|
Dade Mprɛte a Wɔde Yɛ Adwuma
Wallis na ɔkyerɛwee
| Nneɛma: | |
|---|---|
| Surface: | |
| mfaso: | |
| Dwumadi: | |
| Dodow: | |
Wallis matte card lamination dade mprɛte yɛ pɛpɛɛpɛ stainless dade press mprɛte a wɔayɛ ama adwumayɛfo PVC , PETG , PC , ABS ne composite plastic kaad adwumayɛ. Wɔ hot-press lamination mu no, mprɛte no ma contact surface a ɛyɛ den wɔ laminator ne card stack ntam bere a ɛde matte surface suban a wɔhwehwɛ no kɔ abɔnten card layer no so.
Wɔayɛ ama smart card adwumayɛbea ahorow, ID card ayɛfo, payment card ayɛfo, RFID card adwumayɛbea ahorow, card-material converters ne lamination-machine dwumadiefoɔ, Wallis matte dadeɛ mprɛte mprempren wɔ 0.6 mm, 0.8 mm ne 1.0 mm thicknesses a ɛwɔ standard ne customized dimensions. Matte level, plate size, edge treatment ne nneɛma afoforo a wɔhwehwɛ sɛ wɔyɛ no betumi ahwɛ sɛnea adetɔfo no laminator ne card nhyehyɛe te.
Lamination plate su ka pii sen sɛnea ɛte. Mprɛte a ɛyɛ tratraa, ɔfasu a ɛyɛ pɛ, ahotew, ne kɛse a ɛyɛ pɛpɛɛpɛ, anoano tebea ne ahoɔden a ɛko tia ɔhyew-ne-nhyɛso kyinhyia mpɛn pii no betumi anya kaad a wɔawie no nwene, lamination a ɛyɛ pɛpɛɛpɛ ne sɛnea wɔyɛ no yiye so nkɛntɛnso. Wɔ kaad nhyehyɛe foforo anaa laminators ho no, wɔkamfo kyerɛ sɛ wɔnsɔ nhwɛsode hwɛ ansa na wɔatɔ nneɛma pii.
| Nkyerɛkyerɛmu | a Ɛwɔ Hɔ Nkyerɛkyerɛmu | B2B Confirmation Point |
|---|---|---|
| Adwadeɛ | Matte Kaad Lamination Dade Mprɛte | Si matte, frosted, silk, patterned anaa biribi foforo a wɔhwehwɛ sɛ wowie no so dua |
| Atadeɛ | Dade a ɛnyɛ den lamination mprɛte | Si dade grade, hardness ne surface treatment so dua sɛ eyinom yɛ controlled purchasing parameters |
| Surface Finish a Wɔde Awie | Matte a wɔde sa yare | Pene matte level anaa texture so tia honam fam reference plate ne finished-card sample |
| Nneɛma a ɛyɛ den | 0.6 mm / 0.8 mm / 1.0 mm; wobetumi aka nsɛm a wɔahyɛ da ayɛ ho asɛm | Fa mprɛte no katee ne ne nsusuwii hyia lamination afiri no |
| Standard Sizes a Wɔde Di Dwuma | 350 × 250 mm / 400 × 300 mm / 500 × 400 mm anaasɛ wɔayɛ no sɛnea wɔpɛ | Fa laminator adwumayɛbea ankasa ne mprɛte nsusuwii a wɔhwehwɛ ma |
| Nneɛma Afoforo a Wɔtaa Yɛ | A4, A3 ne mfiri-specific customized dimensions betumi ahwɛ mu | Mma nkyerɛ 'A3' nkutoo bere a laminator no hwehwɛ sɛ wonya mprɛte nsusuwii a ɛyɛ pɛpɛɛpɛ |
| Listed Temperature Tumi a Ɛwɔ Hɔ | Nkyerɛkyerɛmu ɔhyew tumi: bɛyɛ 150–180°C | Si mprɛte nkyerɛkyerɛmu a ɛfata no so dua tia laminator hyew ankasa ne kyinhyia tebea horow |
| Nhyɛso a Wɔde Di Dwuma | Ɛfata ma ɔhyew-press card lamination ne multi-stack production | Fa laminator nhyɛso, stack nhyehyɛe ne cushioning nhyehyɛe ma nnwuma a ɛyɛ den |
| Nea ɛne ne ho hyia Kaad nneɛma s | PVC , PETG , PC , ABS ne kaad a wɔabom ayɛ a ɛne no hyia | Validate card stack a edi mũ ne lamination aduannoa ho nyansahyɛ |
| Edge Ayaresa a Wɔde Yɛ Adwuma | Deburred / polished anoano | Si ntwea so nsusuwii, anoano radius ne dwumadie ahwehwɛdeɛ so dua |
| Ɔsom Asetra | Wɔayɛ no ama lamination cycles mpɛn pii a wɔde di dwuma yiye na wosiesie | Nkwa ankasa gyina ɔhyew, nhyɛso, ahotew, nsensanee, nneɛma a wɔkora so ne nea wɔhwehwɛ wɔ soro so |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Size, thickness, matte level, pattern, edge design, ahobammɔ film ne nneɛma a wɔde kyekyere nneɛma | Fa mfiri ne kaad a wɔawie ho ahwehwɛde ahorow mena ansa na woabɔ ka |
| MOQ | MOQ a wɔtaa yɛ: 100 pcs; nhwɛsode anaa sɔhwɛ ahwehwɛde ahorow no gyina so si so dua | Si MOQ so dua ma amanne akɛse, nhwɛso ne nkyerɛkyerɛmu soronko |
Nsεmfua a εho hia: Nsεmfua a εfa lamination plate ho a εfa saa ade yi ho ne 0.6, 0.8 ne 1.0 mm. Ɛsɛ sɛ wosi ahwehwɛde afoforo a ɛfa thickness ho no so dua wɔ ɔkwan soronko so sɛnea laminator, plate rigidity ne application te ansa na wɔakra.
Matte card lamination dade mprɛte yɛ dade mprɛte a ɛyɛ pɛpɛɛpɛ a wotumi san de di dwuma a wɔde ahyɛ hot-press lamination stack a wɔde yɛ plastic kaad no mu. Wɔde core sheets a wɔatintim, Overlay film s, RFID inlays anaa card layers afoforo si lamination plates, cushion pads ne laminator platens ntam ansa na wɔde ɔhyew ne nhyɛso a wɔahyɛ so ahyɛ mu.
Dade mprɛte no ma contact surface no tia akyi layer a laminated krataa no. Enti ne soro tebea betumi anya nkɛntɛnso sɛ ebia kaad krataa a wɔawie no bɛyɛ te sɛ ahwehwɛ a ɛhyerɛn, ɛyɛ matte a ɛyɛ torotoro, awɔw ayɛ no, ayɛ no silk-textured anaasɛ wɔayɛ no nsusuwso.
Lamination afiri no ma ɔhyew ne nhyɛso a wɔahyɛ so a ɛho hia na wɔde abɔ kaad nhyehyɛe no. Dade mprɛte no yɛ adwuma sɛ ntamgyinafo a ɛyɛ den wɔ saa press stack no mu na ɛboa ma wɔkyekyɛ nkitahodi wɔ kaad krataa no so. Nea efi mu ba awie nso gyina laminator platens, cushion pads, card nneɛma, nhyɛso, ɔhyew, bere a wɔde tra hɔ ne onwini nhyehyɛe so.
Wɔpaw matte mprɛte bere a obi a ɔyɛ kaad pɛ sɛ wɔde ɔfasu a wɔawie a ɛnyɛ nea ɛhyerɛn kɛse sen nea wɔde ahwehwɛ mprɛte yɛ no. Matte suban pɛpɛɛpɛ betumi afi nea ɛyɛ fɛ yiye so akosi nea wotumi hu so, enti honam fam mprɛte nhwɛsode ne laminated-card reference ho hia ma specification control.
| Plate Finish | Surface Character | a Wɔtaa Yɛ Kaad Ahwehwɛde |
|---|---|---|
| Ahwehwɛ a Ɛyɛ Glossy | Highly polished reflective nkitahodi soro | Kaad a ɛhyerɛn kɛse a ɛyɛ torotoro |
| Matte | Fine non-mirror surface a wɔatew reflection so | ID, asɔremma, sikatua, kwan a wɔfa so nya ne specialty cards a ɛhwehwɛ sɛ ɛyɛ matte appearance a wɔahyɛ so |
| Silk / Satin a wɔde yɛ nneɛma | Fine directional anaasɛ ntama-te sɛ texture | RFID prelam, kaad nkrataa titiriw ne kaad a wɔde nsa ka |
| Frosted a wɔde ahyɛ mu | Nea wotumi hu kɛse diffuse surface texture | Plastik nkrataa a ɛyɛ soronko a ɛnyɛ hann anaasɛ wɔakyerɛw so |
| Amanneɛbɔ Patterned | Engineered decorative texture anaasɛ nhwɛso a wɔayɛ no mpɛn pii | Branded, decorative anaa specialty card a wɔyɛ |
Ɛnsɛ sɛ wobu mprɛte akuw ahorow sɛ nea wotumi sesa esiane sɛ wɔn nsusuwii yɛ pɛ nti. Dade mprɛte no ani ka nkyerɛwee a wotumi hu a wɔde kɔ krataa a wɔde laminated no so no so nkɛntɛnso tẽẽ, enti ɛsɛ sɛ kaad adwumayɛbea ahorow no kura gyinapɛn ahorow a wɔapene so a ɛsono emu biara mu wɔ biribiara a wɔhwehwɛ sɛ wɔde wie no ho.
Uniform matte ayaresa boa ma wonya aniwa a ɛkɔ so daa awie wɔ laminated krataa no nyinaa so. Nsonsonoe a ɛwɔ mprɛte no mu no betumi ada adi bere a wɔabɔ nkrataa afi mmeae ahorow wɔ krataa koro no ara mu akyi.
Mprɛte a ɛyɛ tratraa boa nkitahodi a ɛkɔ so daa wɔ lamination stack no so. Mprɛte a wɔakyinkyim anaasɛ asɛe betumi aboa ma nhyɛso nkyekyɛmu a ɛnteɛ, mpɔtam hɔ asase ani nsakrae ne nea efi mu ba a entumi nnyina.
Wɔsan de kaad lamination mprɛte di dwuma denam nneɛma a wɔyɛ no mpɛn pii so. Enti ɛsɛ sɛ nneɛma a wɔpaw ne sɛnea wɔde di dwuma yiye no boa adetɔfo no adwumayɛ hyew, nhyɛso nhyehyɛe ne onwini akwan a wɔmfa nkyinkyim a wontumi nnye ntom.
Mfutuma, resin, ink nkae anaasɛ nsensanee a ɛwɔ lamination plate so no betumi de sintɔ ahorow a wotumi hu akɔ kaad nkrataa so. Enti ahotew ne mprɛte no ani nhwehwɛmu yɛ anammɔn a wɔfa so yɛ nneɛma a ɛyɛ papa sen sɛ ɛbɛyɛ akwan a wɔfa so siesie nneɛma nkutoo.
Nsonsonoe a ɛyɛ mmerɛw no brɛ asiane a ɛwɔ sɛnea wɔde di dwuma no ase na ɛboa ma burrs a ano yɛ nnam nsɛe cushion pads, card materials, protective films anaa production operators.
Wɔtaa de matte lamination dadeɛ mprɛte di dwuma ne PVC a wɔatintim cores ne Overlay film s ma ID cards, access cards, membership cards, loyalty cards, akyɛdeɛ cards ne laminated PVC card nneɛma foforɔ.
PETG kaad nhyehyeɛ nso betumi ayɛ laminated denam dade mprɛte a ɛne no hyia so, nanso lamination hyew, nhyɛso ne onwini tebea betumi ayɛ soronko wɔ PVC . Ɛsɛ sɛ adetɔfo sɔ PETG core-and- Overlay film nhyehyɛe a edi mũ no hwɛ.
PC kaad nhyehyeɛ taa de dwumadie tebea ahodoɔ di dwuma firi PVC . Sɛ wɔayɛ dade mprɛte ama polycarbonate kaad a, si mprɛte no ho nkyerɛkyerɛmu no so dua tia laminator no ɔhyew ankasa, nhyɛso ne onwini nhyehyɛe no.
Wobetumi de lamination dade mprɛte adi dwuma wɔ RFID ne NFC kaad production stacks a prelam inlays, printed sheets, Overlay film s ne antenna structures wom mu. Ɛsɛ sɛ wɔpaw cushioning, pressure distribution ne total card construction na wɔakwati sɛ wɔbɛsɛe embedded components.
ABS ne composite sheet structures betumi asusuw ho bere a wɔn lamination nhyehyɛe no ne dade mprɛte ne press nhyehyɛe no hyia. Ɛsɛ sɛ wɔsɔ nhwɛsode kaad a wɔaboaboa ano hwɛ ansa na wɔayɛ no aguadi.
Wɔatintim card core sheets, Overlay film s, inlays ne card-body layers afoforo sɛnea lamination nhyehyɛe a wɔapene so no te.
Ɛsɛ sɛ wɔhwɛ contact surfaces abien no nyinaa mu sɛ ebia nneɛma nketenkete, nsensanee, nkae, dents ne sintɔ afoforo ansa na lamination stack no akɔ press no mu.
Wɔaboaboa kaad nkrataa, dade mprɛte ne cushion pads ano sɛnea laminator nhyehyɛe no te. Nneɛma a wɔde yɛ cushion boa ma wotua nsakrae nketenkete a ɛwɔ ne kɛse mu no so ka na ɛkyekyɛ nhyɛso wɔ press nhyehyɛe no mu.
Laminator no de ɔhyew, nhyɛso ne bere a wɔahyɛ ato hɔ a PVC , PETG , PC anaa kaad adansi foforo hwehwɛ no di dwuma. Ɛsɛ sɛ wɔde parameters si hɔ fi card-material specification no mu sen sɛ wɔde befi dade mprɛte no nkutoo mu.
Onwini a wɔahyɛ so boa ma krataa a wɔde laminated no gyina ansa na wɔayi afi prɛte no so. Nneɛma a wɔayi afi mu ntɛm no betumi aboa ma deformation, abata anaasɛ dimensional instability aba.
Hwɛ surface texture, flatness, bubbles, delamination, registration ne transferred sintɔ biara ansa na krataa no akɔ so ayɛ punching, milling, chip embedding, personalization anaa afoforo downstream adwumayɛ.
| Observed Issue | Plate-Related Check | Nneɛma Afoforo a Ɛfa Adeyɛ Ho |
|---|---|---|
| Nneɛma a Ɛwɔ Anim Agyiraehyɛde | Hwɛ mprɛte no mu sɛ ebia nsensanee, asɛe anaasɛ efĩ bi wɔ hɔ anaa | Sheet ahotew ne nneɛma nketenkete a ɛwɔ stack no mu |
| Matte a Ɛnyɛ Pɛ | Hwɛ sɛnea texture yɛ pɛ ne mprɛte a ɛho asɛe | Nhyɛso biakoyɛ, cushion pad ne card thickness |
| Nkratafa Warpage | Hwɛ sɛnea mprɛte no yɛ petee | Ɔhyew kari pɛ, onwini nhyehyɛe ne nneɛma shrinkage |
| Bubbles anaa Delamination a ɛyɛ den | Hwɛ sɛ contact a ɛho tew ne stack pressure | Overlay film ade a wɔde kata so, ink, nsu, ɔhyew, nhyɛso ne bere a wɔde tra hɔ |
| Kaad Krataa a Wɔde Bata Ho | Hwɛ sɛnea mprɛte no ho tew ne sɛnea ɛwɔ soro no | Nneɛma a wɔyɛ, ɔhyew ne onwini kyinhyia |
| Edge Damage a Wɔsɛe no | Hwɛ burrs, ntwea so nnam ne mprɛte anoano | Stack alignment ne sɛnea wɔde di dwuma |
Kyerɛ sɛ ebia ɛsɛ sɛ kaad a etwa to no yɛ ahwehwɛ a ɛhyerɛn, matte fɛfɛ, frosted, silk-textured anaasɛ custom patterned. Honam fam kaad nhwɛsode ne nea eye sen biara a wɔde gyina so bere a ɛne adeyɛ gyinapɛn a ɛwɔ hɔ dedaw hyia no.
Sua lamination plate a ɛwɔ hɔ dedaw no anaasɛ fa lamination-machine model ne adwumayɛbea no ma. Nsusuwii te sɛ A3 ne A4 yɛ mfiase a mfaso wɔ so, nanso mfiri pɔtee bi susuw yɛ nea wotumi de ho to so kɛse ma nneɛma a wɔyɛ.
Nneɛma a ɛwɔ hɔ a ɛyɛ gyinapɛn a ɛyɛ 0.6 mm, 0.8 mm ne 1.0 mm. Paw ne kɛse sɛnea lamination nhyehyɛe a ɛwɔ hɔ dedaw ne nhyehyɛe a wɔapene so sɛ wɔyɛ no kyerɛ sen sɛ wobɛsesa mprɛte no mu duru a wunnyaa nhyehyɛe no ho adanse.
Ka kyerɛ Wallis sɛ ebia kaad nhyehyɛe no de PVC , PETG , PC , ABS , RFID prelam anaasɛ nneɛma pii a wɔabom ayɛ di dwuma efisɛ adeyɛ tebea betumi ayɛ soronko.
Ɔhyew dodow, nhyɛso, ɔhyew-press bere, onwini kyinhyia, stack dodow ne cushion-pad nhyehyɛe boa mfiridwuma akuw ma wɔte nneɛma a atwa yɛn ho ahyia ase.
Ɛsɛ sɛ mprɛte anoano yɛ torotoro na ɛnyɛ burrs a ɛsɛe ade. Sɛ laminator de ntwea so radius pɔtee bi di dwuma, locating hole anaa edge configuration soronko bi a, fa mfonini anaa reference sample ma.
Fa nhwɛsode no di dwuma wɔ laminator ankasa no mu na susuw finished-card texture, release suban, flatness ne surface appearance ansa na woapene bulk production so.
Precision card lamination hwehwɛ sɛ dade mprɛte a wɔahyɛ so kɛse ne nkitahodi a ɛkɔ so daa. Ɛgyina ahyɛde a wɔapene so nkyerɛkyerɛmu so no, nhwehwɛmu a wɔyɛ no yiye betumi ayɛ mprɛte no kɛse, ne tɛtrɛtɛ ne ne tenten, ne petee, ne soro nwene, nsensanee a wotumi hu, dents, ano tebea, ntwea so nsusuwii, ahotew, ahobammɔ film ne nneɛma a wɔde kyekyere nneɛma tebea.
Ɛsɛ sɛ wɔde mate anaa patterned surfaces toto production standard a wɔapene so no ho. Nsonsonoe titiriw a ɛwɔ nkyerɛwee mu betumi ada adi wɔ nkrataa a wɔawie so bere mpo a mprɛte no nsusuwii teɛ no.
Ɛsɛ sɛ wɔhwɛ mprɛte a ɛyɛ tratraa so efisɛ daa bending anaa distortion betumi aka contact wɔ lamination stack no mu. Ɛsɛ sɛ adetɔfo a wɔwɔ flatness tolerance pɔtee bi de ka adetɔ ho mfonini no ho.
Ɛsɛ sɛ mprɛte no mu duru ne ne nyinaa nsusuwii ne nea wɔapene so no hyia, titiriw bere a wɔde mprɛte pii di dwuma bere koro mu wɔ multi-stack laminators mu no.
Ɛsɛ sɛ wɔbɔ mprɛte a wɔawie no ho ban na ansɛe na ano ansɛe bere a wɔde sie na wɔde rekɔ aman horow so no. Ɛsɛ sɛ wɔma nneɛma a wɔde kyekyere nneɛma a wɔhwehwɛ no kɔ soro ma ahwehwɛ, fine-matte ne precision-pattern surfaces.
Yi mfutuma, resin anaa process efĩ ansa na abɛyɛ tow wɔ prɛte no so denam ɔhyew a ɛkɔ so mpɛn pii so. Ɛsɛ sɛ akwan a wɔfa so siesie nneɛma no ne dade a ɛnyɛ den a wɔde ayɛ no ani ne matte aduru no hyia.
Abrasive pads anaa aggressive polishing betumi asesa matte a wɔahyɛ so anaasɛ patterned surface. Akyiri yi, nkyerɛwee a asɛe betumi akɔ krataa biara a wɔde laminated ayɛ a wɔde saa mprɛte no ayɛ so.
Fa mprɛte a ɛho tew sie wɔ ade a ɛfata a ɛyɛ tratraa so na mma nneɛma a emu yɛ duru anaa nneɛma a ɛnyɛ pɛpɛɛpɛ ntumi nkɔkotow koraa. Tetew mmeae a ɛne wɔn ho wɔn ho di nkitaho no mu wɔ baabi a ɛho hia na ama wo ho atew.
Sɛ scratch, dent anaa daa texture defect fi ase pue mpɛn pii wɔ laminated card sheets so pɛ a, ɛsɛ sɛ wosiesie mprɛte no wɔ baabi a mfiridwuma mu ɛbɛyɛ yiye anaasɛ woyi fi production.
Wobetumi de Matte anaa specialty lamination plates adi dwuma wɔ payment-card nipadua a wɔyɛ mu baabi a card adansi a wɔapene so ne surface specification hwehwɛ sɛ wɔde wie a ɛne no hyia.
Ɔman ID, adwumayɛfo ID, akwahosan ho ID ne akwan afoforo a ahobammɔ wom a wɔde yɛ identity-card betumi de lamination plates a wɔahyɛ so adi dwuma sɛ card-body manufacturing nhyehyɛe no fã.
RFID access cards, transit cards, campus cards, hotel cards ne smart cards afoforo a enni nkitahodi hwehwɛ sɛ wɔde inlays, core sheets ne outer layers lamination a ɛyɛ den ansa na wɔabɔ punch na wɔayɛ no sɛnea wopɛ.
Wɔn a wɔyɛ aguadi kaad betumi apaw matte anaa patterned finishes de akyerɛ nsonsonoe a ɛda nokwaredi, asɔremma, aguadidan ne promotional card nhyehyɛe ahorow mu.
Wobetumi nso de silk, matte anaa mprɛte afoforo a wɔakyerɛw so adi dwuma bere a wɔreyɛ RFID prelam nkratafa anaa kaad-nipadua a ɛhwehwɛ sɛ wɔhyɛ so wɔ lamination akyi.
Wallis boa lamination dade mprɛte a wɔayɛ no sɛnea wɔpɛ sɛnea card-factory mfiri ne finished-surface ahwehwɛde ahorow te. Sɛ anka wɔbɛpaw denam generic A3 anaa A4 nsɛmfua nkutoo so no, wɔhyɛ B2B adetɔfo nkuran sɛ wɔmfa mprɛte a ɛwɔ hɔ dedaw, dimensional drawing anaa lamination-machine specification mma.
Wobetumi ahwɛ ne tenten ne ne tɛtrɛtɛ mu sɛnea laminator platen nsusuwii, card-sheet nhyehyɛe ne stack nhyehyɛe te.
Standard options no bi ne 0.6, 0.8 ne 1.0 mm. Ɛsɛ sɛ wɔde ahwehwɛde afoforo a ɛfa ne kɛse ho kɔma ma wɔde mfiridwuma mu si so dua sen sɛ wɔbɛfa no sɛ ɛwɔ hɔ a anohyeto biara nni ho.
Wobetumi asusuw matte, silk, frosted ne customized-pattern adwene ahorow ho sɛnea adwinnade, nhwɛsode a wɔde gyina hɔ ma, order volume ne nea wɔhwehwɛ sɛ ɛyɛ finished-card appearance te.
Wobetumi ayɛ surface-protection ne packaging ahwehwɛde ahorow no sɛnea ɛbɛyɛ a ɛbɛtew scratching, nsu a ɛda adi, anoano asɛe ne kankyee bere a amanaman ntam shipment.
Wallis de card core sheets, Overlay film s, RFID inlays, lamination plates, cushion pads ne nneɛma a ɛfa ho ma, na ɛma card adwumayɛbea ahorow tumi yɛ nneɛma pii a wɔde di dwuma wɔ adeyɛ koro no ara mu no bom.
Adetɔfo betumi anya contact surfaces ahorow ama finished-card ahwehwɛde ahorow sen sɛ wɔde mprɛte biako awie bedi dwuma ama ade biara.
Nsusuwii a wɔayɛ no sɛnea wɔpɛ ma kwan ma wɔde mprɛte no ho nkyerɛkyerɛmu no hyia adetɔfo no laminator ne kaad-kratafa kwan so.
Wobetumi de nhwɛso mprɛte ama ma wɔasɔ ahwɛ. Nhwɛsode ho hia titiriw bere a wɔde matte texture a ɛwɔ hɔ dedaw no hyia anaasɛ wɔde prɛte foforo reba afiri a wɔde yɛ nneɛma mu no.
Wobetumi ahwɛ nneɛma a wɔyɛ no ho nsɛm so ama kaad adwumayɛbea ahorow, wɔn a wɔdannan nneɛma, wɔn a wɔyɛ smart-card, wɔn a wɔkyekyɛ ne adetɔfo afoforo a wɔhwehwɛ sɛ wɔyɛ dade-mprɛte nsusuwii a wɔsan yɛ no mpɛn pii ne nea wɔde wie ne soro.
Wallis ne amanaman ntam kaad-nneɛma atɔfoɔ, kaad adwumayɛbea ne wɔn a wɔkyekyɛ nneɛma a wɔde nneɛma ma tintim, lamination ne smart-card yɛ adwuma ahodoɔ yɛ adwuma.
Adetɔfo nsɛm a wɔka betumi ama wɔanya nsɛm foforo a ɛfa adetɔ ne ɔsom mu osuahu ho. Nanso, sɛ wopɛ mfiridwuma ho ahwehwɛde a, ɛsɛ sɛ wɔda so ara pene lamination mprɛte so denam dimensional inspection ne sɔhwɛ a wɔyɛ wɔ adetɔfo no card-production line ankasa so.
Wɔde di dwuma wɔ hot-press card laminator mu de ma contact surface a ɛyɛ den ma PVC , PETG , PC , RFID ne card nhyehyɛe afoforo a ɛne no hyia bere a ɛboa ma wɔyɛ matte hwɛbea a wɔakyerɛ wɔ akyi laminated krataa no so.
Ahwehwɛ mprɛte de biribi a wɔayɛ no fɛfɛɛfɛ kɛse di dwuma ma ɛyɛ kaad a ɛyɛ mmerɛw a ɛhyerɛn. Matte mprɛte de ade a wɔayɛ ho adwuma a ɛnyɛ hann pii di dwuma de yɛ nea ɛyɛ mmerɛw na ɛnyɛ nea ɛhyerɛn pii.
Nsuo a ɛwɔ mu no yɛ 0.6 mm, 0.8 mm ne 1.0 mm. Ɛsɛ sɛ wosi thickness afoforo so dua sɛnea adwinnan no betumi ayɛ yiye ne adetɔfo no lamination mfiri.
Standard card lamination plates a ɛwɔ saa nneɛma yi mu no mu duru bɛyɛ 0.5–1.0 mm, a 0.6, 0.8 ne 1.0 mm yɛ standard options a wɔabobɔ din wɔ ha. 5–10 mm ahwehwɛde bɛyɛ heavy-plate nkyerɛkyerɛmu a ɛyɛ soronko na ɛsɛ sɛ wosi so dua ansa na wɔakra.
Aane. Wallis boa nsusuwii ahorow a wɔayɛ no sɛnea wɔpɛ sɛnea kaad-lamination mfiri ahwehwɛde ahorow te. Fa mprɛte tenten, ne tɛtrɛtɛ ne ne kɛse pɛpɛɛpɛ anaa mprɛte mfonini a ɛwɔ hɔ dedaw ma.
Wobetumi ahwɛ A3, A4 ne sɛnea wɔayɛ no sɛnea wɔpɛ no mu. Ɛsɛ sɛ wɔda so ara si nsusuwii pɔtee so dua efisɛ ebia laminator ahorow de mprɛte nsusuwii ahorow bedi dwuma ɛmfa ho sɛ wɔaka ho asɛm sɛ A3 anaa A4 mfiri no.
Aane. PVC card lamination yɛ dwumadie titire no mu baako. Ɛsɛ sɛ wɔde ɔhyew, nhyɛso ne onwini kyinhyia a wɔahyɛ da ayɛ no sɔ PVC core, Overlay film , tintim ne lamination nhyehyɛe a edi mũ no hwɛ.
Wobetumi de dade mprɛte a ɛne no hyia adi dwuma ne PETG kaad nhyehyɛe, nanso PETG dwumadie tebea betumi ayɛ soronko wɔ PVC ho. Si lamination recipe a edi mũ no so dua ansa na wɔayɛ no kɛse.
PC yɛ kaad nneɛma a ɛne no hyia ma saa adeɛ yi no mu baako. Esiane sɛ polycarbonate card a wɔyɛ no betumi ayɛ ɔhyew ne nhyɛso tebea horow a ɛyɛ den nti, ɛsɛ sɛ wogye dade mprɛte nkyerɛkyerɛmu a wɔapaw no tom de gyina PC lamination nhyehyɛe ankasa no so.
Yiw, wobetumi de lamination mprɛte a ɛfata adi dwuma wɔ RFID prelam ne smart-card a wɔyɛ mu. Ɛsɛ sɛ wɔpaw stack pressure, cushion pads ne inlay construction de bɔ antennas ne embedded components ho ban.
Mirror glossy, matte ne customized patterned mprɛte options wɔ hɔ. Ɛsɛ sɛ wɔde silk, frosted anaa texture ahwehwɛde afoforo ka ho de reference sample kɔ ma wɔde si so dua sɛ ɛbɛyɛ yiye.
Dade mprɛte biako biara nni hɔ a ebetumi ahyɛ eyi ho bɔ. Mprɛte a ɛyɛ tratraa a ɛho tew boa lamination a ɛkɔ so daa, nanso bubbles ne delamination nso betumi afi Overlay film coating, ink compatibility, nsuo, ɔhyew, nhyɛso, tra bere ne onwini tebea mu aba.
Finished-card thickness yɛ titiriw na ɛkyerɛ ne nyinaa card nneɛma nhyehyɛe ne lamination nhyehyɛe. Plate thickness yɛ afiri ne press-stack parameter sen sɛ ɛbɛyɛ ade titiriw a ɛkyerɛ card gauge a wɔawie.
Ɔsom nkwa nna gu ahorow sɛnea adwumayɛ tebea, nea wɔhwehwɛ wɔ soro, ahotew, nneɛma a wɔkora so ne sɛnea wodi ho dwuma te. Wɔayɛ mprɛte no sɛ wɔmfa nyɛ nneɛma mpɛn pii a wɔadi ho dwuma yiye na wɔasiesie no yiye. Ɛsɛ sɛ wɔka kyinhyia-nkwa nna ho bɔhyɛ a wɔahyɛ da ahyɛ no agyirae bere a wɔde afiri no ho nkyerɛkyerɛmu a ɛfa ho no foa so nkutoo.
Fa ɔkwan a wɔfa so siesie nneɛma a ɛne dade a ɛnyɛ den ne matte a ɛwɔ soro no hyia di dwuma. Kwati abrasive polishing a ebetumi asesa sɛnea wɔahyɛ so no daa. Yi efĩ fi hɔ ansa na prɛte no asan ayɛ adwuma.
Sɛ agyiraehyɛde koro no ara pue mpɛn pii wɔ beae koro no ara a, hwɛ sɛ dade mprɛte no ayɛ mmerɛw, ayɛ mmerɛw, efĩ anaasɛ nneɛma nketenkete bi ahyɛ mu anaa. Afei nso hwɛ Overlay film s, kaad nkrataa, cushion pads ne laminator contact surfaces.
Aane. Wobetumi de mprɛte a wɔde yɛ nhwɛso ama ma wɔasɔ ahwɛ, na ɛka a wɔbɔ wɔ nneɛma a wɔde mena ho no gyina nhyehyɛe a wɔapene so no so.
MOQ a wɔtaa yɛ no yɛ 100 asinasin. Wobetumi aka sɔhwɛ ahwehwɛde ahorow ho asɛm ama adetɔfo foforo, na ɛsɛ sɛ wɔsan si MOQ so dua ma nhwɛso soronko anaa amanne kwan so nsusuwii.
Typical production lead time yɛ bɛyɛ nnafua 7-15 a egyina order volume ne customization so. Ɛsɛ sɛ wɔsi bere a etwa to no so dua bere a wɔapene mprɛte kɛse, ne soro, ne kɛse ne ne dodow so akyi.
Fa prɛte tenten ne ne tɛtrɛtɛ a wɔhwehwɛ, ne kɛse, matte anaa texture reference, laminator model, card material, adwumayɛ hyew, dodow, ano ahwehwɛde, ahobammɔ-film ahwehwɛde ne delivery destination ma.
Worehwehwɛ matte card lamination dade mprɛte yɛfo a wotumi de ho to no so ma PVC , PETG , PC anaa RFID smart-card a wɔyɛ? Send Wallis wo mprɛte nsusuwii, thickness, surface ahwehwɛde, laminator model, card nneɛma ne order dodow ma mfiridwuma mu nhwehwɛmu, nhwɛsode nhwehwɛmu ne adwumayɛbea bo.
