|
kaɖi dzi nyatakakawo
Wallis ye nye esia
| Amadede: | |
|---|---|
| Nusi wotsɔ wɔe: | |
| Titrime : | |
| dɔwɔwɔ: | |
| Agbɔsɔsɔ: | |
Wallis card lamination cushion pads nye nyadzɔdzɔŋlɔlawo ƒe nuzazã siwo woate ŋu azã ake siwo wozãna le dɔwɔƒewo ƒe plastic card laminators me be woakpe ɖe wo ŋu woaxe fe ɖe tɔtrɔ suesuesue siwo le woƒe titrime ta eye woama nyaƒoɖeamenu sɔsɔe wu le lamination cassette la me. Woateŋu atrɔ asi le silicone, fiberglass-do ŋusẽ xɔtuɖoɖo siwo li kple esiwo do ƒome kplii ŋu na PVC , PETG , PC , RFID inlay, ID card kple smart card wɔwɔ.
Le B2B kaɖi wɔlawo gome la, ele be woatu pad tiatia ɖe laminator, gakpo gbadzɛ ƒe didime, kaɖi ƒe nu, stack xɔtutu, dzoxɔxɔ ƒe ʋuʋudedi, nyaƒoɖeamenu, tsatsam ƒe ɣeyiɣi kple anyigba ƒe nuwuwu si hiã dzi. Press pad si sɔ ate ŋu ado alɔ kadodo kple gbadzaƒe si woate ŋu agbugbɔ awɔ, gake mexɔ ɖe ink ƒuƒu nyuie, tsidzadza dzi ɖuɖu, agbalẽviwo dzi kpɔkpɔ alo lamination ƒe nuɖaɖa si dzi woda asi ɖo teƒe o.
Asixɔxɔ siwo gbɔna ɖea nusi wowɔ ƒe axa ƒe nufiame ƒe didime si li fifia fiana. Ele be woaɖo kpe nu mamlɛtɔ tutu, dɔwɔwɔ ƒe dzoxɔxɔ si yia edzi, sesẽme, didime ƒe mɔɖeɖe ɖe nu ŋu kple subɔsubɔ ƒe nɔnɔmewo dzi le nyayɔyɔ, mɔ̃ɖaŋu ŋuti nyatakaka gbalẽvi kple kpɔɖeŋu si dzi woda asi ɖo me.
| Parameter | Reference Specification / B2B ƒe Kpeɖodzi |
|---|---|
| Nu si wowɔ | Kpekpeɖeŋugbalẽvi lamination cushion pad / kaɖi ƒe nyadzɔdzɔgblɔmɔ̃ |
| Nufiame Xɔtuɖoɖo | Silicone si te ŋu nɔa te ɖe dzoxɔxɔ nu eye wotsɔa fiberglass doa ŋusẽe; cushion xɔtutu bubu siwo ŋu woate ŋu alé ŋku ɖo le dɔa me |
| Nufiame ƒe Titrime | 1.5–3.5mm ƒe didime; tia le kasɛt ƒe dometsotso, nyaƒoɖeamenu ƒe fexexe kple dzoxɔxɔ-tsɔtsɔ ƒe taɖodzinu nu |
| Nufiame Dɔwɔwɔ ƒe Dzoxɔxɔ | 120–180°C na nusiwo wowɔ fifia; ɖo kpe dzoxɔxɔ si yia edzi kple esi de ŋgɔ wu dzi na klass si nètia |
| Ŋkume | Eʋẽna alo matte; ɖo kpe akpa si dze ŋgɔ agbaa dzi kple nenye be ehiã be woawɔ atike na amewo be woaɖe asi le eŋu |
| Amadede | White, grey alo dɔa koŋ ƒe tiatia |
| Sesẽme / Cushioning | Wowɔe ɖe ɖoɖo nu; gblɔ Shore hardness alo compression-recovery reference si dzi woda asi ɖo le afisi wòsɔ le |
| Lolome | A4, A3, press-plate lolome alo custom lãɖeɖe si wotu ɖe asisiwo ƒe nɔnɔmetata dzi |
| Dɔbiagbalẽviwo | PVC , PETG , PC , ABS , RFID inlay, contactless, ID, hamevinyenye kple kaɖi ƒe xɔtuɖoɖo bubu siwo wotsɔ laminated |
| Woate ŋu azãe ake | Woate ŋu azãe ake le nɔnɔme siwo dzi woda asi ɖo me; dometsotso si woatsɔ aɖɔli wo nɔ te ɖe dzoxɔxɔ, nyaƒoɖeamenu, ɖiƒoƒo, nudzraɖoƒe kple tsatsam ƒe xexlẽme dzi |
| Nudɔdɔ ƒe Nudidi | MOQ, packing kple lead time nɔ te ɖe dimensions, xɔtutu kple customization dzi |
Card lamination cushion pad nye nusi te ŋu nɔa te ɖe dzoxɔxɔ nu, si woate ŋu aƒo, si woda ɖe lamination cassette alo press stack me le mɔ̃a ƒe nɔnɔme nu. Zi geɖe la, ewɔa dɔ ɖekae kple dzoxɔxɔnamɔ̃wo, gakpo siwo wotsɔ blɔ alo matte, asiɖeɖe le nu ŋu ƒe ƒuƒoƒo kple agbalẽvi si dzi woŋlɔa nu ɖo. Eƒe dɔe nye be wòawɔ ɖe tɔtrɔ suesuesue siwo le ƒuƒoƒoa me dzi eye wòakpe ɖe ame ŋu wòatsɔ nyaƒoɖeamenu kple dzoxɔxɔ ayi teƒe bubu ɣesiaɣi wu.
Ele be teƒe si tututu woaɖoe ɖo la nawɔ ɖe laminator kple kasɛt ƒe mɔfiamewo dzi. Zi geɖe la, wotsɔa agbalẽtamɔ̃ ɖoa kaɖigbalẽa kple gakpo siwo wotsɔ wu enu ƒe agbawo godo tsɔ wu be woazãe abe nusi ŋu womeɖo kpee o si woate ŋu aƒo ka na ame tẽ le Overlay film s siwo wota dzi.
Cushioning layer si dzi wokpɔna ate ŋu axe fe ɖe plate, stack kple sheet ƒe tɔtrɔ suesuesuewo ta. Esia kpena ɖe ame ŋu be woaɖe nutoa me ƒe nyaƒoɖeamenu gã kple nyaƒoɖeamenu sue ƒe teƒe siwo ate ŋu ana kadodo si mesɔ o, nugbɔ ƒe gbɔdzɔgbɔdzɔ alo agbalẽvi ƒe dzesiwo naɖe akpɔtɔ.
Pad ƒe titrime kple ewɔwɔ kpɔa ŋusẽ ɖe alesi dzoxɔxɔ ɖoa kaɖia ƒe ƒuƒoƒoa gbɔ kabakaba kple alesi stack la fae dzi. Xɔ si le tsɛ wu alo esi te ŋu zɔa mɔ wu ate ŋu ado alɔ tsatsam kpuiwo, gake xɔ si le kpekpem wu, si fa wu ate ŋu ana woaxe fe geɖe wu. Ele be woada asɔ nyuie to nyadzɔdzɔŋlɔlawo ƒe dodokpɔwo me tsɔ wu be woato eƒe titrime ɖeɖeko dzi.
Cushion pad le eɖokui si mate ŋu aka ɖe agbalẽvi siwo me bubble mele o alo esiwo me warp mele o dzi o. Ele be woakpɔ tsidzadza, solvent ƒe léle ɖe te, ink film ƒe titrime, Overlay film chemistry, ya si xaxa, platen parallelism, dzoxɔxɔ ƒe ɖekawɔwɔ, nyaƒoɖeamenu, fafa kple ɣeyiɣi si me woɖea asi le eŋu hã dzi.
| Pad Category | Typical Tiatia Logic | Points be woaɖo kpe edzi |
|---|---|---|
| Silicone + Fiberglass ƒe Nudzraɖoƒe | General card lamination afisi cushioning si li ke, dzadzɛnyenye kple dɔwɔwɔ si woate ŋu azã ake hiã | Titrime, sesẽme, dzoxɔxɔ, anyigba ƒe tack, fiberglass ƒe ɖeɖefia kple compression gbugbɔgaxɔ |
| Wool / Felt + Silicone Pad ƒe lãfu | Dɔwɔwɔ siwo hiã buffer si fa wu alo dzoxɔxɔ ƒe nuwɔna vovovo | Tsidzadza dzi ɖuɖu, lint dzidzi, anyigba ƒe nɔnɔme, titrime ƒe bu kple dzadzɛnyenye mɔnu |
| Tsã Fast-Cycle Pad si le tsɛ | Nyadzɔdzɔŋlɔlawo ƒe tsatsam kpui siwo me dzoxɔxɔ ƒe tsɔtsɔ kabakaba le vevie wu fexexe gã | Kasɛt ƒe gbadzaƒe, platen ƒe ɖekawɔwɔ, card-stack ƒe tɔtrɔ kple peak pressure |
| Dzoxɔxɔ Kɔkɔe Multilayer Pad | Dzoxɔxɔ si lolo wu alo esi bia be woagawɔ tsatsam enuenu ne woda asi ɖe xɔtutu aɖe si woɖo ɖi dzi | Madzudzɔmadzudzɔe tsɔtsɔ sɔ kple kɔkɔƒe ƒe dzidzedzekpɔkpɔ, gotagome-ƒuƒoƒo ƒe blibonyenye, ɖiƒoƒo dzi ɖuɖu kple asiɖeɖe le eŋu ƒe nuwɔna |
Na dzoxɔxɔnamɔ̃ alo kasɛt ƒe didime, nyatamɔ̃ si woate ŋu azã, do siwo woatsɔ aɖoe, dzogoe ƒe didime kple teƒe si hiã. Pad siwo lolo akpa ate ŋu avuvu alo ado kplamatse agbatsɔtsɔ, gake pad siwo lolo akpa ate ŋu ana nyaƒoɖeamenu ƒe madzudzɔmadzudzɔe le goawo gbɔ.
Titrime ɖɔa ŋutilã ƒe xɔtutu, gake sesẽme kple nutete ƒe nuwɔnae afia alesi pad la wɔa nui le agba te. Pad si le kpekpem wu la menyona le eɖokui si o. Nutete si gbɔ eme ate ŋu atrɔ dzoxɔxɔ ƒe tsɔtsɔ, stack ƒe kɔkɔme kple kaɖi mamlɛtɔ ƒe titrime, evɔ pad si sesẽ akpa ate ŋu ana fexexe si mesɔ gbɔ o.
Gblɔ dzoxɔxɔ do ŋgɔ, dzoxɔxɔ-tete, fafa kple asiɖeɖe le eŋu ƒe nɔnɔmewo, siwo dometɔ aɖewoe nye dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi kple tsatsam le tɔtrɔ ɖesiaɖe me. Ele be woade vovototo subɔsubɔ ƒe dzoxɔxɔ si yia edzi ɖaa kple dzoxɔxɔ ƒe kɔkɔƒe ƒe dzidzenu kpui aɖe gbɔ.
Ðiƒoƒo si mebɔ o le anyigba dzi le vevie elabena ke, silicone ƒe nugbagbevi siwo susɔ, ka siwo gblẽ alo nu suesuesue siwo wotsɔ de eme ate ŋu atsɔ nusiwo gblẽ la ade agbalẽviwo alo kaɖiwo me. Kpɔe ɖa be atike siwo wotsɔna klɔa nu ŋu kple nenye be agbalẽvi si nètia la hiã na mɔfiame tɔxɛ aɖe alo esi woaɖe asi le eŋu.
| Tiatia Nu | Silicone-Fiberglass Xɔtuɖaŋu | Alẽfu / Felt-Silicone Xɔtuɖaŋu |
|---|---|---|
| Nɔnɔme Gbãtɔ | Elastomeric pad si wodo ŋusẽe kple anyigba si dzi wokpɔna kple didime ƒe kpekpeɖeŋu | Buffer si wotsɔ avɔ wɔe si fa wu si wotsɔ ƒo ƒu kple elastomer si te ŋu nɔa te ɖe dzoxɔxɔ nu |
| Nyaƒoɖeamenu ƒe Fexexe | Enɔ te ɖe silicone ƒe wɔwɔme, ƒuƒoƒo ƒe xexlẽme, sesẽme kple titrime dzi | Ate ŋu ana ŋuɖoɖo si fa wu; ɖo kpe nutete si nɔa anyi ɖaa dzi le tsatsam enuenu megbe |
| Dzoxɔxɔ ƒe Ʋuʋu | Woate ŋu atiae be dzoxɔxɔ ƒe ŋuɖoɖo si da sɔ alo kabakaba wu | Ate ŋu axe mɔ ɖe dzoxɔxɔ nu geɖe wu le alesi wose le eɖokui me ƒe kpekpeme kple eƒe titrime nu |
| Dzadzɛnyenye | Kpɔe ɖa be ŋusẽdodo si woɖe ɖe go, anyigba ƒe gbegblẽ kple silicone ƒe asitɔtrɔ hã | Kpɔe ɖa be lint, tsi si woxɔ kple ɖiƒoƒo le anyigba dzi hã |
| Nuwɔna Nyuitɔ Kekeake | Du kaɖi ƒe ƒuƒoƒo ɖeka ma ke si dzi woda asi ɖo le candidate pads eveawo siaa dzi eye nàtsɔ dzoxɔxɔ ƒe ɣeyiɣi, gbadzaƒe, kadodo, agbalẽvi ƒe dzesiwo kple tsatsam ƒe liƒo asɔ kple wo nɔewo | |
Pad si wotia nyuie ate ŋu akpe ɖe agbalẽtamɔ̃a ŋu wòawɔ ŋusẽ ɖekae wu le agbalẽa ƒe akpa si woate ŋu azã la dzi, si ado alɔ ƒuƒoƒoa ƒe kadodo kple eƒe titrime si mewɔa tɔtrɔ o wu.
Layer si wɔ ɖeka ate ŋu aɖe asi sesẽ ƒe kadodo dzi akpɔtɔ eye wòakpe ɖe ame ŋu akpɔ gakpo siwo wotsɔ ƒo ƒui ta tso agba siwo le teƒe ɖeka me. Esia sɔ vevietɔ na RFID prelam agbalẽ siwo me chips, modules alo local thickness ƒe tɔtrɔ le, togbɔ be plate hardness kple stack design gakpɔtɔ le vevie hã.
Pad ƒe nɔnɔme si dzi wokpɔna kpena ɖe ame ŋu be woate ŋu agbugbɔ lamination ƒe nuɖaɖaa awɔ. Ele be tsikpe ƒe nuŋlɔɖiwo nanye pad ƒe dzesidede, ŋkeke si dzi wozãe zi gbãtɔ, keke ƒe xexlẽme, mɔfiame kple ŋkuléle ɖe eŋu ƒe nɔnɔme.
Kuɖɔ kple tsidzesiwo hã ate ŋu atso tsidzadza, ink ƒe dɔyɔyɔ si mede blibo o, dzoxɔxɔ ƒe dodo, dzoxɔxɔ ƒe agbɔsɔsɔ si mesɔ o, ya si mesɔ gbɔ o alo fafa ƒe dodo kaba gbɔ. Ele be kuxiwo gbɔ kpɔkpɔ nada alesi wowɔa dɔ bliboae.
Ðoɖo si wowɔ ɖe stack ŋu la toa vovo le agbalẽtamɔ̃ kple kaɖi ƒe wɔwɔme nu. Zã mɔ̃a ƒe mɔfiamegbalẽ kple dɔwɔwɔ ŋuti agbalẽvi si dzi woda asi ɖo. Dɔwɔwɔ ƒe ɖoɖo si gbɔna nye B2B ƒe kpeɖodzinana, ke menye xexeame katã ƒe stack nuɖaɖa o.
| Afɔɖeɖe ƒe Dzesidede | Afɔɖeɖe Ŋuti | Nuŋlɔɖi |
|---|---|---|
| 1. Dzidze nu | Kpɔ pad ƒe titrime le teƒe geɖe, plate flatness kple cassette clearance | Titrime ƒe anyigbatata kple dɔwɔnuwo ƒe ID |
| 2. Tu Stack | Load pad, steel plates, release layers kple card booklet le mɔ si dzi woda asi ɖo nu | Stack nutata kple layer mɔfiame |
| 3. Ʋɔnudrɔ̃ƒe ƒe Nyadzɔdzɔdɔwɔƒe | Zã taɖodzinu kaɖi ƒe nu, ink, Overlay film , RFID inlay kple ewɔwɔ ƒe didime | Dzoxɔxɔ, nyaƒoɖeamenu, nɔƒe kple fafa ƒe ʋuʋudedi |
| 4. Kpɔe ɖa | Kpɔ kadodo, gbadzaƒe, gloss/matte transfer, bubbles, tsidzesiwo, dents kple edge nɔnɔme ɖa | Defect map kple kpɔɖeŋu fotowo |
| 5. Da asi ɖe edzi | Do pad grade la eye nàwɔe ɖe Sika Kpɔɖeŋu aɖe ŋu | Nusiwo dzi woda asi ɖo kple tɔtrɔwo dzi kpɔkpɔ ŋuti nuŋlɔɖi |
Woateŋu ada pad la kpɔ na plastic cards siwo le ƒuƒoƒo geɖe me to core sheets siwo sɔ kple Overlay film s zazã me. Dzoxɔxɔ ƒe fesre to vovo le polymer ɖesiaɖe si, eyata mele be woasusui be pad kple press ƒe nuɖaɖa ɖeka sɔ na nu ɖesiaɖe o.
RFID agbalẽwo ateŋu anye teƒea ƒe titrime ƒe tɔtrɔ ƒo xlã chips, antenna joints alo modules. Ele be woaɖo kpe cushion tiatia dzi ɖekae kple gakpo-plate ƒe sesẽme, stack ƒe kɔkɔme kple RF dodokpɔ do ŋgɔ na lamination kple emegbe.
Le ɖoɖo siwo me atsyɔ̃ɖoɖo kple didime ƒe nudidi sesẽwo le gome la, ɖe seɖoƒe siwo dzi woaxɔ se na gbadzaƒe, titrime, lãgbalẽ ƒe ŋusẽ, anyigba ƒe nuwuwu kple kaɖi-ŋutilã ƒe gbɔdzɔgbɔdzɔwo. Gadzraɖoƒe alo dziɖuɖu ƒe dzidzenu ɖesiaɖe dzi wɔwɔ nɔ te ɖe kaɖi ƒe ɖoɖo bliboa dzi, ke menye cushion pad ɖeɖeko dzi o.
| Nya si Wode dzesii | si ate ŋu atso Pad gbɔ Dɔwɔwɔ | ƒe Dzodzro Bubuwo |
|---|---|---|
| Bonding si Mesɔ O / Edge Lift | Pad ƒe titrime ƒe tɔtrɔ, ɖoɖo si nɔa anyi ɖaa, pad si ƒe lolome mede o alo sesẽme si mesɔ o | Platen ƒe sɔsɔ kple wo nɔewo, nyaƒoɖeamenu, Overlay film atikeŋutinunya, nugbɔ ƒe ɖoɖowɔwɔ kple fafa |
| Bubbles / Tsidzesiwo | Pad si me dɔlékui le alo esi ŋu tsi gblẽ nu le; dzoxɔxɔ ƒe ŋuɖoɖo si mesɔ o | Ink ƒuƒu, nu ƒe tsidzadza, ya si xe mɔ na, dzoxɔxɔ ƒe agbɔsɔsɔ kple yaƒoƒo |
| Kpekpeɖeŋugbalẽvi Siwo Trɔna | Pad ƒe nutete si mesɔ o alo pad ƒe ɖoɖo si mesɔ o | Nuwo ƒe ɖeɖeɖa, ƒuƒoƒo siwo meda sɔ o, fafa ƒe nyaƒoɖeamenu kple dzoxɔxɔ si woɖena le eme |
| Plɛti Dzesiwo / Dents | Gbeɖuɖɔ siwo wotsɔ de eme, ka siwo woɖe ɖe go alo pad ƒe anyigba si gblẽ | Steel-plate ƒe gbegblẽ, RFID module ƒe kɔkɔme kple eŋudɔwɔwɔ ƒe dzadzɛnyenye |
| Dzoxɔxɔ-Dzidzedze Blewu | Pad si le kpekpem akpa alo si xea mɔ na dzoxɔxɔ akpa na taɖodzinu ƒe tsatsam | Dzoxɔxɔnamɔ̃ ƒe dodo, thermocouple ƒe nyateƒetoto, stack mass kple platen ƒe nɔnɔme |
| Nukutsetse Trɔna Le Ɣeyiɣi aɖe megbe | Compression set, hardening, cracks alo ɖiƒoƒo le tsatsam enuenu megbe | Nuɖaɖa ƒe ʋuʋu, raw-material batch ƒe tɔtrɔ kple dɔwɔnuwo ƒe dzidzedze |
Wallis ate ŋu ato pad ƒe didime siwo wowɔ ɖe ɖoɖo nu, eƒe titrime, eƒe sesẽme, eƒe anyigba, amadede, eƒe nugbɔ ƒe nɔnɔme kple eƒe babla me. Be nàƒo asa na nyayɔyɔ si mesɔ o la, na nyadzɔdzɔŋlɔlawo kple dɔwɔwɔ ŋuti nyatakaka ŋutɔŋutɔ tsɔ wu be nàbia pad le A3 alo A4 ƒe lolome ko nu.
| RFQ Nyatakakawo | Tsitotsito be Woana |
|---|---|
| Laminator ƒe mɔ̃ | Brand, model, dzoxɔxɔ/fafa mɔnu kple kasɛt ƒomevi |
| Plɛti / Pad ƒe Agbɔsɔsɔme | Didime, kekeme, dzogoe ƒe didime, dowo, dowo kple nugbɔ ƒe ʋuʋu ƒe nɔnɔmetata |
| Kaadi ƒe nɔnuwo ƒe s | PVC , PETG , ABS , PC , RFID prelam, Overlay film ƒomevi kple stack ƒe titrime bliboa |
| Zi Nuɖaɖa ŋuti mɔfiame dzi | Dzoxɔxɔ kple fafa ƒe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi kple tsatsam le dɔtrɔɣi ɖesiaɖe me |
| Fifia ƒe Pad | Nusiwo wotsɔ wɔe, eƒe titrime, eƒe sesẽme, subɔsubɔ ƒe agbenɔƒe, fotowo kple nusiwo gblẽ fifia |
| Lɔlɔ̃ Ðe Edzi ƒe Taɖodzinu | Flatness, surface finish, peel strength, cycle time kple dzidzenu siwo wokpɔ mɔ be woatsɔ aɖɔlii |
| Nudɔdɔ Ŋuti Nyatakakawo | Kpɔɖeŋu agbɔsɔsɔme, agbɔsɔsɔ gbogbotɔ, nubablɛ, dzeside kple teƒe si woayi |
Kpɔ didime, titrime le teƒe geɖe, anyigba ƒe nɔnɔme, nugbɔ ƒe nyonyome, amadede, mɔfiame ƒe dzesi kple ŋusẽdodo si woate ŋu akpɔ. Le afisiwo wogblɔe le la, tsɔ sesẽme alo nutete ƒe nuwɔna sɔ kple kpɔɖeŋu si dzi woda asi ɖo.
Ƒu du teƒenɔlawo ƒe agbalẽvi gbalẽviwo to taɖodzinu ƒe nyadzɔdzɔgbalẽ ƒe nuɖaɖa zazã me. Da asi ɖe pad la dzi ne ètsɔ dzoxɔxɔ ƒe ŋuɖoɖo, kaɖi ƒe gbadzaƒe si wowu enu, kadodo, anyigba ƒe asitɔtrɔ kple nusiwo gblẽ le dɔa ŋu sɔ kple Sika Kpɔɖeŋu.
Tsɔ pad la ɖɔ li alo tsɔe ɖe vovo ne eƒe titrime bu tegbee, eƒe nutete si mesɔ o, eƒe gbagbã, ka siwo woɖe ɖe go, teƒe siwo sesẽ, ɖiƒoƒo si wotsɔ de eme, eƒe nugbɔ gblẽ alo tɔtrɔ si woate ŋu adzidze le lamination yield me. Ele be woatsɔ tsatsam ŋutɔŋutɔwo kple nɔnɔmea akpɔ subɔsubɔ ƒe agbenɔƒe tsɔ wu be woatsɔ xexlẽdzesi si woɖo ɖi na xexeame katã.
Wallis naa nusiwo wotsɔ wɔa kaɖiwo abe core sheets, Overlay film s, RFID inlays, lamination steel plates kple press pads. Esia wɔnɛ be B2B nuƒlelawo te ŋu léa ŋku ɖe cushion pad la ŋu ɖekae kple card stack bliboa tsɔ wu be woadae kpɔ be enye kpeɖeŋutɔ si ɖe eɖokui ɖe aga.
Ne èdi dɔa ƒe dzedze la, bia pad ƒe kpɔɖeŋu, mɔ̃ɖaŋununya ƒe nɔnɔmetata, lãɖeɖe ƒe nɔnɔmetata kple dodokpɔ ƒe ɖoɖo. Ele be woaɖo kpe nuwɔwɔ ƒe nyawo abe dɔwɔwɔ ƒe agbenɔƒe, nusiwo gblẽ dzi ɖeɖe kpɔtɔ kple tsatsam ƒe ɣeyiɣi ƒe nyonyome dzi le asisi la ƒe mɔ̃ kple kaɖi ƒe ɖoɖo si dzi woda asi ɖo dzi.
Enye agbalẽtamɔ̃ si woate ŋu azã ake alo esi woate ŋu azã ake si kpena ɖe ame ŋu wòmaa nyaƒoɖeamenu eye wòkpɔa dzoxɔxɔ ƒe tsɔtsɔ yi teƒe bubu dzi le dɔwɔƒewo ƒe kaɖi ƒe lamination kasɛt me. Ewɔa dɔ kple gakpo gbadzɛwo, asiɖeɖe le ƒuƒoƒoawo kple kaɖi ƒe agbalẽvi le mɔ̃a koŋ ƒe stack ƒe nɔnɔme nu.
Ao, akɔtaɖonu la nye nusi wotsɔ xea mɔ na nyaƒoɖeamenu si wɔ ɖeka, gake gakpoa ya tsɔa keklẽ, matte alo nɔnɔmetata si wotia la yia teƒe bubu eye wònaa anyigba sesẽ si le gbadzaa ƒoa xlã kaɖia ƒe ƒuƒoƒoa.
Nusiwo woatsɔ aɖoe nɔ te ɖe laminator kple kasɛt ƒe nɔnɔme dzi. Wɔ ɖe mɔ̃a ƒe mɔfiamegbalẽ kple stack ƒe nɔnɔmetata si dzi woda asi ɖo dzi. Zi geɖe la, wotsɔa agbalẽvi la dana ɖe kaɖigbalẽa kple nuwuƒe ƒe agbalẽviwo godo, eye womezãnɛ abe nusi ŋu womeɖo kpee o si woate ŋu aƒo ka na ame tẽe ene ɖe kaɖi siwo wota dzi o.
Woate ŋu ada pad aɖe kpɔ le nu vovovowo me, gake nyadzɔdzɔŋlɔlawo ƒe nuɖaɖa kple dzoxɔxɔ ƒe ŋuɖoɖo to vovo. Da asi ɖe PVC , PETG , ABS alo PC kaɖi ƒe ɖoɖo ɖesiaɖe dzi ɖe vovo hafi nàwɔe.
Fifia ƒe nufiame ƒe didime nye 1.5–3.5mm. Tiatia nɔ te ɖe kasɛt ƒe ʋuʋu, stack ƒe tɔtrɔ, pad ƒe sesẽ, nyaƒoɖeamenu, dzoxɔxɔ ƒe duƒuƒu kple fexexe si wodi dzi. Pad si le kpekpem wu menyona le eɖokui si o.
Axa si dzi woŋlɔ nu ɖo fifia enye 120–180°C. Ele be woaɖo kpe dzoxɔxɔ ƒe dzidzenu si yia edzi kple esi de ŋgɔ wu dzi na xɔ si wotia eye woatsɔe asɔ kple nyadzɔdzɔŋlɔlawo ƒe tsatsam ŋutɔŋutɔ.
Ate ŋu akpe ɖe ame ŋu be nyaƒoɖeamenu kple dzoxɔxɔ ƒe nɔnɔme nanyo ɖe edzi, gake mate ŋu aka ɖe edzi be agbalẽvi siwo me nu gblẽ le o. Ele be woakpɔ tsidzadza, ink ƒe dɔyɔyɔ, ya si xe mɔ na, dzoxɔxɔ ƒe agbɔsɔsɔ, fafa kple nusiwo wotsɔ wɔe ƒe ɖekawɔwɔ hã dzi.
Xexeame katã ƒe tsatsam ƒe xexlẽme aɖeke meli o. Agbe nɔ te ɖe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi, dzadzɛnyenye, nudzraɖoƒe, pad wɔwɔ kple ɖiƒoƒo dzi. Track ƒe titrime, compression nɔnɔme kple ewɔwɔ ƒe kutsetse.
Zã dzadzɛnyenyemɔnu si dzi woda asi ɖo si mevuvu, melɔ̃ alo ƒo ɖii o ko. Dzra pad la ɖo gbadzaa, wòanɔ dzadzɛ eye wòaƒu, le adzɔge tso nu ɖaɖɛwo, dzoxɔxɔ kple ɣe ƒe keklẽ tẽ gbɔ. Mègablae o.
Ẽ, woate ŋu adoe kpɔ. RFID inlays ateŋu akpɔ teƒea ƒe titrime ƒe tɔtrɔ ƒo xlã chips kple antenna joints, eyata da asi ɖe pad la dzi kple prelam ŋutɔŋutɔ, gakpo gbadzɛwo, nyadzɔdzɔŋlɔlawo ƒe nuɖaɖa kple RF dɔwɔwɔ.
Woate ŋu ato didime, kekeme, titrime, sesẽme, nugbɔ ƒe nɔnɔme kple do siwo wowɔ ɖe ɖoɖo nu me. Na didime ƒe nɔnɔmetata kple mɔ̃ ƒe kpɔɖeŋu ale be woate ŋu alé ŋku ɖe nyatamɔ̃ si woate ŋu azã kple teƒe siwo woɖe mɔ ɖo ŋu.
Na laminator ƒe kpɔɖeŋu, agbalẽvi ƒe lolome, pad ƒe nɔnɔmetata, kaɖi ƒe nuzazãwo, stack ƒe titrime bliboa, dzoxɔxɔ, nyaƒoɖeamenu, tsatsam ƒe ɣeyiɣi, fifi pad nyatakakawo, nɔnɔme madeamedzi siwo wokpɔ, nudɔdɔ ƒe agbɔsɔsɔ kple teƒe si woayi.
