamination, kple finished-card ƒe titrime sɔ. Ele be woaɖo kpe fli ƒe nɔƒe, amedzizizi, kadodo ƒe ŋusẽ, nuŋɔŋlɔ, kple ame ŋutɔ ƒe tɔtrɔ dzi le agbalẽvi siwo wowɔ vɔ dzi.
Zi geɖe la, wozãa ametakpɔnu kotokuwo alo film, kakɛwo alo ʋuƒo sesẽwo, palletwo, nugbɔ takpɔnu, ka, dzesidenuwo, kple tsidzadza takpɔkpɔ le agbalẽa ƒe nɔnɔme kple mɔnu si wotsɔ ɖoa wo ɖa nu. Ele be woaɖo kpe nubablɛ ƒe ɖoɖo mamlɛtɔ dzi le nyayɔyɔa me.
Woate ŋu aƒo nu tso kpɔɖeŋu ƒe anyinɔnɔ ŋu ne wogblɔ kaɖia zazã, eƒe titrime, eƒe lolome, amadede, eƒe anyigba ƒe nudidi, kple dodokpɔ ƒe ɖoɖo vɔ. Wokafui be woada asi ɖe kpɔɖeŋuwo dzi hafi woawɔe wòasɔ ɖe ɖoɖo nu alo woawɔe le agbɔsɔsɔ gã me.
De kaɖi ƒe ƒomevi, taɖodzinu si wowu enu ƒe titrime, ƒuƒoƒo ƒe wɔwɔme, nu vevi ƒe titrime, agbalẽa ƒe lolome, amadede, agbalẽtata ƒe mɔnu, lamination ƒe ɖoɖowo, ƒe sia ƒe ƒe agbɔsɔsɔme, babla, kple nuŋlɔɖi siwo hiã. Nyatakaka siawo na woate ŋu atia dzesidewo kabakaba eye woayɔ nya tso wo me.
Te ɖe Wallis Plastic ŋu hena PVC core sheets siwo wozãna le card wɔwɔ me, card ŋutilã siwo wota, RFID prelam inlays, bank cards, SIM cards, kple smart card wɔwɔ me. Ðo wò mɔ̃ɖaŋununya ƒe nudidiwo ɖa be nàxɔ dzeside ƒe aɖaŋuɖoɖo, kpɔɖeŋu ɖoɖo, kple B2B ƒe nyayɔyɔ.
