|
PVC EVOH LDPE
WALLIS
| Launi: | |
|---|---|
| Girma: | |
| fa'ida: | |
| Yawan: | |
Wallis yana ba da takardar PVC/EVOH/LDPE babban katanga mai kauri don magunguna, likitanci, bincike, kayan abinci mai gina jiki da aikace-aikacen fakitin kiwon lafiya na musamman. Tsarin multilayer ya haɗu da wani m PVC kafa Layer, wani EVOH oxygen-shama Layer da LDPE seal Layer don samar da ma'auni na thermoforming, gas kariya da zafi-hatimin ayyuka.
Ana iya ba da kayan a cikin nadi ko zanen gadon da aka riga aka yanke tare da ƙaƙƙarfan kauri, faɗi, launi, rashin ƙarfi da ginin Layer. Ana iya ƙididdige shi don ramukan thermoformed, trays masu tsauri, marufi na juzu'i, marufi na reagent da sauran tsarin marufi da aka canza.
Don aikace-aikacen magunguna da na likitanci, zaɓin kayan ƙarshe ya kamata ya dogara da ƙimar isar da iskar oxygen da ake buƙata, ƙimar watsa ruwa-ruwa, zurfin kafawa, tsarin rufewa, ƙirar ƙira, tsarin haifuwa da buƙatun kayyade-kasuwa. Ana ba da shawarar cancantar jiki na cikakken kunshin kafin samar da kasuwanci.
Tsarin marufi na multilayer ya haɗu da polymers daban-daban saboda babu wani abu guda ɗaya da ke ba da ingantaccen ƙarfi, shingen iskar oxygen, kariyar danshi, hatimi da sarrafa aiki ga kowane aikace-aikacen.
PVC yana samar da tushe na farko mai tsauri ko tsayayyen tsari. Yana ba da kwanciyar hankali mai girma kuma yana goyan bayan dumama, samuwar rami, yankan da sauran hanyoyin jujjuya marufi.
An zaɓi EVOH da farko don ƙarancin iskar oxygen da iskar gas. Haɗa ƙaramin shingen shinge na EVOH na ɗan ƙaramin bakin ciki na iya haɓaka aikin shingen iskar oxygen na fakitin multilayer idan aka kwatanta da polymers na kayayyaki na yau da kullun.
Ayyukan shinge na EVOH yana shafar yanayin zafi, don haka Layer EVOH yawanci ana kiyaye shi a cikin tsarin multilayer maimakon a yi amfani da shi azaman shimfidar shinge mai shinge mai fallasa.
LDPE na iya aiki azaman shingen rufewa kuma zai iya taimakawa kare shingen EVOH daga bayyanar danshi. Ayyukan shamaki-danshi na ƙarshe ya dogara da kauri na LDPE, cikakken tsarin laminate da yanayin muhalli da ake amfani da su don gwaji.
Ƙimar masu zuwa suna wakiltar kewayon samfurin Wallis na yau da kullun. Haƙuri na ƙarshe, ƙimar Layer da aikin aiki yakamata a tabbatar da su don kowane aikin marufi na likita ko magunguna.
| Siga Na | Musamman Musamman / Bayanan kula |
|---|---|
| Samfura | PVC/EVOH/LDPE Babban Shamaki Rigid Packaging Sheet |
| Tsarin | PVC tsarin Layer / EVOH oxygen-barrier Layer / LDPE sealing Layer |
| Jimlar Kauri | Kusan 0.055-2.00 mm; musamman bisa ga aikace-aikace |
| Layer Ratio | Musamman bisa ga manufa OTR, WVTR, rigidity, kafa zurfin da buƙatun hatimi |
| Nisa | Kimanin 50-1400 mm |
| Tsarin Kaya | Rolls ko pre-yanke zanen gado |
| Yawan yawa | Kimanin 1.3-1.5 g/cm³, ƙarƙashin tsari na ƙarshe |
| Launi | M, fari, rawaya, m orange da musamman launuka |
| Oxygen Barrier | Babban aikin shinge na oxygen wanda EVOH ke bayarwa; saka OTR manufa da yanayin gwaji |
| Katangar danshi | Ya dogara da LDPE, jimlar tsarin multilayer, kauri da yanayin gwaji; saka WVTR manufa |
| Zafi-Sealing Layer | LDPE; dole ne a tabbatar da dacewa da abin rufe fuska |
| Gudanarwa | Thermoforming, yankan, hatimi, bugu da ƙayyadaddun juyawa na aikin |
| Keɓancewa | Kauri, Layer rabo, nisa, size sheet, launi, opacity, saman da kuma yi sanyi |
PVC/EVOH/LDPE Composite Rigid Sheet
PVC/EVOH/LDPE Packaging Pharmaceutical
Katangar iskar oxygen da shingen danshi sune kaddarorin marufi daban-daban kuma yakamata a fayyace su daban. Wani abu da aka siffanta shi da 'babban shinge' baya samar da isassun bayanan fasaha don zaɓin marufin magunguna.
Ana amfani da EVOH da farko saboda kyakkyawan juriya ga iskar oxygen da sauran watsa iskar gas. Wannan na iya zama mai ƙima ga samfuran da ke da alaƙa da lalata oxidative.
EVOH kanta tana kula da danshi. LDPE da sauran yadudduka na polymer da ke kewaye suna taimakawa keɓe EVOH daga ruwa kuma suna ba da gudummawa ga jimlar aikin shinge-danshi na laminate da aka gama.
Sosai hygroscopic pharmaceutical kayayyakin iya bukatar karfi da ruwa- tururi kariya fiye da daidaitaccen tsarin PVC/EVOH/LDPE zai iya samarwa. Dangane da bayanan kwanciyar hankali, ana iya buƙatar kimanta PVDC-, PCTFE- ko wasu ƙaƙƙarfan ginin shinge-danshi na musamman.
OTR yana auna iskar oxygen ta hanyar tsarin marufi a ƙarƙashin ƙayyadaddun yanayi. Ya kamata masu siye su samar da ƙimar manufa tare da zafin gwaji, yanayin zafi, yankin gwaji da kuma hanyar da ta dace.
WVTR yana auna watsa tururin ruwa kuma yakamata a ƙayyade shi ba tare da OTR ba. WVTR da ake buƙata ya dogara da ƙwarewar danshin samfur da yanayin ajiya da ake tsammani.
Ƙimar OTR da WVTR na iya canzawa sosai tare da zafin jiki, zafi da kauri. Don haka ya kamata a kwatanta ƙimar mai bayarwa kawai lokacin da yanayin gwajin yayi daidai.
Thermoforming yana shimfiɗa kayan multilayer kuma yana rage kauri a bangon rami da sasanninta. Don aikace-aikace masu mahimmanci, yakamata a kimanta aikin shinge akan fakitin da aka kafa da kuma kan takardar fakiti na asali.
Layin EVOH yana rage yawan iskar oxygen idan aka kwatanta da sifofin polymer kayayyaki na yau da kullun kuma yana iya tallafawa haɓaka marufi don samfuran iskar oxygen.
PVC yana ba da ingantaccen tushe na tsari don thermoforming, yana taimakawa ƙirƙirar ƙaƙƙarfan cavities, trays da sauran abubuwan da aka canza marufi.
Layin LDPE yana ƙirƙirar shimfidar silinda mai aiki kuma ana iya daidaita shi zuwa madaidaicin sutura ko tsarin mating bayan gwajin hatimi.
Siffar fayyace na iya ba da ganuwa samfurin yayin da ke riƙe da Layer EVOH oxygen-shinge. Hakanan za'a iya tattauna nau'ikan launuka masu launi da shuɗi don ayyukan da ke buƙatar bayyanar gani na daban.
Za'a iya kimanta jimlar kauri da ma'auni na mutum ɗaya bisa ga taurin da ake buƙata, matakin shinge, joometry na rami, yanayin rufewa da tsarin juyawa.
Ayyukan hatimin zafi ya dogara da cikakken tsarin rufewa. LDPE na iya samar da ingantacciyar madauri mai ƙarfi, amma ƙarfin hatimi ba za a iya annabta daga sunan polymer kaɗai ba.
Masu siye ya kamata su samar da madaidaicin murfin aluminum, fim ɗin da aka lakafta, rufin peelable ko sauran tsarin mating saboda daban-daban sealants da sutura suna buƙatar yanayi daban-daban.
Ya kamata a kafa zazzabi na farawa hatimi, lokacin zama, matsa lamba da saurin layi ta amfani da ainihin injin marufi da kayan rufewa.
Ya kamata a duba fakitin da aka gama don ƙarfin hatimi, tashoshi, yoyo da mutunci a ƙarƙashin yanayin sufuri da ake tsammani.
Za a iya haɓaka PVC / EVOH / LDPE don marufi na thermoformed, amma ya kamata a kimanta cikakken tsarin Layer a ƙarƙashin yanayin ƙirƙirar da aka yi niyya.
Dole ne yanayin zafi ya ƙyale isassun samar da PVC yayin da ake guje wa lalacewa ta hanyar laminate ko juzu'i mai yawa na ɓangaren da aka gama.
Zurfafan cavities suna haifar da miƙewa abu mafi girma. Bayar da faɗin rami, tsayi, zurfin da lissafi na kusurwa lokacin kimanta sabon ƙayyadaddun ƙayyadaddun abubuwa masu yawa.
Ya kamata a kimanta mahimman samfuran iskar oxygen ta amfani da gwajin shingen fakiti saboda kauri na EVOH na iya bambanta a ko'ina cikin rami bayan miƙewa.
Ya kamata a bincika laminate bayan ƙirƙirar don rabuwar interlayer, farar fata, fatattaka ko wasu canje-canjen tsarin kafin amincewar kasuwanci.
Ana iya kimanta PVC/EVOH/LDPE don allunan, capsules da sauran samfurori masu ƙarfi inda kariyar oxygen, haɓaka hali da amincin hatimi suke da mahimmanci. Yakamata a kimanta samfuran da ke da ɗanɗano sosai daban-daban da ƙaƙƙarfan tsarin shingen danshi.
Abubuwan da aka gano da kuma abubuwan gwaji na iya fa'ida daga marufi na shinge na oxygen, amma yakamata a tabbatar da dacewa tare da ainihin ƙirar reagent, Layer lamba da yanayin ajiya da aka yi niyya.
Za a iya ƙididdige aikace-aikacen marufi na ruwa ko raka'a a inda LDPE Layer lamba, ƙirar hatimi da daidaituwar sinadarai suka dace da ƙirar.
Za a iya ƙididdige tsayayyen tsarin multilayer don magunguna ko tiren kiwon lafiya waɗanda ke buƙatar thermoforming da aikin shinge-oxygen. Bakararre marufi-na'urar likitanci na buƙatar cancanta daban na cikakken kunshin da tsarin haifuwa.
Bitamin da ke da iskar oxygen, kari da tsarin abinci mai gina jiki na iya zama 'yan takara don marufi na tushen EVOH lokacin da cikakkiyar ƙayyadaddun shamaki ya dace da buƙatun-kwanciyar samfur.
PVC/EVOH/LDPE Packaging Pharmaceutical
PVC/EVOH/LDPE Packaging Medical
Matsakaicin Maganin Magunguna & Ruwa
Kunshin Capsule
| Tsarin | Babban Shamaki Mayar da Hankali | Na Musamman Zaɓin Dabaru |
|---|---|---|
| PVC/PE | Samar da + rufewa | Yi amfani lokacin da daidaitattun matakan shinge suka isa |
| PVC / EVOH / LDPE | Ingantaccen shingen iskar oxygen / iskar gas + rufewa | Yi ƙima don samfuran iskar oxygen waɗanda ke buƙatar fakitin thermoformable bayyananne |
| PVC/PVDC | Inganta danshi da shingen oxygen | Zaɓin gama gari inda ake buƙatar kariya mai ƙarfi |
| PVC / PE / PVDC | Rufewa da ingantaccen shamaki / iskar gas | Yi kimanta bisa ga ƙirƙira, hatimi da buƙatun shinge |
| Tsarin tushen PCTFE | Babban shamaki mai yawa | Yi la'akari da samfura masu tsananin danshi dangane da bayanan kwanciyar hankali |
Ba za a siffanta takardar marufi da yawa a matsayin mai dacewa da duniya baki ɗaya tare da duk magunguna, kaushi, mai, reagents na bincike ko tsarin ilimin halitta. Daidaituwa ya dogara da ainihin ma'aunin lamba da samfur ɗin da aka haɗa.
Inda LDPE ita ce saman tuntuɓar samfurin, ainihin makin sa, abubuwan da ake ƙarawa da kuma dacewa ya kamata a kimanta su bisa ga kunshin tsari.
Liquids, reagents, mai da abubuwan da ke ƙunshe da kaushi yakamata a gwada don kumburi, fashewar damuwa, hakar, ƙaura, canza launin da canje-canje a hatimi ko aikin shinge.
Marufi mai girma na iya ba da gudummawa ga kariyar samfur, amma kayan marufi da kanta ba zai iya ba da garantin takamaiman rayuwar shiryayye na magunguna ba. Ya kamata a kafa rayuwar shiryayye ta ƙarshe ta tsarin kwanciyar hankali na masana'anta.
Dacewar haifuwa ya dogara da ainihin aikin PVC/EVOH/LDPE da fasahar haifuwa. Kada ka ɗauka tsarin ɗaya ya dace ta atomatik tare da tururi, bushewar zafi, ethylene oxide, radiation gamma, igiyar lantarki ko wasu matakai.
Masu saye ya kamata su samar da zafin jiki na haifuwa, matsa lamba, adadin radiation, lokacin bayyanarwa da adadin hawan keke a inda ya dace. Ya kamata a duba kunshin da aka gama don nakasawa, canza launin, lalata, canjin hatimi da riƙe shinge.
Cancantar marufi na likitanci da magunguna yakamata su dogara ne akan takaddun ainihin ƙimar kayan da aka saya. Bayanin gabaɗaya kamar 'jinin likitanci' ko 'majin magunguna' baya maye gurbin takamaiman ƙa'idodin ƙa'idar aiki.
Ya kamata masu siye su nemi ƙayyadaddun fasaha wanda ke rufe ainihin tsari, kauri, haƙuri, faɗi da kaddarorin ayyuka masu dacewa.
Inda tsarin ingancin abokin ciniki ya buƙaci, ainihin tsarin samarwa yakamata a goyi bayan COA da aka amince maimakon dogaro da takaddun shaida daga tsarin kayan daban.
Shafin Wallis na yanzu ya haɗa da PVC masu zuwa da takaddun tunani na PVDC. Saboda wannan samfurin shine PVC/EVOH/LDPE maimakon PVC/PVDC, masu siye yakamata su nemi takaddun da suka dace da ainihin ƙimar PVC/EVOH/LDPE waɗanda suka cancanta.
Tabbatar da aikin shinge-oxygen a ƙarƙashin yanayin gwajin da ya dace da ƙãre samfurin da yanayin ajiya.
Auna watsa tururin ruwa da kansa inda tsarin magunguna ke da ɗanɗano.
Ƙimar samuwar rami, rarraba kauri, farar fata, fatattaka da kwanciyar hankali a kan kayan aikin ƙirƙira da aka yi niyya.
Gwada madaidaicin saman LDPE tare da abin da aka yi niyya don kafa taga mai rufewa mai amfani.
Dole ne a gwada aikace-aikacen tuntuɓar kai tsaye ta amfani da ainihin tsarin magunguna, bincike ko tsarin kiwon lafiya.
Cancantar marufi yakamata ya haɗa da ajiyar wakilci, sufuri da yanayin kwanciyar hankali kafin a amince da kayan don amfanin kasuwanci.
Za'a iya tattauna jimlar kauri a cikin kewayon samarwa bisa ga taurin kai, juzu'i na cavity da ginin marufi na ƙarshe.
Ya kamata a tsara Layer EVOH bisa ga maƙasudin shingen iskar oxygen da ake buƙata maimakon zaɓar ma'aunin kauri na sabani.
LDPE kauri da sa za a iya kimanta bisa ga kayan rufewa, hanyar rufewa da buƙatun abokin ciniki.
Faɗin mirgine da girman da aka riga aka yanke za a iya daidaita su zuwa thermoforming, rufewa da canza kayan aiki a cikin kewayon samarwa.
M, fari, rawaya, m orange da musamman launuka za a iya tattauna. Ya kamata a fayyace buƙatun kariyar haske daban inda ingancin hoto na magunguna ke da mahimmanci.
Gano ko fakitin ya ƙunshi allunan, capsules, foda, reagents bincike, ruwaye, kayan aikin likita ko wani samfur.
Samar da buƙatun Layer na PVC/EVOH/LDPE ko TDS na yanzu idan maye gurbin wani abu mai wanzuwa.
Ƙayyade maƙasudin jimlar kauri da buƙatun ƙirar kowane mutum idan an riga an kafa su.
Samar da adadin isar da iskar oxygen da ake buƙata tare da zafin jiki, yanayin zafi da hanyar gwaji.
Bayar da ƙimar watsawar tururin ruwa da ake buƙata da yanayin gwaji masu dacewa inda kariyar danshi ke da mahimmanci.
Ƙayyade faɗin yi, girman takardar, girman ainihin da matsakaicin girman nadi bisa ga kayan aikin juyawa.
Haɗa ƙirar ƙirar inji, girman rami, zurfin zana da kewayon zafin da ake da shi a inda akwai.
Gano kayan mating tare da zafin hatimi, matsa lamba, lokacin zama da saurin samarwa.
Idan an buƙata, samar da hanyar haifuwa, zafin jiki ko adadin radiation, lokacin bayyanarwa da buƙatun sake zagayowar.
Samar da ƙasar da aka nufa da madaidaitan magunguna, na'urar likitanci, abokan hulɗar samfur ko takamaiman takaddun buƙatun abokin ciniki.
Haɗa yawan samfurin, ƙimar cancanta, odar farko mai yawa da ƙarar siyayyar shekara-shekara idan akwai.
Layin Samar da Marufi na Material
Haɗin gwiwar Abokin Ciniki
Hadin gwiwar B2B na Duniya
Nunin Marufi
Nunin Marufi na Magunguna
Yana da tsarin marufi mai mahimmanci ko tsaka-tsakin marufi yana haɗa PVC don tallafi na tsari da thermoforming, EVOH don shingen iskar oxygen da gas, da LDPE don rufewa da kariyar danshi.
Ana amfani da EVOH da farko don rage iskar oxygen da iskar gas. Yana da amfani musamman lokacin da aka ƙunshe samfurin yana kula da lalatawar iskar oxygen.
EVOH galibi shine shingen iskar oxygen da iskar gas kuma yana kula da danshi. LDPE da ke kewaye da sauran yadudduka na polymer suna kare EVOH kuma suna ba da gudummawa ga cikakken aikin danshi. Samfuran da ke da ɗanɗano sosai na iya buƙatar wani keɓaɓɓen tsarin shinge mai ƙaƙƙarfan danshi.
Kewayon samfurin Wallis na yanzu ya lissafa kusan 0.055-2.00 mm jimlar kauri. Ya kamata a tabbatar da ma'aunin Layer na ƙarshe da haƙurin kauri bisa ga shingen da ake buƙata, ƙirƙira da aikin rufewa.
Kewayon samfurin na yanzu yana lissafin faɗin faɗin kusan 50-1400 mm, tare da nadi da zanen gado da aka riga aka yanke bisa ga aikin.
Zaɓuɓɓukan na yanzu sun haɗa da m, fari, rawaya da lemu mai fa'ida, tare da ƙarin launuka na al'ada da matakan rashin ƙarfi dangane da buƙatun aikin.
Za a iya samar da ingantattun sifofi masu dacewa zuwa cikin kogo ko trays. Samar da zafin jiki, zurfin rami, rabon zane da riƙe shinge ya kamata a inganta ta amfani da ainihin kayan aikin samarwa.
Ana iya ƙididdige aikace-aikacen zane mai zurfi, amma zurfin ƙirƙira mafi girma yana haifar da ƙarin shimfiɗa kayan. Kwanciyar hankali, kaurin bango da kafaffen shingen fakiti ya kamata a bincika kafin amincewa.
Daidaituwar hatimi ya dogara da darajar LDPE da murfin hatimin zafi na foil na aluminum. Yakamata a gwada ainihin kafawar gidan yanar gizo da bangon murfi tare don kafa madaidaicin tagan hatimi.
Madaidaicin OTR ya dogara da fakitin samfuran iskar oxygen da rayuwar shiryayye da ake buƙata. Bayar da ƙimar manufa tare da zafin jiki, yanayin zafi da kuma hanyar gwajin da aka yi niyya.
WVTR da ake buƙata ya dogara da ɗanɗanon samfurin da yanayin ajiya. Samfuran hygroscopic sosai na iya buƙatar tsari na musamman wanda aka inganta don ƙaƙƙarfan kariyar tururin ruwa.
PVC/EVOH/LDPE yana ba da fifiko mai ƙarfi akan shingen iskar oxygen na EVOH da aka haɗa tare da rufewar LDPE. Ana zaɓi tsarin PVC/PVDC galibi lokacin da shamakin danshi da iskar gas ke buƙatar ƙarawa. Ya kamata a zaɓi tsarin da ya dace daga ainihin kwanciyar hankali da buƙatun shinge.
Ya dogara da WVTR da ake buƙata da ƙirar fakitin duka. Don magungunan da ke da ɗanɗano sosai, PVDC-, PCTFE- ko wani tsarin ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan tsari na iya buƙatar kimantawa.
Ba za a iya ɗaukan dacewa ga kowane tsari ba. Dole ne a gwada aikace-aikacen tuntuɓar kai tsaye ta amfani da ainihin ruwa ko reagent tare da zaɓaɓɓen Layer lamba LDPE.
Daidaitawar haifuwa ya dogara da ainihin aikin gini na multilayer da tsarin haifuwa. Samar da hanyar, zafin jiki, kashi ko matsa lamba da yanayin sake zagayowar don a iya kimanta aikin kunshin.
Babu sunan abu na gabaɗaya da ke bada garantin amincewar tsari ga kowane aikace-aikace. Cancanci ya dogara da ainihin ma'auni, yanayin hulɗar samfur, nau'in sashi, kasuwar makoma da ƙa'idodi masu dacewa ko buƙatun abokin ciniki.
Ee. Ana ba da shawarar kimanta samfurin don OTR, WVTR, thermoforming, rufewar zafi, dacewa samfurin, kauri, launi da gwajin-layi kafin amincewar kasuwanci.
Da fatan za a samar da samfur ɗin da aka ƙunshe, tsarin da ake buƙata, jimlar kauri, OTR manufa da WVTR, mirgine ko takarda, yanayin ƙirƙira, kayan rufewa, yanayin rufewa, buƙatun haifuwa, buƙatun tsari da ƙimanta adadin siye.
Aika Wallis tsarin da ake buƙata, kauri, faɗi, maƙasudin OTR/WVTR, girman rami, tsarin rufewa, buƙatun abokin ciniki da ƙimanta adadin siye. Za mu iya tattauna musamman PVC / EVOH / LDPE m zanen gado don Pharmaceutical, bincike da kuma likita marufi ayyukan.
Idan kuna maye gurbin wani babban abin shamaki, samar da TDS na yanzu, fakitin da aka kafa ko samfurin tunani don haka za a iya kimanta shinge, thermoforming da buƙatun rufewa kafin samarwa kasuwanci.
